Drop log group of non existing thread

How to drop an non-existing thread log group.
My database doesn't have thread 3; this has been added during cloning from 3 node to 2 node RAC.
alter database drop logfile group 10
ERROR at line 1:
ORA-01623: log 10 is current log for instance UNNAMED_INSTANCE_3 (thread 3) - cannot drop
ORA-00312: online log 10 thread 3: '+DATA/devdb/onlinelog/group_10.560.811225745'
ORA-00312: online log 10 thread 3: '+FLASHBACK/devdb/onlinelog/group_10.360.811225745'
GROUP#    THREAD#     seq#    STATUS
10                    3               1         ACTIVE             
11                    3               0         UNUSED

Hi,
It seems that Group 10 of Thread 3 is still used as its status is current.
Please try to do
alter system switch logfile;
alter system checkpoint;And see whats the status for thread 3 and also verify if really thread 3 is now required.
And you can always disable this thread if now required.
Thanks,
Navneet

Similar Messages

  • Adding bigger size Redo log groups In RAC , ASM

    Hi Folks,
    Database version - 10.1.0.4.0
    OS version - AIX 5.3
    RAC node 2 and ASM
    We had 4 redo log groups of lesser size on both nodes.yesterday I added 4 new groups of bigger size using pl/sql developer tool and deleted 2 old redolog groups. But I m not able to delete remaining 2 old groups.
    ORA-01567 dropping log2 would have less than 2 log files for instance 1.
    Our redolog files are on SAN and both node points to same storage. when I fired this query from command prompt
    SELECT v$logfile.member, v$logfile.group#, v$log.status, v$log.bytes
         FROM v$log, v$logfile
    WHERE v$log.group# = v$logfile.group#;
    I got same result for both nodes.
    The problem I suspect is that All the 4 new log groups are added to instance 2 and its 2 old grouips are are also deleted.
    Now my ques is that :
    1. shouild I have added redo log groups separately on both nodes even storage is same for both nodes ?
    2. redologs groups are defined separately for each node ?
    How should I assign 2 new redo log groups to instance 1 ?
    Regards,

    Please check:
    SQL> select instance_number, instance_name, thread# from gv$instance;
    Show Instance with thread ID
    SQL> select group#, thread#, members ,status from v$log;
    Check number groups in each of thread.
    On RAC, you have to add redo log Group each of node (each of thread )
    SQL> select group#, thread#, members ,status from v$log;
    From your environment ,I think you have 2 nodes = 2 thread
    If these're thread 1, 2
    So, add redo group should:
    Example:
    ALTER DATABASE ADD LOGFILE THREAD 1 GROUP 11 ( '+DATA') SIZE 500M;
    ALTER DATABASE ADD LOGFILE THREAD 1 GROUP 12 ( '+DATA') SIZE 500M;
    ALTER DATABASE ADD LOGFILE THREAD 2 GROUP 13 ( '+DATA') SIZE 500M;
    ALTER DATABASE ADD LOGFILE THREAD 2 GROUP 14 ( '+DATA') SIZE 500M;
    You should check each thread has >= 2 groups and that group had "INACTIVE" status before drop:
    SQL> select group#, thread#, members ,status from v$log;
    My Idea, you should have 3 redo log groups for each node(thread)
    Good Luck

  • Post activity for drop & recreating log group

    Hi,
    We need to drop redolog group from old file system & going to recreate in different file system.
    ex,
    when group 3 is in "INACTIVE"
    alter database drop logfile group 3;
    alter database add logfile group 3 ('/u01/oracle/ica01/log3.ora,'/u01/oracle/ica02/log3.ora’ ) size 2G;
    Is there any post activity to update in control files or any other things ?
    Thx,
    Gowin.

    Osama_mustafa wrote:
    you need to rename logfile on OS Level "Physically" or you move them to another location.
    http://docs.oracle.com/cd/B28359_01/server.111/b28310/onlineredo004.htm
    That's if you are moving an existing file. The OP was asking about dropping an existing file and creating a new one. While the purpose may be the same (to relocate a file), the technique is vastly different and so the answer to his question is vastly different.
    To the OP: as you described your actions of dropping a redo log group and "recreating" it, the answer is no, there is no follow up work to be done. You did two logically un-connected actions:
    First, you dropped a redo log group. Fine. That is easily done online with no impact to the users and requires no follow-up actions.
    Second, you created a redo log group. Fine. That is easily done online with no impact to the users and requires no follow-up actions.
    The fact that the new redo log group has the same group name as the former - now non-existent - group is merely coincidental.

  • Unable to drop a Redo Log Group

    Hi,
    My database is running on version 11.1.0.7 on OEL platform.
    I am trying to delete one of the Active Redo Log Group, it fails with the below error. Could someone please help me fix this issue?
    SQL >  select * from v$log;
        GROUP#    THREAD#  SEQUENCE#      BYTES    MEMBERS ARCHIVED  STATUS                                           FIRST_CHANGE# FIRST_TIME
            10          1       8017  524288000          2 YES       INACTIVE                                            1.2120E+13 17-JUN-2012 19:43:49
            11          1       8018  524288000          2 YES       INACTIVE                                            1.2120E+13 18-JUN-2012 06:49:45
            12          1       8019  524288000          2 YES       INACTIVE                                            1.2120E+13 18-JUN-2012 16:56:43
            13          1       8021  524288000          2 YES       INACTIVE                                            1.2120E+13 18-JUN-2012 23:18:07
            14          1       8020  524288000          2 YES       INACTIVE                                            1.2120E+13 18-JUN-2012 23:14:27
            15          1       8022  524288000          2 NO        CURRENT                                             1.2120E+13 19-JUN-2012 01:07:27
            16          2       6835  524288000          2 YES       INACTIVE                                            1.2120E+13 18-JUN-2012 23:15:46
            17          2       6836  524288000          2 YES       INACTIVE                                            1.2120E+13 18-JUN-2012 23:18:04
            18          2       6837  524288000          2 YES       INACTIVE                                            1.2120E+13 18-JUN-2012 23:20:22
            19          2       6838  524288000          2 YES       INACTIVE                                            1.2120E+13 18-JUN-2012 23:22:38
            20          2       6839  524288000          2 NO        CURRENT                                             1.2120E+13 19-JUN-2012 01:07:24
            21          2       6832  524288000          2 YES       INACTIVE                                            1.2120E+13 18-JUN-2012 23:11:45
            22          3       3771  524288000          2 YES       INACTIVE                                            1.2103E+13 09-SEP-2011 22:04:11
            23          3       3772  524288000          2 YES       INACTIVE                                            1.2103E+13 09-SEP-2011 23:55:55
            24          3       3773  524288000          2 YES       ACTIVE                                              1.2103E+13 09-SEP-2011 23:55:59
            25          3       3766  524288000          2 YES       INACTIVE                                            1.2103E+13 08-SEP-2011 22:05:29
            26          3       3767  524288000          2 YES       INACTIVE                                            1.2103E+13 08-SEP-2011 22:05:50
            27          3       3768  524288000          2 YES       INACTIVE                                            1.2103E+13 09-SEP-2011 14:02:05
    SQL > archive log list;
    Database log mode              Archive Mode
    Automatic archival             Enabled
    Archive destination            /archive/MYCSMA/MYCSMA2
    Oldest online log sequence     6832
    Next log sequence to archive   6839
    Current log sequence           6839
    SQL > archive log all;
    ORA-00271: there are no logs that need archiving
    SQL > ALTER SYSTEM ARCHIVE LOG GROUP 24;
    ALTER SYSTEM ARCHIVE LOG GROUP 24
    ERROR at line 1:
    ORA-16013: log 24 sequence# 3773 does not need archiving
    SQL > alter database drop LOGFILE  group 24;
    alter database drop LOGFILE  group 24
    ERROR at line 1:
    ORA-01623: log 24 is current log for instance MYCSMA3 (thread 3) - cannot drop
    ORA-00312: online log 24 thread 3: '/u247/oradata/MYCSMA/redo24_1.log'
    ORA-00312: online log 24 thread 3: '/u247/oradata/MYCSMA/redo24_2.log'This was previously a 3 node RAC and when it was moved to a different machine, it got build with a 2-node RAC.
    Hence thread 3 is no more required. Thats why I am planning to drop these Redo Log Groups.
    Thanks!

    Hi;
    All information cover at:
    NOTE:102995.1 - Maintenance of Online Redo Log Groups and Members
    Regard
    Helios

  • ORA-00313: open failed for members of log group 2 of thread 1

    We have a 4 node 32bit linux RAC (Dell/EMC) system running 9.2.0.4. It is very stable but over the past couple of months we've encountered a few ORA-00313 errors, while the system is running.
    No patterns. Different loads, times of day, nodes.
    The redo can't be opened, the node crashes, we look for errors, can't find any and then restart. The file is there and the permissions are fine. No other processes are accessing the files. No other Db errors. No O/S, SAN, Fiber, errors.
    All the research I've done shows that this is an error you'd only get on startup.
    We're going to log a TAR, but I can't believe we're the only ones to ever see this occur.
    [directory and server names have been modified to protect the system. Don't get hung up on typos or possible file system config problems too much - this system has been and is running now]
    ======================================================
    Log entries:
    Mon Oct 24 22:51:58 2005
    Errors in file /u01/app/oracle/admin/sampdb/bdump/sampdb1_lgwr_2237.trc:
    ORA-00313: open failed for members of log group 2 of thread 1
    ORA-00312: online log 2 thread 1: '/sampledb/redo0/oradata/sampdb/redo/redo102.log'
    ORA-27041: unable to open file
    Linux Error: 13: Permission denied
    Additional information: 2
    Mon Oct 24 22:51:58 2005
    Errors in file /u01/app/oracle/admin/sampdb/bdump/sampdb1_lgwr_2237.trc:
    ORA-00313: open failed for members of log group 2 of thread 1
    ORA-00312: online log 2 thread 1: '/sampledb/redo0/oradata/sampdb/redo/redo102.log'
    ORA-27041: unable to open file
    Linux Error: 13: Permission denied
    Additional information: 2
    Mon Oct 24 22:51:58 2005
    LGWR: terminating instance due to error 313
    Below are the contents of the trace file mentioned in the above log:
    trace file /u01/app/oracle/admin/sampdb/bdump/sampdb1_lgwr_2237.trc:
    [oracle@db1 bdump]$ more /u01/app/oracle/admin/sampdb/bdump/sampdb1_lgwr_2237.trc
    /u01/app/oracle/admin/sampdb/bdump/sampdb1_lgwr_2237.trc
    Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
    With the Partitioning, Real Application Clusters, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.4.0 - Production
    ORACLE_HOME = /u01/app/oracle/product/920
    System name: Linux
    Node name: db1.sample.com
    Release: 2.4.9-e.59enterprise
    Version: #1 SMP Mon Jan 17 07:02:16 EST 2005
    Machine: i686
    Instance name: sampdb1
    Redo thread mounted by this instance: 0 <none>
    Oracle process number: 24
    Unix process pid: 2237, image: [email protected] (LGWR)
    *** SESSION ID:(25.1) 2005-10-11 22:31:02.315
    CMCLI WARNING: CMInitContext: init ctx(0xad96e80)
    *** 2005-10-24 22:51:58.192
    ORA-00313: open failed for members of log group 2 of thread 1
    ORA-00312: online log 2 thread 1: '/sampledb/redo0/oradata/sampdb/redo/redo102.log'
    ORA-27041: unable to open file
    Linux Error: 13: Permission denied
    Additional information: 2
    error 313 detected in background process
    ORA-00313: open failed for members of log group 2 of thread 1
    ORA-00312: online log 2 thread 1: '/sampledb/redo0/oradata/sampdb/redo/redo102.log'
    ORA-27041: unable to open file
    Linux Error: 13: Permission denied
    Additional information: 2
    ksuitm: waiting for [5] seconds before killing DIAG

    The only thing I can still think of is file permissions.
    If the system has recently been restored or Redo Log recreated, check the file permissions and ensure that Oracle has Read and Write Access to the Directory and Files.
    At least the file permissions on the directory and files should look something like this example
    $ls -l /sampledb/redo0/oradata/sampdb/
    drwxr-xr-x oracle oinstall 4096 19 May 17:46 redo
    $ls -l /sampledb/redo0/oradata/sampdb/redo/
    -rw-r----- oracle oinstall 524288512 27 Oct 15:07 redo101.log
    $ls -l /sampledb2/redo0/oradata/sampdb/redo2/
    -rw-r----- oracle oinstall 524288512 27 Oct 15:21 redo102.log
    $ls -l /sampledb3/redo0/oradata/sampdb/redo3/
    -rw-r----- oracle oinstall 524288512 27 Oct 15:33 redo103.log

  • ORA-00313: open failed for members of log group 4 of thread 2

    Hi.
    i have found the below error in one of RAC instance.Could you please advise on this since i am new to RAC env
    ORA-00313: open failed for members of log group 4 of thread 2
    ORA-00312: online log 4 thread 2: '+NEWDISK_GROUP/DEMO/onlinelog/group_4.1453.1029312423'
    ORA-17503: ksfdopn:2 Failed to open file +NEWDISK_GROUP/DEMO/onlinelog/group_4.1453.1029312423
    ORA-15032: not all alterations performed
    ORA-29702: error occurred in Cluster Group Service operation
    ORA-29702: error occurred in Cluster Group Service operation
    Thanks
    Sai

    any update on this?

  • Standby redo log group for particular thread

    hi masters,
    actually i am performing an experiment to create physical standbyt database on the same machine as my primary database.
    i ma going according to 'data guard admin guide'. while section for ading standby redo log group,it says that you have to add standby redo log group to "thread"....
    what is this thread? and how can i foind to which thread i have to assign the next redo log group??
    how can i find current thread??
    what if i dont add "to thread' clause in my statement:-
    ALTER DATABASE ADD STANDBY LOGFILE THREAD 5
    2> ('/oracle/dbs/log1c.rdo','/oracle/dbs/log2c.rdo') SIZE 500M;
    thanks and regards
    VD

    Vikrant,
    First a question: Do you have a RAC instance? If so the paragraph even doesn't apply to you and I'm not sure why you are questioning it.
    Secondly
    "The THREAD clause is required only if you want to add one or more standby redo log
    file groups to a specific primary database thread. If you do not include the THREAD
    clause and the configuration uses Real Application Clusters (RAC), Data Guard will
    automatically assign standby redo log file groups to threads at runtime as they are
    needed by the various RAC instances."
    this means you dont have to specify thread for RAC,as it will allocate one according to current thread.
    Your conclusion is incorrect.
    Where do you read the word 'current'?
    Oracle will likely simply make sure each instance has sufficient standby redolog groups, the requirement is 1 standby redolog group per group + 1 extra.
    Sybrand Bakker
    Senior Oracle DBA

  • ORA-00313: open failed for members of log group 1 of thread 1

    Hi
    I'm restoring a database on a different host. I have the backups, from which I want to restore the database. I made the corresponding changes in the initSID.ora file and started the script to do the restore.These are the steps I followed:
    connect target=/
    run{
    startup nomount;
    allocate channel c1 type disk;
    allocate channel c2 type disk;
    allocate channel c3 type disk;
    allocate channel c4 type disk;
    restore controlfile from '/tmp_backups/rman/lev0_open_cf_SID_2826_1';
    alter database mount;
    set newname for all datafiles
    restore database;
    set until logseq = 29317 thread = 1;
    switch datafile all;
    recover database;
    alter database open resetlogs;
    One mistake I made here is that logseq should have been last seq+1, which I did not do. I have it as last seq.
    Restore of datafiles and switching of datafiles was fine. But I get error for redo log files.
    ORA-00313: open failed for members of log group 1 of thread 1
    ORA-00312: online log 1 thread 1: '/u13/oradata/SID/redo02a.log'
    ORA-27037: unable to obtain file status
    SVR4 Error: 2: No such file or directory
    Additional information: 3
    Why is it looking for at the old path yet?
    I'm not sure what I missed and how to proceed. Please help.
    Thanks,
    Mamata

    I do believe that set newname for all datafiles only means actual datafiles and no redo logs. So with open resetlogs, Oracle tries to create new redo logfiles where the backup controlfiles says they are.
    As with creating a auxilliary database in another filesystem, we use DB_NAME_FILE_CONVERT and LOG_FILE_NAME_CONVERT.
    I am not sure if it is possible to type "set newname for all datafiles" and expect also the redo logfiles to change location.
    You might try to set these two parameters and see if it works.
    good luck.
    rgds
    Kjell Ove

  • ORA-00313: open failed for members of log group 3 of thread 1

    Whenever I try to login as a user I get the following:
    sqlplus user/user
    SQL*Plus: Release 10.2.0.2.0 - Production on Fri Nov 9 10:43:39 2007
    Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    So It occurs to me to login as sysdba and restart the DB …
    SQL> connect sys/manager as sysdba
    Connected.
    SQL> shutdown immediate;
    ORA-01109: database not open
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup
    ORACLE instance started.
    Total System Global Area 536870912 bytes
    Fixed Size 1281264 bytes
    Variable Size 150995728 bytes
    Database Buffers 377487360 bytes
    Redo Buffers 7106560 bytes
    Database mounted.
    ORA-00313: open failed for members of log group 3 of thread 1
    ORA-00312: online log 3 thread 1: '/u06/oradata/RKDB/redo03.log'
    ORA-27037: unable to obtain file status
    Intel SVR4 UNIX Error: 2: No such file or directory
    Additional information: 3
    SQL> quit
    I now realized what happened and how this happened. During a clean-up effort this file was accidentally deleted and unfortunately we don’t have any backups.
    I am willing to lose the data. Is there something I can do so that the startup does not try to open this file ?
    All I am able to do now is to mount the database but not open it.
    Thanks in advance,
    Daniel

    this is what I get now ...
    SQL> alter database open resetlogs;
    alter database open resetlogs
    ERROR at line 1:
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '/u02/oradata/RKDB/system01.dbf'
    SQL> Recover database until cancel;
    ORA-00279: change 608619 generated at 11/09/2007 10:00:41 needed for thread 1
    ORA-00289: suggestion : /u05/oradata/RKDB/arch/log1_33_633207859.arc
    ORA-00280: change 608619 for thread 1 is in sequence #33
    Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
    ORA-00308: cannot open archived log
    '/u05/oradata/RKDB/arch/log1_33_633207859.arc'
    ORA-27037: unable to obtain file status
    Intel SVR4 UNIX Error: 2: No such file or directory
    Additional information: 3
    ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '/u02/oradata/RKDB/system01.dbf'
    SQL> alter database open resetlogs;
    alter database open resetlogs
    ERROR at line 1:
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '/u02/oradata/RKDB/system01.dbf'
    SQL>

  • Multiple log groups per thread to improve performance with high redo writes

    I am reading Pro Oracle 10g RAC on Linux (good book). On p.35 the authors state that they recommend 3-5 redo log groups per thread if there is a "large" amount of redo.
    Who does having more redo log groups improve performance? Does oracle paralelize the writes?

    redo logs are configured per instance, from experience you need atleast 3 redo log groups per thread to help switch over and sufficient time for archives to complete before reuse of the first redo log group. When you have a large redo log activity there is a potential that redo log groups will switch more often and it is important that archive has completed before an exisiting redo log group can be reused, else the database /instance may hang.
    I think that is what the author is referencing here, have sufficient redo log groups (based on the acitivty of your environment) to allow switching and allowing sufficient time for archives to complete.

  • Non-existent uid show as members of group

    I'm thinking this might be a manual process, but I'll pose the question anyway.
    I have a GroupOfNames - cn=group, ou=mygroups, dc=mydomain, dc=com
    This group has many uniqueMembers and is forever changing - additions, deletions happen every day.
    My question is: When I delete a user account from the LDAP, there is really nothing within that record to indicate that the user is a member of a group. So, I could have potentially hundreds of non-existent users listed as members of a group, with no way other than a manual process to go in and clean things up.
    Is this the dumbest question of all time? or do I have a valid concern?
    TIA
    Rick

    http://docs.sun.com/app/docs/doc/820-2763/fsush
    Your concern is quite valid and this plugin handles it for you. Play with it on a test instance and make sure the indexes are done correctly as it causes a lot of problems if misconfigured.

  • User or group does not exists.

    Hi,
    I am running an unattented installation of SQL on a server. I run it with the following configuration:
    ;SQLSERVER2008 Configuration File
    [SQLSERVER2008]
    ;************************* CORE ARGUMENTS *************************
    ; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will reflect the instance ID of the SQL Server instance. 
    INSTANCEID="MSSQLSERVER"
    ; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter. 
    ACTION="Install"
    ; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, and Tools. The SQL feature will install the database engine, replication, and full-text. The Tools feature will install Management Tools, Books
    online, Business Intelligence Development Studio, and other shared components.
    FEATURES=SQLENGINE,REPLICATION,FULLTEXT,AS,RS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK
    ; Setup will not display any user interface. ***
    QUIET="True"
    ; Needed argument for silent installation
    IACCEPTSQLSERVERLICENSETERMS="True"
    ;*************************** OPTIONAL *****************************
    ; Displays the command line parameters usage 
    HELP="False"
    ; Specifies that the detailed Setup log should be piped to the console. ***
    INDICATEPROGRESS="True"
    ; Setup will display progress only without any user interaction.
    QUIETSIMPLE="False"
    ; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system. 
    X86="False"
    ; Use this parameter to install the English version of SQL Server on a localized operating system when the installation media includes language packs for both English and the language corresponding to the operating system.
    ENU="True"
    ; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature. 
    ERRORREPORTING="False"
    ; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature. 
    SQMREPORTING="False"
    ; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting
    Services (RS). 
    INSTANCENAME="MSSQLSERVER"
    ; Agent account name 
    AGTSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Auto-start service after installation.  ***
    AGTSVCSTARTUPTYPE="Automatic"
    ; Startup type for Integration Services. 
    ISSVCSTARTUPTYPE="Automatic"
    ; Account for Integration Services: Domain\User or system account. 
    ISSVCACCOUNT="NT AUTHORITY\NetworkService"
    ; The name of the account that the Analysis Services service runs under. 
    ASSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Controls the service startup type setting after the service has been created. 
    ASSVCSTARTUPTYPE="Automatic"
    ; The collation to be used by Analysis Services. 
    ASCOLLATION="Latin1_General_CI_AS"
    ; The location for the Analysis Services data files. 
    ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data"
    ; The location for the Analysis Services log files. 
    ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Log"
    ; The location for the Analysis Services backup files. 
    ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Backup"
    ; The location for the Analysis Services temporary files. 
    ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Temp"
    ; The location for the Analysis Services configuration files. 
    ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config"
    ; Specifies whether or not the MSOLAP provider is allowed to run in process. 
    ASPROVIDERMSOLAP="1"
    ; Specifies the list of administrator accounts that need to be provisioned. 
    ASSYSADMINACCOUNTS=”CRB\dsstest”
    ; Startup type for the SQL Server service. 
    SQLSVCSTARTUPTYPE="Automatic"
    ; Specifies a Windows collation or an SQL collation to use for the Database Engine. 
    SQLCOLLATION="SQL_Latin1_General_CP1_CI_AS"
    ; Account for SQL Server service: Domain\User or system account. 
    SQLSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Windows account(s) to provision as SQL Server system administrators. 
    SQLSYSADMINACCOUNTS=”CRB\dsstest”
    ; Level to enable FILESTREAM feature at (0, 1, 2 or 3). 
    FILESTREAMLEVEL="0"
    ; Set to "1" to enable RANU for SQL Server Express. 
    ENABLERANU="False"
    ; Specify 0 to disable or 1 to enable the TCP/IP protocol. 
    TCPENABLED="1"
    ; Specify 0 to disable or 1 to enable the Named Pipes protocol. 
    NPENABLED="0"
    ; Startup type for Browser Service. 
    BROWSERSVCSTARTUPTYPE="Automatic"
    ; Specifies which account the report server NT service should execute under.  When omitted or when the value is empty string, the default built-in account for the current operating system.
    ; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
    ; The domain part of RSSVCACCOUNT is a maximum of 254 characters long. 
    RSSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Specifies how the startup mode of the report server NT service.  When 
    ; Manual - Service startup is manual mode (default).
    ; Automatic - Service startup is automatic mode.
    ; Disabled - Service is disabled 
    RSSVCSTARTUPTYPE="Automatic"
    ; Specifies which mode report server is installed in.  
    ; Default value: “FilesOnly”  
    RSINSTALLMODE="DefaultNativeMode"
    ; Full-Text filter launcher service account
    FTSVCACCOUNT="NT AUTHORITY\LOCAL SERVICE"
    I run the installation with the user crb\dsstest, but i get the following error:
    2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
    2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
    2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    2011-12-28 12:59:02 Slp: Inner exceptions are being indented
    2011-12-28 12:59:02 Slp: 
    2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
    2011-12-28 12:59:02 Slp:     Message: 
    2011-12-28 12:59:02 Slp:         ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp:     Data: 
    2011-12-28 12:59:02 Slp:       SQL.Setup.FailureCategory = InputSettingValidationFailure
    2011-12-28 12:59:02 Slp:       DisableWatson = true
    2011-12-28 12:59:02 Slp:     Stack: 
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:59:02 Slp:     Inner exception type: System.ApplicationException
    2011-12-28 12:59:02 Slp:         Message: 
    2011-12-28 12:59:02 Slp:                 ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp: 
    2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
    2011-12-28 12:59:02 Slp: 
    2011-12-28 12:59:02 Slp: Error result: -2068578304
    2011-12-28 12:59:02 Slp: Result facility code: 1204
    2011-12-28 12:59:02 Slp: Result error code: 0
    Can anyone help me?

    Hi,
    I have tried to chech if it exists. If I add the user dsstest during the normal installation it is found. I am also logged in as the user dsstest. Then everything should be okay rigth, or is there anything else i can check?
    The following are the error details:
    2011-12-28 12:58:47 AS: Action: (Validation) Validating SysAdmin Accounts
    2011-12-28 12:58:47 AS: Action: Validation User Account (”CRB\dsstest”)
    2011-12-28 12:58:47 AS: Action: Validating Account
    2011-12-28 12:58:47 AS: Data: Account=”CRB\dsstest”
    2011-12-28 12:58:47 AS: Data: Account After Mapping = ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: Attempting to get account sid for user account ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: Attempting to get sid for user account ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: GetSidForAccount normalized accountName ”CRB\dsstest” parameter to ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: Failed when querying buffer size
    2011-12-28 12:58:47 AS: Warning: Failed to retrieved Account SID. Reason: No mapping between account names and security IDs was done.
    2011-12-28 12:58:47 AS: Result: Error
    2011-12-28 12:58:47 AS: Result: Invalid
    2011-12-28 12:58:47 AS: Result: (Validation) Complete
    2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation for Analysis Service
    2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Entry
    2011-12-28 12:58:47 AS: Data:  Latin1_General_CI_AS
    2011-12-28 12:58:47 AS: Action: (Utility) Validate Collation Entry
    2011-12-28 12:58:47 AS: Data: Latin1_General_CI_AS
    2011-12-28 12:58:47 AS: Result: (Utility) Valid
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Match
    2011-12-28 12:58:47 AS: Data: ASCollation=Latin1_General_CI_AS,SQLCollation=
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: Action: Detect Whether it is Valid Collation
    2011-12-28 12:58:47 AS: Data: Collation = Latin1_General_CI_AS
    2011-12-28 12:58:47 AS: Action: (Utility) Retrieving embedded content
    2011-12-28 12:58:47 AS: Data: Resource Name =Microsoft.SqlServer.Configuration.ASExtension.LCIDs.xml
    2011-12-28 12:58:47 AS: Result: (Utility) Success
    2011-12-28 12:58:47 AS: Data: Locale ID=0x0409
    2011-12-28 12:58:47 AS: Result: Valid
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: Action: Validating Start Mode
    2011-12-28 12:58:47 AS: Result: Success
    2011-12-28 12:58:47 AS: Action: Validating Allow in Process
    2011-12-28 12:58:47 AS: Data: AllowInProcess=1
    2011-12-28 12:58:47 AS: Result: Success
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: ----------------------------------------------
    2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
    2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\aml021” - User or group does not exists.
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
    2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    2011-12-28 12:59:02 Slp: Inner exceptions are being indented
    2011-12-28 12:59:02 Slp:
    2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
    2011-12-28 12:59:02 Slp:     Message:
    2011-12-28 12:59:02 Slp:         ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp:     Data:
    2011-12-28 12:59:02 Slp:       SQL.Setup.FailureCategory = InputSettingValidationFailure
    2011-12-28 12:59:02 Slp:       DisableWatson = true
    2011-12-28 12:59:02 Slp:     Stack:
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:59:02 Slp:     Inner exception type: System.ApplicationException
    2011-12-28 12:59:02 Slp:         Message:
    2011-12-28 12:59:02 Slp:                 ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp:
    2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
    2011-12-28 12:59:02 Slp:
    2011-12-28 12:59:02 Slp: Error result: -2068578304
    2011-12-28 12:59:02 Slp: Result facility code: 1204
    2011-12-28 12:59:02 Slp: Result error code: 0
    Do you need more information then above? The above chech do not fail for the network service:
    2011-12-28 12:58:46 ACE: Formatting user name 'NT AUTHORITY\NETWORK SERVICE'
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: Formatted user name is 'NT AUTHORITY\NETWORK SERVICE'
    2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword started with userName = 'NT AUTHORITY\NETWORK SERVICE', userNameRequired = 'True', mustBeDomainAcct = 'False'
    2011-12-28 12:58:46 ACE: Validating username 'NT AUTHORITY\NETWORK SERVICE' and password '<empty>'
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: Getting sid for service account 'NT AUTHORITY\NETWORK SERVICE'
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: SID for user account is 'S-1-5-20'
    2011-12-28 12:58:46 ACE: Validating service account is not LocalService
    2011-12-28 12:58:46 ACE: Validating service account is a user account
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 ACE: Validating service account can be used if current machine is domain controller
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: Checking if service account must be a domain account
    2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword completed
    2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/SSIS/Public was found in the datastore.
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/AS/Public was found in the datastore.
    2011-12-28 12:58:46 AS: ----------------------------------------------
    2011-12-28 12:58:46 AS: Action: Logging Input Values and it's Sources
    2011-12-28 12:58:46 AS: Data: Parameter=ASSVCACCOUNT,Source=ConfigFile,Value=NT AUTHORITY\NETWORK SERVICE
    Do you have any idea what is worong?

  • AppleWorks 6 won't launch -invalid/non existent path

    Appleworks 6 was working fine until a few days ago, now it will not launch--just jumps once or twice, and then nothing. Console log says, "launch failed because the application path is invalid or non-existent" Now I can't open my work-related documents at all. Please help!

    Hi, Barry,
    Thank you for your reply--I tried your suggestions--and it did not work.
    I can open saved documents in TextEdit, but not at all in AppleWorks6. Cannot access anything at all, including templates in AppleWorks6. I followed the threads and tried other suggestions, and Nothing!.
    I can see AppleWorks in finder, with all necessary folders in a row (I didn't move any), but when I try to open AppleWorks, it's as if it didn't exist at all. Plus, lots of documents won't even open in Adobe reader, either--and I used to be able to, before.
    I am so behind my work--do I have to dig out my typewriter?
    I appreciate your help.
    Thank you.
    ceecee169

  • Redo Log Groups

    Call me stupid, but for some reason I've decided to get certified as a DBA even though I have always been a developer. Honestly, its not my fault. The choices in the development track are pretty boring...
    Anyway, while pouring through the Backup/Recovery documentation, I run across this:
    Every database must have at least two online redo log groups.
    Each redo log group contains at least one online redo log member,
    which is a physical file containing the redo records.I decided to check and see if I have "at least two online redo log groups" for my play database. Now, I am very very confused.
    I think this query shows my 3 log members, but for some reason the 1st column makes me think I have 3 log groups:
    select group#, member from v$logfile
        GROUP# MEMBER
             3 /var/opt/oracle/oradata/db92/redo03.log
             2 /var/opt/oracle/oradata/db92/redo02.log
             1 /var/opt/oracle/oradata/db92/redo01.logI only know of one place where my online redo is located:
    ls $ORACLE_BASE/oradata/db92
    redo01.log  redo02.log  redo03.logCan someone help me figure out if I have one-group and three-members??
    Any comments are welcome,
    Stan

    This information can help you:
    Adding Redo Log File Groups: Examples
    The following statement adds a redo log file group with two members and identifies it with a GROUP parameter value of 3:
    ALTER DATABASE
    ADD LOGFILE GROUP 3
    ('diska:log3.log' ,
    'diskb:log3.log') SIZE 50K;
    The following statement adds a redo log file group containing two members to thread 5 (in a Real Application Clusters environment) and assigns it a GROUP parameter value of 4:
    ALTER DATABASE
    ADD LOGFILE THREAD 5 GROUP 4
    ('diska:log4.log',
    'diskb:log4:log');
    Dropping Log File Members: Example
    The following statement drops one redo log file member added in the previous example:
    ALTER DATABASE
    DROP LOGFILE MEMBER 'diskb:log3.log';
    The following statement drops all members of the redo log file group 3:
    ALTER DATABASE DROP LOGFILE GROUP 3;
    Adding Redo Log File Group Members: Example
    The following statement adds a member to the redo log file group added in the previous example:
    ALTER DATABASE
    ADD LOGFILE MEMBER 'diskc:log3.log'
    TO GROUP 3;
    Renaming a Log File Member: Example
    The following statement renames a redo log file member:
    ALTER DATABASE
    RENAME FILE 'diskc:log3.log' TO 'diskb:log3.log';
    The preceding statement only changes the member of the redo log group from one file to another. The statement does not actually change the name of the file 'diskc:log3.log' to 'diskb:log3.log'. You must perform this operation through your operating system.
    Joel P�rez

  • How to recover from corrupt redo log file in non-archived 10g db

    Hello Friends,
    I don't know much about recovering databases. I have a 10.2.0.2 database with corrupt redo file and I am getting following error on startup. (db is non archived and no backup) Thanks very much for any help.
    Database mounted.
    ORA-00368: checksum error in redo log block
    ORA-00353: log corruption near block 6464 change 9979452011066 time 06/27/2009
    15:46:47
    ORA-00312: online log 1 thread 1: '/dbfiles/data_files/log3.dbf'
    ====
    SQL> select Group#,members,status from v$log;
    GROUP# MEMBERS STATUS
    1 1 CURRENT
    3 1 UNUSED
    2 1 INACTIVE
    ==
    I have tried this so far but no luck
    I have tried following commands but no help.
    SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 3;
    Database altered.
    SQL> alter database open resetlogs;
    alter database open resetlogs
    ERROR at line 1:
    ORA-01139: RESETLOGS option only valid after an incomplete database recovery
    SQL> alter database open;
    alter database open
    ERROR at line 1:
    ORA-00368: checksum error in redo log block
    ORA-00353: log corruption near block 6464 change 9979452011066 time 06/27/2009
    15:46:47
    ORA-00312: online log 1 thread 1: '/dbfiles/data_files/log3.dbf'

    user652965 wrote:
    Thanks very much for your help guys. I appreciate it. unfortunately none of these commands worked for me. I kept getting error on clearing logs that redo log is needed to perform recovery so it can't be cleared. So I ended up restoring from earlier snapshot of my db volume. Database is now open.
    Thanks again for your input.And now, as a follow-up, at a minimum you should make sure that all redo log groups have at least 3 members. Then, if you lose a single redo log file, all you have to do is shutdown the db and copy one of the good members (of the same group as the lost member) over the lost member.
    And as an additional follow-up, if you value your data you will run in archivelog mode and take regular backups of the database and archivelogs. If you fail to do this you are saying that your data is not worth saving.

Maybe you are looking for

  • Download lyrics to iTunes

    I have over 1,000 songs on my itunes library. Individually update each song lyrics on Windows iTunes (copy paste) would be a bit time consuming . Is there an app that would do the trick? thank you

  • Group by sort order and display accordingly

    I have two groups - primary sort order and a secondary sort order in my report, formula for both follows: If {?Sort Order}='1' then {PRODUCT_CUSTOMER_MNT_V.CUSTOMER_NAME} else if {?Sort Order}='2' then {PRODUCT_CUSTOMER_MNT_V.PRODUCT_ID} else if {?So

  • Mac G5 and CS5

    hello guys, i have simple question. i am going to buy a Mac G5 dual processor and i want to install the CS5 on it. i read on the adobe website that i need a "INTEL" dual core processor. can a G5 run the adobe cs5 or 4? thanks. sorry for the newbie qu

  • End of File for a RandomAccessFile ?

    I was trying to read a file using a random access file.But I am not able find the EOF for the RandomAccessFile...Any ideas ??????

  • JFileChooser - List and Details

    Hi, In the JFileChooser Dialog, we have two buttons "List" and "Details" to view and select the files. The default is "List" mode, when the File Chooser dialog opens. In this mode, if we type in the first character of the file we want to select, then