Drop-Zones Resizing Images

I'm new at this so bear with me if this is a stupid question.
I'm producing a DVD for a recent graduation ceremony and would like to include still images of the printed program as a menu option. I've created the menus, scanned and finished the images in Photoshop. It seems that whenever I add these pictures to drop-zones they are too large to fit the frame. When I resize the images in Photoshop and make the drop zones bigger, the images continue to be resized and the full image is not displayed. Is there any way to lock the size of an image as well as the aspect ratio?
Thanks in advance.

Garrett
to add an image as a drop zone:
drag image from asset tab on to menu editor and select - create drop zone from the pop up
to resize a drop zone:
drag corner or side handle
to resize drop zone maintaining aspect ratio:
shift drag corner handle
move asset within drop zone:
shift option drag the asset with in the drop zone
G

Similar Messages

Drop Zone Resize

I'm using one of the templates in Motion and when I drop in a photo into the drop zone I'd like to resize the dropped in pic. Can't figure out how to do this.
Can it be done?

Dan,
With your drop zone highlighted in the LAYERS tab, go to your Inspector window, click the image tab. you will see your "drop zone" checked. just beneath it is a parameter called "fit". it has 3 choices: fit, center and stretch. I think FIT: fits the image in the drop zone with the correct aspect ratio, CENTER: centers the image at it's original size, in the center of the drop zone, and STRETCH: stretches the image to fill the drop zone.
chose the one that fits your need. you can also make adjustments to the image in the properties tab after you have placed the image in the drop zone. hope this helps
steve

Resize Pictures for Drop Zone?

I read a thread from about a year ago that brought up resizing images to get them to fit in a drop zone correctly. I just started using idvd and just ran into this problem, and it truly annoys me that Apple wouldn't allow resizing and image within idvd to get it to fit, or drag what part of the image shows in the drop zone...
Anyone have a solution, or is this still a "pay to get it" type of thing with pro tools...

So what you really need is to reposition the image within the drop zone (as opposed to resizing) .... is this correct?
If so, have you already tried holding down the control key as you click and drag the image to the desired position?
Repositioning an image or movie in a drop zone
When you drag a picture or movie into a drop zone, the aspect ratio of the image is preserved, but it is scaled larger or smaller to fill the drop zone. As a result, sometimes part of the image is cut off and does not appear in the drop zone. In this case, you can move the image to choose which portion is visible in the drop zone.
To reposition an image or movie in a drop zone:
From the drop zone on the menu (not in the drop zone editor), click the image or movie and press Command.
Drag the image until the part you want is visible in the drop zone.
Keep these things in mind as you position an image:
◼
If you drag a narrow image to a drop zone, the image is scaled vertically, and you can move the image up or down only.
◼
If you drag a wide image to a drop zone, the image is scaled horizontally, and you can move the image side to side only.
◼
If you accidentally drag the image too far, you will remove it from the drop zone. (The cursor changes from a hand to a puff of smoke.) Choose Edit > Undo to restore the image to the drop zone.
Repositioning a movie in a drop zone is different from selecting which part of a movie shows in a drop zone (which allows you to select which frame of the movie is displayed in a drop zone). For more information, see Related Topics below.

Resizing clips in drop zones with motion 5.04

Can someone please help me resize clips in the dropzones. When I drag the clip into the dropzone it show as too high up causing the head of my subject to be cut off as an example. I do not see anywhere that shows a "fit" option in the inspector or anywhere else. I purchase templates with dropzones in place. Also when I try to resiize the handles that are showing, the complete drop zones resizes.
Is there some parameters I am supposed to using with the clip itself?

The "Adjust Item" tool is contextual, and will only help you move the image around inside of a Drop Zone.
If you need to "resize" the content of a Drop Zone, use the Scale parameter in the Inspector's "Image" section.
I happen to be doing this at the moment myself.

Drop Zone Image Adjustment in iDVD '08

I use iDVD 6 for making slideshow DVDs of family functions to send out to my other family members. One of the features that I used in every one of my projects was the ability to drag around any image that you place in the Drop Zone that has been automatically cropped, so that you can pick which part of the image you want to be visible.
In iDVD '08, however, this feature has been removed. What's worse, some of the new themes (Modern, for instance) crop the majority of the images you place into the Drop Zone. I find virtually every new theme in iDVD '08 unusable because of the removal of this feature.
I tried using an old theme from iDVD 6, but I was also unable to adjust the location of my images in relation to the drop zone.
Am I just doing something wrong? In both the toturial vid and the manual, Apple makes no mention of adjusting an image once it's inside the Drop Zone.
In the meantime, I am reverting to iDVD 6. I don't understand why they would remove a feature that was so useful.

*Here's the whole explanation from iDVD Help:*
Repositioning an image or movie in a drop zone
When you drag a picture or movie into a drop zone, the aspect ratio of the image is preserved, but it is scaled larger or smaller to fill the drop zone. As a result, sometimes part of the image is cut off and does not appear in the drop zone. In this case, you can move the image to choose which portion is visible in the drop zone.
_To reposition an image or movie in a drop zone:_
1.) From the drop zone on the menu (not in the drop zone editor), click the image or movie and press Command.
2.) Drag the image until the part you want is visible in the drop zone.
Keep these things in mind as you position an image:
If you drag a narrow image to a drop zone, the image is scaled vertically, and you can move the image up or down only.
If you drag a wide image to a drop zone, the image is scaled horizontally, and you can move the image side to side only.
If you accidentally drag the image too far, you will remove it from the drop zone. (The cursor changes from a hand to a puff of smoke.) Choose Edit > Undo to restore the image to the drop zone.
Repositioning a movie in a drop zone is different from selecting which part of a movie shows in a drop zone (which allows you to select which frame of the movie is displayed in a drop zone). For more information, see Related Topics below.

Moving an image around in a drop zone in DVD studio

Hi there
I am pretty new to this DVD studio program, and I often am using templates to make my client DVDs. One major major problem I always come across is when I have to drop images in, they always dont fit properly, let me show you one for example
http://img522.imageshack.us/img522/8978/picture8vt.png
This always happens when I drop images in Final cut. Is there a way I can move my Image around that box?
Thanks in advance!
Message was edited by: blackout2008

if you click on a corner handle of the drop zone then press shift and drag the corner outwards, the drop zone will snap fit to match the format ratio of the image revealing the complete image
the reason you wont be able to move the image sideways is that there wont be any image to reveal-if the image is a different ratio to the drop zone, the image will fit inside the drop zone either by hieght or width
if the drope zones dont provide what you want-its very simple to create your own in a graphics application

How do I get pics into Drop Zones for Templates?

I am having a problem that is probably simple, but for the life of me, I can't figure it out. I opened a templated in Motion and noticed that some of the templates have drop zones, a la iDVD.
Okay, so I found some pics in the browser but when I went to drag them into the drop zone, the image did not go into into the drop zone, and instead a new layer was created. I've tried this countless times and can't seem to gt the pictures to go in the drop zones.
Am I doing anything wrong?

The problem is one of interpretation. What you are seeing are grey "replace media" items which need to be replaced with what you want. They aren't 'drop zones' ala IDVD or DVDSP (basically it's an image with a mask or overlay over it giving it that 'drop zone' look)
There are many ways of changing/replacing the "media" items (this is Apple after all ;):
1) If you press F5, you open up the "Layers/Media/Audio" window. Click "Media" and you'll see all the elements used to make up the template, including "replace 1.jpg" etc.
2)Click on one of the "replace" files. Then click the "Inspector" tab in the Browser window. Then you'll see a window that says "Linked Objects." and below that "replace media file." Click "Replace media File" and then choose the file you want to insert/replace (you'll have to de-select "Show Matching Names Only" to be able to replace it with your own file)
OR:
1) press F6 and open the Timeline window.
2) Scroll down and you will see a layer called "Replace"
3) Open up that layer (click the triangle) and you will see Replace 1, Replace 2, etc (depends on your template)
4) Drag the image you want to insert/replace into the template to the sublayer called "replace 1" etc.
There are other ways, but these two are the most 'stable' I have found.

Forever Theme Frames around drop zone pictures - can I remove them?

I'm using the forever theme. There are frames around drop zone photo's - not buttons. I've tried hitting the buttons bar with the drop zone highlighted and clicking the none button - but it stays with a white boarder around it. So - i looked in the theme contents - but I don't find anything that looks like a white frame... I checked out the plist file -and it looked all compiled - funny script and all - any way to eliminate these frames? I use a lot of transparent gifs for the purpose that I don't want a frame around them - so they just float over the background.

Does this help?
From the iDvd Help Menu:
Repositioning an image or movie in a drop zone
When you drag a picture or movie into a drop zone, the aspect ratio of the image is preserved, but it is scaled larger or smaller to fill the drop zone. As a result, sometimes part of the image is cut off and does not appear in the drop zone. In this case, you can move the image to choose which portion is visible in the drop zone.
To reposition an image or movie in a drop zone:
1.) From the drop zone on the menu (not in the drop zone editor), click the image or movie and press Command.
2.) Drag the image until the part you want is visible in the drop zone.
Keep these things in mind as you position an image:
If you drag a narrow image to a drop zone, the image is scaled vertically, and you can move the image up or down only.
If you drag a wide image to a drop zone, the image is scaled horizontally, and you can move the image side to side only.
If you accidentally drag the image too far, you will remove it from the drop zone. (The cursor changes from a hand to a puff of smoke.) Choose Edit > Undo to restore the image to the drop zone.
Repositioning a movie in a drop zone is different from selecting which part of a movie shows in a drop zone (which allows you to select which frame of the movie is displayed in a drop zone). For more information, see Related Topics below.

How do I resize an image within a drop zone (not the drop zone itself) in motion 5?

How do I resize an image within a drop zone (not the drop zone itself) in motion 5?

I think others would be able to help if you describe a little more why you'd like to do this. Given that drop zones are a way of passing images into Motion that you want to manipulate, resizing a drop zone is the equivalent of resizing the image.
If you're having a problem with an image from Final Cut being too big or too small, select the Drop Zone in the inspector and make sure the Fit parameter is set to 'Fit' - 'Center' will result in images dropped not being scaled to fit the Drop Zone. 'Stretch' will force the dropped image to fill the space defined by the drop zone,
If the image is already cropped and scaled up in Final Cut Pro, that is the information that Motion gets - you can't scale down the image to see more of the edges that have been cropped off.
If you want more than one copy of the image passed via the drop zone, use Make Clone Layer from the Object menu.

Images too large for Drop zone in Template

Is there a way I can resize images I want to use after I drop it in a drop zone? For some reason, all my images are too large for the drop zones - even after making smaller in photoshop.
Thanks!

I'm fairly new to DVD SP too and wondering the same thing.
Shouldn't we be able to edit the image mask?
It's kinda worthless to just accept what DVDSP decides to do with the photo.

How do you resize a photo in an iDVD drop zone?

The themes in iDVD are virtually useless if you can't easily drag a photo into a drop zone and move and resize as necessary. Using the method described in iDVD is ridiculously cumbersome but what's worse is that it doesn't work.
Does anyone have a suggestion for making this task easier? Does anyone know of better software that would replace iDVD?
This problem has been around for years. It's unbelievable that Apple allows the problem to continue.
Thanks for any help.

Thanks for the reply - I've just gotten around to playing with this some more and as you mentioned, I'm now creating a new image in Photoshop that repositions the image so that it places well in the iDVD template (soft frame in this case). Extra work, and it appears to be effective in the iDVD interface, but when I burned a test DVD the images were scaled differently in the final render to disk.
I'm not trying to do anything out of the ordinary here - just want to burn a DVD of my baby boy for the grandparents. This is precisely the type of use iLife is aimed at... But something as simple as putting a picture of my son on the DVD menu took the extra step of composing in Photoshop in order to have his head not cropped ridiculously. Now even that extra work is altered on the DVD.
I'm new to iDVD and might just need to work with it some more, but so far it just seems wrong and inconsistent with the rest of iLife to not have this flexibility.

Resize photo in Drop Zone

I have just completed my first non-PC DVD creation!!! I have run into a problem that I can't figure out, I have checked the discussion groups and I don;t believe anyone other than me has run into this: I grabbed some photos (3) from my iPhoto collection, dropped them into the "Drop Zone editor", and they are displayed on my menu, very nice, etc. However the photo is displayed so large that all you can see is my child's left eye and left forehead (for example). How can you re-adjust the photos that iDVD uses (either before pulling into iDVD or once in iDVD) so that that they are vaguely right size? I have tried left- and right-clicking eveywhere, no luck. I have tried taking one of the photos, amking a copy form iPhoto onto my desktop, resizing it down to 3 by 2 inches, adn then trying to use that "shrunk" photo - no change! Any ideas anyone..........

I used Photoshop to try different sizes until I could fit our logo just the way I wanted. The final image size that seems to work fine is 693w x 520h in pixels. Your image can be 693w but not all 520h will make it on. I had to position our logo which is roughly 260h about 1/3 of the way down from the top as the bottom part gets cut off. You need the extra white space on the bottom but not width wise.

Not scaling images in drop zone

Hi,
For some reason when I drop an image into a drop zone in iDVD 6, it will not scale the image so a large chunk of the image is cropped off. Since the image I need to use has some text on it, I'm trying t resize it to fit in an external editor, but no luck as of yet.
Any help would be greatly appreciated.
Many, many thanks,
David

David,
I know I used to have the problem you described back in the iDVD 4 (or earlier) days, but I just did some more checking.
The article Selecting the portion of a movie or image that appears in the drop zone at http://docs.info.apple.com/article.html?path=iDVD/5.0/en/258.html says (in part): When you drag a picture or movie into a drop zone, the aspect ratio of the image is preserved and it is scaled larger or smaller until the top, bottom, left, or right edge of the image meets the edge of the drop zone. You can move the image to choose which portion of the image is visible in the drop zone.
The article was written for iDVD 5 but when I 'fired up' iDVD 6 and tried some 5 megapixel images in the drop zones of several themes, everything worked as advertised in the article.
What theme are you having problems with?
F Shippey

Drop Zone Image Parameters

Does anybody know how to find out the image parameters for any given menu template drop zone?
I am finding that some jpgs I use are getting cut off and in only showing half of it. I read that in iDVD 08 the resizing option was removed so if I could get the height x length dimensions needed would at least be a help until apple fixes this.
Note I am on a Mac Pro with iLife 08
Message was edited by: weaponx88

Take a look at these links if you haven't already:
http://discussions.apple.com/thread.jspa?messageID=8082366&#8082366
http://discussions.apple.com/thread.jspa?messageID=7855744&#7855744

Resizing photos for drop zones

When I drop a photo into a drop zone in iDVD '08 it stays huge and only a small part of the photo can be seen. I have resized to 768x576 as the HELP suggested but it made no difference. No matter how small I made the photo, it got blown up to a large size. I know you can move the photo a little using the command button and the mouse, but unfortunately that doesn't help much when the image is so big.
Any ideas? I'm just about ready to pull the last couple of hairs out of my head! This has never been a problem in iDVD '06
Many thanks

Changing the dpi won't help - iDVD and iMovie don't care about it. The theme displays the entire image from top to bottom (more or less), but since the window is portrait mode on a landscape image, you loose about 1/4 of the image on each side. There doesn't seem to be much you can do with it (other than not use it).
What I would do is create a 640 x480 image with a 120 pixel wide black band on either side and insert a 400 pixel wide by 480 pixel high image in the middle between the black bands. The theme should show you just about all of the image you have inserted when you place the 640x480 image in the drop zone window. I wish there were an easier way, but I've had to use such trial and error methods since I started working with iDVD back in iDVD 2 days.
F Shippey

Drop-Zones Resizing Images

Similar Messages

Maybe you are looking for