Dtp error when loading data from one cube to another cube?
hi,experts
it seems strange that when I tick the some characteristics as navigational attributes in the cube , the error occurs during the execution of the DTP:error while updating to target Z* (Cube name ).
once i turn the flag off , no error appear. could anyone give me a clue ?
thanks in advance!
Hi,
When u make changes in the cube u need to make necessary changes in Transformation and activate the DTP.The checking of Navigational attributes in cube will appear in u r transformation as new fields where u need to create a mapping for them and then activate, also activate your DTP and then load the data. This should resolve your issue.
Regards
Similar Messages
-
Load data from one Application to another in BPC NW 7.5
Hi
I have a requirement to load data from One application to another application.
eg. HR Plannning to CostCenter Planning.
I am aware of a method to load data using transformation file mapping source and target dimensions and run DM package and this works fine.
However, the challenge is if i try to automate this process then i will have to hardcode the application tech name and save as variant to use that in process chain. Now, if i hardcode the tech name of the application then it might happen that during full optimization the tech name might change and the automation load will fail.
so how to handle this situation? any standard practices available?
appreciate your inputs/thoughts.
Regards.Hi,
Exactly. The main problem is that there is no statement to transfer the data. Please take a look at the below link from help.sap:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/f4/33f0bbc46c4a53860f1410f20ffb8b/content.htm
Since the structure of both the applications is same, you dont require add_dim or rename_dim, etc. However, you definitely need the when statement.
If you want to transfer all the records, then you can have something like
*WHEN ACCOUNT
*IS *
*REC(EXPRESSION = %VALUE%)
*ENDWHEN
Hope this helps. -
How load data from One Infoobject to Another Infoobject?
Hi GuRUS
Any body has succeded in loading data from One Infoobject to Another Infoobject?
Pls Let me kNow
Regards
DuraiHi Durai,
Create export datasource on the info-object and then load the data to the other info-object.
Check this link also:
Re: How load data from Infoobject to another Infoobject?
Bye
Dinesh -
Error when loading data from DSO to Cube
Hi,
After upgrading to 2004s we get the following error message when trying to load data from a DSO to a Cube:
Unexpected error: RSDRC_CONVERT_RANGES_TO_SELDR
Has anyone experienced a similar problem or have some guidelines on how to resolve it?
Kind regards,
FredrikHej Martin,
Tack!
Problem solved
//Fredrik -
Error while loading data from one ODS to anther ODS
Hi all,
while loading the data from one ODS to another ODS, we are getting error message - Error: No match found in target. No Space on ODS.
I have done a runstat on these tables of the ODS.. but the issue repeated.
Can anyone tell how do we solve this issue.Check if you get any other Dump message in ST22 to see if it is due to some space availability in the DSO or underlying tables.
Or Post in detail if any other errore message is available. -
Problem in loading data from one DSO to another
Hi All,
I am using Multicube 0PM_MP03, this mutli cube use DSO 0PM_DS02 & 0PM_DS01, data will flow from PSA to 0PM_DS01 & then to 0PM_DS02 using a Update rule, i have triggered my infopackage & i can see data in 0PM_DS01 & i have activated the data in 0PM_DS01, now on right click on 0PM_DS01 i click on the option Additional Functions -> Update 3.x Data to Target, now the request status is green in 0PM_DS02 but i cannot see any data in this DSO, neither in new or active, can anyone help me out in this where i am doing wrong.
Thanks,
Pritam.Hi Pritam,
This is strange, Check the below points.
1. If the number of records added 0, in manage of DSO2?
2. Confirm if there is a transfprmation between ODS1 & ODS2. If there is, you need to use a DTP (not Additional Functions -> Update 3.x Data to Target).
3. Activate the request and then check.
4. Maintain PSA for the datasource 80PM_DS01 and when loading data from DSO1 to DSO2 choose option PSA and then into targets.
Regards,
Panksj. -
How to load data from one Infocube to another request by request using DTP
Hi All,
I have a scenario where we are maintaining backup Infocube B for Infocube A. User loads data from a flat file many times a day in different requests. We need to maintain backup of the Infocube A on weekly basis. i.e data to be refreshed with delta update from cube A to cube B. There are some situations where user deletes some of the requests in Infocube A randomly after use. Will this change effect in back up cube B when performed data refresh from cube A to cube B. i.e. this functionality is similar to reconstruct in BW 3.5. Now we are running on BI 7.0 SP 9.
Can anyone answer this ASAP.
Many Thanks,
RaviYou cannot load request by request, " Get Data By Request " DTP loads request by request on " First In First Out " basis. You can run some Pseudo/Fake DTP's if you dont want to load data from a particular request.
If the user deletes a request from Cube A, it wont be loaded to Cube B but if it is already loaded in Cube B and later the user deletes the request from Cube A you have to delete the request frm Cube B. Inorder to monitor request by request run DTP with " Get Data By Request set. -
Error while loading data from write optimized ODS to cube
Hi All,
I am loading data from a write optimized ODS to cube
I have done Generate Export Datasource
schedulled the info packge with 1 selection for full load
then it gave me following error in Transfer IDOCs & TRFC
Info IDOC 1: IDOC with errors added
Info IDOC 2: IDOC with errors added
Info IDOC 3: IDOC with errors added
Info IDOC 4: IDOC with errors added
Data packege 1 arrived in BW Processing : selected number does not agree with transferred number
Processing below is green
shows update of 4 new records to Datapackage 1.
Please provide inputs for the resolution
Thanks & Regards,
Rashmi.please let me know, What more details you need?
If I click F1 for error details i get following message
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
Thanks & Regards,
Rashmi. -
ODI Error when Loading data from a .csv file to Planning
Hello,
I am trying to load data from a csv file to planning using ODI 10.1.3.6 and I am facing this particular error. I am using staging area as Sunopsis memory engine.
7000 : null : java.sql.SQLException: Invalid COL ALIAS "DEFAULT C12_ALIAS__DEFAULT" for column "ALIAS:"
java.sql.SQLException: Invalid COL ALIAS "DEFAULT C12_ALIAS__DEFAULT" for column "ALIAS:"
at com.sunopsis.jdbc.driver.file.bb.b(bb.java)
at com.sunopsis.jdbc.driver.file.bb.a(bb.java)
at com.sunopsis.jdbc.driver.file.w.b(w.java)
at com.sunopsis.jdbc.driver.file.w.executeQuery(w.java)
at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.k(e.java)
at com.sunopsis.dwg.cmd.g.A(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Code from Operator:
select Account C1_ACCOUNT,
Parent C2_PARENT,
Alias: Default C12_ALIAS__DEFAULT,
Data Storage C3_DATA_STORAGE,
Two Pass Calculation C9_TWO_PASS_CALCULATION,
Account Type C6_ACCOUNT_TYPE,
Time Balance C14_TIME_BALANCE,
Data Type C5_DATA_TYPE,
Variance Reporting C10_VARIANCE_REPORTING,
Source Plan Type C13_SOURCE_PLAN_TYPE,
Plan Type (FinStmt) C7_PLAN_TYPE__FINSTMT_,
Aggregation (FinStmt) C8_AGGREGATION__FINSTMT_,
Plan Type (WFP) C15_PLAN_TYPE__WFP_,
Aggregation (WFP) C4_AGGREGATION__WFP_,
Formula C11_FORMULA
from TABLE
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=Account.csvSNP$CRLOAD_FILE=Y:/1 Metadata/Account//Account.csvSNP$CRFILE_FORMAT=DSNP$CRFILE_SEP_FIELD=2CSNP$CRFILE_SEP_LINE=0D0ASNP$CRFILE_FIRST_ROW=1SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=AccountSNP$CRTYPE_NAME=STRINGSNP$CRORDER=1SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=ParentSNP$CRTYPE_NAME=STRINGSNP$CRORDER=2SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Alias: DefaultSNP$CRTYPE_NAME=STRINGSNP$CRORDER=3SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Data StorageSNP$CRTYPE_NAME=STRINGSNP$CRORDER=4SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Two Pass CalculationSNP$CRTYPE_NAME=STRINGSNP$CRORDER=5SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Account TypeSNP$CRTYPE_NAME=STRINGSNP$CRORDER=6SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Time BalanceSNP$CRTYPE_NAME=STRINGSNP$CRORDER=7SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Data TypeSNP$CRTYPE_NAME=STRINGSNP$CRORDER=8SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Variance ReportingSNP$CRTYPE_NAME=STRINGSNP$CRORDER=9SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Source Plan TypeSNP$CRTYPE_NAME=STRINGSNP$CRORDER=10SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Plan Type (FinStmt)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=11SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Aggregation (FinStmt)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=12SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Plan Type (WFP)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=13SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Aggregation (WFP)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=14SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=FormulaSNP$CRTYPE_NAME=STRINGSNP$CRORDER=15SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CR$$SNPS_END_KEY*/
insert into "C$_0Account"
C1_ACCOUNT,
C2_PARENT,
C12_ALIAS__DEFAULT,
C3_DATA_STORAGE,
C9_TWO_PASS_CALCULATION,
C6_ACCOUNT_TYPE,
C14_TIME_BALANCE,
C5_DATA_TYPE,
C10_VARIANCE_REPORTING,
C13_SOURCE_PLAN_TYPE,
C7_PLAN_TYPE__FINSTMT_,
C8_AGGREGATION__FINSTMT_,
C15_PLAN_TYPE__WFP_,
C4_AGGREGATION__WFP_,
C11_FORMULA
values
:C1_ACCOUNT,
:C2_PARENT,
:C12_ALIAS__DEFAULT,
:C3_DATA_STORAGE,
:C9_TWO_PASS_CALCULATION,
:C6_ACCOUNT_TYPE,
:C14_TIME_BALANCE,
:C5_DATA_TYPE,
:C10_VARIANCE_REPORTING,
:C13_SOURCE_PLAN_TYPE,
:C7_PLAN_TYPE__FINSTMT_,
:C8_AGGREGATION__FINSTMT_,
:C15_PLAN_TYPE__WFP_,
:C4_AGGREGATION__WFP_,
:C11_FORMULA
Thanks in advance!Right-clicking "data" on the model tab can you see the data?
In your code there's written:
P$CRLOAD_FILE=Y:/1 Metadata/Account//Account.csv
Is it right the double slash before the file name? -
Data load failed while loading data from one DSO to another DSO..
Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
SnehaHi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR -
Loading data from one table to another using cursor
Hi,
I have given the below command to load the data from 1 table to another using cursor.
declare
cursor mycursor IS
SELECT extract_name,from_date,to_date,BETA from temp_table where EXTRACT_NAME='GIFTCARD_DETAILS';
Begin
for mycursor_1 IN mycursor loop
insert into tmp_tab columns(col1,col2,col3,col5) values(mycursor_1.EXTRACT_NAME,mycursor_1.from_date,mycursor_1.to_date,mycursor_1.BETA);
End loop;
commit;
end;
It is working fine.
But I want to hard code some of the columns ( like flags ) which are not there in 1st table and load them into 2nd table.
In db2 we will give commands like
varSqlStatus=`db2 "declare mycurs cursor for select extract_name,from_date,to_date,BETA,'N','Y' from temp_table"`
varSqlStatus=`db2 "load from mycurs of cursor modified by identityignore insert into tmp_tab(col1,col2,col3,col5,col6,col7) nonrecoverable"`
But I want it in oracle 10g, Can any one help me in this.Have you tried either of the two options :
1. Modify the CURSOR itself :
cursor mycursor IS
SELECT extract_name,from_date,to_date,BETA,'N','Y' from temp_table where EXTRACT_NAME='GIFTCARD_DETAILS';2. Modify the INSERT statement itself :
insert into tmp_tab columns(col1,col2,col3,col5,col6,col7) values(mycursor_1.EXTRACT_NAME,mycursor_1.from_date,mycursor_1.to_date,mycursor_1.BETA,'N','Y'); -
Fatal error while transferring data from one bb to another
I was trying to transfer data from one bb to a different bb using the bb desktop manager tool. It collected all the data from the first bb fine and then while transferring data to the new one it said a fatal error occured to try again. That bb will not even turn on now. No white screen or anything. Its like there is no operating system. I don't know what to do. I tried to connect it and just update the software but that isnt working either. Says it is not responding during initialization! I think I killed it.... any ideas what to do???
You can try to reload the OS in one of the following ways
http://www.blackberry.com/btsc/KB03485
http://blackberryfaq.net/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution. -
Error when cloning db from one machine to another
Hi people.
I am trying to clone a database from one machine to another. (both are linux x86_64 machines with 11g installed on both)
I obtained the following error after a few minutes into the process. Any workarounds for this?
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03004: fatal error during execution of command
RMAN-10041: Could not re-create polling channel context following failure.
RMAN-10024: error setting up for rpc polling
RMAN-10005: error opening cursor
RMAN-10002: ORACLE error: ORA-03114: not connected to ORACLE
RMAN-03002: failure of Duplicate Db command at 11/26/2013 23:05:42
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Process ID: 9054
Session ID: 91 Serial number: 5Likely the RDBMS Software version and/or Patchset level is not the same on the two servers.
Hemant K Chitale -
Error when loading data from xml file
Hi,
I'm trying to load data into a table from XML file using ApEx DATA UNLOAD/LOAD interfaces .
ApEx version is 3.0.1 .
I'm getting this error:
ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00222: error received from SAX callback function
How to find cause of the error ?
JanusTkank you for the simple but good advice :)
unfortunately even google didn't find many answers :
LPX-00222 + APEX ... NOTHING
LPX-00222 + ORA- ... 2 pages of something like
"Examine the additional error messages and take corrective action" -
Error when copying items from one table to another
I am trying to copy data from 2 archive tables within an
Access database to their twin production tables. The first table
copies perfectly with the code:
<CFQUERY NAME="moveArchAttach" datasource="faaco2">
INSERT INTO tbl_Attachment ( PostID, Attachment, AttachNote,
AttachName )
SELECT tbl_Attachment_Archived.PostID,
tbl_Attachment_Archived.Attachment,
tbl_Attachment_Archived.AttachNote,
tbl_Attachment_Archived.AttachName
FROM tbl_Attachment_Archived
</CFQUERY>
However, when trying to use similar code on the other table:
<CFQUERY NAME="moveArchPost" datasource="faaco2">
INSERT INTO tbl_Posting ( Title, FirstName, LastName,
PhoneNumber, RoutingSymbol, Email, IniDate, ComDate, SOLNBR,
PhaseCode, ProcCode, Posting, Password, RegionCode )
SELECT tbl_Posting_Archived.Title,
tbl_Posting_Archived.FirstName, tbl_Posting_Archived.LastName,
tbl_Posting_Archived.PhoneNumber,
tbl_Posting_Archived.RoutingSymbol, tbl_Posting.Email,
tbl_Posting.IniDate, tbl_Posting.ComDate, tbl_Posting.SOLNBR,
tbl_Posting.PhaseCode, tbl_Posting.ProcCode, tbl_Posting.Posting,
tbl_Posting.Password, tbl_Posting.RegionCode
FROM tbl_Posting_Archived
</CFQUERY>
I receive the error:
[Microsoft][ODBC Microsoft Access Driver] Too few parameters.
Expected 9.
Any help would be greatly appreciated, I am at a loss and
I've tried everything. Thank you.I realized my error immediately after posting this topic and
subsequently have resolved this error. On 9 of the values, I have
listed the wrong table in the SELECT statement. This is why one
needs to take breaks instead of staring at a screen forever :).
Thank you anyway!
Maybe you are looking for
-
Interest calculation on overdue,credit balance & cash dicount
Hi gurus we need to calculate the over due interest, interest on credit balance & cash discount on the customer balance thru system. What are the configuration settings required& also for reporting purpose what we need to do.Please explain in details
-
Hi, Great work on Yosemite, great new design as well. Several problems since the Yosemite upgrade though : - When playing high pitch noise (watching the keynote for example), the speakers make the case around it vibrate. This was not happening un
-
Macbook Pro 13- Back to school offer 2011?
I have been holding out on purchasing the Macbook Pro 13 2011 model for while now due to New OS Back to school offer? Wondering if anyone would know if Apple are doing the back to school offer this year as sure last years was around May but nothing h
-
Message board that can be edited by the posted person - Is it possible?
Hello, We have a very old application at the portal which uses as a message board of the organization: People can advertise messages over there by categories, for example if they would like to rent an apartment, to sell sonmething ect. Of course each
-
Change sender email for submitted Form emails
I built a website for a client using Muse and the Form widget through Business Catalyst. However, now whenever the client gets emails from a submitted form, it says its coming from MY email. How do I change the sender so that they recognize that it's