DTP not getting displayed in Transported Objects in Quality System
We are Tranporting all the CRM Master Data but no DTP AND IP are getting displayed in Quality system is there any setting to make to transport these or get it displayed.
Please help
Thanks
Soniya
I dont understand the question. Can you pl explain what do you want to do?
Ravi Thothadri
Similar Messages
-
Master data is not getting displayed in the Report in Quality
HI Experts,
I have ZESP_Num as master for my transaction data.
I have loaded the data in the Development and designed and checked my report. It is working fine.
But after moving it to Quality. My report is not getting the master data.
When I try to do right click manage ZESP_Num.
I'm getting message like this.
The data from the InfoProvider ZESP_NUM involved could not be checked
Message no. DBMAN242
Diagnosis
A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
Can anyone plz help me.
ThanksHi,
Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
Hope helpful.
Regards,
RAO -
Object form is not getting displayed for few users
Guys
I have successfully implemented approval and provisining flows for a new resource in OIM 9.1.X. This resource has an object and a process form.
It is working fine in production for few users. But for few users, the object form is not getting displayed to give the input while requesting this resource.
Please let me know what might be the issue.Hi,
Could you please check whether you have added ALL_USERS group as a resource administrator group in resource object definition?
Add AL_USERS group as a resource administrators with the read access.
We had similar issue and managed to resolved.
Thanks,
Pallavi Chaudhari -
Total is not getting displayed in the ALV output.
Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
IT_eventS TYPE slis_t_event,
fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
belnr TYPE dberchz-belnr,
belzart TYPE dberchz-belzart,
net TYPE dberchz-nettobtr,
END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = 'YZ_PLR'
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* IT_EXCLUDING =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = layout
it_fieldcat = fcat[]
i_tabname = 'LT_TAB'
it_events = IT_EVENTS[]
* IT_SORT =
* I_TEXT = ' '
tables
t_outtab = lt_tab[]
* EXCEPTIONS
* PROGRAM_ERROR = 1
* MAXIMUM_OF_APPENDS_REACHED = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
GauravHi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
BELNR LIKE BSEG-BELNR,
GJAHR LIKE BSEG-GJAHR,
WRBTR LIKE BSEG-WRBTR,
WAERS LIKE BKPF-WAERS,
END OF LT_TAB.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV,
IT_EVENTS TYPE SLIS_T_EVENT,
FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
REC_FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS = 1.
FCAT-FIELDNAME = 'BELNR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS = 2.
FCAT-FIELDNAME = 'GJAHR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS = 3.
FCAT-FIELDNAME = 'WRBTR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-CFIELDNAME = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME = 'BSEG'.
FCAT-DO_SUM = 'X'.
APPEND FCAT.
FCAT-COL_POS = 4.
FCAT-FIELDNAME = 'WAERS'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME = 'BKPF'.
FCAT-DO_SUM = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
WHERE BUKRS = 'MAAB'
AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT[]
I_TABNAME = 'LT_TAB'
IT_EVENTS = IT_EVENTS[]
TABLES
T_OUTTAB = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max -
Data is not getting displayed in the report from an Infoset.
Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.RaoHi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao. -
Default Value is not getting displayed in SUN ONE Ldap
Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil KumarHi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi -
A keyfigure is not getting displayed in the DSO and query
hi friends,
i have newly developed a DSO with 11 keyfigures and with some 10 characteristics. i created DTP , transformations etc., and i loaded data into it and activated it succesfully.
now when i select display data of this DSO one of my keygure is not getting displayed.
even tht same keyfigure is not appearing in the query too.
but when i check the active table of this dso in SE11 , tht keyfigure is displayed with values.
could anyone help through this issue.Hi
Even I faced such an issue earlier. I could resolve it simply by readjusting the DSO i.e. to delete the keyfigure and add it in the structure once again, before this you have to delete the data in the DSO. Also, if you have a multiprovider on the DSO make sure that the keyfigure concerned is identified.
Let us know if this works for you. Thanks. -
Session Timeout Alert text is not getting displayed on web ui.
Hello,
In "Session Timeout Alert" pop up we are facing one issue. The pop up is getting displayed as per the value in rdisp/plugin_auto_logout parameter i.e. 1800. But the text is not getting displayed.
I have implemented the SAP Note 1877120 also. Any inputs to resolve this issue.
Thanks.Hi Sigrid,
When we do pre activities related to OTR, need to save it in standard name space only ? could you guide me pls.
in the below we have Alias and package are standard.
1.) There are 4 texts which needs to be configured via SOTR_EDIT to get the translation according your languages implemented in your CRM.
a.) Start doing it by opening transaction SOTR_EDIT.
b.) Change to the language you would like to use.
c.) As ALIAS enter first CRM_IC_CMP_FRAME/SESSION_PING_TITLE. Click on Create and confirm the following dialogues.
d.) Enter CRM_IC_CMP_FRAME as package and the object type as WAPP.
e.) Finally enter the translation according your language from the english version (length of text: 25):
"Session Timeout Alert !"
f.) Save you changes
Repeat the steps a.) to f.) with the following aliases and options:
Jimmi -
Profit center text not getting displayed in report
Hi all
Iam using 0profit_ctr in my query.But in report the text associated with it is not getting displayed.When i see the masterdata the text is displayed properly.
Please let me know how to rectify this.
Thanks
BhanuRight click on the master object, and click "Activate Master Data"
Hope this will resolve the issue.
Ishdeep. -
Values are not getting displayed in screen
Hi Experts,
I have used BAPI_CHARACT_CREATE to upload characteristics(t-code: ct04),
All data are uploaded into the Master Table, while changing the same in t-code ct04 the Value and Description is not getting displayed in screen( in Table control).
NOTE: If i use BAPI_CHARACT_GETDETAIL to get the details of a character i am getting all the values which i have uploaded. (But not in the t-code ct04).
BDC and LSMW is not working for this t-code.
Please help me out.
Thanks and Regards,
LOGUHi,
i think you have not released the objects to repository. test and try again..
thanks
karthik -
SAP Fields not getting displayed on the BDT screen
Hello Gurus,
I am trying to add 2 custom fields on to the claims management screen. The following steps were followed to add 2 fields on to the claims Management subclaim screen.
1. Create a field group Zxxxxx1 with the two fields attached to it as input enabled.
2. Create a View Zxxxxx2 attach the created field group Zxxxxx1, then create a subscreen screen add two fields to the screen and make them as input enabled. Then attached the subscreen to the View.
3. Create a PBO and PAI function modules for the screen and attach it to the View Zxxxxx2.
4. Create a section Zxxxxx3 and attach the view Zxxxxx2 to the section.
5. Attach the section to the Subclaim Overview Screen.
6. Inspite of doing all the above steps the screen is not getting displayed or the Function module PAI / PBO / FMOD is not being called.
Since I am attaching the section to a standard screen sequence I am not doing any modification to the screen sequence and screen sequence catagory.
Kindly let me know the steps I am missing in the configration of 2 new fields via BDT.
Reagrds,
ShivaHi Shiva,
did you create your own Z BDT application? Is it set to be active?
I have no access to any claims management system: Does the claim object support divisibility? If so, have you assigned the correct data set in your view?
Also, if you have your own Z BDT application and the claim object does support divisibility, did you assign the Z application to the divisibility view?
Regards,
Frank
Message was edited by: Frank Vieregge -
Condition tab in STO is not getting displayed
Hi,
While creating STO, the Condition tab in Line Item is not getting displayed.
Why it is not getting displayed? Where do I need to change the configuration?
Do I need to maintain any Pricing Procedure in MM?
Please guide.
Regards,
PKHi,
Check whether you have maintained Schema determination for respective document type and STO.
below mentioned is the navigation path to maintain the same.
> spro - materials management - purchasing - conditions - define price determination process - define schema determination - Determine Schema for Stock Transport Orders
Here maintain the Purchasing Schema group , Document type & pricing procedure for STO.
Standard Pricing procedure for STO is RM2000.
Hope this is helpful..
Regards,
Vamshi -
Form not getting displayed in sap b one
I have created a form using screen painter.But it is not getting displayed in sap b one.When I debugged the form it doesnot show any error.
Option Strict Off
Option Explicit On
Friend Class frmEmployee
Private WithEvents SBO_Application As SAPbouiCOM.Application
Private objForm As SAPbouiCOM.Form
Public Sub New()
MyBase.New()
'// set SBO_Application with an initialized application object
SetApplication()
LoadFromXML("frmEmployee.xml")
'LoadFromXML("MySimpleFormxml")
'// Get the added form object by using the form's UID
objForm = SBO_Application.Forms.Item("F_4")
'// Show the loaded Form
objForm.Visible = True
'// Saving the Form as an XML file
'// although it already exist as an XML file
'// it is good for practice
'SaveAsXML(objForm)
End Sub
Private Sub SetApplication()
'// Use an SboGuiApi object to establish connection
'// with the SAP Business One application and return an
'// initialized appliction object
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
SboGuiApi = New SAPbouiCOM.SboGuiApi
'// by following the steps specified above, the following
'// statment should be suficient for either development or run mode
sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
'// connect to a running SBO Application
SboGuiApi.Connect(sConnectionString)
'// get an initialized application object
SBO_Application = SboGuiApi.GetApplication()
End Sub
Private Sub LoadFromXML(ByRef FileName As String)
Dim oXmlDoc As Xml.XmlDocument
oXmlDoc = New Xml.XmlDocument
'// load the content of the XML File
Dim sPath As String
'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
sPath = "D:\Final\Forms"
oXmlDoc.Load(sPath & "\" & FileName)
'// load the form to the SBO application in one batch
SBO_Application.LoadBatchActions(oXmlDoc.InnerXml)
End Sub
Private Sub SaveAsXML(ByRef Form As SAPbouiCOM.Form)
Dim oXmlDoc As Xml.XmlDocument
Dim sXmlString As String
oXmlDoc = New Xml.XmlDocument
'// get the form as an XML string
sXmlString = Form.GetAsXML
'// load the form's XML string to the
'// XML document object
oXmlDoc.LoadXml(sXmlString)
Dim sPath As String
'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
sPath = "D:\Final\Forms"
'// save the XML Document
oXmlDoc.Save((sPath & "\frmEmployee1.xml"))
End Sub
End Class -
QS41_Code are not getting displayed
Dear Experts,
Scenario is,
1. T-Code QS41
2. Under code groups (of any catalogue) certain codes have been created.
3. The same entries can be viewed through tables QPCT and QPCD.
4. Unfortunately we could not see the codes in transaction code QS41, QS42 and QS43.
5. We checked for authorization related object. But in spite of full authorization codes are not getting displayed.
6. The message that we got is No entries found that match selection criteria Message no. SV004
Few more inputs,
u2022 Recently patch SPKE500053 for HCM module has been updated in system. Earlier level was SPKE500043.
u2022 Patch SAPKB64021 was updated for BASIS / BW/ ABAP. Earlier level was SAPKB64020.
We are worried that because of these patch upload are we facing this issue? Or else kindly let us know if another solution can be applied
Best Regards,
Anand RaoHello Anand
I think that is the sap note to be implemented. i had also come across same issue but do not remember the OSS note number
please look into the below link also for reference
Link: [http://www.sapfans.com/forums/viewtopic.php?f=7&t=316640]
Regards
Gajesh -
Barcodes are not getting Displayed in Smartforms.
HI
In Previous Month barcode was getting displayed in smartforms print Preview. And PDF form is generated successfully. I am not using standard form this is custom.
In Previous month, Service pack SAPKA70023 ABA Support Package 23 & 22 for 7.00 were applied, After that Barcode is not getting displayed for current month. I identified that Barcode Name is not mentioned in smartstyles.
Ther is no transport Request Moved from last one year.
Can any one suggest me there will be any impact on barcodes after service packs
Thanks
RaviHello,
have created some new users and done with the leave request, it comes to backend inbox, but not
visible in portal. Re-configured UWL, but still the task not coming( leave request). For other users it is > coming?
Where have you created these users? Many times it is not enough to create new users in a backend system. You will have to create them in the data source which is used by the UME of your portal or to map this data source with the system where you have created your new users
You can see what data source your portal is using by going to
Portal --> System Administration --> System Configuration --> UME Configuration --> Data Source
If this Data Source doesn´t contain your new users, then UWL wouldn´t be able to show their items.
Here you can check if your user is contained in the data source:
Portal --> User Administration --> choose the right data source --> put in the username --> search
Please check if your users are correctly created.
Regards,
Iris
Maybe you are looking for
-
Problem with mail with pictures.
Hi, I got my iPhone last Thursday so there is still a lot for me to learn. However, I thought we could receive pictures in our emails on the iPhone. Am I wrong? My son's girlfriend sent me 2 pictures in an email and I thought I could view and downloa
-
[iPhone SDK] UIScrollView to look like in Safari
UIScrollView seems to be setup to page through views that have pages the same size of the UIScrollView. But in Safari, the pages are about a half the size of the screen width. With a quarter of the screen margins on the left and right. This allows it
-
Typing and Scrolling lags sooooooo much on U310
For some reason, when I'm typing in microsoft word (I'm using 2010 version) or facebook, the typing lags sooooo much. The letters wouldn't appear on the screen until a 2 or 3 seconds after I typed them. It's really annoying since I have to write 10 p
-
In which situation is the JDBC ODBC bridge or Type-1 driver most suitable?
-
i'm signed in my creative cloud and tried to download acrobat pro, but received an error message (not indicating any error number)