Dual booting to Linux Ubuntu (and other distros)

Has anyone got some instructions on how to create a dual boot environment on the GT72 Dominator Pro.
I have attempted it, but it failed to read the linux usb EVERY.TIME.
Thanks!

There are plenty of websites showing you how to do the installation.
http://www.instructables.com/id/How-to-Dual-boot-Linux-and-Windows-on-a-PC-with-W/
Try to google around and note that you'll also have to search for the drivers since MSI notebooks doesn't support linux system.

Similar Messages

Dual boot kali linux with windows 8

i have ideapad y510p and i want to dual boot kali linux with windows 8
i want a full guide to do it please !!help!!!

Hello,
if you got problems with the kernel, you can try backbox-linux. The kernel there is newer. It is based on Ubuntu 12.04 LTS.
Have a nice day
thoschi
LENOVO IDEAPAD Z710 59403383,i7-4700MQ,8 GB DDR3-RAM,1.920 x 1.080 Pixel,NVIDIA® GeForce® GT 740M,Hybrid (1 TB S-ATA + 8GB SSD)

Dual boot Mac OS X and Arch: Arch installer cannot find CD drive?

Hi, everyone! A friend convinced me to install Arch about a month ago on my desktop and I've loved it so much that I want to dual boot Mac OS X and Arch on my Macbook Pro 7.1.
So I have a Macbook Pro 7.1. I have partitioned the drive in Mac OS X and installed rEFIt. I have the Arch x86_64 disk which I know works because I installed Arch on another computer.
When I boot from CD I get the familiar Arch screen with options "Boot Arch Linux, existing OS... etc." I click boot Arch, and it starts to load. However, it says "Waiting 30 seconds for device /dev/disk/by-label/ARCH_201005 ... ERROR: boot device didn't show up after 30 seconds... Falling back to interactive prompt. /bin/sh: can't access tty; job control turned off."
After searching around the forums, some people said they had similar problems attempting to install via USB. I used "cat /proc/scsi/scsi" and my CD drive does not show up in ramfs.. What can I do to install this amazing OS on my MB Pro 7.1?
Thank you for your time!

Solved! sledgehammer and MrE (sorry, I can't spell it) in IRC helped me out. I had to download a newer iso that offers better Mac hardware support. 2010-12 iso

T400s Linux/Windows dual boot with Linux from Esata Flash Drive

This project is about a dual boot Windows/Linux system without using the normal dual boot changes in the bootloader of the windows hard drive. When I started this I found bits and pieces of information on the web but no complete description so I wrote this post.
I have done a dual boot system on my previous Thinkpad where I had partitioned the hard drive between Linux and windows. For this project I wanted to leave the windows hard drive absolutely intact and unaltered, and boot Linux from a flash drive in the esata port on the back of the T400s. Obviously this uses the F12 boot list function key to boot from the flash. The advantage of this is that Windows is totally unaltered and when I need Linux, I plug in the esata flash drive, hit F12 during the boot cycle and select booting from the esata flash drive. The reason for Esata rather than USB is simply speed. I have a nice fast Linux installation.
I used the OCZ esata flash drive but suspect any of the alternatives will work. It did not need the accessory usb cable because the Thinkpad powered the esata flash directly.
To boot from the esata drive I had to make the following changes in the bios
    I left the esata flash plugged in as I went into the bios
    Bios>config>Serial ATA and changed the Sata controller mode option to compatibility
    Restart and back into the Bios
    Bios>startup>boot - in my case the esata flash drive showed up as ATA HDD2 and was excluded from the boot order so I had to un-exclude it and move it to the point in the boot order that I wanted.
Next I downloaded a linux installation iso and put it on a CD - in my case opensuse. Then booted from the CD
From now on this instructions are specific to opensuse and yast but can be generalized to whatever Linux is being used.
In my case yast came up with a good set of suggestions for automatically partitioning the flash drive but then crashed during the partitioning itself. So I rebooted and specified the partitions manually.
    A fat32 partition left as a partition which both windows and Linux could see (in my case about 20% of the drive) (/dev/sdb1)
    An extended partition with the remainder of the drive (/dev/sdb2) which contains the following logical partitions
    A linux Swap partition of 2GB (/dev/sdb5)
    A linux /home partition –the remainder of the drive (/dev/sdb6)
    A linux /root partition of 8GB (/dev/sdb7)
Yast automatically suggested mount points of C,D,E for the windows partitions. Unfortunately because of the way the Thinkpad hard drive was laid out Yast had C assigned the ThinkPad Service partition and D assigned to the SW_Preload (or main windows partition). However there was an edit function that allows for the reversal of those mount points so that the windows C drive is mounted in Linux as Windows/C thereby avoiding confusion. I had already backed up and removed the Thinkpad factory install data so I did not have to deal with that. Yast suggested Windows/E for the mount point of the FAT32 partition on the flash drive, which I accepted.
The yast install configurator made all this manual selection easy, and after the manual configuration the partitioning worked perfectly.
Next step was Linux user configuration which went fine
Next was booting.
In the section management tab
    delete the windows 1 and 2 options (since we are not dual booting directly)
In the boot loader installation tab
    uncheck boot from mbr ( this stops the install from installing Grub and dual boot on the windows c drive
    check boot from root partition (this installs grub and all associated files in the Linux root partition (/dev/sdb6)
I believe that the correct procedure at this point is to click Boot Loader installation details which will bring up the Grub device map. In the device map there will be a line for the fixed hard drive (aka the windows drive) and a line for the esata flash drive. When the installer started up these were in hard drive and esata drive order. However when we boot directly from the flash the esata drive will be grub drive hd0 and the fixed hard drive will be grub hd1. The device map order needs to be changed to reflect this ie the esata drive should be first not second.
I did not do this and ended up initially doing Grub command line editing to boot and later manually editing the grub files using information I had previously learned the hard way and through google.
At this point let the installer go ahead and install Linux. After doing this it should come back and tell you to reboot. Do not do it yet because we need to install the MBR into the flash drive.
I suspect that there is a way of doing this in Yast running from the Live CD but it was not obvious to me so I used the manual method that I have used before.
Open a root terminal
Mount /dev/sdb6 to /mnt/sdb6 (my linux root)
Touch /mnt/sdb6/boot/grub/flag
The purpose of this is when we go looking later at the grub command prompt we need an easy to find unique file
Start grub and do the following
#grub
            grub> find /boot/grub/flag
                (hd1,5)    -- the result of the find in my example
            grub> root (hd1,5)   -- using the result of the find in my example
            grub> setup (hd1)   -- install mbr -- my example parameters - if you get this wrong you will trash some other drive!!!
                  hopefully grub announces success
            grub> quit
Reboot and select the flash drive. In my case I still had the grub devicemap wrong and had to edit the grub commands during boot to tell grub how to find the correct partition and then edit them again after booting
Typical linux install issues that we all always seem to have and can be solved with a little (or a lot of) google research.
As I said at the beginning I now have an untouched windows installation and a nice fast Linux installation. I hope that this will be of some use to someone.

Hi chrissh
i tried this exact procedure... on the exact same notebook (T400s). However, as soon as I set the
   Bios>config>Serial ATA to "compatibility", I cannot use my default Windows installation! I immediately get the "blue screen of death".
I doubt I did anything differently since this is the first step of your procedure and my laptop is brand new!
any idea?

HT3986 i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed microsoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates?

i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates?

yes you need the updates and patches.
Only some of the drivers that Windows will automatically install at times
and always make sure to insure it is using restore points
do all the maintenance andsuch as normal
use MS Security Essentials for AV is really top notch
Clean disk space
Use WinClone new program to inisure you have a restore image

I kept a dual boot of windows 7 and mac os x lion in macbook pro. so, should i keep antivirus for windows 7? which is prescribable between bit defender(bd) and microsoft security essentials(mse)?does bd and mse un-installs easily?

i kept a dual boot of windows 7 and mac os x lion in macbook pro. so, should i keep antivirus for windows 7? which is prescribable between bit defender(bd) and microsoft security essentials(mse)?does bd and mse un-installs easily?

lower your font size unless you have difficulty
MS Security Essentials is excellent
Then again maybe time to investigate Windows 8 RP (which uses Defender)

I made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft helps in stop freezing?

i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft i.e, " support.microsoft.com/kb/979491" helps in stop freezing in dual boot mechanism?

Windows has a software updater built into Windows and when you install the Boot Camp drivers then it will install an Apple software updater also. I believe Windows is set to automatically download and install your updates as does the Apple software Updater. They both will update the individual files it needs to periodically.
"Microsoft updates" and "Windows updates" are basically the same thing in Windows. Are you talking about the "Windows support software" when downloading from Boot Camp Assistant? Apple installs a software updater for it's Boot Camp drivers in Windows 7 so you can do it manually or automatically.
The "Hot Fix" your referring to is only for certain motherboards built from other Windows only computer manufacturers and does NOT pertain to any Apple computers.
If you have a problem with your computer then it's best to ask a specific question so we can help better.

Dual booting between Solaris 8 and 10

Hi,
We mostly use Solaris 8 for testing which means I can't uninstall it. How would I be able to dual boot both Solaris 8 and 10 on a SUN SPARC machine? Is there a boot loader available like grub?
Please help.
Thanks alot!
Till later,
Joseph.

SPARC doesn't need a split boot loader like BIOS/x86. The OBP can directly load from any slice. So 'boot disk:a' would boot from slice 0 and 'boot disk:g' would boot from slice 6.
Darren

EFI partition deleted after removal of dual boot of OSX10.8 and Ubuntu/Linux Mint - using rEFIt

so, i recently installed ubuntu to check out the advances in the linux world since i last looked into them 10+ years ago... very impressed, but when i tried to delete ubuntu and remove the various partitions (which i was able to do just fine using gparted) reFIT still displayed the **** linux logo from the install i deleted....
OSX still boots fine... a install of Linux Mint i have on another partition(s) still boots fine ... everything appears to work... but i want to know what the possible issues are so i can be prepared...
this is frustrating...
so i went in and looked around with the remaining partitions and noticed the EFI partition which hadn't shown before i mistakenly tried to install another distro over ubuntu after wiping the partition it was on...
so i erased the EFI partition hoping that this would remove the g-damned hold out linux boot logo in reFIT... it didn't... now i suppose i can go back in and create a new EFI partition through gparted but that stupid linux logo will still be there... and i'll have another problem of getting the proper information back onto the EFI partition, which i am unsure of how to do, or where to even dig up the proper information...
i want to edit my boot mbr or grub or whatever the eff apple comps use as a boot record so that (or i am using as a boot record since i'm using reFIT) to get rid of this **** logo, so i can install another distro of linux and probably windows without having the **** supernumerary logo...
i would rather not wipe the whole drive (aka the primary partition the recovery partition) and do a fresh new install of os x (mountain lion) because i have OSX set up just the way i want it for personal use and work use... all my various tools and so on...
i don't use time machine and can't do a "restore" from a previous back up...
some one please help me out here, what are my options? am i going to have to bite the bullet and do a wipe of the entire drive and all its partitions to get my MBP back to 'normal'???
PS - using a macbook pro late 2011, standard specs, 13"...

stqn wrote:
Expi1 wrote:Thanks, I'm mostly struggling with how to partition for Arch and then how to do the bootloader. I'm using Win8 64-bit and from what I understand a Legacy BIOS bootloader. I'm not entirely sure what I should be partitioning the C: into, I've done partitions before, just not for Arch and then I'm not sure whether to use GRUB or syslinux, or if I even need those. Or if I need to use GPT or MBR?
Your disk is already partitionned so you don’t have to choose between GPT or MBR, the choice is already made.
You don’t partition “C:”, that is the name of a Windows partition. You partition a drive.
Grub or syslinux, use whatever the beginners guide tells you to. Personally I think syslinux is simpler which is why I’m using it (but I’m not dual-booting, if that matters).
You’re not saying what your problem is with partitionning, so it’s hard to help.
Thanks for getting back to me, I'm not sure if I just create one large partition for Archlinux or if I have to create multiple? Where I'm also confused is with the Creating Filesystems part of the guide. I don't understand how I'd do this in Windows, or what /dev/sda1 is referring to.
As for the bootloader part, the Beginner's Guide gives you a choice between syslinux and grub, what I'm not sure about is which to use considering I'm dualbooting. How it will affect my windows bootloader, do I disregard that and use GRUB now? I'm unclear on how that works.
I'm also aware I need to disable Secure Boot, I just searched my BIOS options and couldn't find anything remotely relating to that, so I'm assuming it's not an issue since this computer was originally on Windows 7 anyway?
Thanks again, Expi.
Last edited by Expi1 (2014-03-06 19:54:30)

Dual boot with Windows 7 and LINUX - Tecra A11 (PTSE1A-00L005)

Hi,
I bought a new Tecra A11 Laptop which runs WIN7 Pro. I want to install LINUX also. That means, I want to run my laptop in dual boot Win7 Pro/LINUX (any distributor). Please tell me how to do that.
There are 5 partitions on the HDD:
1. Active, Recovery partiton 1.46 Gb (no drive letter)
2. Active Primary C: Boot 145.04 Gb (NTFS)
3. Active Logical E: 78.13 Gb (NTFS)
4. Active Logical F: 64.25 Gb (NTFS)
5. Primary Partition 9.2 Gb (no drive letter, application unknown)
Hey, I need it badly, because I have admitted to a course of RHCE (Red Hat Certified Engineer)
Please help me

Hi
I may not be able to give You a step-by-step explanation but most distros today offer a possibility to co-exist with Windows.
During the installation the unused free space will be taken by Linux (with the consent of the user of course!!)
What exact setup is needed by You is impossible for anyone else to say, but I would suggest to make the space occupied by the F drive available for Linux.
You seem to have space enough for Windows and the Linux OS does not need much.
Some thoughts concerning your partition setup:
I would NOT touch 1,2 and 5 no matter what. They are your system and some system internal partitions (recovery environment and data) and would not be fun to lose.
1. Active, Recovery partiton 1.46 Gb (no drive letter)
2. Active Primary C: Boot 145.04 Gb (NTFS)
3. Active Logical E: 78.13 Gb (NTFS)
4. Active Logical F: 64.25 Gb (NTFS)
5. Primary Partition 9.2 Gb (no drive letter, application unknown)
So pick a Distro (my suggestion Ubuntu, Mint, Fedora, OpenSuse - Fedora will be the one closest related to RedHat) which will guide You through the steps to allocate space for Linux.
I would suggest however to remove the drive F in Windows so Linux does not start resizing all partitions.
I am sure that will work fine, but will just take time and the pretty unnecessary F drive will most surely be kept.
If You already have valuable data on your unit, make sure to back it up!! No software comes with warranties :)
Last but not least - make 100% sure to create a recovery set with the help of Toshiba Recovery media creator BEFORE you start installing Linux.
If something goes wrong You might want to have the possibility to put the unit back into factory state.
Good luck and keep asking if You need additional help!
Tom

Dual-Booting Arch Linux and Windows 7

Hello,
I am attempting to set up a dual-boot configuration with Windows 7 (installed first), and Arch Linux. When I went to install, I read in the documentation that the AIF doesn't support installing GRUB to a separate partition other than the MBR on the drive. I want to install GRUB separate from the Windows MBR so I can use Easy BCD to chainload the two bootloaders (i.e. installing GRUB on /dev/sda5 instead of /dev/sda). I went through the installation process and tried to install GRUB manually via the instructions given in the documentation. But when I went to boot Arch, I was greeted with the GRUB shell instead of the boot menu. What did I do wrong? And is there any easier way to install Arch this way given that I do not want to overwrite the Windows bootloader? I went ahead and wiped the Linux partitions on my drive, so I am going to do the install again once I have some suggestions.
Thanks!

joshuawagner147 wrote:
hyperreal_logic wrote:
To the original poster:
If you want to chainload both Windows and Arch Linux using your preferred boot manager, you'd have to create a separate 'boot' partition when installing Arch Linux. When you are in the Arch installation, create a separate partition of about 500 MB, then create the root partition of whatever size you need, and then create swap partition if necessary. So your HD would resemble something like this: /dev/sda5=boot partition of 500 MB; /dev/sda6=root partition of ## MB/GB; and /dev/sda7=swap partition of (RAM * 2) GB. Then continue with the Arch installation procedure until you get to the end where you are prompted to install a boot loader. Choose GRUB, and install it to the 'boot' partition on /dev/sda5. This will allow you to chainload Arch via Easy BCD. What happens is Easy BCD will pass the message to GRUB on /dev/sda5, and GRUB will then load your Arch root system on /dev/sda6.
I hope this helps. I support your choice in using Easy BCD to chainload Windows and Linux. Software is, after all, about choice. Furthermore, you've presented a good reason to use Easy BCD as the main boot loader, which is to save you from unnecessary tinkering with the GRUB shell or Live CDs and whatnot. However, if you don't want to create the separate 'boot' partition, then you'll have no other choice but to use GRUB or syslinux on the MBR.
Thanks. Yes...I followed the procedure just like you described. I figured that my problem was that I didn't create a separate /boot partition, so I reformatted the partitions I created and redid the install. However, I was not able to install GRUB in the AIF; I had to reboot into the Live CD and install GRUB to my boot partition manually. All is good now as I have a working dual-boot now. Arch Linux has been a sort of learning curve for me, but I have gained valuable knowledge and experience by using this distro.
Yes. I didn't want to mess with GRUB or NTLDR. I know that reinstalling NTLDR is not that difficult, but I didn't want to mess with it at all. It just seemed easier to chainload GRUB to NTLDR using EasyBCD. I'm a sort of "distro-hopper" anyhow, and using this method allows me to cleanly remove any distro I install without having to mess with GRUB or reinstalling NTLDR.
Thanks!
Glad to hear! Yes, Arch Linux is a wonderful distribution, and one of my favorites. It's great for not-so-newbie beginners to learn from. pacman is one of my favorite package managers, as there is always the latest stable software available in the Arch repos. Glad everything worked out. Have fun with Arch!

Anyway to dual boot either Linux and Mac OS X?

Is there a way to dual boot Ubuntu and Mac OS X similar to Boot Camp?

Here's where you start.
As an alternative you can purchase either Parallels Desktop for Mac or VM Fusion which provide virtual machines in which you can run various operating systems concurrently with OS X. Both products run various versions of Windows, Linux, and Unix.

Dual boot Windows 7 (64) and Arch Linux (64) problems

Hello:
I am new to Arch Linux and just finished installing the 64bit on my laptop. It had a prebuilt Windows 7 (64) installed which I kept but split the hdd from 160Gb to 80Gb and 80Gb. I installed Arch there and set 4 partitions, all of them as Logical - a 64 MB ext2 /boot partition; a 512 MB swap partition; a 15 GB root partition; and the rest as my /home partition. My partitions look like this:
Disk Drive: /dev/sda
Size: 160041885696 bytes, 160.0 GB
Heads: 255 Sectors per Track: 63 Cylinders: 19457
Name Flags Part Type FS Type [Label] Size (MB)
sda1 Primary Unknown (27) 12889.02
sda2 Boot Primary NTFS 106.93
sda3 Primary NTFS [] 73915.11*
sda5 Logical Linux ext2 65.81*
sda6 Logical Linux 509.97*
sda7 Logical Linux ext2 15002.92*
sda8 Logical Linux ext2 57549.55*
The install was succesful(this was running from the core install cd) and I installed GRUB to my /boot but when I restarted it loaded Windows 7. I have used Knoppix USB disc to boot and see my Arch Linux install files and edited the /boot/gur/menu.lst file.
In Windows I installed EasyBCD 1.7.2 and tried to get NeoGrub bootloader working as a dual boot. I tried getting rid of the boot flag for Windows with cfdisk and setting it to my (Logical) sda5. That did not work. So far the only way I have booted into my Arch Linux install has been by going to the Live CD, choosing "Boot from Existing Linux Install" and editing the command files there.
root (hd0,4)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
My goal is to get a dual boot working for Windows 7 and Arch Linux 64 and continue installing the Xorg and KDE to Arch. I just don't know what the problem is here. I don't mind reinstalling Arch if something went wrong, but I would like to keep my Windows running in order and add Arch on.
Any help would be greatly appreciated.

I ran the LiveCD and chose "Install to MBR hd0". I ended up with this:
setup hd(0,1)
Checking if "/boot/grub/stage1" exists.....yes
Checking if "/boot/grub/iso9660_stage1_5" exists.....yes
Running "embed /boot/grub/iso9660_stage1_5 (hd0,1)".....failed(this is not fatal)
Running "embed /boot/grub/iso9660_stage1_5 (hd16)".....failed(this is not fatal)
Running "install /boot/grub/stage1 d (hd0,1) /boot/grub/stage2 p (hd0,1) boot/grub/menu.lst".....failed
Error 31: File is not sector aligned
My entry for Windows into the menu.lst looks like this:
# (0) Arch Linux x64
title Arch Linux x64
root (hd0,4)
kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
initrd /kernel26.img
# (1) Arch Linux x64
title Arch Linux x64 Fallback
root (hd0,4)
kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
initrd /kernel26-fallback.img
# (2) Windows 7
title Windows 7
rootnoverify (hd0,0)
makeactive
chainloader +1

Lenovo G40-70 : Dual boot windows 8.1 and fedora 22

Buenas tardes Estimados, recurrí al foro porque no puedo ingresar a mi partición de W 8,1 que trae instalada de fábrica la laptop, por motivo que instalé Fedora 22 (en otra partición)Quizas mi error fue instalar Fedora en modo legacy,y cambiar la bios al modo UEFI no reconoce el disco duro por ende no dejar cargar windows 8,1 .,si me permiten puedo indicar a detalle el mensaje que presenta (Imagen) , de ser factible me puede ayudar a solucionar el dual boot sin dañar la partición de Windows (y respaldar información), caso contrario me gustaría me ayuden con alguna ISO original que contenga sus aplicaciones Pre Instaladas ya que me acostumbré a ellas.. y yo proceder a realizar nuevamente la instalación.Esperando su comprensión, me suscribo. Saludos.

No estoy seguro pero creo que cuando se instala Windows se coje la informacion de la licencia de la bios automaticamente, no tiene que ser un disco de recuperacion. En webs de descargas podras encontrar imagenes iso de windows aunque no se si son seguras, tengo isos originales de Microsoft descargados de Dreamspark por ser universitario, no se si hay otros medios oficiales. Yo tambien instale una distro GNU/Linux en mi caso Ubuntu, me documente bien e hice un usb de recuperacion de Windows, tengo compañeros que tienen que cambiar entre legacy y uefi para poder cambiar de SO. He encontrado una herramienta de microsoft para crear un dvd o pen de instalacion http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media

Unable to Boot Live CD's of other distros

Hi, I really like Arch Linux, but all the configuration is giving me a bit of a headache. While I'm going to keep it on my computer, I'm also going to add a more "user friendly" distro that I can use. However, when I load up a live CD, my computer no longer recognizes them since my install of Archlinux. I know my bios is set to boot from CD's too. Maybe it had something to do with when I configured my bootloader during the Archlinux installation?
Any help would be greatly appreciated!

Thanks that solved the problem! .... but still I can't quite figure out the problem since my system should definitely support acpi. A few days ago I used the same live cd without installing the system just to check if my netgear stuff works under archlinux ( it does) and I didn't had any issues with acpi or any other troubles during boot time. Then yesterday I installed windows 7 (+ nvidea graphics drivers + riva tuner + netgear drivers) on my machine and now after installing archlinux on the same disk (dual boot mode) I'm unable to load the kernel w/o using "acpi=off". Does win7 modify any acpi settings? Very unlikely I guess... maybe it's just a coincidence. Hmm... any ideas on that?

Dual booting to Linux Ubuntu (and other distros)

Similar Messages

Maybe you are looking for