DUMP ANALYSIS- DBIF_RSQL_INTERNAL_ERROR when reading data from infocube

HI ALL,
When i am trying to read the data from an info provider RSDRI_INFOPROV_READ.
the runtime error which is comig is DBIF_RSQL_INTERNAL_ERROR
it is throwing a dump which says An internal error in the database interface occurred during access to
the data of table "RSMDATASTATE ".
the lines at which it is dumping are
SELECT SINGLE * FROM RSMDATASTATE
INTO E_S_DATASTATE
WHERE INFOCUBE = I_INFOCUBE
I checked in the table RSMDATASTATE it is having an entry for the required infoprovider.
Please suggest me if anybody across this error in the past.
is there anything to do with cube settings rool ups and compression or something. Please suggeste me.
Thanks in advance
Best regards
SG

check this thread...
[Function Module 'RSDRI_INFOPROV_READ';
--- thanks...

Similar Messages

How to Read data from Infocube

Dear Friends,
I have requirement to read data from Infocube.
I know the Function module(FM) which SAP provided. The FM name is RSDRI_INFOPROV_READ.
But when i am trying to execute this FM in SE37, it giving "Error generating the test frame" message.
I called this FM in start routine, it giving error while loading.
If any using this please let me know, how to use this. If any have sample code, please share.
Thx
Raj

Hi,
i used to check documentation all time, but this time I forgot to check.
It is well documented. thx for igniting my mind.
bye
Raj

Error when reading data from socket

Hi,
I am getting the error 'NiRawReadError: An error occured when reading data from socket.' when using the ABAP API 'mo_core_service->invoke_matching'.
And I get this error only when I pass ABAP_TRUE to the paramter 'iv_wait_for_invocation' .
Can anybody help me in correcting this?

Hi Narasa,
The following error is already in discussion in the below forum.Plz consult the forum link you will find the error solution.
Problem in ABAP API - NiRawReadError: error when reading data from socket
Rgds
Ankit

Error when reading data from XML using JAXB?

Hi all,
I get the error message when reading data from XML using JAXB.
[org.xml.sax.SAXParseException: The entity name must immediately follow the '&' in the entity reference.]
     at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException
(AbstractUnmarshallerImpl.java:315)
     at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.createUnmarshalException(UnmarshallerImpl.java:481)
     at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(UnmarshallerImpl.java:199)
     at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:168)
     at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:137)
     at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:142)
I don't find the reason, please help!
Thanks in advance!

The problem is sovled.

Reading data from infocube

Hi all,
We have an infocube which contains some figures like number of days, number of hours etc. We should calculate some indicators on them, something like:
Ind = Hours1 * 100 / Hours1 + Hours2
where Hours1 and Hours2 are figures which come from two different records, with codes 1 and 2.
We are not using BEx, but some other reporting tool which takes quite a long time over it. So we were asked to write an ABAP program which should read the data out of the InfoCube and calculate these indicators on basis of such fomulas. Writing a Transfer Rule with the InfoCube as DataSource proved not to be such a good idea because data is split in packages for the upload, so a subroutine within the transfer rule might not be able to find the records with codes 1 and 2 within the same package and that gives errors.
The question is: does anyone know of programs/functions/classes which could do the job? so read data from the infocube and eventually update it back into the infocube after the calculations?
Thanks in advance,
Ioana

Hi Ioana,
maybe Analysis Process Designer (APD) can solve your problem. In an APD process you can read the data from any InfoProvider, calculate your key figures in an ABAP routine and write the result to an ODS. This ODS has to be transactional and can't be directly reported, but you can report the ODS data by defining an InfoSet on it; you can also write the ODS data to any cube via the data mart interface. The data package split shouldn't be a problem in the APD process because you can define a partitioning characteristic in the APD routine.
The APD is available in BW 3.x via transaction RSANWB.
Martin

Error reading data from Infocube using shell script.

Dear all ,
I am facing a problem while reading data from an infocube using a shell script.
The details are as follows.
One of the shell script reads the data from the infocube to extract files with the values.
The tables used for extraction by the shell script are :
from   SAPR3."/BIC/F&PAR_CUBE.COPA"     FCOPA,
       SAPR3."/BIC/D&PAR_CUBE.COPAU"    COPAU,
       SAPR3."/BIC/D&PAR_CUBE.COPAP"    COPAP,
       SAPR3."/BIC/D&PAR_CUBE.COPA1"    CCPROD,
       SAPR3."/BIC/D&PAR_CUBE.COPA2"    CCCUST,
       SAPR3."/BIC/D&PAR_CUBE.COPA3"    COPA3,
       SAPR3."/BIC/D&PAR_CUBE.COPA4"    COPA4,
       SAPR3."/BIC/D&PAR_CUBE.COPA5"    COPA5,
       SAPR3."/BIC/MCCPROD"      MCCPROD,
       SAPR3."/BIC/SCCPROD"      SCCPROD,
       SAPR3."/BIC/MCCCUSTOM"    MCCCUSTOM,
       SAPR3."/BIC/SCCCUSTOM"    SCCCUSTOM,
       SAPR3."/BIC/SORGUNIT"     SORGUNIT,
       SAPR3."/BIC/SUNIMOYEAR"   SUNIMOYEAR,
/*     SAPR3."/BI0/SFISCPER"     SFISCPER, */
       SAPR3."/BI0/SREQUID"      SREQUID,
       SAPR3."/BI0/SCURRENCY"    SCURRENCY,
       SAPR3."/BIC/SSCENARIO"    SSCENARIO,
       SAPR3."/BIC/SSOURCE"      SSOURCE
The problem is that the file generation by this script (after reading the data from teh infocube) is taking an unexpected time of 2 hours which needs to be maximum 10 mins only.
I used RSRV to get the info about these tables for the infocube:
Entry '00046174', SID = 37 in SID table is missing in master data table /BIC/MCUSLEVEL2
Entry '00081450', SID = 38 in SID table is missing in master data table /BIC/MCUSLEVEL2
and so on for SID = 39 and SID = 35 .
Checking of SID table /BIC/SCUSLEVEL2 produced errors
Checking of SID table /BIC/SCUSLEVEL3 produced errors
Can you please let me know if this can be a reason of delay in file generation (or reading of data from the infocube).
Also , Please let me know how to proceed with this issue.
Kindly let me know for more information, if required.
Thanks in advance for your help.
-Shalabh

Hi ,
In continuation with searching the solution to the problem , I could manage to note a difference in the partition of the Fact table of the infocube.
Using SE14 -> Storage Parameters, I could find the partition done for the fact table as :
PARTITION BY: RANGE
COLUMN_LIST: KEY_ABACOPA
and subsequently there are partitions with data in it.
I need to understand the details of these partitions .
Do they correspond to each requests in the infocube(which may not be possible as there are 13 requests in infocube and much more partitions).
Most importantly, since this partition is observed for this onfocube only and not for other infocubes, it is possible that it can be a reason for SLOW RETRIEVAL of data from this ionfocube( not sure since the partition is used to help in fast retreival of data from the infocubes).
Kindly help.
Thanks for your co-operation in advance.
-Shalabh

Error reading data from infocube using RSDRI_INFOPROV_READ

hi,
I am trying to write a Function module to read data from an Infocube.
This is a remote enabled Function module and is working fine if I make a few minor changes and customize it to read data from a case of a DSO.
However, for cube, code is showing no syntax errors, but on execution is not returning any data also.
I have tried defining E_T_data as E/F/V tables of the cube, but still not getting any output.
Probably this is related to structure of E_T_data only. . . .
Can anyone please guide me on this.
regards
Parikshit.

Hello,
E_T_DATA needs to defined as an internal table with all the fields you need as an O/P from the infocube you are trying to fetch data from. Just make sure, you keep the name of the fields same as Name of the infoobjects in the Cube. So just define e_t_data Standard internal table with all fields you want to fetch from Infocube (name of fields same as infoobject name).
Also fill in the g_th_sfc, g_th_sfk internal tables with the list of characteristics and Keyfigues you wanna o/p with chanm/kyfnm field populated with exact name of infoobject and chaalias/kyfalias same as defined in g_t_data (good to keep both same).
Thanks
Edited by: Sandesh Shetty on Jul 29, 2008 2:26 PM

Why some columns are not read into Power Pivot when reading data from a SQL query

I have this SQL query that I want to use to read data to PowerPivot from:
SELECT Score.FieldCount as fieldcount, Score.Record.GetAt(0) as predicted_gender, Score.Record.GetAt(1) as probability_of_gender, Score.Record.GetAt(2)
as probability_of_m,
Score.Record.GetAt(3) as probability_of_f, Score.Record.GetAt(4) as customerkey
FROM
SELECT * FROM dbo.myCLR1(
dbo.MyCLR2('c:\fILES\MLSM.xml'),
'SELECT * FROM [dbo].[Customer]') Input
) Score
After I click 'Finish' in "Table Import Wizard", I can only get 1 column (FieldCount) in Power Pivot window. Why don't I get the other 4 columns? If I save the result to a table I do get all columns but my goal is to dynamically present the result
so that's not an option. Can anyone shed some light?
Thanks,
Chu
-- Predict everything. http://www.predixionsoftware.com

If I only pass in query as
SELECT * FROM dbo.myCLR1(
dbo.MyCLR2('c:\fILES\MLSM.xml'),
'SELECT * FROM [dbo].[Customer]') Input
I do get 2 columns (FieldCount and Record as shown below)
-- Predict everything. http://www.predixionsoftware.com

How to use the readLine() method when reading data from a URL?

Hello,
I have a URL which contains text input.
The only way to get the data from this URL is by opening a URL connection to it.
I would like to get the data from this URL but at the same time I would like to be able to use readLine() method of BufferedReader in order to read the data line by line.
My question is how do I combine between these two requirements in order to reed the data from the URL?
Roy

Hello Roy,
can you try out this code.
URL yahoo = new URL("http://www.yahoo.com/");
        URLConnection yc = yahoo.openConnection();
        BufferedReader in = new BufferedReader(
                                new InputStreamReader(
                                yc.getInputStream()));
        String inputLine;
        while ((inputLine = in.readLine()) != null)
            System.out.println(inputLine);
        in.close();
Regards,
Mohan R

ORA-28522 error when reading data from DB2 via hsodbc

Hi All,
I'm trying to connect to a DB2 database running on an AS/400 system, via Oracle HS.
I'm using Oracle 9.2.08. The DB2 version is V4R5.
My ODBC DSN is called TEST_odbc.
The initTEST_sid.ora file contains the following:
HS_FDS_CONNECT_INFO = TEST_odbc
My Listener.ora file contains the following:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = vm-dashboarddemo)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(PROGRAM = hsodbc)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = TEST_sid)
My TNSNames.ora file contains:
TEST_name =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = VM-DASHBOARDDEMO)(PORT = 1521))
(CONNECT_DATA =
(SID = TEST_sid)
(HS = OK)
When I use TNSPing, I get a successful result:
D:\oracle\ora92\bin>tnsping TEST_name
TNS Ping Utility for 32-bit Windows: Version 9.2.0.8.0 - Production on 04-JUL-20
07 13:46:47
Copyright (c) 1997, 2006, Oracle Corporation. All rights reserved.
Used parameter files:
D:\oracle\ora92\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = VM-DASHBOARDDEMO)(PORT = 1521))) (CONNECT_DATA = (SID = TEST_sid)) (HS =
OK))
OK (10 msec)
I can then login to SQLPlus as SYSDBA, and create a database link:
SQL> create database link TEST_link connect to "<username>" identified by "<password>" using 'TEST_name';
Database link created.
So far everything seems to be going well.
But then, when I try and select some data from the linked database, i get the following:
SQL> select * from <tablename>@TEST_link;
select * from <tablename>@TEST_link
ERROR at line 1:
ORA-00942: table or view does not exist
[Generic Connectivity Using ODBC][IBM][Client Access Express ODBC Driver
(32-bit)][DB2/400 SQL]SQL0204 - ZASTSE00 in QGPL type *FILE not found. (SQL
State: S0002; SQL Code: -204)
ORA-02063: preceding 2 lines from TEST_LINK
Does anyone have any ideas? I'd love to get this solved!!
Many Many Thanks,
River

I should have mentioned that I know that the table exists in the database.
The main reason I'm trying to do this is because I'm trying to get the data from the DB2 DB into my Oracle DB. I have been trying the EXP utility, which gives me a different error code:
D:\oracle\ora92\bin>exp <username>/<password>@TEST_name file=TEST.dmp rows=yes indexes=no
Export: Release 9.2.0.8.0 - Production on Wed Jul 4 13:44:06 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
EXP-00056: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
Username: <username>
Password:
Connected to: Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
Note: indexes on tables will not be exported
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user <username>
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user <username>
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
Thanks Again,
Riv

How do I ignore the differences in DBMSs when reading data from a DB?

My boss wants me to create a text parser that parses the below sentence and executes an SQL query.
'get table field1,field2,field3,...,fieldN [where SQL conditional statements]'
This corresponds to 'select field1, field2, field3, ..., fieldN from table where blahblah'.
Since different DBMSs have different formats for timestamp, that sentence has to be changed for each DBMS.
One way to ignore the differences is to make a complex text anlayzer that converts a certain type of timestamp string to one that fits each DBMS.
But it looks ridiculous to adopt such a solution when there might be an elegant solution.
LabVIEW DB Toolkit is not capable of concealing the differences.
Does anybody have a better idea than I do?
Solved!
Go to Solution.

I remember having an issue like this when working with an older version of an Oracle server. I was able alter the session by setting 'NLS_TIMESTAMP_FORMAT'.
This page might be of interest; I found this when searching for 'NLS_TIMESTAMP_FORMAT'
Database Portability: Date and Timestamp Columns
(PS The Format Into String and Scan From String functions work nicely with the correct date format specifiers. See the link below in my signature for ISO 8601 timestamp/string conversions)
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Error in reading data from InfoSet

Hi Experts,
I am facing the below errros when doing a selection to retraive data.
@5C\QError@ Error when reading data from InfoSet Z40_2 (return code 1) @5F\QNo long text exists@ 17:56:24 A Preparatory Steps 1 Selection and Bundle Formation 00000000000195819816 1 E /BA1/F3_BASIS 6 1 1
@5C\QError@ Data transfer structures in EWLS object do not match @5F\QNo long text exists@ 17:56:24 A Preparatory Steps 1 Selection and Bundle Formation 00000000000195819816 2 E /BA1/F3_EWLS 117 1 2
Please let us know if any one knows why tehse erros apear and sloution for these.
Please do the needful,'
Thanks,'Mahesh

thanks

Read data from Oracle , not all data brought over

I have a strange problem when read data from Oracle and save to SQL Server.
For example , there are 20k rows of data in Oracle , I created SSIS data flow, and data saved in SQL Server , Everything looks fine. But late you will find only first 16k rows of data in SQL Server , the rest is simple missng. no error or any waring.
I am using OLE DB .
Great appreciate for any help.
Ray

Thanks. I think that UseSessionFormat=true
helped me fixed this kind of issue in my other project.
I actually found out this issue for this case I was asking. I am actually not missing data. It was a data type issue. A column was using a wrong datatype, so when I run a query and didn't get result I supposed.

ABAP short dump when loading data into Infocube

Hello All,
I am getting an ABAP short dump error when loading data into Infocube. I tried to load data from PSA and ODS.
I ran the code to compress the Infocube, no improvement still getting the same error.
Error Analysis:
A raise statement in the program "SAPLRSDU_PART" raised in the exception.
Internal Notes:
The termination occured in the function "ab_i fune" of the SAP Basis system. Specifically in the line 2316 of the module "//bas/620/src/krn/runt/abfunc. C#18".
The internal operation just processed is "FUNE"
Advance thanks !!!
Siv

Hello Siv,
try to run program SAP_DROP_EMPTY_FPARTITIONS to display existing partitions. Then compare it to the number of uncompressed requests. Maybe there's a mismatch.
SAP notes that might help: 385163, 590370
Regards,
Marc
SAP NetWeaver RIG, US BI

Error reading data from an infocube

Hello,
I want to read data from a remote infocube in tcode listcube, and I get this 2 error messages: "Error reading the data of InfoProvider IC_SNP_DR" and "Error when generating program". This is a remote cube reading data from a SNP Planning Area.
I´ve already activated Plng Object Strucuture 9ASNPBAS and repair all infoobject but in tcode /SAPAPO/MSDP_ADMIN in 9ASNPBAS I get message "Not All InfoObjects Can Be Read". Is this why I get the error in reading the infocube?
Does anyone know why I get this errors and how to solve them?
Thanks and Regards,
Teresa Lopes

Teresa
From /SAPAPO/MSDP_ADMIN go to extras/data extraction tools. This gives you all the things you need to manage the extractors on the snp planning areas. you can use RSA3 to test the extractor and pull data to a list. Are you sure you want to extract using the total POS (9SNPBAS). Based on the data you need you might want to extract based on one of the standard SNP aggregates. MALO (material location) for example.
You mention that the POS was active. Make sure you Planning area is also initialized
George

DUMP ANALYSIS- DBIF_RSQL_INTERNAL_ERROR when reading data from infocube

Similar Messages

Maybe you are looking for