Dump error in CRM: "Invalid param verb: enablesapsso"

Hi,
I am working on CRM 4.0. When i execute the transaction CRMD_ORDER_BP, i am getting short dump "Exception condition INVALID PARAM VERB: ENABLESAPSSO raised." with
"RAISE_EXCEPTION" C
"SAPLOLEA " or "LOLEAU10 "
"AC_FLUSH_CALL_INTERNAL" .
How to solve this issue?
Regards,
Raj.

Hi,
The system was not configured for SAP logon tickets.
login/create_sso2_ticket and login/accept_sso2_ticket were not set.
After setting the profile parameters (using transaction RZ10), i rebooted the application server, it is not giving me any dump errors.
Frédéric, thanks for your quick reply.
Regards,
Raj.

Similar Messages

DUMP ERROR: INVALID PARAM VERB : ENABLEAPSSO

I am working on CRM 4.0. After executing the transaction CRMD_ORDER_BP,
I got short dump "Exception condition INVALID PARAM VERB: ENABLESAPSSO raised." with "RAISE_EXCEPTION" C "SAPLOLEA " or "LOLEAU10 " "AC_FLUSH_CALL_INTERNAL" .
How to solve this issue?
Can anybody help me in resolving this issue? I would be thankful
prashant

I dont find must change in the behaviour while setting up profile parameters.
Could you pls give me the solution for this, as it is urgent.
I shall be thankful to you.
prashant

OLE_FLUSH_CALL invalid param verb: textstream

I'm developing a program that uses a whole load of alv grids on different tabs. When I process one particularl okcode, I get a dump: Exception condition "INVALID PARAM VERB: TEXTSTREAM" raised. 
 
<PRE>Trigger Location of Runtime Error
 Program SAPLOLEA
 Include LOLEAU10
 Row 224
 Module type (FUNCTION)
 Module Name AC_FLUSH_CALL_INTERNAL</pre> 
As far as I can tell, this is happening at the end of the PAI. After all my code has run.
The VERBS table contains 
<pre>1 1 TextStream G
2 3 TextStream G
3 4 CreateObject C
4 7 SetDataFromUrl C
5 7 GetDataAsFormat C
6 14 AssignProperty2 C
7 18 FreeObject C
8 19 FreeObject C</pre> 
The PARAMS table contains 
<pre>1 1 12 _RESULT 2
2 2 12 _RESULT 2
3 3 12 #1 5
4 3 3 #2 6
5 3 12 _RESULT 7
6 4 12 #1 8
7 4 12 #2 9
8 4 12 #3 10
9 5 12 #1 11
10 5 12 #2 12
11 5 12 _RESULT 13
12 6 9 #1 13
13 6 12 #2 15
14 6 9 #3 16
15 6 12 #4 17
16 7 9 #1 13
17 8 9 #1 7</pre>
 The VARS table contains 
<pre>1 000000 000 O 11
2 _RESULT 000000 000
3 000000 000 O 11
4 000000 000 O 2-
5 000000 000 {799104C5-04C5-11D0-AC56-080009D23306}
6 000000 000 1033
7 _RESULT 000000 000 O 1-
8 000000 000 APPLICATION
9 000000 000 X-R3TABLE
10 000000 000 SAPR3://DE56416140B66CF1B07A0015177DB7B9
11 000000 000 APPLICATION
12 000000 000 X-R3TABLE
13 _RESULT 000000 000 O 53
14 000000 000 O 8
15 000000 000 r3TableAutoObj
16 000000 000 19
17 000000 000 ToolBarButtonsTable2
18 000000 000 O 2-
19 000000 000 O 2-</pre> 
Note, I'm not doing any explicit OLE stuff. There's a couple of other threads I've seen with this issue, but no resolution. I'm on patch 13 of 7.10 sapgui.
 
thanks
 
matt
 
Edited by: Matt on Jun 11, 2009 4:51 PM

>
amit saini wrote:
> u might have to search for a note on this..
>
> SAP is using CL_GUI_TEXTEDIT class and using GET_TEXT_AS_STREAM method to pull text from STXH table...
I guess even the reply is from there itself.
Exception condition "INVALID PARAM VERB: TEXTSTREAM" raised.

Exception condition "INVALID PARAM VERB: TEXTSTREAM" raised.

Hi,
I am getting The error "Exception condition "INVALID PARAM VERB: TEXTSTREAM" raised." when we got to va03, GOTO->HEADER->TEXTS-> Double click on "Internal Order Comments".
Dump:
The termination occurred in the ABAP program "SAPLOLEA" in
"AC_FLUSH_CALL_INTERNAL".
The main program was "SAPMV45A ".
                                                                                The termination occurred in line 220 of the source code of the (Include)
program "LOLEAU10"
of the source code of program "LOLEAU10" (when calling the editor 2200).
Any body has any idea on this issue?

Hi,
The dump comes in FM: 'AC_FLUSH_CALL_INTERNAL' when it tries to call,
CALL FUNCTION 'OLE_FLUSH_CALL' DESTINATION OLE_DESTINATION
         EXPORTING IMPORT_XML      = XML_DATA_STRING
                   SVARS           = SVARS
         IMPORTING EXPORT_XML      = XML_DATA_STRING
                   EXCEPT_DESCRIPT = OLE_MESSAGE
                    SVARS           = SVARS
         TABLES VERBS           = VERBS
                 PARAMS          = PARAMS
                 VARS            = VARS
                SVARS           = SVARS
                 RFC_QUEUE       = RFC_QUEUE
                 XML_DATA_STREAM = XML_DATA_STREAM
                 ERROR_INFO      = ERROR_INFO
         EXCEPTIONS SYSTEM_FAILURE      = 1 MESSAGE OLE_MESSAGE
                    CALL_METHOD_FAILED = 2
                    SET_PROPERTY_FAILED = 3
                    GET_PROPERTY_FAILED = 4
                    RFC_QUEUE_FAILED    = 5
                    XML_DATA_FAILED     = 6.
OLE_DESTINATION = "SAPGUI"
It is working fine for "Special Picking Instruction" but not working for "Internal Order Comments".
More over for other orders everything is working fine. and even in Test system everything is working fine.
Edited by: Manankumar Desai on Jan 22, 2009 10:19 PM

INVALID PARAM VERB: SECURESAVEDA

Hi,
I am experiencing 'Exception condition "INVALID PARAM VERB: SECURESAVEDA" raised' after using SE38 with program RSO_BC_FILES_IN_BDS. In the ABAP runtime error, it also says
Termination occurred in the ABAP program "SAPLOLEA" - in
"AC_FLUSH_CALL_INTERNAL".
The main program was "RSO_BC_FILES_IN_BDS ".
In the source code you have the termination point in line 224
of the (Include) program "LOLEAU10".
And in line 224, it says 'CALL FUNCTION 'OLE_FLUSH_CALL' DESTINATION OLE_DESTINATION'
Please advise on a way forward with this.
Cheers

Hi,
The dump comes in FM: 'AC_FLUSH_CALL_INTERNAL' when it tries to call,
CALL FUNCTION 'OLE_FLUSH_CALL' DESTINATION OLE_DESTINATION
         EXPORTING IMPORT_XML      = XML_DATA_STRING
                   SVARS           = SVARS
         IMPORTING EXPORT_XML      = XML_DATA_STRING
                   EXCEPT_DESCRIPT = OLE_MESSAGE
                    SVARS           = SVARS
         TABLES VERBS           = VERBS
                 PARAMS          = PARAMS
                 VARS            = VARS
                SVARS           = SVARS
                 RFC_QUEUE       = RFC_QUEUE
                 XML_DATA_STREAM = XML_DATA_STREAM
                 ERROR_INFO      = ERROR_INFO
         EXCEPTIONS SYSTEM_FAILURE      = 1 MESSAGE OLE_MESSAGE
                    CALL_METHOD_FAILED = 2
                    SET_PROPERTY_FAILED = 3
                    GET_PROPERTY_FAILED = 4
                    RFC_QUEUE_FAILED    = 5
                    XML_DATA_FAILED     = 6.
OLE_DESTINATION = "SAPGUI"
It is working fine for "Special Picking Instruction" but not working for "Internal Order Comments".
More over for other orders everything is working fine. and even in Test system everything is working fine.
Edited by: Manankumar Desai on Jan 22, 2009 10:19 PM

Dump error when clicked on text elements in SAP Script window

Hi All,
There is an inclusion in SAP Script. I have written the code in driver program. I need to pass the value to SAP Script in the requested position. But when I go to SE71 > Form Name > Change or Display > MAIN Window > Text Elements > I get a dump error.
Category ABAP Programming Error
Runtime Errors DATA_LENGTH_TOO_LARGE
Except. CX_SY_RANGE_OUT_OF_BOUNDS
ABAP Program SAPLSTXK
Application Component BC-SRV-SCR
Date and Time 30.04.2014 20:00:08
Short text
 Invalid partial field access: Length is too large
What happened?
 Error in the ABAP Application Program
 The current ABAP program "SAPLSTXK" had to be terminated because it has
 come across a statement that unfortunately cannot be executed.
What can you do?
 Note down which actions and inputs caused the error.
 To process the problem further, contact you SAP system
 administrator.
 Using Transaction ST22 for ABAP Dump Analysis, you can look
 at and manage termination messages, and you can also
 keep them for a long time.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
 caught in
 procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the executed program "SAPLSTXK", the system attempted to access the field
 "ITF_TOKEN" of the type "C" and with the length 255 using the length 272.
 However, a partial field access with a length specification that is
 larger than the field length is not allowed.
How to correct the error
 Reduce the length used to access the field.
 If the error occures in a non-modified SAP program, you may be able to
 find an interim solution in an SAP Note.
 If you have access to SAP Notes, carry out a search with the following
 keywords:
 "DATA_LENGTH_TOO_LARGE" "CX_SY_RANGE_OUT_OF_BOUNDS"
 "SAPLSTXK" or "LSTXKFRN"
 "TOKEN_COMMENT"
 If you cannot solve the problem yourself and want to send an error
 notification to SAP, include the following information:
 1. The description of the current problem (short dump)
 To save the description, choose "System->List->Save->Local File
 (Unconverted)".
 2. Corresponding system log
 Display the system log by calling transaction SM21.
 Restrict the time interval to 10 minutes before and five minutes
 after the short dump. Then choose "System->List->Save->Local File
2937 * todo empty comment ???
2938 if g_tm_open eq true or " Section
2939 g_tm_b_close eq true.
2940 l_token = '\chcbpat0'.
2941 l_len = strlen( l_token ).
2942 token_control = true.
2943 assign l_token to <itf1>.
2944 perform put_itf1_new using l_len.
2945 perform token_line_begin changing l_next_token.
2946 else. " without section
2947 concatenate '\chcbpat0\line' g_cf_string l_cbpat_token into l_token.
2948 l_len = strlen( l_token ).
2949 token_control = true.
2950 assign l_token to <itf1>.
2951 perform put_itf1_new using l_len.
2952 endif.
2953 elseif l_next_token-code eq ')L'. " \par
2954 l_token = '\par'.
2955 l_len = strlen( l_token ).
2956 token_control = true.
2957 assign l_token to <itf1>.
2958 perform put_itf1_new using l_len.
2959 elseif l_next_token-code eq '(C' or " \par + format
2960 l_next_token-code eq ')C' or
2961 l_next_token-code eq '(&' or
2962 l_next_token-code eq 'TA' or
2963 l_next_token-code eq 'SC' or
2964 l_next_token-code eq 'ST'.
2965 concatenate '\chcbpat0\par' g_pf_string g_cf_string l_cbpat_token into l_token.
2966 l_len = strlen( l_token ).
>>>>> itf_token(l_len) = l_token.
2968 token_control = true.
2969 assign l_token to <itf1>.
2970 perform put_itf1_new using l_len.
2971 endif.
2972
2973 * Step 7: (L to disarm
2974 if g_compose eq true and
2975 l_next_token-code eq '(L'.
2976 perform read_next_itf_token(rstxscan) using p_token.
2977 endif.
2978
2979 ENDFORM. " token_comment
2980 *&---------------------------------------------------------------------*
2981 *& Form create_lang_info
2982 *&---------------------------------------------------------------------*
2983 * add default language to rtf
2984 *----------------------------------------------------------------------*
2985 * -->P_HEADER text
2986 * <--P_RESULT text
How do I open the text elements? I need to pass the variable inside SAP Script.
Please Help. The requirement is pending from very long. Not able to rectify this issue.
Regards,
Rekha

Hi,
There is a SAP Note about this problem
566794 - Runtime error: STRING_OFFSET_TOO_LARGE during conversion
Correction Instructions
Correction Instructions
Software Component
Valid from
Valid to
Number
SAP_BASIS
46B
46D
473267
SAP_BASIS
610
620
473185
Support Packages & Patches
Support Packages
Software Component
Release
Support Package
SAP_BASIS
46B
SAPKB46B48
46C
SAPKB46C39
46D
SAPKB46D28
610
SAPKB61027
620
SAPKB62014
Regards
Miguel

Screen dump error

Hi experts
In our development system - T-code:CA03 after entering when we clicking header icon dump error is coming.
All other icons are working fine.
Our ABAPer also checked screen 1200 is active.
what can be the other possible reasons.?
Regards,
srihari.M

Hi,
if you are coming across with the following error as
DYNPRO_SYNTAX_ERROR and 'Screen "SAPLCPDA" 1200 could not be generated'
Use SAP note [DUMP with DYNPRO_SYNTAX_ERROR when creating , changing or displaying|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3135343933363426]
Thanks
Hrishi

Dump Error during Sales Order Craetion

Dear Mates
While creating Sales Order in VA01 iam getting dump error.
Error Message is
RUN TIME ERROR : SAPSQL_INVALID_TABLENAME
EXCEPT : CX_SY_DYNAMIC_OSQL_SEMANTICS
The raeson for exception is "Invalid table name KOTD801was specified in the open SQL Command
Due to one of the following reasons, the error occurs only at runtime:
- the table name was specified dynamically, or
- the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
ORDER-BY clause was specified dynamically.
I have created condition table and put up in Package Z001 and iam not sure where i have mistake,Can anybody throw somelight on this issue.
Thanx in Advance
Karthik

SAPSQL_INVALID_TABLENAME
"Invalid table name KOTD801was specified in
       the open SQL Command
In normal circumstances, system will throw the above error where no table exists with the specified name.   This means, the second one is self explanatory. Could you let me know as to whether you are creating sale order with standard order type.
Nevertheless, you can take the help of ABAPer and before keying in VA01, maintain "/h" on top menu bar and then start creating sale order in debug mode so that your ABAPer can help you out.
thanks
G. Lakshmipathi

An error has occurred:Invalid postback or callback argument in InfoView

Hi Friends,
When i try to change the parameter values and click OK button while scheduling a report in InfoView, i am getting the following error:
An error has occurred:Invalid postback or callback argument. Event validation is enabled using in configuration or in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager. RegisterForEventValidation method in order to register the postback or callback data for validation.
Till now i have not find any good solution for this. Please help in providing any better solutions to fix this.
Edited by: Shivananda Puli on Aug 6, 2010 11:55 AM
Edited by: Shivananda Puli on Aug 6, 2010 11:55 AM

This forum is for questions in regards to using the SDK within a custom application, since you are using Infoview, please post this in the applicable forum under the [Business Objects|/community [original link is broken]; section

Dump error while creating a new page in smartforms URGENT pls!!!

while creating a new page it is showing me a dump error , that the superior program execption was not intercepted , i have even given the next page field also correctly, i have attached a mainwindow to that page and a text element to that . .
thanks
sridhar

Hi Deena,
This error:
"[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
is known issue
Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
You need to apply that patch.
I hope this helps,
Thiago Leoncio.

Difficulty downloding Adobe Reader and Error 1327. Invalid Drive H:\

I am having a difficulty downloading Adobe reader on my laptop. For some reasons, I am getting error 1327. Invalid Drive H:\ notification. I have followed the tips on how to resolve this issue from Adobe's help and FAQ pages, but I am still not able to download Adobe reader. This issue begun short while after I installed a Tuneup software from AVG. I contacted this Tuneup company, and one of it's representative guided me through the steps on how to resolve the problem; unfortunately, the correction attempt did not make any difference. Adobe tech support team can fix my issue, but at a cost of $ 40. I do not want to pay it. Hence, I am trying to solve this problem myself. Could any one, who has the knowledge to deal with this issue, please respond to my request?
Thank you in advance for your assistance. I look forward to hearing from you.
Best regards,
Peter VK Mayangi

Have you tried both solutions on the link from the earlier poster? Microsoft Fixit did not fixit?
If so, you will have to search the registry manually for your invalid drive H:\
Please post back if you are unsure what to do when you find that registry entry.
P.S. please do not post your email address and other private data in this public forum!

HT2292 gnature can't can't update new version of itunes due to error message saying invalid siupdate new version of itunes due to error messagecan't update new version of itunes due to error message saying invalid si saying invalid si

can't update new version of itunes due to error message saying invalid si

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Short dump error report

What is the purpose of short dump error report generated by the system? What r the major parts/section of this report?

hi please look through this:
Whenever any transaction or any process is executed it hits an ABAP code.
If there is any issue in executing the code the situation is called "ABAP DUMP" or 'Short Dump'
Transaction ST22 is used to check any ABAP Dump within a given duration.
U can also fix the issue with the help of ABAP editor (Transaction Code SE38) if u r good with ABAP.
you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
sap-basis sap-basisAll Groups Ignore this text box. It is used to detect spammers.If you enter anything into this text box, no search results will be displayed.
SAP Groups > Technical-functional > sap-basis > Message
About This Group | Invite peers to join this group
<< Prev thread < Prev msg Next msg > Next thread >>
short dump----urgent
Reply from Keith Lewis on 5/2/2003 3:22:00 AM
Good explanation Joy, but it is not only limited to the current day and
yesterday. If you click on the Selection button you can select previous
days as well. In fact you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
Cheers
Keith
SAP R/3 Support Specialist
Information Services International
Tel +44 1664 41 6178 Mobile +44 7887 627818
E-mail email@removed
Archive Page - http://www.ittoolbox.com//I/sap-r3-basis.asp
Dear sreenivas
If you receive an error message in the R/3 System log (SM21), or if you
see
a terminated update in the update service analysis transaction (SM13), or
DB
realated error ,check for dumps using the dump analysis transaction
(transaction ST22), or choose Tools -> Administration -> Monitoring ->
Dump
analysis.
Transaction ST22 enables you to analyze short dumps from the current and
previous day.
The dump analysis function shows you:
What happened
What you can do
How to correct the error
The dump analysis function also provides an error ID and keywords that you
can use to search in SAPNet, as well as information about:
The system environment
Users and transactions
Transaction ST22 enables you to analyze the following data:
Date, time, user, client
Contents of system and data fields
Contents of internal tables and application tables
ST22 is a very nice feature in SAP. This is where all the system errors
and users mistakes showed up. If there is a problem that you cannot
solve and you contact SAP support, they look at this area to analyze it.
This gives us lead where to handle the problems.
Error analysis
How to correct the error
System environment
User, transaction...
Information on where termination occurred
Contents of system fields
Chosen variables
Active calls / events
Internal notes
Active calls in SAP kernel
List of ABAP programs affected
List of internal tables
Directory of application tables (contents)
Directory of data areas (administration information)
Directory of data areas (contents)
ABAP control blocks CONT
End of runtime analysis
i think this would be helpful
regards
sravani

Short Dump Error

Hi Everyone,
I'm loading 690k odd records to cube
I am facing short dump error while data request is processed to cube.
In ST22 i'm getting Timeout Error.
Buffer time is set for 10mins to process
Can anyone guide me in this issue.
Thanks in advance

Hi,
Due to data volume your load took more than 7hrs. in general time out time is 7hrs. so in your case its may exceeded.
Try to increase time out time for your info package.
Go to your info pack--> menu scheduler --> time out time--> increase 7 hrs to 14hrs and trigger your load again. if its full load delete failed load and retrigger.
Thanks

Short dump error when using count(*)

Hi Experts
I am getting a short dump error when selecting the records >= current date - 30 see the coding and comment please correct the coding I want to know the ztable records it is important for command interface.
I have 1402345 records available after deleting the records but as the memory is not enough it is giving short dump error
select count(*) from ZINT_TABLE
select count(*) from ZINT_MSGS
 select * from zint_data
 nto table izint_d2 . "PACKAGE SIZE 20000
 where STATUS = 'OK' AND CREATED_ON >= w_date1. " VALUE
endselect.**
report z_eslp_command_records.
data: cnt type i.
data: cnt2 type i.
data: cnt3 type i.
data: cnt4 type i.
DATA:
 w_date1 like sy-datum .
DATA:
 w_date2 like sy-datum.
data: izint_msgs type table of zint_msgs.
data: izint_data type table of zint_data.
data: izint_m2 type table of zint_msgs.
data: izint_d2 type table of zint_data.
INITIALIZATION.
w_date1 = sy-datum - 30.
w_date2 = sy-datum - 30.
select * from zint_data
 into table izint_data PACKAGE SIZE 3000
 where STATUS = 'OK' AND CREATED_ON <= w_date1. " ZERO
endselect.
select * from zint_msgs
 into table izint_msgs PACKAGE SIZE 3000
 where CREATED_ON <= w_date2. " ZERO
endselect.
select * from zint_data
 into table izint_d2 PACKAGE SIZE 20000
 where STATUS = 'OK' AND CREATED_ON >= w_date1. " VALUE
endselect.
select * from zint_msgs
 into table izint_m2 PACKAGE SIZE 20000
where CREATED_ON >= w_date2. " VALUE
endselect.
select * from zint_data
 into table izint_data2
where STATUS = 'OK' AND CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
ENDSELECT.
select * from zint_msgs
 into table izint_msgs2
where CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
ENDSELECT.
sort izint_data by created_on ascending.
sort izint_msgs by created_on ascending.
sort izint_d2 by created_on ascending.
sort izint_m2 by created_on ascending.
describe table izint_data lines cnt.
describe table izint_msgs lines cnt2.
describe table izint_d2 lines cnt3.
describe table izint_m2 lines cnt4.
write:/ ' Note: THE RECORDS COUNTED SHOULD SHOW ZERO ELSE THE SCRIPT FAILED TO RUN' color 3.
skip.
write:/ '1. Records counted in ZINT_DATA <=current date - 30 :' color 2, cnt color 4.
write:/ '2. Records available in ZINT_DATA >=current date - 30 'color 4, cnt3 color 4 .
skip.
write:/ '2. Records counted in ZINT_MSGS <=current date - 30 :' color 2 , cnt2 color 4.
write:/ '4. Records available in ZINT_MSGS >=current date - 30 'color 4 , cnt4 color 4 .
TOP-OF-PAGE.
WRITE:/55(60) ' WAGNERS INVESTMENT LIMITED '.
WRITE:/50(40) ' Command Interface Data' CENTERED .
WRITE:/50(40) '----
' CENTERED .
FORMAT INTENSIFIED ON.
SKIP.
"FORMAT COLOR COL_HEADING.
ULINE.
FORMAT COLOR 1.
END-OF-PAGE.

Answer

Dump error in CRM: "Invalid param verb: enablesapsso"

Similar Messages

Maybe you are looking for