Dump Error during Sales Order Craetion

Dear Mates
While creating Sales Order in VA01 iam getting dump error.
Error Message is
RUN TIME ERROR : SAPSQL_INVALID_TABLENAME
EXCEPT : CX_SY_DYNAMIC_OSQL_SEMANTICS
The raeson for exception is "Invalid table name KOTD801was specified in the open SQL Command
Due to one of the following reasons, the error occurs only at runtime:
- the table name was specified dynamically, or
- the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
ORDER-BY clause was specified dynamically.
I have created condition table and put up in Package Z001 and iam not sure where i have mistake,Can anybody throw somelight on this issue.
Thanx in Advance
Karthik

SAPSQL_INVALID_TABLENAME
"Invalid table name KOTD801was specified in
the open SQL Command
In normal circumstances, system will throw the above error where no table exists with the specified name. This means, the second one is self explanatory. Could you let me know as to whether you are creating sale order with standard order type.
Nevertheless, you can take the help of ABAPer and before keying in VA01, maintain "/h" on top menu bar and then start creating sale order in debug mode so that your ABAPer can help you out.
thanks
G. Lakshmipathi

Similar Messages

Getting dump error in Sales order creation mode while going to item texts

Hi,
I'm getting an ABAP dump error while going to item text tab in the creation mode of a sales order. This issue is happening only when we make a manual entry in the item text field for a particular text type Y011 in the preceding document of the sales order. Otherwise everything is working fine.
When I checked the settings in SPRO under SD - Text Control - Sales Doc - Item, the definition and assignment for the TEXT type Y011 is maintained correctly. Not sure why the issue is happening only with this text type.
Please assist. Thank you
Taiseer

Thank you for the reply.
We had tried this already. However, since the error is with standard program with many function modules. They are finding it difficult.
There is strange side also for this error that I missed to update. When I replace the Text Id Y011 with a new one it is taking me to the line item text tab with out any error even though I'm using the same access sequence and other settings. However, after saving the order and displaying the order number, immediately it is going to dump again.

Dump during sales order creation for a config material (uding order BOM)

Dear all,
I am getting the following error during sales order creation for a configurable material
When I click on 'Engineering' tab in the characteristics value assignment for the parent material i.e. sales order material I get dump with following message,
'Field symbol has not yet been assigned'
Thanks,
Yogesh

Yogesh,
what was the problem ?
Thanks,
Pavan Verma
Edited by: Pavan Verma on May 11, 2010 9:31 AM

Update error in RV_SALES_DOCUMENT_ADD during Sales order creation

I get an Update/ ABAP runtime error during Sales order creation. The error occurs during processing of the update module -RV_SALES_DOCUMENT_ADD.
This error does not occuring always, as I am sometimes able to create a Sales order without getting update error. I am getting the error of all types of Sales orders and even contracts.
Am I missing any configuration parameters?
Thanks,
Chitra

Yes , I can see the error in ST22.
While exceuting VA01 (Oder type OR, Entering Sold-to-party, Purchase order NO, Material, Qty, Plant),
- I get run-time error "Run-time error "GETWA_NOT_ASSIGNED" occurred".
    Analysis of error shows:
     Update terminated in "Update module: RV_SALES_DOCUMENT_ADD"
      Fails in the Read table in one of the form
        Termination occurred in the ABAP program "SAPLV45U" - in "VBAP_BEARBEITEN"
The main program was "RSM13000 ". In the source code you have the termination point in
line 147 (READ TABLE FYVBAP WITH KEY VBAP_KEY.)
of the (Include) program "LV45UF0V".
The ABAP's say the functional module is trying to do an 'UPDATE' instead of 'INSERT" in the internal table FYVBAP.
Thanks,
Csuman

100% advance payment during sales order creation

Dear Experts,
One of our international client is having one requirement for collecting the 100% advance payment from customer during sales order creation itself. Our customer is in Germany.
For high risk customers they want to collect the advance payment for 100%. And if this 100% advance payment was not paid by customer then, sales order should not be processed.
And during regular sales invoice creation the same down payment also needs to be displayed in the invoice as advance payment.
Is it possible to setup this process using milestone billing.?? .or some other process is available to setup this process.
Thanks for your cooperation.
Warm Regards,
Velmurugan

Hi
Try with this with Credit management.Put High Risk with Error message.
When ever you will Create Sales Order it will Block due to Credit Chech.For this scenario Enter the Parking Vale at F-66.
Then make a entry for Customer-CR to BANK-DR.
This may solve ur requirement.
Regards
JS

Bypass static creidt limit check during sales order simulation BAPI

Hello All,
We have standard static credit limit check activated.. But, we donot want this to be checked while simulation of standard sales order BAPI... i.e. the check should remain,,, but we have a requirement that the customer should be allowed to see the result of his desired sales order's simulation, even if his credit is zero, for which we are using the bapi BAPI_SALESORDER_SIMULATE,, problem is that the BAPI performs the static credit limit check and returns with static credit limit exceed error,, is their any way to bypass this check during sales order simulation only...????
any help in this regard would be highly appreciatable..
thanks

I don't think it is feasible, unless you want to do a core modification of SAP code. Also simulation would work differently than the real order, it wouldn't be a good simulation, would it?
Have your SD consultant thought about using an inquiry or quotation instead?

Credit Check during Sales Order Change (VA02)

Hi,
We have implemented a credit management system, where the sales order will not get saved if the credit limit is exceeded. Now this check is working fine during sales order creation. But in VA02 during sales order change, the system is giving an information message that the credit limit is exceeded, but is allowing to save the order, which is not desirable. Could you all please help me in finding a solution to this problem..
Thanks & Regards,
Ritam Bera

Hi
Kindly check that you are using simple credit check or automatic credit check(Statis or Dynamaic) below settings
If Automatic credit check then go to OVA8 -automatic credit control area with combination of Credit control area/Risk category /credit group,Check in the reaction field you have mentioned the error or warning (B or A) .
Prerequisites for credit management to work in Sales and Distribution:
1.Assign credit control area to company code
2.Maintain the credit limit in FD32 with details of risk category and the credit limit value
3.Do the settings in OVA8 -automatic credit control area with combination of Credit control area/Risk category /credit group,Check in the reaction field you have mentioned the error or warning (B or A) .
4.Assign the credit groups to the sales and delivery document types.
5.Maintain the Subtotal 'A' in the pricing procedure against which value the sytem should check the credit limit.
If you have any further clarifications on above let me know
Regards
Damu

Config to select Checking Rule "A" during Sales order availability check

Hi All,
Please can you tell me the config that tells system to select the checking rule "A" during sales order availability check. The problem at my client side is that the system was using the checking rule "A" initially but suddenly it has started using checking rule "B" (delivery) for sales order. The item category being used in YAN and Scheduline Line category is YC (ATP and Allocation allowed).
The checking group is getting picked up correctly from the Material Master value.
I have tried to find all the possible config that might be causing this issue, but I am unable to find one. Based on my understanding of the SAP SD process, there is no place where we can define in system to use the "checking rule" for SD availability check. This is the default (hard-coded) in the system.
Please can you help me to find how the checking rule "B" might be getting called instead of "A".
Regards,
Swapnil

Hi
Checking rule is transaction based like A for SD sales order and B for SD delivery like that it is defined
So in a sales order the system checks with the combination of AChecking rule and the Checking group defined in MMR and for that combination we give controls in OVZ9 and based on that system makes availability check
Every one and all SAP materials including myself say Checking Rule is transaction based and picked up by the system thro hard coded controls
But In t code OPJL it is possible to define new checking rules that means customization is possible
But where is the link or assignment
For this nobody has given correct answers including the PP friends
For you the system is shifting the Checking Rule from A to B in the sales order itself means we can find out get where the said assignment is done
In OVZ9 remove the combination Checking rule B and your Checking group and save
You said the system has shifted its Checking rule to B from A
Now test it after removing this control in OVZ9 and see the system is shifting once again to A or throwing error as the control is removed in OVZ9
make sure that you do this in a sales order and post back
Regards
Raja

Error in Sales order - Consumption account not found

Hi Gurus,
I am facing an error in Sales order - 'Consumption account not found'. The scenario is third party. In sales order, it says 'Consumption account not found'. the item category is TAS and scedule line category has general modification key 'VKA'. And as it is third party, thr is no movement type for the schedule line category. The valuation class of the material is 3334 (software services). I was thinking In OBYC, under GBB key, this combination of my val. grping code+ 3334 + VKA and relevant GLs shud exist.
But in my development client, i dont get any error for the same material. And in thr also, thr is no mention of entry like above combination in OBYC. So its making me think that its not config error. But its an issue of master data or GL data.
Please help me . This is critical.
-Prashant

Hi,
Your observation is perfectly write, the possible errors are
1. Check the combination of Account modifier of Purchase order account assignmnet or PR. Based on the modifier and check the relevent combination in OBYC
Valuation ClassAccount ModifierIf Groups is there + Transaction Event Key + Gl Accounts
2. If GL Account is available then check the GL Master through FS00 for validation of mandatory consumption is required and i feel there is no issue with material master.
Rewards if it helps
Regards
Goutham

Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'

Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'
Not able to book the sales order because of this issue

Order Management does not support the inclusion of optional service items in a configured Model BOM (see Support article #1296751.1 for more detail). Allowing for such would therefore require customization.
As you've found, there's no modeling restriction that prevents you from creating a Model BOM that includes optional service items, nor is there any problem with creating a Configurator Model for it. And required service items (such as a warranty item that is a required child of an optional BOM component) do not present a problem; they have nothing to do with Configurator, and would never appear as sub-lines in OM. The problem arises in OM, which requires that any service item be "associated" to the item it's "servicing". OM does not automatically make such an association with service sub-lines, even though it might be argued that an association may be inferred by the BOM structure (i.e., OM does not assume that an optional service sub-line is necessarily associated, from a service standpoint, with its BOM parent). OM customization is therefore required in order to hook any service item up to its corresponding product item. Many customers who configure service along with product have implemented such a customization.
(Another gap in such a solution that may be relevant to you is that for an included optional service item requiring recurring billing, Order Management does not create the requisite Service Contract. Customers have likewise developed customizations to address this, as well.)
As this is not specifically a Configurator matter (you could have created your order without using Configurator at all, and you would have experienced the exact same behavior), please do not take my explanation as being either authoritative or comprehensive (I am a Configurator expert, and only knowledgeable enough about Order Management to be dangerous). It would be advisable for you to seek more detailed information/recommendations from the Order Management forum.
Eogan

SAP R/3 to External System RFC issue during Sales Order Processing

Hi Experts,
We have one Peculiar issue in our SAP R/3. Request you to help me in resolving this.
Order Processing:
During Sales Orders Processing, for every line item a RFC is being initiated from SAP R/3 to an external system called Trilogy Pricer to get the Pricing data.
Trilogy Pricer sends the Pricing data to SAP R/3 and the respective Orders are being processed in SAP R/3.
Current Issue:
The issue we are facing is that, once the Pricing data is sent to SAP R/3, Trilogy Pricer expects an acknowledgement (RFC_OK) from SAP R/3 in order to release the RFC connection. Intermittently, Trilogy Pricer is not receiving this or any kind of acknowledgement from SAP R/3 causing the connection to hang which is causing several problems.
For example:
On every business day, there will be 50,000 Sales orders.
So, 5 or 10 sales orders are getting hanged every day.
We tried to simulate this issue in Dev and Stage environments by processing 30,000 to 40,000 sales orders.
But we were unsuccessful, which means all the RFC connections were being closed as the external system is able to get the acknowledgements for all those orders from SAP R/3.
We are having this problem only in Prod.
Any thoughts to solve this issue is highly appreciated.
Advance thanks for your great help.
Thanks and Regards,
Srinivasa

Hi I am not sure if it was similar issue, but I once had a kindaa problem I solved using
CALL FUNCTION func STARTING NEW TASK task
[DESTINATION {dest}]
[{PERFORMING subr}|ON END OF TASK].

Statistic condition values not updated during Sales order Settlement

Hi,
In our client we have different Price condition types for based on scenario wise. Ex: Domestic Sales (ZPR1) and Export Sales ZPR2. I have maintained separately value fields for each price condition types.
We are booking some financial charges, and interest on working capital etc., this cost we need to transfer to COPA each Material wise based on sales revenue.
For this purpose we have created one COPA Assessment Cycle. Tracing factor is Sales Revenue and receiver is Materials.
In COPA Assessment cycle we can give only one base means ZPR1 related value field or ZPR2 related value field.
For this reason we have created one new statistic condition type, what is amount there in ZPR1 that amount will updated automatically in statistic condition place and so that we can give once one trance factor in COPA Assessment Cycle. We have assign this statistic condition all pricing procedure
Now my problem is in MTS scenario statistic condition values updated correctly. But in MTO scenario sales order settlement time statistic condition values not updated.
So is it possible update during sales order settlement time statistic condition values.
Please give me suggestion.
Regards,
Thiru

Hi Ajay Sir,
As you said is correct.
But in our client we have around 9 Plants and each plant manufacturing product are different. Client Requirement is in COPA Report they need see each product wise sales revenue. In this way we mapped product wise value field. System already mapped one guy in this way earlier. Now I am doing some changes for relevant to month end activities.
Some financial changes transfer to COPA each plant wise on Material. Here sender is cost center and receiver is Material. Base is Sales Revenue.
Please suggest me is there any alternative.
Regards,
Thirumalesh .

Product costing during sales order entry

Dear Experts,
Pricing Condition EK02 can calculate the actual cost during sales order entry. If the product costing will be activated for each and every order line item for calculating the actual cost EK02 automatically, does this have any down falls to the system performance or anything apart from this ?
Looking for the expert opinion in this regard.
Thanks
Anil

Hi Allan,
Ideally if the number of line items would be less than 10 during order entry. Do you think is there any impact because of the costing run for each and every line item ?
Looking for your response.
Thanks,
Sanjay

Error during Production Order Confirmation

I get a real wierd error during production Order confirmation. The error message is
"Additional items are not allowed
Message no. ZOAL010"
Can anyone throw some light on this?
Regards
Raj

it is not std SAP message.
you can check the user exit for confirmation.
check in transaction code CMOD/SMOD for CONF*

What table where i can find the errors in Sales Order

hi,
what table where i can find the errors in Sales Order. here's my situations, I need to create a abap report of CRM sales order not replicated to R/3 and show what's the error. I can't find the actual error in CRMD_ORDDERADM_H and CRMD_ORDERADM_I. I also tried calling program "CRM_ORDER_READ" but the program doesn't display/returns error's on header and item level.
please help.
earl g. faren

hi,
what i need is a table where i can find the sales transaction errors. I'm doing a abap report to list down sales transactions with error(s). I checked the table CRMD_ORDERADM_H and CRMD_ORDERADM_I but there's no field for transaction errors.
please help me find a table where I can link the tables above to get the specific errors for a sales transactions.
thanks alot.

Dump Error during Sales Order Craetion

Similar Messages

Maybe you are looking for