Dump problem while remote FM call

Hello Experts,
In R3 system there is a RFC Fm Z_SALESORDER_CREATE which is wrapper of standard FM SD_SALESDOCUMENT_CREATE. When we do remote call from CRM system for Z_SALESORDER_CREATE. Its given dump as follows:
Short text
    "Unable to interpret 2,00 as a number."
What happened?
    Error in the ABAP Application Program
The current ABAP program "Z_CREATE_ORDER_WITH_JOB_VRNT" had to be terminated
     because it has
    come across a statement that unfortunately cannot be executed.
The error occurred during an RFC call to another system.
    In the target system, a short dump has been written as well.
    More detailed information on the error cause can be found there.
Error analysis
    An error occurred when executing a REMOTE FUNCTION CALL.
    It was logged under the name "CONVT_NO_NUMBER"
    on the called page.
We are not using 2,00 anymore...it is something changed format while compiling..
It cause dump in R3 also..dump desc in r3 as follows
Unable to interpret " 2,00" as a number.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSTS4" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail bel
. The exception, which is assigned to the class 'CX_SY_CONVERSION_NO_NUMBER
was neither
caught nor passed along using a RAISING clause, in the procedure
"CONVERSION_EXIT_TSTRG_OUTPUT" "(FUNCTION)"
Since the caller of the procedure could not have expected this excepti
to occur, the running program was terminated.
The reason for the exception is:
The program attempted to interpret the value " 2,00" as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
How to correct the error
The exception must either be prevented, caught within the procedure
"CONVERSION_EXIT_TSTRG_OUTPUT"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Integers are represented in ABAP using a sequence of digits and, in so
cases, a preceding sign.
The system offers the following options for displaying floating point
numbers:
[sign][mantissa]E[sign][exponent]
[sign][whole number part].[fractional part]
e.g. -12E+34, +12E-34, 12E34, 12.34
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"CONVT_NO_NUMBER" CX_SY_CONVERSION_NO_NUMBERC
"SAPLSTS4" or "LSTS4U01"
"CONVERSION_EXIT_TSTRG_OUTPUT"
Please help me to solve ths problem as soon as possible..
thanks in advance for you quick response.
Anutosh

Hi
Check your defined data types which you are passing to FM and exact FM data types.
I hope that's the problem .
Regards,
Sree

Similar Messages

Problem while creating serivce call ..using bapi

Hi
I am trying to create a service call using a BAPI(BAPI_FLIGHT_GETLIST) as given in the example...
while creating the service call in the step Adapt Context i can see Airline Destination from ,Destination to and max rows,
i am not getting any choice to select dest from and to...
and when it is finished.. the node bapi_flights_getlist doesnt have any subnodes like cityfrom country from ... flight list.. as shown in the example...
Can anyone send me the screenshts of creating a service call specially the step Adapt context...to [email protected]
points will be given..
Regards,
Kiran

HI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar

Am having problem while making conference call

HElp me

Apple does not support downgrading of iOS. That will not be possible.
However, if you describe the issue that you are having with conference calls, maybe someone here can help.

Problem while calling an RFC Function Module in Background

Hello,
I have created a RFC function module for reading data from an external DB system. The FM calls an external RFC program (coded in C++ using RFC SDK), which delivers the required data. This external program is maintainged as an TCP RFC Connection in SM59.
Further I have created a report, that calls the RFC function module to get the data from the external RFC programm.
My problem is, when I call the report in foreground, everything works OK, the RFC connection works and data can be read from the external program.
However, when I schedule the report to run in background as a job, the report is stating in the protocoll that there was a problem calling the defined RFC connection (although the connection is working properly at that time).
More funny is, this particular problem with running in background occurs only in the productive system, in test and development system the report works correctly also while running as a job in background.
Can you suggest the solution to this problem? Could it be something with authorisations or server settings?
I will be on holiday for the next 6 weeks, so take your time to answer .
Regards,
Dusan.
Edited by: Julius Bussche on Jan 22, 2009 7:19 PM
Please read the forum rules about u r g e n t ...

This is an external RFC server program, not a remote enabled ABAP RFC function module as the others seem to be assuming, right?
Is it possible that your DEV and QAS systems only have one application server, but the PROD has many and dedicated one(s) for processing low priority background jobs?
It might be that the target server of your TCP connection is not this BTC instance, and your RFC server is returning the data "locally" - so, into nirvana...
Just guessing, but might be worth checking.
Cheers,
Julius

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

Connection problem while invoking remote method from client using oracle 8.1.6 server

while using a connection object to make connection to oracle in all remote methods(in EJB)only the first remote method called from the EJB client is getting invoked and the connection stops.It gives me COMM_FAILURE while invoking the second method in oracle 8.1.6.Help me out in this aspect immediately please.

r singh wrote:
>
I am getting "No Suitable Driver" exception from WebLogic 6.1 (sp1) at
the start up of the server.
My settings:
- WLS 6.1 on a solaris 8 machine and Oracle 8.1.6 on a WIN2K machine.
- I created the connection pool for oracle with the following
parameters:
connection name: OracleConnectionPool
url: jdbc.oracle.thin:@myOracleServer:1521:myDBName
driver class name: oracle.jdbc.driver.OracleDriver
properties: user=scott
password=tiger
- I have also downloaded classes12.zip and nls_charset12.zip from
Oracle.com
and have placed under $WL_HOME/lib.
- I have added $WL_HOME/lib/classes12.zip:$WL_HOME/lib/nls_charset12.zip
in
front of the $CLASSPATH in the startWeblogic.sh script. The echoed
classpath
from the startup script is:
/opt/tools/bea/wlserver6.1/lib/classes12.zip:/opt/tools/bea/wlserver6.1/lib/nls_
charset12.zip:/opt/tools/bea/wlserver6.1:/opt/tools/bea/wlserver6.1/lib/weblogic
_sp.jar:/opt/tools/bea/wlserver6.1/lib/weblogic.jar
- Still I get the error:
<Jan 16, 2002 1:38:45 PM EST> <Error> <JDBC> <Cannot startup
connection pool "Or
acleConnectionPool" No suitable driver>
Can somebody point me out if i am doing anything wrong here.
Thanks.
RamanandHi,
Sure. Your URL should be "jdbc:oracle:thin:@myOracleServer:1521:myDBName"
not "jdbc.oracle.thin:@myOracleServer:1521:myDBName"
Joe

Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found

We have a SOAP to PROXY scenario Which is in Production.
We keep getting the Error:
" Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found on host XXXXXX, ProgId =AI_RUNTIME_XXX.
We are using Standard Receiver Determination with single receiver without any condition. And no mapping being used in interface determination.
What are all the possible situation where we face such as this issue in Production.

Please check the SAP note
# 1706936 - messages fails with error java.lang.RuntimeException Bean SMPP_CALL_JAVA_RUNTIME3 not found
1944248 - PI unstable due to JCO_SYSTEM_FAILURE mapping issues

Iam using Iphone4,my problem is while imake a call or when ia attend a incoming call,the screen doesnt lock,while i kept in my ear to attend a call it automatically gets inside keypad or it on hold tab this makes me uncomfortable pls give a solution

Iam using Iphone4,my problem is while imake a call or when ia attend a incoming call,the screen doesnt lock,while i kept in my ear to attend a call it automatically gets inside keypad or it on hold tab this makes me uncomfortable pls give a solution

This sometimes happens if you have a case or screen protector on the phone. IF you have one of these remove it and see if it makes any difference

Problem with audio while making a call

I have a model 9810,
I can hear no audio while making a call at all, however, while making the call if I press the speaker tab I can hear (as like a hands free made)
I do not use a head set or in car kit, I just use it as a handset.
All other audio is OK, I can hear the alerts as a call or text comes in, but as soon as I answer the call and place it near my ear I hear nothing
Can someone please help
Thank you

Hello,
Questionz wrote:
I am having the exact same problem, I am not sure why, but my ear speaker is not working. I tried resetting, removing the battery, but nothing seems to be working.. Putting the call on speaker works, bluetooth works, only my ear speaker is not working.
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Questionz wrote:
I bought this from Blackberry store, is there any way I can give this in as warranty?
When you purchased, you should have received information as to how to seek support, warranty or otherwise.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problems with iPhone freezing when trying to answer while on another call?

I am wondering if others are having the problem with your iPhone freezing when you are on a call and another calls comes in. I have had this problem repeatedly. If I try to answer a call while on another call, the other caller can not hear me. when I try and hang up the call...iPhone freezes and disconnects ALL calls.
I do not have a problem if I initiate BOTH calls for a conference call. I am hoping that Apple is aware of this issue and are working on a fix in the next update. Whenever that will be???
Oh well, if you are having this problem and know how to fix it...please let me know. Thanks

I have noticed that during or at the end of a conference call when one party hangs up all parties have always been disconnected. I can tell you that if this is the way it works normally, this is not the way is should work. This is a pain in the butt when it is necessary to call one of the parties back since that party is also trying to call you back. You both get a busy signal.
I do not have a problem answering a second call during a time when I am on a first call. It will place the first call on hold and I will only be talking to the second party. It should work that way. My iPhone works that way.
It should also allow you to add the second call to the first call through the 'merge' feature so that both the first and second calls can be joined together. My iPhone works that way.
My previous Treo worked great on these situations but I do have burps with the iPhone.
I think that the problem is with the iPhone and AT&T interface in these conditions.
I would provide your comments to Apple via:
http://www.apple.com/feedback/iphone.html.

Locking Problem while calling BAPI

Hi ,
I am calling a BAPI in my wd appln . if there is some problem while executing the bapi like posting period not open then i am displaying the error of the BAPI . but after that i see in the locked tables through SM12 some tables gets locked .
so when i call the BAPI again it gives me error like the following tables are locked by the user... so is there any way by which i can release the locks hold by the bapi if problems occurs.
Regards
Yash

Hi Yash,
Try the command ROLLBACK WORK if the error occurs.
This will remove all locks set by the BAPI.
Regards,
Jos

Severe problem while starting Lenovo 3000 N200

Dear friends & experts,
I am using Lenovo 3000N200 0769BDG laptop. I have following problems while starting the system.
Recently my system was hacked against which I installed an Anti-Malware software. It showed that the system was free from any Malware.(But believe me, it is true that the system was hacked.). But each time on starting the system, a black and white window is being displayed which contains the following message:
We apologize for the inconvenience, but Windows didnot start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed , or if you aren't sure what caused the problem, choose Start Windows Normally.
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration (your most recent settings that worked)
Start Windows Normally
Use the up and down arrow keys to move the highlight to your choice.
Seconds until Windows starts:30.....1
After 30 seconds, the Windows logo is displayed immediately followed by a Blue screen which lasts for 1 second and the system restarts. I tried all the options listed above-- from Safe Mode to Start Windows Normally but the same problem recurrs. And the system doesn't shutdown until I press the power button.
I have a licensed version of Windows Xp SP3 as OS. I tried to repair the system using WinXP CD but I found the following message:
Setup did not find any hard disk drives installed in your computer.
Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.
Setup cannot continue. To quit Setup, press F3.
A point to be noted is that earlier, I removed the Rescue & Recovery from my system thinking that it might not be of much use and now, I lament for it.
When I press F3 the same window appeared and the same problem recurred.
I tried to access the files in my hard disk using Ubuntu CD and it was successful. I used Lenovo hardware quick test to check for any hardware faults, and my system passed all the tests.
I request you to help me in solving this problem so that I can continue my studies peacefully.
Thanking you,
With regards,
T.I. Kiran

First off, being "hacked" and having viruses/malware are two different things. Someone hacking your computer doesn't really mean you have a virus/malware, it means an actual person gained access to your computer remotely and did something to it.
More than likely you got a virus that corrupt your Windows System directory and/or registry. Anti-malware software won't necescarily detect all viruses, especially executable that run commands to simply delete files.
The blue screen you're seeing is what us technicians call the BSOD (blue screen of death), it's an indication that there is a direct corruption with the core files that Windows requires to function properly.
As an IT Technician, if this were one of my laptops or one of my end-users, I would simply reload it with a fresh copy of Windows XP. There's a possiblity that all data you had on the laptop is gone because if the Windows core files are corrupt/missing, then that could very well mean your system was wiped completely but the boot table is in tact, hence the fact that you even have the option to boot Windows XP.
One other option I would suggest is try to reinstall Windows XP. Sometimes if you have the right copy of the install, it will let you reinstall the Windows XP core files, leaving your programs, files and directories in tact.
Good luck.

Two remote objects calls on the same php class

Hi to all,
I've encountered a strange issue while developing with remote objects.
I've a mxml component with an init() method inside which is called by a menu.
When the init() method is called it makes 7 remote object calls which are bound to some components' dataprovider.
Among this calls I've got 2 remote object which refer to the same remote class. This because I have to call the class twice and the bind the result to two different combobox. Below you find the code:
<mx:RemoteObject id="myFile" source="myRemoteClass" destination="amfphp" showBusyCursor="true" makeObjectsBindable="true" fault="traceFault(event)"/>
<mx:RemoteObject id="myXls" source="myRemoteClass" destination="amfphp" showBusyCursor="true" makeObjectsBindable="true" fault="traceFault(event)"/>
in the init function I make this calls:
myFile.listDir("dir_1")
myXls.listDir("dir_2")
then in the mxml code I bound the result of myFile to combobox1 and the result of myXls on combobox2.
The problem arise when I call the myXls' listDir method. When I call it I receive the following error:
code:
Client.Error.DeliveryInDoubt
Message:
Channel disconnected
Detail:
Channel disconnected before an acknowledgement was received
The strange thing is that not only the myXls object returns this error, but also all the other 6 remote object return the same error above.
I'm not sure, but I guess that the error could be caused by the two remote object which call the same php remote class. If I comment one of the two calls everything works fine.
Do you have any suggestion about?
Thanks!!
Bye
Luke

Hi Jan.
1) We have the 2 VO, each with 3 rows to fill in data. What I mean is that when i just fill in all the fields for the first row of the first VO, and the value of one of these fields is bigger than 50, then after the exception is thrown and the message is displayed, the fields for the first VO are duplicated and shown in the second VO as if the user had inserted them.
2) We tried yesterday the validateEntity and a Method and Atributte Validator approaches after reading that white paper with the same results.
The validation is correctly done using any of the those methods.
I will try to reproduce this issue with the HR schema.
Thanks in advance once again.

Problem While Activating Transformation

Hi BW Gurus,
I am currently working on BW 7.0 on Purchasing Area, I found some problem while modifying the transformation or activating the transformation. I have mapped the data source 2LIS_02_SCL Purchasing Data (Schedule Line Level). I have written a routine for mapping rules of 0ORDER_VAL base on the source field of BWVORG, BWAPPLNM, BWEFFWR, BEDAT, WAERS, HWAER, WKURS. And it shows no error while syntax check. But while activating the Transformation it leads to dump. And after that if I try to change the routine, it leads me to the same dump.
Please advice.
For reference, find the code what I wrote in the routine below,
IF ( SOURCE_FIELDS-BWVORG = '001' or SOURCE_FIELDS-BWVORG = '011'
or SOURCE_FIELDS-BWVORG = '021' or SOURCE_FIELDS-BWVORG = '004'
or SOURCE_FIELDS-BWVORG = '014' or SOURCE_FIELDS-BWVORG = '024' )
AND SOURCE_FIELDS-BWAPPLNM EQ 'MM'
AND SOURCE_FIELDS-BWEFFWR 0.
   PERFORM LOC_CURR_CONVERT
           USING    SOURCE_FIELDS-BWEFFWR
                    SOURCE_FIELDS-BEDAT
                    SOURCE_FIELDS-WAERS
                    SOURCE_FIELDS-HWAER
                    SOURCE_FIELDS-WKURS
           CHANGING RESULT.
ENDIF.
where the LOC_CURR_CONVERT is given below
      FORM LOC_CURR_CONVERT                                         *
--> LC_DOCUMENT_VALUE                                             *
--> LC_DATE                                                       *
--> LC_DOCUMENT_CURRENCY                                          *
--> LC_LOCAL_CURRENCYY                                            *
--> LC_RATE                                                       *
   LC_LOCAL_VALUE                                                *
FORM loc_curr_convert
USING    lc_document_value
           lc_date
           lc_document_currency
           value(lc_local_currency)
           lc_rate
CHANGING lc_local_value.
conversion of lc_rate from floating-point to decimal. Necessary for *
call of CONVERT_TO_LOCAL_CURRENCY.
data lc_rate_dec type p decimals 5.
lc_rate_dec = lc_rate.
IF lc_document_currency = lc_local_currency
no conversion necessary -> Main case 1
    AND NOT ( lc_document_currency IS INITIAL
           OR lc_local_currency IS INITIAL ) .
    lc_local_value = lc_document_value.
ELSEIF NOT ( lc_document_currency IS INITIAL
OR lc_local_currency IS INITIAL OR lc_date IS INITIAL ) .
conversion necessary with lc_date -> Normally not possible
    CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
      EXPORTING
        date                 = lc_date
        foreign_amount       = lc_document_value
        foreign_currency     = lc_document_currency
        local_currency       = lc_local_currency
        rate                 = lc_rate_dec
      IMPORTING
      EXCHANGE_RATE        =
        local_amount         = lc_local_value
      EXCEPTIONS
        NO_RATE_FOUND        = 1
        OVERFLOW             = 2
        NO_FACTORS_FOUND     = 3
        NO_SPREAD_FOUND      = 4
        DERIVED_2_TIMES      = 5.
    IF sy-subrc NE 0.
message a802 with lc_date lc_document_currency lc_local_currency
                    sy-subrc.
    ENDIF.
ELSE.
if conversion not possible -> assign target values
    lc_local_value = lc_document_value.
    lc_local_currency = lc_document_currency.
ENDIF.
ENDFORM.
Thnaks
Regards,
Deep.

Hi,
Please check routine if any for 0CO_REPLINE and also expert routine.
Regards,
Rema.

Dump problem while remote FM call

Similar Messages

Maybe you are looking for