Duplex printing problem with access method G

Dear all,
We have Canon GP300-405 PS Ver 1.0 printer.
Previously, with access method F: Printing on front end computer, we were able to do duplex printing.
Now we have changed the the access method to G: Front End Printing with Control Tech and we are not able to do duplex printing
We have ECC 6.0 / AIX / Oracle
I installed SAPGUI patch 17 but still I am not able to do duplex printing
Any suggestion?
Rgds..../

Sandy,
This note will answer your query
Note 1149136 - Options for front-end printing (access method G)
Character string: "DcMode" [printer-specific]
Default: 0x0800
Other values: (Nearly) all, see below
Effect:
This parameter determines WHEN to send the control of
a) orientation portrait/landscape
b) paper size
c) duplex
d) tray
You need to set above mentioned parameters.
Regards,

Similar Messages

Duplex printing problem with Reader Upgrade

I upgraded Acrobat Reader 10.1.8 to 11.0.4 and can no longer access fast or duplex printing for PDF's. I have a Canon MP970 printer for 3 years and have always been able to do both fast printing and duplex printing of PDF's.
How do I resolve?

I have an identical issue to neuegestaltung, but with an HP 5500. I can print single-sided to A3/tabloid successfully but when I try printing duplex the right quarter of the page is cut off on both sides - almost as if it thinks it's printing portrait.
Applications affected include Adobe Acrobat 8 and 9, Adobe CS3 and CS4 applications including InDesign.
Preview works fine, but of course the colour balance makes the output unusable.
OS 10.6.2, print driver HP Color LaserJet 5500 v 3010.107.
Using the Gutenprint driver I can't either do A3 or colour so there is no solution there.
Worked fully and correctly with the same apps under 10.5.x.
At the moment I am running Windows XP under VMWare to print from Acrobat, which is plainly silly.
Any useful* observations, suggestions or workarounds welcome.
*Needless to say, "It's Adobe's problem" or similar are not acceptable responses. It may well be an interaction between the Adobe's applications and Apple's printing system and/or driver of course; in that case the companies need to collaborate to solve the issue.

Duplex printing problem with hp 9500 (right side always just half printed)

Since OS X 10.6 was released there is a problem with the print out of duplex printed pages (specially via Indesign CS4 broschure printing function). Using Mac OS X 10.5.8 with old and new driver everything is fine - but under 10.6, 10.6.1 or 10.6.2 neither old nor one of the new driver releases 2.1, 2.2 or 2.3 will work.
When I´m trying to print a duplex printing page the print of the right page will be cutted off at the half of the page - like the page would not print A3 horizontally but vertically (so the rest is cut off). The new print features within the printing menu (manual duplex print and print broschure will have same effect but with a strange miniaturization to A5 - although it should be A4). All in all the is no way to print out a duplex printing with OS X 10.6 and hp 9500. Will there be any solution in sight? Are there other with the same effect?

I have an identical issue to neuegestaltung, but with an HP 5500. I can print single-sided to A3/tabloid successfully but when I try printing duplex the right quarter of the page is cut off on both sides - almost as if it thinks it's printing portrait.
Applications affected include Adobe Acrobat 8 and 9, Adobe CS3 and CS4 applications including InDesign.
Preview works fine, but of course the colour balance makes the output unusable.
OS 10.6.2, print driver HP Color LaserJet 5500 v 3010.107.
Using the Gutenprint driver I can't either do A3 or colour so there is no solution there.
Worked fully and correctly with the same apps under 10.5.x.
At the moment I am running Windows XP under VMWare to print from Acrobat, which is plainly silly.
Any useful* observations, suggestions or workarounds welcome.
*Needless to say, "It's Adobe's problem" or similar are not acceptable responses. It may well be an interaction between the Adobe's applications and Apple's printing system and/or driver of course; in that case the companies need to collaborate to solve the issue.

Strange duplex printing problem with AR 9.1.3

Hi. I recently upgraded my acroread to 9.1.3 (archive.canonical.com in Ubuntu Hardy).
Since I did it, I've got this odd behaviour:
- I can print at single side with acroread 9.1.3
- I can not print with duplex option. It states the job as "retained" on the printer status. And the command it is using says:
lpr -P Epson_ALC1100 -o PageSize=a4 -o PageRegion=a4 -o MediaType=normal -o Color=color -o Duplex=DuplexNoTumble -o Duplex=DuplexNoTumble -o TonerSave=false -o Resolution=300dpi -o InputSlot=autoselection -o Collate=on -o Copies=1
- If I use this command with the "Custom..." option... I've got the same result: the job is "retained"
- I was able to print two sided in the same printer with version 8.x
- But, if I use this command straight on a terminal... let's say:
foo@computer: lpr -P Epson_ALC1100 -o PageSize=a4 -o PageRegion=a4 -o MediaType=normal -o Color=color -o Duplex=DuplexNoTumble -o Duplex=DuplexNoTumble -o TonerSave=false -o Resolution=300dpi -o InputSlot=autoselection -o Collate=on -o Copies=1 foo.pdf
Then prints with out problems....
- I can also print two sided with the visor evince.
Can anyone help me? I'm the only one with this problem?
I did reproduce the trouble in the computer of my advisor (same printer, same ubuntu distribution).

Hi,
Did you try printing the ps file using the same command.
First create a ps file using the "print to file" otion to create a ps file.
Next use the same command to send the ps file to the printer with Duplex On.
Also, did you try printing to a different printer.
With A9, the Printer properties dialog box has changed to accomodate all the settings that the ppd file provides.
So make sure that the Duplex is selected in the properties box.
You can also set the default Duplex option to "DuplexNoTumble" or "Long Edge Binding" in the CUPS Web UI for the printer and then print to the printer.
Regards,
Rishi

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Duplex Printing Problem - Word 2007, Vista and HP Officejet Pro L7780

I'm having trouble with duplex printing on my new HP Officejet Pro L7780, from Word 2007, running on a brand new Vista system. I've also had this same problem (repeatable) with two other computers, running XP Professional/Word 2003, XP Home/Word 2003. All of the service packs have been installed for the operating system, word, and printer.
If you print a landscape document, using the auto duplex setting for the HP printer, the margins will print out offset by .25 inches, on the left and rigt margins. So if your margin is 1 inches on right and left, the margins will print to .75 on one side and 1.25 on the other. This would be annoying, except that I'm trying to print brochures and books, which requires that the pages print out exactly as set up... "close enough" isn't working for me
The way I have replicated this problem is as follows: set up a document in landscape format, using the default margins. Insert an image on page one, size it so it takes the full margin area. On the second page, fill it up with text. Print the document, selecting the printer properties and setting Print on Both Sides=Automatic. The easiest way see the problem is by holding the document up to the light. The front and back margins should match and they don't.
Any help you can provide would be very much appreciated.
Diana

Diana,
This problem is perhaps much larger than you might have imagined. We have tried to work with Hewlett Packard for over two years on the duplex printing problems. In the process, we have expended over 100 hours of effort in troubleshooting the problem which has included updating software, reinstalling software, developing test documents, escalating issues, submitting technical findings, and in purchasing replacements. Unfortunately, our efforts to interact with Hewlett Packard excalated support have resulted in an aire of apathy, disinterest, incompetence, frustration, redundancy, occasional discourtesy, and an outright lack of professional decorum - something inconceivable of a large, reputable company.
We have identified several problems with duplex printing. The duplex printing problems include irregular margin increases (.25 to .50 inch), margin shifts, cut-off text, compressed text, and compressed graphics. Please note that most of these problems are only evident when printing documents from computer applications to the printer. If the user simply uses the front printer panel to copy in duplex mode, these problems are not always evident. This suggests that the printer mechanics are capable of properly duplexing and that the problem lies in the drivers.
The problem is evident on the HP OfficeJet Pro L7780, Photosmart L7180, Photosmart C6150, Photosmart 3310, and likely on many, many other HP models. The problem is evident on many computers (HP, IBM, Toshiba, and Dell), is evident in multiple applicatons (Word, Wordperfect, Excel, Peachtree, Notepad, and many more), and is evident on multiple operating systems (Windows XP Home, Windows XP Professional, Windows XP Media Center Edition, and Microsoft Vista).
We consider ourselves to be extremely polite, patient individuals, but have nearly been driven to outrage by the indignant disregard offered us by HP's escalation support department; a department which should represent the cream-of-the-crop in both service and technical expertise. Given the ease with which the problem can be duplicated, we expected an extremely quick resolution by HP who, to our knowledge, has never even made the effort to duplicate the problem in-house on our behalf.
Ironically, HP highly advertises their J.D. Powers rated technical support, yet it appears that they actually have extremely poor published consumer rankings in some of today's mainstream computer magazines. HP technical support makes no apologies for the fact the user cannot use a major feature of their printers, offers no indication that the problem is even being addressed, and off-loads the responsibility by suggesting that we contact Microsoft (who is to blame for this issue).
Thank you, Diane, for your message. We had a hard time imagining that we were the only one experiencing this problem, especially when HP promotes such a representation. Which also begs the question why HP plays like the problem does not even exist? I also fail to understand why HP technical support shows so little interest in a problem that is easily duplicated and adversely affects a major feature of the printer which is commonly used by individuals purchasing equipment for its duplex capabilities.
This is sad because we have been a loyal customer of HP for over twenty-five years. There was a time when we would have happily endorsed HP's steller products and steller support (provided you could get a problem escalated). Now, however, they all-too-often appear to offer equipment that fails to support advertised features which is backed up by sub-standard support and extremely expensive ink. This is an especially sad commentary for users who are buying HP's upper-end printers and computers.
We desire to know if there are others out there experiencing similar problems? If you have experienced these problems or would like samples of the problems we have duplicated, please respond. I think the more information we gather, the better our chance of a successful resolution to a serious problem.
Thanks Everyone!

Problem with Access Policies (create multiple resources)

I'm having a problem with Access Policies:
The first policy must create a resource.
And the following policies should create childs on the resource.
The problem here is that when policies will add the childs, the resource is not provisioned yet.
And then each one will create a resource but i just want one resource with the childs.
When the resource is already provisioned, the policies update this resource properly.
How can I fix this?
tks

Ricardo,
I had a similar problem. In a post-process handler I was managing the user membership in specific roles through the removeMemberUser and the addMemberUser of the tcGroupOperationsIntf class.
The last parameter of this method was a boolean which, when true, would automatically trigger the access policies programmatically in the post-process.
The problem is that there also is an OOTB event handler for triggering access policies, so I was basically triggering the access policies twice and duplicated resources were appearing.
Hope this helps.
Cheers

Duplex printing issues with landscape orientation

I have read through all of the previous questions, and can't seem to resolve my problem here.
I am using Acrobat 8 Professional (8.2.2). I have created a PDF from a Powerpoint presentation. I need to be able to send this to someone else and have them view it on screen with the correct orientation, and also duplex print it correctly, as all of our company printers default to duplex printing (to save paper). However, since the person who prints it is going to staple it in the upper left hand corner, it really needs to be duplexed to open along the left edge (the short edge of the paper).
When I first bring up the print screen the document has the incorrect orientation; i.e. it shows a thumbnail of an 8.5 x 11" page in portrait orientation, and my content is reduced in size to fit the 8.5 width. I think this is really the issue at hand--for some reason, even though the page is set up in Powerpoint as a 8.5x11 landscape oriented document, when it exports to the PDF format, that orientation doesn't hold.
Anyway, it seems that no matter what settings I try to adjust, it doesn't seem to work. I have toggled "Auto-Rotate and Center," I have toggled the duplex settings in the PDF document properties. I have toggled the duplex print settings on my printer driver between "Open to Left" and "Open to Top." None of it seems to make any difference in the final printout--basically what comes out of my printer is a document that is rotated to print out as if it was a portrait page, and is bound on the left edge (so each second page is printed upside down, when I am looking at it in landscape orientation).
The only work-arounds I can think of would be to rotate every other page in the PDF so that when it printed it printed correctly. However, then the PDF would not be readable on the screen. I could generate two separate versions of the PDF, one marked for print, and the other for viewing--but that is a real waste.
Does anyone have any suggestions here? I am looking for a way either to get the PDF software to "understand" that this document is a landscape document from the get-go (then it SHOULD work to duplex print correctly with the "Open to Left" setting), or maybe create a custom print setting for this document that allows me to rotate every other page as it is printed, but that doesn't rotate the pages on the screen.
I hope this is all clear...and that someone can offer some advice.
Thanks!
Melise
P.S. Just in case it makes any difference, I am running Windows XP Professional and am using the Microsoft Office 2007 software package. Because the company has multiple different printers throughout the company, I need a solution that will work without regards to the specific printer driver.

I am having the exact same issue. The setting of "Auto-Rotate and Center" has no affect.
Do I have to rotate the odd pages 180 so they are upside down in the PDF, but print correctly?
I am using Acrobat 9 Pro V. 9.3.3 in Win 7 Pro 64, to HP CP6015XH (colour laser).

Printing problems with hp laserjet 1018

- printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
- hp photosmart premium c309 works with all file types
Windows 7 64 bit
Adobe Acrobat Pro 10.1.7
Acrobat Reader 11.0.3

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Printing problems with InDesign CS3 running on OS 10.6

I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Printing problem with Summarize Comments?

Printing problem with Summarize Comments in Pro 10.1.6? When I print, I only get the number boxes on one page and the comments on the next page. The numbered boxes don't show up on the actual image itself.

Um I dont know if im doing something daft but I tried this like you said
PrinterJob printJob = PrinterJob.getPrinterJob();
printJob.setPrintable(this);
if(printJob.printDialog()){
try {
          PageFormat pageFormat = printJob.defaultPage();
          if (pageFormat.getOrientation() == PageFormat.PORTRAIT) {
          landscape = 0;} else {
               landscape = 1;}
          System.out.println("THE ORIENTATION IS "+ landscape);
          printJob.print(); }
catch (Exception PrinterExeption) { PrinterExeption.printStackTrace();}
and it doesnt seem to work as I tried it both as landscape and portrait in the print dialog but landscape is always 0.
cheers
pmiggy

Printer problem with AW 6.2.9

I have a recurring printer problem with both hp deskjet 5150 and Epson R220. After much work with techs at both, we have determined that it is an AW problem (v. 6.2.9) Other files print okay. I've searched through recent posts and found similiar questions, but the answers aren't specific to my problem. I gather that it involves trashing certain AW files, such as Appleworks.plist and other Appleworks prefs. It will help it I know the specific files to trash and as much detail about how to find them on the HD. I will be infinitely grateful for any help.
OSR
Mac G4 Mac OS X (10.4.6)
Mac G4 Mac OS X (10.4.6)

Welcome to Apple Discussions
You are correct that deleting the AppleWorks preferences can fix some printing problems. I'm surprised that in finding that information you didn't come across a post with the specific information or a tip to my user tip, AppleWorks has stopped working correctly, that explains which preference files ot delete.
Make sure you have the newest printer driver for each printer. Also, use Disk Utility to repair permissions after any system update or upgrade.

Printing Problems with PDF - Adobe Acrobat

Printer - HP Deskjet 3070A
Laptop - Asus Zenbook running Windows 7 Home Premium
Issue: Printing problems with PDF (Adobe Acrobat Reader)
Dear All,
Please help!
My printer was working absolutely perfectly until my brother in law recently needed to borrow my printer. He plugged in his laptop running Windows 8 (awful thing that is). Since he did this to print his own PDF, I cannot print mine.
Although all the text will appear on the page perfectly both in the document view and on actual printing, it appears that some of the transparent formatting stuff on a PDF - such as boxes you have to fill in and transparent areas (such as you find on glorious tax forms) are omitted completely. In fact, in their place I was getting a single black dot. Now, after uninstalling and re-installing updates for the printer, windows 7, adobe acrobat reader, etc.etc. I get squat. Just all the text laid out but none of the shading or boxes.
I have tried fiddling with the printer settings; the print as 'photo' option, dpi settings, greyscale - as much as I can think of and I am thoroughly stumped.
In a desperate attempt, I even installed the Universal Printer Drivers - thinking it might have been that. No. All I got was a page of gobbledygook. Consequently, I uninstalled and reinstalled the normal drivers again.
If there are any wonderful people out there with any fabulous ideas about how I can get my shading and boxes back; I'd very much appreciate it. Sadly I have a tax return to fill out (which is already fabulously late) and need my printer to work!
Much appreciation in advance x

Hey there @Reverie!
Thanks for posting on the HP Forums!
I can see that the printer is no longer printing in the correct format after it was plugged into the Windows 8 computer! You mentioned you have run the updates and uninstalled/re-installed the printer software. Have you uninstalled and re-installed the Adobe software? Are you getting the same issue from other programs as well? Are you getting the same issues if you are logged in as a different user on the computer?
I have located the HP Update Software Utility that may be able to help. You can download an run the utility. It may be able to locate any other updates for the printer.
I would also recommend running a disk cleanup on the computer to clear any temporary files and junk files that may be causing some performance or software issues. If you do not know how to run a disk cleanup on the computer please follow this document regarding Delete files using Disk Cleanup. It is recommended to restart the computer after a disk cleanup. After the restart try the print job again!
Let me know if that helped and thanks again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Problem with access to SMTP, IMAP, POP3 protocols in CAS 2013.

Hi,
we have problem with access thgrough SMTP, IMAP, POP3 protocols in CAS 2013.
If I test connection to SMTP 25 port from other computer, session end quickly.
Test from CAS2013 to localhost or public IP is OK (similar also for IMAP and POP3).
Receive connectors are with defaults settings, firewall is disabled.
Service Microsoft Frontend Transport Services restarted, but no success.
Certificate is assigned to IMAP, POP3, SMTP, IIS.
IIS and HTTP(s), protocols are OK. Clients can connects only thgrough web, mobile (ActiveSync), or with Outlook with proxy.
Do you have some tip, what to test?
If I create new testing receive connector on port 26 for anonymous, behaviour is same, quick disconnecting.
Thank's Mirek

Hi,
Pleaser try to use the following link to test your STMP/POP/IMAP e-mail, and check the test if successful:
https://testconnectivity.microsoft.com/
If unsuccessful, please check the test result, it will tell us what caused the problem.
Thanks.
Niko Cheng
TechNet Community Support

I have problem with pay method

I have problem with pay method. My card declined. I change card and I have the same problem. What can i do? Why declined my card again?

Contact iTunes store support: https://ssl.apple.com/emea/support/itunes/contact.html.

Duplex printing problem with access method G

Similar Messages

Maybe you are looking for