Duplicate check on search term for BP creation in CRM

HI,
I want to do a duplicate check on search term for BP creation in CRM.
i found one BADI ADDRESS_SEARCH. But the method address_search is not getting called.
Is there any other BADI available? how can I handle this issue?

hello,
BP is BDT (Business Data toolset) enabled (you can check it by adding break point in FM BUS_PBO and executing BP transaction). You can add your check directly to standard view (the check will be executed each time when user pushes enter) or you could add you check to appropriate action (during saving etc.) there are number of actions which you could use it depends on your requirements. You can find a lot of info about BDT (if you are not familiar) in Wiki.
br,
dez_

Similar Messages

What character splits search terms (for different search result tabs), searching from the search box.

When we type in a search term, in the search box, the results can be shown in a tab. But how can you split search terms while entering them all at once, each search term providing results in a new tab.
"Search Term|Search Term Two", using |;\ etc only sends the term in entirety beyond. What does this box handle and how to make it open two tabs when given two separated search terms.
So what is this special character or setting?
Thank You

Thank u so Bruce , I finally found an answer to my question.
The solution u provided looks complete except that i am confused by the meaning of strField , may i didnt provide more details in my post .
The strField var i provided earlier was not meant to be placed in my code , the correct one is shown below .However , the strField means according to me is the field against which the search operation should take place based on the ( search Term )
the user provided .
Here is the code after applying the solution u suggested :
'Information collected from the user
strWhereToSearch = IIf(.framSearchIn.Value = 1, "[quknotSubject]", "[quknotBody] ")
strCondition = strWhereToSearch & " Like '* " & strTextSearch & " *' OR " & _
strWhereToSearch & " Like '" & strTextSearch & " *' OR " & _
strWhereToSearch & "Like '* " & strTextSearch & "'"
'Fill result search Recordset
strSql = " Select * from qryExtraTool_QuickNoteSubCatMainCat   "
strSql = strSql & " WHERE   " & strCondition & " ORDER BY quknotDate"
'Control Source for the text box to display matches. ( Highlight the search word )
txtQuickNoteBody = SearchHilight(strWhereToSearch, strTextSearch)
Tell me if my implementation to your code is right ?
Thank u again Bruce ...

Suggest a thread or search term for me...

I'm a total NOOB with X-Code, but today I was able to successfully create an installation package using PackageMaker's assistant. Way too easy.
The path to which I want to copies files is actually WITHIN the new iWeb application:
...../iWeb.app/Conents/Resources/Frames/
Because not everyone has their applications installed to /Applications/ I want the installer to "find" iWeb.app by itself and install to the path I specify beyond that. I just don't know how to specify this in path format...
Is there a good thread for this or can someone suggest a search term. The search functionality for these forums is pretty weak.
Thanks - Suzanne

I'm a total NOOB with X-Code, but today I was able to successfully create an installation package using PackageMaker's assistant. Way too easy.
The path to which I want to copies files is actually WITHIN the new iWeb application:
...../iWeb.app/Conents/Resources/Frames/
Because not everyone has their applications installed to /Applications/ I want the installer to "find" iWeb.app by itself and install to the path I specify beyond that. I just don't know how to specify this in path format...
Is there a good thread for this or can someone suggest a search term. The search functionality for these forums is pretty weak.
Thanks - Suzanne

How do i put in keyword search terms for Google in iWeb

Does anyone know how to put keyword (search term) into my existing webpage for Google?

This might be of interest to you: Official Google Webmaster Central Blog: Google does not use the keywords meta tag in web ranking.
That being said use iWeb SEO to add metadata, page and site descriptions, title tags, etc., to an iWeb page, either after publishing to MobileMe or after publishing to a folder on the hard drive.
More information on getting Google to recognize your site can be found here: Get your iWeb website found in search engines like Google Yahoo MSN and Bing.
OT

TREX: List of search Terms for Index

Hi together,
I have the following problem:
I have created an index and would like to know for which search terms can be searched.
Is there a possibilty to get the file with the of search terms?
best regards,
Birgit

Hi Birgit,
try the following rather new note (937055) for TREX 6.1:
https://notescsr.wdf.sap.corp/~form/handler?_APP=01100107900000000342&_EVENT=DISPL_TXT&_NNUM=0000937055
Among other things, the contained script will help you find out the search terms that reach the engine most frequently.
<b>Note:</b> The script works on engine level. If results have been cached before on KM level, they may not be counted.
To get all terms in an index, I'd advise you to contact SAP support, as might have to evaluate an index dump or somehow get to the TREX term store - both might not be advisable to just "try at home".
Regards,
Karsten

BAdI: or User Exit for Campaign Creation IN CRM 5.0

Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
Ganesh

IN WHICH TRANSACTION U R CREATING CAMPAIGN ??

Duplicate check via BAS (ADDRESS_SEARCH)-- how to handle non-crm customer?

Dear all,
I'm implementing a duplicate check and using the BADI Address_search. Within this BADI I use the method "Address_Search" for calling a third party software tool with customer information. This tool checks whether the entered customer is already available in CRM AND in other system in our company holding.
The method provides me a list of all found duplicates (incl. non-crm customers)
My problem is that I need to fill a export table "ex_t_search_result" (type adkey_indx_tab) of this method which expects ADRC number. For the CRM customer it is not a problem. I can figure them out by table BUT020 and the customer number. But for the non-crm customer I do not have a ADRC number.
I know there are some methods for creating addresses in BAS (function group SZA0), but actually Im not sure how to handle them.
Does anybody of you had faced a similar issue?
Thanks for your help
Firat C.

hello,
BP is BDT (Business Data toolset) enabled (you can check it by adding break point in FM BUS_PBO and executing BP transaction). You can add your check directly to standard view (the check will be executed each time when user pushes enter) or you could add you check to appropriate action (during saving etc.) there are number of actions which you could use it depends on your requirements. You can find a lot of info about BDT (if you are not familiar) in Wiki.
br,
dez_

Raw Search Terms for "Spotlight Comment" and "Locked" Status

Is it possible to do a raw search for a specific Spotlight Comment. I know the option exists in the Other… dialog box, but I need to find files that do not contain comments which is not choice.
Also, is there any way to find only files that are unlocked?

If you go to Others and select Raw Query you can use it find items with a specific comment, and items without any comment. For example, if you have the comment "testme" in the Spotlight field you would paste this into the Raw Query field:
kMDItemFinderComment == "testme"
and all files with that comment would be found. To find files in a folder that contain NO comment at all, you would use this:
kMDItemFinderComment != "*"
Be warned though: when I tried this on a folder with only 5 items in it, 4 with comments and one without. it worked, returning the lone uncommented file, but it took an amazingly long time to do so (perhaps a minute, while the search for "testme" was instantaneous).
The "File readable" and "File writeable" functions shown in Others, which presumably are what one would use to find locked files, simply do not work. This is not surprising since the information about whether a file is locked or not does not in fact appear in a file's metadata. I guess that will be a future addition. You can use find in Terminal to search for files that are locked/unlocked. Let me know if you really want to do this.
Francine
Francine
Schwieder

Step for Ibase creation in CRM 7.0 using equipments from ECC 6.0

Hi all,
I would request you guys to share the steps which I need to follow for the download of equipments from ECC to CRM 7.0 and automatic creation of Ibase with equiqment as Indivdual object and with details like partner etc.
I would be happy if you guys canb share any document with steps.
Regards
BABU

Hi,
Refer the following to get the understanding the Equipment download to CRM.
You define the default settings for replicating equipment in the IMG activity: Customer Relationship
Management -> Master Data -> Installed Base -> Replication of Equipment from SAP R/3 Customer
Service -> Define Default Settings for the Equipment Replication.
For more information about the integration of different systems, see the SAP Library under mySAP
Customer Relationship Management -> Architecture and Technology -> Business Integration -> CRM
Middleware.
The Business Add-In : Business Add-In: Equipment Upload (CRM_EQUI_LOAD) can be used to
flexibly enhance the data transfer and validation in SAP CRM. The Add-In offers comprehensive options
for influencing the mapping between equipment and individual objects
Also refer to the following notes:
1. Note 627279 - Serial number & configuration download
2. Note 637173 - Equipment download/delta synchronization
Hope it helps.
Regards,
Rajiv

Need standard techniques for address duplicate checks.

Hi ,
I need to use sap standard techniques for standardization and duplicate check.
I have checked the bogs
Show Duplicates Button on Accounts View
Duplicate check for Business Partner
I have checked ,BUT000 index is active customizing table TSADRVGRPC.
But still show duplicate button ,no pop up is triggered.
Checked
IMG => SAP NetWeaver => Application Server => Basis Services => Address Management => Duplicate Check
BUT000 PARTNER index active 90,0 SAP Business Partner
BUT052 ADDRNUMBE index active Contact Person Relationships (SAP Business Partners)
are maintained.
Still i need to implement BUPA_ADDR_CHECK ?
or any other BADI's ?
Thanks,
Anitha.

Hi Ani,
In order to have duplicate check activated in your system, you would need a TREX server and an RFC created between CRM and TREX. Once its in place follow steps:
1. Goto SPRO->SAP NETWeaver->Application Server->Basis Services->Address Management->Duplicate check
Here maintain limit for duplicates. Say if you maintain 70 here then only partners above similarity of 70% would be shown as duplicates.
2. Activate Badis Address_search and address_update. If you dont want to activate these badis then create custom implementation of them.
3. Go to t code SES_ADMIN.
Here go to->customizing->system settings and give details like name of RFC connetion between crm and TREX server and then search engine as CL_COM_SE_TREX.
come back and again in customizing->business addresses and indexes, create business object named BAS_BUPA with class CL_IC_INDEX_SES. Once you create this entry go to settings subnode and maintain object type as 1.
Now come back to Ses_admin main screen and from top menu select index->create/activate indexes. Here select bas_bupa.
4. Click on index immediately.
5. Run report SIC_BAS_RSADRINI.
See the magic of TREX...Duplicate check would start working...
Now for standardization you can do it directly from SAP except for postal code, region, country but not for free text like street address, house number(Functional consultant can do it in SPRO). If you need this functionality then you need to have interface with third party system.
Hope that helps,
Regards,
BJ

Website search term code

I have a website with a search field that uses some basic sql
to search the
web database.
For marketing purposes and to understand our customer better,
we want to
learn what our customers are searching for on our website.
Whats the best way do you think to achieve this?
I could write each and every search term into a database?
(cumbersome and
database table would grow out of control)
OR
I could put the search term and pass it as a url variable in
the url
string. Then i could view google analytics and view the more
popular url
strings. eg: www.xxxx.com/search.cfm?search=hard hats (bit
clunky)
Can anyone suggest a better way of doing this?

why not use a database?
handling huge amounts of data is what they're for , right?
you could keep it cleaner by going relational - just a
thought
when somebody enters a search, check the 'search terms'
table... if it
does not already exist, insert it.
then, add a record to the 'searches run' table, with the ID
of the term
and the date, whatever other info you want.
a simple query can pull all terms and a count of searches run
for that
term's ID, or a list of dates, whatever... i think that's how
I'd
approach it, if nothing better turns up...
Michael Evangelista, Evangelista Design
Web : www.mredesign.com Blog : www.miuaiga.com
Developer Newsgroups: news://forums.mredesign.com

Temporarily disabling Duplicate Check

All,
We're in the middle of DEMO's for our CRM 7 project in QA. Currently when we create a new customer via the Web UI, we get a long response time. After doing some analysis I noticed that when the save function is executed in the Web UI, the program /FLDQ/SAPLAD_DUPL_CHECK_SEARCH is launched in DIALOG and runs for a long-long time. It will eventually complete, but in some instances it times out.
We've elected to go with BOBJ-DQM for duplicate searches, etc, instead of using TREX. However, the DQM functionality only exists in our DEV system, not in QAS yet (long story why). In order to set an appropirate user expectation, we'd like to disable the duplicate checks in QAS temporarily while we get DQM-QA going; just for DEMO purposes. Does any one know how to do this? To me, it seems this would be configuration somewhere, by the functional guys are looking to me (BASIS) to help them out.
Any suggestions would be appreciated.
Thanks in advance,
Jose

Hi.
To deactivate duplicate check go to spro>sap netweaver>application server>basis services>adress management>duplicate check.
There choose customazing option Activate Duplicate Check and Determine Limit for BAPIs and uncheck index for BUT000.
Regards.

Search term search

Hi All,
Is anyoneaware of any FM which gives me the search term for the BP.
Thanks and regards
Vijay Saha

Hi Vijay,
Please use the FM BUP_CHECK_SEARCHTERM or else select it from BUT000 table.
Regards
Sidd

Business Partner Duplicate Check - Threshold Configuration

Hi,
I had setup the duplicate check for Business Partner in CRM system.
In SPRO -> SAP NetWeaver -> Application Server -> Basis Services- > Address Management -> Duplicate Check -> Activate Duplicate Check and Determine Limit for BAPIs, I understand the "Threshold BAPIs" is the percentage that determine which duplicate business partner similarity to be display in the Dialog Box.
E.g: If I set 80 in this box, then only business partner with similarity greater than or equal to 80% will display in the dialog box.
But, in SPRO -> SAP NetWeaver -> Application Server -> Basis Services- > Address Management -> Duplicate Check -> Set Limit for Duplicate List in SAP Dialog Boxes, I don't understand the value in "Threshold SAP Dialog Box" is configure for. The value that I had setup in here make no difference for me.
Does anyone understand how this threshold works in duplicate check? If yes, kindly please provide me an example for better understanding.
Thank you.
Regards,
Edison Wang

Hi,
Anyone that have experiences in BP Duplicate check, can help?
Thanks
Regards,
Edison

Font features of search term

Hi, I need to get font size, word color and underline status of a particular term in pdf file. Is this possible to get these features of the search term for all occurences of word in the file. Please help with some useful example/link. I need to use this feature in one of my product developed in c# with .net 3.5 framework.
Also, if this can be done with acrobat sdk then to use this how I can deploy my solution to be able to search these on any machine with/without acrobat reader etc. and what cost I'll need to pay to use this feature with my product.

Underline is not an attribute of PDF, but color and font information is available to plugins or library clients.
You would need to license the Adobe PDFLibrary from Datalogics (http://www.datalogics.com).
Leonard

Duplicate check on search term for BP creation in CRM

Similar Messages

Maybe you are looking for