Duplicate from ASM

Hi all,
I have had a request to do a duplicate from ASM on Solaris x86-64 (Little Endian) to a Windows 32 bit server (also Little Endian). I am thinking this would be a two step process.
1. Take a rman 'backup as copy' then restore to a Solaris x86-64 file system.
2. Then use the rman 'CONVERT DATABASE ON TARGET PLATFORM' to create the scripts to do the conversion to Windows 32-bit. Also run utlirp & utlrp to convert wordsize at the end of it.
Has anybody done this before?
Cheers
VicC

Hi,
I assume that you are using database 10g or higher. One way to achieve this is to
1. Create a database on Windows same Oracle version as on Solaris.
2. use impdp to plug the tablespaces from Solaris.
Regards,
Edited by: gjilevski1 on Aug 13, 2010 7:40 AM

Similar Messages

RMAN duplicate from RAC with ASM to RAC with ASM

I'm still reading and trying to figure out how to duplicate...and I'm finding that there are some extra considerations you have to work with with doing a RAC system.
Does anyone have any good links to articles/docs that spell out what to do in this scenario?
I'm wanting to duplicate from tape backups, using NO connectivity to the source/target....
My tape backups do include the spfile and control files (autobackup) from the source.
Thank you in advance,
cayenne

damorgan wrote:
Possibly you are confusing a database with a database.
A RAC database is a just a database. What is different is the instances, the clusterware, and the storage: For example ASM.
A backup is a backup is a backup.
Can you be more specific about what you are trying to do, on what hardware, operating system, version, and edition.
RMAN can not create an instance either RAC or stand-alone.Thank you for the reply.
I have my source system, OS = RHEL5, running Oracle 11Gr2...5 node RAC cluster.
I'm doing RMAN backups to tape...hourly arch. logs, Daily incremental lvl=1 backups and weekly incremental lvl=0
None of the tape backups have ever been tested for restoring...and I've never restored a database myself before, total noob here.
I have a test area I've set up. I have a 2 node RAC cluster, running 11Gr2 and OS=RHEL5.
The tape is accessible from both systems.
I am wanting to test the tape backups...and thought the RMAN DUPLICATE process would be the way to go.
I am wanting to NOT connect to the source database...trying to simulate somewhat of a disaster recovery scenario. I'm only wanting to use tape backup, and the test area for the auxiliary instance.
So far what I've seen I need to learn to do is something like:
1. Create a password file for new aux database to be duplicated to
2. Establish Net connectivity...
3. Create initial parameter file for aux instance
Due to a bug in note:334899.1, add this (because of RAC system)
norecovery_through_resetlogs=TRUE
4. Start aux instance NOMOUNT
Everything I'm reading though...is basically doing this from single instance to single instance...and what little info I've seen on doing it from RAC, indicates there are some differences. The "_no_recovery_through_resetlogs=TRUE" is one thing I found...but wondering what else.
Also, so many of the examples I'm finding...are doing the duplication connecting to the target/source...and also doing backups to disk rather than tape...
Right now, I'm at #1...trying to figure what to put into an init pfile...I'm seeing DB_name, which will be the same as the one I'm cloning from.
I'm not sure what else....
I'm wondering if this is necessary..since on the tape backups from the source...I backup the SPFILE...can that not be used somehow in this?
I'm seeing for the init file, examples show that I need to put in entries for control files and redo logs....if the source system was down and gone...how would I know where these were on the old system? This isn't documented anywhere....is there a way to do this if you didn't know.
If not..guess I need to go through all systems and document the layouts of where everything is located.
Also...most examples I'm finding, in addition to being single instance backup and restore/duplication...they are all using regular file systems....not much to go on with using ASM.
Anyway, I'm trying to learn here...and am having trouble finding examples to go from that match my setup.
Thank you in advance,
cayenne

Duplicate database from ASM to Non-ASM problem

Friends,
I am unable to duplicate the database from ASM TO Non-ASM,
OS: Linux AS4
Oracle version: 10.2.0.1
initAUXDB.ora parameters:
background_dump_dest=/u01/oracle/product/10.2.0/admin/auxdb/adump
core_dump_dest=/u01/oracle/product/10.2.0/admin/auxdb/cdump
background_dump_dest=/u01/oracle/product/10.2.0/admin/auxdb/bdump
user_dump_dest=/u01/oracle/product/10.2.0/admin/auxdb/udump
db_name=auxdb
undo_tablespace=undotbs1
undo_management=auto
undo_retention=900
db_block_size=8192
compatible=10.2.0.1
control_files='/u01/oracle/product/10.2.0/oradata/auxdb/control01.ctl'
db_file_name_convert=('+DATA','/u01/oracle/product/10.2.0/oradata/auxdb')
log_file_name_convert=('+DATA','/u01/oracle/product/10.2.0/oradata/auxdb')
db_create_file_dest='/u01/oracle/product/10.2.0/oradata/auxdb'
db_create_online_log_dest_1='/u01/oracle/product/10.2.0/oradata/auxdb'
My target database diskgroup info:
GROUP_NUMBER NAME SECTOR_SIZE BLOCK_SIZE STATE
1 DATA 512 4096 MOUNTED N
2 FLASH 512 4096 MOUNTED E
Please could you have look the following error:
type1:
Note: when I configure The log_file_name_convert=('+DATA') in initAUXDB.ora parameter file, the following error are occurring:
RMAN> run {
2> allocate auxiliary channel C1 device type disk;
3> duplicate target database to auxdb;
4> }
Starting Duplicate Db at 03-MAR-13
released channel: C1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/03/2013 14:43:05
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary filename +FLASH/prod/onlinelog/group_3.259.809008171 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +FLASH/prod/onlinelog/group_2.258.809008167 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +FLASH/prod/onlinelog/group_1.257.809008165 conflicts with a file used by the target database
type2:
when I configure The log_file_name_convert=('+FLASH') in initAUXDB.ora, again I am getting the following error:
RMAN> run {
2> allocate auxiliary channel C1 device type disk;
3> duplicate target database to auxdb;
4> }
allocated channel: C1
channel C1: sid=36 devtype=DISK
Starting Duplicate Db at 04-MAR-13
released channel: C1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/04/2013 08:37:10
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary filename +DATA/prod/onlinelog/group_3.263.809008169 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/prod/onlinelog/group_2.262.809008165 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/prod/onlinelog/group_1.261.809008163 conflicts with a file used by the target database
Please suggest me to overcome the above errors.

Hi Mr.Rao,
Thank you for your reply..
I follwed as per as your query, but I am getting different error:
channel C1: starting datafile backupset restore
channel C1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/system.256.809008077 <---------here the directory structure is "/u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/" but I mention in initauxdb.ora parameter only "/u01/oracle/product/10.2.0/odata/auxdb/".
restoring datafile 00002 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/undotbs1.258.809008077
restoring datafile 00003 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/sysaux.257.809008077
restoring datafile 00004 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/users.259.809008077
channel C1: reading from backup piece +FLASH/prod/backupset/2013_03_04/nnndf0_tag20130304t072249_0.265.809162569
ORA-19870: error reading backup piece +FLASH/prod/backupset/2013_03_04/nnndf0_tag20130304t072249_0.265.809162569
ORA-19505: failed to identify file "+FLASH/prod/backupset/2013_03_04/nnndf0_tag20130304t072249_0.265.809162569"
ORA-17503: ksfdopn:2 Failed to open file +FLASH/prod/backupset/2013_03_04/nnndf0_tag20130304t072249_0.265.809162569
ORA-15001: diskgroup "FLASH" does not exist or is not mounte
failover to previous backup
channel C1: starting datafile backupset restore
channel C1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/system.256.809008077
restoring datafile 00002 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/undotbs1.258.809008077
restoring datafile 00003 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/sysaux.257.809008077
restoring datafile 00004 to /u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/users.259.809008077
channel C1: reading from backup piece /u01/backup/prod/df_t809162421_s24_p1
channel C1: restored backup piece 1
piece handle=/u01/backup/prod/df_t809162421_s24_p1 tag=TAG20130304T072021
channel C1: restore complete, elapsed time: 00:01:17
Finished restore at 04-MAR-13
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "AUXDB" RESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
LOGFILE
GROUP 1 ( '/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_1.261.809008163',
'/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_1.257.809008165' ) SIZE 50 M REUSE,
GROUP 2 ( '/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_2.262.809008165',
'/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_2.258.809008167' ) SIZE 50 M REUSE,
GROUP 3 ( '/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_3.263.809008169',
'/u01/oracle/product/10.2.0/oradata/auxdb/prod/onlinelog/group_3.259.809008171' ) SIZE 50 M REUSE
DATAFILE
'/u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/system.256.809008077'
CHARACTER SET WE8ISO8859P1
contents of Memory Script:
switch clone datafile all;
executing Memory Script
datafile 2 switched to datafile copy
input datafile copy recid=1 stamp=809171578 filename=/u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/undotbs1.258.809008077
datafile 3 switched to datafile copy
input datafile copy recid=2 stamp=809171578 filename=/u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/sysaux.257.809008077
datafile 4 switched to datafile copy
input datafile copy recid=3 stamp=809171578 filename=/u01/oracle/product/10.2.0/oradata/auxdb/prod/datafile/users.259.809008077
channel C1: starting archive log restore to default destination
channel C1: restoring archive log
archive log thread=1 sequence=12
channel C1: restoring archive log
archive log thread=1 sequence=13
channel C1: reading from backup piece /u01/backup/prod/al_t809162496_s26_p1
channel C1: restored backup piece 1
piece handle=/u01/backup/prod/al_t809162496_s26_p1 tag=TAG20130304T072136
channel C1: restore complete, elapsed time: 00:00:04
archive log filename=/u01/oracle/product/10.2.0/db_1/dbs/arch1_12_809008161.dbf thread=1 sequence=12
channel clone_default: deleting archive log(s)
archive log filename=/u01/oracle/product/10.2.0/db_1/dbs/arch1_12_809008161.dbf recid=2 stamp=809171585
archive log filename=/u01/oracle/product/10.2.0/db_1/dbs/arch1_13_809008161.dbf thread=1 sequence=13
channel clone_default: deleting archive log(s)
archive log filename=/u01/oracle/product/10.2.0/db_1/dbs/arch1_13_809008161.dbf recid=1 stamp=809171583
channel C1: starting archive log restore to default destination
channel C1: restoring archive log
archive log thread=1 sequence=14
channel C1: reading from backup piece +FLASH/prod/backupset/2013_03_04/annnf0_tag20130304t072246_0.264.809162567
ORA-19870: error reading backup piece +FLASH/prod/backupset/2013_03_04/annnf0_tag20130304t072246_0.264.809162567
ORA-19505: failed to identify file "+FLASH/prod/backupset/2013_03_04/annnf0_tag20130304t072246_0.264.809162567"
ORA-17503: ksfdopn:2 Failed to open file +FLASH/prod/backupset/2013_03_04/annnf0_tag20130304t072246_0.264.809162567
ORA-15001: diskgroup "FLASH" does not exist or is not mounte
released channel: C1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/04/2013 09:53:11
RMAN-03015: error occurred in stored script Memory Script
RMAN-20506: no backup of archivelog found
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of log thread 1 seq 14 lowscn 542329 found to restore

ORA 600, duplicate from RAC to NON-RAC

Hi Experts,
I'm trying to restore Production database for development purpose point in time recovery
environment:
ASM: 11gR1
DB: 10gR2
At the end of internal duplicate steps i have faced error
contents of Memory Script:
Alter clone database open resetlogs;
executing Memory Script
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/16/2010 05:37:06
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01152: file 3 was not restored from a sufficiently old backup
ORA-01110: data file 3: '+DG1/dev/datafile/sysaux.534.737875511'Later i try to apply archives from production.. i have copied those and i started recovery .. i faced internal errors.
SQL> recover database using backup controlfile;
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [kcvhvdf_1], [], [], [], [], [], [],
[], [], [], [], []after a lot of workaround i found one doc from metalink
*Duplicate from active database raises ORA-01194 if one thead is closed [ID 1059699.1]*
but i checked thread status by gv$thread.. it is looking open from last month..
any other way to find closed threads?
so what could be the reason.
I have no time to raise an SR now.. any ideas will be highly appriciated.
Thanks
Edited by: CKPT on Dec 17, 2010 11:09 PM

I am about to use this hidden parameter (_allow_resetlogs_corruption=true
) due to the almost identical problem you experienced.
What are the risks and what next to do when I open the database?There is lot of RISK
I tried to recover manually using existing archives, But no use.
Raised an SR. as a last option provided by support and used that parameter, But this parameter is not suggestible, Before doing such thing, better to take backup of database(mount - cold backup).
This thread is almost 7 months old, if you have any issue create a new thread.

Resume a rman duplicate on asm

Hi folks,
ASM, 11gr2
My duplicate job failed after about 20 hours due to a tcp/ip failure to our tsm server.
I read in the oracle documentation that it is possible to resume the job.
So I did as described in the documentation and the duplicate was resumed.
RMAN said "Using previous duplicated file...." for all the files allready restored, and it should only restore the remaining files. About 200Gb.
But after 5 hours and 350Gb (tsm shows this amount) it is still not finished.
I am duplicating from asm to asm.
Why is this happening??
Is it because I am on ASM fs? The oracle doc said nothing about resume would not work on asm.
Thanks!

Hello,
This is half information, you are using ASM on production but what about Dev serve ASM or NON-ASMr? What's your Oracle version? Prod? Dev?
Stepwise instructions
See following Doc ID: 73912.1 : RMAN: Creating a Duplicate Database
Regards
Edited by: OrionNet on Mar 1, 2009 11:10 PM

Best app to remove duplicates from iTunes 2014

Hi All,
I've been trying to research the best application to sort and remove duplicates from my iTunes library. I have over 7000 songs and iTunes built in duplicate finder doesn't look at the track fingerprint, which is useful for those songs which are labelled "Track_1" etc.
Has anyone reviewed any recent products? I was looking at TuneUp, but after reading so many negative comments, I've decided not to go down that path. I would prefer a program that did most of the work for me, due to the amount of songs. Happy to pay for a good product...
I do have MusicBrainz Picard, which has done a great job of tagging, but don't remove duplicates.
Thanks in advance :-)

Tune up is a great app. When they moved from version 2 to version 3 is when it went to crap and all heck broke loose. They shut their doors but they have since re opened and went back to developing version 2. I use that version and I am pretty happy with it as being an overall cleanup utility. I also use Musicbrainz and a couple of other utilities but in the end if you have an enormous library 20k plus then you are going to have a few slip through. I would probably go with Tuneup if I were you and a thorough third party duplicate finder. Dupe Guru's music edition seems to do a pretty good job.

How to delete duplicates from iTunes but not hard drive

I'm running iTunes 10 and have my music stored on both my NAS drive and backup drive. Each track appears twice on iTunes: once as lossless for streaming and and once as compressed AAC files for synching to ipods and iphones.
For some reason, when my PC is turned on after being turned on, the linkstation cannon be 'seen' by iTunes, and therefore if I try to play a track, 'the original file cannot be found'. If I use the 'add folder to library' option in the 'file' dropdown menu, the tracks are located again.
Unfortunately, I the last time I did this it resulted in 4 copies of each song on itunes; 2 lossless and 2 AAC.
I have 2 questions:
Firstly is there an easy way to delete the duplicates from my iTunes library so that I am left with only 1 lossless and one AAC copy, but not deleing the files from my NAS and backup drive?
Is there a way I can just store my music as lossless, but convert it easily to aa more compressed format for synching to iphone and ipod?
Thanks!

You can try my new DeDupe script. It should be able to get rid of the redundant copies while keeping one copy of each track in each format. See this thread for background.
I've not used the feature, but iTunes can downsample to 128k AAC on the fly as it syncs your devices. Of course you might find the process is too slow for your needs or find that 128k is too much compression.
tt2

Deleting Duplicates from a table

Its a huge table with 52 fields and 30k rows. I need to delete the duplicates based on one of the fields. GROUP BY is taking a lot of time. Is there a quicker way to delete the duplicates using SQL.
Thanks.

How many duplicates have you got? Do you have even a vague idea? 1%? 20%? 90%?
One way would be to add a unique constraint on the column in question. This will fail, of course, but you can use the EXCEPTIONS INTO clause to find all the ROWIDs which have duplicate values. You can then choose to delete those rows using a variant on teh query already posted. You may need to run %ORACLE_HOME%\rdbms\admin\utlexcptn.sql to build the EXCEPTIONS table first.
This may seem like some unnecessary work, but the most effective way of deleting duplicates from a table is to have relational integrity constraints in place which prevent you having duplicates in the first place. To paraphrase Tim Gorman, you can't get faster than zero work!
Cheers, APC

HT2905 i have just followed all the insrtuctions in support to remove duplicates from my library but now most of my musicis gone except for my recent purchases. How come and how do i fix it?

i have just followed all the instructions in support to remove duplicates from my library but now most of my music is gone except for my recent purchases. How come and how do i fix it?

Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here.

Delete Duplicates from internal table with object references

Hi
How can I delete duplicates from an internal table in ABAP OO based on the value of one of the attributes?
I have created a method, with the following code:
LOOP AT me->business_document_lines INTO l_add_line.
    CREATE OBJECT ot_line_owner
      EXPORTING
        i_user      = l_add_line->add_line_data-line_owner
        i_busdoc = me->business_document_id.
      APPEND ot_line_owner TO e_line_owners.
ENDLOOP.
e_line_owners are defined as a table containing only object references.
One of the attribute of the object in the table is called USER. And I would like to do a "delete ADJACENT DUPLICATES FROM e_line_owners", based on that attribute.
How can do this?
Regards,
Morten Nielsen

Hello Morten
Assuming that the instance attribute is <b>public </b>you could try to use the following coding:
SORT e_line_owners BY table_line->user.
DELETE ADJACENT DUPLICATES FROM e_line_owners
    COMPARING table_line->user.
However, I am not really sure (cannot test myself) whether <b>TABLE_LINE</b> can be used together with SORT and DELETE.
Alternative solution:
DATA:
     ld_idx    TYPE sy-tabix.
LOOP AT e_line_owners INTO ls_line.
    ld_idx = syst-tabix + 1.
    LOOP AT e_line_owners TRANSPORTING NO FIELDS FROM ld_idx
                   WHERE ( table_line->user = ls_line->user ).
      DELETE e_line_owners INDEX syst-tabix.
    ENDLOOP.
ENDLOOP.
Regards
Uwe

Delete duplicates from query output

Hello,
I would like to delete duplicated records before the output of a SAP query
I tried writing in SQ02 in additional coding, under "Free coding":
data %dtab type standard table of /1BCDWB/IQ000000001053 with header line.
sort %dtab by vbeln posnr.
DELETE ADJACENT DUPLICATES FROM %dtab.
In this way I get the short dump when running the query: "Statement is not accessible.".
If I declare %dtab in the additional coding under "DATA", when I run the query I get the error "%DTAB" has already been declared.".
If I don't declare %dtab, I can't generate the infoset.
Do you have any suggestion about the way of obtaining this result?
Thanks in advance for your support.
Best regards,
Andrea

Hello,
I didn't find any solution to this problem. I choosed another way: I asked an ABAPer to develop a report to get the same information I wanted to get with the query, as in the ABAP report there's more "space to move".
Best regards,
Andrea

Delete duplicate from internal table

HI Abapers,
I have a query on how to remove the duplicates from an internal table
My internal table data is as follows :
Cno    Catg1 Catg2
01       0         1000
01      2000         0
I want to get only one record as
01   2000 1000
How to get the result.
I tried sorted by cno and used delete duplicates but it was not helpful.
Is there any other alternative to get this done
Please help me.
Regards,
Priya

check it out with delete adjacent duplicate records
Deleting Adjacent Duplicate Entries
To delete adjacent duplicate entries use the following statement:
DELETE ADJACENT DUPLICATE ENTRIES FROM <itab>
                                  [COMPARING <f1> <f 2> ...
                                             |ALL FIELDS].
The system deletes all adjacent duplicate entries from the internal table <itab>. Entries are duplicate if they fulfill one of the following compare criteria:
Without the COMPARING addition, the contents of the key fields of the table must be identical in both lines.
If you use the addition COMPARING <f1> <f 2> ... the contents of the specified fields <f 1 > <f 2 > ... must be identical in both lines. You can also specify a field <f i > dynamically as the contents of a field <n i > in the form (<n i >). If <n i > is empty when the statement is executed, it is ignored. You can restrict the search to partial fields by specifying offset and length.
If you use the addition COMPARING ALL FIELDS the contents of all fields of both lines must be identical.
You can use this statement to delete all duplicate entries from an internal table if the table is sorted by the specified compare criterion.
If at least one line is deleted, the system sets SY-SUBRC to 0, otherwise to 4.

How to choose in Delete Duplicates from internal table?

Now I need to delete Duplicates from internal table,
So at first I sort
than I delete duplicate
Sort itab1 BY Company_Code Asset_No Capital_Date.
      DELETE ADJACENT DUPLICATES FROM itab1 COMPARING Company_Code Asset_No Capital_Date
Company_Code
Asset_No
Capital_Date
Remark
BC35
1515593
20021225
Helen
BC35
1515593
20021225
Common Asset
BC35
1515594
20030109
Judy
BC35
1515594
20030109
Common Asset
But here comes my problem~If I want to delete the Common Asset in Remark Column,how I let it choose the right one to do it?

Hi Jack
Try the below coding..
Report zsamp.
types: begin of t_tab,
        comp_code(4) type c,
        ***_no(7) type n,
        cap_date type d,
        remark type string,
        end of t_tab.
data: i_tab type TABLE OF t_tab,
       w_tab type t_tab.
w_tab-comp_code = 'BC35'.
w_tab-***_no = '1515593'.
w_tab-cap_date = '20021225'.
w_tab-remark = 'Helen'.
append w_tab to i_tab.
w_tab-comp_code = 'BC35'.
w_tab-***_no = '1515593'.
w_tab-cap_date = '20021225'.
w_tab-remark = 'Common Asset'.
append w_tab to i_tab.
w_tab-comp_code = 'BC35'.
w_tab-***_no = '1515594'.
w_tab-cap_date = '20030109'.
w_tab-remark = 'Judy'.
append w_tab to i_tab.
w_tab-comp_code = 'BC35'.
w_tab-***_no = '1515594'.
w_tab-cap_date = '20030109'.
w_tab-remark = 'Common Asset'.
append w_tab to i_tab.
sort i_tab by remark.
delete ADJACENT DUPLICATES FROM i_tab COMPARING remark.

How to add and remove storage from ASM at the same time?

Scenario:
I want to drop some disks from asm
1- Add disk to asm -----> rebalance
2- drop disk from asm ----> rebalance
Is there anyway to make this process faster instead of going to rebalancing twice?

I think you could try something like this.....
Add with a power limit of zero and then drop the disks with a powerlimit of 11.
alter system set ASM_POWER_LIMIT=0;
select * from v$asm_operation;
alter diskgroup DBFILE01_GRP
add disk 'ORCL:DB0009', 'ORCL:DB0010', 'ORCL:DB0011', 'ORCL:DB0012';
alter diskgroup DBFILE01_GRP drop disk DB0001, DB0002, DB0003, DB0004;
alter diskgroup DBFILE01_GRP rebalance power 11;
select * from v$asm_operation;

How Do I Copy Files to MS Windows Local Drive From ASM

All,
How to I refer to a Windows drive letter in the cp command? When I use C:\my_path\my_file ASMCMD gives me an ASMCMD-08010 no user name is specified in remote instance because it thinks the colon is part of a connect string. I've spent a whole afternoon trying to figure this out and am stumped> :-(
TIA,
Bob S.

Vikash Jain (DBA Trainee) wrote:
Hi EdStevens ,
I came to know this thread is too old .. but posted my problem here so that i can the solution ..
still i m not getting any solution for this problem.
here i am trying to copy file from ASM file system to Window drive ..am anable to do .
ASMCMD [+FRA/ASMDB/autobackup/2012_04_10] > cp +FRA/ASMDB/autobackup/2012_04_10/s_780262450.307.780262451 d:\olam\s_780262450.307.780262451.bak
ASMCMD-08010: no usr name is specified in remote instance connect_string->'d'ASMCMD [+FRA/ASMDB/autobackup/2012_04_10] > cp +FRA/ASMDB/autobackup/2012_04_10/s_780262450.307.780262451 d:/olam/s_780262450.307.780262451.bak
ASMCMD-08010: no usr name is specified in remote instance connect_string->'d'
You can see i have tried both back slash and forward slash.. but unfortunately nothing working for me.
Do you any solution for my problem ?
Thanks and regards,
Vikash Jain(Junior DBA)I don't have the answer you are looking for. Never tried to do this myself. I see lots of hits on 'ASMCMD-08010" on google.

Duplicate from ASM

Similar Messages

Maybe you are looking for