Duplicates appearing when user adds someone to 'to' field in Outlook 2010 calender invite

Hi Everyone,
I have a user that when they send calender invites, when they add people in the 'to' field they will appear multiple times. i.e the contact address, the full email address etc.
We have re - imaged the PC, re created the users PST file, run outlook in online mode, Moved the users account to another DB, and still no progress, duplicates are still appearing
See attached screenshot for example
Has anyone had to deal with this problem before, if so how was it resolved, if it was ever resolved, Help would be greatly appreciated as we are scratching our heads in IT here

Hi,
As per the description, I understand that you'll have duplicate email addresses in the To... field when create calendar invites.
In order to understand the issue more deeply, I would like to clarify the following questions:
How did he/she "add people" in the To... field? Did he/she directly type email address or pick it from your address book?
Will the duplicate happen right after adding people in the To... field or after sending the invites?
Seems you've tried a lot on the machine side, I suggest we first try this on OWA (Outlook Web App) and see if issue persists. This will help to determine whether the issue is on the client side or the mailbox (server) side.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Iphone4s keyboard doesn't appear when I add a new contact after receiving a call

iphone4s keyboard doesn't appear when I add a new contact after receiving a call

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

How to trigger email notification when users fail to reset your password in fim 2010 r2.

Hi,
how to trigger email notification when users fail to reset your password in fim 2010 r2
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

Can I keep the CC value when user click the REPLY TO button in outlook?

Hi all,
I have set the CC value when I send email out. But when user reply the received email, the CC value will be displayed in the TO field. If anyone knows how can I keep the CC value unchanged when user reply the received email?
Thanks very much.

It depends entirely on the mailer they're using, you have no control over it.

Outlook 2010 calendar invites - duplicate recipients

Have a client with Outlook 2010, she’s finding many of the Outlook invitations on her calendar have multiple copies of the same recipients.
This user's calendar is opened on multiple computers - running Outlook 2003, 2007, 2010.
I’m trying to reproduce this issue reliably, but not having luck yet. Tried creating an invitation, moving the time, but couldn’t get issue to occur.
Has anyone run into this?

Hello,
What Anjula meant to say was there are no updates that corrects the issue you are having nor are there any "Solution in the works". From Time to time we have made changes to Calendar work flow that enhances calendar performance. So its advisable that we have
clients at the latest Service packs and updates available. I don't think there will be any new changes to the work flow in the near future. Its best advised that you have the latest updates installed for Office. You can install the updates from here.
953878 Cumulative updates are available from the Microsoft Office team to fix reported problems
http://support.microsoft.com/default.aspx?scid=kb;EN-US;953878
To troubleshoot this issue. We can do the following
> For manager Delegate scenarios its best advised to have a similar version of Outlook client.
> we can review permissions assigned on the calendar. Change that or remove delegates to see if there is any impact.
> Disable mobile device usage etc to narrow down the issue.
There are some Self help articles that can help you out:
Outlook meeting requests: Essential do’s and don’ts
http://office.microsoft.com/en-us/outlook-help/outlook-meeting-requests-essential-dos-and-donts-HA001127678.aspx
How to troubleshoot missing and duplicate appointments in Outlook
http://support.microsoft.com/default.aspx?scid=KB;EN-US;890436
If this fails to correct the issue I would suggest that you open a Support Incident with us. As this issue requires in-depth support so its best that you open a support ticket with us. Please visit the following link to see the various support
options that are available to you: http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone . This will help us address your issue more efficiently.
I would encourage you to do reply back here in forum once you have received a solution to the problem.
When you do open a support incident with us we will be applying the following troubleshooting steps as listed in the article.
Working with support to troubleshoot the Outlook calendar in an Exchange environment
http://technet.microsoft.com/en-us/library/cc891495.aspx
Hope this helps,
Best Regards,
Nitish Karmakar [MSFT]

Is there a way to automatically update events in the Outlook 2010 calendar when adding events in the iCloud calendar in Outlook 2010?

I am using Windows 7 and Outlook 2010. I have synced my Outlook calendar with my iPhone using the iCloud Control Panel. This is great, but when I add an event in the iCloud calendar in Outlook 2010 and subsequently send out invitations to the event, I get the following error:
"This meeting is not in the Calendar folder for this account. Responses to this meeting will not be tallied. Do you want to send anyway?"
I select "Yes" and the invite goes out. However, when invitees receive the email invitation, there should be 2 emails - one from Outlook and one from iCloud. The iCloud invite does not always come through. If the invitee responds to the Outlook email invite, it does not show up on the iCloud Calendar.
Is there a reason that the iCloud email is not always sent or is there a way to some how update the Windows Outlook Calendar when adding events in the iCloud Calendar through Outlook?

I have just discovered this problem as well.
Very annoying!
Now all off my meetings entered in Outlook on my desktop PC are not syncing with my ipad and iphone.
If I had known this would have happened I would never have downloaded Version 2.0 of the icloud control panel.
Does anyone know how I can get the earlier version back?

Add "Edit Message" to everyone's Outlook 2010 ribbon With GPO?

We would live everyone to get the item in the ribbon described in the link below that allows users to save attachments back to their email without downloading. We need to do this without requiring the users to go through all the steps to do it manually.
http://www.slipstick.com/outlook/outlook-2010/edit-and-save-outlook-2010-attachments/
We have the Office 2010 ADM template for Group Policy installed. Is there a setting that accomplishes this?

Hi,
The Ribbon settings are customized by using XML to define the components of the UI and with programming code, also known as callback procedures, to give the components their functionality.
Customizing the UI is simply a matter of updating the XML and, optionally, updating or adding new callback procedures. We can add the updated XML to a single program file by modifying the Microsoft Office Open XML file.
We can also customize the UI by placing an *.officeUI file in a specific location on a user’s computer. Then, the next time that the user starts the application, the customized UI is displayed.
For more information, please refer:
http://msdn.microsoft.com/en-us/library/ee704589(v=office.14).aspx
Best Regards,
Steve Fan
TechNet Community Support

How do I add an email button to open outlook 2010 on to the navigation bar

Using windows 7 with outlook 2010. How can I add a button to open up outlook to the navigation bar

You can do that with the Get Mail add-on - http://webdesigns.ms11.net/getmail.html

I recently updated to version 12. Now when i click on a web link from outlook 2010 the web page opens in an existing tab. I want it to open in a new tab.

I recently updated to the latest version of FF (12). Now when i try to open a URL from an email INSIDE Outlook 2010 it opens in what ever tab FF has opened. I want to be able to open the URL in a new tab. Using the CTRL feature does not work from inside Outlook.

Hi,
Try this:
Preferences > Tabs > Open links that open in a new window in: New Tab

Final Cut Problem - Duplicate frames when using add composite

I have a problem with Final cut hopefully someone will be able to help.
Clip A & Clip B on one layer and Clip C on another, being used as a transition between the two. Composite mode 'Add' being used on Clip C
When Clip C overlaps both clips in the timeline it causes duplicate frames in Clip B during the 'transition'. If I move it to just overlap Clip A the duplicate frames disappear.
Any thoughts appreciated
Thanks
Message was edited by: prayforsnow
Message was edited by: prayforsnow

Hi -
No apologies necessary! I think it may be some of the terms you are using that are throwing me off. A couple more questions:
prayforsnow wrote:
I exported my movie as a mov (HDV 720p) from imovie and imported into final cut.
I then split the clip with the razor tool into the edits I had previously made in imovie with the intention of adding my compositing clip as a transition between these clips.
OK, I follow that up to "adding my compositing clip as a transition between clips". The compositing clip is the film burn effect that you have built as a separate clip?
I needed to split the clips so that I could move them around the timeline and align them with the composition clip I had. If i don't the composition clip will play for too long over the other clips.
Meaning you needed to adjust your edits so that the film burn will fit correctly as a transition over the scenes below, not masking too much of the scene?
The screenshot I have provided does not show them apart. It just shows the clip split ready to be moved.
OK
Upon adding my composition clip, frames from the end of the first clip are added to the start of the second creating a 'one cycle loop' regardless of whether these clips are joined (as shown in my screen shot) or moved apart.
Meaning if you separate the two clips, so that there is an actual gap between them, you still see frames from the first clip where there is only gap on the track below?
If i move the composition clip so that it only overlaps one of the clips ( so not really a transition anymore) the extra frames disappear. Move it back and they appear
Meaning if you place the film burn composite over a clip without a transition, it works as expected?
My only question is if, when you adjust the clips by separating them to get your desired spacing, is there really a gap between the first and second clip, or do you drag the end of the first clip to fill in the space created by the gap? That would cause the frames at the beginning of clip 2 to be repeated as they are being shown on the end of the previous (now extended) clip.
Thanks
MtD

Selection screen to appear when user clicks on radio button

hi
i have severla radio buttor in a radio button group
i want that whne user clicks on first radio butter selection scren 1 eg as below to apper
when use clicks on radio buton2 selection scree2 will appear please suggest
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE
text-008
PARAMETER : fyr2_fy type FIMC-RYEAR default 2008,
fyr2_cg type FIMC-CGYEAR default 2008,
fyr2_bk type FIMC-PERID default 7.
SELECTION-SCREEN END OF BLOCK B1.
regards
arora

Hi,
At selections screen on that radiiobutton group.
if radio_button1-status = 'X' (Active)
call screen 'scereen number' or set screen 'nuymber'.
else.
call screen...
endif.
Reward if helpful.
Best Wishes,
Chandralekha

Reseting the pages that appear when you add a tab

So i am talking about the sites that appear in boxes when you press the open a tab button. 9 boxes with the 9 most popular sites you visit.
I am not sure how exactly that is called so i couldnt find the answer through google.
Is there anyway to reset only that? I could reset the entire profile but i dont want to lose passwords/preferences etc

Not sure what you mean by "reset" the new tab page. The 9 items displayed on the New Tab Page are automatically determined by the history that you keep in Firefox.
You can add, delete, pin sites on that page. Does any of the following help?
*https://support.mozilla.org/en-US/kb/new-tab-page-show-hide-and-customize-top-sites
You can also try this add-on:
*https://addons.mozilla.org/en-us/firefox/addon/new-tab-tools/

How can we make the Retake Quiz button only appear when user reenters the course?

In a Captivate 8 Quiz, we need to force the user to close the course (so attempts are captured by the LMS) from the Quiz Results page. The Retake Quiz button cannot show at this time. However, when the learner reenters the course from the LMS, the bookmarking brings the user to the Results page again. We need a Retake Quiz button to only show when the user reenters the course, not on Quiz completion. Disabling the bookmarking disables the reporting of attempts. Does anyone know a way to make that happen or a workaround?

Have a look at my blog post:
http://blog.lilybiri.com/review-only-incorrect-slides-captivate-6
Lilybiri

Having templates appear when users click the "New Document" button in a document library with custom content types

Hi all,
I'm using SharePoint Online, but I'm seeing the same behavior in an on-prem 2013 instance as well. My situation is this:
- I've created a document library
- I've created a custom content type and attached a custom document template to it
- I've assigned the custom content type to the document library, and disabled the default "document" option
What I'm expecting to see is that when I browse to the document library and click "new document", that either a) a picklist appears allowing me to specify the document template I want (using the custom template I specified) or b) open the custom
template itself. That doesn't happen - instead, when I click new document I'm prompted to upload a file, which seems to contradict the whole point of using a custom content type/custom document template combo.
Am I missing something? The custom template isn't in the Forms library, which seems to be a problem if I wanted to use the custom document template instead of the default.
Ideally I'd like a menu like the one shown here:
http://social.msdn.microsoft.com/Forums/en-US/59ce3bd8-bf7f-4872-ae76-60d8c81dfc32/display-content-types-on-new-document-button-in-document-libraries?forum=sharepointgeneral, except with me being able to control the list of items that is shown.
Any ideas? Thanks!

Hi Brain,
What you have done is by design behavior.
If you want to show the Office document templates list (e.g. below image from your above referenced link) to select when click "+new document" link, this will need to install Office Web App 2013 which provides this feature,
you can new document and see it is using WopiFrame.aspx page, please see more from below article about how to configure OWA 2013 for SharePoint 2013 on-premise.
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

Set Portal Incidents to Active When User Adds Comment

Hi
Following on from this thread,
I am wondering if it is possible to adjust the workflow to include the parent incidents properties, such as source. My aim is to only use this workflow for incidents updated via the portal as the Exchange connector handles comments added via email.
I would assume that the trouble ticket user comments > has user comment relationship would need to be involved somewhere with a seedrole='target' in order to reference the parent however I'm unsure how I would combine this within the context of the add
relationship. Would a simple 'AND' join work?

Hi Yoosuf,
there is some replication time between Active Directory controllers, so it's maybe why the user can still log with old password.
You can adjust the logon/password rules in configtool (com.sap.security.core.ume.service, and see ume.logon.security*).
Brad

Duplicates appearing when user adds someone to 'to' field in Outlook 2010 calender invite

Similar Messages

Maybe you are looking for