Duration between two date

If there is two date and I want to know how many days, mouths and years between this two date (the duration between them).
example
the first date 15/01/2000
the second date 12/02/1980
the answer must be 19 years ,11 mouths and 3 days.
how can I write code of this describtion?
note:
don't forgot every four years have a year
with 366 days not 365 days.

I know that the differant between date is number of days but I can say the age of person to the date 15/1/2000 is for example 19 years, 11 mouths and 3 days if this person born in 12/2/1980.and I ask about this problem.

Similar Messages

How can I calculate the maximum number of days between two dates in a range of dates?

I have a column of dates spanning the couse of a few months. I would like to know if I can calculate the maximum number of days between each row and display the highest number. I currently have another column that calculates the days betwen the rows and I am currently just looking at the totals and highlighting the highest period.
Is this possible? Any help or suggestions are appreciated.
Thank you,
Trevor

This sounds totally possible, Can you post a screen shot of your table to make responding more focused? If you mean you want to:
A) compute the difference (in days) between two date in the same row, then
B) find the max duration (in days)
Here is my take on this problem:
D2 = C2-B2
select D2 and fill down
F1=MAX(D)
to perform the conditional formatting (to highlight the max duration) select column D, then set up conditional formatting as shown in the 1st image

Calculation of MONTHS , YEARS , & DAYS between two dates

Hi Experts,
Currently i am using this functional Module. which calculates the number of months between two dates.
   CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
         EXPORTING
              I_DATE_FROM = ITAB_PER-BEGDA
              I_DATE_TO   = ITAB_PER-ENDDA
         IMPORTING
              E_MONTHS    = CMONTHS.
BUT this functional module Rounding off the Month...Say ..if the total numbr of days between from & to date is 105 it is showing as 4 months ...
<b>Is there any other Functional Module</b> ????which Calculates the EXACT MONTH between two dates...(in the above case the month is expected to be 3 only since it is 105 days only)..
Kindly help me regarding this....

lakshimiraja,
You can use this function module.
report zrich_0003
       no standard page heading.
data: duration_in_months type i.
parameters: s_date type sy-datum,
            e_date type sy-datum.
call function 'DURATION_DETERMINE'
exporting
   unit                             = 'MON'
   factory_calendar                 = 'P6'    " Your factory calendar
importing
   duration                         = duration_in_months
changing
   start_date                       = s_date
   end_date                         = e_date
exceptions
   factory_calendar_not_found       = 1
   date_out_of_calendar_range       = 2
   date_not_valid                   = 3
   unit_conversion_error            = 4
   si_unit_missing                  = 5
   parameters_not_valid             = 6
   others                           = 7.
   write:/ duration_in_months.
Don't forget to reward if useful...

Working days between two date fields and Changing Factory Calendar

Hi,
I have to calculate working days between two date fields excluding the weekends and public holidays for Switzerland.
I have written the routine using factory calender and its working fine except for two problems now:
1. If any one of the date field is empty then teh rsult should be zero.
2. And the below code is working from 1996 but my cleints wants it to work for years before 1996 as well.
I also tried to change the Start date in SCAL for factory calendar but it says enter values between 1995 to 2020.
I am new to ABAP. Please help me how i can achieve these for below code.
DATA: IT_HOLIDAYS type TABLE OF ISCAL_DAY,
      IS_HOLIDAYS TYPE ISCAL_DAY.
DATA: T_DATE TYPE SY-DATUM,
      P_DATE TYPE SY-DATUM.
DATA : X_DATE(4) TYPE C.
DATA: CNT TYPE I.
REFRESH : IT_HOLIDAYS.
CLEAR : IT_HOLIDAYS.
T_DATE = SOURCE_FIELDS-/BIC/ZCCCHP812.
P_DATE = SOURCE_FIELDS-/BIC/ZCCCHP810.
CALL FUNCTION 'HOLIDAY_GET'
EXPORTING
HOLIDAY_CALENDAR = 'CH'
FACTORY_CALENDAR = 'CH'
DATE_FROM = P_DATE
DATE_TO   = T_DATE
TABLES
HOLIDAYS = IT_HOLIDAYS
EXCEPTIONS
FACTORY_CALENDAR_NOT_FOUND = 1
HOLIDAY_CALENDAR_NOT_FOUND = 2
DATE_HAS_INVALID_FORMAT = 3
DATE_INCONSISTENCY = 4
OTHERS = 5.
DESCRIBE TABLE IT_HOLIDAYS LINES CNT.
X_DATE = T_DATE - P_DATE - CNT.
RESULT = X_DATE.
Please help
Regards
Zabina
Edited by: Syed786 on Nov 2, 2011 9:15 AM

Hi Zabina,
Try this function module 'DURATION_DETERMINE'.
Give the factory calendar and unit as DAY
With regards,
Rajesh

How to calculate the month difference between two date char. in Query?

Customers would like to see how many months passed between two date type of characteristics (e.g., the month difference between the current date and the scheduled delivery date in the record) and put the result into the column as KF.
We would have to grab the fiscal year/period kind of value and then do the subtraction, e.g., if the current date value is 2/28/2008 and the scheduled delivery date value in the record is 12/01/2007, the correct result should be 2 month difference between these two date values, but could someone here give us the technical light on how to make this happen in query design?
Thanks and we will give you reward points for the correct anwsers!

Hi Kevin,
The Badi is RSR_OLAP_BADI.
You can create an implementation using Transaction SE18.
The implementation is per cube and is defined in the filters.
In the Implementation you have the following methods :
1. Define : Here you will provide the Keyfigure you need as a virtual one.
2. Initilialize : Any Init Function you want to do.
3. Compute. This is called per datarecord and here you can cimpute your value.
Hope this helps.
Pralay Ahluwalia

As to the data type of the data type of the difference between two date type of datas

Hi,
I have a question about the data type of the difference between two date type of datas.
There are two date type of datas as:
SSHIPMENTS.RECEIVEDATETIME
SSHIPMENTS.PROMISEDATETIME
I try to use the following SQL Script in Oracle SQL*Plus as:
SELECT CASE
WHEN (SSHIPMENTS.RECEIVEDATETIME - SSHIPMENTS.PROMISEDATETIME) < '000 01:00:00.000' THEN 'OnTime'
WHEN (SSHIPMENTS.RECEIVEDATETIME - SSHIPMENTS.PROMISEDATETIME) < '000 01:30:00.000' THEN '60-89 Minutes'
ELSE '3+ Hours'
END
FROM SSHIPMENTS;
The error message of "Invalid Number" for the '000 01:30:00.000' happens.
I don't know if the data type of the interval is wrong.
Many Thanks,
Cathy

SELECT CASE
WHEN (to_char(SSHIPMENTS.RECEIVEDATETIME,'hhmiss') - to_char(SSHIPMENTS.PROMISEDATETIME,'hh24miss')) < '010000' THEN 'OnTime'
WHEN (to_char(SSHIPMENTS.RECEIVEDATETIME,'hhmiss') - to_char(SSHIPMENTS.PROMISEDATETIME,'hh24miss'))< '000 01:30:00.000' THEN '60-89 Minutes'
ELSE '3+ Hours'
END
FROM SSHIPMENTS;
just try it out..

No of Fridays in between two date

Hi all
What is the Qucikest and easy way to retreive the NO of fridyas in betwen two dates
Thanks & Regards
Vivek

vivekvm wrote:
Hi all
What is the Qucikest and easy way to retreive the NO of fridyas in betwen two dates
Make sure you test the boundary conditions for any solution you get.
Have you defined exactly what you mean by "in between two dates", for example. do you want to count the end points if one, or both, of them is a friday ?
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
"Science is more than a body of knowledge; it is a way of thinking"
Carl Sagan

How can i get report between two dates?

Hi
how can i get report between two dates?
for example i want get reports between 20/4/2002 & 27/4/2002.
my table has date column and i can get first date( exam : .... where date:=a and/or ....i don't know this part)
thanks alot.
Regards
The Oracle Reports Team
http://otn.oracle.com/

where exam_date between :from_date and :to_date
from_date and to_date are user_parameter

Difference between two date ,according to office time.

hi,
How can I get diffrence between two date.
If I select from-date 20-03-2012 09:30AM and to-date 20-03-2012 06:30PM then output should be 1 day(as it is office time from 09:30 AM TO 06:30 PM).
ACCORDINGLY If I select from-date 20-03-2012 09:30AM and to-date 21-03-2012 02:00PM then output should be 1.5 day
select 24*(to_date(:P2_TO_DATE,'DD-MM-YYYY HH:MIPM') - to_date(:P2_FROM_DATE,'DD-MM-YYYY HH:MIPM'))"date" from dual;

Hello Shirish,
WITH dates AS(
    SELECT TO_DATE ('20-03-2012 09:30AM', 'DD-MM-YYYY HH:MIPM') AS start_date
           ,TO_DATE ('20-03-2012 06:30PM', 'DD-MM-YYYY HH:MIPM') AS end_date
    FROM    dual
    UNION ALL
    SELECT TO_DATE ('20-03-2012 09:30AM', 'DD-MM-YYYY HH:MIPM') AS start_date
           ,TO_DATE ('20-03-2012 04:15PM', 'DD-MM-YYYY HH:MIPM') AS end_date
    FROM    dual
    UNION ALL
    SELECT TO_DATE ('20-03-2012 09:30AM', 'DD-MM-YYYY HH:MIPM') AS start_date
           ,TO_DATE ('21-03-2012 02:00PM', 'DD-MM-YYYY HH:MIPM') AS end_date
    FROM    dual
    UNION ALL
    SELECT TO_DATE ('20-03-2012 09:30AM', 'DD-MM-YYYY HH:MIPM') AS start_date
           ,TO_DATE ('21-03-2012 12:00PM', 'DD-MM-YYYY HH:MIPM') AS end_date
    FROM    dual
    UNION ALL
    SELECT TO_DATE ('20-03-2012 04:30PM', 'DD-MM-YYYY HH:MIPM') AS start_date
           ,TO_DATE ('21-03-2012 02:00PM', 'DD-MM-YYYY HH:MIPM') AS end_date
    FROM    dual
    UNION ALL
    SELECT TO_DATE ('20-03-2012 04:30PM', 'DD-MM-YYYY HH:MIPM') AS start_date
           ,TO_DATE ('22-03-2012 02:00PM', 'DD-MM-YYYY HH:MIPM') AS end_date
    FROM    dual
    UNION ALL
    SELECT TO_DATE ('20-03-2012 04:30PM', 'DD-MM-YYYY HH:MIPM') AS start_date
           ,TO_DATE ('22-03-2012 10:00AM', 'DD-MM-YYYY HH:MIPM') AS end_date
    FROM    dual
,times as(
SELECT start_date
       ,end_date
       ,TRUNC (end_date - start_date) days
       ,MOD (end_date - start_date,1) hours
       ,(start_date - 9.5/24 - TRUNC (start_date))*24 offset_start
       ,(end_date - 9.5/24 - TRUNC (end_date))*24 offset_end
       ,(end_date - 9.5/24 - TRUNC (end_date))*24
        - (start_date - 9.5/24 - TRUNC (start_date))*24 offset_diff
FROM    dates
SELECT TO_CHAR(start_date, 'DD-MM-YYYY HH:MIPM') AS start_date
       ,TO_CHAR(end_date, 'DD-MM-YYYY HH:MIPM') AS end_date
       ,days
       ,ROUND(offset_start,2) offset_start
       ,ROUND(offset_end,2) offset_end
       ,ROUND(offset_diff,2) offset_diff
       ,CASE WHEN offset_diff > 4 THEN
            days + 1
        WHEN offset_diff > 0 THEN
            days + 0.5
        WHEN offset_diff = 0 THEN
            days
        WHEN offset_diff + 9 > 4 THEN
            days + 1
        ELSE
            days + 0.5
        END computed_days
FROM timesThe first step (subquery times) computes the full days and the difference between start_date and end_date, compared to the beginning of the office ours (9.5 /24)
The second step takes the days and according to the possible values of the difference adds a half or a full day.
Regards
Marcus
Edited by: Marwim on 19.03.2012 11:23
CASE offset_diff = 0

Date difference between two dates

hi All,
i have to right a stored proc to find the difference between two dates.
for example of i give
startdate as 4/1/2015 and enddate 14/1/2015
i should get 1 year , 10 days and 0 months .
i have tried the DateDiff function but it does not calculate the leap year.
please help.

DECLARE @from datetime
DECLARE @to datetime
SET @from = '20150104 8:00'
SET @to = '20150114 10:30'
SELECT DATEDIFF(minute,@from, @to) % 60 as Minutes
SELECT (DATEDIFF(minute,@from, @to) / 60) % 24 as Hours
SELECT DATEDIFF(minute,@from, @to) / (60 * 24) as Days
SELECT DATEDIFF(month,@from, @to) as Months
SELECT DATEDIFF(year,@from, @to) as Year
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Difference between two date in bex query

Hi all,
I need to do a difference between two date using formula variable processing type customer exit beaucause I must use factory calendar in the formula.
How can I do it?
Can you give me an example of the routine?
Thanks a lot
Gianmarco

Hi,
You can still use the same code to copy it and customize as per your need. All you need to do is to subract the dates using the class: CL_ABAP_TSTMP after converting to timestamp and resulting seconds you convert back to days....Please get help from the developers to do this...
Also, ensure that you write back this difference value to your variable so you get it on the reports for your calculations...
Cheers,
Emmanuel.

Find the difference between two dates for the specific month and year

Hi,
I have two dates, start date is 30/12/2012 and end date is 04/01/2013. Using datediff I found the difference of days between two dates. But I find the no of days in January 2013. ie output is 4 instead of 6. I input month and year to find the no of days
for that date. In this case I input Jan 2013. How can I sql this ?

I don't understand how most of the answers provided here not analytically solving the problem with many cases possible.
First let me understand you:
You have 2 dates range and you want to calculate day range for specific month and year between the original date range.
declare @for_month int = 1 --January
declare @for_year int = 2013
declare @StartDate date = '2012-12-20'
declare @EndDate date = '2013-01-04'
SELECT
CASE
WHEN (DATEPART(MONTH, @StartDate) = @for_month and DATEPART(MONTH, @EndDate) = @for_month) and ((DATEPART(YEAR, @StartDate) = @for_year or DATEPART(YEAR, @EndDate) = @for_year)) THEN
DATEDIFF(DAY, @StartDate,@EndDate)
WHEN (@StartDate < cast(CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date)) and (@EndDate between (cast(CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date)) and (cast(DATEADD(d, -1, DATEADD(m, DATEDIFF(m, 0, cast( CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date)) + 1, 0)) as date))) THEN
DATEDIFF(DAY, DATEADD(MONTH, DATEDIFF(MONTH, -1, @EndDate)-1, 0),@EndDate)
WHEN (@EndDate > cast(DATEADD(d, -1, DATEADD(m, DATEDIFF(m, 0, cast( CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date)) + 1, 0)) as date)) and (@StartDate between (cast(CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date)) and (cast(DATEADD(d, -1, DATEADD(m, DATEDIFF(m, 0, cast( CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date)) + 1, 0)) as date))) THEN
DATEDIFF(DAY, @StartDate,DATEADD(d, -1, DATEADD(m, DATEDIFF(m, 0, @StartDate) + 1, 0))) + 1
WHEN ((DATEDIFF(DAY, @StartDate, cast(DATEADD(d, -1, DATEADD(m, DATEDIFF(m, 0, cast( CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date)) + 1, 0)) as date)) >= 0) and (DATEDIFF(DAY, cast(CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date), @EndDate) >= 0)) THEN
DATEDIFF(DAY, cast( CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as datetime), DATEADD(d, -1, DATEADD(m, DATEDIFF(m, 0, cast( CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as datetime)) + 1, 0))) + 1
ELSE
0
END as [DD]
I don't know how you calculate day range between 01/01/2013 and 04/01/2013
is 4, it is actually is 3 but if that is the case, you can add 1 from the condition.

Select Query Between two dates...

Hi Guru's,
I need a Select Query between two dates, also if the record not found for any in between date then it should return NULL or 0 ...
for Example
1. I am having two records in DB for date 2-10-2008 & 4-10-2008
2. Now suppose I have given Query for date between 1-10-2008 to 5-10-2008
Then it should return me 5 records with valid values for 2 & 4 and NULL for other 1,3,5
Thanks.

Try like this:
with
t as
      select date '2008-10-02' as dt, 'Record #1 (in DB)' as str from dual union all
      select date '2008-10-04' as dt, 'Record #2 (in DB)' as str from dual
select v.dt, t.str
from (
         select date '2008-10-01' + level - 1 as dt
           from dual
         connect by level <= (date '2008-10-05' - date '2008-10-01') + 1
       ) v
left join t
    on v.dt = t.dt
order by 1

Using pl/sql function for each day between two dates.

Hi,
create TABLE EMP(
ID_EMP NUMBER,
DT_FROM DATE,
DT_TO DATE,
CREATE_DATE DATE);
into EMP(ID_EMP, DT_FROM, DT_TO, CREATE_DATE)
Values(100, TO_DATE('07/01/2008 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('04/30/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'),TO_DATE('05/08/2009 14:11:21', 'MM/DD/YYYY HH24:MI:SS'));
I have a function called elig_pay_dates(date p_date), which returns the code for person payment eligibility for a particular date. For paid dates it's 'P' and for unpaid dates it's 'N'.
How can I check this function between two dates for each day. Example : 07/01/2008 to 04/30/2010.
By using this function with select I needs to display the dates when there is a change in status.
I am expecting data in following manner from above logic(this is example):
07/01/2008 --- 07/01/2009 ---'P'
07/02/2009 -- 07/25/2009 ----'N'
07/26/2009 -- 01/01/2010 ---'P'
01/02/2010 -- 01/13/2010 --'N'
01/14/2010 -- 01/18/2010 --'P'
01/19/2010 -- 04/30/2010 -- 'N'
I thought of looping for each day date but that seems to be expensive for online application. Is there any way that I can achieve this requirement with sql query ?
Thanks for your help,

Certainly not the best way to code the requirement, but it does achieve the result you are looking for in a fairly quick time
create or replace
function test_ret_paid_unpaid (p_date in date)
return varchar2
is
v_ret     varchar2(1);
begin
if ( (p_date between to_date('07/02/2009', 'MM/DD/YYYY') and to_date('07/25/2009', 'MM/DD/YYYY') ) or
       (p_date between to_date('01/02/2010', 'MM/DD/YYYY') and to_date('01/13/2010', 'MM/DD/YYYY') ) or
       (p_date between to_date('01/19/2010', 'MM/DD/YYYY') and to_date('04/30/2010', 'MM/DD/YYYY') )
    then v_ret := 'N';
else
    v_ret := 'Y';
end if;
return v_ret;
end;
Wrote file afiedt.buf
1 with get_paid_unpaid as
2 (
3    select dt_from start_date, dt_to end_date, dt_from + level - 1 curr_date, test_ret_paid_unpaid(dt_from + level - 1) paid_unpaid,
4           row_number() over (order by dt_from + level - 1) rn_start,
5           row_number() over (order by dt_from + level - 1 desc) rn_end
6      from test_emp
7    connect by level <= dt_to - dt_from + 1
8 ),
9 get_stop_date as
10 (
11 select start_date init_date, end_date, curr_date, paid_unpaid,
12         case when paid_unpaid != lag(paid_unpaid) over (order by curr_date) or rn_start = 1 or rn_end = 1
13          then curr_date
14          else null
15         end start_date,
16         case when paid_unpaid != lead(paid_unpaid) over (order by curr_date) or rn_start = 1 or rn_end = 1
17          then curr_date
18          else null
19         end stop_date
20    from get_paid_unpaid
21 )
22 select period, paid_unpaid
23    from (
24 select init_date, curr_date, start_date, end_date, stop_date,
25         case when paid_unpaid = lead(paid_unpaid) over (order by curr_date)
26                then nvl(start_date, init_date) || ' - ' || lead(stop_date, 1, end_date) over (order by curr_date)
27              else null
28         end period,
29         paid_unpaid
30    from get_stop_date
31   where stop_date is not null or start_date is not null
32         )
33* where period is not null
12:06:10 SQL> /
PERIOD                                             PAID_UNPAID
01-JUL-08 - 01-JUL-09                              Y
02-JUL-09 - 25-JUL-09                              N
26-JUL-09 - 01-JAN-10                              Y
02-JAN-10 - 13-JAN-10                              N
14-JAN-10 - 18-JAN-10                              Y
19-JAN-10 - 30-APR-10                              N
6 rows selected.
Elapsed: 00:00:00.35

How to Calculate second between two dates?

I'm wish to create a ref ID using seconds between two dates as the uniue number. I usually use DateDiff function in VB to calculate the ref ID. But now instead developing using VB, i'm using java in developing my project. I wonder is there any class similar to the datediff function? Please advice.Thank you

diff_sec =( Date1.getSeconds() - Date2.getSeconds());

Duration between two date

Similar Messages

Maybe you are looking for