During Import if one record got failed so all records will not import?

Hi All,
I want to clear on the following situation:
I have 10 records in a file and due to 2 records some structural reason import got failed.. So do MDIS will import 8 records and create a file with two records in error folder? or it will not import at all and create a file in the error folder?
How does it works? basically I want to know if because of any reason 1-2 records in a 1000 records file got failed do entire file willnot import or only those errored records are not imported?
THanks
Rajeev

Hi Rajeev,
have 10 records in a file and due to 2 records some structural reason import got failed.. So do MDIS will import 8 records and create a file with two records in error folder? or it will not import at all and create a file in the error folder?
This totally depends on your business scenario,
1. If you want that if there are expection in even one file also all the records should not be imported than also it is possible
2. If you want that if the exception is there than only the exception records should be sent to the Exception Folder and rest of the records should be imported by MDIS service, this process is also possible.
For implementing the second scenario you just have to set the property in Console -> Admin -> Ports
Block on Structural Exception = No
And if you want that the files should not be imported even if one file has exception then set
Block on Structural Exception = Yes
Hope this would be helpful.
Best Regards,
Parul Malhotra

Similar Messages

P2 Card Spanned Clips will not import to FCP

First of all I'm not even really sure why all of my clips that are over 10 minutes say "spanned" but second of all they will not import to Final Cut Pro. When I do Log and transfer, it pretends like it is working but when it is finished all it gives me is a red "I did not work" exclamation point. Can Anyone Help me?

P2 cards are formatted with an offshoot of FAT32, which has a 4GB limit. So anything over 4GB, will be broken up into multiple parts.
#36 - One or More P2 files failed to import.
Shane's Stock Answer #36 - "One or more clips failed to import..."
Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.
Shane

Just installed Iphoto 6 and many photos will not import to Iphoto...

About half of my photos from one of my rolls from this Spring will not import into Iphoto6. I can open them up from my hard drive but they will not import into Iphoto. Any tips?
g4 tower Mac OS X (10.3.9)

Chris:
Even though you've gotten back up and running if you have any thumbnails that show up as blanks again try the following: download and run BatChmod on the iPhoto Library folder with the settings shown here, substituting your account name for mine. You can either type in the path to the folder or just drag the folder into that field.
The blank thumbnails after updating to v6 are often a result of permissions on the files getting messed up somehow preventing you from having access to them. Running BatChmod on the library folder as demonstrated will force the correct ownership and permissions on all of the files.
Do you Twango?

One album will not import to authorized computer

I have a Macbook and an iMac. Both are set up to share, both are authorized in iTunes under the Apple ID I've had for years. I make all purchases on the Macbook. Then I copy them over to my iMac by selecting the Macbook under "Shared," choosing "Show: items not in my library," and importing those songs to the iMac. I copy all purchases onto the iMac so I can delete rarely-listened-to songs/albums from the Macbook when space gets low, which is often.
There is one album that the iMac will not let me import. For each song from that one album, I get an error saying there's a problem downloading it, because "You do not have enough access priviledges for this operation. Please check that the connection to the network is active and try again."
The crazy thing is, my network connection is just fine; albums I purchased minutes before and after this one copied over fine. It's just this specific album that will not import. The summary pane for each of the album's songs look the same as all my other files: purchased AAC audio files, same bit rate, same sample rate, shows my name and Apple ID as the purchaser, same directory location on my computer, all files have the .m4a extension, ... nothing at all seems strange or unusual about this album's files.
Does anyone have a clue why this is happening and how to fix it? In the past month, I've imported close to 12,000 songs. This is the only album this has ever happened with.
P.S. If anyone's curious which album won't transfer, it's Beck's Sea Change, purchased October 2nd, 2012. Oddly enough, I originally purchased this album (from iTunes) in 2008, but in 2009 iTunes began saying it couldn't locate the files. I didn't delete them — they just up and disappeared. That's never happened with anything else before or since, either. It's as if there's something wrong with the files of this particular digital album.

Hello welcome to apple discussions,
Itunes does tend to "Mess Up" sometimes when Importing/adding by folder. what you first need to do is try adding each file by going to File>Add FILE to library in iTunes.
If you do this and get no error message or anything but the one file you just tried to add does not show in iTUnes, its one or the other, Either the tags are corrupt or the song itself is corrupt. iTunes tends to be more "Picky" on windows then other windows based programs.
You can test the tag issue by searching google or yahoo for a program called "TidyMP3". Just pick one song that will not go into iTUnes, use Tidy MP3 to "Strip" the ID3 tag off this test song and then try to add it to iTUnes. If it goes in you now know the issue and can use this program to strip all tags off your "Problem" MP3s.
If it doesn't theres something wrong with the song itself. I covered a similar issue before where the person had the songs in iTUnes but it wouldn't play because the song was corrupt and they seemed to come accross great programs for fixing this so heres the link to that post, you can overlook it and follow the links they provide http://discussions.apple.com/message.jspa?messageID=2487497#2487497

I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

Thank you for your suggestions. I downloaded a more recent version of Twain, but this didn't help. I also tried closing and opening Photo Shop and restarting my computer without success. Reinstalling Photo Shop sounds like a very promising solution, but I'm not sure I will do it. In the meantime I can scan items using a printer program. These scans open in Photo Shop. It is an extra step.

Aperture 2.1 will not import .crw from my Canon 300D Digital Rebel?

Hi
I am having problems with Aperture 2.1. I have a number of RAW files on my Canon 300D DSLR, which will not import into Aperture. Aperture recognises the camera and the photos via USB connection directly to the camera. However, when I click on import all (or for that matter if I attempt to import a single photo) I receive the following error box:
"Import From Capture Card Completed with Errors - 0 images have been imported into the project named "untitled project". - Aperture failed to import the 19 images listed below:"
It then list all of the images, for instance: CRW_0309.CRW.
I am almost certain that Aperture 2.1 is compatible with the Canon 300D and .crw files: does anyone have any idea why I am having problems? Please feel free to ask me any questions, which may help you to understand my issues.
This is my first post, sorry if I've done anything wrong.
Si

You might be onto something there nbirchler ... whilst I have not installed all the Canon software I have got the Canon remote capture installed ... but more to the point I have iPhoto, Aperture, Elements, Photoshop, FinepixViewer, Adobe DNG and various RAW developer type packages, as well as god knows what else lurking ... maybe one of these was interfering as I had not specified a default program to interface with my camera.
Does anyone know if there is a window (shouldn't use that word in Appleland really lol), or menu in OSX (perhaps in system preferences or something) for selecting the default image download software for your camera? I assume if you say 'yes' to iPhoto on bootup, or 'yes' to Aperture it must just tick a box somewhere in OSX ... wheres the box?
It would be useful to interface directly with OSX before I insert my camera and ensure I have the package I want to open selected.
Message was edited by: SimonSJP

IPhoto will not import certain JPG files

I have just migrated to a 2012 Retina 15" MacBook Pro from a 13" MBP. I am using Mavericks 10.9.1 and iPhoto 9.5.1. The MBP is a 2.7gHz quad core with 16GB of memory and a 768GB SSD. I was trying to tidy up my hard disc and import some .jpg files from the output folder on my Capture One Session. iPhoto will not import certain jpg files but will import others. The message I get is as follows The following file could not be imported. The file is an unrecognised format. Then shows below for example /Users/xxxx/Pictures/Capture One Session/Output/L1000212.jpg.
I first tried creating a new library and importing to that with no success. I then rebuilt the database. I repaired permissions. I deleted the iPhoto.plist and its caches and restarted - no success. I then deleted iPhoto and reinstalled from App Store after deleting the plist and caches again. Still no luck. The .jpg files in question open perfectly in Photoshop CC and Preview. I tried altering them slightly and resaving but still they would not import. I reinstalled Mavericks - no improvement. If I reconvert the files from the original DNG's into TIFF files, then they will import to iPhoto
Any ideas anyone?
Wilson

I just recorded an action in Photoshop CC to assign ProPhoto colourspace save and close. Then copied all the problem jpegs into a temp file and ran the action. With this super fast machine, It only took a few minutes to convert 500+ files and they have now all imported perfectly. I have changed my JPEG recipe to convert DNG's from embedded to ProPhoto.
Thanks again. Colourspace would never have occurred to me.
Wilson

Lightroom 4.1 will not import video from the Olympus OM-D EM-5

Lightroom 4.1 will not import video from the Olympus OM-D EM-5. It sees the files in the import dialog, but it fails during import.

Here's a post concerning 5D MKIII file corruption, which may also be due to a camera malfucntion. Yes, there could be something wrong with your camera.
http://forums.adobe.com/message/4882852#4882852
SUGGESTION:
Install the Canon EOS Utility that came with your camera. Also check for an updated version of the EOS Utility after the install. You need to install from the CD first before you can install any updates.
http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_5d_mark_iii#Driver sAndSoftware
If the EOS Utility can download the CR2 files to your hard drive, then your camera is not defective.

ITunes will not import mp4-files.

For some reason iTune will not import mp4-files into iTunes. The files only contain audio, no video. I know that mp4 is a format that combines the two.
The files were generated in an earlier version of iTunes, like in 2006 or something. They were imported from CD's. I can locate them just fine on my computer and they play without problem in Windows Media Player.
The problem is that when I try to import them the way that iTunes want me to import files its like they don't exist. ITunes locates the folders and sub-folders, but its like there's no content in the folders...
I've tried changing my import settings but nothing seems to help...
Have any of you encountered a similar problem, could you fix it and how?
I've contacted Apple-support but they were unable (incompetent) to assist me...
To me it seems like the only option left is to convert all the files, like 2 GB, from mp4 to mp3.
Thankful for any help I could get solving this ***** of an issue...
//Magnus

iTunes can handle just about any file format that works with QuickTime and will play any file purchased or downloaded from the iTunes Store. If you've got video files that end with a .mov, .m4v, or .mp4 file extension, you can import them to iTunes with ease. However, the video especially the MP4 video must meet the following specifications: it must be encoded as 540 kbit/s (minimum) MPEG-4 video (H.264) with an approximately 128 kbit/s AAC audio track or encoded as 1.5 Mbit/s (minimum) MPEG-4 video (H.264) with a minimum 128 kbit/s AAC audio track. If not, you will fail to import MP4 to iTunes.
Even if your MP4 files meet the above specifications and are added to iTunes successfully, it may still fail to sync to iOS devices. For iPhones, iPads, and video-capable iPods play videos in more specific video formats and codecs.
Here is a detailed guide to get iTunes unfriendly MP4 to iTunes
http://bigasoft.blogspot.com/2012/03/mp4-itunes-import-how-to-solve-cannot.html

Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Error workflow has been created successfully, but failed to publish and will not be listed in the Project Center

hello,
when i try creating projects in Project center am posted on with this error.
Your new XXXX workflow has been created successfully, but
failed to publish and will not be listed in the Project Center.For more information on the failure, visit the My Queue Jobs page or contact your administrator.
Any help would be appreciated!!!!!
Thanks regards, Vignesh.

hello Rouyre,
Thanks for ur reply
Am using
Microsoft Project Server 2013
15.0.4420.1017
Yes! It is Custom EPT with Custom Workflow(Declarative Workflow) built through VS2012
after associating the Site workflow with EPT i try creating Projects using my Custom EPT since then am posted on with this error.
ULS Error:Log
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
Standard Information:PSI Entry Point: <unknown> Project User: <unknown> Correlation Id: <unknown> PWA Site URL: SA Name: <unknown> PSError: <unknown> A queue job has failed. This is a general
error logged by the Project Server Queue everytime a job fails - for effective troubleshooting use this error message with other more specific error messages (if any), the Operations guide (which documents more details about queued jobs) and the trace log
(which could provide more detailed context). More information about the failed job follows. GUID of the failed job: 39cd36d6-3603-e411-b33e-00155d00091f. Name of the computer that processed this job: 3eebbc1d-7558-4050-bf5d-d985b23b89f5 (to debug further,
you need to look at the trace log from this computer). Failed job type: ReportWorkflowProj...
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03* Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
...ectDataSync. Failed sub-job type: ReportWorkflowProjectDataSyncMessage. Failed sub-job ID: 1. Stage where sub-job failed: (this is useful when one sub-job has more than one logical processing stages).
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fy Medium
Error is: GeneralQueueJobFailed. Details: Queue Attributes: 39cd36d6-3603-e411-b33e-00155d00091f 3eebbc1d-7558-4050-bf5d-d985b23b89f5 ReportWorkflowProjectDataSync ReportWorkflowProjectDataSyncMessage 1 2c1ea19c-5849-002d-b89f-50aaf0a752fd
. Standard Information: , LogLevelManager Warning-ulsID:0x000DD158 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Project Server Database
ah91z Medium
Successfully got the connection string (database name=[ProjectWebApp_Practice], id=1f6004ae-5d8a-41d2-81f9-e424a31484aa, type=Consolidated). Requested access level=ReadWrite: Data Source=XXXX;Initial Catalog=ProjectWebApp_Practice;Integrated Security=True;Enlist=False;Pooling=True;Min
Pool Size=0;Max Pool Size=100;Connect Timeout=15
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fz Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f type = ReportWorkflowProjectDataSync aborted at
Message 1, LogLevelManager Warning-ulsID:0x000DD159 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3f2 Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f correlation 82705dc5-3603-e411-b33e-00155d00091f
type = ReportWorkflowProjectDataSync failed at Message 1 Errors: GeneralQueueJobFailed, LogLevelManager Warning-ulsID:0x000DD15C has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
Thanks regards, Vignesh.

Iphoto will not import photos

iphoto 11 will see the pictures from digital media but will not import to mac. Any suggestions on a fix?

That was a test. It means you're old library needs to be repaired.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Lightroom will not import my photos. It did up to a week ago. I have changed cards and cameras (both worked two weeks ago). I can import the photos to Picasa and iPhoto

Lightroom will not import my photos. It did up to a week ago. I have changed cards and cameras (both worked two weeks ago). I can import the photos to Picasa and iPhoto. I get the following error message:
Some import operations were not performed.
The following files were not imported because they could not be read [followed by a list of the files I wanted to import]
Thumbnails show up. LR just will not import them.
Any idea what is going wrong?

If the Import button is not clickable, that means that Lightroom thinks you have no new photos to import (one possible reason is that they are duplicates)
So, you need to figure out why Lightroom thinks that. The way I would do this is to search your Library module for at least one of the photos, by file name. To do this, you would follow all 4 of these steps in sequence:
Click on All Photographs in the Catalog Panel on the left of the Library Module
Turn off all Filters (Ctrl-L or Cmd-L once or twice)
Expand all stacks: Photo->Stacking->Expand All Stacks
Search for one or more of the photos using the Filter Bar (press backslash), search by File Name

PSE 9 and 5 will not import - says the file already exists in the catalog !

I've already wasted 2 days looking for answers to this. When someone buys this program, at least half of the price is paying for the database in the Organizer - yet even John Ellis himself, who seems to know more than anyone about it, has gone to Lightroom. This is bad coding!!!
Upgraded from 5 to 9. If you read my previous posts, this took 2 days too, and phone help from a tech, because it would not install in my XP computer. It did upgrade the Organizer from 5, although many of the symbols are unusable and don't work to help me identify my tags. However, now I see that neither 5 nor 9 is able to look at a file and display thumbnails that are in it.
I move files around a lot for my business. Any half-way good database should be able to find the missing files, and also add any new images. Say I have 10 images in file A, then add 2 more to make 12. It can't see the added images! Says can't import, the file already exists in the catalog.
I tried: updating thumbnails, recover, repair, in both 5 and 9 - nothing works. to import the images that I can SEE in these folders! I read here that it will not import files if the same name is somewhere else. That alone is a problem. But I think it's more than that: even if the file used to be in another folder, folder B, it won't recognize that it's in folder A now!
Since PSE9 uses sql db, shouldn't that be better than 5 and be able to do simple tasks like this?
Any advice or similar experiences eagerly welcomed.

Thank you for replying, dj paiqe.
Do you mean the first little section that says photos may not be displaying? Yes, those just reveal hidden photos and are very basic. I did them.
I guess we disagree about databases and what they are designed to do, or maybe I didn't explain this well.
I did not move the images outside of the catalog: I move them to various folders, all already imported WITHIN the catalog, as I send them to various editors. (these are all drawings, not photos, and I do this professionally, so it needs to work).
Folder A and Folder B and Folder C have already been imported into the catalog. So if I move 2 images from folder B into folder A, the Organizer is simply lost, says image already exists, and everything is totally screwed up, as the image is no longer in folder B, and it can't find it in folder A!!! The problem is, unless I memorize the image name, say Image 9, I can't tell it to reconnect, as there is no longer an image in front of me! So there are 2 images, without names, now nowhere to be found. Inefficient, to say the least.
I've never tried Lightroom or Filemaker, but I cannot believe that they would lose data like this. I think it's the Folder coding that's not working in PSE, and I wanted this to work so badly!!!!!
I am willing to do it the PSE way, since you now have captions, keywords, etc, and it is a very powerful database, when it works. I understand that one is supposed to move images within the Organizer, obviously. But now many images are disconnected. I could start all over importing, but is there any way to do that without losing tags and categories?

After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version"

After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version". Any help will be greatly appreciated.

Sorry,
Yes, the error message is exactly like that ("Database error: failured to persist version")
No photos will import at all. I use USB to import from iPhone 5s or iPad 2.
About the difference? iPhoto and Photos . Are there two softwares?
I also will like to merge and/or synchronize all my photos I had saved to iCloud backups, Macbook Pro, iPhone 5s and iPad hard drives using iPhoto. It's call iPhoto library. At one point I turned off streaming.
Thanks again Larry HN.

During Import if one record got failed so all records will not import?

Similar Messages

Maybe you are looking for