During the Unicode conversion , Cluster table export taken too much time ap

Dear All
during the Unicode conversion , Cluster table export taken too much time approximately 24 hours of 6 tables , could you please advise , how can we reduse the time
thanks
Jainnedra

Hello,
Use latest R3load from market place.
also refer note
Note 1019362 - Very long run times during SPUMG scans
Regards,
Nitin Salunkhe

Similar Messages

Partition Table Query taking Too Much Time

I have created partition table and Created local partition index on a column whose datatype is DATE.
Now when I Query table and use index column in the where clause It is scaning all the table (Full scan) . The quey is :
Select * From mytable
where to_char(transaction_date, 'DD-MON-YY') = '01-Aug-07';
I have to use to_char function not to_date due to Front end application problem.

Before we go too far with this, if you manually query with TO_DATE on the variable instead of TO_CHAR on the column, does the query actually use the index?
The TO_CHAR on the column will definitely stop Oracle from using any index on the column. If the query will use the index if you TO_DATE the variable, as I see it, you have three options. First, fix the application problem that won't let you use TO_DATE from the application. Second, change the application to call a function returning a ref cursor, get the date string as a parameter to the function, and do the TO_DATE in the function.
Third, you could consider creating a function-based index on TO_CHAR(transaction_date, 'dd-Mon-yy'). This would be the least desirable option, particularly if you would also be selecting records based on a range of transaction_dates, since it loses a lot of information that the optimizer could use in devising an efficient query plan. It could also change your results for a range scan.
John

Still the report is taking too much time

Hi All,
When i refresh a webi report the report is taken too much time to refresh(open).
In back end i have checked all the connections, contexts, cardinalities, joins, conditions...etc, in webi i have enabled the the check box 'query stripping'.
but still the report is taking too much time, i didn't identified the problem?
Please help me on this.
Thanks in advance..

Hi Mark,
How many queries are there--2
How many rows are returned--- 2000+
Are all measures defined with aggregates-- Yes
What is the array fetch size? (I1000 if it isn't already)

Could you pls give the details about the Unicode conversion during Upgrade

Hi,
Can anyone give details about the Unicode conversion during SAP Upgradation fro 4.6C to ECC6.
Waiting for quick response
Best Regards,
Padhy

Hi,
These are the few points i gathered during my upgradation project.
Before starting any upgradation project, it is necessary to take up the back-up of the existing systems. As we are going to upgrade the entire system, we will be changing so many things and if something happens, without back-up, we will be in a trouble.
So it is advised to keep a back-up of the existing system.
Say for example we have the existing system E4B which is of Version 4.6C. Now we want to upgrade it to Version 4.7. Let us see how we can do it.
Version upgrades not only means that we need to run the new Version CD over the existing Version System but only involves some other thing.
Version Upgrade involves the following Steps.
Say we want to upgrade for Version 4.7 from Version 4.6, which is in the System E4B. Now we created one more system called as E1B in which the upgradation for Version 4.7 can be done.
First copy the entire E4B system into the E1B System which is created for Version 4.7.
Apply the Version 4.7 CD provided by SAP over the E1B System.
Now check whether all the functionalities that was in E4B system works fine with E1B system also.
Thus the Version Upgrade involves two steps.
1. SAP Upgradation with the help of the CD
2. Manual Upgradation.
1. SAP Upgradation with the help of the CD
This is nothing but after taking the copy of the existing system into a new system, the upgradation CD from SAP is applied over the new system.
2. Manual Upgradation.
This Manual Upgradation involves
2.1 Upgradation of Standard Objects
2.1.1 SPAU Objects
2.1.2 SPDD Objects
2.2 Upgradation of Custom Objects.
Upgradation of Custom Objects can be placed under the following three categories.
Unicode Compliance
Retrofit
Upgrade
Please Find below some of the common Unicode Errors and their solutions
1. Error:
In case of Translate Error; Dangerous use of Translate in Multilingual system.
Correction:
To correct the Error occurring on TRANSLATE statement use this additional statement before the Translate statement.
SET LOCALE LANGUAGE sy-langu.
This statement defines the Text Environment of all the programs & internal sessions in the language specified in the LANGUAGE KEY, which in this case is sy-langu, i.e. the log on language of the user.
2. Error:
In case of Open Dataset Error; Encoding Addition must be included.
Correction:
This Error occurs only when the MODE is TEXT.
To correct the Error occurring on OPEN DATASET statement use this statement instead.
OPEN DATASET dataset_name FOR access IN TEXT MODE ENCODING DEFAULT.
Where: dataset_name NAME OF THE DATASET.
Access INPUT or OUTPUT or APPENDING or UPDATE.
DEFAULT - Corresponds to UTF-8 in UNICODE systems &
NON_UNICODE in NON-UNICODE systems.
3. Error:
In case of the usage of the Obsolete FM UPLOAD/DOWNLOAD or WS_UPLOAD/DOWNLOAD; Function module UPLOAD is flagged as obsolete.
Correction:
The FM GUI_DOWNLOAD/UPLOAD is used.
The variations to be made in the parameters of the FM:
1. Filename It must be of STRING type.
2. Filetype DAT is not used any longer, instead ASC is used.
3. Field Separator The default value SPACE is used, incase for a TAB separated file X can be used.
4. Error:
In case of CURRENCY/UNIT Addition Error; Use addition CURRENCY/UNIT when outputting.
Correction:
The CURRENCY addition specifies the currency-dependant decimal places for the output of the data objects of type i or p. To obtain the currency-key, the field CURRKEY of the table TCURX is used. The system determines the number of the decimal places from the field CURRDEC of the selected CURRKEY.
To correct this error follow the following method:
WRITE: /3 'TOTAL',' ', TOTAL.
WRITE: /3 TOTAL, , TOTAL CURRENCY 2. --- Where 2is the Currency Key for Getting 2 decimal places.
5. Error:
In case of TYPE X Error; Variable must be of C, N, D, T or STRING type.
Correction:
We need to change all the Type X (Hexadecimal) variables to Type C with their values unchanged.
So the method to be followed is:-
1. Load the definition of the class CL_ABAP_CONV_IN_CE or CL_ABAP_CHAR_UTILITIES.
2. Declare the variable as Type C, and use the method UCCP(XXXX) of the class CL_ABAP_CONV_IN_CE where XXXX represents the 8-bit Hexadecimal value and incase the variable holds a Hex value for a Horizontal Tab , then the Attribute HORIZONTAL_TAB of the class CL_ABAP_CHAR_UTILITIES can be used directly instead of using the method UCCP.
E.g.:
i) *DATA: TAB TYPE X VALUE 09, Tab character
CLASS: CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
DATA TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
ii) * DATA: CHAR TYPE X VALUE 160.
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA CHAR TYPE C.
CHAR = CL_ABAP_CONV_IN_CE=>UCCP(00AO).
(Here 00A0 is the Hexadecimal equivalent of the decimal 160).
3. Incase the TYPE X Variable has a length more than 1, then an internal table must be created for the variable.
E.g.:
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA : LF(2) TYPE X VALUE 'F5CD'.
DATA : BEGIN OF LF,
A1 TYPE C,
A2 TYPE C,
END OF LF.
LF-A1 = CL_ABAP_CONV_IN_CE=>UCCP('00F5').
LF-A2 = CL_ABAP_CONV_IN_CE=>UCCP('00CD').
6. Error:
In case of the Character -Error; The Character -cant appear in names in Unicode Programs.
Correction:
The Character -(Hyphen) appearing in Variable names is replaced by the character _ (Under Score) for Unicode/Upgrade Compliance.
E.g.:
*wk-belnr LIKE bkpf-belnr,
*wk-xblnr LIKE bkpf-xblnr,
*wk-date LIKE sy-datum,
*wk-wrbtr LIKE bseg-wrbtr,
*wk-name1 LIKE lfa1-name1,
*wk-voucher(8) TYPE c.
wk_belnr LIKE bkpf-belnr,
wk_xblnr LIKE bkpf-xblnr,
wk_date LIKE sy-datum,
wk_wrbtr LIKE bseg-wrbtr,
wk_name1 LIKE lfa1-name1,
wk_voucher(8) TYPE c.
7. Error:
In case of The SUBMIT-TO-SAP-SPOOL Error; you should not use the statement SUBMIT-TO-SAP-SPOOL without the WITHOUT SPOOL DYNPRO addition.
Correction:
1. Declare variables of type PRI_PARAMS, ARC_PARAMS, and a variable of TYPE C which would be used as a VALID FLAG.
2. Call the FM GET_PRINT_PARAMETERS:
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
3. Use the SUBMIT-TO-SAP-SPOOL statement.
E.g.:
     submit zrppt500
     using selection-set 'AUTO3'
     with res_no eq lo_rsnum
     with sreserv in preserv
     to sap-spool destination p_dest
     immediately 'X'. "print immediate
DATA: print_parameters type pri_params,
archive_parameters type arc_params,
valid_flag(1) type c.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
Submit zrppt500
Using selection-set 'AUTO3'
With res_no eq lo_rsnum
with sreserv in preserv
to sap-spool
SPOOL PARAMETERS PRINT_PARAMETERS
ARCHIVE PARAMETERS ARCHIVE_PARAMETERS
WITHOUT SPOOL DYNPRO.
8. Error:
In case of Message Error; Number of WITH fields and number of Place Holders are not same .
Correction:
Split the statement after WITH into the same number as the place holder for that Message ID.
E.g.:
1. * MESSAGE E045.
MESSAGE E045 WITH '' ''.
2. in program ZIPI0801
     Start of change for ECC6
     message e398(00) with 'Could not find access sequence'
     'for condition type:'
     p_ptype.
message e398(00) with 'Could not find '
'access sequence'
'for condition type:'
p_ptype.
     End of change made for ECC6
9. Error:
In case of Move between 2 different Structures; The structures are not mutually convertible in a Unicode program.
Correction:
Make both the Data Types compatible and then assign the contents.
E.g.:
The statement move retainage_text to temp_text. Gives an error, where RETAINAGE_TEXT is an internal table and TEMP_TEXT is a string of length 200.
A Feasible solution for this is to specify from which position to which position of the string, the fields of RETAINAGE_TEXT should be assigned.
TEMP_TEXT+0(1) = RETAINAGE_TEXT-DQ1.
TEMP_TEXT+1(1) = RETAINAGE_TEXT-HEX.
TEMP_TEXT+2(20) = RETAINAGE_TEXT-FILLER1.
TEMP_TEXT+22(15) = RETAINAGE_TEXT-AMT_DUE.
TEMP_TEXT+37(8) = RETAINAGE_TEXT-TEXT.
TEMP_TEXT+45(10) = RETAINAGE_TEXT-DUE_DATE.
TEMP_TEXT+55(1) = RETAINAGE_TEXT-DQ2.
10. Error:
In case of no description found; add a GUI title.
Correction:
In this type of error gui title is generally missing so add a GUI title to the module pool.
11. Error:
In case of writing internal or transparent table
Correction:
Write individual fields.
E.g.:
WRITE: / EXT. --> EXT should be a character type field
WRITE: / EXT-ZZSTATE, EXT-LINE_NO, EXT-LINE_TXT, EXT-AMT, EXT-ZZSKUQTY.
12. Error:
In case of combination reference table/field S541-UMMENGE does not exist
Correction:
Was due to error in reference table S541. TABLE S541 has errors
1)Foreign key S541- ZZMARKET (ZZMARKET AND KATR2 point to different domains)
2)Foreign key S541-ZZACQUIGRP (ZZACQUIGRP AND KATR8 point to different domains)
Changed the domain of ZZMARKET (from ZMKCODE to ATTR2)
And that of ZMKCODE (from ZACCODE to ATTR8)
13. Error:
In case of KEY does not exist
Correction:
The reference table for field KBETR was KNOV earlier changed it to RV61A as KNOV was in turn referring to RV61A.
14. Error:
Incase of WRITE statement, Literals that take more than one line is not permitted in Unicode systems.
Correction: To correct this error, we need to align the spaces accordingly so that the statement doesnt go beyond the line.
15. Error:
Incase of Data statement, The data type ZWFHTML can be enhanced in any way. After a structure enhancement, this assignment or parameter might be syntactically incorrect..
Correction: To correct this error, instead of like in the Data statement, use type.
16. Error:
Incase of DESCRIBE statement, DESCRIBE can be used only with IN BYTE... Or IN CHARACTER mode in Unicode systems.
Correction: To correct this error, use additional text, IN BYTE MODE / IN CHARACTER MODE along with this statement.
CHARACTER MODE is added when the data object is of flat/ character type.
BYTE MODE is added when the data object is a deep structure.
Syntax: DESCRIBE FIELD data_obj : LENGTH blen IN BYTE MODE,
LENGTH clen IN CHARACTER MODE.
Where blen and clen must be of type I.
17. Error:
Incase of DO-LOOP Error, In Do loop range addition needed
Correction:
An internal tables is declared and the two fields (VARYING field and NEXT field) were
Included inside the internal table
E.g.: In program SAPMZP02
DO 11 TIMES
     VARYING STATION_STATE FROM STATION1 NEXT STATION2. ECC6
CASE SYST-INDEX.
WHEN 1
STATION_STATE = STATION1.
WHEN 2
STATION_STATE = STATION2.
WHEN 3
STATION_STATE = STATION3.
WHEN 4
STATION_STATE = STATION4.
WHEN 5
STATION_STATE = STATION5.
WHEN 6
STATION_STATE = STATION6.
WHEN 7
STATION_STATE = STATION7.
WHEN 8
STATION_STATE = STATION8.
WHEN 9
STATION_STATE = STATION9.
WHEN 10
STATION_STATE = STATION10.
WHEN 11
STATION_STATE = STATION11.
18. Error:
Incase of the parameter QUEUE-ID Error, QUEUE-ID is neither a parameter nor a select option in program rsbdcbtc.
Correction:
The parameter in program rsbdcbtc is QUEUE_ID and so is changed in this program
E.g.: In program Z_CARRIER_EDI_INTERFACE
     submit rsbdcbtc with queue-id = apqi-qid and return. "ECC6
     The parameter name changed by replacing '-' with '_' as in program rsbdcbtc "ECC6
Submit rsbdcbtc with queue_id = apqi-qid and return. "ECC6
19. Error:
Incase of EPC Error, Field symbol <TOT_FLD> is not assigned to a field .
Correction:
This error couldn't be rectified as the error occurs in a Standard SAP include- LSVIMF29.
The OS Note - 1036943 needs to be applied.
Error:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
Correct:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
Error:
Constants : c_tab type x value '09' .
Correct:
Constants : c_tab type abap_char1 value cl_abap_char_utilities=>horizontal_tab .
Error:
Data : begin of output_options occurs 0 . Include structure ssfcompop.
Data : end of output_options .
Correct:
Data : output_options type standard table of ssfcompop with header line .
Error:
PARAMETERS : NAST TYPE NAST .
Correct:
PARAMETERS : NAST TYPE NAST NO-DISPLAY .
Replace WS_DOWNLOAD and WS_UPLOAD by
GUI_UPLOAD and GUI_DOWNLOAD and check the import and export parameter types , do the changes accordingly. Because FILENAME paramater type is different because of this it will give dump.
For issue during Issue using SO_NEW_DOCUMENT_ATT_SEND_API1 Function module, the solution is After this FM we should put COMMIT WORK.
Issue:
Moving data from one structure to another structure if those two structures are not compatible
Solution:
we should use move-corresponding or field by filed we need to move it.
If database structures are different in 4.6c and ECC6.0,
Then we should go with append structure concept.
While testing the report if it gives dump at Select query level or any database or view level,then just goto that table or view and goto the data base utility(se14) adjust the database. But make sure that selected radio button in se14 transaction should be activate and adjust database
Also Check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
Reward points if helpful.
Regards,
Ramya

How to do the unicode conversion

hi,
How to do the unicode conversion while doing upgradtion.
regards
Raghava

Check this article:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1d5b8123-0a01-0010-90a7-f1c9622e3d89
Regards,
ravi

Livecache changes during SCM Unicode conversion

I am starting a unicode conversion of our SCM system which was just upgraded to 7.01. Before the conversion, our liveCache database was on a different host than our SCM system so we moved it to the same hardware. The process we used was to do a backup of the current liveCache, create a new instance on the new hardware and then do a restore of that liveCache from the original liveCache's backup.
For the Unicode conversion can we use this same process, but before restoring the liveCache, change the _UNICODE = 'YES' parameter for the liveCache? I read note 632357, but it didn't seem like that was neccessary, if I just created a new instance of liveCache where the SCM system target would land, changed the parameter and then did a restore from the backup?

Hello George,
1) The _UNICODE liveCache parameter should have the same value in the target liveCache instance as you have in the source liveCache instance, if you would like to do the
u201CHomogenous liveCache copy using backup/restoreu2019 using the SAP note:
457425 Homogenous liveCache copy using backup/restore
2) If you are planning to convert your system/liveCache to Unicode you have to follow all steps given in the SAP Note No. 632357.
3) If you have problems to follow the steps recommended in the SAP Note No. 632357, please create the SAP message to the component BC-DB-LCA, so we could discuss your issues in details.
Thank you and best regards, Natalia Khlopina

Should modifiable transports be released before the unicode conversion?

We are getting started on the unicode conversion soon in our DEV environment. Should we go ahead and release the open/modifiable transports before the conversion? IS there a reason for that? Since this is unlike an SAP upgrade, can we release them later after the conversion is complete. Any insight?
Thanks.

Hi,
I Suppose its not must , as i have done lot of language import with open transport request.
http://help.sap.com/saphelp_nw70/helpdata/en/a3/30ad5296b511d384bb0060975b04f3/frameset.htm
This one will help
Note 18601 - Frequently asked questions on language transport
Regards,
Edited by: Gagan Deep Kaushal on Nov 2, 2010 8:34 PM

When i try to do a software update, it finishes and then says that the update cannot be saved because it has probably been corrupted during the download. This has happened a number of times and i do not know why, any help?

When i try to do a software update, it finishes and then says that the update cannot be saved because it has probably been corrupted during the download. This has happened a number of times and i do not know why, any help?

asifmanzoor wrote:
i have 10.7.2, this download is 10.7.5
Are you Downloading it from here > http://support.apple.com/kb/dl1582
asifmanzoor wrote:
yes, i am using wifi
1) Turn your Wi-Fi router OFF... wait 30 seconds... Turn it back ON.
OR...
Do not use Wi-Fi and connect Directly to your Internet via ethernet cable.

The queries takes too much time

Hi,
I want to compare time of queries between Spatial and PostGIS, but Spatial take too much time. I created spatial indexes in both databases so I have no idea where can be the problem :-(. I'm actually student and I try this for my essay, but I start with Oracle by myself so I'll appreciate some help.
I have table with cca 7000 polygons and I want to create new table like dissolve these polygons by attribute katuze.
Query in Spatial takes 8506 s :
CREATE TABLE dp_diss_p AS
SELECT KATUZE_KOD, SDO_AGGR_UNION(
MDSYS.SDOAGGRTYPE(a.geom, 0.005))GEOM
FROM dp_plochy a GROUP BY a.KATUZE_KOD;
Query in PostGIS takes 10.149 s :
CREATE TABLE plochy_diss AS
SELECT st_union(geom) AS geom
FROM plochy
GROUP BY katuze_kod;
I really don't know what to do, please give somebody me some advice :-(. Please excuse my English.
Thx Eva

I tryed use the sdo_aggr_set_union like this:
CREATE OR REPLACE FUNCTION get_geom_set (table_name VARCHAR2,
column_name VARCHAR2,
predicate VARCHAR2 := NULL)
RETURN SDO_GEOMETRY_ARRAY DETERMINISTIC AS
type cursor_type is REF CURSOR;
query_crs cursor_type ;
g SDO_GEOMETRY;
GeometryArr SDO_GEOMETRY_ARRAY;
where_clause VARCHAR2(2000);
BEGIN
IF predicate IS NULL
THEN
where_clause := NULL;
ELSE
where_clause := ' WHERE ';
END IF;
GeometryArr := SDO_GEOMETRY_ARRAY();
OPEN query_crs FOR ' SELECT ' || column_name ||
' FROM ' || table_name ||
where_clause || predicate;
LOOP
FETCH query_crs into g;
EXIT when query_crs%NOTFOUND ;
GeometryArr.extend;
GeometryArr(GeometryArr.count) := g;
END LOOP;
RETURN GeometryArr;
END;
CREATE TABLE dp_diss_p AS
SELECT KATUZE_KOD, sdo_aggr_set_union (get_geom_set ('dp_plochy', 'geom','CTVUK_KOD <>''1'''), .0005 ) geom
FROM dp_plochy a GROUP BY a.KATUZE_KOD;
It takes 21.721 s, but it return type of collection and I can't export it to *.shp because Georaptor export it like 'unknown' . Has anybody idea what can I do with it to export it like polygon?
Eva

R3load ttaking too much time when table REPOSRC is loaded

Hello,
I am installing the SAP ECC 6.0 SR2 on SUN Solaris 10 on DB2 V9.1. 17 jobs of the 19 have been completed in ABAP Import phase but it is taking too much time while doing this SAPSSEXC. It is running aroung 10 hours. There is no error is giving. So I have canceled the SAP Installation. After that I have started through manual OS command
/sapmnt/<SID>/exe/R3load -dbcodepage 4102 -i /<instdir>/SAPSSEXC.cmd -l /<instdir>/SAPSSEXC.log -stop_on_error -merge_bck
It is also running around 9 hours. I do not why it is happening and when it will be completed.
Can you help me what will check for doing this job fast or can help me how to resolve this issue?
I have checked these SAP notes 454368 and 455195
If i change any DB2 parameter, I have to restart the DB2 Database. What will I do? I can not understand what to do now.
Please help me ASAP.
Thanks
Gautam Poddar

Hello,
running the R3load import step manually you might try to add the option
-loadprocedure fast LOAD
Pay attention to write the LOAD in capital letters!
This will invoke the LOAD-API whenever possible.
This should save some time on "normal" tables without LOB-columns.
For your table REPOSRC that has a BLOB column the LOAD-API will not be taken.
So I am sorry this will not work for your special case.
(Thanks for the hint to Frank-Martin Haas)
Kind regards
Waldemar Gaida
Edited by: Waldemar Gaida on Jan 10, 2008 8:26 AM

Delta Sync taking too much time on refreshing of tables

Hi,
I am working on Smart Service Manager 3.0. I have come across a scenario where the delta sync is taking too much time.
It is required that if we update the stock quantity then the stock should be updated instantaneously.
To do this we have to refresh 4 stock tables at every sync so that the updated quantity is reflected in the device.
This is taking a lot of time (3 to 4 min) which is highly unacceptable from user perspective.
Please could anyone suggest something so that only those table get refreshed upon which the action is carried out.
For eg: CTStock table should get refreshed only If i transfer a stock and get updated accordingly
Not on any other scenario like the changing status from accept to driving or any thing other than stocks.
Thanks,
Star
Tags edited by: Michael Appleby

Hi fiontan,
Thanks a lot for the response!!!
Yeah!! I kow it's a lotta code, but i thought it'd be more informative if the whole function was quoted.
I'm in fact using the PrintWriter to wrap the BufferedWriter but am not using the print() method.
Does it save any time by using the print() method??
The place where the delay is occurring is the wile loop shown below:
            while(allitems.hasMoreElements()){
            String aRow = "";
                XDItem item = (XDItem)allitems.nextElement();
                for(int i =0 ; i < props.length; i++){
                     String value = item.getStringValue(props);
     if(value == null || value.equalsIgnoreCase("null"))
          value = "";
                         if(i == 0)
                              aRow = value;
                         else
                              aRow += ("\t" + value);
startTime1 = System.currentTimeMillis();
System.out.println("time here is--before-writing to buffer --out.flush() done: " +startTime1);
bufferWrt.write(aRow.toCharArray());
out.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.newLine();
startTime2 = System.currentTimeMillis();
System.out.println("time here is--after-writing to buffer : " +startTime2);
What exactly happens is that after a few loops it just seems to sleep for around 20 seconds and then again starts off and ............it goes on till the records are done.
Please do lemme know if you have any idea as to why this is happening !!!!! This bug is giving me the scare.
thanks in advance

Report taking too much time in the portal

Hi freiends,
we have developed a report on the ods,and we publish the same on the portal.
the problem is when the users are executing the report at the same time it is taking too much time.because of this the perfoemance is very poor.
is there any way to sort out this issue,like can we send the report to the individual user's mail id
so that they can not log in to the portal
or can we create the same report on the cube.
what could be the main difference if the report made on the cube or ods?
please help me
thanks in advance
sridath

Hi
Try this to improve performance of query
Find the query Run-time
where to find the query Run-time ?
557870 'FAQ BW Query Performance'
130696 - Performance trace in BW
This info may be helpful.
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memory will decrease the loading time of the report.
Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
performance ISSUE related to AGGREGATE
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
202469 - Using aggregate check tool
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
6
Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Assign points if useful
Cheers
SM

Sun cluster 3.2 - resource hasstorageplus taking too much time to start

I have a disk resource called "data" that takes too much time to startup when performing a switchover. Any idea what may control this ?
Jan 28 20:28:01 hnmdb02 Cluster.Framework: [ID 801593 daemon.notice] stdout: becoming primary for data
Jan 28 20:28:02 hnmdb02 Cluster.RGM.rgmd: [ID 350207 daemon.notice] 24 fe_rpc_command: cmd_type(enum):<3>:cmd=<null>:tag=<hnmdb.data.10>: Calling security_clnt_connect(..., host=<hnmdb02>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<0>, ...)
Jan 28 20:28:02 hnmdb02 Cluster.RGM.rgmd: [ID 316625 daemon.notice] Timeout monitoring on method tag <hnmdb.data.10> has been resumed.
Jan 28 20:34:57 hnmdb02 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_prenet_start> completed successfully for resource <data>, resource group <hnmdb>, node <hnmdb02>, time used: 23% of timeout <1800 seconds>

heldermo wrote:
I have a disk resource called "data" that takes too much time to startup when performing a switchover. Any idea what may control this ?I'm not sure how this is supposed to be related to Messaging Server. I suggest you ask your question in the Cluster forum:
http://forums.sun.com/forum.jspa?forumID=842
Regards,
Shane.

ACCTIT table Taking too much time

Hi,
In SE16: ACCTIT table i gave the G/L account no after that i executed in my production its taking too much time for to show the result.
Thanku

Hi,
Here iam sending details of technical settings.
Name                 ACCTIT                          Transparent Table
Short text            Compressed Data from FI/CO Document
Last Change        SAP              10.02.2005
Status                 Active           Saved
Data class         APPL1   Transaction data, transparent tables
Size category      4       Data records expected: 24,000 to 89,000
Thanku

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

stop the download if it's stalled, and restart your download.

During the Unicode conversion , Cluster table export taken too much time ap

Similar Messages

Maybe you are looking for