DVT: Master-Detail Bar Graph

Hi,
JDev Version: 11.1.1.5.0
I am using ADF DVT Bar Graphs to show the details of Master-Detail Tables. I found one useful sample at: http://www.oracle.com/technetwork/developer-tools/adf/learnmore/057-dvt-master-detail-172847.pdf by Frank. This example contains Master as a Bar Graph and on clicking a particular Bar refreshes the detail table with corresponding detail content.
I would like to have a similar behavior but the detail table should be another Bar Graph instead of a table. Can some one let me know or share some example to show how to have master-detail relationship with two bar graphs?
Thanks in advance
Rathnam

Hi,
creating an m-d begavior is quite simple:
1) drag the parent collection (e.g. Departments) as a bar graph to a page
2) Select the checkbox to set the selected pie as the current row
3) drag and drop the dependent collection (e.g. Employees) as another graph
4) either set changeEventPolicy=ppr in the PageDef file for the Employee Iterator or
set the PartialTriggers property of the detail graph component to point to the parent
Frank

Similar Messages

How do I find out what "Other" is, in the "About this Mac", storage details bar graph?

My new Mac Book Pro with 250 GB Flash Storage is already full with only adding a few apps. I purchased the new Final Cut Pro X, but store all video data on an external drive. Whats up? Why is 146 GB used up with "Other"? What is "Other!?" How can I find out the details of what's in other, and get rid of what I don't want or use?

First, empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

ADF DVT: Stack Bar Graph unable to display all Bar.

Hi Experts,
I'm currently having a problem displaying bar graphs in my Use Case.
There are unavoidable instance that at some point of the information provided, there may be part that contain a very huge data.
Below is my sample code.
In the example code below only the detail with huge data is rendered in the graph. and the rest are not rendered. is this a known issue?
screenshot: http://sdrv.ms/13DXeyn.
I'm using ADF PS6 in windows7(64bit), Chome browser.
ManagedBean. This bean contains static data for testing only. Notice how big the data in the 2nd to the last detail.
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.ArrayList;
import java.util.Date;
import java.util.List;
import javax.faces.event.AbortProcessingException;
import oracle.adf.view.faces.bi.component.graph.UIGraph;
import oracle.adf.view.faces.bi.event.TimeSelectorEvent;
public class GraphTimeAxisManagedBean {
    SimpleDateFormat stdFormat = new SimpleDateFormat("yyyy-MM-dd-HH.mm.ss");
    public List getTabularData() {
        ArrayList list = new ArrayList();
        try {
          list.add(new Object[] { new Date(stdFormat.parse("2010-06-18-00.00.00").getTime()),"", new Double(0) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-06-18-00.00.00").getTime()),"description 1", new Double(20) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-06-18-00.00.00").getTime()),"description 2", new Double(50) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-06-18-00.00.00").getTime()),"description 3", new Double(30) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-07-01-00.00.00").getTime()),"", new Double(0) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-07-01-00.00.00").getTime()),"description 1", new Double(150) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-07-01-00.00.00").getTime()),"description 2", new Double(240) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-07-01-00.00.00").getTime()),"description 3", new Double(10) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-08-01-00.00.00").getTime()),"", new Double(0) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-08-01-00.00.00").getTime()),"description 1", new Double(60) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-08-01-00.00.00").getTime()),"description 2", new Double(80) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-08-01-00.00.00").getTime()),"description 3", new Double(10) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-09-01-00.00.00").getTime()),"", new Double(0) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-09-01-00.00.00").getTime()),"description 1", new Double(90) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-09-01-00.00.00").getTime()),"description 2", new Double(50) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-09-01-00.00.00").getTime()),"description 3", new Double(80) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-10-01-00.00.00").getTime()),"", new Double(0) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-10-01-00.00.00").getTime()),"description 1", new Double(10) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-10-01-00.00.00").getTime()),"description 2", new Double(90) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-10-01-00.00.00").getTime()),"description 3", new Double(80) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-11-01-00.00.00").getTime()),"", new Double(0) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-11-01-00.00.00").getTime()),"description 1", new Double(200) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-11-01-00.00.00").getTime()),"description 2", new Double(20) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-11-01-00.00.00").getTime()),"description 3", new Double(70) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-12-01-00.00.00").getTime()),"", new Double(0) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-12-01-00.00.00").getTime()),"description 1", new Double(60) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-12-01-00.00.00").getTime()),"description 2", new Double(80) });
          list.add(new Object[] { new Date(stdFormat.parse("2010-12-01-00.00.00").getTime()),"description 3", new Double(10) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-01-01-00.00.00").getTime()),"", new Double(0) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-01-01-00.00.00").getTime()),"description 1", new Double(90) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-01-01-00.00.00").getTime()),"description 2", new Double(80) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-01-01-00.00.00").getTime()),"description 3", new Double(70) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-02-01-00.00.00").getTime()),"", new Double(0) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-02-01-00.00.00").getTime()),"description 1", new Double(60) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-02-01-00.00.00").getTime()),"description 2", new Double(80) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-02-01-00.00.00").getTime()),"description 3", new Double(30) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-03-01-00.00.00").getTime()),"", new Double(0) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-03-01-00.00.00").getTime()),"description 1", new Double(203)});
          list.add(new Object[] { new Date(stdFormat.parse("2011-03-01-00.00.00").getTime()),"description 2", new Double(90)});
          list.add(new Object[] { new Date(stdFormat.parse("2011-03-01-00.00.00").getTime()),"description 3", new Double(70)});
          list.add(new Object[] { new Date(stdFormat.parse("2011-04-01-00.00.00").getTime()),"", new Double(0) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-04-01-00.00.00").getTime()),"description 1", new Double(75) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-04-01-00.00.00").getTime()),"description 2", new Double(86) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-04-01-00.00.00").getTime()),"description 3", new Double(99) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-05-01-00.00.00").getTime()),"", new Double(0) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-05-01-00.00.00").getTime()),"description 1", new Double(60105) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-05-01-00.00.00").getTime()),"description 2", new Double(50309) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-05-01-00.00.00").getTime()),"description 3", new Double(50210) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-06-01-00.00.00").getTime()),"", new Double(0) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-06-01-00.00.00").getTime()),"description 1", new Double(80) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-06-01-00.00.00").getTime()),"description 2", new Double(77) });
          list.add(new Object[] { new Date(stdFormat.parse("2011-06-01-00.00.00").getTime()),"description 3", new Double(99) });
        } catch (ParseException e) {
        return list;
JSFF (UI Page).
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:dvt="http://xmlns.oracle.com/dss/adf/faces"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<af:panelGroupLayout id="pgl1">
    <dvt:graph id="barGraph1" graphType="BAR_VERT_STACK" shortDesc="testing"
               inlineStyle="width:800px; height:300px;"
               tabularData="#{pageFlowScope.GraphTimeAxisManagedBean.tabularData}">
      <dvt:background>
        <dvt:specialEffects/>
      </dvt:background>
      <dvt:graphPlotArea/>
      <dvt:seriesSet>
        <dvt:series/>
      </dvt:seriesSet>
      <dvt:o1Axis/>
      <dvt:y1Axis/>
      <dvt:legendArea automaticPlacement="AP_NEVER"/>
    </dvt:graph>
</af:panelGroupLayout>
</jsp:root>
Thanks,
achie

Achie,
This is not an issue with the graph as such, but the data issue. Since the value of the data that is being displayed is huge and other datas are relatively very small to occupy the graph area (Ex : 60105 Vs 10).
You may want to try implementing zoomListener and/or zoomScrollListener for the graph to zoom and see the small datas.
&lt;dvt:graph&gt;
-Arun

TabularData for DVT Stack bar Graph

Dear All,
I used tabulardata to supply value fro my stack bar graph component and I used the code below
public class Stackbar
public List getTabularData()
    ArrayList list = new ArrayList();
    String[] rowLabels = new String[]
      { "Dry Goods", "Wet Goods", "Misc Goods" };
    String[] colLabels = new String[]
      { "May 2009", "June 2009", "July 2009" };
    Double[][] values = new Double[][]
        { 50000d, 122000d, 175000d },
        { 90000d, 110000d, 150000d },
        { 65000d, 50000d, 95000d }};
    for (int c = 0; c < colLabels.length; c++)
      for (int r = 0; r < rowLabels.length; r++)
        list.add(new Object[]
            { colLabels[c], rowLabels[r], new Double(values[r][c]) });
    return list;
}JSF is simple
<dvt:barGraph id="barGraph1" subType="BAR_VERT_STACK2Y" shortDesc="Sample bar"
                          tabularData="#{viewScope.stackBarBean.tabularData}">
              <dvt:background>
                <dvt:specialEffects/>
              </dvt:background>
              <dvt:graphPlotArea/>
              <dvt:seriesSet>
                <dvt:series/>
              </dvt:seriesSet>
              <dvt:o1Axis/>
              <dvt:y1Axis/>
              <dvt:y2Axis/>
              <dvt:legendArea automaticPlacement="AP_NEVER"/>
            </dvt:barGraph>But I am not able to have a stack bar graph and the data isnt stacking..
Kindly see the image here http://imageshack.us/photo/my-images/831/stackbar.jpg/
My playground code can be downloaded here...
http://code.google.com/p/my-dev-projects/downloads/detail?name=PlayGround.zip&can=2&q=
How do I formulate the tabular data values correctly so that I could achive the correct stack bar graph component
Thanks.
JDEV 11.1.1.6

Well...found the solution myself...
Kindly disregard please..thanks

Master Detail Link Between Hierarchy column and graph

Hi all,
I have created report using hierarchy columns of project dimension.
Project total -> Project Group -> Project subgroup ->Project Name
When I click Project Group of hierarchy column , Graph has to change with respect to that column.
Help me as soon as possible.
Thanks in advance,
Haree.
Edited by: Haree on Mar 21, 2012 6:57 PM

Hi,
Check if you are using the following types of views for the detail views:
-Graph
-Funnel graph
-Gauge
-Table
-Pivot table
A detail view:
-Can listen for master-detail events from multiple master views
-Can be in the same analysis as the master view or in a different analysis
-Cannot act as a master to another view
NOTE: Please mention if this resolved your problem/still facing and close the thread to assist others with similar problems.
Regards,
MuRam

Pagination on ADF DVT Bar graph

Hi
I am using ADF 11.1.1.5. I am trying to do pagination on dvt bar graph component. The pagination is like << 1 2 3 >>. The default range size in page definition is suppose 5.The things are working fine on all links except 2. I get 1-5 record on first link. On 3 its 11-15 and so on. But n 2 i get 1-5 only. I am using setRangeStart() and setRangeSize methd to get next record. If range size is 6 then on firsti get 1-6, on 3 its 13-18 but 2 doesn't works. The range is setting only from one place. So nothing seems wrong in code. Please suggest.
Thanks

Hi,
the easiest way to build pagination in is
1. Drag the bar graph onto a page
2. On the PageDef file, change the RangeSize property to 5 (in your case)
3. From the DataControl panel, drag and drop the NextSet and PreviousSet operations of the View Object
4.Configure the af:graph PartialTriggers property to point to the two buttons
5. Ensure the buttons have their PartialSubmit property set to "true"
Its not identical to having index icons, but its declarative and works out of the box
Frank

Adf Dvt bar graph zoom/scrolling to given zoom level

Hi,
I am developing a dashboard, where I need a functionality with bar graph, that will zoom bar graph at particular zoom level while loading.
Please help me, How can I pass zoom level to bar graph to zoom in at loading time?
Thanks,
Jassi

Thanks Vlad for response,
<dvt:barGraph id="barGraph" subType="BAR_VERT_STACK" shortDesc="Query Result Graph"
tabularData="#{demo.graphTabularDate}" seriesRolloverBehavior="RB_HIGHLIGHT"
animationOnDisplay="auto" animationOnDataChange="alphaFade"
dynamicResize="DYNAMIC_SIZE" imageFormat="AUTO" visualEffects="AUTO"
binding="#{demo.graph}">
<dvt:o1Axis scrolling="on" /> 
<dvt:legendArea scrolling="asNeeded" automaticPlacement="AP_NEVER" position="LAP_RIGHT" />
<dvt:o1TickLabel tickLabelSkipMode="TLS_AUTOMATIC"/>
</dvt:barGraph>

Programmatically create a bar graph (ADF DVT) at run time...

Can someone show me how to programmatically create a bar graph (ADF DVT) at run time..
Thanks in advance.
Minh

Hi Briston,
You can make the column selected by setting "selected" property of column to true
Sireesha

Command link at DVT Horizantal Bar Graph

Hi All,
I want to display command link in the place of y-axis in Horizantal Bar Graph.
I am using jdev 11.1.1.6 version
Please provide me suitable answer with proper sample code.
Thanks,
Sai

Hi,
the proper answewr is that you cannot have a command link in a graph. However, graphs respond to click events and you can define a click listener that then allows you to access the clicked on value.
http://www.jobinesh.com/2010/11/example-of-clicklistener-implementation.html
Frank

Clarification on Master - Detail events usage on OBIEE 11g dashoards

Hi ,
Can Master - Detail events feature be used within two different analysis on dashboard ?
If yes , please let me know how .
If no , are there any alternatives for the below requirement :
1. I have a pivot table consisting of one dimension hierarchy (region) against revenue measure .
2. And one Bar graph , showing data on quater & region basis revenue .
Now by clicking one of the dimesion members (INDIA,USA) of region hierarchy , the bar graph will get changed accordingly .
For example , if by default it is total region and "new york" under USA region is clicked then the bar chart will change accordingly .
Thanks

Thanks for the link veeravalli !!
I don't want the user to navigate to any content , so can't use action links .
However , Can u please let me know whether this master detail event will work on different analysis (not from the same report views , i.e a between a pivot table view from report A and a bar chart report view from report B ) ?
Thanks

How to create drilldown bar graph using clicklistener

Hi,
I have a view object that sums some data and tags each sum accordingly - eg sum salary grouped by department name.
I display this using a horizontal bar graph.
I want to now be able to click on a bar and then have the details displayed in a table. I am led to believe from chapter 24 of the manual it is possible to do using no java coding (ie not having to create a bean etc).
You can use the row selection listener of a graph (which serves as a master view) to enable clicks on a bar, slice, or other graph data element to update the data in another ADF component (which serves as a detail view). For example, a click on a bar that represents sales for a given product in a graph might cause the display of the detailed sales data related to the product in a pivot table.
The following requirements must be met to achieve this master-detail processing declaratively:
1. You must use the same tree data control to provide data for both views as follows:
1. Bind the graph as a row set to one level in the data control.
HOW ?
2. Bind the other ADF view (such as a table or pivot table) to a lower level in the tree data control.
I don't have a nested iterator - is it saying to use a master-detail scenario like dept/emp ?
2.
Set a value for the clickListener attribute of the graph tag in the Behavior page of the Property Inspector and use the processClick method that is already part of the graph binding.
For example, if the value attribute of the graph tag is value="#{bindings.myGraph.graphModel}", then the clickListener attribute should be clickListener="#{bindings.myGraph.graphModel.processClick}".
3. Ensure that the partialTriggers attribute on the parent tag for the detail component is set correctly. It should be set to the ID of the graph component.
You do not have to write Java code for handling clicks on data elements in the graph. The processClick event on the graph binding recognizes click events on data component in a graph and performs the necessary processing.
Are they suggesting all you need to do is ensure you have proper master-detail tables set up and it will automatically work ?
cheers
Edited by: Dom Klein on May 27, 2009 8:06 PM

Hi Frank,
thanks for replying. I opened a TAR about this as I cannot produce a drilldown table. I created a VO with my summary - eg
select decode(manager_id, 100, 'fred',
123, 'bill', 120, 'kate', 121, 'julia', 147, 'ken', 108, 'james', 148, 'liz',
149, 'phil', 205, 'jack', 102, 'eric', 'dominic') manager_name, sum(salary) as salaries
from employees
GROUP BY
decode(manager_id, 100, 'fred',
123, 'bill', 120, 'kate', 121, 'julia', 147, 'ken', 108, 'james', 148, 'liz',
149, 'phil', 205, 'jack', 102, 'eric', 'dominic')
Then I created a detail view object (from HR.employees) and added a calculated column :
SELECT Employees.EMPLOYEE_ID,
Employees.FIRST_NAME,
Employees.LAST_NAME,
Employees.EMAIL,
Employees.PHONE_NUMBER,
Employees.HIRE_DATE,
Employees.JOB_ID,
Employees.SALARY,
Employees.COMMISSION_PCT,
Employees.MANAGER_ID,
Employees.DEPARTMENT_ID,
decode(manager_id, 100, 'fred',
123, 'bill', 120, 'kate', 121, 'julia', 147, 'ken', 108, 'james', 148, 'liz',
149, 'phil', 205, 'jack', 102, 'eric', 'dominic') AS manager_name
FROM EMPLOYEES Employees
I create a new viewlink which links on manager_name. When I run the bc4j appmodule I can see the correct master-detail relationship. IF I drag a master-detail table onto the page it works fine.
Now if I create a graph using the master and then create a table using the detail I can't get it to use this relationship even after setting the processClick() and the id for the graph set on the partial trigger of the table. Any ideas ?
cheers

OBIEE 11g: Inconsistencies with Master-Detail events and Navigate to BI

Hi everyone,
I'm getting some pretty annoying inconsistencies with the Navigate to BI Content action as well as the Master-Detail events. Basically the main issue I get is that 90% of the time, the click does nothing.
It's a pretty simple setup, I am setting up bulb gauges to act like a fancy column selector. The bulb gauges are setup to pivot based on a Metric Type column. The goal is that if you click on "Metric 1" bulb a trend report should refresh to show Metric 1. If you click on the "Metric 2" bulb, the same trend report will show that metric.
Here's how I implemented it:
Dashboard Tab A -- Uses Navigate to BI Content
1) I have a prompt on Fiscal month in dashboard tab A.
2) I created the bulb gauge and put it in dashboard tab A
3) Setup the interaction on the bulb measure to navigate back to Dashboard Tab A.
3) Prompted the trend on Metric Type column and put it in dashboard tab A.
4) In theory, clicking on the bulb, should navigate back to the same tab and update the trend report appropriately
5) In reality, nothing happens.
6) The only way I can get the navigate to work is if I first change the value in the fiscal month prompt and click Go. Then I click on the bulb and the navigation will work ONCE. After that it's broken again.
Dashboard Tab B -- Use Master Detail -Events
1) Pretty much same situation as dashboard A, but instead of navigate to BI Content, I use the master-detail events.
2) Pretty much the same results. I cannot get it to consistently work, in fact the trick with the filter didn't do anything.
3) One thing I tried was cleared my browser history completely (Mozilla Firefox) and then launched the page. It work for about 5 clicks and then stopped.
Either way, neither of these are working properly for me.
Has anyone else had these issues?
-=Joe
Has anyone else had an issue with this?

So someone explained to me that master-detail events only occur within a single report. They cannot be used to communicate across two different reports.
That is significantly less useful than I originally thought. I honestly that it was a method of communication for one report to update other target reports that are all listening on the same channel. That would have been a powerful feature. A single report refreshing other views in the same report is still useful, but not as much.
That being said, I still don't understand what the heck is going on with the navigate to BI content feature. I've been testing it out. It works with pivot tables and regular tables. But the moment I add a graph, gauge or even a "Filter" view into the dashboard page, the click stops working. Really really strange stuff.

Obiee 11g - Master/detail : How to initialize details ?

Hi gurus,
I'm using the last version of obiee.
I have a dashboard with master/detail. The master/details are working great when I click on cells.
But I have some "initialization" problems.
- master/detail with a prompt list on the master table
a change on the list won't initialize the detail. I would like to have the detail refreshed with the first row of the master.
- master/detail with different order by on master and detail
the initialization value of the detail does not fit with the first row of the master.
Is it possible to achieve this ?
Thanks in advance for your help.
Emmanuel

Hi Dpka,
Thanks for sharing your view . I ,even observe the same 'error' message returining false value at the bottom-left of my browser when set up the Master detail even and clicked my table column to reflect the value in the graph .
But my situation is bit tricky . I can't expose two different views to see if separating the interaction works well or not . In my case I have only 1 report with 4 compound layout(with pivot table(master) and Graph(detail)) having view selector . So this is practically not separable as this incurs loss of other functionalities.
Do you have any suggestion in mind . I tried to see Supportweb and doesn't have any valid bug reported :(
Rgds,
DxP

Can I link from Interactive report Page 1 to Master Detail page 2?

Hi folks-
I know how to create a Page as an Interactive Report; it creates 2 pages automatically (primary page with the great interactive bar) and a 2nd page that's a single record.
I know how to create a Page as Master Detail, whereby I get a tabular list without the super interactive bar, and I can select a record, and get transported to a nice page with 2 regions (master on top, detail on bottom).
I want to have the First page from the Interactive Report, select the record, and go to the 2nd page of a MasterDetail.
Do I create the Interactive Report, and customize the 2nd page, to add a region?
Or, do I create both page types, and redirect from the 1st page of the Interactive Report to the DML Form from the MD report? I tried that, re-assigning the link from the Interactive Report to be a Link to Custom Target, and specify the page # of the Master-Detail page. And it is taking me to the right page, but the data from the selected row is not coming with me, and the detail in the bottom region is not appearing at all.
Can someone please give me a nudge as to the sequence I should be doing?
(As you can tell, I'm new to Apex.... I'm trying to use it to create a prototype or proof-of-concept for a database driven web application)
Thank you
Marion

Yes, I tried that after I wrote to you - and it's fine, but not what I'm after; it's only based on 1 table and I'm working with 2 tables.
Perhaps I can explain in better.
I want one page as an interactive tabular report (of the master records)
I want to select a row, and transfer to a page that has the corresponding row on top (as a form), and a tabular region below of records from a related detail table.
ie, I want page 1 from the Interactive Report, and page 2 of the Master Detail report.
OK - I just took the form page, and added a region below in a tabular report. And I'm getting the data, but I'm getting all the records (not just the ones associated with the single record on top. I figure I need to edit the Region Definition->Source (to specify that the id numbers need to match), but the code is not editable.....
So I am in Structured Query Attributes, and I've Modified the Join Conditions - but I still get all the detail records in the bottom region. I''m trying to add in the ( + ) qualifier, but it doesn't affect anything...
I'm soo close to what i'm trying to do!
Thank you for your continued patience and assistance
Marion
here's the Source I have for the region..... (I'm including the excess ID columns just for learning purposes)
SELECT
"PHONENUMBERS"."PHONE_ENTITY_ID" "PHONE_ENTITY_ID",
"ENTITIES"."ENTITY_ID" "ENTITY_ID",
"ENTITIES"."FIRSTNAME" "FIRSTNAME",
"ENTITIES"."LASTNAME" "LASTNAME",
"ENTITIES"."COMPANY" "COMPANY",
"PHONENUMBERS"."PHONE_ID" "PHONE_ID",
"PHONENUMBERS"."PHONETYPE" "PHONETYPE",
"PHONENUMBERS"."PHONENUMBER" "PHONENUMBER",
"PHONENUMBERS"."PHONECOMMENT" "PHONECOMMENT"
FROM
"PHONENUMBERS",
"ENTITIES"
WHERE ENTITIES.ENTITY_ID = PHONENUMBERS.PHONE_ENTITY_ID
Edited by: mtpaper on Oct 12, 2009 1:30 PM
Edited by: mtpaper on Oct 12, 2009 1:32 PM

Master Detail report in bi publisher 11g

Hi All,
We are using OBIEE 11g (11.1.1.6).
How to achive the Master/Detail or Parent/Child reports in BI Publihser reports. Selectiing or Changing a column value in parent report should effect the child report/graph etc..
I understand this can be done through joining multiple datasets in a Data Model.
Can any one explain.
Thanks.

check the below
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi//bip/advancedbip/advancedbip.htm#t3
http://www.youtube.com/watch?v=NPbKRnSkDVM
using rtf template
http://bipconsulting.blogspot.com/2010/02/drill-down-to-detail-or-another-report.html

DVT: Master-Detail Bar Graph

Similar Messages

Maybe you are looking for