OBIEE 11g: Inconsistencies with Master-Detail events and Navigate to BI

Hi everyone,
I'm getting some pretty annoying inconsistencies with the Navigate to BI Content action as well as the Master-Detail events. Basically the main issue I get is that 90% of the time, the click does nothing.
It's a pretty simple setup, I am setting up bulb gauges to act like a fancy column selector. The bulb gauges are setup to pivot based on a Metric Type column. The goal is that if you click on "Metric 1" bulb a trend report should refresh to show Metric 1. If you click on the "Metric 2" bulb, the same trend report will show that metric.
Here's how I implemented it:
Dashboard Tab A -- Uses Navigate to BI Content
1) I have a prompt on Fiscal month in dashboard tab A.
2) I created the bulb gauge and put it in dashboard tab A
3) Setup the interaction on the bulb measure to navigate back to Dashboard Tab A.
3) Prompted the trend on Metric Type column and put it in dashboard tab A.
4) In theory, clicking on the bulb, should navigate back to the same tab and update the trend report appropriately
5) In reality, nothing happens.
6) The only way I can get the navigate to work is if I first change the value in the fiscal month prompt and click Go. Then I click on the bulb and the navigation will work ONCE. After that it's broken again.
Dashboard Tab B -- Use Master Detail -Events
1) Pretty much same situation as dashboard A, but instead of navigate to BI Content, I use the master-detail events.
2) Pretty much the same results. I cannot get it to consistently work, in fact the trick with the filter didn't do anything.
3) One thing I tried was cleared my browser history completely (Mozilla Firefox) and then launched the page. It work for about 5 clicks and then stopped.
Either way, neither of these are working properly for me.
Has anyone else had these issues?
-=Joe
Has anyone else had an issue with this?

So someone explained to me that master-detail events only occur within a single report. They cannot be used to communicate across two different reports.
That is significantly less useful than I originally thought. I honestly that it was a method of communication for one report to update other target reports that are all listening on the same channel. That would have been a powerful feature. A single report refreshing other views in the same report is still useful, but not as much.
That being said, I still don't understand what the heck is going on with the navigate to BI content feature. I've been testing it out. It works with pivot tables and regular tables. But the moment I add a graph, gauge or even a "Filter" view into the dashboard page, the click stops working. Really really strange stuff.

Similar Messages

Master-Detail Event in Obiee 11g

Hi all,
In master report i am using item family.
Detail report columns are item family,item name, cost and revenue.
Same analysis i created graph and table view.
When i am selecting item family in master i am getting correct changes in detail graph but not in table view.
Pls guide regarding this.
Thanks in advance.

Hi,
Have you correctly specified the channel names in both the views.
Refer
http://gerardnico.com/wiki/dat/obiee/master_detail
http://oraclebiblog.blogspot.com/2011/01/working-with-master-detail-report.html
Hope this helped/ answered
Regards
MuRam

Clarification on Master - Detail events usage on OBIEE 11g dashoards

Hi ,
Can Master - Detail events feature be used within two different analysis on dashboard ?
If yes , please let me know how .
If no , are there any alternatives for the below requirement :
1. I have a pivot table consisting of one dimension hierarchy (region) against revenue measure .
2. And one Bar graph , showing data on quater & region basis revenue .
Now by clicking one of the dimesion members (INDIA,USA) of region hierarchy , the bar graph will get changed accordingly .
For example , if by default it is total region and "new york" under USA region is clicked then the bar chart will change accordingly .
Thanks

Thanks for the link veeravalli !!
I don't want the user to navigate to any content , so can't use action links .
However , Can u please let me know whether this master detail event will work on different analysis (not from the same report views , i.e a between a pivot table view from report A and a bar chart report view from report B ) ?
Thanks

Populate PK(DBSequence) in three related tables with master detail association

Hi
I use jdeveloper 11.1.1.6.0.
My English isn't very good.
I have 3 tables with master detail association between them and primary key from table A should populate to tables B and finally C .The primary key is a sequence from data base and I set PK attribute in table A as a DBSequence. (table C is the child of table B and table B is the child of table A)
My association is like this: A->B(BAFk1Assoc) and B ->C(CBFk1Assoc) and also I select Composition Association for these two association. And I select ‘Cascade Update Key Attribute’
When I insert row in these three related tables, a negative number create but when I COMMIT the PK populate only to table B not to table C and the exception below raises:
Constraint "C_B_FK1" is violated during post operation "Insert"
ORA-02291: integrity constraint (HR.C_B_FK1) violated - parent key not found.
If I only work with tables A and B, there isn't any problem but if I add table C as the child of B, this exception raises.
Habib

The question is how you create the row for table C. Do you create it as child from table b (using the VO for B and using the link to C)?
In this case the framework should populate the PK of the master row B as FK in table C.
You may need to control the order in which the rows are posted to the DB to avoid this problem. Read Advanced Entity Object Techniques - 11g Release 1 (11.1.1.6.0) to get more info about this.
However, sometimes it's easier to control the generation and setting if the PK attributes in the model layer, not relating on db triggers where you get the real values only after the commit operation is done in the db. For this you can use a Groovy expression so you have access to the PK of each new created row right after creation. Read Using Groovy Expression to set a Primary Key with a Sequence Number | JDev &amp; ADF Goodies to find out how to do this.
Timo

OBIEE 11G: Issue with Agent

Hello All,
I am trying to make agent work in OBIEE 11G together with Active Directory settings but the agent are failling for some users. Some users are not able to send the ibots:
We get the following message with Agent Failed:
Agent ID: XXXXXXX
No devices for user: XXXX
Agent ID: XXXXXXXX
No Content for user: XXXX
Kindly note that I have already checked the My Account of these users and the email address is well present there.
Can anyone help us investigate on this issue.
Thanks and Regards

Where do you have your LDAP configured
Is it in RPD or in Weblogic?

How to build a screen with master detail data

Hi ,expert ,
Someone can teach me how to build a screen with master detail table ?
I wnat to build a screen for user to maintain FERT group and FERT detail list in one screen .
just like this ..
MASTER Block
FERT1
FERT2
FERT3
DETAIL Block
FERT1A1
FERT1A2
FERT1A3
when I double click FERT1 in the Master Block the detail view will show FERT1A1 A2 A3
Thanks for your help ....
Moderator message : Not enough research before posting. Spec dumping not allowed. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 1:38 PM

An inefficient way to create the array is to use the build array and a shift register as shown below. It's more effecient in terms of memory management to create the array and then use the replace array subset as shown in the other image. Of course, if you don't need the array inside the loop, just wire the value out of the while loop and on the exit tunnel, right click and select 'Enable Indexing'.
Message Edited by Dennis Knutson on 07-03-2007 10:25 PM
Message Edited by Dennis Knutson on 07-03-2007 10:26 PM
Attachments:
Crude Build Array.PNG ‏4 KB
Better Build Array.PNG ‏6 KB

Master-Detail Linking and column selectors

Does anyone know if it's possible (in 11.1.1.7) to create a master-detail link on a column that's part of a column selector?
There's a master "roll-up" table using a column that's part of a column selector group. For one of the columns in the group, I've set the interaction to "Send Master-Detail Event".
There's a detail table that uses that same column, and listens on the correct channel.
However, when clicking on the column output in the master roll-up table, the detail doesn't change.
I should mention I'm using the latest Firefox on PC, if that matters.
Thanks!
John

I'm facing the same issue.Has anyone worked on it?

Master Detail Wizard and User Interface Defaults

Trying to create a master/detail form (on one page, no report).
1. Wizard is giving the option to use User Interface Defaults for the master table, but not for the detail (I don't want to for either) - is this the expected behaviour? If so, why the inconsistency? Will/can this be changed in the future?
2. Despite selecting NOT to use UI defaults, and entering new region titles, wizard is creating default region titles using the UI defaults. Is this a bug?
3. Supplementary: Is it possible to get rid of UI defaults?
HTML DB 1.6.0.00.87

I asked about this last month:
Master Detail Wizard and User Interface Defaults
with no response.
Anyone?

Polling the master detail table and to update the LAST_UPDATED with SYSDATE

Hi
The requirement is polling the master detail table where read_flag is null and has to update the LAST_UPDATED with SYSDATE in both tables.
Refered the MasterDetail and PollingPureSQLSysdateLogicalDelete samples of SOASuite.
Used the delete polling strategy in polling process and modified the generated TopLink discriptor as follows.
set the TopLink -> Custom SQL tab -> Delete tab with the following query
for master table (RECEIVER_DEPT) :
update RECEIVER_DEPT set READ_FLAG= 'S' , LAST_UPDATED=sysdate where DEPTNO=#DEPTNO
set the TopLink -> Custom SQL tab -> Delete tab with the following query
for Detail table (RECEIVER_EMP):
update RECEIVER_EMP set LAST_UPDATED=sysdate where EMPNO=#EMPNO
After deploying the bpel process data is updated in master(RECEIVER_DEPT) table with LAST_UPDATED as sysdate and read_flag as S
however data is deleted in detail(RECEIVER_EMP) table rather than updated records.

Xtanto,
I suggest using JSP / Struts. UIX will be replaced by ADF Faces in JDeveloper 10.1.3 and thus I wouldn't suggest new developments to be started with UIX unless time doesn't allow to wait for ADF Faces. In this case develop UIX in an MVC1 model, using the UIX events for navigation because this model seems more likely to be mgratable, according to the UIX Statement of direction on Otn.
Back to your question. You can create a search form in JSP that forwards the request to a StrutsData Action to set the scope of teh result set. The read only table can have a link or a button to call the detail page, passing the RoewKey as a string.
Have a look at the Oracle by Example (OBE) tutorials that contain similar exaqmples.
Frank

Detail-Disclosure problem with Master- Detail VO

Hi,
I have UIX pages based on Master - Detail VO, detail data being shown when you press Detail button on the left, detail data display in the BC4J Table correctly, but I am able to update only the last record of the rowset. when I click on the first master detail and press update button i get Null Pointer Exeception error and other problem is that my detail data has sorted headers, when i click on the sorted column header, it close the Detail portion on the Table.
Here is UIX page listing, please any one review the code and let me what is wrong
Thanks
View Page
<?xml version="1.0" encoding="windows-1252" ?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:bc4j="http://xmlns.oracle.com/uix/bc4j"
xmlns:html="http://www.w3.org/TR/REC-html40"
xmlns:viewpage="http://www.example.org/siriusbilling/templates">
<ctrl:head xmlns="http://www.w3.org/TR/REC-html40">
<title>View Properties</title>
</ctrl:head>
<templates xmlns="http://xmlns.oracle.com/uix/ui">
<templateImport source="templates/SiriusBilling.uit"/>
</templates>
<bc4j:registryDef>
<bc4j:rootAppModuleDef name="PropertiesForeignKeyLink1AppModule"
definition="siriusbilling.SiriusBCModule"
releaseMode="stateful" >
<bc4j:viewObjectDef name="PropertyTypesMasterView"
rangeSize="2" />
<bc4j:viewObjectDef name="PropertiesDetailView"
rangeSize="5" />
</bc4j:rootAppModuleDef>
</bc4j:registryDef>
<ctrl:content xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui">
<viewpage:siriusPageLayout>
<pageHeader>
<globalHeader selectedIndex="0">
<contents>
<link text="View Properties" />
</contents>
</globalHeader >
</pageHeader>
<contents>
<try xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui" >
<catch>
<displayException />
</catch>
<contents>

<messageBox automatic="true" />
<bc4j:rootAppModuleScope name="PropertiesForeignKeyLink1AppModule" >
<contents>
<header text="Properties Search" >
<contents>
<form name="search" method="POST" >
<contents>
<inlineMessage prompt="Search by:" vAlign="middle" >
<contents>
<bc4j:viewObjectScope name="PropertiesDetailView" >
<contents>
<flowLayout>
<contents>
<choice name="attrName"
data:selectedValue="attrName@ctrl:page"
shortDesc="Search Column">
<contents>
<option text="Property Id" value="PropertyId" />
<option text="Property Name" value="PropertyName" />
<option text="Property Description" value="PropertyDescription" />
<option text="Unit Of Measure" value="UnitOfMeasure" />
</contents>
</choice>
<textInput prompt="Criteria" name="attrValue" columns="20"
data:text="attrValue@ctrl:page"
shortDesc="Search Criteria for Propeties"/>
</contents>
</flowLayout>
</contents>
</bc4j:viewObjectScope>
</contents>
<end>
<submitButton text="Go" ctrl:event="search" />
</end>
</inlineMessage>
</contents>
</form>
</contents>
</header>
<spacer width="10"/>
<separator />
<header text="Property Types" >
<contents>
<form name="viewForm" method="POST" >
<contents>
<bc4j:viewObjectScope name="PropertyTypesMasterView" >
<contents>
<bc4j:table name="viewPropertyTypeTable" automatic="false"
width="100%" alternateText="No rows found"
formSubmitted="true"
partialRenderMode="self"
data:detailDisclosure="tableDetails@ctrl:eventResult">

<bc4j:keyStamp>
<bc4j:rowKey name="key" />
</bc4j:keyStamp>
<contents>


<bc4j:column attrName="PropertyType">
<columnHeader>
<bc4j:sortableHeader text="Property Type"/>
</columnHeader>
<contents>
<bc4j:input readOnly="true"/>
</contents>
</bc4j:column>
<bc4j:column attrName="TableName">
<columnHeader>
<bc4j:sortableHeader text="Table Name"/>
</columnHeader>
<contents>
<bc4j:input readOnly="true"/>
</contents>
</bc4j:column>
<bc4j:column attrName="Comments" >
<columnHeader>
Comments
</columnHeader>
<contents>
<bc4j:input readOnly="true"/>
</contents>
</bc4j:column>
</contents>
<detail>
<flowLayout>
<contents>
<header text="Properties Detail">
<contents>
<spacer width="10"/>
<bc4j:viewObjectScope name="PropertiesDetailView" >
<contents>

<bc4j:table name="viewTable" automatic="false"
width="100%" alternateText="No rows found"
formSubmitted="true"
partialRenderMode="self">
<tableSelection>

<singleSelection selectedIndex="0" text="Select Row and ...">
<contents>
<submitButton text="Create" ctrl:event="create" />

<submitButton text="Update"
ctrl:event="update" />

<submitButton text="Delete"
ctrl:event="delete" />
</contents>
</singleSelection>
</tableSelection>

<bc4j:keyStamp>
<bc4j:rowKey name="key" />
</bc4j:keyStamp>
<contents>

<bc4j:column attrName="PropertyId">
<columnHeader>
<bc4j:sortableHeader text="Property Id"/>
</columnHeader>
<contents>
<bc4j:input readOnly="true"/>
</contents>
</bc4j:column>
<bc4j:column attrName="PropertyName">
<columnHeader>
<bc4j:sortableHeader text="Property Name"/>
</columnHeader>
<contents>
<bc4j:input readOnly="true"/>
</contents>
</bc4j:column>
<bc4j:column attrName="PropertyDescription">
<columnHeader>
<bc4j:sortableHeader text="Property Description"/>
</columnHeader>
<contents>
<bc4j:input readOnly="true"/>
</contents>
</bc4j:column>
<bc4j:column attrName="UnitOfMeasure">
<columnHeader>
<bc4j:sortableHeader text="Unit of Measure"/>
</columnHeader>
<contents>
<bc4j:input readOnly="true"/>
</contents>
</bc4j:column>
</contents>
</bc4j:table>
</contents>
</bc4j:viewObjectScope>
<formValue name="disclosed" value="true" />
</contents>
</header>
</contents>
</flowLayout>
</detail>
</bc4j:table>
</contents>
</bc4j:viewObjectScope>
</contents>
</form>
</contents>
</header>
</contents>
</bc4j:rootAppModuleScope>
</contents>
</try>
</contents>
</viewpage:siriusPageLayout>
</ctrl:content>
<handlers>
<event name="search" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertiesDetailView" >

<bc4j:findByExample>
<bc4j:exampleRow ignoreCase="true" >
<bc4j:exampleAttribute>
<bc4j:nameBinding><bc4j:parameter name="attrName" /></bc4j:nameBinding>
<bc4j:valueBinding><bc4j:parameter name="attrValue" /></bc4j:valueBinding>
</bc4j:exampleAttribute>
</bc4j:exampleRow>
</bc4j:findByExample>
<bc4j:executeQuery/>

<bc4j:setPageProperty name="attrName" >
<bc4j:parameter name="attrName" />
</bc4j:setPageProperty>
<bc4j:setPageProperty name="attrValue" >
<bc4j:parameter name="attrValue" />
</bc4j:setPageProperty>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="first" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertyTypesMasterView" >

<bc4j:first/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="previous" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertyTypesMasterView" >

<bc4j:previous/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="next" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertyTypesMasterView" >

<bc4j:next/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="last" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertyTypesMasterView" >

<bc4j:last/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="sort" source="viewTable" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertiesDetailView" >

<bc4j:sort/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="sort" source="viewPropertyTypeTable" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertyTypesMasterView" >

<bc4j:sort/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="goto" source="viewPropertyTypeTable" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertyTypesMasterView" >

<bc4j:goto/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="goto" source="viewTable" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertiesDetailView" >

<bc4j:goto/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="create" >

<ctrl:go name="InsertProperties" redirect="true" />
</event>
<event name="update" >

<ctrl:go name="UpdateProperties" redirect="true" >
<ctrl:property name="key" >
<ctrl:selection name="viewTable" key="key" />
</ctrl:property>
</ctrl:go>
</event>
<event name="delete" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertiesDetailView" >

<bc4j:findRowByKey>
<bc4j:keyBinding>
<bc4j:selectionKey name="viewTable" key="key" />
</bc4j:keyBinding>
<bc4j:handlers>

<bc4j:removeRow />

<bc4j:executeQuery/>
</bc4j:handlers>
</bc4j:findRowByKey>
</bc4j:findViewObject>

<bc4j:commit/>
</bc4j:findRootAppModule>
</event>
<event name="show">
<method class="servlet.showDetails" method="doHideShowEvent" />
</event>
<event name="hide">
<method class="servlet.showDetails" method="doHideShowEvent" />
</event>
</handlers>
</page>
Update View
<?xml version="1.0" encoding="windows-1252" ?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:bc4j="http://xmlns.oracle.com/uix/bc4j"
xmlns:html="http://www.w3.org/TR/REC-html40"
xmlns:updatepage="http://www.example.org/siriusbilling/templates">
<ctrl:head xmlns="http://www.w3.org/TR/REC-html40">
<title>Update Properties</title>
</ctrl:head>
<templates xmlns="http://xmlns.oracle.com/uix/ui">
<templateImport source="templates/SiriusBilling.uit"/>
</templates>
<bc4j:registryDef>
<bc4j:rootAppModuleDef name="PropertiesForeignKeyLink1AppModule"
definition="siriusbilling.SiriusBCModule"
releaseMode="stateful" >
<bc4j:viewObjectDef name="PropertiesDetailView" >
<bc4j:rowDef name="UpdatePropertiesDetailView" autoCreate="false" usesCurrency="true">
<bc4j:propertyKey name="key" />
</bc4j:rowDef>
</bc4j:viewObjectDef>

<bc4j:viewObjectDef name="PropertyTypesView" rangeSize="20" >
<bc4j:rowDef name="UpdatePropertyTypesView" autoCreate="false">
<bc4j:propertyKey name="key" />
</bc4j:rowDef>
</bc4j:viewObjectDef>
</bc4j:rootAppModuleDef>
</bc4j:registryDef>
<ctrl:content xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui">
<updatepage:siriusPageLayout>
<pageHeader>
<globalHeader selectedIndex="0">
<contents>
<link text="Update Property" />
</contents>
</globalHeader >
</pageHeader>
<contents>
<try xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui" >
<catch>
<displayException />
</catch>
<contents>
<switcher childName="default">
<boundAttribute name="childName">
<if>
<comparison type="equals">
<dataObject select="key" source="ctrl:page"/>
<dataObject source="ui:null"/>
</comparison>
<fixed text="error"/>
</if>
</boundAttribute>
<case name="error">
<header text="Required page property 'Property Type' missing. Cannot display page."/>
</case>
<case name="default">
<flowLayout>
<contents>

<messageBox automatic="true" />
<script>
<contents>
function UOMLovCallBack(lovwin, event)
var value = lovwin.returnUOMValue;
if (value!=(void 0))
document.updateForm.UnitOfMeasure.value = lovwin.returnUOMValue;
</contents>
</script>
<form name="updateForm" method="POST" >
<contents>

<formParameter name="event" />

<spacer width="10"/>
<tableLayout width="80%"
cellPadding="2"
hAlign="center">
<contents>
<bc4j:rootAppModuleScope name="PropertiesForeignKeyLink1AppModule" >
<contents>
<bc4j:viewObjectScope name="PropertiesDetailView" >
<contents>
<bc4j:rowScope name="UpdatePropertiesDetailView" >
<contents>
<bc4j:messageChoice prompt="Property Type" attrName="PropertyType" name="PropertyType">
<contents>
<bc4j:optionList voName="PropertyTypesView" attrName="PropertyType" textAttributeName="PropertyType" size="30"/>
</contents>
</bc4j:messageChoice>
<bc4j:messageInput prompt="Property Id" vAlign="left" attrName="PropertyId" size="30"/>
<bc4j:messageInput prompt="Property Name" attrName="PropertyName" size="30"/>
<bc4j:messageInput prompt="Property Description" attrName="PropertyDescription" size="30" />
<bc4j:messageLovField prompt="Unit Of Measure"
attrName="UnitOfMeasure"
name="UnitOfMeasure"
onClick="openWindow(window,
'UOMLov.uix',
'lovwin',
{width:480, height:300},
true,
'dialog',
UOMLovCallBack);
return false;" />
</contents>
</bc4j:rowScope>
</contents>
</bc4j:viewObjectScope>
</contents>
</bc4j:rootAppModuleScope>
</contents>
</tableLayout>
</contents>
</form>
</contents>
<contents>
<contentFooter>
<contents>
<html:center>

<pageButtonBar>
<contents>

<button text="Cancel" ctrl:event="cancel" />

<submitButton text="Update" formName="updateForm"
ctrl:event="apply" />
</contents>
</pageButtonBar>
</html:center>
</contents>
</contentFooter>
</contents>
</flowLayout>
</case>
</switcher>
</contents>
</try>
</contents>
</updatepage:siriusPageLayout>
</ctrl:content>
<handlers>
<event name="cancel" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:rollback/>

<ctrl:go name="ViewProperties" redirect="true" />
</bc4j:findRootAppModule>
</event>
<event name="apply" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertiesDetailView" >

<bc4j:findRow name="UpdatePropertiesDetailView" >

<bc4j:setAttribute name="PropertyId" />
<bc4j:setAttribute name="PropertyType" />
<bc4j:setAttribute name="PropertyName" />
<bc4j:setAttribute name="PropertyDescription" />
<bc4j:setAttribute name="UnitOfMeasure" />

<bc4j:commit/>
<bc4j:executeQuery/>

<ctrl:go name="ViewProperties" redirect="true" />
</bc4j:findRow>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
</handlers>
</page>

I think the detailDisclosure state needs to be saved and retrieved from the session.
I'm not sure using a table with singleSelection inside a detail disclosure is supported. Are you doing master-detail inside of detail disclosure? Detail disclosure is not really meant for that. In jdev 10g preview we make hooking up a master-detail easy. Here's a link to some doc about it.
http://otn.oracle.com/products/jdev/collateral/tutorials/9050/adfuix_tut.html#Create%20a%20Master-Detail%20page

Questions about master-detail update and delete!!

I have created a view object with two entity objects.
These two entity objects map master-detail tables in DB.
I want to update both tables when the user input, and delete the record in detail table (keeping master table unchanged) when the user click delete button.
How can I do?

did you figure this out? i have created VO made out of two updatable EOs and update works fine. But still have issue with deletion!

OBIEE 11g Issue with "group by"

Hello,
I have issues with the physical queries generated by OBIEE engine.
All the facts are at detailed granular level. when I query the table, group by clause is excluded from the query. following is the sample query generated by OBIEE 11g engine.
select 0 as c1,
D1.c2 as c2,
D1.c1 as c3,
D2.c3 as c4,
D2.c2 as c5,
D2.c1 as c6
from
(select distinct T48494.SMBL as c1,
T48494.EXP_DT as c2
from
VW_CONTRACT_DETAILS T48494
where ( T48494.EXP_DT in (TO_DATE('2012-09-03 00:00:00' , 'YYYY-MM-DD HH24:MI:SS'), TO_DATE('2012-09-19 00:00:00' , 'YYYY-MM-DD HH24:MI:SS')) )
) D1,
(select sum(T48494.TRADED_VOL) as c1,
sum(T48494.TRADED_VAL) as c2,
sum(T48494.TOTAL_TRADES) as c3
from
VW_CONTRACT_DETAILS T48494
where ( T48494.EXP_DT in (TO_DATE('2012-09-03 00:00:00' , 'YYYY-MM-DD HH24:MI:SS'), TO_DATE('2012-09-19 00:00:00' , 'YYYY-MM-DD HH24:MI:SS')) )
) D2
order by c3, c2
I'm getting similar kind of issues(exclusion of group by from query) even when i query other fact tables as well. Is there any global change to be made?
Regards,
Kishore

Does it mean you are expecting a group by on
D1.c1, D1.c2?
So query should like
select 0 as c1,
D1.c2 as c2,
D1.c1 as c3,
D2.c3 as c4,
D2.c2 as c5,
D2.c1 as c6
from
(select distinct T48494.SMBL as c1,
T48494.EXP_DT as c2
from
VW_CONTRACT_DETAILS T48494
where ( T48494.EXP_DT in (TO_DATE('2012-09-03 00:00:00' , 'YYYY-MM-DD HH24:MI:SS'), TO_DATE('2012-09-19 00:00:00' , 'YYYY-MM-DD HH24:MI:SS')) )
) D1,
(select sum(T48494.TRADED_VOL) as c1,
sum(T48494.TRADED_VAL) as c2,
sum(T48494.TOTAL_TRADES) as c3
from
VW_CONTRACT_DETAILS T48494
where ( T48494.EXP_DT in (TO_DATE('2012-09-03 00:00:00' , 'YYYY-MM-DD HH24:MI:SS'), TO_DATE('2012-09-19 00:00:00' , 'YYYY-MM-DD HH24:MI:SS')) )
) D2
group by c3, c2 ---> added line
order by c3, c2

Problem with Master -Details forms in seperate pages

Hi ,
Below is the scenario:
I have Institution and a department tables where there is a foreign key relation between the tables. So now i have two entity objects for the 2 tables and 2 view objects(DepartmentView,InstitutionView) from the entity objects.
I also have a view link between them.I made a master-detail relation between them in the datamodel using the view link.So my appmodule now has getters for the department view,institution view and viewlink.
I now have a jsp page "createInstitution.jsp" which contains a form for the institution , i have a "next" button on the same jsp which calls a method in my appmodule class .This methods just inserts the record into the Institution view. In this method i am able to see what the user entered in the form by getting the viewrow record like the below code :
InstitutionViewRowImpl newInstitutionRow=(InstitutionViewRowImpl) getInstitutionView().first();
The next button navigates to the next page "listDepartments.jsp" which contains the list of departments that are added. This page has a button "Add Department" which takes to to the "addDepartment.jsp" page which shows a form for adding a department. This page also has a button which calls a method in app module class. The method just inserts the record into the view(DepartmentView)
Here when i say
DepartmentViewRowImpl newDepartmentRow=(DepartmentViewRowImpl ) getDepartmentView().first();
the newDepartmentRow is null.
Also on the addDepartment.jsp form , i had used a output field to see what the parent id was and interestingly the parent id is 75 which is first institution in the database. It should have been "-10" , a temporary id assigned.
Can someone please tell me what is the problem with my approach?

I don't understand why you are using a method on your button to insert the record into the table - An Oracle ADF Form will do the insert for you by default without any coding.
See the create pages in these tutorials:
http://www.oracle.com/technology/products/jdev/11/cuecards/adf_set_21/ccset21_ALL.html
http://www.oracle.com/technology/obe/obe11jdev/11/dev_ui/developuserinterface.html#t2s5
The method that you are calling just returns the first record in the rowset - I don't see how it has anything to do with actually inserting the data into the table.

File Adapter with Master/Detail Use Case

Hello,
We are trying to model an inbound text file interface using the native format wizard to create a schema. The layout of this type of file would be fixed length with a header record followed by detail records like this:
header1header1header1header1header1
detail1detail1detail1detail1detail1detail1detail1detail1detail1detail1
header2header2header2header2header2
detail2detail2detail2detail2detail2detail2detail2detail2detail2detail2
We tried everything to get the wizard to layout the fields in each of these formats using the multiple records, multiple types choice and with no success. Has anyone gotten this type of thing to work? The error we're getting is something about the first position of the second record needing to start after the last position of the first record which seems daft because each line is a separate record. There doesn't seem to be any detailed help on this wizard that I can find.
Thanks.

Hi,
Here is an example of a Master/detail XML schema I made. Hope it helps.
It would be intersting to jnow how people have implemented that.
<?xml version="1.0" encoding="US-ASCII"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
targetNamespace="http://TargetNamespace.com/File4"
xmlns:tns="http://TargetNamespace.com/File4"
elementFormDefault="qualified"
attributeFormDefault="unqualified" nxsd:encoding="US-ASCII" nxsd:stream="chars" nxsd:version="NXSD">
<xsd:element name="Root-Element">
<xsd:complexType>
<xsd:sequence maxOccurs="unbounded" minOccurs="0">
<xsd:element name="Data">
<xsd:complexType>
<xsd:sequence maxOccurs="unbounded" minOccurs="0">
<xsd:element ref="tns:Master" minOccurs="0" nxsd:startsWith="MASTER," maxOccurs="unbounded"/>
<xsd:element ref="tns:Detail" minOccurs="0" nxsd:startsWith="DETAIL," maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>

<xsd:element name="Master" type="tns:MasterType"/>
<xsd:complexType name="MasterType">
<xsd:sequence>
<xsd:element name="ID" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="MasterID" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="A1" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="A2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="A3" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""">
</xsd:element>
</xsd:sequence>
</xsd:complexType>

<xsd:element name="Detail" type="tns:DetailType"/>
<xsd:complexType name="DetailType">
<xsd:sequence>
<xsd:element name="ID" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="MasterID" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="B1" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="B2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""">
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>

Procedure Based Form with master details Relationships

Helo All
Here i m having some problem in making one form which is having 2 tables one is master and other is detail table and i already made relationship between them but still i make both forms at that moment form didn't make the auto relationship.even after taht when at the form level i made the relationship between 2 tables it made but at teh compilation time it gives error.
Actually one table was there at that time it worked but with relation it creates problem.
Can anybody give me any idea how to sort out this problem.

Helo Frankin
Actualy the error came when i made the master detail relation manualy.but as per me if both tables have relationship with each other then no need to create it manualy isn't it?
even after that i created teh relation manaualy but at the on clear block details trigger it showed compile time error.
If possible can u give me any live example for this
TQ
Vivek

OBIEE 11g: Inconsistencies with Master-Detail events and Navigate to BI

Similar Messages

Maybe you are looking for