DW CS4 "System" Fonts

My wife's been using CS4 on a 19" CRT at 1024x768 resolution for quite a while. When her monitor went out this weekend, I managed to chase down a 19" LCD monitor, but this really has to be run at its native resolution of 1280x1024.
Well, she really didn't like everything getting smaller on the screen, so she started playing around with various Windows settings having to do with system fonts and font sizes. Her desktop and some apps now look like she wants, but DW is a mess! The fonts in the menus are large and very poorly rendered, but even worse, the fonts in the various panels now don't seem to fit correctly, appearing cut off or overlapping in some cases.
Is there any solution or workaround for this?
It does bring out one problem of LCD vs. CRT monitors: CRTs would look just about as good at any one of several resolutions, but LCDs only look sharp at their native resolution, and the trend is to keep packing in more pixels.

In my experience, unfortunately, the solution is to set the LCD monitor at it's native resolution as Dreamweaver doesn't handle the system fonts being resized. Also, when you run LCDs a smaller resolution then their native resolution, I've found that they make everything fuzzy, and you really don't want that when you're working on a design, much less when you're trying to read text.

Similar Messages

Strange System Font in Dreamweaver. After I installed Dreamweaver CS4 on my Mac, it loaded this strange font as seen in the photo attached. Anyone know how to fix this? I have uninstalled/reinstalled many times. No prob w/ other CS4 programs.

Strange System Font in Dreamweaver. After I installed Dreamweaver CS4 on my Mac, it loaded this strange font as seen in the photo attached. Anyone know how to fix this? I have uninstalled/reinstalled many times to no avail. There are no other problems with w/ other CS4 programs, they all have the normal system font. I can't figure it out. Thanks!

Funny fonts issue in PI etc.,
http://kb2.adobe.com/cps/405/kb405153.html
Fonts in Dreamweaver panels display incorrectly
http://kb2.adobe.com/cps/138/tn_13862.html
Nadia
Adobe Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

When starting InDesignCS2 received new error message -- InDesign is missing required system fonts or

We are not able to start Indesign CS2 without getting the error message: <<InDesign is missing required system fonts or CMap files. Please reinstall InDesign.>> This is on WinXP. Recently I installed Creative Suite CS4. It took almost a day to install. The installation kept on stopping. Each time we were able to install one more program. After checking all of the programs we discovered that Firefox would not start due to a possible font error. After reading many posts I decided to uninstall a lot of fonts since I did not know which one was the culprit. However now I am missing a font (at least I hope that this is caused by a missing font and not anything else) that should be there and I don't know which one it should be. I did uninstall a <lot> of fonts and don't remember which ones. WE did uninstall all CS2 programs and then reinstalled only the necessary three. However that did not make any difference. Any ideas and suggestions would be welcome Thanks Pia Pehtla

A forum search for "missing required fonts" brings up this thread which should solve your problem:
http://www.adobeforums.com/webx?128@@.3bbdb0a7
Peter

Windows Flash CS3/CS4 Installing Fonts

Hi,
Can someone tell me where Flash gets its fonts from. Does it use just the system fonts or can it see the C:\Program Files\Common Files\Adobe\Fonts folder?
Thanks
Simon Kemp.

Problem is not in your windows 7 OS, since i was working CS4 and now i m working with CS5 in windows 7 only. And i feel more comfort with this new OS. May be you hardware configuration might not be support to new technology like windows 7 and Flash CS5. Beca it is need high hardward configuration

After removing system fonts and reinstalling fonts, FireFox will not start

After removing system fonts and reinstalling fonts, FireFox will not start! When I start FireFox the "Mozilla Crash Reporter" opens as if FF just crashed??? I don't see any records in event viewer. I am using FF v3.6.3 on a Windows 7 box. I tried uninstalling 3.6.3 and installing 3.0.18 and had the same problem!
== This happened ==
Every time Firefox opened
== After a uninstalled all fonts including system fonts and then reinstalling system fonts. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; AskTB5.5)

The files with submitted crash report ids are inside the ''submitted '' directory, from the directory you found the LastCrash.txt timestamp file.
The file names will begin with '''bp-'''
There might be more information from the crash report, but it might just tell us you are crashing the first time Firefox tries to use a font.
One thing I suppose you could do is select only those fonts you've got in Tools -> Options -> Content -> Fonts and Colors -> Advanced and then uncheck the '''Allow pages to use their own fonts''' option.
See http://support.mozilla.com/en-US/kb/Options+window+-+Content+panel#Fonts_Dialog
To be honest, I can't find anything on this Netscape Font Navigator and it sounds highly dubious.

How do i make system fonts look better?

i am attempting to use univers, which is a system font and so exports as an image. i am using it at a larger size. when i preview in browser, it looks choppy. is there a way to make these system fonts less so, closer to the regular look of web safe fonts? thank you.

The short answer is set an opaque background fill on the text frame (it can be a solid color, gradient or background image).
When the browser or OS is drawing live text, it has the benefit of knowing the exact color of every pixel that will be behind the edges of the text and it uses this knowledge to adjust the colors of the edges of the text to smooth the appearance—a process called anti-aliasing.
When Muse is creating an image for a System Font in a text frame with a no fill (or a semi-transparent fill), Muse can't know with certainty exactly what colors will be behind the text. Therefore Muse uses a "grayscale" version of anti-aliasing. Grayscale anti-aliasing provides a better appearance than the hard stair steps of no anti-aliasing, but the end result is inferior to the color anti-aliasing that's possible when the background pixel colors are known and opaque.

Setting for "Rely on system fonts" does not work

Hello,
Some time ago I wrote a VBA function that would print a worksheet to pdf. It worked great. I reformatted my system, and now the code no longer works. When I run the routine, I receive the error message, "When you create a PostScript file, you must reply on system fonts and use document fonts. Please go to the printer properties, 'Adobe PDF Settings' page and turn OFF the option 'Rely on system fonts only; do not use document fonts."
I have changed this setting within the Adobe printer setting in Excel, I have changed it in both the 'Printing Preferences" and "Printer Properties" with the Devices and Printers Windows dialog, and I have confirmed that it is turned off in the binary registry key "HKEY_CURRENT_USER\Printers\DevModePerUser\Adobe PDF". Also, I have applied the Acrobat 9.4.2 patch. Yet still I get the message when my code is executed....
There were a few changes between my system from before my reformatting. The common items were Windows7 64-bit, Adobe Acrobat 9. The changes were that I went from Microsoft Office 2010 64-bit to Office 2010 32-bit. Windows 7 SP1 is now installed. Also, both Acrobat and Office are installed on my internal "Data" drive, rather than the "C" drive where my operating system is installed.
Although I do not see an issue with code, since it worked for months, I have included it below (the printing code is at the end). Any help would be GREATLY appreciated!
Public Sub EnumOrder(ByVal lngLine As Long)
'lngLine is the line number to start enumeration at
Dim strStore As String
Dim strFileName As String
Dim strTmpPath As String
Dim strPDFPath As String
Dim c As Long
Dim x As Long
Dim lngErr As Long
Dim wsPicklist As Worksheet
Dim wsTemplate As Worksheet
Dim oPDF As PdfDistiller
Set oPDF = New PdfDistiller
Set wsPicklist = Worksheets("Phase II Picklist")
Set wsTemplate = Worksheets("Template")
strStore = wsPicklist.Cells(lngLine, 1).Value
' Clear formatted border on order template
wsTemplate.Activate
wsTemplate.Range("A7:L56").Select
Selection.ClearContents
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
Selection.Borders(xlEdgeLeft).LineStyle = xlNone
Selection.Borders(xlEdgeTop).LineStyle = xlNone
Selection.Borders(xlEdgeBottom).LineStyle = xlNone
Selection.Borders(xlEdgeRight).LineStyle = xlNone
Selection.Borders(xlInsideVertical).LineStyle = xlNone
Selection.Borders(xlInsideHorizontal).LineStyle = xlNone
wsPicklist.Activate
' Initialize variables
strFileName = wsPicklist.Cells(lngLine, 1) & "-" & wsPicklist.Cells(lngLine, 2) & " " & Format(wsPicklist.Cells(lngLine, 4), "mm-dd-yy") & " Team" & Format(wsPicklist.Cells(lngLine, 3), "00")
c = 7
x = lngLine
' Add store order data to the template
With wsTemplate
    ' Add header data to the order template
    .Cells(1, 2) = wsPicklist.Cells(lngLine, 1) ' Store #
    .Cells(2, 2) = wsPicklist.Cells(lngLine, 3) ' Team #
    .Cells(4, 2) = wsPicklist.Cells(lngLine, 4) ' Deliver By
    .Cells(1, 5) = wsPicklist.Cells(lngLine, 13) ' Ship To Name
    .Cells(2, 5) = wsPicklist.Cells(lngLine, 14) ' Ship To Address
    .Cells(3, 5) = wsPicklist.Cells(lngLine, 15) ' Ship To City/State/Zip
    .Cells(4, 5) = wsPicklist.Cells(lngLine, 16) ' Comment
    ' Add line items to the order template
    Do
        .Cells(c, 1) = wsPicklist.Cells(lngLine, 6) ' Part #
        .Cells(c, 2) = wsPicklist.Cells(lngLine, 7) ' Part Name
        .Cells(c, 7) = wsPicklist.Cells(lngLine, 8) ' Qty Ordered
        wsPicklist.Cells(lngLine, 10) = Now         ' Date Printed
        wsPicklist.Cells(lngLine, 11) = strFileName ' File Name
        lngLine = lngLine + 1
        c = c + 1
    Loop While strStore = wsPicklist.Cells(lngLine, 1)
End With
'Create formatted borders on store order template
x = lngLine - x + 6
wsTemplate.Activate
wsTemplate.Range("A7:L" & x).Select
With Selection.Borders(xlEdgeLeft)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
With Selection.Borders(xlEdgeTop)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
With Selection.Borders(xlEdgeBottom)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
With Selection.Borders(xlEdgeRight)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
With Selection.Borders(xlInsideVertical)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
With Selection.Borders(xlInsideHorizontal)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
' Print the store order to PDF
strTmpPath = "D:\Eric\Desktop\WIS-Speedway\Phase II\Picklists\New\Tmp\"
strPDFPath = "D:\Eric\Desktop\WIS-Speedway\Phase II\Picklists\New\"
wsTemplate.PrintOut copies:=1, preview:=False, _
ActivePrinter:="Acrobat Distiller", printtofile:=True, _
collate:=True, PrToFileName:=strTmpPath & strFileName & ".ps"
oPDF.FileToPDF strTmpPath & strFileName & ".ps", strPDFPath & strFileName & ".pdf", ""
' Set active cell to next store order
wsPicklist.Activate
wsPicklist.Cells(lngLine, 10).Select
End Sub

Ok, I have given up the ghost on this problem. I found a MUCH better solution to the problem that I was having, that also has the side benift of processing far faster. See http://msdn.microsoft.com/en-us/library/ee834871(office.11).aspx for details. Basically, I am now using the VBA ExportAsFixedFormat method, rather than Distiller. Hope this helps.

Is there a way to prevent Mail from loading non system fonts?

For over a year, and a system OS upgrade, Mail has been taking 7 - 10 minutes to load all the thousands of fonts I have on my computer for graphic design. This started with Snow Leopard on my 2009 Mac Pro (10 GB RAM, 2 TB HDD). At first I didn't know why the computer was taking such a long time to finish boot up. So I reformatted the drive--zeroing it out. Then I installed Mavericks and reinstalled everything else. Finally I tried logging the system activity during startup and noticed that something to do with fonts took up the biggest chunk of this time. Because Mavericks loads any programs you leave running at shut down, I saw that if Mail had the fonts window open, the list of fonts would slowly grow, filling up with the many font families I use for my work. I called tech support for my font management utility but they say the fonts are not in the system and and shouldn't affect the system during startup. In the end I gave up and just go drink a few coffees after hitting the start button. It's like going back to the early days 25 years ago.
Can I stop Mail from loading any non-system fonts? I never use anything but the default font.

Hey SchenkerBob,
It is possible to disable non-system fonts temporarily for all applications using the Font Book application. This article explains how to do so -
Mac Basics: Font Book - Apple Support
In particular -
Disable and enable specific fonts
In situations where you'd like to prevent a font from being available in applications, but you don't want to completely remove the font from your Mac, you can use Font Book to disable the font.
In Font Book, click "All Fonts" in the Collection column.
Click the name of the font in the Font column.
Choose Disable "Font Name" Family from the Edit menu.
Since it might be problematic to have to disable each font individually, you can create a collection of fonts and disable the collection. See the article for how to create a font collection -
Organize fonts as collections
When working with fonts, you may discover that you use certain fonts frequently, but rarely use others. To make it easier to find the font you are looking for, you can organize your fonts into collections.
From the Font Book File menu, choose New Collection.
Type in a name for the new collection.
Click "All Fonts" in the Collection column.
Drag the fonts that you want from the Font column onto the name of your new collection in the Collection column.
You can then disable collections of fonts -
You can also disable or enable all fonts in a collection: Click the name of the collection in the Collection column, then choose Disable "Collection Name" or EnableCollection Name" " from the Edit menu.
Thanks for using Apple Support Communities.
Happy computing,
Brett L

How do I remove dozens of "protected system" fonts from my computer?

There are dozens of foreign language fonts installed on my system, (how they got there, I don't know, but I suspect the Cloud programs installed them at some time or another) and all they do is clutter up the selection list when I try to select a font to use. (No, the "hide foreign language" tool in Windows doesn't fix the problem.) I went to my Windows 7 control panel Fonts page and selected all the fonts I wanted to remove and hit Delete. Fine for some, but I kept getting a warning that the font I was trying to remove was a "protected system" font and could not be removed. Horse manure! I don't need them, I don't want them, and I want them removed from my system. So, how do I get these fonts "un-protected" so I can delete them forever from my computer??

Thanks for the link. It appears that the problem is with Windows, and not something the Cloud did to my computer after all. From what I can tell, people have been upset about this since sometime in 2009, and the only way to remedy it is to edit the registry and/or change the ownership of the files and grant administrator permissions to myself (somehow even more than I already have). It WOULD be nice if Adobe at least found a way to comply with MS's file hiding scheme so Photoshop and Dreamweaver and InDesign would not show all of the unneeded, unwanted, and unnecessary foreign language fonts that MS won't let us mere users delete. Thanks for the help, anyway.

Using windows 8.1 and photoshop cs4 the font size of the MENUS is so small as to be almost unreadable. how do i make the menu fonts larger. this is happening also with bridge

Using windows 8.1 and photoshop cs4 the font size of the MENUS is so small as to be almost unreadable. how do i make the menu fonts larger. this is happening also with bridge

Thank you so much. You are absolutely right. I will have to reduce the screen density when I work with those programs.
Thanks for your trouble and regards
Quentin Sussman
<mailto:[email protected]> [email protected]
Cell: 082 4900 124
Home: 011 883 2582
Fax: 086 680 7981

System Fonts not showing in the font list

After I upgraded Adobe CC 2014.3.1.44, CL78964 on my Windows 8 (64-bit) computer, none of the system fonts are listed within Muse.
Understand two things, one. This used to work fine. I was able to see all of the system fonts, now only the ones on this list show up. Two, and fonts that I add via the web kit doesn't show up either.
I have uninstalled, then reinstalled. Nothing. I have also looked for the elusive fonts.db, which cannot be found on my system. Ideas?
Thanks,
Aaron

Hi Aaron,
Thanks for the prompt response. We are wondering if you could try a few other things that will help isolate the issue. Our theory is the issue might be related to OS user permissions.
Run Adobe Muse CC as an Administrator
Locate the "Adobe Muse CC 2014" shortcut icon in Windows Explorer
Right-click the "Adobe Muse CC 2014" icon and then click "Run as administrator"
When the "User Account Control" is displayed, do one of the following:
If you are logged on as a standard user, or if the user account control is configured to always require credentials, enter the appropriate administrative credentials, and then click "OK"
If you are logged on as an administrator and user account control is not configured to always require credentials, click "Yes" to start the application
After Muse finishes launching, create a new site and inspect the font drop-down
Verify "Local Store" folder permissions
Open a Windows Explorer dialog
In the address field enter "%appdata% and open the folder named "com.adobe.AdobeMuseCC.2014.3".The folder path should be similar to the following with <username> being the current OS user's nameC:\Users\ <username> \AppData\Roaming\com.adobe.AdobeMuseCC.2014.3
Right-click on the folder "Local Store" and select "Properties"
In the "Local Store Properties" tab, select "Security"
Select the current user name from the "Group or user names" list
Observe the section "Permissions for ...." in the "Local Store Properties" dialog. Does the user have full permissions (full control, modify, read & execute, list folder contents, read, write)?
Do you know if the Windows OS user account you are using is an administrator or standard user on your machine? You can find out by navigating to the following in Windows Explorer and selecting "Manage User Accounts":
Control Panel\User Accounts\User Accounts
Please let me know if you need any clarification on what we are asking for.
Thank you for your time in advance.
Regards,
Marc

Font is missing on the install prompt. How do I reinstall all standard macbook pro system fonts?

I recently installed a font pack and then removed the fonts shortly thereafter. Apparently the font that is used in the "install prompt" (the window that pops up for me to enter a password before installing new software) is now missing. The window pops up but everything is blank. How do I go about reinstalling all of the standard macbook pro system fonts?
Thanks!

I recently installed a font pack and then removed the fonts shortly thereafter. Apparently the font that is used in the "install prompt" (the window that pops up for me to enter a password before installing new software) is now missing. The window pops up but everything is blank. How do I go about reinstalling all of the standard macbook pro system fonts?
Thanks!

How can I add system font to Acrobat Pro X?

I tried to use "Edit Document Text" Function. There is an error pop-up as " All or part of the selection has no available system font. You cannot add or delete text using the currently selected font.". How can I add system font to Acrobat Pro X?

It is referring to the fonts installed on your computer - to edit text within a PDF you must have the same font installed (i.e. one with the same PostScript name). Acrobat doesn't have a separate way to load fonts, you install them in the normal way through your operating system control panel after downloading/purchasing the font files from a vendor.

I want to change fonts but get message "no available system font"

I am trying to edit a PDF flyer created by another party. Using Acrobat Pro on Mac OSX. I select "edit document text" and then try to delete or change the text and get the message. "all or part of the selection has no available system font You cannot add or delete text using the currently selected font"
I don't see any font format bar or other method of changing the font.
Is there a way to work this?

Over at the AUC's "Acrobat Answers" Karl Kremer replied to a similar question.
In part he wrote:
"I assume you want to edit content in a PDF file, and you cannot do that because you don't have the font installed that is used in that file. That is the way Acrobat works: You need to have the font that is used in your document installed on your local computer in order to make changes to text that uses that font. There is no way around that. You will have to find out what font is used for the text you need to edit, and then acquire that font (and that usually means to purchase that font, unless you are a subscriber to e.g. CC and that font is available via TypeKit).
Another option is to select all the text and change that text to a different but similar font. You again can only use a font that is available on your computer as the target font. But once you've done that, you should be able to edit your document.
You change the font by selecting Tools>Content Editing>Edit Text & Images, then you select the text you want to change, and your target font."
Be well...

Acrobat X Pro does not recognize system font

I scanned a document to pdf, opened it in Acrobat X Pro and then applies OCR to the image by clicking Edit in the OCR dialogue and chose ClearScan. I then went to edit the text, but when I clicked on a selection, a TouchUp dialogue box popped up stating, “All or part of the selection has no available system font. You cannot add or delete text using the currently selected font.” The font used in the document was Arial 10 pt. Does Acrobat not recognize that font? Is there any way to edit this pdf's text?

I still haven't got a sense of what exactly you are after, since you are not only talking about settings with visible OCRd text. But my results partly support yours, partly not. My tests were with Acrobat X, your mileage may vary.
OCR with searchable image... the image contained standard fonts, which I could freely edit. No problem, except of course that the results didn't change on screen. I could also correct OCR suspects, which is the editing Adobe are expecting you to do.
OCR with cleartext... the image contained generated fonts, which I couldn't change. I don't see this as a security thing, rather that Acrobat has generated synthetic fonts which match the exact appearance of the scan, and has no idea what the original font was. I can't edit these, because I don't have the font. (If it let me edit them I suspect it would fail horribly, because the generated font will only contain the letters it believes to be there, not other ones you might need). I can, however, select the text and change the font, then edit the results. There were no OCR suspects, which I find a little odd for the same original, but the OCR was indeed more accurate.
By the way, I may not have made this comment: editing PDFs is sometimes possible, but it should always be thought of as a desperate last resort. Just be happy the few times you can use it, don't expect much or anything, and you won't be disappointed. If you want to edit scanned text (as opposed to correct OCR) don't scan to PDF.

DW CS4 "System" Fonts

Similar Messages

Maybe you are looking for