DW CS5.5 Device Testing

Hello. I have created an Android mobile app using Dreamweaver cs5.5. I am able to test it with the emulator and using Device Central. How can I test it on the actual device? I have not been able to find out by searching. All searches show how to do it with the Device Central. Thanks for all help.

Hi SnakEyez02,
Thanks for that... I have updated the thread so that it works now
ANSWER
1. Create a new site in DW CS5.5
     Under Site Tab:
          Site Name: test
          Local folder: desktop/test
2. Unser server tab:
          Basic tab
               Sever name: whatever.
               Connect with: local/network
               Server folder: htdocs/xampp/mysite
               Web URL to http://127.0.0.1/xampp/mysite
          Advance tab
               maintain sync info: Checked
               automatically upload on save: Checked
               Testing Server Model: PHP MySQL
          Save
               Remote: unchecked
                Testing: checked
          Save
3. Create new php file and open it, save it, making sure that the cursor is still flashing within the document.
4. Open the Databases tab
     Click the + and select MySQL Connection
          name: MyConnection
          mySQL server: localhost
          username: root
          password:
          select database/ table and press OK
Now at the top of the php doc press "discover"
THATS IT:)

Similar Messages

  • DP-WLK - Hot Replace Device Test are failing

    DP WLK - Hot-Replace - Device Test - Verify driver support for D3 power state is getting failed on Windows Storage Server 2012 R2. It fails in Run IO Stress Test.
    Kindly provide a solution for this.
    Log File Output:
    WDTF_SIMPLE_IO : - PerformIO(Matrox G200eh (WDDM 1.2) PCI\VEN_102B&DEV_0533&SUBSYS_3381103C&REV_00\4&15D41075&0&01E7 ) Failed : The workstation is locked: Direct3D testing is not possible when the workstation is locked. Please ensure
    that the workstation is unlocked before starting this test, perhaps by enabling auto-admin-logon. You might have a domain or group policy that forces the workstation to be locked after resuming from sleep states: If so, please contact your network Administrator
    or remove the computer from the domain. HRESULT=0x80004005 Count 2830

    Hi Mudit,
    Thanks for looking into this. I think the system gets automatically logged into DTMLLUAdminUser
    Account when we run the DP-WLK test, Please let me know if there are any manual steps involved in this.
    Also the disk targets are in not initialized state. Is that enough or we need to do anything else for
    it.
    Thanks in advance.
    Regards,
    Bedabrata

  • HOT Device Test Engineer

    TITLE: DEVICE TEST ENGINEER         
    3MO TEMP-TO-PERM
    NEED SOMEONE TO START RIGHT AWAY!! WILL INTERVIEW THIS WEEK!
    DESCRIPTION OF DUTIES:
    PROJECT MANAGEMENT OF TEST EQUIPMENT DEVELOPMENT (HARDWARE AND SOFTWARE)
    FROM DESIGN TO HIGH VOLUME PRODUCTION
    DESIGN AND IMPLEMENT PRODUCTION TEST METHODS AND FACILITIES FOR HIGH SPEED
    OPTO- ELECTRONIC DEVICES
    PROVIDE SUSTAINING ENGINEERING SUPPORT IN THE DEVICE TEST AREA TO QUICKLY
    RESOLVE ISSUES.
    QUALIFICATIONS (INCLUDING SPECIAL SKILLS, EXPERIENCE, EDUCATION):
    · BSEE WITH CS KNOWLEDGE, OR EQUIVALENT DEGREE/EXPERIENCE
    · LABVIEW, LABWINDOWS/CVI, VISUAL BASIC OR C/C++ PROGRAMMING
    · INSTRUMENTATION AND AUTOMATION EXPERIENCE WITH GPIB, PLC AND RS-232
    Please reply to bderenthal@TRSStaffing
    .com or call 800-332-9199 x 104.

    Post somewhere else. This is for people with CVI questions not head hunters trying to make a buck.
    Grant
    Grant M. Johnson
    Project Engineer
    LECO Corporation

  • Problems with Flash Professional CS5 and Device Central CS5

    I have Adobe CS5 Web premium, Windows 7 64-bit.  (All updates on both)
    My problem is that when I press create on Device Central it doesn't set up the flash document specs for the particular device I am trying to build an app for.  It does the same thing when I try to create a new Adobe Device Central document in flash.  However when I try and create mobile documents for photoshop, illustrator or fireworks it works fine.  It is just when I try and create one for flash.
    Any suggestions?

    I realize this is an old thread, but I am having the same problem. In Device Central CS 5.5, I first selected Browse and dragged the HTC Droid Incredible, Motorola Droid 2, and Motorola Droid X to the Test Devices pane. Then I selected Motorola Droid 2 and clicked the Create button. At this point, the three devices that I added are grayed out, and the New Document pane says "To start, please select device(s) in the 'Test Devices' panel." The Motorola Droid 2 is still selected in the Test Devices panel, but as I said, it is grayed out.
    What am I msising?

  • Update the Player Flash CS5 Uses (In Test Movie)

    So Flash CS5 came with a beta version of Flash Player 10.1.
    Now that the official release of Flash Player 10.1 is released, how do I update what Flash CS5 uses when I Test Movie?
    I have so far updated the Flash Player in my browser and my standalone players but I can't seem to figure out how to update the Player that Flash CS5 uses.
    This wouldn't be so bad if the beta of 10.1 wasn't breaking my project because of bugs.
    Any help appreciated.

    More bumps, there has to be a way to do this.  Adobe wouldn't cement in a beta verison of Flash Player into Flash CS5 would they?

  • Adobe CS5.5 Device Central freeze on install

    I've been attempting to install Adobe CS5.5 Web Premium on Lion over the past few days with no success.
    When the installer reaches "Adobe Device Central CS5.5" (Approx 15%), the total time remaining shoots up to 2 hours and eventually just freezes.
    I have looked around the Internet trying to find a solution but nothing seems to work - just wondering if anyone had any possible fixes on here?
    (Macbook late 2009 2.26ghz Intel core 2 duo)
    Note: I've tried the Adobe CS Removal Tool and installing Java runtime.

    I do not know if this will fix the installer issue you are having with CS5 Web Premium, but it worked for a freezing CS5 InDesign install.
    Reboot into safe mode (hold the shift key down till the grey bar shows up at the bottom of the display) then try the install.

  • CS5 Aggregate Devices

    Trying to use an aggregate device in Adobe Audition CS5. I keep getting the message "the Device in the use by another process". Each Mic works individually, but when I add the aggregate device I get that message.
    I've exited all apps besides Audition. Tried restarting, nothing works. 
    Running adobe cs5 on a 27 inch iMac running OSX 10.9.5. I have created the aggregate device from two Blue Yeti Mics.
    There was a discussion about this in 2011 with no resolution. Anyone have an success? Is there another way to have two USB mics record simultaneously in Audition?

    ryclark wrote:
    So the Mac audio drivers have to sample rate convert all the USB mics internally to a common sample rate for the DAW to understand> Doesn't sound like a very good idea to me.
    Doesn't to me either - but it must be what they're doing, yes.
    R-swizzey wrote:
    The aggregate set up with two USB mics works just fine in Garageband. Surely a product like Audition should be able to out-perform a free app. There has to be an easy solution. Right?
    Doesn't work like that. The aggregation function is inherently a part of the OS. Audition doesn't deal with that level of functionality at all, and simply records what is sent to it from whatever device is available. In theory, on PCs, ASIO4ALL ought to be able to aggregate USB devices in the same way, but I have no idea whether it can or not. This is simply because I don't own a single USB mic, and never will! If it won't, it will be because it can't do the re-sampling necessary on the fly.

  • Should Device Test find problem with counter?

    Hello!
    I am have one problem with PCI 6251 board. It seems to me that something happening with counter 0. Several days ago everything was ok, but now any counter output does't appears on its terminal (on BNC 2120 block). When I see at the signal from it on the oscilloscope, I can see right shape of the pulses, but about 10 mV amplitude. Everyting is perfect with counter 1 output.
    OK, I run the self-test and it is passed. I have tried to reset the devce and try again - the same result. Self-test is passed, but counter 0 seems to be not functioning.
    Is it another possibility to check the device?
    Thanks in advance!

    Hi Baturin,
    It is quite possible that your BNC connector has problems. If you were able to route the output of Counter 0 to a PFI line, and able to see a good signal, then your terminal block is at fault. The first things you should look for are the pins. Sometimes, the pins on the connectors are bent, and thus do not provide a reliable contact. Second thing you should look for is any external damage. Finally, use the test panel in Measurement and Automation Explorer (MAX), in the counter tab to test the card (which is probably what you are already doing).
    If all of the above still seem to confirm your initial diagnostic of a bad BNC connector and a good M series card, then please call us. We would then do a final troubleshooting before sending your BNC connector back to be repaired.
    Thank you and best regards,
    Nathan
    Applications Engineer
    National Instruments

  • Flash CS5 problem: Movie Test - stage background goes white

    Hi everyone,
    I am having this problem where my stage background goes white upon movie testing and it doesn't matter if I've set the stage background to green, blue, etc.. However, when exported, everything seems to be fine. I've checked all configurations in my preference menu, but nothing from the settings is causing this. When I exported the file and play it on Flash Player 10, the background is black. Attached is a screenshot of the occurred problem. Could this be a bug or does anyone have a similar situation? Thanks!

    Thanks for the wonderful quick fix simPod_, I've deleted my mm.cfg file, but somehow this isn't permanent. It should do for now except the hassle of deleting the file and restarting flash. If anyone else have a permanent solution to this, I'll gladly appreciate any responses. Thanks!

  • Device test failure

    i made an scrolling image sequence, that is controlled with moving left-right mouse or finger
    there are 120 images and its wheight is 36 Mb
    it runs great on desctop as SWF
    BUT when published to .ipa and lounched on iPad 2 - black sreen for aboute 5 sec. and throws back to "home"
    what does that mean?

    Maybe the images are too much for the device to handle, im not sure what code you used, but are you removing your event listeners each time you add a new one? because from IOS experiece I found out that the iphone does not like HD images from flash. I only had about 30, it still worked but performance was not all that great.

  • Issues with building for device testing on iPad and Network/USB debugging

    I recently upgraded to FB 4.7 and Air3.5 to use the much needed USB debugging (I was not having any luck connecting with network debugging in FB 4.5, with port forwarding...). I am on a Windows machine (but am able to have someone load the IPA on a device for me from a Mac via Xcode).
    Now, when I try to build a debug IPA for deployment on device, I get an invalid value error with the following InfoAdditions tag (same application file worked in FB 4.5).
    <InfoAdditions><![CDATA[
                                  <key>UIDeviceFamily</key>
                                  <array>
                                            <string>1</string>
                                            <string>2</string>
                                  </array>
                        ]]></InfoAdditions>
    Secondly, neither debugging method connects. I have FB with the "waiting to connect message" and the iOS device with a Popup "waiting for AIR to connect...", but they never do. Am I missing something? Do I need iTunes on the windows machine for FB to recognize iOS device or do I need to load IPA with special commands? Thanks! I see a lot of hacked ways to do this via command line, but this is supposed to be working in FB 4.7 now.

    Hi ,
    iTunes should be installed on the machine for the USB debugging on iOS to work. Once the application is installed on the iOS device , manually launch the application to make debugger connection.
    Please post the screenshot of the error message .
    Thanks,
    Sanjay

  • Device testing with Shared Objects are failing: Error #2130

    This is new for me. I've made a bunch of apps with Flash Pro CC and Air. After the last CC update I can't run my builds on an iPad. They hang as soon as I try to flush a shared object. Any ideas? Is there a new permission setting I need to define? Here is what the debugger says:
    Waiting for Player to connect...
    Error: Error #2130: Unable to flush SharedObject.
              at Error$/throwError()
              at flash.net::SharedObject/flush()
              at CleverClimbers_fla::MainTimeline/frame1()[MyFile_fla.MainTimeline::frame1:133]
              at CleverClimbers_fla::MainTimeline/frame1()
    Cannot display source code at this location.
    Debug session terminated.

    Hi,
    I am not able to reproduce the issue.
    I tried with the latest AIR 4.0 build on iPad version 7.0 and Flash Pro CC version 13.1.0.217.
    Could you please share the Flash Pro version you are using?
    Also if possible, please share the sample app as it would help us in investigating the issue.
    Thanks,
    Pranali

  • [iPhone] How to delete Provisioning Profile, AppID (for device testing)

    Hi, on the developer portal, I'd like to get rid of the appID and provisioning profile.
    I have already deleted the certificate.
    I had removed the profile from Xcode organizer and that also removed the profile from my iPhone.
    However, http://developer.apple.com/iphone/manage/provisioningprofiles/index.action continues to list the profile. Its status is now marked as "Invalid" and clicking on the "Modify" button does nothing
    Does anyone know how to remove the profile from my program-portal settings. I'm assuming the profile is invalid because I've deleted the certificate.
    The ~/Library/MobileDevice/Provisioning Profiles directory is empty and I have no other subdirectories under ~/Library/MobileDevice. So I don't know where this profile is coming from
    I'd also like to delete the appID. Does anyone know how to delete an appID
    Btw I'm deleting all this because of the problem described in http://discussions.apple.com/thread.jspa?threadID=1735100

    After I added a second provisioning profile, the http://developer.apple.com/iphone/manage/provisioningprofiles/index.action page gave me a button to delete the first profile.
    So I was able to delete the first provisioning profile.
    I haven't found any way to delete an App ID.
    So for now, I'm just going to assume that Apple doesn't let developers remove any App IDs (even though it is the developers who create these App IDs)
    However, aside from the unnecessary clutter, I'm not concerned about this limitation
    was able to create a new App ID and I'm using the new AppID now.
    I was able to fix the problem decsribed in http://discussions.apple.com/thread.jspa?threadID=1735100. I'll update that thread after a while.

  • Getting warning while installing distribution certificate after device test successfully done

    I am getting warning when i created appstore method and installed distributted certificate: "A valid signing identity matching this profile could not be found in you keychain". Any solution for this..remaining all done. struck in this..

    I have given a proper entry in hosts file. The same problem persists. How did you restart the installation? Did you clean your previous installation?
    Might be because of corrupt zip files ?Could be. How did you create the stage area?

  • How to uninstall old versions of CS3, CS4, CS5 of Bridge, Device Central, and Extension Manager

    I have the following files:
    Adobe Bridge CS3
    Adobe Bridge CS4
    Adobe Bridge CS5.1
    Adobe Device Central CS3
    Adobe Device Central CS4
    Adobe Device Central CS5
    Adobe Device Central CS5.5
    Adobe Extension Manager CS4
    Adobe Extension Manager CS5
    Adobe Extension Manager CS5.5
    I want to delete the old versions of these files, but Adobe says I need to use the installers in Applications/Utilities/Adobe Installers, but there are no relevant files in that folder. Any ideas on how to do this properly on a Mac.

    That is correct Dancingjewel.  Migrating/transferring/copying Adobe applications is not supported and often leads to unexpected behavior.  To resolve this you will want to attempt to completely remove the current installations utilizing the CC Cleaner Tool and then reinstall.  If you need a fresh copy of the installation files they are available at Other downloads.

Maybe you are looking for