Dymanic parameter with LOV from command demanding a parameter

Hello,
I have a problem with creating dynamic parameters. I use different query to form list of values for the main query parameter. Let's say this parameter is manufacturer_name, so I'm selecting distinct manufacturer_name values from some table. But every time I run this report I want report to promt me with parameter (some special tag) for select some filtered manufacturers. But when I create LOV query with parameter (tag), report keeps asking me for this parameter forever and never gets to show parameter promt for the main query with LOV from the first one. Am I doing something wrong or what I want is just not possible?
Thanks
gemi

You might have given a default value to a main report command level parameter. Go to database expert in main report and edit the command level parameter and remove the default value in it.
and check the report.
Regards,
Raghavendra

Similar Messages

VBScript which is called with Arguments from Command Line

Hi There.
I have been tasked to create a VBScript which needs to accomplish the following:
It needs to be called from a command line using 4 different arguments, the arguments in order as follows:
-   Drive letter including colon
Warning threshold in percentage
Warning threshold in GB remaining
Recipient email address
I need to be able to set up a scheduled task, to run this script, but at the same time I need to be able to specify multiple drive letters as separate steps but on a single task. The script needs to automatically run every 4 hours, starting at 06:00AM
in the morning and running no later than 22:00 at night.
The end results, need to then be e-mailed to the Recipient which is specified in Argument (3).
Following is my current script, it is not complete as I am currently pulling my hair out due to having a lack of knowledge of VBScripting.... :( The current script also loops every 10 minutes or so, and uses the incorrect way of sending the results,
we would like to use POSTIE.EXE to send the mail as we would want to eliminate web traffic (Microsoft Schema's) in this script.
=====================================================================================
Const emailFrom = "default_from_email_address_comes_here" 'From email address
Const ExchangeServer = "ExchangeServerName_comes_here" 'Enter your Exchange server name here (FQDN)
Const WaitTimeInMinutes = 10 'Wait time between loops. This is will be in minutes
Dim WshShell, objArgs, strIP, objWMIService, LogicalVolumes, strDriveLetter
Dim objItem, strDriveName, IntCapacity, IntFree, DiskFreePct
Dim strIgnoreFlag
Dim strMessage, IntStatistic
on error resume next
strDriveLetter = WScript.Arguments(0) 'This is the drive letter which you want to monitor on the localhost
DiskFreePct = WScript.Arguments(1) 'This is the threshold percentage of free space
ThresholdGB = WScript.Arguments(2)
Recipient = WScript.Arguments(3) 'This is where the e-mail needs to be sent to
If Err.Number <> 0 Then
msgbox "You did not supply the arguments after calling the VBS file:" & vbcrlf & "<Drive Letter, eg: C:>"& vbcrlf & "<Warning Threshold in Percentage> "& vbcrlf &"<Warning
Threshold in GB Remaining> "& vbcrlf &"<Recipient E-Mail Address>"
WScript.Quit
End If
Set WshNetwork = WScript.CreateObject("WScript.Network")
WScript.Echo WshNetwork.ComputerName
arrServerList = array(WshNetwork.ComputerName) 'This is where your localhost will be used as the query
Do until i = 2
'Clear the message variable
strMessage = ""
'Poll the array of servers
PollServers(WshNetwork.ComputerName)
'Email if there is a message
if strMessage <> "" then
EmailAlert(strMessage)
end if
'The script will loop for now just for testing. Uncomment the line that follows the loop logic to cancel the loop.
WScript.Sleep(WaitTimeInMinutes*60000)
'i = i + 1
Loop
Sub PollServers(arrServers)
on error resume next
for each Server in arrServers
set objSvc = GetObject("winmgmts:{impersonationLevel=impersonate}//" & Server & "/root/cimv2")
set objRet = objSvc.InstancesOf("win32_LogicalDisk")
for each item in objRet
if item.DriveType = 7 then
end if
if item.FreeSpace/item.size <= AlertHigh then
strMessage = strMessage & UCase(strPC) & " Drive '" & item.caption & "' is low on disk space! There are " & FormatNumber((item.FreeSpace/1024000),0)
& " MB free" & vbCRLF
end if
next
next
set objSvc = Nothing
set objRet = Nothing
End Sub
Sub EmailAlert(Message)
on error resume next
Set objMessage = CreateObject("CDO.Message")
with objMessage
.From = emailFrom
.To = Recipient
.Subject = "Server " & WshNetwork.ComputerName & " is low on Disk Space"
.TextBody = Message
.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = ExchangeServer
.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25
.Configuration.Fields.Update
.Send
end with
Set objMessage = Nothing
End Sub

I've managed to get the script fully working as required.
================================================================
Const emailFrom = "your_email_here"      'From email address
Const ExchangeServer = "exchange_server_name"      'Enter your Exchange server name here (FQDN)
Const WaitTimeInMinutes = 240                   'Wait time between loops. This is will be in minutes
Dim WshShell, objArgs, strIP, objWMIService, LogicalVolumes, strDriveLetter
Dim objItem, strDriveName, IntCapacity, IntFree, DiskFreePct
Dim strIgnoreFlag
Dim strMessage, IntStatistic
Dim DrivePercentage
Dim DriveSpaceRem
Dim mbFreeSpace
Dim intFreeSpace
Dim UsedPercentage
on error resume next
strDriveLetter           = WScript.Arguments(0)   'This is the drive letter which you want to monitor on the localhost
DiskFreePct              = WScript.Arguments(1)   'This is the threshold percentage of free space
ThresholdGB              = WScript.Arguments(2)
Recipient                = WScript.Arguments(3)   'This is where the e-mail needs to be sent to
If Err.Number <> 0 Then
msgbox "You did not supply the arguments after calling the VBS file:" & vbcrlf & "<Drive Letter, eg: C:>"& vbcrlf & "<Warning Threshold in Percentage> "& vbcrlf &"<Warning Threshold in GB Remaining> "&
vbcrlf &"<Recipient E-Mail Address>"
WScript.Quit
End If
strComputer = "."
'WScript.Echo strComputer
Set WshNetwork = WScript.CreateObject("WScript.Network")
'WScript.Echo WshNetwork.ComputerName
arrServerList = array(strComputer)    'This is where your local host will be used as the query
Do until i = 1
    'Clear the message variable
    strMessage = ""
    'Poll the array of servers
    PollServers strComputer,strDriveLetter
    'Email if there is a message
    if strMessage <> "" then
        EmailAlert(strMessage)
    end if
    'The script will loop for now just for testing. Uncomment the line that follows the loop logic to cancel the loop.
    'WScript.Sleep(WaitTimeInMinutes*60000)
        i = i + 1
Loop
Sub PollServers(strComputer,strDriveLetter)
    Selectstring = "Select * from Win32_LogicalDisk Where DeviceID = '" & strDriveLetter & "'"
    on error resume next
    Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
    Set colItems = objWMIService.ExecQuery(Selectstring)
    For Each objItem in colItems
if objItem.FreeSpace/objItem.Size * 100 <= DiskFreePct or mbFreeSpace <= ThresholdGB then
     DrivePercentage = FormatNumber(objItem.FreeSpace/objItem.Size *100,0)
     DriveSpaceRem   = FormatNumber((objItem.FreeSpace/1024000),0)
     intFreeSpace    = objItem.FreeSpace
     mbFreeSpace     = intFreeSpace / 1024 / 1024 / 1024
     mbFreeSpace     = round(mbFreeSpace,0)
     intTotalSpace   = objDisk.Size
     UsedPercentage = 100 - DrivePercentage
          strMessage      = strMessage & " "
        end if
    Next
End Sub
Sub EmailAlert(Message)
    on error resume next
    Set objMessage = CreateObject("CDO.Message")
with objMessage
        .From = emailFrom
        .To = Recipient
        .Subject = "" & WshNetwork.ComputerName & ": Alert " & Now & " -> " & UCase(strDriveLetter) & " fill level = " & UsedPercentage & "%, Space Remaining = " & mbFreeSpace & "
GB"
        .TextBody = Message
        .Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
        .Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = ExchangeServer
        .Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25
        .Configuration.Fields.Update
        .Send
    end with
    Set objMessage = Nothing
End Sub
'WScript.Echo "done"

How to create a Parameter with LOV

Hello All,
I am having the follwoing custom query.
SELECT concatenated_segments, (SUM(PERIOD_NET_DR)-SUM(PERIOD_NET_CR)) MOVEMENT
FROM gl_balances a, gl_code_combinations_kfv b
where period_name='Apr-08'
and a.code_combination_id = b.code_combination_id
and set_of_books_id=1010
and currency_code='USD'
gROUP BY concatenated_Segments
HAVING (SUM(PERIOD_NET_DR)-SUM(PERIOD_NET_CR))<>0.
Instead of hard coding the values I have created the custom folder
with the follwoing query.
SELECT concatenated_segments, (SUM(PERIOD_NET_DR)-SUM(PERIOD_NET_CR)) MOVEMENT
FROM gl_balances a, gl_code_combinations_kfv b
where a.code_combination_id = b.code_combination_id
gROUP BY concatenated_Segments
HAVING (SUM(PERIOD_NET_DR)-SUM(PERIOD_NET_CR))<>0.
Now I have to create three input parameters period_name,set_of_books_id,currency_code.
The parameter set_of_books_id should have list of values so that the user will select one from it at run time. But when I tried to create the parameter
I am unable to create list of values for this parameter. (i.e in Parameter dialog box the For Item filed doest not have any field like set_of_books_id as it is custom query)
So how Can I add LOV for this parameter.
Kind Regards,
PRaveen.

Hi,
You custom folder needs to contain a statement like :
SELECT concatenated_segments, period_name,set_of_books_id,currency_code, (SUM(PERIOD_NET_DR)-SUM(PERIOD_NET_CR)) MOVEMENT
FROM gl_balances a, gl_code_combinations_kfv b
where a.code_combination_id = b.code_combination_id
gROUP BY concatenated_Segments, period_name,set_of_books_id,currency_code
HAVING (SUM(PERIOD_NET_DR)-SUM(PERIOD_NET_CR))<>0.
The you will have the period_name,set_of_books_id,currency_code items in the folder and can create parameters using these columns.
To define the LOV you will need to create separate folders that return the list of values required e.g.
SELECT set_of_books_id, name
FROM GL_SETS_OF_BOOKS
Use this folder to define an item class and then include the set_of_books_id from the first folder into the item class.
Rod West

How to play with javascripts from command line?

This is a problem that I always have no clue how to deal with.
To begin with, take a look at this page: http://jsharer.com/file/1345737.htm
If you click on "[TUTHE@ManYv][D`z][FLCL][05][H264_Vorbis][E4273181].mkv", after a little while a little window pops up and if you right click on the "点击此处开始下载", you can copy the direct download link.
I previously used a simple bash script using curl to parse direct download links from this site. I like to do it at command line. It was easy because the link used to be directly shown in the page source code (though I had to call curl twice for it, it was fine.)
But now I can't. It's all javascript. I ain't got no idea how to deal with this kind of stuff. I made my attempt to look at the page source, all I can tell is that the <div id="download_block"> part and the <div id="lord_content"> line seems to be important.
I want to use my old good command line instead of click click click!
Can somebody help me with this? Or please just give me some hints. It'd be fully appreciated. Thanks!

If you know python, the package community/python-mechanize lets you automate a lot of this kind of thing. You can tell it to go to url so-and-so, simulate a click on the third link matching regexp such-and-such, preserving cookies the original page gave you, and so on.
Has made most of my webpage scraping a hell of lot easier.
EDIT: but I don't know whether it processes embedded Javascript, perhaps not.
Last edited by Profjim (2009-09-03 11:22:37)

How to send Notification mail (with attachement) from On-Demand job

Hi Experts,
I am using SAP IDM 7.2 SP8.
Requirement is to send a notification mail to a specific mail address [email protected] whenever we run a on-demand job.
On-Demand job should also attach a csv file (atttachement.csv, which is in a specific folder D:\folder) while sending the notification mail.
Please help.
Thanks & Regards,
Chandan Kumar

Hi there,
It sounds like you have the basics all together. I would check how you are setting the following parameters of uSendSMTPMessage:
Attachment
Optional. Fully qualified file name of a file to be included as an attachment.
Multiple attachments can be added by separating the file names by a pipe character (|).
AttachmentType
Optional. Valid MIME attachment type.
Charset
Optional. Valid ISO character set identifier, for instance ISO-2022-JP. The default value is ISO-8859-1.
HeaderEncoding
Optional. 0: Plain text, 1: Base64. Default: 0
TransferEncoding
Optional. 1: 7bit, 2: 8bit, 3: Quoted ASCII, 4: Base64. Default: 4.
Sorry the first row got mangled a bit.
Matt

Passing where clause with spaces from forms to reports

Hi,
Has anybody passed where clause as lexical parameter with spaces from forms to preports..
I have seen people mention that, we can replace the spaces with special characters and then replace it again in the before trigger report..does anyone have a working example of that??
Thanks.

i solved the issue..
i had written the procedure in the before report
trigger instead of writing it in the before parameter
form trigger..
it works perfecto now..
Thanks.We had removed the spaces and used commas to delimit each item.
So you are saying spaces are not a problem in 10g?

Error while running a Discoverer Workbook with parameter from command line

I am trying to run a discoverer report from command line and export the results in xls on to my local machine. I could do it fine for a simple workbook, but if I add a parameter(madatory) to the workbook and run it from command line specifying the parameter value I wanted to run the report for, I do not get any results. Here is the command line I am using.
dis51usr.exe /connect user/password@database /apps_user /apps_responsibility "System Administrator" /eul EUL_US /open C:\Disco\Test.DIS /sheet Testsheet /parameter Period Jan-07 /export xls C:\Disco\X.xls /batch
Parameter value is entered in correct format(Jan-07).
When I removed /batch from this to see if I get any error, Discoverer Desktop opened up, logged in and gets terminated saying 'Oracle Discoverer Desktop has encountered a problem and need to close. We are sorry for the inconvenience.'
Did anybody come across this issue before?

Hello,
If you have a few minutes, Windows is also aborting for me:
the differences are, my situation is:
a) am running the command line from a .bat file
b) am NOT running with parms, want the discoverer query to come up for the user
c) am running a query from the database
i am signing in as myself BUT running a query that was created by a generic user called SREG
c) if i run the .bat file from Windows Explorer, the query opens fine
d) if i execute the .bat file from within Microsoft Access using the shell command,
the query opens and then aborts RIGHT BEFORE the parm screen would display
e) btw, if i modify the .bat file, to run a query from MY database signon, then (d) - running .bat file
from vb using SHELL command works
Do you have a ideas as to why (d) does not work? I would be very grateful for your time, tx, sandra
this is what i posted yesterday, tx: Re: Running Discoverer command line
tx, sandra

I am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error

i am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
here is my listener file
lsn =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.125.128)(PORT = 1575))
#ADR_BASE_LISTENER = /u01/app/oracle
(SID_LIST_LISTENER=
(SERVICE_NAME=kull)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1)
tnsnames.ora
to_lsn=
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = kull )
my database name is kull
please somebody help

Biswaranjan wrote:
i have two database one is kull and another is kk
i configured listener.ora in kull
and tnsnames.ora in kk
when i am running lsnrctl start listener in database kull
This makes no sense. You don't configure a listener nor a tnsnames.ora "in a database".   I hope this is just a language issue and not reflective of a fundamental misunderstanding of how tns works.
read: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ Help! I can’t connect to my database
read: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ Help! I can’t connect to my database (part duex)
it is showing the message
Alias                     lsn
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                05-JUL-2013 19:08:06
Uptime                    0 days 0 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/product/11.2.0/db_1/log/diag/tnslsnr/server1/lsn/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1575)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server1)(PORT=1575)))
The listener supports no services
The command completed successfully
and in another database in kk when i am giving the command tnsping to_lsn
it is giving this message
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = kull)))
OK (0 msec)
but when i am cross check sqlplus system/manager@ to_lsn
it is giving the following error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor

Send parameter with button_click command

I'm clicking a button programmatically (in WinForms) and I need to know from which method the invocation is taking place. For example, in pseudo-code:
cbProposalName_SelectedIndexChanged(object sender, EventArgs e)
string callingMethod = "cbProposalName";
btnDisplay_Click(null, null, callingMethod);
btnDisplay_Click(object sender, EventArgs e, string callingMethod)
if (callingMethod == "cbProposalName")
use query1
else
use query2
Is there some way to send a parameter with btnDisplay_Click(null,null)?
timSF

Calling event handlers directly from code is seldom a good idea. I suggest a different approach.
cbProposalName_SelectedIndexChanged(object sender, EventArgs e)
UseQuery("cbProposalName");
btnDisplay_Click(object sender, EventArgs e, string callingMethod)
UseQuery("SomethingElse");
void UseQuery(string callingMethod)
if (callingMethod == "cbProposalName")
use query1
else
use query2

The 'Replace with clip from Bin' command doesnt work... or freezes and crashes Premiere

I'm not exactly sure where I should begin on this issue... re-install?
Thx,
David

Yes, of course. And even if I hadn't, that wouldn't explain Premiere freezing
or crashing. Let me ask this. Is there a maximum amount of clips or some kind of RAM use tipping point where Premiere just can't handle anymore references? That is the only thing I can think of that would possibly cause this sudden glitch or some kind of coding error, like the 'replace with clip from bin' command can only handle 'x' file references somehow... I have about 300 AVCHD clips and 200 HD .mov files in the project panel. What do you think?

Issue with Executing OS commands from Stored Procedure

I am trying to execute the scripts provided at :
http://github.com/xtender/XT_SHELL
provided by xtender user.
As required, I have asked my DBAs to grant privileges by executing the following scripts:
Begin
--change to needed permissions and execute
dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/factiva/ODS/bin/CVIM_Rpt_ExportCSVFile’, 'read,write,execute' );
end;
/where CVIM_Rpt_ExportCSVFile is my script residing in the Unix server where my Oracle is installed.
The error I am facing when I try to execute the following command is:
select * from table(xt_shell.shell_exec('/var/scripts/CVIM_Rpt_ExportCSVFile',100))
Exception:the Permission (java.io.FilePermission /var/scripts/CVIM_Rpt_ExportCSVFile execute) has not been granted to ODS. The PL/SQL to grant this is dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/scripts/CVIM_Rpt_ExportCSVFile', 'execute' )I have asked my DBA to also execute the following scripts: - But I still see the same error as above. I am not able to figure out whats going on. Can anyone pls help me out??
EXEC Dbms_Java.Grant_Permission('ODS', 'SYS:java.lang.RuntimePermission', 'writeFileDescriptor', '');
EXEC Dbms_Java.Grant_Permission(ODS', 'SYS:java.lang.RuntimePermission', 'readFileDescriptor', '');
dbms_java.grant_permission( 'ODS', 'SYS:java.io.FilePermission', '/var/scripts/CVIM_Rpt_ExportCSVFile', 'execute' )

DUPLICATE
===============================================================
Issue with Executing OS commands from Stored Procedure
==============================================================

My "undo" command does not work in the new version of GB. Please advise. This is a real problem. I had no issues with GB from iLife 11.

My "undo" command does not work in the new version of GB. Please advise. This is a real problem. I had no issues with GB from iLife 11.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Problem with tokenized input from command line

I am trying to take an input from the command line, parse it to tokens and perform whatever operation is needed depending on the name of the token, on a binary tree of stacks for example, if i type 1 2 1 3 printLevelOrder, then the root of the tree should have 3, 2,1 in the stack, the left child should have 1 and the right child should be empty. and then a level order print of the tree should be performed.
however what is happening when i run this code is the numbers are being put into the right stacks of the tree, but any commands such as printLevelOrder or PrintPopRoot are entering the code that is for placing numbers onto the stack instead of executing that command and skipping past this piece of code.
so my question is, why is the if statement if (word =="printLevelOrder") not being executed when thats whats in the word ?
example input and output shown below code fragment.
          try {
              BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
             String line = "";
             while (line != "***") {
                  System.out.print("> prompt ");
                  line = in.readLine();
                  StringTokenizer tokenizer = new StringTokenizer(line," ");
                  String word = new String();
                  while (tokenizer.hasMoreTokens()) {
                         word = tokenizer.nextToken();
                         boolean notCommand = true;
                         if (word =="printLevelOrder") {
                              theTree.printLevelOrder();
                              System.out.println("(word ==printLevelOrder)");
                              notCommand=false;
                         if (word == "printPopLevelOrder") {
                              theTree.printPopLevelOrder();
                              notCommand=false;
                         if (word == "printPopInorder") {
                              theTree.printPopInorder();
                              notCommand=false;
                         if (word == "printPopPreorder") {
                              theTree.printPopPreorder();
                              notCommand=false;
                         if (word == "printPopRoot") {
                              theTree.printPopRoot();
                              notCommand=false;
                         if (word == "***") {
                              notCommand=false;
                         if (notCommand == true) {
                              System.out.println("(notCommand == true)");
                              boolean notPlaced = true;
                              int v = 1;
                              while ((notPlaced==true) && (v < theTree.size())) {
                                   if (theTree.element(v).isEmpty()) {
                                        theTree.element(v).push(Integer.valueOf(word));
                                        System.out.println("Inserting"+word);
                                        System.out.println("in empty stack at location: "+v);
                                        notPlaced=false;
                                   if (notPlaced==true) {
                                        if ( Integer.valueOf(word) >= Integer.valueOf( theTree.element(v).top().toString() ) ) {
                                             theTree.element(v).push(Integer.valueOf(word));
                                             System.out.println("Inserting"+word);
                                             System.out.println("in stack at location: "+v);
                                             notPlaced=false;
                                   v++;
          }valid inputs: int value, printLevelOrder, printPopLevelOrder, printPopInorder, p
rintPopPreorder, printPopRoot, *** to quit
prompt 1 3 2 4 2 printLevelOrder(notCommand == true)
Inserting1
in empty stack at location: 1
(notCommand == true)
Inserting3
in stack at location: 1
(notCommand == true)
Inserting2
in empty stack at location: 2
(notCommand == true)
Inserting4
in stack at location: 1
(notCommand == true)
Inserting2
in stack at location: 2
(notCommand == true)
Exception in thread "main" java.lang.NumberFormatException: For input string: "printLevelOrder"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Integer.parseInt(Integer.java:447)
at java.lang.Integer.valueOf(Integer.java:553)
at TreeStack.main(TreeStack.java:73)
Press any key to continue . . .

lol aww, shame that you forgot to do that. i had 10 / 10 for mine, and seing as the deadline is now well and trully over,
here is the entire source for anybody who was following the discussion or whatever and wanted to experiment.
additional files needed >
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/Stack.java
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/ArrayStack.java
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/StackEmptyException.java
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/StackFullException.java
/*TreeStack.java - reads command line input of values and assigns them to stacks in a binary tree and performs
operations on the ADT. valid inputs: <int>,   printLevelOrder,   printPopLevelOrder,
printPopInorder,   printPopPreOrder,   printPopRoot.         Terminates on invalid input.
Written by George St. Clair.
S/N:0208456         22/11/2005
import java.util.Vector;
import java.io.*;
import java.util.StringTokenizer;
public class TreeStack {
     private final int TREE_CAPACITY = 7 + 1;
     private final int STACK_CAPACITY = 10;
     Vector tree = new Vector(TREE_CAPACITY) ;
     //collect input from command line, add values to stacks at nodes of the teee
     //and perform required operations on the treestack
     public static void main (String [] args) {
          //create a tree of stacks
          TreeStack theTree = new TreeStack ();
          try {
               //collect standard input
              BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
             String line = "";
             while (line != null) {
                    System.out.print("");
                  line = in.readLine();
                  //tokenise input
                  StringTokenizer tokenizer = new StringTokenizer(line," ");
                  String word = new String();
                  while (tokenizer.hasMoreTokens()) {
                         //assign word to the token
                         word = tokenizer.nextToken();
                         boolean notCommand = true;
                         //perform operation on treestack depending on what word is
                         if (word.equals("printLevelOrder")) {
                              System.out.println("printLevelOrder");
                              theTree.printLevelOrder();
                              notCommand=false;
                         if (word.equals("printPopLevelOrder")) {
                              System.out.println("printPopLevelOrder");
                              theTree.printPopLevelOrder();
                              notCommand=false;
                         if (word.equals("printPopInorder")) {
                              System.out.println("printPopInorder");
                              theTree.printPopInorder();
                              notCommand=false;
                         if (word.equals("printPopPreorder")) {
                              System.out.println("printPopPreorder");
                              theTree.printPopPreorder();
                              notCommand=false;
                         if (word.equals("printPopRoot")) {
                              System.out.println("printPopRoot");
                              theTree.printPopRoot();
                              notCommand=false;
                         //if word was not a command it must be a number
                         if (notCommand == true) {
                              boolean notPlaced = true;
                              int v = 1;
                              //starting at the root, find suitable place for number
                              while ((notPlaced==true) && (v < theTree.size())) {
                                   //if the stack at v is empty, number goes here
                                   if (theTree.element(v).isEmpty()) {
                                        theTree.element(v).push(Integer.valueOf(word));
                                        System.out.println("inserting: "+word);
                                        System.out.println("in empty stack at location: "+(v-1));
                                        notPlaced=false;
                                   //if the stack is not empty
                                   if (notPlaced==true) {
                                        //if the value on the top of the stack is smaller than number, number goes onto the stack
                                        if ( Integer.valueOf(word) > Integer.valueOf( theTree.element(v).top().toString() ) ) {
                                             theTree.element(v).push(Integer.valueOf(word));
                                             System.out.println("inserting: "+word);
                                             System.out.println("in stack at location: "+(v-1));
                                             notPlaced=false;
                                   //if that node was no good, check the next one for suitability
                                   v++;
          catch (Exception e) {
               //occurs when user inputs something that is neither a command, or a number, or upon EOF, or stack is full
     public TreeStack () {
          //create the TreeStack ADT by adding stacks in the vector, note vector 0 is instantiated but not used.
          for (int i = 1;i<=TREE_CAPACITY;i++)
               tree.add(new ArrayStack(STACK_CAPACITY));
     public int size() {
          //return the size of the tree +1 (as 0 is not used)
          return tree.size();
     public ArrayStack element (int v) {
          //return the ArrayStack at v
          return (ArrayStack)tree.get(v);
     public int leftChild (int v ) {
          //return left child of v
          return v*2;
     public int rightChild (int v ) {
          //return the right child of v
          return v*2+1;
     public boolean children (int v ) {
          //search for children of v and return true if one exists
          for (int i =v;i<size();i++) {
               if (i/2==v ) {
                     //left child found at i
                     return true;
               if ((i-1)/2==v ) {
                    //right child found at i
                    return true;
          //no children found
          return false;
     public boolean isInternal (int v ) {
          //test whether node v is internal (has children)
          if (children (v)== true) {
               //has children
               return true;
          return false;
     //print the top value in each stack encountered on a level-order traversal of tree
     public void printLevelOrder() {
          //for every node of tree v
          for (int v = 1;v<size();v++) {
               if (!element(v).isEmpty() ) {
                    //print the top value in stack v
                    System.out.println(" "+element(v).top());
               else {
                    //stack at v is empty
                    System.out.println(" -");
     //pop off and print the top value in each stack encountered on a level-order traversal of tree
     public void printPopLevelOrder () {
          //pop off and print the top value in stack v
          for (int v = 1;v<size();v++) {
          //for each node of tree v
               if (!element(v).isEmpty() ) {
                    //if v isnt empty print the top value in stack v
                    System.out.println(" "+element(v).top());
                    //pop the top value in the stack at v
                    element(v).pop();
               else {
                    //stack at v is empty
                    System.out.println(" -");
     //pop off and print the top value in each stack encountered on an in-order traversal of tree
     public void printPopInorder () {
          printPopInorder (1);
     public void printPopInorder (int v) {
          boolean isInternal = false;
          if (isInternal (v)) {
               //use a boolean for isInternal to save on running the method twice
               isInternal = true;
               //recursively search left subtree
               printPopInorder (leftChild(v));
          //pop off and print the top value at v
          if (element(v).isEmpty() ) {
               //stack at v is empty
               System.out.println(" -");
          else {
               //if v isnt empty print the top value in stack v then pop
               System.out.println(" "+element(v).top());
               element(v).pop();
          if (isInternal ) {
               //recursively search right subtree
               printPopInorder (rightChild(v));
     //pop off and print the top value in each stack encountered on an pre-order traversal of tree
     public void printPopPreorder() {
          printPopPreorder(1);
     public void printPopPreorder(int v) {
          //pop off and print the top value at v
          if (!element(v).isEmpty() ) {
               //if v isnt empty print the top value in stack v then pop
               System.out.println(" "+element(v).top());
               element(v).pop();
          else {
               //stack at v is empty
               System.out.println(" -");
          if (isInternal (v)) {
               //recursively search left and right subtrees
               printPopPreorder (leftChild(v));
               printPopPreorder (rightChild(v));
     //pop off and print all values from the stack at the root
     public void printPopRoot (){
          //while the root stack has values left
          while (!element(1).isEmpty()) {
               //print, then pop
               System.out.println(" "+element(1).top());
               element(1).pop();
}

VPN Client disconnection from command line

Hi,
I want to connect to IPsec VPN on ISA500 by VPN Client (v 5.0.07.0440, the last version, I think), using command line parameters.
I can connect with the command:
"%programfiles%\Cisco Systems\VPN Client\ipsecdialer.exe" -c -user myUser -pwd myPassword "MyConnectionEntry"
but i don't know the command to disconnect from command lines.
If I do
"%programfiles%\Cisco Systems\VPN Client\ipsecdialer.exe" -?
I obtain the list of parameters
vpngui [-c | -sc [sd] [-user <username>] [-pwd <password> ! -eraseuserpwd]] <connection entry>
but I don't unterstand what I have to do... I try every combination using -sd parameter (I think means for silent disconnect), but in every case I can only to show VPN interface without disconnect anything...
Can anyone help me?
Thanks

Prasath,
This appears to be a data flow issue. You need to look in the dataflow log file. Your information indicates the project name is SAMPLES.xml, and the data flow ID is D20091213_014350765. Look at the data flow log file in
C:\dqxi\11_7\repository\configuration_rules\runtme_metadata\project_SAMPLES\D20091213_014350765
Alternatively, you can temporarily replace the transactional reader and writter transforms with their corresonding batch transforms, and run the job from the Project Architect. Any errors will be displayed in the Running window.
Paul

To run a report from command line, when using jdbc-odbc bridge

Hi,
How to run a report from command line, when using jdbc-odbc bridge?
Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
Please specify, what is command line arguments for jdbc-odbc bridge driver?
Environment : Oracle 9i Report Builder on WinNT
Database : Sybase
Regards,
Ramanan

Hello Ramanan,
Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
JDBC PDS allows user to connect one or more same or different kind of databases.
While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
rwrun eg :
rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
Server eg :
http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
http :
Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
With Regards
Reports Team

Dymanic parameter with LOV from command demanding a parameter

Similar Messages

Maybe you are looking for