Dynamic Action on IT0002 for France-Molga 06

Hello,
I would like to set up a dynamic action on IT0002 for France (Molga 06) - field State - 'GBDEP'.
The field 'GBDEP' is a mandatory field for France, but the business is not maintaining the record of the Birth State of an employees.
So I would like to set up a dynamic action to create a default value for this field. The default value created is 999 and it will filled while creating IT0002 record for France during Hiring Action.
I am not quite well versed with dynamic action, so i would appreciate a help in how to set up this dynamic action.
I can share if more information is needed.
Thanks in advance.

Try this dynamic action:
INFTY     SUBTY     FNAME     OPERA     SEQNO     KENNZ     VINFO
0000               06     10     *     *FRANCE DEFAULT GBDEP
0000               06     12     P     PSPAR-TCLAS='A'
0000               06     14     P     T001P-MOLGA='06'
0000               06     16     P     PSPAR-MASSN='XX'
0000               06     18     I     INS,0002,,,(P0000-BEGDA),(P0000-ENDDA)
0000               06     20     W     P0002-GBDEP='999'
Here, XX is your hiring action code. Also, make sure you have a 999 entry in V_T005S for FR.
Hope this helps.
Donnie

Similar Messages

Standard Dynamic action set up for country USA

Hi All,
Could anybody tell me where can search standard dynamic action set up for country USA.
Regards
Sirisha

Go to table V_T588Z and then enter the infotype for which you are checking. Then click on the Selection option from the menu, and then By Contents. you will get a small popup of the table fields. Scroll to the end and select "Var. function part" and then click on the green tick. Then in the Field contents enter - T001P-MOLGA='10' then select choose.
You will then get all the D'actions for the US. Make a note of the numbers under the column FC & No. Then go back and then check the rows as per the noted number combinations. Thats all you have all the D'actions maintained for US.

Dynamic action for IT0015 & IT0014

Hello All,
I want to create a dynamic action for the following scenario:
Whenever employee is moved form Payroll area 99 to any other payroll area then IT0015 & IT0014 will be created with the date as effective date (not system current date).
I.e if emp is hired on 01.02.2008 & if he is moved form payroll area 99 to any other payroll area then IT0015 & 0014 will get created with effective date i. e 01.02.2008 & not current date.
Please help me out for same. I am new in this filed of dynamic actions.
Valuable points are assured...
Regds,
Nithi

Hi Nalla & sikander,
I have created the dynamic action as below for UK;
****CREATE IT14&15 WHEN PAY AREA CHANGE TO 99**
0001 02 001 P T001P-MOLGA='08'
0001 02 002 P P0001-ABKRS<>'99'
0001 02 002 P INS,0014,,,(P0000-BEGDA),(P0000-ENDDA)
0001 02 002 P INS,0015,,,(P0000-BEGDA),(P0000-ENDDA)
The above dynamic action is not working when the payroll area is changed from 99 to aby other payroll area.
Kindly suggest where i am going wrong.
Regds,
Nithi

Can we create a dynamic action for Training and Event Management???

Hi All
i need to configure automatic email generation for an employee when he gets booked for a training program in the training and event management module. can we use a dynamic action for it? and how to configure it?? I also guess that i have to use the Feature MAILS for it. but i am not sure abt it and also not sure how to configure it. I will really appreciate if someone can provide me with a step to step configuration for the same. Its urgently sought.
Thanks and Regards

Notifications in T&E are done through Workflow.Dynamic Actions are only for PA Infotypes.
~Suresh

Dynamic action to create ESI record

Friends
I am using the following code to create ESI record in infotype 588 in Dynamic actions and working for a single payroll area.
0001
04
862
P
T001P-MOLGA='40'
0001
04
863
P
PSPAR-MASSN='S1'
0001
04
864
P
P0001-ABKRS='P3'
0001
04
865
P
P0001-PERSK='W0'
0001
04
866
F
GET_DATE(HBRDYNMS)
0001
04
867
I
INS,0588,0001,,(P0000-BEGDA),(P0000-ENDDA)/D
My requirement is PERSK is same for various payroll areas, hence don't want to create separate codes.
I am trying to insert multiple payroll areas in line no. 864 with the following code
0001 04 864 P0001-ABKRS = 'P1' OR P0001-ABKRS = 'P3' OR P0001-ABKRS = 'P5'/X
But the record is not getting created.
Pl. help to use multiple payroll area option.
regards
Raghuram R

If you are useing for multiple area please use the below
6
1
P
P0001-ABKRS='XX' /X
6
2
P
P0001-ABKRS= 'XX' /X
you shoduld use all the payroll areas with /X which say if payroll X or Y but not only or after X.

How to get the User input of Dynamic Action confirmation message ?

Hi Guys,
I'm using apex 4.1,
I have added a confirmation message box as page Dynamic Action. How can i get the user input of that confirmation pop up ?
Thanks

Hi,
you don't directly get the user input. But you should still be able to get what you want. Let's assume you have a dynamic action which fires for a "Change" (or any other) event and which has two or more actions
1) Confirm
2) Execute PL/SQL Code
If the user clicks Cancel/No in the confirm dialog, APEX will stop the execution of this dynamic action and not run "Execute PL/SQL Code".
Hope that helps
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Dynamic actions in richfaces

I have the following menu builder method, suppose it navigate to the to binding Expression
but i did nothing, and there is no exception
public void setMenu(HtmlDropDownMenu menu) {
          this.menu = menu;
          this.menu.getChildren().clear();
          HtmlMenuItem item;
          for(Object obj : menuList){
               item = new HtmlMenuItem();
               Application app = FacesContext.getCurrentInstance().getApplication();
               MethodExpression mBinding =
                    app.getExpressionFactory().createMethodExpression(FacesContext.getCurrentInstance().getELContext(), "#{taskBarImpl.nav}",String.class ,new Class[]{ });
               item.setActionExpression(mBinding);
               item.addActionListener(new MethodExpressionActionListener(mBinding));
               addToMenu(item, obj.toString());
     }

Hi Abbas,
Dynamic actions are not supported for Tabular Forms in a standard APEX way yet.
The only workaround is to use CSS classes inside your tabular form. Your Dynamic action will fire for any action on this class!
Tobias

Call a routine in a dynamic action.

Hi Experts,
i want to write a routine in which i can give the error msg while saving the infotype 0002 incase the given condition is not fulfilled.
Can you tell me where i can write this routine and how to call it in a dynamic action.
i hav written other types of dynamic actions before but never called any routine before
Plz give me the detailed info regarding writing a routine.
regards
TS

Hello TS,
You can do that using F in Indicator for step but iam not sure whether it will return an error message. We have user exits for this which might solve your issue. We have userexit PBAS0001 and in this EXIT_SAPFP50M_002 Function module, we need to write the code which ever you want to do.
For Calling FORM in Dynamic actions.
P - Check conditions
I - Maintain infotype record
W - Set default values when creating a new record
V - Reference to another step
F - Call routine
M - Send mail
Say you have a program ZTEST. In this you need to write the form that needs to be called in dynamic action and say for ex:form_test.
You can fill only structure RP50D values, because these values you can get it back to dynamic action. ypu can check for examples in dynamic actions it self which have 'F' indicator step.
Regards,
Kiran I

How to maintain Dynamic Action for Infotype 2 .

Hi SAP-HR Experts .
I want to maintain Dynamic Action for Infotype 2 .
If Employee's No. of Children exceeds then System immediately ask for maintenence of IT-21 also at the same time .
How to maintain code in table V_T588Z .
Please elaborate it .
Thanks & Regards : rajneesh .

Hi kanupriya .
your reply was Very helpful for me u2026But i unable to achieve the desired result . I maintained the entries in View V_T588Z like this .My Objective is when some body update the Infotype 2 for a employee , and his/her no. of Childrens exceeds by 2 then system should jump into IT-21 for
updation of IT-21 at the same time . I think this what Dynamic Actions work out .
==========================================================
     ANZKD 04 500 P PSPAR-TCLAS='A'
     ANZKD 04 175 P T001P-MOLGA='40'
     ANZKD 04 176 P P0002-ANZKD>='2'
     ANZKD 04 177 I INS,0021,2,01
     ANZKD 04 178 I INS,0021,2,02
==========================================================
Please suggest me what to do , as the above entries are not workout .
Your help will be very appreciated.
Regards ,
rajneesh(9873607039)

Dynamic actions for IT0171

Hi All,
I Just need to insert the new Employee sub group in the existing dynamic action. The logic is already there and I just need to insert the ne one additional Employee subgroup in the dynamic actions.
So how to identify the existing dynamic action and add the new employee subgroup to this existing dynamic action, please let me know the steps.
Thanks,
Lisa

Donnie,
here is the screen shot from existing one:
0001                                            06             700                  **** CREATE IT0171 FOR
0001                                            06             701             P    PSPAR-MASSN='01'/X
0001                                            06             702             P    PSPAR-MASSN='12'/X
0001                                            06             703             P    T001P-MOLGA='10'
0001                                            06             704             P    P0001-PERSG='1'
0001                                            06             705             P    P0001-PERSK='U1'/X
0001                                            06             706             P    P0001-PERSK='U2'/X
Do i need to go to dev and go this table T588Z and insert the new Employee sub group ? please let me know the steps.
Thanks,
Lisa

Dynamic Action with KeyCode check for ENTER button pressed

Hi,
I want to create a dynamic action which executes if the ENTER button of field P1_NAME is pressed.
I thought about this type of DA:
Event: Key Press
Selection Type: Item(s)
Item(s): P1_NAME
Condition: Javascript expression
Value: this.triggeringElement.keyCode == 13
That unfortunately doesn't work! Dynamic action doesn't get executed...
Hope for help! :)
Tobias

I found the solution in my own blog: :)
Event: Key Press
Selection Type: Item(s)
Item(s): P1_NAME
Condition: Javascript expression
Value: this.browserEvent.keyCode == 13

Dynamic Action on tabular form: to auto set value for all changes rows

Hi All:
I am using APEX4.2.3 and I am not very familar with JQUERY or Javascript.
I am having a tabular form to support Update and Delete action. The tabular form has 4 columns:
Column A: ID                      (Number)     : Read-only column
column B: Name                 (Varchar2)   : Editable
Column C: Age                    (Number)     : Editable
Column D: ChangeFlag      (Varchar2)   : Read-only column                             ==> however, I want this column been automatically upldated by my APEX application
Here is the requirement: First user update Column B, or C or both for # of rows; then user click "Save Change" button. For ALL updated rows, I need to automatically update Column D with below logic:
For a given row,
               IF Column D IS NULL THEN
                     set value = 'M'                           -- M means modified
               ELSE --- column D has a value already
                    IF last character of Column D is 'M', THEN
                           don't do anything;
                    ELSE
                          set value of D = existing value + 'M'                       (here + means concatenate
                   END IF;
            END IF;
I thought this can be done by creating dynamic action on tabular form ... I have researched this on this forum and can't find a good match example ..
I know I can implement this using a DB trigger; however, I want to learn if this can be achived via Dynamic Action.
Thanks!
Kevin

Hi Expert:
Anyone can offer any direction or help on this?
Thanks!
Kevin

Regarding an error in Dynamic action for hiring

Hi Experts,
when i perform a hiring action"AA" for action type "02" or "01" using a dynamic action .it is throwiing an error.
" perform not found" "CX_SY_DYN_CALL_ILLEGAL_FORM"
"MP000000" OR " MPPERS00"
"MEASURE"
please let me know how to proceed .
regards
Vishnu

Hi Vishnu,
this might just give you a clue and as suggested by our mate,you may need to debug it and see the code.
PERFORM_NOT_FOUND short dump
http://help.sap.com/abapdocu_70/en/ABAPPERFORM_GENERAL.htm
No Worries
KG
Edited by: SAPenjoy:) on Sep 6, 2010 8:44 AM

How to specify 2 conditions in when settings for 2 items in dynamic actions

Hi,
How to use 2 conditions for 2 different items in Page rendering ->dynamic actions-------when event settings
Actually i have three items like A nd B nd c
If A=v,x,y,z and B=k,l............ i need to set some content like
"werttyyyy" in c and i need to make it as disable
if A=v,x and B=k ..................
i need to enter the text in c which i would like to be freetext and i need to make it as enable now
here it is i struck ------------Page rendering ->dynamic actions-------
when
event
change
select type
items
items
a,b
condition
<<<<<< how to mention my condition in tis column>>>>>>>>>>>>>>>>>>>>>>>
Regards,
Pavan

Hi JTan414,
I have check the expression you have provided and there are many incorrect using of this expression, please check and do some modification as below:
For the MonthName function you should follow the grammar like:
=MonthName(10,True)
=MonthName(Month(Fields!BirthDate.Value),False)
="The month of your birthday is " & MonthName(Month(Fields!BirthDate.Value))
You have add the dataset name "DealStarts" at the wrong place, it should like below:
=Last(MonthName(Month(Fields!BirthDate.Value)),"DealStarts")
or
=Last(MonthName(Fields!IntegerValueField.Value),"DealStarts")
This will return the last value from the dataset
There is no function named launchdate, expression "launchdate ("RowofTrendingVisibility")" is incorrect and you shouldn't add the datasetname in this way.
If the expression involved of conditions from two different datasets, limit kinds of functions will support to use:
=Last(Fields!BirthDate.Value,"DataSetName")
=First(Fields!BirthDate.Value,"DataSetName")
More details information about how to use expression in SSRS:
Expression Examples (Report Builder and SSRS)
If you still have any problem, please try to provide more details information about your requirements and also some sample data.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Dynamic action for a text fiel in a tabular form

for a text field of a, wizzard generated, tabular form i created a dynamic action when lost focus. using a jquery selector to bind the da to the item in every row
when the event fires some jscript and pl/sql code is executed. this all works like charm for existing rows.
but how can i bind the da to the field for newly added rows?
a sc of the definition of the da can be found here https://dl.dropbox.com/u/25663382/SNAG-0043.jpg
APEX 4.1.1.00.23
any idea?
thanks in advance
peter

Just change the bind to live
That will do the trick
http://stackoverflow.com/questions/937039/what-is-the-difference-between-the-bind-and-live-methods-in-jquery

Dynamic Action on IT0002 for France-Molga 06

Similar Messages

Maybe you are looking for