Dynamic Actions...Help

Hi Guys,
During a new hire, standard SAP process is to pop up Benefits Enrollment screen immediately after we maintain IT 171.
In my case, i would like to be taken to IT 378 (Benefits Adjustment reason) immediately after i maintain IT 171 (general benefits info), and then i should be taken to Benefits Enrollment screen (1st IT 171, 2nd IT 378, 3rd Enrollment Screen).
I guess we could do it through Dynamic Actions, but i am not sure how we do it.
Can someone help me step by step.
Thank a lot!

instead, You can add those infotypes in the infogroup used for your hiring action. Try that

Similar Messages

Dynamic Action-help needed

Hi ,
My requirement is in dynamic Action I need to delimit all records in a Subtype of an Infotype and create New record for these records with BEGDA as ENDDA + 1 of the delimited records.
Iam able to delimit all records in the Subtype but , Iam not able to create new records.
My code for delimiting is as given below, in T588Z,
9901 2 06 801 P P9901-SUBTY='2'
9901 2 06 802 P PSYST-IOPER='MOD'
9901 2 06 803 P P9901-STATS='X'
9901 2 06 804 P P9901-PREAS='91'
9901 2 06 805 F DELIMIT_DTE(ZHSRAS_T588Z_9901)
9901 2 06 806 W P9901-ENDDA=RP50D-ZZDATE3
9901 2 06 807 I MOD,9901,3
9901 3 06 808 P SY-UCOMM='UPD'
9901 3 06 809 F DELIMIT_DTE(ZHSRAS_T588Z_9901)
9901 3 06 810 W P9901-ENDDA=RP50D-ZZDATE3
The above code is working fine.
My code for creating new record is as given below, even though the control is oing to the subroutine, INS statement is not working, and hence new record is not getting created.
9901 3 06 811 P SY-UCOMM='UPD'
9901 3 06 812 P PSAVE-ENDDA<>P9901-ENDDA
9901 3 06 813 P P9901-STATS<>'X'
9901 3 06 814 I INS,9901,3
9901 3 06 815 F BEGIN_DATE(ZHSRAS_T588Z_9901)
9901 3 06 816 W P9901-BEGDA=RP50D-ZZDATE3
9901 3 06 817 W P9901-ENDDA='99991231'
Kindly help me on this.
Thanks in Advance

hi,
thankyou for all ur valuable replies.
Time constraint for this custom infotype is 2.
It is not allowing to create a new subtype record if 1 exists.
Here scenerio is
Each Subtype ,ie, Subtp 2 ad 3 has got 4 records each with distinct OBJPS field.
when STATS field of subtype 2 is changed for any 1 record in Subtype 2, corresponding record in Subtype 3 should get delimited .
And, rest of the records of Subtype 3 should get created again with new start date.
The code I have written for this is ,
9901 2 06 800 *BEG*****DEATH OF WIDOW*****************
9901 2 06 801 P P9901-SUBTY='2'
9901 2 06 802 P PSYST-IOPER='MOD'
9901 2 06 803 P P9901-STATS='X'
9901 2 06 804 F DELIMIT_DTE(ZHSRAS_T588Z_9901)
9901 2 06 805 W P9901-ENDDA=RP50D-ZZDATE3
9901 2 06 806 * ****PSAVE-ENDDA<>P9901-ENDDA
9901 2 06 807 F LOCK_REC3(ZHSRAS_T588Z_0015)
9901 2 06 808 I MOD,9901,3,P9901-OBJPS,(P9901-BEGDA),(P9901-ENDDA)
9901 2 06 812 * *BEGCREATE NEW REC FOR SURVIVING WIDOWS******
9901 2 06 813 * *
9901 2 06 814 P P9901-STATS<>'X'
9901 2 06 815 F BEGIN_DATE(ZHSRAS_T588Z_9901)
9901 2 06 816 W P9901-BEGDA=RP50D-ZZDATE3
9901 2 06 817 W P9901-ENDDA='99991231'
9901 2 06 818 I COP,9901,3,P9901-OBJPS,(P9901-BEGDA),(P9901-ENDDA)
9901 2 06 819 * *ENDCREATE NEW REC FOR SURVIVING WIDOWS*****
9901 2 06 830 * ***END*****DEATH OF WIDOW*****************
Control is going to all routines, but
MOD,9901,3,P9901-OBJPS,(P9901-BEGDA),(P9901-ENDDA) and
COP,9901,3,P9901-OBJPS,(P9901-BEGDA),(P9901-ENDDA) is not working.
Message was edited by: Shahana Shahul
Message was edited by: Shahana Shahul

HR - Dynamic Actions help required

Hi,
We have a requirement like this:
Each Org unit is attached to a Work Address and the same is stored in Infotype 1028.
Whenever hiring action takes place the dynamic action should read the Infotype 1028 for the Org unit to which the employee is assigned and fetch the Work address details.
These details should be stored in Infotype 0006 under Work Address subtype.
Request your help as this is a very urgent requirement for us.
Title edited by: Alvaro Tejada Galindo on Jun 12, 2008 7:05 PM

In the dynamic actions, you can specify the name of a subroutine of a program.
Create a subroutine, and write code inside that

Dynamic Action help please

Good day
I am a new user to SAP (roughly 6 weeks), focussing on the HR side. I have been asked to attempt to compile the code for the following requirement:
Capture IT9007 (Service History) for new employees, or those who have a change in Position The fields required are Start Date; To Date; Employee Type; Status; Workplace; Grade; Position.
Please help me understand how to go about gathering the data. Explanation of the syntax too would be appreciated too.
Thanks for the help
P.s. I have put together the following code, but my colleague has just informed me it does nothing...
IType     STy.          Field Name     FC     No.     S     Variable function part
0                    6          P     SY-TCODE='PA40'
0                    6          P     PSPAR-BUKRS='5005'
0               MASSN               P     P0000-MASSN='Z1'/X
0               MASSN               P     P0000-MASSN='Z2'/X
0               MASSN               P     P0000-MASSN='ZA'/X
                    0          I     COP,P0001-PLANS
                              W     P9007-PLANS=P0001-PLANS
0               MASSN               P     P0000-MASSN='12'/X
0               MASSN               P     P0000-MASSN='Z9'/X
0               MASSN               P     P0000-MASSN='ZAZ5'
                    0          I     COP,P0000-BEGDA
                              W     P9007-BEGDA=P0000-BEGDA
                    0          I     COP,P0000-ENDDA
                              W     P9007-ENDDA=P0000ENDDA
                    0          I     COP,PSPAR-PERSG
                              W     P9007-EMPLOYEE_TYPE=PSPAR-PERSG
                                   EMPLOYEE STATUS
                    0          I     COP,P0001-WERKS
                              W     P9007-WORKPLACE=P0001-WERKS
                    0          I     COP,P0001-PERSK
                              W     P9007-GRADE=P0001-PERSK
                    0          I     COP,P0001-PLANS
                              W     P9007-PLANS=P0001-PLANS

Hi KNaidoo,
Welcome to swim the SAP ocean:).
Dynamic actions are actions that is triggered during infotype maintainance.
lets say you enter some details in infotypes and save it (PAI ) ,it has to populate an email or populated another inoftype,its intended for this purpose.
There are standard infotypes and customer infotypes(9000-9999).If you see in your case it IT9007(customer infotype)
http://www.hrexpertonline.com/downloads/Rehan%20Zaidi%20Online%20Portion.doc
tcode pa30 lets say you are opening IT0001 for one employee and when you go to view the infotype details.click system->under SAP data you will find MP000100(MPXXXX) its module pool program .when you double click on that will take you to abap editor.every module pool program of the infotype will have a standard program MPPERS00(standard include) and it wil have the routine that checks if there is a dynamic action maintained for that infotype be refering T588Z.
Rehan zaidi power of dymamic action is an execllent one for understanding .please download the doc from the link shared.
No Worries
KG

Help using a dynamic action to update tabular form items (specifically radio button) based on collection

Hi Everyone, I have posted this question in the past and made huge progress with Denes Kubicek's help: https://apex.oracle.com/pls/apex/f?p=31517:294:115851992029365::::: based on my earlier question posted: https://forums.oracle.com/forums/thread.jspa?threadID=2537494
I am struggling with one item in my tabular form. It is a radio button. The choices all appear properly, but the value is not saved in the collection (and hence, not saved in the table). All other items in the tabular form save properly.
here is what I have for the query.   It is item c024 (which maps to ;'f03'), which is defined as a radio LOV based on an existing LOV.
Currently I have:
2 page items:
P110_ID
P110_VALUE
Dynamic action called CHANGE COLUMN:
event: CHANGE
selection type: jQUERY Selector
jQuery:
jQuery Select = input[name='f03'],select[name'f08'],select[name='f09'],input[name='f10'],input[name='f11'],input[name='f12'],select[name='f40'],input[name='f21'],input[name='f22'],input[name='f23'],input[name='f50']
event scope: Dynamic
true action#1: set value P110_ID javascript expression this.triggeringElement.id
true action#2: set value P110_VALUE javascript expression this.triggeringElement.value
true action#3: execute pl/sql code
declare
v_member number;
v_seq number;
begin
v_member := TO_NUMBER (SUBSTR (:p110_id, 2, 2));
select ltrim(substr(:p110_ID,5,4),'0') into v_seq from dual;
safis_collections.update_column(v_seq,
                                v_member,
                                :p110_value);
true ation#4 refresh region :LANDINGS_COLLECTION
the tabular form is based on the query:
SELECT
apex_item.text(1,seq_id,'','','id="f01_'||seq_id,'','') "DeleteRow",
seq_id,
seq_id display_seq_id,
apex_item.text_from_LOV(c004,'SPECIES')||'-'||apex_item.text_from_LOV(c005,'GRADE')||'-'||apex_item.text_from_LOV(c006,'MARKETCODE')||'-'||apex_item.text_from_LOV_query(c007,'select unit_of_measure d, unit_of_measure r from species_qc') unit,
apex_item.select_list_from_LOV(8,c008,'DISPOSITIONS','onchange="getAllDisposition('||seq_id||')"','YES','0',' -- Select Favorite -- ','f08_'||seq_id,'') Disposition,
apex_item.select_list_from_LOV(9,c009,'GEARS','style="background-color:#FBEC5D; "onFocus="checkGearPreviousFocus('||seq_id||');"onchange="getAllGears('||seq_id||')"','YES','3333','-- Select Favorite --','f09_'||seq_id,'') Gear,
apex_item.text(10,TO_NUMBER(c010),5,null, 'onchange="setTotal('||seq_id||')"','f10_'||seq_id,'') Quantity,
apex_item.text(11,TO_NUMBER(c011),5,null,'onchange="getPriceBoundaries('||seq_id||')"','f11_'||seq_id,'') Price,
apex_item.text(12, TO_NUMBER(c012),5,null, 'onchange="changePrice
('||seq_id||')" onKeyDown="selectDollarsFocus('||seq_id||',event);"','f12_'||seq_id,'') Dollars,
decode(c013,'Y',apex_item.text(14, c014,30,null,'style="background-color:#FBEC5D;" onClick="onFocusAreaFished('||seq_id||');"','f14_'||seq_id,''),'N','N/A') Area_Fished,
decode(c017,'Y',apex_item.text(18, c018,4,null,'style="background-color:#FBEC5D; "onBlur="setUnitQuantity('||seq_id||')"','f18_'||seq_id,''),'N','N/A') UNIT_QUANTITY,
decode(c017,'Y',apex_item.text(19,'CN',3,null,'readOnly=readOnly;','f19_'||seq_id,''),'N','N/A') UNIT_COUNT,
c024 hms_flag,
decode(c050,'Y',apex_item.checkbox(21,'Y','id="f21_'||seq_id||'" style="background-color:#FBEC5D; " onClick="alterYes('||seq_id||');" onKeyPress="alterYes('||seq_id||');"',c021),'N','N/A') FinsAttached,
decode(c050,'Y',apex_item.checkbox(22,'N','id="f22_'||seq_id||'" style="background-color:#FBEC5D;" onClick="alterNo('||seq_id||');" onKeyPress="alterNo('||seq_id||');"',c022),'N','N/A') FinsNotAttached,
decode(c050,'Y',apex_item.checkbox(23,'U','id="f23_'||seq_id||'" style="background-color:#FBEC5D;" onClick="alterUnk('||seq_id||');" onKeyPress="alterUnk('||seq_id||');"',c023),'N','N/A') FinsUnknown,
decode(c050,'Y',apex_item.textarea(28,c028,3,null,null,'f28_'||seq_id,''),'N','N/A') Explanation,
decode(c024,'N',apex_item.select_list_from_LOV(29,c029,'HMSNATURE','onchange="saveNature('||seq_id||')"','YES','A','-- Select Nature of Sale --','f29_'||seq_id,''),'U',apex_item.select_list_from_LOV(29,c029,'HMSNATURE','onchange="saveNature('||seq_id||')"','YES','A','-- Select Nature of Sale --','f29_'||seq_id,''),'Y','N/A') Nature_Of_Sale,
decode(c020,'Y',
apex_item.select_list_from_LOV(40,c040,'HMS_AREA_CODE','style="background-color:#FBEC5D;"',null,null,null,'f40_'||seq_id,''),
'N','N/A') HMS_AREA_CODE,
c020,c050,
decode(c020,'Y',
apex_item.text(41,TO_NUMBER(c041),5,null,null,'f41_'||seq_id,''),
'N','N/A') Sale_Price
from apex_collections
where collection_name = 'SPECIES_COLLECTION' order by seq_id
I have noticed the following:
when I change column C011 (price) the following values are set in the dynamic action:
P110_ID = f11_1
P110_VALUE = whatever I change the price to.
when I change the column C024 (hms_flag), the following values are set:
P110_ID = f03_0001
P110_VALUE = whatever I change hms_flag to.
the region is refreshed in my dynamic action, and the change for hms_flag does not hold. I have tested the SQL query that generates the value for v_SEQ in the dynamic action.   In both a change to price and HMS_FLAG it appears valid
select ltrim(substr(:p110_ID,5,4),'0') into v_seq from dual;
if f11_1, v_seq:= 1
if f03_0001, v_seq := 1
thank you!

solved. sort of.
field c024 references f03.
the Dynamic ACtion, step 4 calculates v_member by taking a substring of P110_ID...and in all other fields, the column and the field (fxx) are the same value....except for c024.
I am not certain exactly how to resolve, but see the problem.

Need help in Dynamic Actions

Hi Experts,
I have a requirement to create Additional Payments for two wage types 591 and 691 for a particular Employee subgroup and for three personnel areas whenever a person is hired. I have written the code like this
400           *BEK047.01 RECURRING PAYM 591 / 691
401     P     PSPAR-MASSN='01'
402     P     P0001-PERSK='AA'
403     P     P0001-WERKS='037'
404               P                    P0001-Werks='039'/X
405               P                   P0001-WERKs='041'/X
406     I     INS,0014/D
407     W     P0014-LGART='0591'
408     W     P0014-BETRG='109'
409     W     P0014-ZANZL='1'
410     W     P0014-ZEINZ='012'
411     W     P0014-ZDATE=P0001-BEGDA
412     W     P0014-BEGDA=P0001-BEGDA
414     W     P0014-ENDDA=P0001-ENDDA
Apparently above code doenst work . I removed the OR condition and write the code three times for diff personnel area and that works. So i wanted to know what is wrong in above code. Also when records are created they should be defaulted with the amount mentioned in the code i.e. 109 .....but somehow some other value is coming which i havent entered.
Please help
Regards,
Navneet.

Dear Navneet
           your dynamic action shows that you want to default the valued in the Recurring Payment and Deductions but not the Additional Payments. Usually the Indicator /X is used with the condition is endup with Logical OR.
Try out the following values and test
IT            FC     Num     Indi     Variable Function Part
0001     04     101     P     T001P-MOLGA='40'
0001     04     102     P     P0000-MASSN='01'
0001     04     103     P     P0001-PERSK='AA'
0001     04     104     P     P0001-WERKS='037'
0001     04     105     P     P0001-WERKS='039'
0001     04     106     P     P0001-WERKS='041'
0001     04     107     I     INS,0014,,,(P0001-BEGDA),(P0001-ENDDA)/D
0001     04     108     W     P0014-LGART='0591'
0001     04     109     W     Q0014-BETRG='109'
0001     04     110     W     P0014-ZDATE=P0001-BEGDA
0001     04     111     W     Q0014-ZANZL='1'
0001     04     112     W     Q0014-ZEITX='Months'
If the above coding is not working, Tryout individually for every condition seperately starting from 3rd line and followed by I like followes.
0001     04     101     P     T001P-MOLGA='40'
0001     04     102     P     P0000-MASSN='01'
0001     04     103     P     P0001-PERSK='AA'
0001     04     107     I     INS,0014,,,(P0001-BEGDA),(P0001-ENDDA)/D
0001     04     108     W     P0014-LGART='0591'
0001     04     109     W     Q0014-BETRG='109'
0001     04     110     W     P0014-ZDATE=P0001-BEGDA
0001     04     111     W     Q0014-ZANZL='1'
0001     04     112     W     Q0014-ZEITX='Months'

Need Help calling Dynamic Action from Link in Interactive Report

Hello I have an Interactive Report. I would like to have a Dynamic Action called when the user selects a row (Clicks a Link).
I am running Application Express 4.0.2.00.07 on Oracle 11gR1.
Any help would be great.

Hi VANJ,
Sorry for the poorly written original post. I will be much more specific.
I have a Interactive Report on page 40. That report has a column named X_UID that is a link back to page 40 and sets a text item named P40_X_UID in a Region we will call "Form X" with the value of the column. That page refresh also then calls a Automated Row Fetch process to fetch all the values needed for the rest of the page items in the "Form X" region. Also "Form X" region has a conditional display on to only display when P40_X_UID is not null.
What I would like to do:
When the user clicks on link in the IR for X_UID instead of the "Form X" region becoming visible I would like to become modal. I am trying to use a Plug-In named "ClariFit Simple Modal - Show". I have it working with a Dynamic Action when you click a Page Item. But I would like to to work when the link is clicked and the data populated.
I hope that helps some.

Urgent help on a dynamic action

Hi,
I am working on SAP 4.6C and have an issue with a dynamic action. I started having this problem since a month. We did not customize this new dynamic action. I dont understand how it entered in my SAP R/3 system.Support packs were added last month can they be responsible.I am entering the discription of the dynamic action.
0041 04 1 * --- BEI NEUANLAGE/EINTRITT IT2006 MIT 10 VORSCHLAGEN ---
0041 04 3 I INS,2006,10,,(P0041-BEGDA),
0041 04 4 W P2006-ENDDA=P0041-BEGDA
0041 04 5 W P2006-ENDDA+4(4)='1231'.
I did compare the table T588Z with the T-Code SCMP and can see that above dynamic action is newly added but need to know how.
ASAP help would be appreciated.
Thanks and Regards
Swati.

.

HELP Filtering and IReport with Dynamic Actions

Hi all,
Now that I've upgraded to 4.0, I'm trying to make more use of Dynamic Actions. I followed the example at: http://anthonyrayner.blogspot.com/2010/07/report-filtering-with-apex-40-dynamic.html and it works fine. The thing is that it is based on a select list which kind of takes away from the effect. What I want is to have an interactive report which is filtered by the value in a text box. I want to use a dynamic action that when a user types a search string, the IR is filtered down based on each character typed. I used the "Change" Event on the text box and the Refresh action on the report region for the IR, but it only refreshes when I "Enter" (submit). Any ideas on how I can get an AJAX-like action using dynamic actions?
Thanks!!!

Hi,
See this post
APEX 3.2 Refresh interective report
It works also for Apex 4.
You can call javascript that set your item session state and refresh IR like in that post
Regards,
Jari

Help with Dynamic Action Construction

I want to create a dynamic action that will disable a field called P1_TBRN when any of the following conditions in the form are true:
:P1_TRIAL_STATUS in ('Off-Trial','Unknown') or
:P1_DIAGNOSIS_MAJOR ='UNKNOWN' or
:P1_INSTITUTION ='Unknown' or
:P1_CONSENT_EXISTS <> 'Y';
I assume I use a "Change" event but I can't work out how to enter the 4 condtions so that they are all checked each time. If I create 4 separate dynamic actions, when I change one of the fields, it does not take into consideration the other field values.
An alternative I've tried is to set up a Read Only condition on P1_TRIAL with the above condition. The only problem is that I have to submit the page each time there is a change in one of the 4 fields above. It would be better if I didn't have to submit the page each time so I'd like to use a Dynamic Action.
thanks in advance
Paul P

Hi Paul.
If you want to evaluate 4 variables in 1 dynamic action you have to post the value of these 4 items on each change of one of these items as far as I know.
I had a form with multiple checks of this kind and ended up having serieus performance issues.
My way around was to evaluate in javascript. You creat a dynamic action on change of any of these 4 fields and set the condition to a javascript expression. The expression looks something like (quick edit so there might be some typos):
$v('P1_TRIAL_STATUS')=='Off-Trial'||
$v('P1_TRIAL_STATUS')=='Unknown')||
$v('P1_DIAGNOSIS_MAJOR')=='UNKNOWN'||
$v('P1_INSTITUTION') =='Unknown'||
$v('P1_CONSENT_EXISTS') == 'Y'
If this evaluates to true the true action of the dynamic action is executed, otherwise the false action.
Cheers
Bas

Re: Dynamic Action is not triggering in LSMW Recording

Hello All,
In SAP HRMS personnel actions if i do using LSMW Recording it is not triggering the dynamic actions.
Is there any mechanism to Trigger dynamic action in LSMW Recording ?
How to find the differences in process with and with out recording ?
Small help is also highly appreciated.
With Regards,
Sunil,
+91-9903695384.

Yes. Do one thing. First study the dynamic action. Try to understand what the dynamic action is doing. Is it creating data in other infotype or is it updating some other table. Once it is clear what the dynamic action is doing then you can try to implement the same logic in LSMW. In LSMW there is a provision to add more than one recording and this recording can be called based on some logic..
Thanks & Regards,
Sandip

Refresh report title with dynamic action

Hi all,
I have a report that is refreshed with an dynamic action. When the refresh is performed, first the value of two hidden variables are set (P2_ID and P2_NAME) and are submitted (using a dynamic action type 'pl/sql', with code 'null;' and page items to submit: P2_ID,P2_NAME).
In the query of the report, i use :P2_ID in the where-clause. That's all working like a charm! The one thing that doen't work, is the title of the region: that's defined as 'Properties of &P2_NAME.', but the title isn't refreshed when the report gets refreshed.
Is there a solution for this? I hope I'm clear enough.

See Re: Dynamic action - Refresh
So you are right; the native Refresh action just refreshes the report content, it does not perform &ITEM. substitutions everywhere in the region.
What you could do is use a named SPAN as the title like &P2_NAME. and add a TRUE action to your Dynamic Action to set the title using Execute Javascript code $s('my_title',$v('P2_NAME'));Hope this helps.

Dynamic action on text box change does not working

i have a page with following components.
a report that has and edit link.
a text box to catch the primary key from report link when it is clicked
a number of elements (text boxes, check boxes and LOVs) which are used as data entry form.
Now my design is that user enter values save them and no sooner did they save, the report depicts new
values. if user want to edit any record, they click on edit link and the data entry form elements
should now bring all those values from DB on page. i m successful to pick primary key and bring
it in a hidden text box and wrote a dynamic action on its change event that will bring values from
DB and set all page elements. but but but.........the change event doesnt work. it only work
when focus is lost from the text box...!! offcourse user wont want to click in that "hiddent" text
box and then click some where else to bring values in page data entry form......
help is humbly requested from forum or if any other solution approach is to be used easier than
one i m using, would be appreciated.
thanks in advance for reading my bore question :)

bundles of thanks for reply. i m going to elaborate.
1. My page no is 3.
2. Hidden Item name is P3_EDIT_ACTIVITY_ID
3. Data entry form, hidden item and the report are on the same page.
4. on the edit link of report, i have used following settings.
    Target: Page in this application
     Page: 3
     and i set hidden item as follows......
     Item 1   P3_EDIT_ACTIVITY_ID         Value #ACTIVITY_ID#
   well, when i click the link on report it does bring Activity_Id in the hidden box (which is not yet hidden for debugging purpose)
Next i wrote Dynamic action which fires on the change event of P3_EDIT_ACTIVITY_ID and run PL/SQL code with in it which is as follows
declare
Dept varchar(50);
begin
   select my_dept into Dept from activity_main ACTIVITY_ID = :P3_EDIT_ACTIVITY_ID;
   :P3_Dept := :Dept;          (i did use :P3_Dept := Dept also but this wont work)
insert into testdynamic (stamp) values (Dept); (I did this to check whether correct value is brought from DB, yes it works correctly, correct Dept is being inserted in stamp column)
end;
i have created another true action to check when the dynamic action is fired. its very simple alert. and the problem is, it only fires when focus is lost from the P3_EDIT_ACTIVITY_ID. i mean, when u keep changing value inside the text box, nothing happens, when u go outside, the alert is fired and so the pl/sql procedure. but the line
    :P3_Dept := :Dept;       OR      :P3_Dept := Dept;         arent working which is the actual requirement.
I m not using set value here as i have to set a lot of values on page not one. further. plz let me get rid of this lost focus thing as i want the form to be populated with correct values related to P3_EDIT_ACTIVITY_ID as the user click on any edit_link in the report.
Thanks for persistence. i hope i have provided all the details.
looking forward.

Dynamic Action with KeyCode check for ENTER button pressed

Hi,
I want to create a dynamic action which executes if the ENTER button of field P1_NAME is pressed.
I thought about this type of DA:
Event: Key Press
Selection Type: Item(s)
Item(s): P1_NAME
Condition: Javascript expression
Value: this.triggeringElement.keyCode == 13
That unfortunately doesn't work! Dynamic action doesn't get executed...
Hope for help! :)
Tobias

I found the solution in my own blog: :)
Event: Key Press
Selection Type: Item(s)
Item(s): P1_NAME
Condition: Javascript expression
Value: this.browserEvent.keyCode == 13

Dynamic action with function works, doesnt refresh textfield

Hi all,
experimenting with dynamic actions so I got the following setup:
I've built a screen with 2 text boxes
P7_input
P7_output
The goal is to put some tet in P7 input and have it returned with additional text in P7_OUTPUT
CREATE OR REPLACE PROCEDURE PRC_ECHO
P_INPUT IN VARCHAR2 DEFAULT 'LEEG'
, P_OUTPUT OUT VARCHAR2
) AS
BEGIN
p_output := 'Ingevoerd: ' || p_input;
END PRC_ECHO;I've created a dynamic action on the LOSE FOCUS event of item P7_INPUT.
The true action executes PL/SQL (sequence number 10)
Begin
eigen_apps.uga_prc_echo (:p7_input, :P7_OUTPUT);
end;"Page items to submit" are set to P7_INPUT, P7_OUTPUT
(and I tried with just P7_INPUT).
The second true action (sequence number 20) does a REFRESH on ITEM P7_OUTPUT (and I tried refresh region and other things I thought would make it work.)
When I enter something in P7_INPUT and tab, click or enter away from the P7_INPUT field, nothing changes in my P7_OUTPUT textfield.
Only when I hit the refresh button in my browser P7_OUTPUT is filled with 'Ingevoerd: <P7_INPUT value>.
So. The procedure does return the value into P7_OUTPUT, but I cant get an instant refresh of the P7_OUTPUT to work.
Can any of you help me?
Robin

Getting some other errors now, will look into this tomorrow.
1 error has occurred
ORA-06550: line 4, column 18: PLS-00382: expression is of wrong type ORA-06550: line 4, column 7: PL/SQL: Statement ignoredNeed to check my procedure...
Robin

Dynamic Actions...Help

Similar Messages

Maybe you are looking for