Dynamic Actions not firing when using date picker?
The dynamic actions don't seem to be triggering when selecting a date from the date picker, but trigger just fine when the dates are manually entered. Anyone else have this problem and if so is there a workaround to get it to work from the date picker as well? I am using Application Express 4.0.1.00.03
And how can I report this problem?
I'm already using Change.
If it matters, I have it set to:
Event: Select
Selection Type: Item
Condition: No Condition
My action type is just an alert right now since all I want to do is to see if I can trigger it (as in you have to walk before you can run).
Event Scope: Live
Conditon type: Dynamic Action not Conditional
Authorization Scheme: No Authorization Required
Similar Messages
-
Custom dynamic action not firing
Using Apex 4.2.2 on 11g
I have a standard report A1
There is a column link on report A1 which refreshes chart C1 using a custom dynamic action.
The column link on report A1 has the URL set to javascript:$.event.trigger('RefreshTrend_2', [{key_2:'#COL01#' }]);
and there is a dynamic action D1 RefreshTrend_2 which sets the value of the chart filter P17_KEY_2 to the value of the javascript variable key_2 and then refreshes chart C1
The dynamic action is custom with a type DOMObject of document and no condition
This works fine but when I add another report/chart (report A2, chart C2) combination with a similar dynamic action (D2), D2 is a copy of D1 with the values for the variables and chart region changed.
The A2/C2 functionality works fine on its own, D2 gets fired when I click the column link, but not when there are 2 dynamic actions of custom/document on the page.
This column link on A2 only fires the dynamic action D2 if dynamic action D2 has a higher sequence than D1 (if i move it above D1 in the list it will fire, but then D1 does not fire for the column link on A1
Am I missing something?
Thanks
KathrynHere is my page source from the browser (i put in some blank lines here to separate the 3 dynamic actions)
<script type="text/javascript">
apex.da.initDaEventList = function(){
apex.da.gEventList = [
{"triggeringElement":"P17_IS_OK","triggeringElementType":"ITEM","triggeringConditionType":"NOT_NULL","bindType":"bind","bindEventType":"change",actionList:[{"eventResult":true,"executeOnPageInit":true,"stopExecutionOnError":true,"affectedElementsType":"BUTTON",javascriptFunction:apex.da.enable,"action":"NATIVE_ENABLE"},{"eventResult":false,"executeOnPageInit":true,"stopExecutionOnError":true,"affectedElementsType":"BUTTON",javascriptFunction:apex.da.disable,"action":"NATIVE_DISABLE"}]},
{"triggeringElement":"document","triggeringElementType":"DOM_OBJECT","bindType":"live","bindDelegateTo":document,"bindEventType":"RefreshTrend_2",actionList:[{"eventResult":true,"executeOnPageInit":true,"stopExecutionOnError":true,"waitForResult":true,"affectedElementsType":"ITEM","affectedElements":"P17_KEY_2",javascriptFunction:apex.da.setValue,"ajaxIdentifier":"3BB4667C9E25BFB8DCF63639507A062A88F713A193C0D30DDF1CEA8D6875A7F9","attribute01":"JAVASCRIPT_EXPRESSION","attribute05":"this.data.key_2","attribute09":"N","action":"NATIVE_SET_VALUE"},{"eventResult":true,"executeOnPageInit":true,"stopExecutionOnError":true,"affectedElementsType":"REGION","affectedRegionId":"R2959102626294614",javascriptFunction:apex.da.refresh,"action":"NATIVE_REFRESH"}]},
{"triggeringElement":"document","triggeringElementType":"DOM_OBJECT","bindType":"live","bindDelegateTo":document,"bindEventType":"RefreshTrend_1",actionList:[{"eventResult":true,"executeOnPageInit":true,"stopExecutionOnError":true,"waitForResult":true,"affectedElementsType":"ITEM","affectedElements":"P17_KEY_1",javascriptFunction:apex.da.setValue,"ajaxIdentifier":"51D6B9673F7096076392A95D9D00B417D49DEB96D878B419FC6D1E482D0AB2F0","attribute01":"JAVASCRIPT_EXPRESSION","attribute05":"this.data.key_1","attribute09":"N","action":"NATIVE_SET_VALUE"},{"eventResult":true,"executeOnPageInit":false,"stopExecutionOnError":true,"affectedElementsType":"REGION","affectedRegionId":"R2925517394066336",javascriptFunction:apex.da.refresh,"action":"NATIVE_REFRESH"}]}];
</script>
Only the first "document" dynamic action will fire, even though I fire them by name using
javascript:$.event.trigger('RefreshTrend_1', [{key_1:'#COL01#' }]); from the column link.
Kathryn -
"Server Busy" error in Crystal Reports XI when using date picker
Hi,
I have come across an issue whereby I get a error pop up when using the date picker to select a date parameter as I run a report from within Crystal Report XI on a particular PC. While I am able to type in the date using the yyyy-mm-dd format, selecting the date picker displays an error message titled "Server Error" stating that the program is not responding and giving options "Switch To" and "Retry". Selecting either button displays the same error message and need to kill the application from the Task Manager to restart.
I have run the same report from other PCs (including using the date picker to pick a date parameter) without the error popping up. All of the PCs have the same version of the application.
Has anyone come across this and how were you able to resolve it?yes test is a formula that i used to calculate a difference
that should work, but i would put () around the
(if(remainder(({ztrptActVol.CPT}*{tlkpBblMileage.CPT}),1)>0 and
remainder(({ztrptActVol.CPT}*{tlkpBblMileage.CPT}),1)<1) then
truncate(({ztrptActVol.CPT}*{tlkpBblMileage.CPT}))+1
else ({ztrptActVol.CPT}*{tlkpBblMileage.CPT})
rounding in crystal is a pain in the && -
HTML tags not displayed when using Data Template
Hi All...
I'm developing a BI Publisher report in which one of the columns is a clob data type. I'm using an xsl stylesheet to format the data present in the clob column.
I've developed the report using data template as the data set. The problem is the clob column which has the HTML tags where not displayed properly...for example
the tag starting with
<
is replaced with
& lt;
I did a couple of searches in this forum and in tim's blog but couldn't find a proper solution...
http://blogs.oracle.com/xmlpublisher/2007/01/formatting_html_with_templates.html
API and HTML Formated Content
Re: Problem with text data elements containing escaped HTML codes
HTML Output from CDATA
Re: HTML formatted output
Re: Special characters in CLOB are making report fail
Re: Formatting of HTML tag problem
I'm using BI Publisher standalone:Release 10.1.3.2. In one of the threads..
Re: Special characters in CLOB are making report fail
I came to know that data template cannot generate proper HTML tags for release 10.1.3.2. Is there any work around way to get the proper HTML tags when data template is used as a data set?
Thanks in Advance...
Edited by: user10280715 on Dec 9, 2008 3:13 PMIssue could be with the data that is selected in the other environment. It generally happens that the ALV will not give the same results as in the DEV in the other systems.
Possible errors could be the control break statements in the loop...endloop block. validate the correctness of the control break stmts if any. -
Item Cost Is not Updated when using Data Object OinventoryGenEntry in DTW
Hello Everyone,
I'm using data transfer workbench (OInventoryGenEntry) to send the production to sap-bo. All The info that I entered in the layouts Documents.csv and Document_Lines.csv are correctly loaded, except the info related to the field "price". Do you know what changes should I apply to the layouts in order to make the DTW transfer the Item Price?
(version: SAP Business One 2005A SP:01 PL:27)
Thanks a lot
Salomon Ponce
Viniteck SA de CV
Guadalajara, Jal. MEXThank You Vincent. It works for finish goods that currently have cost in the sap-bo (taking std or avg) . Do you what should I do when the item is receiving the first-transation and it is an inventory entry coming from DTW ? Because when I test this conditions, the field "price" is ignored and when I check the inventory entry sent using dtw the recorded cost is "cero".
Thank a lot
Salomon Ponce -
Dynamic Action not being triggered in Batch
Hi Gurus,
We have the below Dynamic Action that is not getting triggered when we run a Batch to Create IT2010. We are using TCode PTE1 to create the batch.
2010 4 5 P T001P-MOLGA='10'
2010 4 10 P PSPAR-TCLAS='A'
2010 4 12 P P2010-LGART='4023'
2010 4 15 I INS,2001,,,(P2010-BEGDA),(P2010-ENDDA)/D
2010 4 20 **P2001-AWART='0100'
2010 4 21 W P2001-AWART='1300'
2010 4 25 W P2001-STDAZ=P2010-ANZHL
I have read a few posts on how this can be done, but not very clear as to whether it can even be achieved.
This Dynamic Action works fine when we manually Create an IT2010 record via PA30, it creates the IT2001 in the background.
Cheers,
AnilHello Anil,
Please check the following note, I think note should be helpful in this case.
386027 Dynamic actions
1564499 Processing initial values which are not valid in
Best Regards,
Deepak. -
Error when using data postion delay
I obtained this error when using data position delay. Can anyone please
tell me the reason why I can not configure the delay to be between 0.7
and 0.8.
Possible reason(s):
Driver Status: (Hex 0xBFFA403F) Unable to configure requested delay property given the current clock rate.
Ensure that the delay value specified is within the valid range for the
frequency specified or do not configure property for delay operation.
Device: PXI1Slot2
Property: Data Position
Sample Rate: 40000000.0
Requested Value: 0.71875
Supported Values: 0.000 through 0.200, 0.300 through 0.700, 0.800 through 1.000,
Status Code: -219401Timothy,
The 656x devices have a limit on the available data delay values based
on frequency. Between 25MHz and 50MHz there are "holes" in the
available delay range. Above 50MHz, the full 0 to 1 data delay is
valid. If you look in the specifications installed with NI HSDIO
for the NI 656x, on page 7, Figure 1, there is an illustration showing
how to compute what the valid range is for the frequency of interest.
For example, at 40MHz, valid values are:
0 to 0.2
0.3 to 0.7
0.8 to 1
In the error message posted below, you tried to input a value of 0.71875 which is not within these ranges. -
Device gets turned off when using data on mobile
device gets turned off when using data on mobile... and not responding,i.e., if we hold the power button also there was no response,not getting on... when I connect it to charger,after 10min it gets automatically turning on.otherwise no chance to use the device..sometimes it gets off at 25%, sometimes at even 72% battery...seems it might be a severe problem..please suggest a solution..
This might help:
http://helpblog.blackberry.com/2013/02/restart-blackberry-z10/ -
The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?
If you want to get a little more "exotic" you can try remapping the function keys. I did a little google searching and the hits that looked promising are,
Mapping volume and eject keys to 3rd-party keyboard Other Hardware
Spark
Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
You can also export and import your Hot Keys library, or save it in HTML format to print it.
Spark is free, so use it without moderation! -
How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic?
Is this possible?You can set any song to Skip when shuffling.
In your iTunes Library, highlight the song and right-click/Get Info. On the Options tab is the Skip when shuffling box. Select that and then Sync the iPod with your Library. -
Images on Facebook do not appear when using different web browsers
Images on Facebook do not appear when using Safari on my Macbook Pro (I've tried Google Chrome too with the same result). This makes me think it's a setting within OS Mavericks that I'm missing. I have not seen this issue on any other computers. This only occurs on my, and others' profile pictures on my profile page and on the news feed, not photos that are posted in albums or on walls. and yes, i have images enabled in Safari.
In safari the images don't appear, and in their place is a small blue "?" square >>.
In Chrome it appears as a broken image link >>
Has anyone encountered this? Is there a fix? It is very annoying.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?
Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best. -
Module borders not displaying when using Aggregator
I am using Captivate 4. I created a TOC for both modules in a project. Then I created an Aggregator to connect them and display both TOCs.
The issue I am havving is that the individual modules have borders on all 4 sides, yet they do not display when using the aggregator. How do I correct this?
Thank you.Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince -
U/tube videos open when using Safari but will not open when using Firefox.
u/tube videos open fine when using Safari but will not open when using Firefox. With Firefox I get the unhighlighted Quicktime symbol with a question mark in the center. WHY?? Any help appreciated --- Toroya
Hmmmm, strange you view YouTube in Safari & not FF. Which version of FF are you using?
Try the following:
Repair permissions & restart.
Make sure you have the latest versions of Adobe Flash Player Software
QuickTime Preferences > Advanced > MIME Stettings > Miscellaneous.
Deactivate the "Flash Media" option. -
look for a progarm that will let me have 2 moniters but one will lock on and will not change when using spaces
ok so i have one moniter to the right of me and i want to keep my google chrome on that one but still be abel to use space on the many monter. cuz when you go to spaces it movies both moniter i hope that help and i hope that you can help me.
Maybe you are looking for
-
How do you turn off a wireless keyboard?
After the G5 iMac died, I bought a refurbished Intel 21.5" iMac from Apple. The wireless keyboard that comes with is fine but I prefer my wired USB keyboard with numeric keypad, etc. So I want to put the wireless one away. Every time I push the power
-
How do I find all possible positions?
If I have 3 positions and 3 numbers I know there are 6 possible soultions (of having a diff number in each) If I have 4 positions and 4 numbers I know there are 12 possible soultions (of having a diff number in each) I know the function to find the n
-
Hello, I want to create a wifi security system for a truck with cameras, but all the ones I found are IP. So I don't know if it's possible to use it only on wifi (not on 3G/LTE). If you have an idea, it will be nice... Thank you
-
Final Cut Pro X Exported Video Size
I've recently bought Final Cut Pro X and use it for editing videos before uploading to YouTube. I used to export my videos from iMovie as a .mov file to my hard drive to then manually upload to YouTube. There doesn't seem to be this option in Final
-
How to generate profile like report in APEX
Hi, I am trying to create a report similar to Image: !http://www.nomagic.ie/sample_report.jpg! . I thought this will be easy if I create a form and fetch rows for reach section seperately during page rendering. Each each is coming from different tabl