Dynamic addition of values in Popup

Hi ,
I have a requirement to display a pop-up with check boxes and labels for the check box.
Pop-up has to contain 'n' rows , each row having a check box (with a label).
I dont know how to dynamically add rows in the pop-up ?
(I just meant rows to give a more clear picture , not that the pop-up would contain tables)
When i add dynamically check boxes to the pop-up, i have to add events too.. for their functionality.
Could anyone please help me ?
Thanks !
Karthik.

Hi Karthik,
You ned to create the UI elements dynamically as per the requirement.
First you need to count howmany rows are for display. With help of the For loop, you can put the condition as howmany rows and in the for loop code, write the code for displaying the checkbox and label whatever you want to create. Follow the below link for dynamic UI creation
http://help.sap.com/erp2005_ehp_03/helpdata/EN/4f/07cf3dd28b5610e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6fdae690-0201-0010-a580-d104b459cb44
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/74cda090-0201-0010-6b91-f85b2489f765
Dynamic Creation of Checkboxes!
http://help.sap.com/saphelp_nw04/helpdata/en/24/4e70c63574ec4284d0f47324ab2d0e/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/74cda090-0201-0010-6b91-f85b2489f765
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6fdae690-0201-0010-a580-d104b459cb44
Dynamic UI element creation
Thanks
Suresh
Edited by: Suresh Mandalapu on Aug 24, 2008 8:33 AM

Similar Messages

Join query in a dynamic list of values query

I have a join query in a dynamic list of values query. The value does not return a text value, but rather the id value.
Is it possible to use a join query in a dynamic list of values query?
For example...in the below query, I expect to see ename in the drop down list, but I see class_emp_id.
select b.ename d, a.class_emp_id r
from class_emp a, emp b
where a.class_cat_id = :CURR_CLASS_CAT_ID
and a.emp_id = b.emp_id
order by 1
Thanks,
Reid

:CURR_CLASS_CAT_ID is a number datatype.
I think the problem is with the ARF. Whenever I change the dynamic LOV query to exclude the :CURR_CLASS_CAT_ID (a passed in session variable), the drop down shows all the text names I am looking for; albeit, too many since I am excluding the :CURR_CLASS_CAT_ID.
The page I am having the problem with is a popup that is called from a report link on another page. When I show the session variables on the popup page, it shows values for only 1 of the 3 session variables I am passing to this page.
I am using the javascript:popUp2 syntax when I call the popup page from the report link.
As I said previously, I am passing 3 parms and only the 1st parm is getting a value. Yes, there are values for all three parms in the record of the report.
Is there a limit to the number of variables (itemNames) that can be passed to the popup using this method?

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

How can we use C# to read dynamic parameter's value list from .rpt?

I'm using Cystal Report 2008. We know starting from CR XI we can create dynamic parameters, the list of items of this kind of parameter are fetching from database. So in general the SQLs to get the list of values for dynamic parameters are stored in the .rpt.
In Crystal Report Designer, if I preview a report with dynamic parameters, it will first query the database and then show the input dialog with list of values from database for user to choose. My question is can we implement the same thing by our C# code? I'm planning to use C# code to read this dynamic parameter's value list from .rpt and render them on the web page. Then pass back the user selected values to the .rpt to run the report after user make the choice. I didn't find any APIs can do this. Is it possible?
Thanks in advance!!

Hi,
Can you explain a bit in detail, I have similar scenario. I am using the following code but not getting the Column name for dynamic parameter list.
foreach (ParameterFieldDefinition prm
                          in reportDocument.DataDefinition.ParameterFields)
                try
                    string vParameterFieldName;
                    *vParameterFieldName = prm.ParameterFieldName.ToString();*
Shakeel

Error while selecting NULL value from Popup Key LOV(numeric or value error)

Hi,
I have a item P1_DEPTNO with following properties.
P1_DEPTNO - Popup Key LOV (Displays description, returns key value)
LOV - P1_DEPT_LOV
select deptname d, deptno r from deptP1_DEPTNO item properties
List of Values
Named LOV - P1_DEPT_LOV
Display Null - Yes // changed to Yes, so that it can accept NULL values.
Null display value - NULL
Null return value -   (blank)PL\SQL Process -
declare
v1 number;
begin
if :P1_DEPTNO is null OR :P1_DEPTNO = '' then
    v1 := 0;
else
    v1 := :P1_DEPTNO;
end if;
// rest of the PL\SQL process
end;Now, when I run the page and select NULL value from Popup LOV and submit, I get the following error.
ORA-06502: PL/SQL: numeric or value error: character to number conversion error.When, I select any other value other than NULL, then it's working perfectly fine.
Only in case of NULL value, I am getting this error.
ANY idea, why this error is coming??
Thanks,
Deepak

Hi Varad,
I did the following change
Null display value - (blank) // by default it is displaying '%' in the select this
Null return value - -1
but when I select % (null value) from the popup list, it displays the return value -1 in the text field.
My question is why it is displaying the return value -1 in the text field...*It should display the display value in the text field (i.e blank in this case)*
then, I did the following change
Null display value - (blank) // by default it is displaying '%' in the select this
Null return value - // a single space, so that when I select %(null value) from the list, it should display blank in the text field...
then I did the following change in the PL\SQL process.
PL\SQL process
declare
v1 number;
begin
if :P1_DEPTNO = ' ' then // -- checking the value of single space ' ' when we select %(null) in the popup list, BUT even I select %(null), control is not coming here.
    v1 := 0;
else
    v1 := :P1_DEPTNO;
end if;
// rest of the PL\SQL process
end;Thanks,
Deepak

Dynamic list of values in CR 2008 - request of login to database

I am using CR2008 with VB2005. I created simple application which generate report on different SQL Server 2005 databases.
Report uses OLE.DB connection to SQL Server, I pass logon information in VB using "SA" username and password. The same simple report works great on different databases with one exception: if parameter (dynamic list of values) is used in report it runs correctly only on database it was created (connection to this database is saved in report and can be seen in Database->Set Datasource Location). Changing connection to other databases in VB during runtime causes CR to ask for username and password (in standard parameter window). It looks, like Crystal have one connection for report and the other for dynamic list of values parameter. I pass connection information to report using ConnectionInfo(). I loop through alll tables in report and apply connection:
For Each crTable In crTables
                crTableLogOnInfo = crTable.LogOnInfo
                crTableLogOnInfo.ConnectionInfo = crConnectionInfo
                crTable.ApplyLogOnInfo(crTableLogOnInfo)
Next
I tried to pass connection information also to parameter but I couldn't find such possibility.

This is a known issue (Tracking number is ADAPT01333806.) and a note has been written, unfortunately it is not yet published. Below is the note content, including a work-around / resolution. You may also want to try FP 2.3, see that helps. (I'll break this post into two as I'll loose the formatting if I don't.
Reproducing the Issue
Use Crystal Reports 2008 SP2 to create a report with dynamic parameter(s)
Use the following code from the Crystal Reports SDK for VS .NET
Dim crDatabase As Database
Dim crTables As TablesDim crTable As Table
Dim crTableLogOnInfo As TableLogOnInfo
Dim crConnectionInfo As ConnectionInfo
crReportDocument.Load("<path>")
crReportDocument.Refresh()
crConnectionInfo = New ConnectionInfo()
With crConnectionInfo
     .ServerName = "<New Server Name>"
      .Password = "<password>"
End With
crDatabase = crReportDocument,Database
crTables = crDatabase.Tables
For Each crTable In crTables
     crTableLogOnInfo = crTable.LogOnInfo
     crTableLogOnInfo.ConnectionInfo = crConnectionInfo
     crTable.ApplyLogOnInfo(crTableLogOnInfo)
Next
CrystalReportViewer1.ReportSource = crReportDocument
The above code works with Crystal Reports 2008 SP 1

Crystal Reports 2008 SP3 Additional parameter values are needed

I recently upgraded to Crystal Reports 2008 SP3, and now when I try an export a report from the Crystal Reports Designer, I get the error "Additional parameter values are needed before this report can be saved or viewed with data. Click 'Ok' to enter the missing values or 'Cancel' to proceed without data". I am trying to export the report to Crystal Reports format. The report is getting data from a MS SQL 2005 stored proc. I tried building a new simple report (just took all the fields in the result set and put them in the details section) using the same stored proc, and get the same error when I try to export.
FYI, before I try to export I always preview the data in the report, so the parameters are defiantly set correctly.
This was working correctly in Crystal Reports 2008 SP2.

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

How to generate controls dynamically based on value stored in database using mvc4?

In my database, i have a field called control_ids corresponding to text box, dropdownlist, radiobuttonlist etc. My goal is to
create controls dynamically based on value of control_id-field in table. Anybody please help me how to create the controls dynamically in MVC 4 for this scenario.

In your view you could do something like that:
foreach (var field in Model.FormStruture.fields)
<div class="editor-label">
<label for="@field.Name">@field.Descricao</label>
</div>
<div class="editor-field">
<input class="text-box single-line" id="@field.Name" name="@field.Name" type="text" value="@field.Valor" data-rules-required="@field.Mandatory.ToString().ToLower()" data-rule-number="@field.Tipo.Equals(SiB.OCR.Documentos.Modelo.TipofieldDocumento.Numerico).ToString().ToLower()" title="@field.Descricao" />
</div>
if (!String.IsNullOrEmpty(field.Format))
@:<script type="text/javascript">$("[email protected]").mask("@field.Format");</script>

Howto pass dynamic jsp:param value to applet

Hi.
I have a JSP page with 3 to 4 links... and an applet with jsp:plugin .
So i want to pass the URL behind the link to the applet as a Request Param..
My JSP code looks like
<a link href="www.google.com">Google</a>
<a link href="www.oracle.com">Oracle</a>
<a link href="www.gmail.com">Gmail</a>
<jsp:plugin type="applet"
                            code="MyApplet"
                            height="0" codebase="../../jars/" width="0"
                            name="MyApplet"
                            align="bottom">
                        <jsp:params>
                                <jsp:param name="applicationURL"
                                           value="this should be the "/>
                        </jsp:params>
                        <jsp:fallback>
                                <p>This feature should run on applet supported
                                   browser.</p>
                        </jsp:fallback>
                </jsp:plugin>and my applet code looks like
init()
          String appURL = getParameter("applicationURL");
                System.out.println(appURL);
          }I have a similar thread in Java forums... Howto pass dynamic jsp:param value to applet
Thanks,
Murali.

My JSP code looks like
<jsp:plugin type="applet"
                            code="MyApplet"
                            height="0" codebase="../../jars/" width="0"
                            name="MyApplet"
                            align="bottom">
                        <jsp:params>
                                <jsp:param name="applicationURL"
                                           value="applicationURL"/>
                        </jsp:params>
                        <jsp:fallback>
                                <p>This feature should run on applet supported
                                   browser.</p>
                        </jsp:fallback>
                </jsp:plugin>and my applet code looks like
init()
          String appURL = getParameter("applicationURL");
                System.out.println(appURL);
          }Now i want to have links on JSP pages clicking on which corresponsing url will be displayed in applet.
Edited by: 635237 on Jan 24, 2011 10:44 AM
Edited by: 635237 on Jan 24, 2011 10:45 AM

Additional Acquisition Value

Hi Gurus,
We have an asset which was acquired last 2005. Useful life is one year and start of depreciation was February 2005.
The asset was fully depreciated on March 2006. However, on December 2006, additional acquisition value was posted using transaction type 346. The problem is that the additional value was not depreciated until now.
Kindly advise on how this can be corrected given that the asset was acquired 6 years ago.
Thanks.

Hi Shayam,
Thanks for your advise. But I think we cannot reverse the document since the additional acquisition was posted on our legacy system which is SAP 4.6B. We have upgraded to SAP ECC6 last 2007 and have only migrated the asset balances. Kindly advise on how we can reverse the additional acquisition given that the document is in the old SAP. Is there any other way to post the reversal?
Regards.

Can I create a multi-selection list using a dynamic list of values?

I'm reading section 19.7.3 from the dev guide - it explains how to create a selectOneListbox using a dynamic list of values. Is it possible to create a multi-select listbox from a dynamic list of values?
What I would like to do - I have a read-only view object with a hard-coded query - I would like to display the results of the query in a dropdown list box, or dropdown list box with boolean checkboxes, to allow the user to select multiple items from the list. How can I accomplish this?
thanks

Hi JavaX,
I don't know of any JSF components (at least not any ADF Faces components) that lets you do multiple selection in a drop-down. There is an af:selectManyListbox, but it does not render as a drop-down.
John

Dynamic cell associated value as query string parameter in custom hyperlink property of KPI of scorecard in PPS SP2013

Can we pass dynamic cell associated value [of scorecard] as query string parameter in custom hyperlink property of KPI of scorecard in PPS SP2013 , so that we can pass those values to another page
How to get those cell associated values and set these dynamic value as query string parameter in custom hyperlink property of KPI of scorecard in performance point services in sharepoint 2013

I could somehow link to the table name, but that can be changed... Any ideas?
Not sure if this will help or not but maybe a little from several areas might point you in the right direction.
If you are concerned about users changing the table name then you can define a name to reference the table and then if the user changes the table name then the Refers to automatically changes to the new table reference but your defined name remains the same.
However, if users want to break a system even when you think you have it bullet proof the users come along with armour piercing bullets.
Example:
Insert a table (say Table1)
Go to Define a name and insert a name of choice (eg. ForMyTab1)
Then click the icon at the right of the Refers to field and select the entire table including the column headers and it will automatically insert something like the following in the Refers to field.
=Table1[#All]
Now if a user changes the table name then Table1 will also automatically change.
Example code to to reference the table in VBA.
Sub Test()
    Dim wsSht1 As Worksheet
    Dim lstObj1 As ListObject
    Set wsSht1 = Worksheets("Sheet1")
    Set lstObj1 = wsSht1.ListObjects(Range("ForMyTab1").ListObject.Name)
    MsgBox lstObj1.Name
End Sub
Regards, OssieMac

Dynamically setting the values for the Adapter Configuration in BPEL

We are configuring the JMS adapter to put into an MQ topic. For this we are giving all the values for the configuration parameters like
Factory Properties.
JMS connection Factory
Transacted
Destination Type
Username
Password
Destination Name, etc...
and we are able to produce message on the MQ.
Our requirement is to dynamically pass the values for the above parameters from some configuraion files(other than oc4j-ra.xml), which will have value for each obove parameters.
Any help on this is highly appreciated.
Regards,
Suman

Re: JMS Properties setup
this thread will explain how to do it.

Dynamically setting the values for the Adapter Configuration

We are configuring the JMS adapter to put into an MQ topic. For this we are giving all the values for the configuration parameters like
Factory Properties.
JMS connection Factory
Transacted
Destination Type
Username
Password
Destination Name, etc...
and we are able to produce message on the MQ.
Our requirement to dynamically pass the values for the above parameters from some configuraion files(other that oc4j-ra.xml), which will have value for each obove parameters
Any help on this is highly appreciated.

Re: JMS Properties setup
this thread will explain how to do it.

Dynamic Min Max values of Axis

Hi Everybody,
Just wanna know if there is any possibility to assign dynamically min-max values of Y axis in line chart of Crystal Reports 2008 using formulas or parametesr or any other idea??
Your suggestions are welcomed.
Thanks
Regards,
Atul

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Dynamic addition of values in Popup

Similar Messages

Maybe you are looking for