Dynamic Animation Assignment

I don't know if this is something Edge does, or if I just missed it outlined in the docs somewhere. In a project based on something like Marionette (or Backbone) AKA, I have a view/templating system. Is it possible for me to take an animation produced in Edge and assign the elements I would like it to appy to?
Using Marionette as an example. Assume I have a CollectionView. I start adding models into the underlying Collection which will cause my ItemViews to be added and rendered to the browser. After an ItemView is rendered and shown, I would like to trigger a 'transition in' animation on elements within that view.
To put it in Edge terms. If I setup a few symbols and animate them, lets say: Title and Short Description. I would love to be able to reach in and say, "Hey, take all the timelines applied to this symbol and apply it to this element that I have chosen that represents my Title and take all of the timelines for this other symbol and apply them to my Short Description. All Applied? Now Play."
After digging through the source, I'm guessing this is not readily achievable, but I thought I would ask to double check in case I was missing something.

Ok.. I got something cooking.. Can anyone enumerate what these args actually stand for:
Edge.P = function (_p, _st, _tt, _vt, _u)
_p: Property
_st: Looks like Start Value?
_tt: the type of of change we are going to apply? for example on a translate, this value will be "transform" but on opacity it will be null.
_vt: valueTemplate
_u: units? Looks like it can be "px"

Similar Messages

Dynamic value assignment to a particular column in a vertical ALV

Hi Friends,
In the present program ALV has 44 fields and output row is only one(with some field editable).
My requirement is to change present output to vertical ALV and editable field should be available
as editable.
Now I have changed this to transposed ALV manually(not dynamically) with required fields editable.
Now there is 44 rows and two column "FIELD and "VALUE'.Some values in the second column is editable.
Previously output was like this:
field1   field2 field3 ...
val1     val2    val3   ...
Now output is like:
FIELD   VALUE
field1 value1(type INT)
field2 value2(type char5) Editable(need F4 help)
field3 value3(type date)
My present structure declaration is:
types: begin of ty_itab,
        field type char 50,
        value type char70,
        celltab type lvc_t_styl,(for editing some values in VALUE column).
       end of ty_itab.
data: itab type standard table of ty_itab.
Now the second column i have declared as CHAR70 which contains only char
values because to put all differt types of values to one single column named
'VALUE'.
But as field1 field2 field3... had differnt type of value like integer char date...I need to validate some values
(specially those which are editable) before saving to custom DB table.
So I need dynamic value assignment to VALUE column when preparing internal table for display.
What I want to say is that VALUE column should be able to contain different type of values like INT, DATE, CHAR...etc
Is the requirement is feasible?
If yes then How should I declare the structure and populate different type of values within single column 'VALUE'.
Also is it possible to have F4 helps in the second column (VALUE)???

Hi Manab,
I did something comparable: We have a very complex transaction with several subscreens with multiple fields to be filled with complex logic to create a very special contract. The requirement was to create a method to create a copy of this contract being able to apply some changes.
I created a wizard (transaction SBPT_WIZARD_BUILDER - Wizard-Builder) to accomplish that. I grouped all the fields to just 3 logical groups and thius created 3 stesp where the user gets an ALV as you describe, but we have the rows like FIELD with the new value editable. Additionally I have hidden fields with table name and field name so that I can determine the characteristics (datatype) at run time.
The value fields are just strings (every ALV field is a text field on the surface).
For editable fields, you have an event DATA_CHANGED. I used this method as a handler for the event:
(I will leave out the wizard part here - maybe a good idea for a blog to explain that)
METHOD handle_data_changed.
    CALL FUNCTION 'RS_CONV_EX_2_IN'
      EXPORTING
         input_external                     = <mod>-value
         table_field                        = ls_tabfield
I also created handlers for F1 and F4
Handler for CL_GUI_ALV_GRID->ONF1
METHOD handle_f1.
    CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
      EXPORTING
        called_for_tab   = lv_tabname
        called_for_field = lv_fieldname
      EXCEPTIONS
        object_not_found = 1
        sapscript_error = 2
        OTHERS           = 3.
Handler for CL_GUI_ALV_GRID->HANDLE_F4
METHOD handle_f4.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname    = lv_tabname
      fieldname = lv_fieldname
    TABLES
      return_tab = lt_return_tab
    EXCEPTIONS
      OTHERS     = 5.
    er_event_data->m_event_handled = abap_true.
* if er_event_data->m_event_handled is not set to abap_true, system will handle it.
* In this context the message 'Keine Eingabehilfe verfügbar' will be displayed
ENDMETHOD.
This is just an excerpt from my project. It shows that you can do more in ALV as you knew.
I tried to post a little more but the formatting break down, possibly a result of the character limit
Regards,
Clemens

Dynamic Channel Assignment Question

I have a WLC 4400, and I have discovered that some areas, the access points are on the same channel. For example the floor have four access points, and the access points are working in this channels:
AP01=channel 01
AP02=channel 11
AP03=channel 11
AP04=channel 11
If Dynamic Channel Assignment is enable in the controller, Why the access points are on the same channel?
The access points are near each other.
WLC4400 System version 6.0
Any suggestion?
Is better manual configuration?

Hi Nicolas I have this situation:
AP Name.......................................... AP22
MAC Address...................................... 00:1d:a1:zz:yy:xx
Radio Type..................................... RADIO_TYPE_80211b/g
Radar Information
      Recommended Best Channel..................... 1
Nearby APs
    AP AP53 slot 0.................. -67 dBm on   1 ()
    AP AP12 slot 0.................. -57 dBm on   6 ()
The AP22 is working in the channel 1. ButI have another AP, in the same channel 1, this is normal operation?
When a Nerby AP is considered away? when the dbm is -70, -71, -72 or -75, -74, -73 ??
Thanks

Dynamic VLAN Assignment + NPS

Hello,
I'm planning a deployment with the following:
5508 WLC running 7.0.222.0
NCS 1.0.2.29
50+ 3502i AP's
Windows 2008 R2 running NPS
EAP-TLS for authentication
The end goal is to have a single SSID and utilize NPS to dynamically assign VLAN's depending on role/group.
I've read several documents that use ACS to complete the dynamic VLAN assignment (inclduing http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml), however in this case ACS is not available.
My question basically is; do I need ACS to apply the VSA for Cisco Airespace, or can this be done solely with the following IETF attributes using Microsoft NPS and AAA override on the WLC?
[64] Tunnel-Type
[65] Tunnel-Medium-Type
[81] Tunnel-Pvt-Group-ID
Any advice would be greatly appreicated!
Thanks

Thanks Steve for your quick response.
I did everything as per your recommendation and it still doesnt work.
Do you mind providing me a remote assistance, do you have Skype?
Or your prefer that I provide you a set of logs, tell me which one and I will do so.
SSID:TT
@IP WLC: 172.20.252.70
NPS: 172.20.1.16
config rule NPS: service-Type: NAS Prompt
                         Tunnel-Type: VLAN
                         Tunnel-pvt-group-ID:10
                         Tunnel-Meduim-Type:802
log WLC:
*radiusTransportThread: Sep 19 12:32:47.841: ****Enter processIncomingMessages: response code=2
*radiusTransportThread: Sep 19 12:32:47.841: ****Enter processRadiusResponse: response code=2
*radiusTransportThread: Sep 19 12:32:47.841: 8c:70:5a:1c:8e:20 Access-Accept received from RADIUS server 172.20.1.16 for mobile 8c:70:5a:1c:8e:20 receiveId = 4
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.841: 8c:70:5a:1c:8e:20 Processing Access-Accept for mobile 8c:70:5a:1c:8e:20
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.842: 8c:70:5a:1c:8e:20 Applying new AAA override for station 8c:70:5a:1c:8e:20
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.842: 8c:70:5a:1c:8e:20 Override values for station 8c:70:5a:1c:8e:20
source: 4, valid bits: 0x200
qosLevel: -1, dscp: 0xffffffff, dot1pTag: 0xffffffff, sessionTimeout: -1
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.842: 8c:70:5a:1c:8e:20 Override values (cont..) dataAvgC: -1, rTAvgC: -1, dataBurstC: -1, rTimeBurstC: -1
vlanIfName: 'dy-data-ksb1', aclName: ''
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.842: 8c:70:5a:1c:8e:20 Inserting new RADIUS override into chain for station 8c:70:5a:1c:8e:20
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.843: 8c:70:5a:1c:8e:20 Override values for station 8c:70:5a:1c:8e:20
source: 4, valid bits: 0x200
qosLevel: -1, dscp: 0xffffffff, dot1pTag: 0xffffffff, sessionTimeout: -1
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.843: 8c:70:5a:1c:8e:20 Override values (cont..) dataAvgC: -1, rTAvgC: -1, dataBurstC: -1, rTimeBurstC: -1
vlanIfName: 'dy-data-ksb1', aclName: ''
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.843: 8c:70:5a:1c:8e:20 Applying override policy from source Override Summation:
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.843: 8c:70:5a:1c:8e:20 Override values for station 8c:70:5a:1c:8e:20
source: 256, valid bits: 0x200
qosLevel: -1, dscp: 0xffffffff, dot1pTag: 0xffffffff, sessionTimeout: -1
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.843: 8c:70:5a:1c:8e:20 Override values (cont..) dataAvgC: -1, rTAvgC: -1, dataBurstC: -1, rTimeBurstC: -1
vlanIfName: 'dy-data-ksb1', aclName: ''
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.843: 8c:70:5a:1c:8e:20 Setting re-auth timeout to 1800 seconds, got from WLAN config.
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.844: 8c:70:5a:1c:8e:20 Station 8c:70:5a:1c:8e:20 setting dot1x reauth timeout = 1800
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.844: 8c:70:5a:1c:8e:20 Creating a PKC PMKID Cache entry for station 8c:70:5a:1c:8e:20 (RSN 2)
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.844: 8c:70:5a:1c:8e:20 Adding BSSID 00:1e:be:a7:bf:b6 to PMKID cache for station 8c:70:5a:1c:8e:20
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.844: New PMKID: (16)
*Dot1x_NW_MsgTask_0: Sep 19 12:32:47.844:      [0000] 80 36

Dynamic VLAN assignment on SG300

Cisco documentation states that dynamic vlan assignment via RADIUS should provide the following IETF values:
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)—Set this to VLAN.
IETF 65 (Tunnel Medium Type)—Set this to 802
IETF 81 (Tunnel Private Group ID)—Set this to VLAN ID
I have done so with an Aruba Clearpass RADIUS server - but the Access-Accept message being sent below:
Radius:IETF:Tunnel-Medium-Type    6
Radius:IETF:Tunnel-Private-Group-Id    4
Radius:IETF:Tunnel-Type    13
is being received by the SG300 in some way that's not being interpreted correctly. Log files indicate that the IETF values are not what is expected:
07-Aug-2014 18:58:41 :%SEC-W-SUPPLICANTUNAUTHORIZED: username teststudent with MAC 00:11:25:d8:42:83 was rejected on port gi2 because Radius accept message does not contain VLAN ID
07-Aug-2014 18:58:41 :%AAAEAP-W-RADIUSREPLY: Invalid attribute 65 ignored - tag should be 0
07-Aug-2014 18:58:41 :%AAAEAP-W-RADIUSREPLY: Invalid attribute 64 ignored - tag should be 0
Is there something I'm missing here? These same values sent by the Clearpass RADIUS server are working for other switches such as Extreme and Brocade.
Thanks,
Aaron

Hi Aleksandra,
Here are the values from a packet capture of the Access-Accept message:

Dynamic vlan assignment does not work

Hello,
I have been trying to configure dynamic vlan assignment for the employee wlan. Trying to put the employee on vlan 20
Here are the components used
WLC: 2100 Software version: 7.0.240.0
AP: 3502I IOS version: 12.4 Mini IOS version: 7.0
Radius server: tried mutiple radius servers (rsa radius , free radius)
On the WLC:
1. Created a AAA server.
2. Along with management interface(vlan 10), configured dynamic interfaces (vlan 20, vlan 30)
3. AP manager interface is on vlan 40
4. Created WLAN assigned to management interface-- WPA2 (AES) , 802.1x
5. on AAA servers tab - checked authentication servers and assigned the AAA server. authentication priority order is set to only radius
Here, I have 2 options for radius overwrite.
one on the AAA servers tab
second on the Advanced tab
I have selected both. or one at a time
Ports between WLC and switch is a trunk
On the AP:
1. Local mode
2. Port between AP and switch switchport access - vlan 40
On radius server:
configured WLC's management interface as client
and assigned the following attributes
tunnel-type := vlan
tunnel-medium-type = ieee-802
tunnel-private-group-id = 20
When i try to authenticate with an iphone it is successful. But it puts me on the same interface as management interface (vlan10). When i do the packet capture i do see the access-accept but i dont see the attributes.
when i use a radius test utility against the radius server I do receive all the attributes.
Im a newbie on this. Iam i missing something here? any help will be much appreciated.

Kindly check the following link for reference.
sample configuration link
http://www.cisco.com/c/en/us/td/docs/wireless/controller/5700/software/release/3se/security/configuration_guide/b_sec_3se_5700_cg/b_sec_1501_3850_cg_chapter_01110.html
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70intf.html
Trouble shooting link
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/113485-acs5x-tshoot.html

Dynamic VLAN assignment with WLC and ACS for

Currently, using our autonomous APs and ACS, our users get separate VLANs per building based on their security level (students or staff). Basically, the student VLAN in one building is different from that of the student VLANs in other buildings on campus. Currently, we do this by filling the Tunnel-Private-Group-ID IETF RADIUS attribute with the VLAN name. This all works because each individual AP can map VLAN names to different VLANs like this:
dot11 vlan-name STUDENT vlan 2903
dot11 vlan-name FACSTAF vlan 2905
As we are working on our WiSM deployment, we see that the document below shows how to do the dynamic VLAN assignment on our WLAN controllers:
http://www.cisco.com/en/US/customer/products/sw/secursw/ps2086/products_configuration_example09186a00808c9bd1.shtml
However, we haven't figured out if it's possible to still provide our users with different VLANs for each building they're in.
With the instructions above, it looks like ACS uses a Cisco RADIUS Attribute to indicate the Air-Interface-Name, mapping an ACS/AD group to a single WLC interface which can only have one VLAN/subnet associated with it.
Does anybody know if what we're trying to accomplish is possible, or if we're really stuck with only one VLAN/subnet per mapped ACS group?

We only have the one WiSM for all of campus, so it's handling everything. This Cisco docs do indicate how to put differnet users in different Vlans, but we don't currently see a way to also put them in different subnets per building.
This being the case, any suggestions on how best to handle more than a Class C subnet's worth of users? Should we just subnet larger than Class C, or is there a more elegant way of handling this?

WLC- dynamic Vlan assignment with Radius

Hello, we would like to use this feature in our company and because of that I am now testing it. But I found one problem.
I created one testing SSID and two Vlans on WLC. On ACS I use an IETF atributes (064,065,081) for my account and I am changing Vlan ID (081) during testing.
It works with LEAP but when I use PEAP-GTC (which we use commonly in our company) the ip address is not assigned properly (ip which was assigned before remains).
Could you please help me?

There is good document which explains how to configure Dynamic VLAN Assignment with RADIUS Server and Wireless LAN Controller. This will help you. You will find the document at http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml

Flexconnect dynamic VLAN assignment doubt

Hi, all,
I am trying to understand how FlexConnect with dynamic VLAN assignment works. We have the need to dynamically put people in different VLANs based on their AD groups (all employees use the same SSID), I can understand that in traditional CAPWAP mode, AP just tunnels all traffic to WLC, WLC is the authenticator and it knows what users' identities are and can encapsulate user traffic to different VLANs before send the traffic to the switch it connects. Here is the part I don't understand:
1) If APs are operating in Flexconnect mode (APs are trunking to switches), how does each AP know what VLAN tag to put a specific user traffic on? AP is not authenticator, it knows nothing about associated client's AD identify. How does WLC convey the dynamical VLAN information to APs?
2) I want to eliminate WLCs in remote offices by letting all remote office APs join HQ WLC with FlexConnect mode, I can keep the same VLAN mapping scheme in remote office switching environment, in some offices I want to do local authentication (Domain controller + Radius Server), looks like I can specify Radius server in FlexConnect group, in this case will APs become authenticator? Since Radius clients have to be explicitly configured on NPS/Radius server side, does this means I have to statically configure each AP's IP?
3) I have over a dozen APs in HQ which are operating at FlexConnect mode, but the SSID's "local central authentication" checkbox is not checked, if I want to have local authentication in remote office, seems that I have to turn on "local authentication" on this SSID, does that mean I have to add each and everyone of those HQ APs to Radius/NPS server client list?
Thanks,

Hi ,
1) Aps knows about Vlans as we can define them inside the Flex connect groups. This is the same way we define flex connect ACLs which are pushed to the Flex APs and are returned by the Radius server later on.
2) If you are going for Central authentication + local switching ....WLCs will always act like central authenticator and would talk to the radius server. If you have some radius servers at the local site and you want them to use without going through the central authentication..you can do that using (local authentication + local switching). Yes, In this case AP will be authenticator and would be AAA client to be added in the Radius server.
3)yes ,,you are correct. If you want that your AP should do authentication and talk to the local radius server at the site , it has to be added in the Radius server.
Regards
Dhiresh
**Please rate helpful posts**

Dynamic vlan assignment with 1242AG and IAS not working

I'm having trouble getting the dynamic vlan assignment to work on my 1242AG Cisco Aironet APs. I've seen multiple cases with a similar setup and configuration where it works just fine. I've tried everything I can think of. Any suggestions?
IAS and AD is running on Windows Server 2003
Everything works fine except the vlan assignment. Wireless clients successfully authenticate through IAS and Active Directory, but instead of being switched to the appropriate vlan the client stays in whichever vlan/ssid it originally connected to.
PEAP is the authentication method, using MS-CHAP v2. Naturally I have the attributes in the policy set appropriately, ie:
Tunnel-Medium-Type > 802
Tunnel-Pvt-Group-ID > vlanid
Tunnel-Type > VLAN
On the AP:
Cisco 1242AG, C1240 Software (C1240-K9W7-M), Version 12.4(3g)JA, RELEASE SOFTWARE (fc2)
I've attached the config for the AP, which shows that I have two vlans/SSIDs set to cipher, aes, network eap, wpa, etc. I noticed that if the
Tunnel-Pvt-Group-ID attribute is set to a vlan id that doesn't exist on the AP then the AP makes an event log saying so.

Good! Well to answer your questions, IAS is sending numbers, i.e. Tunnel-Pvt-Group-ID > 129
I did view the debug from an AP which showed the Tunnel attributes being recieved from the radius server (I'll have to wait until Monday to get a copy though).
I see I don't have that line "aaa authorization network default group rad_eap",
So I'll have give it a try, (maybe I can remote in so I don't have to wait until Monday).
Thanks,
Jason

HREAP and Dynamic VLAN assignment (MS NPS)

Hi All
Just a quick rundown of what I am trying to achieve.
We have a Cisco 5508 WLC (running AIR-CT5500-K9-7-0-116-0.aes). At the moment the WLC is controlling only 1 AP (Cisco 1142N LWAP). I want this AP to be placed at a remote site, and users that authenticate via the RADIUS (MS Windows 2008 NPS) server must be assigned their respective VLANs based on the Active Directory groups they belong to (staff, student, or guest).
The AP and dynamic VLAN assignment works 100% if the AP is in local mode. Authentication works, and dynamic VLAN assignment works. As soon as you change the AP to HREAP mode, dynamic VLAN assignment stops working, and the client gets assigned an IP of whatever VLAN is assigned to the SSID under the HREAP tab. Allow AAA Override is enabled on the main SSID that I am broadcasting.
I have read in some of the discussions that HREAP does not support dynamic VLAN assignment, but I haven't seen why this is not supported. Is this true with the latest version of WLC software as well? I cannot see why local traffic destined for a local resource must be sent via a WAN link to the controller, and then back over the WAN link again. This seems very inefficient.
Is there anybody that can confirm if this is in fact an HREAP limitation, and why (if so) it is a limitation, please? Any info would be much appreciated.
Regards
Connie

Do you perhaps know if there are plans for this limitation being addressed in the near future?
We are looking to deploy wireless from end-to-end in all 6 of our sites, and you biggest competitor was penalized because they do not support this feature. It seems we're going to have to apply the same penalty in this respect to Cisco as well.
Thanks for the feedback, though!
Regards
Connie

Cisco WLC5508 Dynamic VLAN assignment error

Hi All,
We have a HA (SSO) WLC controller pair in two DC's with the Management Interface managing the AP's. The AP's are located in the Campus LAN and the Campus and DC networks are seperated by a L3 boundary.
The plan is for one of the WLAN's to provide Dynamic VLAN Assignment via radius as a test I wanted to use the existing Management interface to bind to the WLAN, but since working through the following Document ID: 71683 one thing I noticed whilst working through the the document states that "it is required that the VLAN-ID configured under the IETF 81 (Tunnel-Private-Group-ID) field of the RADIUS server exist on the WLC"
If the above statement is true and we don't stretch VLAN's between the Campus LAN and the DC network due to the L3 boundary does this mean that Dynamic VLAN assignment won't be achievable? When testing a client connection and debugging the result I receive the following:-
*radiusTransportThread: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a [BE-resp] AAA response 'Success'
*radiusTransportThread: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a [BE-resp] Returning AAA response
*radiusTransportThread: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a AAA Message 'Success' received for mobile 10:40:f3:84:a2:2a
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a processing avps[0]: attribute 11, vendorId 0, valueLen 11
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a processing avps[1]: attribute 64, vendorId 0, valueLen 4
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a processing avps[2]: attribute 65, vendorId 0, valueLen 4
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a processing avps[3]: attribute 81, vendorId 0, valueLen 2
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a processing avps[4]: attribute 8, vendorId 0, valueLen 4
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a processing avps[5]: attribute 79, vendorId 0, valueLen 40
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a Received EAP Attribute (code=2, length=40,id=64) for mobile 10:40:f3:84:a2:2a
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 00000000: xxxxxx
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 00000010: xxxxxx
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 00000020: xxxxxx
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a processing avps[6]: attribute 1, vendorId 9, valueLen 16
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a processing avps[7]: attribute 25, vendorId 0, valueLen 25
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a processing avps[8]: attribute 80, vendorId 0, valueLen 16
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a AAA override: Dot1x Authentication PMIP Client AAA Override Enable
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a AAA override: Dot1x Authentication, default MPC configuration
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.115: [PA] 10:40:f3:84:a2:2a Tunnel-Type 16777229 should be 13 for STA 10:40:f3:84:a2:2a
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.116: [PA] 10:40:f3:84:a2:2a Tunnel-Group-Id 9 is not a valid VLAN ID for STA 10:40:f3:84:a2:2a
*Dot1x_NW_MsgTask_2: Jan 15 13:26:23.116: [PA] 10:40:f3:84:a2:2a Received Session Key from AAA Server for STA 10:40:f3:84:a2:2a.
I've sanitised some of the debug output to protect the username but the net result is no IP address assigned to the client and unable to connect to the network.
Would appreciate any guidance as to whether the Wireless Client VLAN's need to be interfaces on the WLC in order to work or whether the likes of Flexconnect could alleviate the L3 boundary?
Thanks in advance.
Kind regards,
Mark

Hi All,
After playing with Flexconnect I managed to get the dynamic vlan assignment working.
Need to create the Flexconnect Group add in the AP's to the gorup and then select the ACL Mapping tab > AAA VLAN-ACL mapping and added in the VLAN of my VLAN that my Tunnel-Group-ID (VLAN ID) had assigned to me.
Client connected and received the correct IP configuration.
Thanks
Mark

802.1x RADIUS with EAP-TLS/EAP-TTLS & Dynamic VLAN Assignment

Hello, My team is looking for switches supporting 802.1x authentication on either EAP-TTLS or EAP-TLS protocols with dynamic vlan assignment enabled for these. Looking at the data sheets of the Linksys desktop switches, I found only SLM224G4PS and SLM224G4S models to support EAP-TLS or EAP-TTLS. Am I right? Do they support Dynamic VLAN Assigment for either of those protocols? This is not explicitly mentioned in the data sheets, and I happen to find switches from other manufacturers that announce to support EAP-TLS/EAP-TTLS but no dynamic vlan assignment. Thank you for any help.

SLM switches do support 802.1x RADIUS with EAP-TLS/EAP-TTLS unlike the SRW switches which support MD5. But I don't think that they support Dynamic VLAN.

802.1X for wired environments using Radius/ACS for Dynamic Vlan Assignment

Currently Being Moderated
802.1X for wired environments using Radius/ACS for Dynamic Vlan Assignment
Could someone please provide me with a simplest set of configuration steps to fire up Radius in ACS and 802.1X for dynamic vlan assignment. The objective is to roll out NAC L2 OOB using the 802.1X method for dymamic vlan assignments.
If possible show:
1. ACS/Radius Configurations.
2. End User Switch Configurations
Variables:
Switch A
MAC Address aaaa.bbbb.cccc     Vlan 10
            bbbb.cccc.dddd     Vlan 20
Also, if someone posts the Pros and Cons of using Radius/ACS/802.1X for Dynamic Vlan Assignments.
Other technology sets that can be used for Dynamic Vlan assignment EXCEPT from deprecated/obsolete VMPS.
Thanks in advance. .

Hi Guys,
    Hmmm, well if your just looking for Mac based authentication the good news is that is very easy. Just set create your Radius server, ACS, FreeRadius, Steelbelted radius etc. Then create user with the name of the Mac address, in other words if the mac address is 0012.0021.1122 the the name would be 001200211122 and the password would be the mac address. Then you set the vlan and tunnel stuff, like so tunnel-Type would be vlan, Tunnel-medium would be 802 and Tunnel-Private-Group-ID is the name of the vlan(not the vlan number)
   So for the Cisco ACS 4.x you would create a user as specified above, fill in all the password boxes with MAC address, I believe the mac has to be all lower case in the name and the password. Then check the Separate(Chap/MS-Chap/ARAP) box. Then you pick the group the machine belongs to, the group is the part that defines what vlan it is on.
   Before you create the user, create the group with info I wrote above and in addition specify the Service-Type as Authenticate Only.
    Freeradius is a bit harder to configure the specifics and I am just now testing a freeradius server so I do not know the process for Machine authentication.
    If, however, you are trying to authenticate a user that gets a bit trickier and is not so straight forward.

802.1x authetication with dynamic Vlan assignment by a radius server

Hi
At school I want to start using 802.1x authentication with dynamic Vlan assignment by a Windows Server 2012R2 Radius server.
When a student logs in, I want it to be placed in the "Students" Vlan, when a Administrative employee logs in, I want it to be placed in the "Administative" vlan and when the client is unknown I want to place it in the "Guest" Vlan.
I have several SG200 switches and I configured everything as mentioned in the administrative guide but I cannot get it to work as desired.
What does work:
- If the client is permitted, the switch changes to "authorized" state. (before anyone logs on to the domain with that client)
- When a User logs on that is part of the Administrative employees, the switch changes to "authorized" and when a student logs on, it changes to "unauthorized".
So far so good.
But what doesn't work:
- it does not put the administrative employee in the Vlan "Administrative", it just enables the port on the switch but leaves it in the default vlan 1.
- I can not find the Guest VLAN.
Any help would be appriciated.

Hi Wouter,
Can you see in the packet capture Radius accept message VLAN attribute? Also please ensure you have the latest firmware and boot code:
http://www.cisco.com/c/en/us/support/switches/sg200-26-26-port-gigabit-smart-switch/model.html#~rdtab1
I would recommend you to open ticket with Small Business team so they can go with you through packet capture and configuration steps:
http://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
Regards,
Aleksandra

Dynamic Animation Assignment

Similar Messages

Maybe you are looking for