Dynamic Button creation and alignment on standard OIF toolbar

Hello Experts,
I'm using IF_FPM_CNR_OIF->define_button method to create buttons which i require on the application toolbar of OIF dynamically. I can observer that all the buttons which got created are aligned next to other where the grouping is left aligned.
Now my requirement is, i need to group few of the buttons as left aligned and few buttons right aligned (which means that few buttons are starting from the right end of the toolbar and few to be from the left side). Can any one advice on how to achieve this?
Thanks alot in advance,
Regards,
Ravi.

Hi Julia,
Thanks alot for the reply.Currently the toolbar is configured in the configuration and i'm generating the buttons from the method. Is there any way possible in case i want to over write the toolbar from the configuration and create a static toolbar with necessary grouping? Please let me know in case there is any work around i can try.
Thanks again.
Regards,
Ravi.

Similar Messages

Dynamic Event Creation and Handling the events

Hi All
I am using WAS 6.4.
I have two components say Component A and Component B in which Component A is a reusable component and is used by other components say for e.g the Component B.
The following is the requirement.
Component A should create buttons for other components dynamically.
As an example, Component B specifies to Component A the buttons required say button B1 and button B2.
Component B also contains methods M1 and M2 for the buttons created by the component A.
Now I would like to associate these buttons created by component A with the methods created in Component B
The number of buttons that are to be created may vary from component to component.
If any one as any suggestion or solution, help me out.
Thanks
Regards
NagaKishore

Hi NagaKishore,
     I'm not exactly sure why you want to do this, but it is pretty easy if I switch it up a bit. (Maybe you are trying to create a navigation page or something?)
     Instead of your component B using component A, if you define a Web Dynpro interface in component A, then implement this interface in component B (or all component Bs), achieving your goal would not be too difficult. It could define a generic method (or event) with a "button key" as an argument that would tell component B which button was pressed and allow it to behave as desired. The Web Dynpro interface defined in A could also have an interface context that would allow the the button text to be passed along with (for the sake of simplicity) a "button key" that component that should be triggered when the button is pressed. (Note this could be a varying size list as required.)
     The component B(s) need not be known until run-time. They can be created using something like:
wdThis.wdGet<Used Compontne Name>ComponentUsage().createComponent(<Component Name>,<Object Name (if in a different component)>)
     Once the component is created, the context can be accessed giving the list of buttons to create and the values. The buttons can be created in the wdModifyView during the first pass of the creation of the view displaying the buttons (after the dynamic creation of the used components which can occur in the wdDoInit of the component controller).
     If the user presses a chosen button on component A, then the generic method (most likely an event) of component Bs interface is called and passed the "button key", component B then takes over. Note this would also work if component B had a visualization component that must be displayed through an interface view that is defined on the web dynpro component interface that is implemented by B.
     Hope this helps or at least triggers discussion that will answer your question,
       --Greg

Dynamic Button Creation in list toolbar

Hi all,
I have a requirement to add dynamic button in list guibb.
I have a ovp floorplan in which I used tabbed uibb. In tabbed uibb I used list uibb.
Now I want dynamic button in list toolbar.
Please give some suggestion which help me in achieving this.
Thanks & Regards,
Jitendra Sahu

Hi Julia,
Thanks alot for the reply.Currently the toolbar is configured in the configuration and i'm generating the buttons from the method. Is there any way possible in case i want to over write the toolbar from the configuration and create a static toolbar with necessary grouping? Please let me know in case there is any work around i can try.
Thanks again.
Regards,
Ravi.

Dynamic component creation and population

I'm trying to create a page such that , based upon some backing bean, a different component would be rendered and populated based upon a property in that bean.
For instance
public class MyBean {
private int type;
private String data;
getters/setters...
}Say the type can be sex (a radio button component), level of user (selectOne with the values of gold, platinum and silver) or location (a textfield) (these are an example of the type of data--there are many more entries that are of one of these three component types that need to be handled). I have a list of these beans that could go in a dataTable or whatnot, so I'd like to be able to dynamically generate the components. Does anyone have any suggestions or input?
My guess is a component will need to be returned from the bean that describes how it should be rendered--I'm just looking for a jumpstart on the best way to do this, see if anyone has code snippets, references, etc.
TIA.
P.S. Apologies if this is posted twice...some errors when I tried to post this the first time...

So, are you saying to have all three types of components in a given line of the datatable, wire each up to do have the appropriate values (male/female or silver/gold/platinum) and then have a rendered argument read a bean property such as isRadio, isSelect or isText and just render the appropriate one?

Dynamic Structure creation and assigning data.

Hi,
I have a structure and a work area,
DATA: begin of sample_struct,
      elem1 type xxx,
      elem2 type yyy,
      elem3 type zzz,
      end of sample_struct.
DATA: wa_sample_struct type sample_struct.
DATA: lr_rtti_struc TYPE REF TO cl_abap_structdescr.
DATA: lt_comp       TYPE cl_abap_structdescr=>component_table.
DATA: ls_comp       LIKE LINE OF lt_comp.
DATA: l_index       TYPE string.
DATA: lr_data       TYPE REF TO data.
DATA: lr_table      TYPE REF TO
I create a new structure at run time extending the sample_struct to add few more components at run time like this.
lr_rtti_struc ?= cl_abap_structdescr=>describe_by_data(wa_sample_struct).
    lt_comp = lr_rtti_struc->get_components( ).
do 10 times.
      l_index = sy-index
      concatename 'element' l_index into ls_comp-name
      ls_comp-type = cl_abap_elemdescr=>get_string( ).
      APPEND ls_comp TO lt_comp.
enddo.
Then i create a work area of this new structure like this.
lr_rtti_struc = cl_abap_structdescr=>create( p_components = lt_comp ).
    CREATE DATA lr_data TYPE HANDLE lr_rtti_struc.
    ASSIGN lr_data->* TO <fs_data>.
Now <fs_data> is a work area for the structure.
I can move the data in wa_sample_struct into <fs_data> like this.
move-corresponding wa_sample_struct to <fs_data>.
My problem is how do i access the dynamic components of this work area so that i can assign data to those components.
If anybody knows how to access the dynamically added components of <fs_data> so that I can assgin data to those.
Thanks in advance
Sesh
Message was edited by: Seshatalpasai Madala

Hi,
      Looks like the problem is not well stated as I am getting answers which are not relevent.
My existing structure.
DATA: begin of sample_struct,
elem1 type xxx,
elem2 type yyy,
elem3 type zzz,
end of sample_struct.
I create a new structure using this structure at runtime by adding new fields which are in a internal table. I add the new fields as follows.
loop at it_tab into wa_tab.
ls_comp-name = wa_tab.
ls_comp-type = cl_abap_elemdescr=>get_string( ).
APPEND ls_comp TO lt_comp.
endloop.
This internal table is built using the user input. So I dont know how many and what are the values in the internal table.
LT_COMP has the existing structure field's as well as the newly added fields for my new structure.
I create a new structure using this component list LT_COMP.
DATA: lr_rtti_struc TYPE REF TO cl_abap_structdescr.
lr_rtti_struc = cl_abap_structdescr=>create( p_components = lt_comp ).
Now I have an object of cl_abap_structdescr. Which I can use as a data type for defining Workarea and internal table of this structure like this.
CREATE DATA lr_data TYPE HANDLE lr_rtti_struc.
ASSIGN lr_data->* TO <fs_data>.
I can access all the existing fields of the strucutre like this.
<fs_data>-elem1
<fs_data>-elem2
My problem is how do i access the newly added fields of the strucutre as I dont know the names of the fileds(I know them only at runtime).
I hope I have explained it well enough, hope to see a relevent answer for the above problem.
Thanks in advance.
Sesh

Button Creation and calculation

Hi,
This probably might be a repetitive question, but I couldn't find an answer in the forum that am looking for.
My need is to compute/process 2 form variables (COST) based on a value of 1 form variable (QTY). All these fields are database column. These values are entered during data entry of a row. What I need is when I click on a button "CALC" (created next to an item "QTY"), I need to show 2 computed value "cost" (pl/sql code).
I tried creating a button and a process "on submit - after computation and calculation" and entered the code in source as
:P3_COLUMN_NAME1 := 100;
:P3_COLUMN_NAME2 := 100; (for eg: assigning static value of 100)
And after I click the button I don't see the value being displayed on tbe screen.
Can someone help?
Thanks,
Taj

Assalam alaikum wr. wb. Raj
I think that your question may be answered indirectly by a question that I recently asked on this forum. I wanted to know how to clear a field like placing :p2_file_name in pl/sql code. Its kind of like what you are trying to do. The only difference is you are assigning a value like 100. If you follow this link and read the response from Chris, I think it will solve your question inshAllah. Here is the link:
Re: How do you clear a field?
Wasalam,
Emad

Creation of satic and dynamic buttons in a view

Hi,
I have created a dynamic button using the code..
DATA: lr_container TYPE REF TO cl_wd_uielement_container,
        lr_button TYPE REF TO cl_wd_button.
CHECK first_time = abap_true.
lr_container ?= view->get_element( id = 'ROOTUIELEMENTCONTAINER' ).
cl_wd_matrix_layout=>new_matrix_layout( container = lr_container ).
lr_button = cl_wd_button=>new_button( id         = 'BUTTON'
                                        text       = 'My Button'
                                        on_action = 'ACTION' ).
cl_wd_matrix_head_data=>new_matrix_head_data( element = lr_button ).
lr_container->add_child( the_child = lr_button ).
its working fine and iam able to see the button .....but when i create another button thorugh layout design its going for dump....whats the reason .?
Cant we create static and dynamic buttons at a time?
Thanks,.
Shailaja Ainala.

Hi Shailaja,
Yes you can add static and dynamic ui elements together in the same view.
The possible problem here could be the way in which the ui elements are added.
You have created the dynamic button under the root container uielement.
What about you static button ? Check your layout and layout data property.
Thank You,
Radhika.

Dynamic Internal Table creation and population

Hi gurus !
my issue refers to the slide 10 provided in this slideshow : https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b332e090-0201-0010-bdbd-b735e96fe0ae
My example is gonna sound dumb, but anyway: I want to dynamically select from a table into a dynamically created itab.
Letu2019s use only EKPO, and only field MENGE.
For this, I use Classes cl_abap_elemdescr, cl_sql_result_set and the Data Ref for table creation. But while fetching the resultset, program dumps when fields like MENGE, WRBTR are accessed. Obviously their type are not correctly taken into account by my program.
Here it comes:
DATA: element_ref             TYPE REF TO cl_abap_elemdescr,
      vl_fieldname               TYPE string,
             tl_components         TYPE abap_component_tab,
             sl_components         LIKE LINE OF tl_components_alv,
linetype_lcl               TYPE REF TO cl_abap_structdescr,
ty_table_type            TYPE REF TO cl_abap_tabledescr,
g_resultset             TYPE REF TO cl_sql_result_set
u2026
CONCATENATE sg_columns-table_name '-' sg_columns-column_name INTO vl_fieldname.
* sg_columns-table_name contains 'EKPO'
* sg_columns-column_name contains 'MENGE'
* getting the element as a component
element_ref ?= cl_abap_elemdescr=>describe_by_name( vl_fieldname ).
sl_components-name = sg_columns-column_name.
sl_components-type ?= element_ref.
APPEND sl_components TO tl_components.
* dynamic creation of internal table
linetype_lcl = cl_abap_structdescr=>create( tl_components ).
ty_table_type = cl_abap_tabledescr=>create(
                  p_line_type = linetype_lcl ).
u2026
* Then I will create my field symbol table and line. Code has been cut here.
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
u2026
* Then I will execute my query. Here itu2019s: Select MENGE From EKPO Where Rownum = 1.
g_resultset = g_stmt_ref->execute_query( stmt_str ).
* Then structure for the Resultset is set
CALL METHOD g_resultset->set_param_struct
    EXPORTING
      struct_ref = dy_line.
* Fetching the lines of the resultset => Dumpu2026
WHILE g_resultset->next( ) > 0.
    ASSIGN dy_line->* TO <dyn_wa>.
    APPEND <dyn_wa> TO <dyn_table>.
ENDWHILE.
Anyone has any clue to how prevent my Dump ??
The component for MENGE seems to be described as a P7 with 2 decimals. And the resultset wanna use a QUAN type... or something like that !

Hello
I have expanded your sample coding for selecting three fields out of EKPO:
*& Report ZUS_SDN_SQL_RESULT_SET
*& Thread: Dynamic Internal Table creation and population
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1375510"></a>
*& NOTE: Coding for dynamic structure / itab creation taken from:
*& Creating Flat and Complex Internal Tables Dynamically using RTTI
*& https://wiki.sdn.sap.com/wiki/display/Snippets/Creating+Flat+and+
*& Complex+Internal+Tables+Dynamically+using+RTTI
REPORT zus_sdn_sql_result_set.
TYPE-POOLS: abap.
DATA:
go_sql_stmt       TYPE REF TO cl_sql_statement,
go_resultset      TYPE REF TO cl_sql_result_set,
gd_sql_clause     TYPE string.
DATA:
gd_tabfield      TYPE string,
go_table         TYPE REF TO cl_salv_table,
go_sdescr_new    TYPE REF TO cl_abap_structdescr,
go_tdescr        TYPE REF TO cl_abap_tabledescr,
gdo_handle       TYPE REF TO data,
gdo_record       TYPE REF TO data,
gs_comp          TYPE abap_componentdescr,
gt_components    TYPE abap_component_tab.
FIELD-SYMBOLS:
<gs_record>   TYPE ANY,
<gt_itab>     TYPE STANDARD TABLE.
START-OF-SELECTION.
continued.

I want to create a "Play All" chapter marker that will play the video from start to finish in addition to the standard chapters I have-I guess I can auto start the DVD but would prefer a button-how and where would I put this "play all" marker??

I want to create a "Play All" chapter marker that will play the video from start to finish in addition to the standard chapters I have…I guess I can auto start the DVD but would prefer a button…how and where would I put this "play all" marker?? Thanks..

The start chapter button is a play the whole movie button regardless of how many other markers you have.
Once a DVD starts playing it continues to the end.
Chapters marker simply gives the viewer a place to start playback whether it be the start, middle or near the end.
Al

Add dynamic buttons to each report row and bind the row data to buttons specific to that row

I have a page with a form at the top and a report at the bottom which is tied to a table. I need to add a pair of buttons for each row of the table and add dynamic actions for these buttons. I need to submit the data corresponding to the row to a REST service and refresh the table/row. I know it is possible to add ajax call and refresh the table after the response is received. But I am not sure how I can dynamically include a pair of buttons on each row and have the access the data corresponding to the record when a particular button is clicked. I was not able to find such a feature using the help page. Can you please let me know if this is possible. Thanks in advance.
Below is the representation of how I need the page to look like.
Col 1
Col 2
Col 3
data 1
data 21
data 31
Button 1
Button 2
data 2
data 22
data 32
Button 1
Button 2
data 3
data 23
data 33
Button 1
Button 2
data 4
data 24
data 34
Button 1
Button 2
I should be able to access data 1, data21, data 31 from button 11 and button21 etc.

select data1,
          data2,
          data3,
          null button1,
          null button2,
          rowid r_id
from .....
If you edit the column for button1 and navigate to the Column Formatting region you can create your button here, several different ways. You will need to play around with how you prefer. See below:
<input class="button1" type="button" id="#R_ID#" value="label for the button" /> or <button id="#R_ID#">label for button</button> or you could use <a> and apply css of your theme.
You also create both buttons in a single column. From here you can reference any of the columns from your select by using the #COLUNMNAME# format (as I did with R_ID).
You will next need to something similar for all columns you want to be able to grab when you click the buttons. See below:
--- This would be for data1 column
<span id="D1-#R_ID#">#DATA1#</span>
You would do these for each column that you want access to when button clicked as mentioned above. You could bypass this step and use jquery to traverse the DOM using .closest() and .find() and give each column a distinct class. Is is your preference.
You would then create a dynamic action triggered when .button1 is clicked. Now that you have that object you can get the id of the triggering object which would be your r_id and from there you can access all your individual data points(all this done in a javascript in the dynamic action) and assign to hidden items on your page. The next step of that dynamic action you could execute pl/sql and pass those in page items.
Hope that all makes sense.
David
Message was edited by: DLittle
Just as a bit of clarification: the r_id column does not have to be rowid, but it does need to be unique for each row return. You could use your primary key or rownum. Whatever works for your scenario.

Create button choices and dynamically assign actions to them.

Hi,
I'm currently working on SAP Commercial Project Management which use Floor Plan Manager.
Here, I've to create button choices and assign some actions to the button choice values dynamically.
Please let me know, what's the process to do that .
Regards,
Arnab

chk this
Passing default value to bind variable on page load.
http://adfcodebits.blogspot.com/2010/03/bit-2-setting-bind-variable-value.html

How to Create Dynamic button at runtime and save it by using c#?

Hi All,
Can someone please provide me code to create button dynamically at runtime and save it permanently?
Your quick help is appreciable.
regards,
Sourabh

You cant add controls to the visual tree a runtime which persist beyond the lifetime of the application. You will have to persist an indicator to your program which tells it to add the control. Adding a control is as simple as initializing
it and adding it to a parent already on the tree. Controls can be created programmatically or using the XamlReader.Load static method. You can find XamReader.Load in Windows.UI.Xaml.Markup in windows 8.1, Windows 8.1/Windows Phone unified
projects. For old windows phone ad just Silverlight I believe it is in System.Windows.Markup.
Hope this helps.

Scenarios to use dynamic UI access and creation.

Hi,
I would like to know the possible scenarios to use Dynamic UI creation or access. Since so far I don't find any compelling need to use dynamic UI creation or other dynamic access to UI element.
ThanQ for Ur time.
Cheers,
Sam

Hi Sam.
Dynamic Ui creation is only neede if you do not know which or how many UI
elements you need during design time.
We have one scenario where we need to generate select options for reports dynamically. The
select options are defined in application tables and read during run time. So
depending on the defined option in the table for a certain report, the selction UI is
built dynamically.
Many cases can be handled by using context attributes for the UI element
properties e.g. (read only, visibility or required/normal item). We have some views
where only certain user types have to enter certain data. So depending on the
user type the visibility or required property of input fields is controlled by context
sttibutes.
But this is just one point of view. I guess there cvan be a lot of scenarios where
dynamic UI creation is needed.
Anyway, always consider that dynamic UI creation is less maintainable cause
code is harder to read and understand.
Cheers,
Sascha

Dynamic internal table and dynamic field catalog

hi
i need to decide the number of fields of the internal table at runtime
and then need to pass value to this internal table.
then i need to create the field catalog for this internal table (so here
field catalog is also dynamic) to display in alv.
how to achieve this dynamic internal table creation and dyanmic field catalog generation

Hi Ajay,
U can use the below code to create a dynamic internal table.
*adding the field names only once for the dynamic table     .
      MOVE 'PRCTR' TO gw_component-name.
      gw_component-type ?= cl_abap_elemdescr=>get_string( ).
      INSERT gw_component INTO TABLE gt_components.
      MOVE 'RCNTR' TO gw_component-name.
      gw_component-type ?= cl_abap_elemdescr=>get_string( ).
      INSERT gw_component INTO TABLE gt_components.
      MOVE 'RACCT' TO gw_component-name.
      gw_component-type ?= cl_abap_elemdescr=>get_string( ).
      INSERT gw_component INTO TABLE gt_components.
      MOVE 'RYEAR' TO gw_component-name.
      gw_component-type ?= cl_abap_elemdescr=>get_string( ).
      INSERT gw_component INTO TABLE gt_components.
      MOVE 'YTDBAL' TO gw_component-name.
      gw_component-type ?= cl_abap_elemdescr=>get_string( ).
      INSERT gw_component INTO TABLE gt_components.
      MOVE 'OBAL' TO gw_component-name.
      gw_component-type ?= cl_abap_elemdescr=>get_string( ).
      INSERT gw_component INTO TABLE gt_components.
*get structure descriptor -> GR_STRUCTDESCR
          gr_structdescr ?= cl_abap_structdescr=>create( gt_components ).
create work area of structure GR_STRUCTDESCR -> GR_WA
          CREATE DATA gr_wa TYPE HANDLE gr_structdescr.
          ASSIGN gr_wa->* TO <gw_wa>.
determine key components -> GT_KEYS
          MOVE lv_value1 TO gw_key-name.
          INSERT gw_key INTO TABLE gt_keys.
create descriptor for internal table -> GR_TABLEDESCR
          gr_tabledescr ?= cl_abap_tabledescr=>create( p_line_type = gr_structdescr
                                                       p_table_kind = cl_abap_tabledescr=>tablekind_hashed
                                                       p_unique     = abap_true
                                                       p_key        = gt_keys
                                                       p_key_kind   = cl_abap_tabledescr=>keydefkind_user ).
create internal table -> GR_ITAB
          CREATE DATA gr_itab TYPE HANDLE gr_tabledescr.
          ASSIGN gr_itab->* TO <gt_itab>.
          CREATE DATA gr_itab LIKE STANDARD TABLE OF <gw_wa>.
          ASSIGN gr_itab->* TO <gt_sttab>.
Now u r internal table named <gt_sttab> has been created with fields like RCNTR, PRCTR,RACCT, RYEAR etc whatever the field u need u can go ahead and create dynamically.
then by using the table <gt_sttab> u can create u r field catalog.
Regards,
Rose.

Does Seeburger's SFTP adapter support dynamic filename creation

Hi all,
Does the SFTP adapter support dynamic filename creation.
If yes, then do we have to use UDF's and are there any specific settings that have to be done in the SFTP communication channel.
Please provide a blog which helps in the configuration process of the above case.
thanks,
younus

Dynamic Creation of File using counter in Seeburger Variable:
1. Configuration Needed in the Communication Channel:
The process of dynamic creation of files can be done we have to select the following checkbox in the receiver channel:
Dynamic Attribute in receiver Channel:
Import the following modules:
Localejbs/Seeburger/solution/sftp
Localejbs/Seeburger/AttribMapper
Localejbs/ModuleProcessorExitBean
Enter the desired file naming convention:
Use the Parameter GetCounter("ID") to the place where the counter is expected to come.
2. Configuration Needed in the SeeBurger Workbench:
If the J2EE server is listening on a port different from 50000 (which is the standard for the SAP client 000), the port number must be configured:
Login into the seeburger workbench using the URL
http://<localhost>:<port number>/seeburger/index.html
Select Property Store.
Create or edit the following property:
Parameter
Value
Namespace
http://seeburger.com/xi/SeeFunctions
Key
provider.servlet.server
Value
http://localhost:50000/ (where the port number 50000 must be set
accordingly to the J2EE server configuration).
Note: The configured value (server URL) has to end with a slash (/). Otherwise,
SeeFunctions will not work correctly.
If we need to start the counter from any specific value , it can be configured in the SeeBurger workbench, this value can be maintained in Mapping Variables :

Dynamic Button creation and alignment on standard OIF toolbar

Similar Messages

Maybe you are looking for