Dynamic call for ADOBE FORMS
Hi ,
I want to call Adobe forms with dynamic table .
Some one please explain me how I can implement this in ADOBE interface ?
Any Pointers or Help higly appreciated.
Thanks
James
hi
Check this
Difference between Smart Forms and Adobe Form
Re: Smart Forms & Adobe Forms
Adobe forms
/message/4983958#4983958 [original link is broken]
Re: adobe forms
adobe forms
adobe forms
adobe forms
Similar Messages
-
Call for adobe form is going for dump for multiple users
hi,
i am calling an adobe form in a program i.e. for multiple users. now my problem is.....
3 people are using same tcode to generate the adobe form output for different data. but when they click at a time on the button to generate the adobe output, then adobe form is coming for only one user and it is going for dump for other users.
and this dump is coming because of exception "CX_FP_API_INTERNAL" in funtion module FP_FUNCTION_MODULE_NAME which i am using to get the function module name of the adobe form in my program.
can u please give me some solution to rectify this issue....That's nothing!
An engineer and I contacted Adobe technical support by phone to ensure the PC I was having custom built was configured to its optimum. They advised XP64 as the best operating environment. After that discussion we had to completely revise procurement, etc to get the bits and compatible XP64 compatible software, putting the build project back a few weeks as well, Imagine how I laughed when I found out on one of these forums that XP64 is the worst choice and totally unsupported by CS4!
I have written to Shantanu Narayen, Adobe CEO and didn't even get an acknowledgement I raised this last week on the Adobe stand at BVE and was told they'd get someone to contact me asap but guess what, niet...! To be fair there has been one Adobe executive that recognises the problem and the damage poor customer support is causing the company; he has been as helpful as he can. Unfortunately, it seems the overall Adobe culture at the top is "get the money and run". If your problem goes beyond what's already on their web pages, tough luck!
Regards,
Graham -
Hi experts ,
Can anyone guide me for writing a driver program for ADOBE forms ( created using SFP transaction) . I have created the form but dont know how to run it using a driver program since i m new to SFP.
Plz help me.
Message was edited by:
suchita phulkarSuchita,
You can check this code.. This is purley to run the ADOBE form, above one is to run a smart form.
*& Form print_form
* Subroutine to print the form
FORM print_form .
DATA : l_fmname TYPE funcname,
l_params TYPE sfpoutputparams,
l_docparams TYPE sfpdocparams,
l_formoutput TYPE fpformoutput.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = 'Z_CERT_CONTINU_FORM'
IMPORTING
e_funcname = l_fmname
* E_INTERFACE_TYPE =
* l_params-getpdf = 'X'.
l_params-nodialog = ''.
l_params-preview = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = l_params
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
l_docparams-langu = 'E'.
CALL FUNCTION l_fmname
EXPORTING
/1bcdwb/docparams = l_docparams
g_regis = g_regis
g_date = g_date
g_frmname = g_frmname
g_comp = g_comp
IMPORTING
/1bcdwb/formoutput = l_formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " print_form
Thanks,
Sreekanth
<i>*-- Please close the post and do not forget to reward if it helps you</i> -
Error "Job already started" when calling a adobe form in Z function module
Hi All,
I have a error when calling a adobe form in a custom function module.
I am using FP_FUNCTION_MODULE_NAME to get the adobe form function module and then i am using FP_JOB_OPEN function module to control the printing parameters such as no print preview or no dialog ..etc.. I dont have any exceptions during the call of FP_JOB_OPEN function module ..
Later I am calling my function module which was generated for the adobe form and i am getting the error called " JOB ALREADY STARTED".
I tried executing the same function module in se37 and the PDF form output was generated, and also by commenting FP_JOB_OPEN function module the PDF form output was generated.
But i need the FP_JOB_OPEN function module to control the output based on the output type which triggers the form output such as the medium from nast record which says print or email or fax.. etc
Please let me know how to handling this error.Just as a followup note. If you are testing a function module from SE37 and the test button you will get a value in SY-CPROG. You must override this value for everything to work.
If you override the value of SY-CPROG with the main program that will be calling the function module you have no problem.
John W. -
Merging of cells of a dynamic table in adobe form
Hi,
I am trying to Merge 2 columns in a dynamic table in adobe form.The requirement is to merge column 3 and column 4 if column 4 is empty. I used the below javascript code in both "Form ready " and Initialize event of the row.
if (this.Cell4.rawValue == " ")
this.Cell3.colSpan = "2";
this.Cell4.presence = "hidden";
Note : Since above code was not working , i used the below code in my subform also but it did not returned desired output.
if(Table22.Row1.Cell1.rawValue == " ")
Table22.Row1.Cell3.colSpan = "2";
Table22.Row1.Cell4.presence = "hidden";
The problem is that in my dynamic table , its the second row where the requirement is fulfilled ie in the 2nd entry of my table the column4 is blank (the exact row number might change depending on input data).
is there a way to loop in the dynamic table and check if column 4 is empty for a particular row.
the above code does not help to fulfill my requirements. kindly help.
Thanks
AditiHello Aditi priya,
Hope you are doing good..
Please go through my recent blog..
http://scn.sap.com/community/interactive-forms-by-adobe/blog/2015/01/02/merging-internal-table-cells-dynamically-in-sap-adobe-forms-using-java-script-code
I hope you will find all answers from this blog..Reward if helpful...
Thanks & Regards,
B Raghu Prasad -
Need to configure output type for adobe form
Hello All,
I need to configure output type for Adobe Form thru NACE. What would be print program and how do I call my form from that program? and, what would be the FORM routine for that form in NACE?
I'm little confused, Pls I need your help.
Thanks in advance,
ChandraHi,
Just before few weeks we did this task.
Say for example if you want to print PO details through ADOBE form instead of normal sapscript layout or standard MEDRUCK, you can follow the following steps.
1. Design the form in SFP tcode, by passing the necessary inputs through form interface.
2. Then use tcode tcode NACE and select EF as application and click output types button on the application tool bar. Select NEU output type and double click processing routines on left side.
3. Then, in the right side of the screen we can see the calling program and the form (may be sapscript or smartform) whatever used.
4. For form names we have two options in NACE tcode.
One is Form and the otherone is PDF/Smartform Form. If you are using adobe form give your form name under PDF/Smartform and also select PDF under the type option in the same screen.
This worked perfectly for us. But pass the required parameters to the form from the routine used in standard program.
If any queries please post it. -
Hi,
I have an RFC that calls an adobe form to display the pdf output back in a bsp page...the RFC fails at the call to the adobe form (next call after after getting the form name) ...while debugging it looks like within this call it is trying to call fpcomp_job_open and failing on the call check_job_open ...
The code in my RFC looks like this....
DATA:
gs_outputparams TYPE sfpoutputparams,
fn_name TYPE rs38l_fnam,
fp_docparams TYPE sfpdocparams,
fp_formoutput TYPE fpformoutput,
frm_result TYPE sfpjoboutput,
lv_form TYPE fpname.
DATA: l_pdf_xstring TYPE xstring,
l_pdf_len TYPE i.
lv_form = 'ZHR_ASSESSMENT_FORM'.
Start formrocessing - OPEN spool job to send to printer
gs_outputparams-getpdf = 'X'.
call function 'FP_JOB_OPEN'
changing
ie_outputparams = gs_outputparams
exceptions
others = 1.
IF sy-subrc <> 0.
*// RAISE FP Open Error.
exit.
ENDIF.
Get name of the generated function module for the form
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = lv_form
IMPORTING
e_funcname = fn_name.
IF sy-subrc <> 0.
*// RAISE FP Get Form Module Name Error.
exit.
ENDIF.
Call the Adobe Form
CALL FUNCTION fn_name
EXPORTING
/1bcdwb/docparams = fp_docparams
gv_appraisal_id = gv_appraisal_id
IMPORTING
/1bcdwb/formoutput = fp_formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
others = 4.
IF sy-subrc <> 0.
*// RAISE Call Form Module Error.
perform f_build_message using 'E'
'ZEXT'
012
changing return.
exit.
ENDIF.
End from processing - Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
e_result = frm_result
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
*// RAISE FP Close Error.
exit.
ENDIF.
form = fp_formoutput-pdf.
Thanks,
Venkateshwhat is the solution for this problem? I have the same problem. I get sy-subrc = 1 after CALL FUNCTION 'FPCOMP_JOB_OPEN'.
If I look more in detail I see that "Perform check_job_open" is creating the problem:
FORM check_job_open.
IF fpstat-is_opened = c_true. (--> exactly here is the problem. This condition is true so the program is terminated.)
PERFORM reset_status.
MESSAGE ID 'FPRUNX' TYPE 'E' NUMBER '101' RAISING usage_error.
ENDIF.
fpstat-is_opened = c_true.
fpstat-is_started = c_false.
ENDFORM.
Does somebody know why my job is open and what is the solution to have the job closed at the beginning of my processing?
Thanks in advance. -
How to create a Webservice for Adobe Form(I need Coding)?
Hi,
I need coding for Webservice inorder to define the context structure for Adobe Form.
In AdobeForm:
1) I create a dataconnection and while creating it i need to give WSDL Url.
2) I have created it.
3) But iam not getting the Context structure in the Dataview.
For this wht coding i need to write in WSDL File?
Any Help is Highly aprreciated with Points.
Very urgent requirement?Hi,
I'm not exactly sure what your problem is.
A description on how to call web services can be found in my blog:
/people/juergen.hauser2/blog/2008/02/25/using-web-services-with-sap-interactive-forms-by-adobe-overview-tips
If you are facing an issue with what is displayed in the data view for the WSDL data connection (i.e you are missing nodes) you could try to use Designer 8.0 instead since it cotains bug fixes in that area.
Regards,
Juergen -
How does Time Statment Web Dynpro calls an Adobe Form of R3?
Hi forum
I want to know how works the Web Dynpro of Time Statement. The cause of my dude is that this dynpro shows an Adobe Form that is into R3, not in NWDS and Adobe. I want to calls some Adobe Forms since a Web Dynpro for Java. Some body knows how to do this.
Thnks
Josué CruzHi,
If you go for TC HRFORMS, there you can find some HRFORMS global. we need to activate that form and configure the feature called "HRFOR". This works once implemented time evalution.
Thanks & Regards. -
Driver program for adobe form error no job started
Hi
Iwhen I execute driver program for adobe form the program generates error no job started.
the print dialog box appears but when I pressed print preview button it generates this error no job started.
I don't know why it's happening please help.Hi
Iwhen I execute driver program for adobe form the program generates error no job started.
the print dialog box appears but when I pressed print preview button it generates this error no job started.
I don't know why it's happening please help. -
Problem with Configuration of GP for Adobe Forms
Hi,
I following the guide 'Configuration of GP for Adobe Forms' (from Configuration of GP for Adobe Forms )
When i try to configure 'Web Service Clients' in the visual administrator:
Configure this parameters:
- Destination URL SLD
- Authentication BASIC
- User
- Password
but the frame with this parameters:
-- System Name
-- WS Name
-- WS Port
don´t show.
I think it is an error in swing because the title 'System Landscape Synchronization' show but the scrollbar stop there.
Features:
Netweaver 04s
Visual administrator 7 SP 9 java version 1.4.2_09
Thank you in advance
with Regards, MarianoHi,
please check out this link it might help you
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee8a84ea-0c01-0010-5691-accfb0a172ed
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8a696cea-0c01-0010-d494-9b0b8ce7565f
**********please reward points if the information is helpful to you*************** -
Good morning everyone! I would like to ask how can i subscribe for adobe forms central 11.99$ per month. I am currently here in United Arab Emirates. I really need to use this application cause it will benefit me a lot in my work. Thanks!
Hi,
OK. Following instructions, I've uninstalled the old Flash Player and installed the right one, and videos are now playing. Thanks for pointing me to the other posts on this site. YouTube and other videos are now playing
Some of the videos still play jerkily (they don't stream evenly). A few stream evenly once they've been allowed to buffer fully. (I think I'm using these terrms correctly.) Is this solely caused by low bandwidth, or is there something—an adjustment of some kind—that I can do with Flash Player to have online videos stream evenly, even from the moment I start them?
As I mentioned, to bypass this uneven streaming while watching online, I download the videos and watch them usually using Quicktime Player 7.6.4. Still, they don't always play evenly, but for the most part do.
I've just tested bandwidth and I'm told:
5.63 Bbps Download speed
0.63 Mbps Upload speep
Rafael -
Standard print program for Adobe Forms
Hi all -
Does anyone know if there was a standard print program delivered for the predelivered Adobe form F110_AVIS_INT? And if there is - what is it? Is there any document anywhere to determine predelivered print programs for Adobe forms?
Your help is much appreciated!
Thanks
AbbyHi
In SAP you can check for the Print Programs in Tcode <b>OB96</b>
which gives assignment of programs to script layouts
see the links related to Adobe forms
look at the Adobe page here in SDN:
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
Reward points for useful Answers
Regards
Anji -
Regular expression not working for adobe forms
Hi,
Iam using qtp for adobe forms and for some reason if i put in regular expression for apid value it doesn't recognise the object..there is nothing wrong with the regular expression as it is evaluated using regular expression evaluator in qtp 11.0....any ideas
I got all the addins and everything and when i used regular expression for the top window it works but for any other object it doesn'tPlease try the code and see the problem. The regular expression is fine.
I can replace the string with these and got results like this:
import java.util.regex.Pattern;
public class HtmlFilter implements TextFilter {
private static String strTagPattern = "<\\s?(.|\n)*?\\s?>";
private static int patternMode = Pattern.MULTILINE | Pattern.CASE_INSENSITIVE | Pattern.UNICODE_CASE | Pattern.CANON_EQ;
private static Pattern tagPattern = Pattern.compile(strTagPattern, patternMode);
public String filter(String t) {
if(t==null || t.length()==0) return "";
String ret = null;
return tagPattern.matcher(t).replaceAll("");
public static void main(String[] args) {
System.out.println(new HtmlFilter().filter(null));
System.out.println(new HtmlFilter().filter(""));
System.out.println(new HtmlFilter().filter("<P>abc def</P>"));
System.out.println(new HtmlFilter().filter("<P>我国石油供应安全系统影响</P>"));
}The results are
abc def
???????????? -
Docs needed for Adobe forms development in ABAP Workbench
Hello Friends,
I need documents on how to develop adobe forms using abap workbench in SAP R/3 system.
Please send the documents to [email protected]
Points will be rewarded.
Regards,
Bruce.Hi Bruce,
I have emailed you some documents for Adobe forms development in the ABAP workbench.
In addition you can also check the following links.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/0f/128841e8231709e10000000a155106/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/0f/128841e8231709e10000000a155106/frameset.htm</a>
These are sample WebDynpro Examples you will find in se80
WDR_TEST_ADOBE
WDR_TEST_ADOBE_PDF_ONLY
Hope this helps.
Maybe you are looking for
-
LCM not working after 600 level patch
We recently applied 11.1.2.1.600 patch for HSS, workspace and HFM. Since then the LCM is not working. We have a clustered Environment. When I login as a native admin user, LCM works when I use http://server1:28080/interop/index.jsp but not with http:
-
Embed EA into WordPress site.....EdgeSuite no longer works
I'm trying to embed a brief .an preso into my clients' WordPress site. In the past, I'd use the EdgeSuite plugin to assist me with this, but since this latest update, it no longer allows me to use it. Even the plugin author has said as much. So now I
-
Trying to connect a Sony TV via Airport. Is this possible?
-
Not burning 4GB disc to capacity
Any ideas why my discs stop when half full. A 4 GB disc will only burn about 1.2 GB material. It doesn't matter if I am using iDVD or Toast. Tracy
-
Macbook pro late 2013 OSX Yosemite 10.10.3 Hi I have Preference settings App Store enable for all auto updates. Despite that i see every time i open app store i have over 8 updates to install, more over from 1 week ago. I think app store is not auto