Dynamic creation of the viariable

Can I in TS dynamically (API) create any variable (including containers and arrays)?
Solved!
Go to Solution.

Hi,
That is possible.
Just visit this thread: http://forums.ni.com/t5/NI-TestStand/How-to-use-the-TS-API-to-create-Global-Variable-Containers/m-p/...
I have provided an example which creates a variable by using the TS api
Regards
juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Similar Messages

Dynamic creation of the select-options

Hi alll,
I have a requirement in which the user has to check the checkbox fields that he wants to have in the select option. Accordingly the select-option fields will be created.
For eg. if the user checks three fields out of ten & executes the program, then in the selection-screen the three select option will be shown those were checked and the other seven select-options will be invisible.
Please help me in this its urgent.

Nitya,
SELECTION-SCREEN BEGIN OF SCREEN 100 TITLE title.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
PARAMETER:rad1 RADIOBUTTON GROUP rad USER-COMMAND rad1 DEFAULT 'X',
          rad2 RADIOBUTTON GROUP rad .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETER: mtr AS CHECKBOX MODIF ID g3 USER-COMMAND chk1,
           p_matnr TYPE eban-matnr MODIF ID g1,
           sloc AS CHECKBOX MODIF ID g3 USER-COMMAND chk2,
           str_loc TYPE eban-lgort MODIF ID g4.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
SELECT-OPTIONS: matnr1 FOR eban-matnr MODIF ID g2.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN PUSHBUTTON /20(10) name USER-COMMAND UCOM.
SELECTION-SCREEN END OF SCREEN 100.
name = 'FETCH'.
title = 'Test'.
CALL SELECTION-SCREEN '100'.
TYPE-POOLS slis.
AT SELECTION-SCREEN OUTPUT.
IF rad1 = 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'G1' OR screen-group1 = 'G4'.
       screen-active = '1'.
       screen-input = 0.
      ELSEIF screen-group1 = 'G2'.
        screen-active = '0'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ELSEIF rad2 = 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'G1' OR screen-group1 = 'G4' OR screen-group1 = 'G3' OR screen-group1 = 'G5'.
        screen-active = '0'.
      ELSEIF screen-group1 = 'G2'.
        screen-active = '1'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
IF mtr = 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'G1'.
        screen-input = 1 .
      ENDIF.
      MODIFY SCREEN.
   ENDLOOP.
ENDIF.
IF sloc = 'X'.
   LOOP AT SCREEN.
      IF screen-group1 = 'G4'.
        screen-input = 1 .
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
clear sy-ucomm.
iflag = 1.
Hope this may give you some lead.
K.Kiran.

Dynamic Label change the Text depending of the locale

Hi,
I have create a dynamic UI (some InputFields with Labels). The development is in American English. I have create resource name in the xlf-Files. For American English and for German. I set the text of the label by the dynamic creation of the label.
If I try to get the label texts in english I get always the text of the creation one but not the german one. The other texts of the UI-elements are right, which I have translate to german.
It looks like that it is not possible to create UI-Labels for international using.
Any idea.
regards
Gunter

hi Werner,
you try in this pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/wd%20java/wd%20tutorials/internationalization%20of%20web%20dynpro%20applications.pdf
Regards,
vino

Creation of internal table dynamically based on the Date Range entered

Hi SAPgurus,
I have been facing one issue i.e creation of internal table dynamically based on the date range entered in the selection screen. For example the date range I am giving as 06/2006 to 08/2006, it should display the Fieldcatelog dynamically, this part i have completed but the only issue I am facing is to populate the sales data into that fields.
Right now my program is displaying the ALV like this.
Ex:
<b>CSR    District   06/2006 07/2006 08/2006 totals</b>
Shiva      New York                             10.00
Shiva      new york                             30.00
Shiva      new york                             40.00
but it should display like this
<b>CSR    District 06/2006 07/2006 08/2006 totals</b>
Shiva New York 10.00   30.00 40.00
80.00
Please help me in this scenario, how to acheive like this..
Thanks & Regards,
Sivaram Kandula

Hi Sivaram,
             I also got the same requirement . i saw rich and your code whatever you have uploaded.i have created dynamic internal table but i am facing the issue to populating the data to my dynamic internal table.
Sivaram, can you please explain your code after this.
*<dyn_table>
*tab_item.
LOOP AT tab_item.
    ASSIGN COMPONENT 1 OF STRUCTURE <dyn_wa> TO <dyn_table>.
    ASSIGN COMPONENT 2 OF STRUCTURE <dyn_wa> TO <dyn_table>.
*    <dyn_wa> = tab_item-bztxt.
*    <dyn_wa> = tab_item-total.
*    APPEND <dyn_wa> TO <dyn_table>.
**    <dyn_wa> = tab_item-total.
**    ASSIGN tab_item-bezei TO <dyn_wa>.
* APPEND <dyn_table>.
ENDLOOP.
how you are puting the loop at tab_item. but tab_item is already commented.
can you send me the code after that.
i am sending some part of my code.
CALL METHOD cl_alv_table_create=>create_dynamic_table
   EXPORTING
     it_fieldcatalog = gt_fCAT1
   IMPORTING
     ep_table        = new_table.
ASSIGN new_table->* TO <dyn_table>.
   create data new_line like line of <dyn_table>.
   assign new_line->* to <dyn_wa>.
select vbeln
        fkart
        vkorg
        vtweg
        fkdat
        spart
        fksto
        from vbrk
        client specified
        into table gt_vbrk
        where mandt = sy-mandt
        and fkart in ('ZF5','ZFR')
        and vkorg = '1100'
        and vtweg = '20'
        and fkdat in s_fkdat
        and spart = '06'
        and fksto = ' '.
   if gt_vbrk[] is not initial.
select vbeln
          fkimg
          prsdt
          netwr
          matnr
          arktx
          werks
          mwsbp
          from vbrp
          client specified
          into table gt_vbrp
          for all entries in gt_vbrk
          where vbeln = gt_vbrk-vbeln
          and werks in s_werks
          and matnr in s_matnr.
endif.
select mnr ltx spras from t247
into table it_t247
where spras = 'E'.
data: lv_month1 type vbrp-prsdt,
       name1(3) type c,
       s_month type string,
        s_month1 type string,
         s_month2 type string.
*      lv_netwr1 type vbrp-netwr,
*          lv_mwsbp1 type vbrp-mwsbp.
      loop at gt_vbrp into gs_vbrp.
        gs_final2-matnr = gs_vbrp-matnr.
        gs_final2-arktx = gs_vbrp-arktx.
        gs_final2-fkimg = gs_vbrp-fkimg.
       lv_month1 = gs_vbrp-prsdt.
        read table it_t247 into wa_t247 with key mnr = lv_month1+4(2).
        if sy-subrc eq 0.
        name1 = wa_t247-ltx.
        endif.
         concatenate name1
                   lv_month1(4) into s_month SEPARATED BY '_' .
         CONCATENATE S_MONTH 'QTY' INTO S_MONTH1 SEPARATED BY ''.
          CONCATENATE S_MONTH 'VALUE' INTO S_MONTH2 SEPARATED BY ''.
         gs_final2-month = s_month.
          lv_netwr1 = gs_vbrp-netwr.
        lv_mwsbp1 = gs_vbrp-mwsbp.
        gs_final2-MONTH_QTY = S_MONTH1.
        GS_FINAL2-MONTH_VAL = S_MONTH2.
        gs_final2-value = lv_netwr1 + lv_mwsbp1.
       append gs_final2 to gt_final2.
       clear: gs_final2. "lv_name2.
       endloop.
       if gt_final2[] is not initial.
         sort gt_final2 by matnr month ascending .
         loop at gt_final2 into gs_final2.
        gs_final2_01 = gs_final2.
     collect gs_final2_01 into gt_final2_01.
    endloop.
       endif.
   ENDIF..
Regards
Ankur

Dynamic creation of TabStrip

Hi,
I want to create a tabstrip dynamically.The tabstrip should have 3 tabs, and in each of the tabs i want to put some UI elements like a label, input field, dropdown, tables.........etc.
Im able to create the tabstrip and add tabs to it dynamically.
I've even created the UI elements which i wanted to put in the tabs.............But im not able to proceed as i dont know how to add the UI elements to the tabs.......
Can anyone tell me how to add UI elements to a tab in a tabstrip?
Regards,
Padmalatha.K
Points will be rewarded.

Hi,
Following code will help you to understand the dynamic creation and adding them
//Tabstrip
       IWDTabStrip tabStrip = view.createElement(IWDTabStrip.class);
       //Tab
       IWDTab tab = view.createElement(IWDTab.class);
       //Input Field
       IWDInputField inputField = view.createElement(IWDInputField.class);
       //Adding inputfield to tab
       tab.setContent(inputField);
       //Adding tab to tabstrip
       tabStrip.addTab(tab);
//Finally add this tabstip to either your root container or some other container.
Regards
Ayyapparaj

Dynamic Creation of Data Tables and Fields

Hello all. I am currently working with a system that contains a bunch of windows. These windows are divided into two groups that represent their presentation style: Columns (such as a table) and Free (such as in a form). I created two tables in database to describe each and every window. These tables describe the type of presentation style, the fields of each window (title of the field, size of the field, position in window, and many more...)
I did this to make the creation of the windows more effective. In this way that I have, I only have to make one window to display all the thousands of windows that I have in my database because the values of presentation are taken from the description in the tables.
I was able to do this through TextFields and JTables in Swing. But now I run into JSC. Is this possible with JSC? Say in case the presentation style of the window is Column, can I tell the data table to go read the description of the window that needs to be opened to obtain the amount of columns, the column names, the size of each column... then create the tables and present the values?
Or say the presentation style is Free... I need to go find how many fields need to be created and their positions in the form, and then the titles of each field. Any ideas how this can be performed?
Thank you.
Franklin Angulo

>
I was able to do this through TextFields and JTables
in Swing. But now I run into JSC. Is this possible
with JSC? Say in case the presentation style of the
window is Column, can I tell the data table to go
read the description of the window that needs to be
opened to obtain the amount of columns, the column
names, the size of each column... then create the
tables and present the values?
Or say the presentation style is Free... I need to go
find how many fields need to be created and their
positions in the form, and then the titles of each
field. Any ideas how this can be performed?
Creator won't help you with the graphical design, but it's definitely possible to dynamically compose the set of components that are children of a particular component. Doing so leverages the basic component APIs of JSF (javax.faces.component.UIComponent), so you'll want to grab yourself a copy of the JSF Javadocs (or use Creator's lookup facilities as you type your code) to understand what's possible.
The most important detail is that all components have a getChildren() method that returns a java.util.List of the child components for that component (as well as a getParent() to get the parent component). Any manipulation you do on this returned list is reflected in the structure of the overal component tree.
As a simple example, assume you want to add an input text component as a child of the form. You'd do something like this:
HtmlInputText input = new HtmlInputText();
input.setXxx(..); // Set properties as needed
form1.getChildren().add(input); // add new childCraig McClanahan

Dynamic creation of ComponentUsage

Hi people,
I want to reuse a view (ViewA) in different views (ViewB, ViewC, ViewD).ViewA has a quite complex logic, so it is necessary to outsource this view. Not only the logic, but also the count of UIElements and contextelements is quite large, for this I don't want to implement this part redundant in the views A, C and D.
I have to use ViewA in a table in the TablePopin UIElement. Every line of the table should have its own instance of ViewA. Is that possible?
My idea is it, to put the view in an own component. For every tableline I need an instance of the componentUsage. My problem is now, that I'm not able to create at runtime a ComponentUsage and at designtime I don't know how many instances I need. Is it possible in webdynpro to create dynamic instances of ComponentUsage?
If you know an other way, that prevents me from implementing the view and its logic more times, please tell me!
Thanks in advance,
Thomas Morandell

Hi Thomas,
just for clarification. Principally it is possible in Web Dynpro to dynamically create new component usages of the same type like an existing, statically declared one. This means after having defined a component usage of type ISomeComp (component interface definition) you can dynamically create new component usages which all point to the same component interface definition ISomeComp:
wdThis.wdGetISomeCompUsage().createComponentUsageOfSameType();
But this dynamic creation approach implies, that you must also embed the component interface view of this component usage to the view composition dynamically; and this is (unfortunately) quite cumbersome and complicated based on the existing Web Dynpro Java API (it is not yet optimized for a simple dynamic view composition modification.
Additionally, like Valery pointed out, the dynamic creation of new component usages is not compatible with table popins.
Regards, Bertram

Dynamic Creation of UI in adobe forms??

Hi Experts,
I need to create a dynamic interactive form and dynamic UI elements in the interactive form.
As per my requirement I need to display a pdf and I will be getting values from the RFC's. I need to show the form segments and the UI elements only when there's a data from the RFC else not. I am unable to understand whether this requirement needs generation of the UI elements dynamically or I can do it statically as well.
The form thus generated will be having data from the RFC which based on the data quantity may exceed to n number of pages.
In case it needs dynamic creation can you suggest me please how to achive it in interactive forms?
Helpful answers will be appreciated.
Warm Regards,
Gaurav

Hi,
subForm1:-
Flow content
Allow page breaks
Place: following previous-----> This means when you are repeating the subform the previous one should be followed.
Say you have a table and have 3 columns in it.
After 1st column is completed, the next column should come with 1st comun
After: Continue filling parent--->Continously fill the data with the parent element
Repeat sub form min count is 1 : Minimum of 1 line item will be printed
Height: Expand to fit is true.: If the field height is increased it automatically expands.
For help in Adobe Press F1 or Goto Help--> Adobe Designer Help in Adobe Designer
After installing Adobe Designer, goto the specific folder
C:\Program Files\Adobe\Designer 8.0\EN you can get sample documents.
For help press F1 after opening designer.
Sub Form1: Content--> Flowed, Flow direction --> Top to bottom
Binding --> Check the checkbox Repeat Subform for each data item
Subform 2: Content --> Positioned, No pagination No binding settings changes needed.
Hey i forgot to mention the Header Subform where you create all these subforms should be flowed.
Try it once like this and lte us know
Edited by: Sankar Narayana on Oct 3, 2008 5:06 PM

Dynamic creation of date in selection variant

Hi All,
I have a Z program for updating a field in BOM item. One of the input field in the report is "Valid From Date". Actually the current date is automatically fetched through a function module and it is defaulted in that field.
Our client is using selection variant for ease of use. The problem here is old date in the selection variant is replacing the current date. I want current date to be created automatically during insertion of variant also. How can i solve this problem. Is there any selection variable inside the variant for dynamic creation of Date?
Thanks
Sankar

As I know there is no setting for this. For any std or Z report variant function with L should act same way...anyway you discuss with your ADABer.
See the help for variables
Selection Variables
The following three types of selection variables are currently
    supported:
o   Table variables from TVARV
        You should use these variables if you want to store static
        information. TVARV variables are proposed by default.
o   Dynamic date calculations:
        To use these variables, the corresponding selection field must have
        type 'D' (date). If the system has to convert from type T to type D
        when you select the selection variables, the VARIABLE NAME field is
        no longer ready for input. Instead, you can only set values using
        the input help.
        The system currently supports the following dynamic date
        calculations:
        Today's date
       From beginning of the month to today
       Today's date +/- x days
       First quarter ????
       Second quarter ????
       Third quarter ????
       Fourth quarter ????
       Today's date - xxx, today's date + yyy
       Previous month
o   User-specific variables
       Prerequisite: The selection field must have been defined in the
       program using the MEMORY ID pid addition. User-specific values,
       which can be created either from the selection screen or from the
       user maintenance transaction, are placed in the corresponding
       selection fields when the user runs the program.
The SELECTION OPTIONS button is only supported for date variables that
   fill select-options fields with single values.
i.e means we can do that with D also.

Dynamic creation of business graphics.

Hi,
i have a piece of code which dynamically create a business graphics. If i use the same node data and create BG in statically.. i am able to view the graph. In case of dynamic creation , i am getting graphical rendering error. Have i missed something here..
The piece of code i had used is..
     IWDBusinessGraphics bg = (IWDBusinessGraphics)view.createElement(IWDBusinessGraphics.class,null);
          IWDCategory c = (IWDCategory)view.createElement(IWDCategory.class,null);
     //     c.setDescription("tableutility");
          c.bindDescription(wdContext.getNodeInfo().getAttribute(IPrivateSDNUtilityView.IContextElement.TEST));
bg.setCategory(c);
          bg.setDimension(WDBusinessGraphicsDimension.PSEUDO_THREE);
          IWDSimpleSeries ss = (IWDSimpleSeries)view.createElement(IWDSimpleSeries.class,null);
          ss.bindValue(wdContext.nodeDepartments().getNodeInfo().getAttribute(IPrivateSDNUtilityView.IDepartmentsElement.NO_OF_PEOPLE));
          ss.setLabel("Simple Series");
          ss.setLabel("No of People");
          bg.addSeries(ss);
          bg.setChartType(WDBusinessGraphicsType.COLUMNS);
          bg.bindSeriesSource(wdContext.nodeDepartments().getNodeInfo());
          bg.setIgsUrl("http://<hostname>:40080");
Please help.
Regards
Bharathwaj

Please got through following link
<a href="/people/sap.user72/blog/2006/05/04/enhancing-tables-in-webdynpro-java-150-custom-built-table-utilities:///people/sap.user72/blog/2006/05/04/enhancing-tables-in-webdynpro-java-150-custom-built-table-utilities

Dynamic Creation of Buttons and Actions HELP

Hi there,
I have got a problem (or maybe even two) with the dynamic Creation of buttons. The code below creates the buttons.
My main problem is, that the parameter created for the button's action isn't propagated to the assigned event handler. I get a null, though the name of the parameter in the event handler and the name of the parameter added to the action are the same.
Could it also be that I'm always using the same action? I.e. does wdThis.wdGetAddElementAction() always return the same action instance? If yes, how can I create individual actions for each button?
Any help is appreciated!
Cheers,
Heiko
"    for(int i=rootContainer.getChildren().length; i<wdContext.nodeFeature().size();i++)
               IPrivateVCT_Feature.IFeatureElement featureElement = wdContext.nodeFeature().getFeatureElementAt(i);
               IWDTray featureTray = (IWDTray) view.createElement(IWDTray.class, featureElement.getName());
               IWDCaption header = (IWDCaption) view.createElement(IWDCaption.class, featureElement.getName()+"_Header");
               header.setText(featureElement.getName());
               featureTray.setHeader(header);
               featureTray.setExpanded(false);
               rootContainer.addChild(featureTray);
               IWDButton button = (IWDButton) view.createElement(IWDButton.class, featureElement.getName()+"_Button_AddElement");
               IWDAction actionAddElement = wdThis.wdGetAddElementAction();
               actionAddElement.getActionParameters().addParameter("featureIndex", new Integer(i).toString());
               button.setOnAction(actionAddElement);
               button.setText("Add Element");
               featureTray.addChild(button);

Hi Heiko,
You have done everything correctly....except for 1 line
in the code...
Replace the following line in your code:
actionAddElement.getActionParameters().addParameter("featureIndex", new Integer(i).toString());
Replace the above line with this code:
button.mappingOfOnAction().addParameter("featureIndex",i);
Actually in your code, you are not associating the parameter with the button...
Note that addParameter(...) comes with two signatures: addParameter(String param, String value) and addParameter(String param, int value). You can use any of them based on yuor need.
Hope it helps,
Thanks and Regards,
Vishnu Prasad Hegde

Dynamic Creation Form

Hi friends,
Is there a way to create dynamic creation forms in ADF,in jdev 10.3.3?
By this I mean--I need to populate a table in my DB and on my page I have an add button,
now at each click of add button,a new creation form should be displayed on the page one below the other.
finally there would be a Save button that would save all my entries to the table.
I searched a lot for the same...Please do help if anybody has any ideas..
Thnks in Advance..c ya
kavitha
Edited by: user6403440 on May 5, 2009 2:22 AM

Hi,
well, the easiest would be to create an updateable table and add new rows. If you need a form then you can use af:forEach or af:iterator with the table binding to render input form elements (more like a custom table rendering). However, its quite a bit of development that is required for this.
Frank

How to switch off automatic creation of the business partner?

Hello!
Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.

Hi,
I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
1. Set BP Role Category for Direction BP to Customer
Roles: FLCU00 - Business Partner FI Customer (FS: BP)
FLCU01 - Business Partner Customer (FS: BP)
2. Defined the Number assignment for Direction BP to customer
4. Customer account group and numbering is also defined.
3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
Kindly let me know if any customizing I have missed.
Regards
Ameya

How to reference dynamic parameters in the PL/SQL script

The meaning of dynamic parameter is the position and name of parameters will be changed based on the data structure of a referenced text file reading by the concerned PL/SQL script. Anybody can post a sample code will be very appreciated.

The SQL and PL/SQL discussion forum is a good source for this kind of information.
The URL is:
PL/SQL

Using a dynamic variable in the Import command of a Method call

Hi,
I am trying to make a Method call fully dynamic.
I have found out how to make the Method name dynamic, but I am having trouble figuring out how to make the Importing statement dynamic.
in my code below:
      CALL METHOD o_main->(v_call)
        IMPORTING
          it_ekko = i_ekko.
I would like to know if it's possible to make both "it_ekko" AND "i_ekko" dynamic so I can use this same call for various tables.
Hope that makes sense...thanks for your help.
Andy

Hi Andrew,
The method call is fully dynamic; not only the parameters can be specified dynamically but also the method name.
This is a help extract:
DATA: line     TYPE c LENGTH 80,
      text_tab LIKE STANDARD TABLE OF line,
      filename TYPE string,
      filetype TYPE c LENGTH 10,
      fleng    TYPE i.
DATA: meth TYPE string,
      class TYPE string,
      ptab TYPE abap_parmbind_tab,
      ptab_line TYPE abap_parmbind,
      etab TYPE abap_excpbind_tab,
      etab_line TYPE abap_excpbind.
DATA: exc_ref TYPE REF TO cx_sy_dyn_call_error,
      exc_text TYPE string.
class    = 'CL_GUI_FRONTEND_SERVICES'.
meth     = 'GUI_DOWNLOAD'.
filename = 'c:\temp\text.txt'.
filetype = 'ASC'.
ptab_line-name = 'FILENAME'.
ptab_line-kind = cl_abap_objectdescr=>exporting.
GET REFERENCE OF filename INTO ptab_line-value.
INSERT ptab_line INTO TABLE ptab.
ptab_line-name = 'FILETYPE'.
ptab_line-kind = cl_abap_objectdescr=>exporting.
GET REFERENCE OF filetype INTO ptab_line-value.
INSERT ptab_line INTO TABLE ptab.
ptab_line-name = 'DATA_TAB'.
ptab_line-kind = cl_abap_objectdescr=>changing.
GET REFERENCE OF text_tab INTO ptab_line-value.
INSERT ptab_line INTO TABLE ptab.
ptab_line-name = 'FILELENGTH'.
ptab_line-kind = cl_abap_objectdescr=>importing.
GET REFERENCE OF fleng INTO ptab_line-value.
INSERT ptab_line INTO TABLE ptab.
etab_line-name = 'OTHERS'.
etab_line-value = 4.
INSERT etab_line INTO TABLE etab.
TRY.
    CALL METHOD (class)=>(meth)
      PARAMETER-TABLE
        ptab
      EXCEPTION-TABLE
        etab.
    CASE sy-subrc.
      WHEN 1.
    ENDCASE.
CATCH cx_sy_dyn_call_error INTO exc_ref.
    exc_text = exc_ref->get_text( ).
    MESSAGE exc_text TYPE 'I'.
ENDTRY.
BR,
Valentin

Dynamic creation of the viariable

Similar Messages

Maybe you are looking for