Dynamic filling of input fields in a table

Hi,
There are input fields in a two tables these are to be filled parallely at run time. the no of entries depend on the entires in internal table.
If internal table has more entries, then a certain entries is filled up; say 9 times the control should be given to a new tables and the remaining entries should be filled in the input fields of other table .
I appreciate help.

Hi,
Actually there is two HTML tables, each table has nine rows. if the no of entries in the internal table exceeds nine then the second table should be filled after the first HTML table has filled with all the nine entries.
Both tables contains same input fields. How to fill both tables dynamically. I think now it makes sense.

Similar Messages

  • Dynamic enabling of input fields via radio btn in report selection screen?

    Hi there!
    I was wondering whether one can dynamically enable/disable input fields on a selection screen of a report-program.
    Or is this only possible for selection screens in dynpro-programs?
    If possible for reports - could you give an example?
    Thanx a lot.
    Andreas

    Hi,
    yes..You can dynamically disable and enable inputs fields in the selection screen..
    Check this ex..If you press the first radio button..The second input will be disabled...And vice versa..
    PARAMETERS: p_r1 RADIOBUTTON GROUP g1 USER-COMMAND usr DEFAULT 'X',
    p_r2 RADIOBUTTON GROUP g1.
    PARAMETERS: p_input1 TYPE matnr MODIF ID m1,
    p_input2 TYPE matnr MODIF ID m2.
    AT SELECTION-SCREEN OUTPUT.
    LOOP AT SCREEN.
    IF p_r1 = 'X'.
    IF screen-group1 = 'M2'.
    screen-input = '0'.
    ENDIF.
    ELSE.
    IF screen-group1 = 'M1'.
    screen-input = '0'.
    ENDIF.
    ENDIF.
    MODIFY SCREEN.
    ENDLOOP.
    Thanks,
    Naren

  • Dynamic output & input fields in the table control

    HI Guys,
    How can one change the attribute of  input field to output field basically greying of field) dynamically
    based on the some flag. Loop at screen does not work. I need to change the attributes
    of field 'outfiled' and output field display only'.
    Any help is highly appreciated.
    Regards,
    Harsha

    Hi Harsha,
    I generated a table control (ERP 6.2) and somewhere I found the coding like this (the name of the table control is TABLE_CONTROL):
    *&spwizard: output module for tc 'TABLE_CONTROL'. do not change this lin
    *&spwizard: get lines of tablecontrol
    module TABLE_CONTROL_get_lines output.
      g_TABLE_CONTROL_lines = sy-loopc.
    If I do a loop at the screen at this place, I can control the individual input/output for the screen fields (the table fields). In my work area (WA_CONTROL) I can see the actual value of fields. Depending on this, I choose to enable/disable input via:
    loop at screen.
    if wa_control-material <> ' '.
    screen-input = '0'.
    modify screen.
    endif.
    endloop.

  • How to link label with an input field in data table?

    I am curious if there is a nice way to link a label to input field in a data table directly in JSP? Data filling the table are dynamically bounded.
    Sample, simplified code below. Values of "label" property are unique in the collection binded to dataTable.
    <?xml version="1.0" encoding="UTF-8"?>
    <jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core"
         xmlns:h="http://java.sun.com/jsf/html"
         xmlns:jsp="http://java.sun.com/JSP/Page">
         <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8" />
         <f:view>
              <html>
              <body>
              <h:dataTable value="#{screen$monitoring$errorlog$CorrectHopper.dataset}" var="DATA_ROW">
                   <h:column>
                        <f:facet name="header">
                             <h:outputText value="Name" />
                        </f:facet>
                        <h:outputLabel value="#{DATA_ROW.label}" for="#{DATA_ROW.label}_id" />
                   </h:column>
                   <h:column>
                        <f:facet name="header">
                             <h:outputText value="Value" />
                        </f:facet>
                        <h:inputText value="#{DATA_ROW.label}" id="#{DATA_ROW.label}_id" />
                   </h:column>
              </h:dataTable>
              </body>
              </html>
         </f:view>
    </jsp:root>
    returns:
    17:39:01,390 ERROR [[jsp]] Servlet.service() for servlet jsp threw exception
    java.lang.IllegalArgumentException: #{DATA_ROW.label}_id
    what is related to EL expression in h:inputText's "id" attribute.
    Is there any other way to bind label with dynamically created input field in JSP? Do I really have to bind input field directly to component objects with "binding" and set IDs manually with setId() (what is ugly solution because it moves View related logic to Model layer)?

    I've thought of using EL because I have to somehow
    link a label to an input field dynamically. Somehow? Dynamically? Just use plain text :)Well... just look at my code snippet (notice: we want to join the pairs of labels and text boxes placed in a datatable [or any other repeater-like component rendering properties of objects from a collection]):
    <h:dataTable value="#{screen$monitoring$errorlog$CorrectHopper.dataset}" var="DATA_ROW">
    <h:column>
    <f:facet name="header">
    <h:outputText value="Name" />
    </f:facet>
    <h:outputLabel value="#{DATA_ROW.label}" for="#{DATA_ROW.label}_id" />
    </h:column>
    <h:column>
    <f:facet name="header">
    <h:outputText value="Value" />
    </f:facet>
    <h:inputText value="#{DATA_ROW.label}" id="#{DATA_ROW.label}_id" />
    </h:column>
    </h:dataTable>
    and what is your idea of using plain text as "id" attribute value in this case? :)
    Regards,
    Michal

  • Input field in a table view control

    Hi,
        I have a table view control, with input field in one of the columns.
        That is meant for entering some values.
        My problem is when i am entering a 3 input field with value and then by   using     mouse control i enter say 20th input field with value.  After that when i use the directional keys to enter the 21st field, the cursor is not in 21st field, it is somewhere else.
    How to correct this problem.
    Regards,
    Vijayalakshmi

    Hi,
    Try to use the TABINDEX property of <input>.
    Best regards,
    Guillaume

  • How to get the value from the Input field of the Table view.

    Hi Experts,
    I have created a table view with 10 rows and each rows contains input fields in it.Can you please help me getting the values that are entered in all 10 rows.
    Currently I am using the below code,but using the below I am able to get only the first row details of the table.
      lo_el_table->get_static_attributes(
        IMPORTING
          static_attributes = ls_table).
    Please let me know you suggestions on this.Thanks in advance.
    Regards,
    Arun

    Hi Arun,
    You should use this method:
    lo_nd_table->get_static_attributes_table(
    IMPORTING
    table = lt_table).
    Cheers,
    Roelof
    http://www.nl4b.com

  • Error in validation an input field in a table ui and high lighting the cell

    Hello All,
    I have a table ui in one of my application.   This table has, say 6 columns; out of these 6 columns 4 columns are shown as input fields.  User needs to put in some numbers in two of the fields.  I need to capture these two number fields data and subtract one from the other.  If number is negative , I need to let the user know by error message that the number is negative and they need to fix their input to make the answer positive.  I am able to do all this, but I am not able to high light the corresponding field which needs to be fixed.  Is there anyway I can do that...I mean high light the particular field as one gets it when we use the "report attribute error message" method of message manager class. 
    Secondly I can not halt the application, I need to do some work around for that using some flags.  Is there a simple way to halt the application, other than using flags and if condition?  I searched this forum, but could not find any definite answer....
    Thanks very much!
    Any help would greatly be appreicated.

    Hi....
    First you should have the table values in an internal  table.... for that yo need to get the values from the context like this....
    *DECLARE INTERNAL TABLE AND WORKAREA.
    data ls_nd_stru type wd_this->element_<node name>
    data lt_nd_table type wd_this->elements_<node name>
    get all declared attributes
    lo_nd_<your context node>->get_static_attributes_table(
                                               importing
                                               table = lt_nd_table ).
    *now your lt_nd_table will have the values.....what ever you have in the table.
    *then
    loop at lt_nd_table into ls_nd_stru.
    <.....your logic.....>
    <ie., read the current line of the field like
    ls_nd_stru-<field name1> = ls_nd_stru-<field name2> - ls_nd_stru-<field name3>
    then check error msg... based on your postive or negative values
    endloop.
    Hope this will help you....
    Thanks & regards
    Raja

  • Fill automatically Custom fields in a table

    Hi all,
        I have a custom table and many se38 reports or Bapi which modify or insert records in this table.
    Now from se11 I must add 4 new fields to this table that have to contain system values.
    Can I write a routine which automatically fills these new fields when an insert or modify command runs on this table?
    Best Regards,
    Raffaele

    I tried to use this event but it runs only when I modify table data from SM30 transaction. But are you sure that this event runs also when a Bapi or an exeecutable program runs?
    thanks

  • Dynamically  Visibilty of Input Field in Interactive PDF Form

    Hi All,
    I want to bind the visibilty of Input Field dynamically in an Interactive PDF Form. How can I do ?
    Please give me some solution
    Regards
    Manish

    Manish,
    Well select the inputfield & check the Scripting Window in your Designer.
    On its top, you will see an option something as Show: Events with Scripts.
    Select the initialize event and insert the code she mentioned. Then click on + sign. This will enter your changes.
    There will be language option on top as well. Select JavaScript from it.
    So in the end your code should read something like this.
    ----- data.<YourFormName>.txtInput::initialize: - (JavaScript, client) ----------------------------------
    txtInput.presence = "invisible";
    Chintan

  • Please Help. How to access to an input field in a table with javascript

    Hi
    i�m trying to access to the content of an input field that is in an table with a javascript function in this way
    function Valida_Tabla()
    var centro = document.getElementById("form1:idcentro").value;
    alert("Centro es ["+centro+"]")
    var des = document.getElementById("form1:table1:0:textField2").value;
    alert("des ["+des+"]")
    The fisrt alert is ok and displays the value of a field that is in a table.
    The second alert is not displayed.
    Is the syntax wrong?
    what i�m doing wrong
    Please help

    The best bet is to look at the source of the generated HTML and then use the exactly generated ID in the HTML source. When I looked at the HTML source I see the ID of a textfied inside a table as
    form1:table1:tableRowGroup1:0:tableColumn1:textField1
    - Winston
    http://blogs.sun.com/roller/page/winston?catname=Creator

  • Dynamic Creation of input fields

    Dear Guys,
    I have a node name 'NodeA' with 10 attributes(a,b,c,d..j) in it.
    When the add button is clicked , I want to display 10 inputfield for the 10 attributes of 'NODEA' to be dynamically created and displayed. so what coding should be written in the add buttons action....
    Regards,
    Shamila

    Hi Shamila,
    I have a context node by name NODE & it has 10 attributes like NODE_1, NODE_2,... NODE_10 under it. All these attributes are of type STRING. So you just have to put the below code into WDDOMODIFYVIEW to get 10 input fields & labels displayed. These input fields would show any string that you have maintained for each attribute using the "Default Value" property.
    METHOD wddomodifyview .
      DATA :  lr_container TYPE REF TO cl_wd_uielement_container,
            lr_input_field TYPE REF TO cl_wd_input_field,
              lr_label TYPE REF TO cl_wd_label,
            lv_attribute_name TYPE string,
            lv_id TYPE string,
              lv_label_text TYPE string.
      CHECK first_time = abap_true.
      lr_container ?= view->get_root_element( ).
      cl_wd_matrix_layout=>new_matrix_layout( container = lr_container ).
      lr_container->set_width( value = '50%' ).
      DO 10 TIMES.
        MOVE sy-index TO: lv_attribute_name,
                      lv_id,
                          lv_label_text.
    " Figuring out the context attribute name to bind to the input field
    " Since the node name is NODE & attributes are like ATTR_1, ATTR_2..
    " The value to be bound would be like NODE.ATTR_1, NODE.ATTR_2....
    "  Am condensing the string finally to avoid any gaps in between coz it would lead to shortdump
        CONCATENATE 'NODE.ATTR_'
                 lv_attribute_name INTO lv_attribute_name.
        CONDENSE lv_attribute_name NO-GAPS.            
    " Figuring out a unique id to be used for assigning to the input fields
    " Am assigning id's with values like IO_1, IO_2, ... IO_10
    "  Am condensing the string finally to avoid any gaps in between coz it would lead to shortdump
        CONCATENATE 'IO_'
                 lv_id INTO lv_id.
        CONDENSE lv_id NO-GAPS.
    " Figuring out a unique text to be used for assigning to the label fields
    " Am assigning text to labels like Label_1, Label_2, .. Label_10
    "  Am condensing the string finally to avoid any gaps in between coz it would lead to shortdump
        CONCATENATE 'Label_'
                    lv_label_text INTO lv_label_text.
        CONDENSE lv_label_text NO-GAPS.
        lr_input_field =   cl_wd_input_field=>new_input_field( id          = lv_id
                                               bind_value = lv_attribute_name ).
        lr_label = cl_wd_label=>new_label(  label_for  = lv_id
                                            text       = lv_label_text ).
        cl_wd_matrix_head_data=>new_matrix_head_data( element = lr_label ).
        cl_wd_matrix_data=>new_matrix_data( element = lr_input_field ).
        lr_container->add_child( the_child = lr_label ).
        lr_container->add_child( the_child = lr_input_field ).
        CLEAR: lv_attribute_name,
               lv_id,
               lv_label_text.
      ENDDO.
    ENDMETHOD.
    Regards,
    Uday

  • Flash Pro CC  dynamically create an input field problems?

    I dynamically created an input TextField and designated a TextFormat object that is a Thai Font. The difficulty I have is the superscript above the Thai letters will not display. These tone marks are cut off by the uppermost dimension of the field.
    The following is an example of the problem   "   นี้  "
    The tone mark "  ้  "does not display
    If there are multiple lines the tone marks are obscured by the line above.
    I have fooled around with carriage returns and RegExp as a work around but this is torture.
    Any ideas?
    thanks

    Thank you Rob for your help. The  leading property will add whatever space I require between lines. So  the response was helpful there. However it does not apply to the first line.I have worked around this by adding a  carriage return as the initial line of text. This is working for me

  • Digital Signature Turns Invalid while setting the Property Dynamically to an Input Field

    I have an Input box that turns mandatory only if a check box is clicked.
    The Script goes Something Like This;
    if(chkbox.rawValue === 1){
         inputField.mandatory = "error";
         inputField.mandatoryMessage = "This Field cannot be left Blank";
         inputField.presence = "visible";
    } else {
         inputField.mandatory = "disabled";
         inputField.mandatoryMessage = "";
         inputField.presence = "hidden";
    I am working with Assembler Service and the Signature field is placed in the cover page after which this form is attached.
    Any clue of why the property change Invalidates the Signature?
    Note: The stand alone form where the Check box and Input field is present doesnot have a preSign event as this form doesnot contain a Signature field unless its merged using assembler. This Script is added to the Click Event of the Checkbox.
    Cheers
    Mahesh Krishnan

    weblogic.common.resourcepool.ResourceDisabledException: Pool mds-soa is Suspended, cannot allocate resources to applications ..Check server logs to find out why mds-soa is suspended. Make sure that datasource mds-soa is up and running on SOA servrs before deploying an application.
    Regards,
    Anuj

  • Dynamically fill primary key from a second table

    Hi,
    IDOC-JDBC
    during runtime, the primary_key of the table must be filled dynamically.
    something like,
    it should go to a table dyn_key and get the hightest value of the field there and add one to it and pass it to dyn_key
    any idea how do i do it?
    regards,
    nikhil.

    Hello Nikhil,
    You can use JDBC look up for retrieving the current Primary key value.....
    Regards
    Ashwin M

  • How to get the values from the input field of a table

    Hello Friends
    I am having table having one column as InputField and rest are the textview fields
    I input the data and click the button that will add them to a node.
    But what is happening is it is adding the current value to all the fields replacing other filelds.
    Like suppose I am having 3 rows
    In column I input 10
    In column 2 input 20
    In column 3 input 30
    Now it is setting the value 30 to all the 3 fields.
    Can any one tell me the code to set 10, 20 and 30 as different value in a node as entered by me.
    Thanks

    Hi
    i am your scernario as follows
    Context
    TN_node (value node of cardinality 0:N)
                 val1 (value attribute under value node)
                 val2 (value attribute under value node)          
    i have binded Tn_node to table and val1 is textview and val2 is inputfield
    public void wdDoInit()
        //@@begin wdDoInit()
        for(int i=0;i<5;i++)
        IPrivateTestView.ITN_nodeElement ele=wdContext.nodeTN_node().createTN_nodeElement();
        wdContext.nodeTN_node().addElement(ele);
        ele.setVa1("val"+i);
        //@@end
    i have a button go in which printing all the values
    public void onActionGo(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
        //@@begin onActionGo(ServerEvent)
        for(int j=0;j<wdContext.nodeTN_node().size();j++)
        //IPrivateTestView.ITN_nodeElement
        IPrivateTestView.ITN_nodeElement ele=wdContext.nodeTN_node().getTN_nodeElementAt(j);
    wdComponentAPI.getMessageManager().reportSuccess("-----"+ele.getVa1());
    wdComponentAPI.getMessageManager().reportSuccess("-----"+ele.getVa2());
    Hope this helps,
    If your problem is not solved please post your code like this
    Thanks and Regards,
    Arun

Maybe you are looking for