Dynamic Naming of field in SAPscript

Hi There, 
I have a SAPscript where I will print a Graphic, I want to print an image of a material, but I could have different materials (hence different images) each time the SAPscript is run - is there any way I can use a dynamic name in the
BITMAP ZIMAGE OBJECT GRAPHICS ID BMAP TYPE BMON command in the SAPscript (a little like the <FS> field symbol in ABAP)
Any suggestions how this can be coded.
Thanks..

Hi
Yes,
You can keep the same Name of the Object in Script, no need to change always.
Only thing is for every new material you have to generate a tiff file and have to save with the same OBJECT name by overwriting the previous object..
Reward points for useful Answers
Regards
Anji

Similar Messages

  • Dynamic naming for screen fields possible?

    Hi.
    I am trying to loop through some screen fields, and hence need to dynamically name the fields. I use the following codes, but it gave me an error:
    IF MAND_CHECK = 'X' AND (TXT_FILE) IS INITIAL.
    "TXT_FILE is a variable that contains the name of the screen field.
    SET CURSOR FIELD TXT_FILE.
    "TXT_FILE is a variable that contains the name of the screen field.
    ENDIF.
    Error: Fehlerhafter logischer Ausdruck "(TXT_FILE)": Nach "(".......

    Do the following:
    field-symbols: <fs> type any.
    assign txt_file to <fs>.
    if mand_check eq 'X' and <fs> is initial.
    Regards,
    Michael

  • Sum for Dynamic Fields in a Dynamic Table with Field Symbol

    Hi All,
    I currently have an report which I am looking to update with some totals.  The information is currently output in an ALV which is fed data from a dynamic table defined with a field symbol.  The modification that needs to be applied is a summation per currency code where each of the fields to be summed is a dynamically named field at runtime.  I am now just looking to see if anyone has any recommendations on how to obtain these totals it would be appreciated.  I have no problem doing the leg work in piecing the solution together but am just stuck on which approach I should be investigating here.  I have looked into several options but do to the fact that the totals are for dynamic fields in a dynamic table and it is a field symbol I am having some difficulties thinking of the easiest approach to obtain these totals.
    Below is a simple sample of what the report currently looks like and what we are looking to add.
    ====================================================================================
    As-Is Report:
    DETAILED DATA ALV
    Company Code  |  Plant  |  2006 Total  |  2007 Total  |  2008 Total |  CURRENCY
    0001          |   ABCD  |    1,500     |    1,200     |    1,700    |    USD
    0001          |   BCDE   |    2,300     |    4,100     |    3,600    |    GBP
    0003          |   DBCA  |    3,200     |    1,600     |    6,200    |    USD
    Addition 1:
    TOTALS PER CURRENCY
    Currency                |  2006 Total  |  2007 Total  |  2008 Total |
    USD              |    4,700     |    2,800     |    7,900    |
    GBP                       |    2,300     |    4,100     |    3,600    |
    Addition 2:
    CONVERSIONS TO USD
                                          |  2006 Curr   |  2006 USD    |  2008 Curr   |  2006 USD   |
    USD                       |  4,700 USD   |  4,700 USD   |  7,900 USD  |  7,900 USD  |
    GBP   (1.5GBP/1 USD)    |  2,300 GBP   |  1,150 USD   |  2,300 GBP  |  1,800 USD  |
    ====================================================================================
    Any recommendations will be appreciated.

    Hi,
    We cannot use the key word SUM in the loop at assigning statement.
    The way i see is
    When  you are creating the first dynamic internal table , create one more with  the structure below:
    Currency | 2006 Total | 2007 Total | 2008 Total |
    Then while populating the data into first itab,also move the contents to the second itab using collect statement.

  • How to get the co-ordinates of a dynamically created input field

    Hello Frn's
    i have created a dynamic text view . but this text view is not appearing at proper position . I want palce it infront of a dynamically created input field . how can i do this ?
    as i am thinking ...i should first of all  get info about the co-ordinates of   dynamaclly creatd input field . and with respect to these co-ordinates ...set the position of  text View .
    Please suggest  your thoughts .
    Thanks and Regards
    Priyank Dixit

    Hi,
    There is no provision in WD for getting screen coordinates and then placing the UI element.
    You to add the UI element to layout editor and based on the layout type it will add the UI element to respective position.
    I would advice not to create dynamic UI elements( instead you can create them statically and then play with visibility status through context binding ). This will be more effective way and less error prone. This is also recommended practice.
    still,For dynamic creation you can refer to following wiki:
    http://wiki.sdn.sap.com/wiki/display/WDABAP/CreatingUIElementsDynamicallyinAbapWebdynpro+Application
    regards
    Manas Dua

  • How to get total of any field in sapscript?

    Hello ,
    i m making sapscript...
    How to get total of any field in sapscript?

    Hi
    Yes, you can define a variabe in your print program and pass it to the SAPScript.
    LIKE:
    Define L_SUM in the Global data.
    DATA: L_SUM TYPE BSEG-DMBTR.
    LOOP AT ITAB.
    L_SUM = L_SUM + ITAB-AMOUNT.
    ENDLOOP.
    CALL FUNCTION 'WRITE_FORM'
    WINDOW = 'MAIN'
    ELEMENT = 'TOTAL'.
    Now, in your SAPScript, create a text element in MAIN window
    /E TOTAL
    Total,, &L_SUM&.
    Go through below link
    http://sap-img.com/sapscripts/sapscript-how-to-calculate-totals-and-subtotals.htm
    Regards,
    Chandru

  • Accessing Dynamic Internal table fields

    Hello All,
    I have one internal table ep_tabx having 138 columns whose data is getting displayed
    by using function module reuse_alv_grid_display.
    Now my query is, i have created one custom button on the appl toolbar to download ep_tabx data.
    IF the user changes the the layout of the output at runtime and then presses that custom button
    then i have created one dynamic internal table using call method cl_alv_table_create=>create_dynamic_table suppose <dyn_table> whose struc will be that of
    dynamic fieldcatalog returned by using FM REUSE_ALV_GRID_LAYOUT_INFO_GET.
    And then I have put a loop on the int table ep_tabx and move corresponding to the int table
    <dyn_table>. But when i download the <dyn_table> data through GUI_DOWNLOAD the
    date fields data is not getting downloaded correctly. I have 4 date fields in my ep_tabx.
    In the alv grid output the date is getting displayed like 08/30/2004(ie mon/date/yr) but in download
    file it comes like 20040830(ie yr/mon/date and that too without /).How to access the dynamic
    internal tables fields separately so asto convert them in the pgm before the download.
    Kindly Help.
    Thanks in advance.
    Mansi

    Hi,
    Search in SDN you would get loads of info on accessing dynamic itab's .
    in order to convert your date format use WRITE stmt to convert the value in your itab before passing it to download FM.
    Regards,
    Raghavendra

  • Need Help in Field Symbol for Dynamically passing  table field value

    Hi All,
    In my internal table I am having data.
    I am dynamically forming table field name and substitute for the another table field name to pass DATA.
    but I am getting the Variable name insted of Value ie Data.
    I am using Field Symbol for this.
    data:
    Field-symbols <TS> type any.
    field1 type string.
    LOOP AT TABLEFIELDS INTO WA_TABLEFIELDS.
                READ TABLE  TEST  WITH KEY NAME = WA_TABLEFIELDS-FIELDNAME.
                IF SY-SUBRC = 0.
                  CONCATENATE 'WA_' WA_TABLEFIELDS-TABNAME '-' WA_TABLEFIELDS-FIELDNAME INTO  Field1.
                  Assign Field1 to <TS>.
                    ALL_VAL-VALUE = <TS>
    "After substituting the <TS>  into ALL_VAL-VALUE  field I need a DATA to be passed but the variable name is appending"*    
             APPEND ALL_VAL.
                ENDIF.
              ENDLOOP.
    kindly how to pass the value into the table.
    Thanks in advance.
    San

    Hi,
    pls assign a break point in
    CONCATENATE 'WA_' WA_TABLEFIELDS-TABNAME '-' WA_TABLEFIELDS-FIELDNAME INTO Field1.
    Assign Field1 to <TS>.
    ALL_VAL-VALUE = <TS>
       " Put a break point here and check for the value in <TS>.
    if <TS> contains value then create a work area for ALL_VAL AND PASS the Field-Symbol to that and then  append thw wa into the table...
    Hope this works out!!
    thanks

  • Coloring of Particular Cells in a dynamic internal table(field symbols)

    Hi,
         I have a requirement to introduce color into some particular cells in a dynamic internal table(Field symbol) based on some conditions.I know that color can be introduced at cell level in the case of static internal table.But, can anybody tell me whether it is possible to introduce color to particular cells in the dynamic internal table(Field Symbol) .Please suggest me on this issue.
    Thanks in advance,
    Rajesh

    Hi,
    This is the sample coding for the colour cell report.
    Kindly go through it. It will helps u.
    REPORT YMS_COLOURTEST .
    DATA: BEGIN OF TP OCCURS 10, ID, NR(8), TEXT(255), END OF TP.
    DATA: LENGTH TYPE I VALUE 8, " Length of list
    TESTSTRING(15) TYPE C VALUE '012345678901234',
    WIDTH TYPE I. " Width of list
    DATA: TXT_REPORT LIKE DOKHL-OBJECT.
    START-OF-SELECTION.
    PERFORM HEADING.
    PERFORM OUTPUT_BODY.
    FORM HEADING.
    FORMAT INTENSIFIED OFF. " Remove any INTENSIFIED
    ULINE AT (WIDTH). " Upper frame border
    FORMAT COLOR COL_HEADING INTENSIFIED." Title color
    WRITE: / SY-VLINE. " Left border
    WRITE: 'No |Colour |intensified |intensified off|',
    'inverse' NO-GAP.
    WRITE: AT WIDTH SY-VLINE. " Right border
    ULINE AT (WIDTH). " Line below titles
    FORMAT COLOR OFF.
    ENDFORM.
    FORM OUTPUT_BODY.
    DO LENGTH TIMES.
    PERFORM WRITE_LINE USING SY-INDEX.
    ENDDO.
    ENDFORM.
    FORM WRITE_LINE USING COUNT TYPE I.
    DATA: HELP(14) TYPE C,
    COUNT1 TYPE I.
    COUNT1 = SY-INDEX - 1.
    WRITE: / SY-VLINE NO-GAP.
    WRITE: (4) COUNT1 COLOR COL_KEY INTENSIFIED NO-GAP.
    WRITE: SY-VLINE NO-GAP.
    CASE COUNT1.
    WHEN '0'.
    HELP = 'COL_BACKGROUND'.
    WHEN '1'.
    HELP = 'COL_HEADING'.
    WHEN '2'.
    HELP = 'COL_NORMAL'.
    WHEN '3'.
    HELP = 'COL_TOTAL'.
    WHEN '4'.
    HELP = 'COL_KEY'.
    WHEN '5'.
    HELP = 'COL_POSITIVE'.
    WHEN '6'.
    HELP = 'COL_NEGATIVE'.
    WHEN '7'.
    HELP = 'COL_GROUP'.
    ENDCASE.
    WRITE: HELP COLOR COL_KEY INTENSIFIED NO-GAP.
    WRITE: SY-VLINE NO-GAP.
    WRITE: TESTSTRING COLOR = COUNT1 INTENSIFIED NO-GAP.
    WRITE: SY-VLINE NO-GAP.
    WRITE: TESTSTRING COLOR = COUNT1 INTENSIFIED OFF NO-GAP.
    WRITE: SY-VLINE NO-GAP.
    WRITE: TESTSTRING COLOR = COUNT1 INVERSE NO-GAP.
    WRITE AT WIDTH SY-VLINE NO-GAP.
    ENDFORM.
    Thanks,
    Shankar

  • Dynamic assign in field symbols

    dynamic assign in field symbols

    Hi,
    DYNAMIC ASSIGN:
    If you do not know the name of the field that you want to assign to the field symbol when you write a program, you can use a dynamic ASSIGN statement:
    ASSIGN (<f>) TO <FS>.
    This statement assigns the field whose name is contained in the field <f> to the field symbol <FS>. You cannot use offset and length in a dynamic ASSIGN.
    At runtime, the system searches for the corresponding data object in the following order:
    If the ASSIGN statement is in a procedure, the system searches first in its local data.
    If it cannot find the object in the local data (or if the ASSIGN statement is not in a procedure), it then looks in the local data of the program.
    If the field does not exist in the global data of the program, the system looks in the table work areas declared with the TABLES statement in the main program of the current program group. A program group consists of a main program and all of the programs that are loaded into the same internal session as a result of other program calls.
    If the search is successful and a field can be assigned to the field symbol, SY-SUBRC is set to 0. Otherwise, it is set to 4, and the field symbol remains unchanged. For security reasons, you should always check the value of SY-SUBRC after a dynamic ASSIGN to prevent the field symbol pointing to the wrong area.
    Searching for the field in this way slows down the program. You should therefore only use the dynamic ASSIGN statement when absolutely necessary. If you know when you create the program that you want to assign a table work area to the field symbol, you can also use the following variant of the dynamic ASSIGN statement:
    ASSIGN TABLE FIELD (<f>) TO <FS>.
    The system then only searches within the table work areas in the main program of the current program group for the data object that is to be assigned to the field symbol. This addition is forbidden in ABAP Objects, since the latter does not support table work areas.
    Suppose we have three programs. The main program:
    REPORT demo_field_symbols_dynami_as_1.
    TABLES sbook.
    sbook-fldate = sy-datum.
    PERFORM form1 IN PROGRAM demo_form1.
    The other two programs are:
    REPORT demo_form1.
    FORM form1.
      PERFORM form2 IN PROGRAM demo_form2.
    ENDFORM.
    and
    REPORT demo_form2.
    FORM form2.
      DATA name(20) TYPE c VALUE 'SBOOK-FLDATE'.
    FIELD-SYMBOLS <fs> TYPE ANY.
      ASSIGN (name) TO <fs>.
      IF sy-subrc EQ 0.
        WRITE / <fs>.
    ENDIF.
    ENDFORM.
    The output looks something like this:
    02.06.1998
    The program group in the internal session now consists of the programs DEMO, MYFORMS1 and MYFORMS2. The field symbol <FS> is defined in MYFORMS2. After the dynamic ASSIGN statement, it points to the component FLDATE of the table work area SBOOK declared in the main program DEMO.
    REPORT demo_field_symbols_dynami_as_2 .
    TABLES sbook.
    DATA: name1(20) TYPE c VALUE 'SBOOK-FLDATE',
          name2(20) TYPE c VALUE 'NAME1'.
    FIELD-SYMBOLS <fs> TYPE ANY.
    ASSIGN TABLE FIELD (name1) TO <fs>.
    WRITE: / 'SY-SUBRC:', sy-subrc.
    ASSIGN TABLE FIELD (name2) TO <fs>.
    WRITE: / 'SY-SUBRC:', sy-subrc.
    The output is:
    SY-SUBRC:      0
    SY-SUBRC:      4
    In the first ASSIGN statement, the system finds the component FLDATE of the table work area SBOOK and SY-SUBRC is set to 0. In the second ASSIGN statement, the system does not find the field NAME1 because it is declared by the DATA statement and not by the TABLES statement. In this case, SY-SUBRC is set to 4.
    Reference: http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb38d5358411d1829f0000e829fbfe/content.htm
    reward points if helpful.
    Regards,
    Ramya

  • How to delete Dynamically created input field UI Element

    Hi all,
              I want to delete dynamically created input field and label.
    Is there any method please tell.
    Thanks in advance
    Hemalatha

    Hi,
    In the WDEVENT parameter of the action handler you can find the event id.
    ***Variables
      DATA:
        lv_selected  type string.          "Selected tab value
    ***Structure and internal table for the Events and messages
      DATA:
        lt_events type WDR_EVENT_PARAMETER_LIST,
        ls_events type WDR_EVENT_PARAMETER.
    ***Field symbols
      field-symbols: <fs_value> type any.   "Attribute value in events table
    ***Move the event table to lt_events
      lt_events = wdevent->parameters.
      read table  lt_events into ls_events with key name = 'SAVE'.  "Button Id
      if sy-subrc eq 0.
        assign ls_events-value->* to <fs_value>.
        if sy-subrc eq 0.
          lv_selected  = <fs_value>.
        endif.                 "IF sy-subrc eq 0.
      endif.                 "IF sy-subrc eq 0.
    Regards,
    Lekha.

  • Validate Dynamically Generated Form Fields

    Hello, I am having difficulty in validating some text boxes I dynamically generated using javascript.
    I have done the below which is not working..... giving errors of undefined or is null
    var i=rowNum;//value of the integer giving the form field a unique name
    var thefield =(eval(document.getElementById('xxxx_'+i).value));
    if (thefield =="")
    alert("xxxxxxxxxxxxx");
    This is not working. Any one has example of validating dynamically generated form fields?

    Check out jquery and the validation plug-in by Jörn Zaefferer: http://plugins.jquery.com/project/validate
    It'll simplify your life!

  • How to dynamically hide the Field Label in the overview page's form view?

    Hi Experts,
    How to dynamically hide, for certain condition, the Field Label in the overview page's form view?
    Please reply me.
    Regards,
    Vishal

    Hi Vishal,
    It is not possible to dynamically hide/display fields if the UI is build using configurations.
    The work around is to have multiple configurations, and based on the condition, load the
    corresponding configuration at runtime.
    The other approach is to code the complete htm view(htm coding) without using the configuration provided by the framework.
    Regards,
    Leon

  • How we create dynamic add form field in web form

    How we create dynamic add form field in web form?

    Hi,
    Thanks for reply.
    I need to create a form in which "add more" input field dynamically. For
    example sometime we need field on or more. Please look at the demo, I need
    to create form as per demo in business catalyst:
    http://www.openjs.com/scripts/examples/addfield.php

  • How can I dynamically change group field column?

    Hello!
    I need to group data and create group totals for that table. Is
    it possible to dynamically change group field column for
    specific table, depending on data retreived from parameter form?
    Thanks,
    Mario.

    quote:
    Originally posted by:
    ljonny18
    Hi,
    I am using a grid within a component in my Flex application.
    I have an XML dataProvider, and I want to change the row
    colour of my Grid depending on a value coming form my dataProvider
    – but I cant seem to get this to work :(
    can anyone help / advise me on how I can dynamically change the
    colour of my grid row depending on a value coming from my XML
    DataProvider????
    Thanks,
    Jon.
    Hi,
    a few hours ago I stumbled across this cookbook entry - it
    didn't solve MY problem, but maybe it provides a way to solve your
    problem?
    http://www.adobe.com/cfusion/communityengine/index.cfm?event=showdetails&postId=61&product Id=2&loc=en_US
    From the article:
    quote:
    Changing the background color of a DataGrid cell is not as
    simple as changing some style because the default renderer for a
    DataGrid cell does not have a backgroundColor. Therefore, to do
    this simple task, you have to create a custom itemRenderer where
    you draw your own background in the updateDisplayList function.
    HTH
    Uwe

  • Dynamically Named Restore Points?

    Does anyone know how to create dynamically named restore points? I have an RMAN script that is currently setup like this:
    sql 'drop restore point lv_restore';
    sql 'create restore point lv_restore';
    backup database plus archivelog;
    delete noprompt obsolete;
    exit;
    The first line is where I drop the restore point and the second line is where I create it again. This way the restore point is set just before the backup begins.
    Okay - it's setup like this because when I don't drop the restore point ahead of time I get the following error:
    sql statement: create restore point lv_restore
    RMAN-00571: =================================================
    RMAN-00569: ======== ERROR MESSAGE STACK FOLLOWS ===========
    RMAN-00571: =================================================
    RMAN-03009: failure of sql command on default channel at 04/29/2008 15:22:44
    RMAN-11003: failure during parse/execution of SQL statement: create restore point lv_restore
    ORA-38778: Restore point 'LV_RESTORE' already exists.
    This makes sense to me, actually. What I would love to do is to dynamically append the current date to the end of the restore point name. The idea is to have the restore points named something like this:
    lv_restore_2008-04-25
    lv_restore_2008-04-26
    lv_restore_2008-04-27
    lv_restore_2008-04-28
    lv_restore_2008-04-29
    etc...
    Is there any way I can dynamically name restore points?

    Can anyone explain to me how to use the syntax provided by damorgan to actually append a value to the restore point name in the script I provided?
    Any help is greatly appreciated.

Maybe you are looking for