Dynamic node creation from RTTI structure and dynamic mapping
Hi,
I'd like to create a dynamic node in my component controller then map this node to a node in my view and bind it to a dynamic table.
I create the dynamic node in my component controller using the add_new_child_node method :
CALL METHOD root_node_info->add_new_child_node
EXPORTING
name = 'MY_TABLE'
static_element_rtti = struct_type
is_static = ABAP_true
RECEIVING
child_node_info = node_info
Then I use the add_new_mapped_child_node method to map the node in the view :
* Map the context node dynamically
wa_path = 'COMPONENTCONTROLLER.MY_TABLE'.
insert wa_path into table tab_mapping_path.
stru_mapping_info-controller = 'COMPONENTCONTROLLER'.
stru_mapping_info-path = tab_mapping_path.
lo_node_info = wd_context->get_node_info( ).
CALL METHOD lo_node_info->add_new_mapped_child_node
EXPORTING
child_name = 'MY_TABLE'
mapping_info = stru_mapping_info
receiving
child_node_info = lo_dyn_node_info
The child node is created in my view context but it doesn't have any attribute or static element RTTI.
Do I have to add each attribute with the add_attribute method and then the add_new_mapped_child_node method will copy them over?
Regards,
Pierre
Problem solved, the path was not good :
* Map the context node dynamically
* wa_path = 'COMPONENTCONTROLLER.MY_TABLE'.
* insert wa_path into table tab_mapping_path.
stru_mapping_info-controller = 'COMPONENTCONTROLLER'.
* stru_mapping_info-path = tab_mapping_path.
append 'COMPONENTCONTROLLER' to stru_mapping_info-path.
append 'MY_TABLE' to stru_mapping_info-path.
lo_node_info = wd_context->get_node_info( ).
CALL METHOD lo_node_info->add_new_mapped_child_node
EXPORTING
child_name = 'MY_TABLE'
mapping_info = stru_mapping_info
receiving
child_node_info = lo_dyn_node_info
Regards,
Pierre
Similar Messages
-
Node removed from the cluster and cannot joined to clustr again
Hi
I have problem with 2 node cluster. we are running windows 2008 R2 enterprise edition. Suddenly one node had some issue with network connnectivity and it was removed from the cluster. on the console its shows node1 offline. connectivity between the
server public and private nic is fine.
Node 'node1' failed to form a cluster. This was because the witness was not accessible. Please ensure that the witness resource is online and available.
Cluster resource 'File Share Witness' in clustered service or application 'Cluster Group' failed.
'File Share Witness is accessible to both the nodes. from the cluster log i can see failed to attempt lock on the FSW.
I have restarted the failure node. still the problem exist.
Thanks in advance to throw some valuable answers to my issue.Are you using Volume Manager Disk Group. Please check the below link if you are using it.
http://www.symantec.com/business/support/index?page=content&id=TECH127796
Thanks,
Umesh.S.K -
Calling IDoc structure from IDOC metadata into Java mapping.
Hi All,
I have a requirement where we need to post an IDOC on target side, We are having to go for a Java Mapping ,so I need to create a Target XML with IDOC Structure, So i need to understand if we could import the structure from IDOC Meta Data in to the Java Mapping insted of creating the IDOC Structure, I am using DOM parser for my Java Mapping,
Really appreciate your response in this regard.
Best Regards
JayaramHi Jayram,
In your requirement, get the xsd format of the idoc from idoc structure and using String xsdFormat ="xsd retrieved"; in the java mapping, you can create the xml structure using DOM parse APIs and then you can put values into the structure and pass it.
Thanks,
RK -
Import XSD from BAPI structure
Hi all,
I have a problem when export XSD scchema from BAPI structure and use this schema to create a data type using import XSD schema. The error is following displayed:
Schema to be handled does not contain a definition of type BAPI_SALESORDER_CREATEFROMDAT2.
Any idea?????
Thanks in advance,
Michele LazzaratoHi Stephan,
I have created an Abap Proxy and the error message in English as follow:
Message Interface prova http://xtel.com/xi/Sales Order references RFC
Message BAPI_SALESORDER_CREAT EFROMDAT2 urn:sap-
com:document:sap:rfc:functions BAPI_SALESORDER_CREATEFROMDAT2.Response
and the
Message no. SPRX000
Thanks,
Michele. -
Dynamic Structure and Components Issue
Hi,
I have a requirement of creating an inbound idoc program and populating dynamic structures. The program for the dynamic structure creation is as follows: ( I have been referencing Heilmans Blog ): The part for the inbound idoc creation works fine. The data will come in a flat file with Table name and 15 characterstcis. The table name is known at runtime. I need to create the dynamic table, find out the components and then populate the custom table with the dynamically created structures.
Custom table: 4 components
Internal table from file: 15 components with value.
There could be more than one table in the flat file and not all components or char in the flat file is mapped to the table.
I have been able to code the part where the components in the structure and the file components are in the same order. The problem is if the components in the structure and the file components are not in the same order. I would appreciate some inputs in this issue.
The part that has to be worked out is:
IF NOT L_TABNAME IS INITIAL.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
ENDIF.
*& Report /FACTGLB/GTDMI_VARTAB_IDOCS02 *
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-07-02
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
REPORT ZGTDMI_VARTAB_IDOCS_DYNAMIC
NO STANDARD PAGE HEADING
LINE-SIZE 150
LINE-COUNT 55
MESSAGE-ID zfactglb.
**Include for Global Data Declaration
*INCLUDE /FACTGLB/GTDMI_VARTAB_TOP02.
**Include for Selection Screen
*INCLUDE /FACTGLB/GTDMI_VARTAB_SEL02.
**Include for Sub Routines
*INCLUDE /FACTGLB/GTDMI_VARTAB_FORMS02.
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP
*& Include /FACTGLB/GTDMI_VARTAB_TOP
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-07-02
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
TYPE POOLS
*Type declaration for ALV display
TYPE-POOLS : slis.
Include .
type-pools: col, "#EC *
icon, "#EC *
sym, "#EC *
abap. "#EC *
Target structure definitions
tables:
E1CUVTM, "#EC *
E1DATEM, "#EC *
E1CUV1M, "#EC *
edp21, "#EC *
edi_dc40, "#EC *
edi_dd40, "#EC *
edi_ds40. "#EC *
GLOBAL TYPES
TYPES : BEGIN OF ty_vartab.
include structure E1CUVTM.
TYPES: END OF ty_vartab.
TYPES : BEGIN OF ty_vartabdate.
INCLUDE STRUCTURE E1DATEM.
TYPES : END OF ty_vartabdate.
*Structure for data retreived
TYPES : BEGIN OF ty_vardetails.
INCLUDE STRUCTURE E1CUV1M.
TYPES : END OF ty_vardetails.
*Structure for data retreived from table tabinput.
TYPES : BEGIN OF ty_tabinput,
lines type string,
END OF ty_tabinput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_dsninput, "#EC *
LINE(101) type c,
END OF ty_dsninput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_newinput, "#EC *
LINE(101) type c,
flag(1) type c,
END OF ty_newinput.
*Structure for keeping the values of all the custom tables
TYPES : BEGIN OF ty_custom_tabs,
matnr TYPE matnr, "Material Number
werks TYPE werks_d, "Plant
lgort TYPE lgort_d, "Storage Location
qunty TYPE P DECIMALS 2, "Standard Order Quantity
det_loc TYPE CHAR6, "Detail Location
class TYPE CHAR2, "Class
rate TYPE P DECIMALS 2, "Rate
END OF ty_custom_tabs.
*Type declared for the internal table and work area which will store
*fields for error log
TYPES : BEGIN OF ty_error_log,
matnr TYPE matnr, "Material Number
mtart TYPE mtart, "Material Type
sel_data TYPE char10, "No of selectyed data
END OF ty_error_log.
*Structure for keeping the output data
TYPES : BEGIN OF ty_final,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
END OF ty_final.
TYPES: begin of TY_CONTENTHD,
VTNAM(018) type C,
FLAG(001) type C,
end of TY_CONTENTHD.
TYPES: begin of TY_CONTENT,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
Z_VARCOND TYPE VARCOND.
TYPES: end of TY_CONTENT.
TYPES: begin of TY_CONTENTTAB,
VTNAM(018) type C,
COMP1(30) TYPE C,
CHAR1(030) type C,
COMP2(30) TYPE C,
CHAR2(030) type C,
COMP3(30) TYPE C,
CHAR3(030) type C,
COMP4(30) TYPE C,
CHAR4(030) type C,
COMP5(30) TYPE C,
CHAR5(030) type C,
COMP6(30) TYPE C,
CHAR6(030) type C,
COMP7(30) TYPE C,
CHAR7(030) type C,
COMP8(30) TYPE C,
CHAR8(030) type C,
COMP9(30) TYPE C,
CHAR9(030) type C,
COMP10(30) TYPE C,
CHAR10(030) type C,
COMP11(30) TYPE C,
CHAR11(030) type C,
COMP12(30) TYPE C,
CHAR12(030) type C,
COMP13(30) TYPE C,
CHAR13(030) type C,
COMP14(30) TYPE C,
CHAR14(030) type C,
COMP15(30) TYPE C,
CHAR15(030) type C,
FLAG(001) type C.
TYPES: end of TY_CONTENTTAB.
TYPES: BEGIN OF TY_E1CUVTM,
MSGFN TYPE MSGFN,
VAR_TAB TYPE APITABL,
STATUS TYPE RCUTBST,
VTGROUP TYPE RCUTBGR,
AUTHSTRUC TYPE RCUTBBE,
AUTHENTRY TYPE RCUFNBI,
FLDELETE TYPE FLLKENZ,
DBTABNAME TYPE TABNAME16,
DBCONACTIVE TYPE DBCON_ACTI,
PRESDEC TYPE VTDCT,
END OF TY_E1CUVTM.
TYPES: BEGIN OF TY_E1CUV1M,
MSGFN TYPE MSGFN,
VTLINENO TYPE VTLINENO,
VTCHARACT TYPE ATNAM,
ATWRT TYPE ATWRT,
ATFLV TYPE ATFLV,
ATAWE TYPE MSEHI,
ATFLB TYPE ATFLB,
ATAW1 TYPE MSEHI,
ATCOD TYPE ATCOD,
ATTLV TYPE ATTLV,
ATTLB TYPE ATTLB,
ATPRZ TYPE ATPRZ,
ATINC TYPE ATINC,
VTLINENO5 TYPE VTLINENO5,
END OF TY_E1CUV1M.
TYPES: BEGIN OF TY_E1DATEM,
MSGFN TYPE MSGFN,
KEY_DATE TYPE SYDATUM,
AENNR TYPE AENNR,
EFFECTIVITY TYPE CC_MTEFF,
END OF TY_E1DATEM.
TYPES: BEGIN OF ty_vtnam,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Name of variant table
dbtab_name type tabname16, "Custom table Name
error TYPE char1, " Indicates error in data format
reas TYPE char50, " Reason for failure
END OF ty_vtnam.
Get data type for characteristic
TYPES: BEGIN OF ty_cabn,
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
atfor TYPE atfor, "Data type of characteristic
atson TYPE atson, "Indicator: Additional Values
atprt TYPE atprt, "Check table
atprr TYPE atprr, "Name of Check Report Program
atprf TYPE atprf, "Function Module for Checking Values
anzdz TYPE anzdz, "Number of Decimal Places
check TYPE char1, "Indicates check required or not
END OF ty_cabn.
Get field names of variant table
TYPES: BEGIN OF ty_cuvtab_fld,
vtint TYPE vtint, " Internal number of variant table
atinn TYPE atinn, " Internal characteristic
vtpos TYPE vtpos, " Item number of characteristic in variant
*mod-012
DBFLD type NAME_FELD,
*mod-012
exist TYPE char1, " X Indictaes characteristic is part of fil
END OF ty_cuvtab_fld.
Store all data in internal table
TYPES: BEGIN OF ty_file,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
flag TYPE char1,
error TYPE char50,
END OF ty_file.
To check for duplicates
TYPES: BEGIN OF ty_dupl,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
slnid TYPE slnid,
END OF ty_dupl.
Get previously loaded characteristic values for internal table (CHAR)
TYPES: BEGIN OF ty_cuvtab_valc,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
valc TYPE atwrt, " Characteristic Value
END OF ty_cuvtab_valc.
Get previously loaded characteristic values for internal table (NUM)
TYPES: BEGIN OF ty_cuvtab_valn,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
val_from TYPE atflv, " Internal floating point from
END OF ty_cuvtab_valn.
Store column positions of characteristics
TYPES: BEGIN OF ty_col_pos,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Variant table name
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
field TYPE fieldname, "Field name
req TYPE char1, " Required or not
vtpos TYPE vtpos, " Item number of characteristics
DBFLD type NAME_FELD, " Field Name of Custom table.
END OF ty_col_pos.
Store valid values for characteristics
TYPES: BEGIN OF ty_cawn,
atinn TYPE atinn, " Internal characteristic
atzhl TYPE atzhl, " Int counter
atwrt TYPE atwrt, " Characteristic Value
atflv TYPE atflv, " Internal floating point from
lkenz TYPE lkenz, " Deletion indicator
END OF ty_cawn.
Store error messages for individual lines
TYPES: BEGIN OF ty_error,
vtnam TYPE vtnam, " Variant table name
fname TYPE fieldname, " Fieldname
atnam TYPE atnam, " Characteristic name
atwrt TYPE atwrt, " Characteristic value
row TYPE char5, " Row id
END OF ty_error.
Begin TPR# 4618
To store unique number for variant
TYPES: BEGIN OF ty_vnt_ma,
vtnam TYPE vtnam,
unique_no TYPE ZGTDM_UNQN,
no_chr TYPE ZGTDM_NO_CHR,
END OF ty_vnt_ma.
TYPES: BEGIN OF ty_dbtab,
vtint TYPE vtint,
vtnam TYPE vtnam,
DBTAB_NAME TYPE TABNAME16,
END OF ty_dbtab.
To find out concatenated number for
TYPES: BEGIN OF ty_split,
f1 TYPE char6,
END OF ty_split.
TYPES: BEGIN OF ty_charval,
char TYPE char30,
END OF ty_charval.
TYPES: BEGIN OF TY_DATA,
name TYPE string,
value(15) type c,
END OF TY_DATA.
DATA: I_DATATAB TYPE STANDARD TABLE OF TY_DATA.
TYPES:
TUMLS_MESSTYPE type /SAPDMC/LS_MESSTYPE,
TUMLS_MESSTYPETXT type EDI_TEXT60,
TUMLS_MESSCODE type EDIPMESCOD.
TYPES:
TUMLS_TABNAME TYPE TABNAME, "#EC *
TUMLS_SEGMENT TYPE TABNAME. "#EC *
TYPES:
TUMLS_PATHFILE TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILENAME TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILETEXT TYPE /SAPDMC/LS_FILETEXT.
TYPES:
BEGIN OF type_errorline,
msgty type SYMSGTY,
id type SYMSGID,
msgno type symsgno,
par1 type symsgv,
par2 type symsgv,
par3 type symsgv,
par4 type symsgv,
END OF type_errorline.
TYPES:
type_errortab TYPE SORTED TABLE
OF type_errorline
WITH NON-UNIQUE KEY id msgno par1 par2 par3 par4.
DATA:
LV_INDEX TYPE SY-INDEX,
LV_INDEX2 TYPE SYINDEX,
LV_TABLE1 TYPE REF TO DATA,
LV_TABLE2 TYPE REF TO DATA,
LV_TABLE3 TYPE REF TO DATA,
LV_TABLE4 TYPE REF TO DATA,
LV_LINE1 TYPE REF TO DATA,
LV_LINE2 TYPE REF TO DATA,
LV_LINE3 TYPE REF TO DATA,
LV_LINE4 TYPE REF TO DATA,
LV_OFFSET1 TYPE SYTABIX,
ST_IS_LAYOUT_ALV TYPE SLIS_LAYOUT_ALV,
L_IT_FCATLOG_ALV TYPE SLIS_T_FIELDCAT_ALV,
L_IT_FLDCAT TYPE LVC_T_FCAT.
GLOBAL INTERNAL TABLES
DATA : i_newinput TYPE STANDARD TABLE OF ty_newinput INITIAL SIZE 0."#EC *
DATA : i_contentheader1 TYPE STANDARD TABLE OF ty_contenthd INITIAL SIZE 0."#EC *
DATA : i_contenttab1 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab2 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab3 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab4 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab5 TYPE STANDARD TABLE OF ty_contenttab INITIAL SIZE 0."#EC *
DATA : i_E1CUV1M TYPE STANDARD TABLE OF E1CUV1M INITIAL SIZE 0."#EC *
DATA : i_errortab TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
GLOBAL WORK AREAS
**Internal Table for the structure TY_T001L
DATA : wa_vartab TYPE ty_vartab. "#EC *
DATA : wa_vartabdate TYPE ty_vartabdate. "#EC *
DATA : wa_vardetails TYPE ty_vardetails. "#EC *
DATA : wa_tabinput TYPE ty_tabinput. "#EC *
DATA : wa_dsninput TYPE ty_dsninput. "#EC *
DATA : wa_newinput TYPE ty_newinput. "#EC *
DATA : wa_gnewinput TYPE ty_newinput. "#EC *
DATA : wa_ginput_data TYPE ty_newinput. "#EC *
DATA : wa_final TYPE ty_final. "#EC *
DATA : wa_content TYPE ty_content. "#EC *
DATA : wa_contenthd TYPE ty_contenthd. "#EC *
DATA : wa_contentheader type ty_contenthd. "#EC *
DATA : wa_contenttab TYPE ty_content. "#EC *
DATA : wa_content1 TYPE ty_content. "#EC *
DATA : wa_contenthd1 TYPE ty_contenthd. "#EC *
DATA : wa_contentheader1 type ty_contenthd. "#EC *
DATA : wa_contenttab1 TYPE ty_content. "#EC *
DATA : wa_contenttab2 TYPE ty_content. "#EC *'
DATA : wa_contenttab3 TYPE ty_content. "#EC *
DATA : wa_contenttab4 TYPE ty_content. "#EC *
DATA : wa_contenttab5 TYPE ty_contentTAB. "#EC *
DATA : wa_E1CUVTM TYPE E1CUVTM. "#EC *
DATA : wa_E1CUV1M TYPE E1CUV1M. "#EC *
DATA : wa_E1DATEM TYPE E1DATEM. "#EC *
DATA : wa_error_tab TYPE solisti1. "#EC *
INTERNAL TABLES AND WORK AREAS FOR BDC
*Internal Table to store the data to display the error message
DATA : i_errormsg TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
*Internal Table to store the data to display the error message
DATA : i_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
DATA : itab_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
**Work area to store the data to display the error message
DATA : wa_errormsg TYPE solisti1. "#EC *
**Internal table which will store data for the error log
DATA:i_error_log TYPE STANDARD TABLE OF ty_error_log INITIAL SIZE 0."#EC *
GLOBAL VARIABLES
DATA: G_FILE TYPE string. "#EC *
DATA : g_ctr_input_recs(5) type c. "#EC *
DATA: g_ctr_output_recs(5) type p. "#EC *
data : g_msg(100) type c. "#EC *
data: g_struct_file TYPE string. "#EC *
data: g_login type FILEINTERN. "#EC *
data: g_phyin type string. "#EC *
DATA: g_lprnt type RSPOPSHORT. "#EC *
DATA: g_FNAME1 TYPE STRING. "#EC *
DATA : g_repid TYPE repid, "#EC *
g_exit(1) TYPE C, "#EC *
gx_variant type disvariant. "#EC *
DATA : g_lines TYPE i . "#EC *
data : g_save(1) type c. "#EC *
DATA : g_splid TYPE rspoid . "#EC *
data: p_login type FILEINTERN. "#EC *
data: p_phyin type string. "#EC *
DATA:
go_table TYPE REF TO cl_salv_table,
go_sdescr TYPE REF TO cl_abap_structdescr,
go_tdescr TYPE REF TO cl_abap_tabledescr,
gdo_data TYPE REF TO data,
gdo_handle TYPE REF TO data,
gs_comp TYPE abap_componentdescr,
gt_components TYPE abap_component_tab.
FIELD-SYMBOLS:
TYPE table.
GLOBAL CONSTANTS
CONSTANTS c_msgar TYPE rslgarea VALUE 'F8'. "#EC *
CONSTANTS c_msgid TYPE rslgsubid VALUE 'E'. "#EC *
CONSTANTS c_urgnc TYPE char04 VALUE 'HIGH'. "#EC *
CONSTANTS C_X(1) TYPE C VALUE 'X'. "#EC *
CONSTANTS C_Y(1) TYPE C VALUE 'Y'. "#EC *
CONSTANTS C_Z(1) TYPE C VALUE 'Z'. "#EC *
CONSTANTS C_E(1) TYPE C VALUE 'E'. "#EC *
CONSTANTS C_SAP(3) TYPE C VALUE 'SAP'. "#EC *
CONSTANTS C_MOD(3) TYPE C VALUE 'MOD'. "#EC *
CONSTANTS C_MD1(3) TYPE C VALUE 'MD1'. "#EC *
CONSTANTS C_MD2(3) TYPE C VALUE 'MD2'. "#EC *
CONSTANTS C_MD3(3) TYPE C VALUE 'MD3'. "#EC *
CONSTANTS C_MD4(3) TYPE C VALUE 'MD4'. "#EC *
CONSTANTS C_MD5(3) TYPE C VALUE 'MD5'. "#EC *
constants: c_000001(6) type c value '000001', "#EC *
c_e1cuv1m(7) type c value 'E1CUV1M', "#EC *
c_02(2) type c value '02', "#EC *
c_009(3) type c value '009', "#EC *
c_0001(4) type c value '0001'. "#EC *
constants: c_e1datem(7) type c value 'E1DATEM'. "#EC *
constants: c_e1cuvtm(7) type c value 'E1CUVTM'. "#EC *
GLOBAL INTERNAL TABLES FOR ALV DISPLAY
*Internal tables for ALV Field cat
DATA :
i_fieldcat_ov TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_dtl TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_ov1 TYPE lvc_t_fcat, "#EC *
i_events TYPE slis_t_event. "#EC *
GLOBAL WORK AREAS FOR ALV DISPLAY
*Work area for ALV Field layout
DATA : wa_layout TYPE slis_layout_alv. "#EC *
*Work area for Field Cat. Table
DATA : wa_fieldcat TYPE slis_fieldcat_alv. "#EC *
GLOBAL VARIABLES FOR ALV DISPLAY
DATA : g_event TYPE slis_t_event. "#EC *
DATA : g_top_of_page TYPE slis_t_listheader. "#EC *
DATA : g_ok_code TYPE char4. "#EC *
DATA : g_variant type disvariant. "#EC *
GLOBAL CONSTANTS FOR ALV DISPLAY
BAL handling
data: iv_log_handle type BALLOGHNDL. "#EC *
data: is_log_header type bal_s_log. "#EC *
data: iv_object type bal_s_log-object value 'CAPI'. "#EC *
data: iv_subobject type bal_s_log-subobject value 'CAPI_LOG'."#EC *
data: iv_tcode type bal_s_log-altcode value 'SE38'. "#EC *
*MOD-005
RANGES:
R_MESTYP FOR EDIDC-MESTYP, "#EC *
R_CREDAT FOR EDIDC-CREDAT, "#EC *
R_CRETIM FOR EDIDC-CRETIM, "#EC *
R_SNDPRT FOR EDIDC-SNDPRT, "#EC *
R_SNDPRN FOR EDIDC-SNDPRN. "#EC *
DATA:
L_MESSTYPE TYPE TUMLS_MESSTYPE. "#EC *
*MOD-005
data: p_sndprn TYPE EDI_SNDPRN, "#EC *
p_sndprt TYPE EDI_SNDPRT, "#EC *
p_sndpor TYPE EDI_SNDPOR. "#EC *
data: p_rcvprn TYPE EDI_RCVPRN, "#EC *
p_rcvprt TYPE EDI_RCVPRT, "#EC *
p_rcvpor TYPE EDI_RCVPOR. "#EC *
data:
init_E1CUVTM type E1CUVTM, "#EC *
prev_E1CUVTM type E1CUVTM, "#EC *
init_E1DATEM type E1DATEM, "#EC *
prev_E1DATEM type E1DATEM, "#EC *
init_E1CUV1M type E1CUV1M, "#EC *
prev_E1CUV1M type E1CUV1M. "#EC *
Source structure definitions
data:
begin of LSMW_TAB_CONTENT, "#EC *
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
end of LSMW_TAB_CONTENT.
Counters
data:
g_cnt_VAR_TAB type i, "#EC *
g_cnt_TAB_CONTENT type i. "#EC *
Counter ct_xxxxxxxxxx: number of transferred records
data:
ct_edi_dc40 type i, "#EC *
cs_edi_dc40 type i, "#EC *
ct_E1CUVTM type i, "#EC *
cs_E1CUVTM type i, "#EC *
ct_E1DATEM type i, "#EC *
cs_E1DATEM type i, "#EC *
ct_E1CUV1M type i, "#EC *
cs_E1CUV1M type i. "#EC *
Global data definitions and data declarations
DATA: wa_cabn TYPE ty_cabn,
wa_cawn TYPE ty_cawn,
wa_file TYPE ty_file,
wa_vtnam TYPE ty_vtnam,
wa_cuvtab_fld TYPE ty_cuvtab_fld,
wa_cuvtab_valn TYPE ty_cuvtab_valn,
wa_cuvtab_valc TYPE ty_cuvtab_valc,
wa_col_pos TYPE ty_col_pos,
wa_error TYPE ty_error,
wa_dupl TYPE ty_dupl,
wa_dupl_file TYPE ty_dupl.
DATA: wa_vnt_ma TYPE ty_vnt_ma,
wa_split TYPE ty_split.
DATA: wa_charval TYPE ty_charval. "#EC *
Internal table
DATA: i_cabn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_temp TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_atinn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_file TYPE STANDARD TABLE OF ty_file, "#EC *
i_file_tmp TYPE STANDARD TABLE OF ty_file, "#EC *
i_vtnam TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab_fld TYPE STANDARD TABLE OF ty_cuvtab_fld, "#EC *
i_cuvtab_valn TYPE STANDARD TABLE OF ty_cuvtab_valn, "#EC *
i_cuvtab_valc TYPE STANDARD TABLE OF ty_cuvtab_valc, "#EC *
i_col_pos TYPE STANDARD TABLE OF ty_col_pos, "#EC *
i_cawn TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_n TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_c TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_i TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cuv_error TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_dupl TYPE STANDARD TABLE OF ty_dupl, "#EC *
i_dbtab TYPE STANDARD TABLE OF ty_dbtab. "#EC *
DATA: i_vnt_ma TYPE STANDARD TABLE OF ty_vnt_ma, "#EC *
i_split TYPE STANDARD TABLE OF ty_split. "#EC *
DATA: i_dupl_file TYPE STANDARD TABLE OF ty_dupl. "#EC *
DATA: i_charval TYPE STANDARD TABLE OF ty_charval. "#EC *
Constants
CONSTANTS: c_char TYPE atfor VALUE 'CHAR', "#EC *
c_date TYPE atfor VALUE 'DATE', "#EC *
c_time TYPE atfor VALUE 'TIME', "#EC *
c_varcond TYPE atnam VALUE 'Z_VARCOND'. "#EC *
Field Symbols
FIELD-SYMBOLS: TYPE ANY.
Variables
DATA: g_raw(500) TYPE c, "#EC *
g_invalid TYPE char1, "#EC *
g_error TYPE char1, "#EC *
g_message TYPE char50, "#EC *
g_slnid_c TYPE slnid, "#EC *
g_slnid_n TYPE slnid, "#EC *
g_row TYPE char5. "#EC *
DATA: g_varcond TYPE varcond, "Variant condition "#EC NEEDED
g_split_var TYPE i. "#EC *
Types: begin of ty_charname,
name type atnam,
end of ty_charname.
data: wa_charname type ty_charname, "#EC *
i_charname type standard table of ty_charname. "#EC *
data: cnt_i type i, "#EC *
g_tabix type char10. "#EC *
Types: begin of ty_itab_zedidc40.
include structure edi_dc40.
TYPES: end of ty_itab_zedidc40.
Types: begin of ty_itab_zedidd40.
include structure edi_dd40.
TYPES: end of ty_itab_zedidd40.
DATA: itab_zedidc40 type standard table of
ty_itab_zedidc40 initial size 0. "#EC *
DATA: itab_zedidd40 type standard table of
ty_itab_zedidd40 initial size 0. "#EC *
DATA: wa_itab_zedidc40 type ty_itab_zedidc40.
DATA: wa_itab_zedidd40 type ty_itab_zedidd40.
*MOD-009
data: itab_ze1cuvtm type e1cuvtm, "#EC *
itab_ze1datem type e1datem, "#EC *
itab_ze1cuv1m type e1cuv1m. "#EC *
data: wdocnum(16) type n value 0. "#EC *
data: wsegnum(6) type n value 0. "#EC *
data: witemno(10) type n value 0. "#EC *
data: witemno_new(10) type n value 0. "#EC *
data: witemno_gst(10) type n value 0. "#EC *
data: witemno_qst(10) type n value 0. "#EC *
TYPES: BEGIN OF ty_input_data1, "#EC *
line(560) type c,
flag(1) type c,
END OF ty_input_data1.
DATA: i_input_data type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: i_input_data1 type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: wa_input_data type ty_input_data1. "#EC *
DATA: g_cnt_input_recs type i. "#EC *
DATA: g_flg_error type c. "#EC *
DATA: l_lines type i. "#EC *
DATA: l_lines_varcond type i. "#EC *
DATA: l_lines1 type i. "#EC *
DATA: l_tabix type i. "#EC *
DATA: wa_input_data1 type ty_input_data1. "#EC *
DATA: FILE TYPE STRING.
Fields that are made available to the user:
DATA:
g_cnt_records_read TYPE i, "#EC *
g_cnt_records_transferred TYPE i, "#EC *
g_cnt_transactions_read TYPE i, "#EC *
g_cnt_transactions_transferred TYPE i, "#EC *
g_cnt_idocs_package TYPE i. "#EC *
data: v_log_handle type balloghndl. "#EC *
DATA: gt_curr_edi_dc40 TYPE STANDARD TABLE OF edi_dc40 initial size 0."#EC *
DATA: gt_curr_edi_dd40 TYPE STANDARD TABLE OF edi_dd40 initial size 0."#EC *
DATA: wa_curr_edi_dc40 TYPE edi_dc40. "#EC *
DATA: wa_curr_edi_dd40 TYPE edi_dd40. "#EC *
internal table for error messages during conversion
DATA: g_error_tab TYPE type_errortab, "#EC *
wa_errortab TYPE type_errorline. "#EC *
DATA: g_edidd_segnam type EDI4SEGNAM, "#EC *
g_edidd_hlevel type EDI4HLEVEC. "#EC *
DATA: g_segnum(6) TYPE n.
DATA: g_objecttype(2) type C.
DATA: P_FNAME(128) TYPE C VALUE '/usr/sap/trans/vartabheader'. " MODIF ID MD1 OBLIGATORY.
DATA: P_FNAME1(128) TYPE C VALUE '/usr/sap/trans/vartabcontent'. " MODIF ID MD1 OBLIGATORY.
DATA: alv_fldcat TYPE slis_t_fieldcat_alv,
it_fldcat TYPE lvc_t_fcat.
field-symbols: .
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
data: l_wa_data TYPE TY_CONTENT,
l_tabname TYPE tabname,
itab_data TYPE standard table of TY_CONTENT.
DATA: l_len_slnid TYPE i, "#EC NEEDED
l_len_varcond TYPE i, "#EC NEEDED
l_temp_slnid TYPE i, "#EC NEEDED
l_temp_slnc TYPE char5, "#EC NEEDED
l_temp_varcond TYPE varcond, "#EC NEEDED
l_sub_var TYPE i, "#EC NEEDED
l_val_split TYPE char10. "#EC NEEDED
DATA: l_invalid. "#EC NEEDED
DECLARATION FOR SELECTION SCREEN
*selection-screen skip 1.
*For all the input field entries
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
*Parameter for Input File Name:
PARAMETERS: p_inpt TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File Variant table
PARAMETERS: p_inpt1 TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File variant Content
SELECTION-SCREEN END OF BLOCK bl1.
IDoc creation
selection-screen begin of block idocpars
with frame title text-006.
parameters:
p_trfcpt as checkbox default C_X MODIF ID MD3,
p_packge(5) type n default 1 MODIF ID MD3.
selection-screen end of block idocpars.
SELECTION-SCREEN BEGIN OF BLOCK bl5 WITH FRAME TITLE text-038.
Radio Buttons :
parameters:
rb_idocp RADIOBUTTON GROUP RB3 DEFAULT 'X' USER-COMMAND UCOM MODIF ID MD6,
rb_custt RADIOBUTTON GROUP RB3 MODIF ID MD6.
SELECTION-SCREEN END OF BLOCK bl5.
SELECTION-SCREEN BEGIN OF BLOCK bl3 WITH FRAME TITLE text-032.
Radio Buttons :
parameters:
rb_apsrv RADIOBUTTON GROUP RB1 DEFAULT 'X' USER-COMMAND UCOM MODIF ID MD4,
rb_convt RADIOBUTTON GROUP RB1 MODIF ID MD4,
rb_idoc RADIOBUTTON GROUP RB1 MODIF ID MD4,
rb_proc RADIOBUTTON GROUP RB1 MODIF ID MD4.
SELECTION-SCREEN END OF BLOCK bl3.
SELECTION-SCREEN BEGIN OF BLOCK bl4 WITH FRAME TITLE text-037.
Radio Buttons :
parameters:
rb_appct RADIOBUTTON GROUP RB2 DEFAULT 'X' USER-COMMAND UCOM MODIF ID MD5,
rb_conct RADIOBUTTON GROUP RB2 MODIF ID MD5,
rb_cust RADIOBUTTON GROUP RB2 MODIF ID MD5.
SELECTION-SCREEN END OF BLOCK bl4.
INITIALIZATION
INITIALIZATION.
Check selection-screen entries *
*AT SELECTION-SCREEN.
PERFORM sub_get_physical_file USING p_fpath p_fname.
PERFORM sub_get_physical_file1 USING p_fpath1 p_fname1.
AT SELECTION SCREEN
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
PERFORM sub_get_file. " CHANGING p_fname. "#EC *
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname1.
PERFORM sub_get_file1. " CHANGING p_fname1. "#EC *
AT SELECTIHi,
I now have a requirement for the following:
Duplicate VARCOND if I Use small letters and capital letters. Sequential number also duplicated.
Here is the code and would appreciate if someone could shed some light on the issue.
*& Report ZVARTABDYNFINAL
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-08-25
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
REPORT ZVARTABDYNFINAL NO STANDARD PAGE HEADING
LINE-SIZE 150
LINE-COUNT 55
MESSAGE-ID /factglb/gta_custdev.
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP
*& Include /FACTGLB/GTDMI_VARTAB_TOP
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-08-25
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
TYPE POOLS
TYPE POOLS
TYPE POOLS
*Type declaration for ALV display
TYPE-POOLS : slis.
Include <icon>.
type-pools: col, "#EC *
icon, "#EC *
sym, "#EC *
abap. "#EC *
Target structure definitions
tables:
E1CUVTM, "#EC *
E1DATEM, "#EC *
E1CUV1M, "#EC *
edp21, "#EC *
edi_dc40, "#EC *
edi_dd40, "#EC *
edi_ds40. "#EC *
GLOBAL TYPES
TYPES : BEGIN OF ty_vartab.
include structure E1CUVTM.
TYPES: END OF ty_vartab.
TYPES : BEGIN OF ty_vartabdate.
INCLUDE STRUCTURE E1DATEM.
TYPES : END OF ty_vartabdate.
*Structure for data retreived
TYPES : BEGIN OF ty_vardetails.
INCLUDE STRUCTURE E1CUV1M.
TYPES : END OF ty_vardetails.
*Structure for data retreived from table tabinput.
TYPES : BEGIN OF ty_tabinput,
lines type string,
END OF ty_tabinput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_dsninput, "#EC *
LINE(101) type c,
END OF ty_dsninput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_newinput, "#EC *
LINE(101) type c,
flag(1) type c,
END OF ty_newinput.
*Structure for keeping the values of all the custom tables
TYPES : BEGIN OF ty_custom_tabs,
matnr TYPE matnr, "Material Number
werks TYPE werks_d, "Plant
lgort TYPE lgort_d, "Storage Location
qunty TYPE P DECIMALS 2, "Standard Order Quantity
det_loc TYPE CHAR6, "Detail Location
class TYPE CHAR2, "Class
rate TYPE P DECIMALS 2, "Rate
END OF ty_custom_tabs.
*Type declared for the internal table and work area which will store
*fields for error log
TYPES : BEGIN OF ty_error_log,
matnr TYPE matnr, "Material Number
mtart TYPE mtart, "Material Type
sel_data TYPE char10, "No of selectyed data
END OF ty_error_log.
*Structure for keeping the output data
TYPES : BEGIN OF ty_final,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
END OF ty_final.
TYPES: begin of TY_CONTENTHD,
VTNAM(018) type C,
FLAG(001) type C,
end of TY_CONTENTHD.
TYPES: begin of TY_CONTENT,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
Z_VARCOND type VARCOND.
TYPES: end of TY_CONTENT.
TYPES: begin of TY_CONTENTTAB,
VTNAM(018) type C,
COMP1(30) TYPE C,
CHAR1(030) type C,
COMP2(30) TYPE C,
CHAR2(030) type C,
COMP3(30) TYPE C,
CHAR3(030) type C,
COMP4(30) TYPE C,
CHAR4(030) type C,
COMP5(30) TYPE C,
CHAR5(030) type C,
COMP6(30) TYPE C,
CHAR6(030) type C,
COMP7(30) TYPE C,
CHAR7(030) type C,
COMP8(30) TYPE C,
CHAR8(030) type C,
COMP9(30) TYPE C,
CHAR9(030) type C,
COMP10(30) TYPE C,
CHAR10(030) type C,
COMP11(30) TYPE C,
CHAR11(030) type C,
COMP12(30) TYPE C,
CHAR12(030) type C,
COMP13(30) TYPE C,
CHAR13(030) type C,
COMP14(30) TYPE C,
CHAR14(030) type C,
COMP15(30) TYPE C,
CHAR15(030) type C,
FLAG(001) type C.
TYPES: end of TY_CONTENTTAB.
TYPES: BEGIN OF TY_E1CUVTM,
MSGFN TYPE MSGFN,
VAR_TAB TYPE APITABL,
STATUS TYPE RCUTBST,
VTGROUP TYPE RCUTBGR,
AUTHSTRUC TYPE RCUTBBE,
AUTHENTRY TYPE RCUFNBI,
FLDELETE TYPE FLLKENZ,
DBTABNAME TYPE TABNAME16,
DBCONACTIVE TYPE DBCON_ACTI,
PRESDEC TYPE VTDCT,
END OF TY_E1CUVTM.
TYPES: BEGIN OF TY_E1CUV1M,
MSGFN TYPE MSGFN,
VTLINENO TYPE VTLINENO,
VTCHARACT TYPE ATNAM,
ATWRT TYPE ATWRT,
ATFLV TYPE ATFLV,
ATAWE TYPE MSEHI,
ATFLB TYPE ATFLB,
ATAW1 TYPE MSEHI,
ATCOD TYPE ATCOD,
ATTLV TYPE ATTLV,
ATTLB TYPE ATTLB,
ATPRZ TYPE ATPRZ,
ATINC TYPE ATINC,
VTLINENO5 TYPE VTLINENO5,
END OF TY_E1CUV1M.
TYPES: BEGIN OF TY_E1DATEM,
MSGFN TYPE MSGFN,
KEY_DATE TYPE SYDATUM,
AENNR TYPE AENNR,
EFFECTIVITY TYPE CC_MTEFF,
END OF TY_E1DATEM.
TYPES: BEGIN OF ty_vtnam,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Name of variant table
dbtab_name type tabname16, "Custom table Name
error TYPE char1, " Indicates error in data format
reas TYPE char50, " Reason for failure
END OF ty_vtnam.
Get data type for characteristic
TYPES: BEGIN OF ty_cabn,
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
atfor TYPE atfor, "Data type of characteristic
atson TYPE atson, "Indicator: Additional Values
atprt TYPE atprt, "Check table
atprr TYPE atprr, "Name of Check Report Program
atprf TYPE atprf, "Function Module for Checking Values
anzdz TYPE anzdz, "Number of Decimal Places
check TYPE char1, "Indicates check required or not
END OF ty_cabn.
Get field names of variant table
TYPES: BEGIN OF ty_cuvtab_fld,
vtint TYPE vtint, " Internal number of variant table
atinn TYPE atinn, " Internal characteristic
vtpos TYPE vtpos, " Item number of characteristic in variant
*mod-012
DBFLD type NAME_FELD,
*mod-012
exist TYPE char1, " X Indictaes characteristic is part of fil
END OF ty_cuvtab_fld.
Store all data in internal table
TYPES: BEGIN OF ty_file,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
flag TYPE char1,
error TYPE char50,
END OF ty_file.
To check for duplicates
TYPES: BEGIN OF ty_dupl,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
slnid TYPE slnid,
END OF ty_dupl.
Get previously loaded characteristic values for internal table (CHAR)
TYPES: BEGIN OF ty_cuvtab_valc,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
valc TYPE atwrt, " Characteristic Value
END OF ty_cuvtab_valc.
Get previously loaded characteristic values for internal table (NUM)
TYPES: BEGIN OF ty_cuvtab_valn,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
val_from TYPE atflv, " Internal floating point from
END OF ty_cuvtab_valn.
Store column positions of characteristics
TYPES: BEGIN OF ty_col_pos,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Variant table name
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
field TYPE fieldname, "Field name
req TYPE char1, " Required or not
vtpos TYPE vtpos, " Item number of characteristics
END OF ty_col_pos.
Store valid values for characteristics
TYPES: BEGIN OF ty_cawn,
atinn TYPE atinn, " Internal characteristic
atzhl TYPE atzhl, " Int counter
atwrt TYPE atwrt, " Characteristic Value
atflv TYPE atflv, " Internal floating point from
lkenz TYPE lkenz, " Deletion indicator
END OF ty_cawn.
Store error messages for individual lines
TYPES: BEGIN OF ty_error,
vtnam TYPE vtnam, " Variant table name
fname TYPE fieldname, " Fieldname
atnam TYPE atnam, " Characteristic name
atwrt TYPE atwrt, " Characteristic value
row TYPE char5, " Row id
END OF ty_error.
Begin TPR# 4618
To store unique number for variant
TYPES: BEGIN OF ty_vnt_ma,
vtnam TYPE vtnam,
unique_no TYPE ZGTDM_UNQN,
no_chr TYPE ZGTDM_NO_CHR,
END OF ty_vnt_ma.
TYPES: BEGIN OF ty_dbtab,
vtint TYPE vtint,
vtnam TYPE vtnam,
DBTAB_NAME TYPE TABNAME16,
END OF ty_dbtab.
To find out concatenated number for
TYPES: BEGIN OF ty_split,
f1 TYPE char6,
END OF ty_split.
TYPES: BEGIN OF ty_charval,
char TYPE char30,
END OF ty_charval.
TYPES: BEGIN OF TY_DATA,
name TYPE string,
value(15) type c,
END OF TY_DATA.
DATA: I_DATATAB TYPE STANDARD TABLE OF TY_DATA. "#EC NEEDED
TYPES:
TUMLS_MESSTYPE type /SAPDMC/LS_MESSTYPE,
TUMLS_MESSTYPETXT type EDI_TEXT60,
TUMLS_MESSCODE type EDIPMESCOD.
TYPES:
TUMLS_TABNAME TYPE TABNAME, "#EC *
TUMLS_SEGMENT TYPE TABNAME. "#EC *
TYPES:
TUMLS_PATHFILE TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILENAME TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILETEXT TYPE /SAPDMC/LS_FILETEXT.
TYPES:
BEGIN OF type_errorline,
msgty type SYMSGTY,
id type SYMSGID,
msgno type symsgno,
par1 type symsgv,
par2 type symsgv,
par3 type symsgv,
par4 type symsgv,
END OF type_errorline.
TYPES:
type_errortab TYPE SORTED TABLE
OF type_errorline
WITH NON-UNIQUE KEY id msgno par1 par2 par3 par4.
DATA:
LV_LINE2 TYPE REF TO DATA.
GLOBAL INTERNAL TABLES
DATA : i_newinput TYPE STANDARD TABLE OF ty_newinput INITIAL SIZE 0."#EC *
DATA : i_contentheader1 TYPE STANDARD TABLE OF ty_contenthd INITIAL SIZE 0."#EC *
DATA : i_contenttab1 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab2 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab3 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab4 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab5 TYPE STANDARD TABLE OF ty_contenttab INITIAL SIZE 0."#EC *
DATA : i_E1CUV1M TYPE STANDARD TABLE OF E1CUV1M INITIAL SIZE 0."#EC *
DATA : i_errortab TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
GLOBAL WORK AREAS
**Internal Table for the structure TY_T001L
DATA : wa_vartab TYPE ty_vartab. "#EC *
DATA : wa_vartabdate TYPE ty_vartabdate. "#EC *
DATA : wa_vardetails TYPE ty_vardetails. "#EC *
DATA : wa_tabinput TYPE ty_tabinput. "#EC *
DATA : wa_dsninput TYPE ty_dsninput. "#EC *
DATA : wa_newinput TYPE ty_newinput. "#EC *
DATA : wa_gnewinput TYPE ty_newinput. "#EC *
DATA : wa_ginput_data TYPE ty_newinput. "#EC *
DATA : wa_final TYPE ty_final. "#EC *
DATA : wa_content TYPE ty_content. "#EC *
DATA : wa_contenthd TYPE ty_contenthd. "#EC *
DATA : wa_contentheader type ty_contenthd. "#EC *
DATA : wa_contenttab TYPE ty_content. "#EC *
DATA : wa_content1 TYPE ty_content. "#EC *
DATA : wa_contenthd1 TYPE ty_contenthd. "#EC *
DATA : wa_contentheader1 type ty_contenthd. "#EC *
DATA : wa_contenttab1 TYPE ty_content. "#EC *
DATA : wa_contenttab2 TYPE ty_content. "#EC *
DATA : wa_contenttab3 TYPE ty_content. "#EC *
DATA : wa_contenttab4 TYPE ty_content. "#EC *
DATA : wa_contenttab5 TYPE ty_contentTAB. "#EC *
DATA : wa_E1CUVTM TYPE E1CUVTM. "#EC *
DATA : wa_E1CUV1M TYPE E1CUV1M. "#EC *
DATA : wa_E1DATEM TYPE E1DATEM. "#EC *
DATA : wa_error_tab TYPE solisti1. "#EC *
INTERNAL TABLES AND WORK AREAS FOR BDC
*Internal Table to store the data to display the error message
DATA : i_errormsg TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
*Internal Table to store the data to display the error message
DATA : i_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
DATA : itab_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
**Work area to store the data to display the error message
DATA : wa_errormsg TYPE solisti1. "#EC *
**Internal table which will store data for the error log
DATA:i_error_log TYPE STANDARD TABLE OF ty_error_log INITIAL SIZE 0."#EC *
GLOBAL VARIABLES
DATA: G_FILE TYPE string. "#EC *
DATA : g_ctr_input_recs(5) type c. "#EC *
DATA: g_ctr_output_recs(5) type p. "#EC *
data : g_msg(100) type c. "#EC *
data: g_struct_file TYPE string. "#EC *
data: g_login type FILEINTERN. "#EC *
data: g_phyin type string. "#EC *
DATA: g_lprnt type RSPOPSHORT. "#EC *
DATA: g_FNAME1 TYPE STRING. "#EC *
DATA : g_repid TYPE repid, "#EC *
g_exit(1) TYPE C, "#EC *
gx_variant type disvariant. "#EC *
DATA : g_lines TYPE i . "#EC *
data : g_save(1) type c. "#EC *
DATA : g_splid TYPE rspoid . "#EC *
data: p_login type FILEINTERN. "#EC *
data: p_phyin type string. "#EC *
GLOBAL CONSTANTS
CONSTANTS c_msgar TYPE rslgarea VALUE 'F8'. "#EC *
CONSTANTS c_msgid TYPE rslgsubid VALUE 'E'. "#EC *
CONSTANTS c_urgnc TYPE char04 VALUE 'HIGH'. "#EC *
CONSTANTS C_X(1) TYPE C VALUE 'X'. "#EC *
CONSTANTS C_Y(1) TYPE C VALUE 'Y'. "#EC *
CONSTANTS C_Z(1) TYPE C VALUE 'Z'. "#EC *
CONSTANTS C_E(1) TYPE C VALUE 'E'. "#EC *
CONSTANTS C_SAP(3) TYPE C VALUE 'SAP'. "#EC *
CONSTANTS C_MOD(3) TYPE C VALUE 'MOD'. "#EC *
CONSTANTS C_MD1(3) TYPE C VALUE 'MD1'. "#EC *
CONSTANTS C_MD2(3) TYPE C VALUE 'MD2'. "#EC *
CONSTANTS C_MD3(3) TYPE C VALUE 'MD3'. "#EC *
CONSTANTS C_MD4(3) TYPE C VALUE 'MD4'. "#EC *
CONSTANTS C_MD5(3) TYPE C VALUE 'MD5'. "#EC *
constants: c_000001(6) type c value '000001', "#EC *
c_e1cuv1m(7) type c value 'E1CUV1M', "#EC *
c_02(2) type c value '02', "#EC *
c_009(3) type c value '009', "#EC *
c_0001(4) type c value '0001'. "#EC *
constants: c_e1datem(7) type c value 'E1DATEM'. "#EC *
constants: c_e1cuvtm(7) type c value 'E1CUVTM'. "#EC *
GLOBAL INTERNAL TABLES FOR ALV DISPLAY
*Internal tables for ALV Field cat
DATA :
i_fieldcat_ov TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_dtl TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_ov1 TYPE lvc_t_fcat, "#EC *
i_events TYPE slis_t_event. "#EC *
GLOBAL WORK AREAS FOR ALV DISPLAY
*Work area for ALV Field layout
DATA : wa_layout TYPE slis_layout_alv. "#EC *
*Work area for Field Cat. Table
DATA : wa_fieldcat TYPE slis_fieldcat_alv. "#EC *
GLOBAL VARIABLES FOR ALV DISPLAY
DATA : g_event TYPE slis_t_event. "#EC *
DATA : g_top_of_page TYPE slis_t_listheader. "#EC *
DATA : g_ok_code TYPE char4. "#EC *
DATA : g_variant type disvariant. "#EC *
GLOBAL CONSTANTS FOR ALV DISPLAY
BAL handling
data: iv_log_handle type BALLOGHNDL. "#EC *
data: is_log_header type bal_s_log. "#EC *
data: iv_object type bal_s_log-object value 'CAPI'. "#EC *
data: iv_subobject type bal_s_log-subobject value 'CAPI_LOG'."#EC *
data: iv_tcode type bal_s_log-altcode value 'SE38'. "#EC *
*MOD-005
RANGES:
R_MESTYP FOR EDIDC-MESTYP, "#EC *
R_CREDAT FOR EDIDC-CREDAT, "#EC *
R_CRETIM FOR EDIDC-CRETIM, "#EC *
R_SNDPRT FOR EDIDC-SNDPRT, "#EC *
R_SNDPRN FOR EDIDC-SNDPRN. "#EC *
DATA:
L_MESSTYPE TYPE TUMLS_MESSTYPE. "#EC *
*MOD-005
data: p_sndprn TYPE EDI_SNDPRN, "#EC *
p_sndprt TYPE EDI_SNDPRT, "#EC *
p_sndpor TYPE EDI_SNDPOR. "#EC *
data: p_rcvprn TYPE EDI_RCVPRN, "#EC *
p_rcvprt TYPE EDI_RCVPRT, "#EC *
p_rcvpor TYPE EDI_RCVPOR. "#EC *
data:
init_E1CUVTM type E1CUVTM, "#EC *
prev_E1CUVTM type E1CUVTM, "#EC *
init_E1DATEM type E1DATEM, "#EC *
prev_E1DATEM type E1DATEM, "#EC *
init_E1CUV1M type E1CUV1M, "#EC *
prev_E1CUV1M type E1CUV1M. "#EC *
Source structure definitions
data:
begin of LSMW_TAB_CONTENT, "#EC *
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
end of LSMW_TAB_CONTENT.
Counters
data:
g_cnt_VAR_TAB type i, "#EC *
g_cnt_TAB_CONTENT type i. "#EC *
Counter ct_xxxxxxxxxx: number of transferred records
data:
ct_edi_dc40 type i, "#EC *
cs_edi_dc40 type i, "#EC *
ct_E1CUVTM type i, "#EC *
cs_E1CUVTM type i, "#EC *
ct_E1DATEM type i, "#EC *
cs_E1DATEM type i, "#EC *
ct_E1CUV1M type i, "#EC *
cs_E1CUV1M type i. "#EC *
Global data definitions and data declarations
DATA: wa_cabn TYPE ty_cabn,
wa_cawn TYPE ty_cawn,
wa_file TYPE ty_file,
wa_vtnam TYPE ty_vtnam,
wa_cuvtab_fld TYPE ty_cuvtab_fld,
wa_cuvtab_valn TYPE ty_cuvtab_valn,
wa_cuvtab_valc TYPE ty_cuvtab_valc,
wa_col_pos TYPE ty_col_pos,
wa_error TYPE ty_error,
wa_dupl TYPE ty_dupl,
wa_dupl_file TYPE ty_dupl.
DATA: wa_vnt_ma TYPE ty_vnt_ma,
wa_split TYPE ty_split.
DATA: wa_charval TYPE ty_charval. "#EC *
Internal table
DATA: i_cabn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_temp TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_atinn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_file TYPE STANDARD TABLE OF ty_file, "#EC *
i_file_tmp TYPE STANDARD TABLE OF ty_file, "#EC *
i_vtnam TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab_fld TYPE STANDARD TABLE OF ty_cuvtab_fld, "#EC *
i_cuvtab_valn TYPE STANDARD TABLE OF ty_cuvtab_valn, "#EC *
i_cuvtab_valc TYPE STANDARD TABLE OF ty_cuvtab_valc, "#EC *
i_col_pos TYPE STANDARD TABLE OF ty_col_pos, "#EC *
i_cawn TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_n TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_c TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_i TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cuv_error TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_dupl TYPE STANDARD TABLE OF ty_dupl, "#EC *
i_dbtab TYPE STANDARD TABLE OF ty_dbtab. "#EC *
DATA: i_vnt_ma TYPE STANDARD TABLE OF ty_vnt_ma, "#EC *
i_split TYPE STANDARD TABLE OF ty_split. "#EC *
DATA: i_dupl_file TYPE STANDARD TABLE OF ty_dupl. "#EC *
DATA: i_charval TYPE STANDARD TABLE OF ty_charval. "#EC *
Constants
CONSTANTS: c_char TYPE atfor VALUE 'CHAR', "#EC *
c_date TYPE atfor VALUE 'DATE', "#EC *
c_time TYPE atfor VALUE 'TIME', "#EC *
c_varcond TYPE atnam VALUE 'Z_VARCOND'. "#EC *
Field Symbols
FIELD-SYMBOLS: <fs_vtnam> TYPE ty_vtnam, "#EC *
<fs_cabn> TYPE ty_cabn, "#EC *
<fs_cuvtab_fld> TYPE ty_cuvtab_fld, "#EC *
<fs_dupl> TYPE ty_dupl. "#EC *
FIELD-SYMBOLS: <FS_DYN_WA> TYPE ANY.
Variables
DATA: g_raw(500) TYPE c, "#EC *
g_invalid TYPE char1, "#EC *
g_error TYPE char1, "#EC *
g_message TYPE char50, "#EC *
g_slnid_c TYPE slnid, "#EC *
g_slnid_n TYPE slnid, "#EC *
g_row TYPE char5. "#EC *
DATA: g_varcond TYPE varcond, "Variant condition "#EC NEEDED
g_split_var TYPE i, "#EC *
g_split_var1 type i. "#EC *
Types: begin of ty_charname,
name type atnam,
end of ty_charname.
data: wa_charname type ty_charname, "#EC *
i_charname type standard table of ty_charname. "#EC *
data: cnt_i type i, "#EC *
g_tabix type char10. "#EC *
Types: begin of ty_itab_zedidc40.
include structure edi_dc40.
TYPES: end of ty_itab_zedidc40.
Types: begin of ty_itab_zedidd40.
include structure edi_dd40.
TYPES: end of ty_itab_zedidd40.
DATA: itab_zedidc40 type standard table of
ty_itab_zedidc40 initial size 0. "#EC *
DATA: itab_zedidd40 type standard table of
ty_itab_zedidd40 initial size 0. "#EC *
DATA: wa_itab_zedidc40 type ty_itab_zedidc40. "#EC NEEDED
DATA: wa_itab_zedidd40 type ty_itab_zedidd40.
*MOD-009
data: itab_ze1cuvtm type e1cuvtm, "#EC *
itab_ze1datem type e1datem, "#EC *
itab_ze1cuv1m type e1cuv1m. "#EC *
data: wdocnum(16) type n value 0. "#EC *
data: wsegnum(6) type n value 0. "#EC *
data: witemno(10) type n value 0. "#EC *
data: witemno_new(10) type n value 0. "#EC *
data: witemno_gst(10) type n value 0. "#EC *
data: witemno_qst(10) type n value 0. "#EC *
TYPES: BEGIN OF ty_input_data1, "#EC *
line(560) type c,
flag(1) type c,
END OF ty_input_data1.
DATA: i_input_data type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: i_input_data1 type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: wa_input_data type ty_input_data1. "#EC *
DATA: g_cnt_input_recs type i. "#EC *
DATA: g_flg_error type c. "#EC *
DATA: l_lines type i. "#EC *
DATA: l_lines1 type i. "#EC *
DATA: l_tabix type i. "#EC *
DATA: wa_input_data1 type ty_input_data1. "#EC *
DATA: FILE TYPE STRING.
Fields that are made available to the user:
DATA:
g_cnt_records_read TYPE i, "#EC *
g_cnt_records_transferred TYPE i, "#EC *
g_cnt_transactions_read TYPE i, "#EC *
g_cnt_transactions_transferred TYPE i, "#EC *
g_cnt_idocs_package TYPE i. "#EC *
data: v_log_handle type balloghndl. "#EC *
DATA: gt_curr_edi_dc40 TYPE STANDARD TABLE OF edi_dc40 initial size 0."#EC *
DATA: gt_curr_edi_dd40 TYPE STANDARD TABLE OF edi_dd40 initial size 0."#EC *
DATA: wa_curr_edi_dc40 TYPE edi_dc40. "#EC *
DATA: wa_curr_edi_dd40 TYPE edi_dd40. "#EC *
internal table for error messages during conversion
DATA: g_error_tab TYPE type_errortab, "#EC *
wa_errortab TYPE type_errorline. "#EC *
DATA: g_edidd_segnam type EDI4SEGNAM, "#EC *
g_edidd_hlevel type EDI4HLEVEC. "#EC *
DATA: g_segnum(6) TYPE n.
DATA: g_objecttype(2) type C.
DATA: P_FNAME(128) TYPE C VALUE '/usr/sap/trans/vartabheader'. " MODIF ID MD1 OBLIGATORY.
DATA: P_FNAME1(128) TYPE C VALUE '/usr/sap/trans/vartabcontent'. " MODIF ID MD1 OBLIGATORY.
field-symbols: <dyn_table> type standard table,
<dyn_table1> type standard table,
<dyn_wa>,
<dyn_wa1> TYPE ANY.
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
data: l_tabname TYPE tabname.
DATA: l_len_slnid TYPE i, "#EC NEEDED
l_len_varcond TYPE i, "#EC NEEDED
l_temp_slnid TYPE i, "#EC NEEDED
l_temp_slnc TYPE char5, "#EC NEEDED
l_temp_varcond TYPE varcond, "#EC NEEDED
l_sub_var TYPE i, "#EC NEEDED
l_val_split TYPE char10. "#EC NEEDED
DATA: l_invalid. "#EC NEEDED
*Include for Global Data Declaration
*INCLUDE ZGTDMI_VARTAB_TOPDYN.
*INCLUDE /FACTGLB/GTDMI_VARTAB_TOP02.
*Include for Selection Screen
*INCLUDE ZGTDMI_VARTAB_SELDYN.
*INCLUDE /FACTGLB/GTDMI_VARTAB_SEL02.
*Include for Sub Routines
*INCLUDE ZGTDMI_VARTAB_FORMSDYN.
*INCLUDE /FACTGLB/GTDMI_VARTAB_FORMS02.
*& Include /FACTGLB/GTDMI_VARTAB_SEL02 *
*& Include /FACTGLB/GTDMI_VARTAB_SEL
*& Include /FACTGLB/GTDMI_VARTAB_SEL
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-08-25
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
DECLARATION FOR SELECTION SCREEN
*selection-screen skip 1.
*For all the input field entries
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
*Parameter for Input File Name:
PARAMETERS: p_inpt TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File Variant table
PARAMETERS: p_inpt1 TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File variant Content
SELECTION-SCREEN END OF BLOCK bl1.
IDoc creation
selection-screen begin of block idocpars
with frame title text-006.
parameters:
p_trfcpt as checkbox default C_X MODIF ID MD3,
p_packge(5) type n default 1 MODIF ID MD3.
selection-screen end of block idocpars.
SELECTION-SCREEN BEGIN OF BLOCK bl3 WITH FRAME TITLE text-032.
Radio Buttons :
parameters:
rb_apsrv RADIOBUTTON GROUP RB1 DEFAULT 'X' USER-COMMAND UCOM,
rb_convt RADIOBUTTON GROUP RB1,
rb_idoc RADIOBUTTON GROUP RB1.
rb_proc RADIOBUTTON GROUP RB1.
SELECTION-SCREEN END OF BLOCK bl3.
INITIALIZATION
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INPT.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = C_X
CHANGING
FILE_NAME = P_INPT
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE e241.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INPT1.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = C_X
CHANGING
FILE_NAME = P_INPT1
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
-
How to pass values in dynamic structure and then dynamic table
Hi,
we have a Z structure in se11 holding 10 fields. But at run time i need to create a dynamic table with more than 10 records.
I am able to create the structure and corresponding internal table. Now the issue is i have to populate this dynamic structure with some values and then append it to dynamic internal table. Since the dynamic table type is any its not allowing an index operation like modify etc etc.
Could anyone help me in passing the values . I have searched in SDN . everyone created a dynamic table and then populated it values from some standard or custom tables.Then assigning the component of structure and displaying the output. but in my situation i have no such values stored in any tables. i populate values based on certain calculation.Hi Friends,
This is the piece of code.After creating dynamic work area and dynamic table what i should do?
TYPES: BEGIN OF STR,
ID TYPE I,
NAME(30) TYPE C,
END OF STR.
data: v_lines type i.
STR_TYPE ?= CL_ABAP_TYPEDESCR=>DESCRIBE_BY_NAME( 'STR' ).
STR_COMP = STR_TYPE->GET_COMPONENTS( ).
APPEND LINES OF STR_COMP TO COMP_TAB.
COMP-NAME = 'NAME1'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'VALUE1'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'NAME2'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'VALUE2'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'NAME3'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'VALUE3'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
NEW_STR = CL_ABAP_STRUCTDESCR=>CREATE( COMP_TAB ).
NEW_TAB = CL_ABAP_TABLEDESCR=>CREATE(
P_LINE_TYPE = NEW_STR
P_TABLE_KIND = CL_ABAP_TABLEDESCR=>TABLEKIND_STD
P_UNIQUE = ABAP_FALSE ).
CREATE DATA DREF TYPE HANDLE NEW_TAB.
CREATE DATA DREF1 TYPE HANDLE NEW_str. -
Dynamic table from an structure
Hi,
I want to create one alv grid using function REUSE_ALV_GRID_DISPLAY,for this i have passing the fieldcatalog to slis_t_fieldcat_alv.i have been passing my fieldnames ,and col,sel_text_m to fieldcatalog.instead of passing the fields can we assign fields catalog dynamically from the structure.....i have all the fieldnames in one structure for to be displayed in alv list.
pls read the below for reference....
DATA : BEGIN OF wa_inv,
lifnr LIKE rbkp-lifnr,
belnr LIKE rbkp-belnr,
bldat LIKE rbkp-bldat,
END OF wa_inv.
fieldcatalog-fieldname = 'LIFNR'.
fieldcatalog-seltext_m = 'Vendor'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-sp_group = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
*.....this following part will be avaid ..and it should *..be assigned to dynamically
fieldcatalog-fieldname = 'BELNR'.
fieldcatalog-col_pos = 1.
fieldcatalog-seltext_m = 'Invoice No'.
fieldcatalog-key = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'BLDAT'.
fieldcatalog-seltext_m = 'Invoice Date'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = gd_repid
IS_LAYOUT = gd_layout
IT_FIELDCAT = fieldcatalog[]
PrakashHi ,
here's an example for fm REUSE_ALV_FIELDCATALOG_MERGE
-> fields of itab must be defined with like not with type!
DATA : BEGIN OF itab1,
f1 LIKE vbak-vbeln,
f2 LIKE vbap-posnr,
f3 LIKE vbak-netwr,
END OF itab1.
rep = sy-repid.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = rep
i_internal_tabname = 'ITAB1'
i_client_never_display = 'X'
i_inclname = rep
CHANGING
ct_fieldcat = fcat.
regards Andreas -
Defining table from DDIC-structure dynamically
Hi folks!
Does anybody know whether it is possible to build an internal table from DDIC-structures dynamically?
I have a deep structured itab_upload(whose structure is defined in the DDIC), which contains 2 fields(Number Name) and a third field which contains itab_desc.
This itab_desc can contain either 2 fields(Number Name) and a third field which contains another itab_desc <b>or</b> 3 fields for numbers(without any other itab).If itab_desc contains another itab_desc, the second itab_desc contains only 3 fields for numbers and names...
help will be very appreciated and points will be rewarded!
FelixHi Felix,
Please find below the material which will help you to solve your problem :-
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b332e090-0201-0010-bdbd-b735e96fe0ae
Please reward points if helpful.
Regards.
Srikanta Gope.
[email protected] -
Error in dynamic node creation ..........
Hi experts,
I am creating a node dynamically in WDDOINT and creating an input field in WDDOMODIFYVIEW , but am getting an error "attribute not found". Am pasting below my code...
Code in WDDOINT of a view :
data lr_par_node type ref to IF_WD_CONTEXT_NODE_INFO.
data lr_node type ref to IF_WD_CONTEXT_NODE_info.
data lr_node_info1 type ref to IF_WD_CONTEXT_NODE_INFO.
data lr_node1 type ref to IF_WD_CONTEXT_NODE.
data lr_attribute type WDR_CONTEXT_ATTRIBUTE_INFO.
data lt_child_node_map type wdr_context_child_info_map.
*****to get context parent node information
lr_par_node = wd_context->get_node_info( ).
*****to get child node of the parent
lt_child_node_map = lr_par_node->get_child_nodes( ).
*****check for the existence of node
read table lt_child_node_map transporting no fields with table key name = `RESULT`.
if sy-subrc = 0.
" REMOVE_CHILD_NODE
lr_par_node->remove_child_node( `RESULT` ).
endif.
*****inserting new node in context
CALL METHOD lr_par_node->ADD_NEW_CHILD_NODE
EXPORTING
NAME = 'RESULT'
* IS_MANDATORY = ABAP_FALSE
* IS_MANDATORY_SELECTION = ABAP_FALSE
IS_MULTIPLE = ABAP_TRUE
IS_MULTIPLE_SELECTION = ABAP_TRUE
* IS_SINGLETON = ABAP_FALSE
IS_INITIALIZE_LEAD_SELECTION = ABAP_false
* STATIC_ELEMENT_RTTI =
IS_STATIC = ABAP_TRUE
* ATTRIBUTES =
* IS_RANGE_NODE =
RECEIVING
CHILD_NODE_INFO = lr_node.
lr_node1 = wd_context->get_child_node( name = 'RESULT' ).
lr_node_info1 = lr_node1->GET_NODE_INFO( ).
*********Adding attribute
lr_attribute-NAME = 'TEST_GROUP'.
lr_attribute-TYPE_NAME = 'PLNNR'.
lr_attribute-NODE_INFO = lr_node_info1.
CALL METHOD lr_node_info1->ADD_ATTRIBUTE
EXPORTING
ATTRIBUTE_INFO = lr_attribute.
clear lr_attribute.
Code in the WDDOMODIFYVIEW :
method WDDOMODIFYVIEW .
if first_time = abap_true.
data : lt_header_block type zcdp_tt_mfte_header.
lt_header_block = WD_COMP_CONTROLLER->MT_HEADER_BLOCK.
DATA :lr_container TYPE REF TO cl_wd_uielement_container,
lr_input TYPE REF TO cl_wd_input_field,
lr_caption type ref to CL_WD_CAPTION,
lr_column type ref to CL_WD_TABLE_COLUMN,
lr_trans_cont TYPE REF TO CL_WD_TRANSPARENT_CONTAINER.
data lr_lbl type ref to CL_WD_TEXT_VIEW.
******to get root element container
lr_container ?= view->get_element( 'ROOTUIELEMENTCONTAINER' ).
lr_trans_cont ?= VIEW->GET_ELEMENT('TRANS_CONT_HEADER_BLOCK').
* Created one transparent container in the view.......
CALL METHOD CL_WD_TEXT_VIEW=>NEW_TEXT_VIEW
EXPORTING
* CONTEXT_MENU_BEHAVIOUR = E_CONTEXT_MENU_BEHAVIOUR-INHERIT
* CONTEXT_MENU_ID =
* DESIGN = E_DESIGN-STANDARD
* ENABLED = 'X'
* H_ALIGN = E_H_ALIGN-AUTO
* ID =
* LAYOUT = E_LAYOUT-NATIVE
* SEMANTIC_COLOR = E_SEMANTIC_COLOR-STANDARD
TEXT = 'TEST'
* TEXT_DIRECTION = E_TEXT_DIRECTION-INHERIT
* TOOLTIP =
* VIEW =
* VISIBLE = E_VISIBLE-VISIBLE
* WIDTH =
* WRAPPING =
RECEIVING
CONTROL = lr_lbl
cl_wd_matrix_head_data=>new_matrix_head_data(
element = lr_lbl ).
lr_trans_cont->ADD_CHILD( lr_lbl ).
CALL METHOD CL_WD_INPUT_FIELD=>NEW_INPUT_FIELD
EXPORTING
BIND_VALUE = 'RESULT.TEST_GROUP'
ENABLED = 'X'
* EXPLANATION =
ID = 'ABCD'
RECEIVING
CONTROL = lr_input.
cl_wd_matrix_data=>new_matrix_data(
element = lr_input ).
lr_trans_cont->ADD_CHILD( lr_input ).
endif.
endmethod.
Pls help me in this.....
Thanks
Aisurya.Hi,
looking at code it seems that you are adding textview and inputfield. please check in debugging if the correct context node/attribute is being created and you are providing its reference while adding UI elements.
Thanks,
Chandra -
Node creation and addition to existing Element Node
Hi all,
I have a class that opens a xml file, loads the Document and then, from a method, I am trying to add sub nodes to one of the Element node from the XML document. It just doesn't work.
This is the method that is supposed to add the nodes:
public Node getSubNode( Node iCurrentNode )
// Method local variables
DocumentBuilder lBuilder = null;
Document lDocument = null;
DocumentBuilderFactory lFactory = DocumentBuilderFactory.newInstance();
// Prepare the document and final Node to return
lBuilder = lFactory.newDocumentBuilder();
lDocument = lBuilder.newDocument();
Element lSubMenu = lDocument.createElement("sub_menu");
lSubMenu.setAttribute("ID", "User20");
lSubMenu.setAttribute("label", "Montreal user 1");
iCurrentNode.appendChild( lSubMenu );
lSubMenu = lDocument.createElement("sub_menu");
lSubMenu2.setAttribute("ID", "User21");
lSubMenu2.setAttribute("label", "Montreal user 2");
lDocument.appendChild(lSubMenu2);*/
return iCurrentNode;
I always get a "org.apache.crimson.tree.DomEx: WRONG_DOCUMENT_ERR: That node doesn't belong in this document."
So I understand by this that I am working with a Document that I declared in this method and thus, for an unknown reason, seem unable to add this node to my existing Element node.
What should I do to be able to add these nodes to my input Node?
Dominique PaquinOk, to answer my own question, and for the benefit of future people searching here for an answer, I'd used 2 different Document instance for the creation of my 2 nodes, one for the creation of the basic Node structure and one for the creation of the node that would be added to the other one. Since the importNode (done on the first one ) removes the parent from the imported node, I was no longer in a position to access the parent reference.
I simply created a single Document in my class as a global variable and used this single entity to create all my nodes (the original and the one added to the original), It solved all my problems.
I don't know if I was clear anough but if you need further explanation drop me a line.
[email protected]
http://www.okiok.com -
Please help! Invalid node structure and invalid record count
My MacBook Pro is about 6.5 years old. I upgraded to Snow Leopard 2 years ago and added RAM at the same time. My first problem ever occurred three days ago when my computer got super sluggish, I restarted and got the gray screen with apple and spinning wheel...no boot up. I ran disk utility from the snow leopard install disk and found "invalid node structure" and "invalid record count". After reading on here what to do...try to repair the disk and so on with no success I went out and bought Disk Warrior. Got home expecting to fix everything and Disc Warrior won't boot...I just get a file with a question mark and the disc is ejected. I tried erasing the hard drive but was only able to use the "don't erase data" option. Then I tried to reinstall Snow Leopard with no luck. Now I am stuck. Any ideas?
One thing to note is I am to the point of not caring about the files on the hard drive, I was a dummy and never backed them up...lesson learned! I just want my computer back without having to spend $1000+ for a new one. Then again I am always willing to do that too as a last resort.
PLEASE HELP!When you contact Alsoft, make sure you let them know that you are using Snow Leopard (10.6.8).
Try the following in the meantime -
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
Try DiskWarrarior again if it's combatible with the os system.
YOu cannot reformat until you get your issue corrected. -
Huge problems with my MacBook: Invalid Node Structure and More!
A couple days ago I was browsing the internet, and when I closed Safari, the system froze. I couldn't even force quit out of anything, so I had to shut it off manually. When I tried to turn my computer back on the next day, I couldn't get past the Apple screen. The little wheel would keep spinning, but I could never get anywhere.
Then, I tried to boot from the Leopard DVD to possibly reinstall Leopard, hoping it would work. At first, no drives would show up to install to, but for some reason, they eventually showed up. Problem is, I don't have enough free memory to reinstall Leopard. Furthermore, I've tried to fit it on the space I have, and it says that the install failed, so I can't reinstall Leopard.
I also went to Disk Utility from the DVD and tried to repair the disk. The only option available was to Verify Disk, but when I go there, that fails, and it says "invalid node structure."
I'm not sure what happened to my computer because it seemed to come from nowhere. To sum up, I cannot log in to OS X, or even XP on a separate partition, I can't reinstall Leopard, and I can't repair the disk. I've read about how DiskWarrior might help, but I can't get in to OS X. Does anyone have any idea what happened or what I can do? I haven't backed anything up, so if I'm screwed, then so be it, I guess. Just wondering if anyone has any explanations or suggestions. Thanks.Interesting how many people have this same issue. A friend of mine has brought me her white Macbook Intel Core 2 with Leopard and it had a folder with a question mark instead of the apple at startup. I was able to boot using the Mac Install DVD and ran Disk Utility. It said something like "Invalid Node Structure" and "Cannot Repair". Unfortunately DiskWarrior will not fix this. I tried it to no avail. I'm resigned to the fact that a new hard drive is necessary.
The HD in there is a Hitachi 120GB.
It also wouldn't let me erase the disk nor partition it. Then, one morning I woke up and it was able to erase! So I erased, then installed Tiger. It seemed to be working fine. So I rebooted from the Leopard drop-in disk and installed Leopard. Then I restarted, and BAM! back to the question mark folder. Now I'm back to where I started. Other threads
I forgot to mention that my friend had photos and music on the HD that she couldn't do without and I was able to recover that data using Data Recover II. First I had to use SuperDuper to clone my own computer onto an external drive so I could use it as a boot drive.
For now the only solution is to buy a new internal hard drive and reinstall the OS. And regularly backup!!
So I guess this issue has not really been solved, but hopefully you have warranty. Unfortunately for my friend, this happened a week after her warranty expired.
Good luck. -
How to retreive data from a table and a structure
Hi experts,
I have a requirement to create an ALV report. I have to include fields from two tables 'PA0001' and 'CATSDB' and from one structure 'CATSAPPR'. I am able to retrieve data from tables using INNERJOIN. But i have no idea how to deal with Structure.
I know that structure does not contain any data.
But i am not able to find any transparent table which has field 'ORDERTEXT' . I found field 'ORDERTEXT' only in structure 'CATSAPPR'.
So please anyone tell me, either any transparent table which has field 'ORDERTEXT' or please tell me how to deal with structure, in this case.
Please help me,
Thanks in advance
Anucheck this
Table-Fields Short descriptn
AUFK- KTEXT Order master data
COCH- KTXT Process Management: Control Recipe Header
COCHP- KTXT PI sheet: Control Recipe Header
COMPHDR- KTEXT OCM: Comparison results, indiv. records for order headers
HIKO- KTEXT Order master data history
MAAVC_MDO- KTEXT MPO: Individual Master Data for Orders
MCHPVS- AUFTEXT Batch Record: Shadow Table for Link to Archive
OCMHOMO_ARCH- KFELD Backup Table of Homogeneity List in Case of Archiving
PSJHIEDATA- KTEXT Hierarchy data to test LDB PSJ
TEWOCODEST- DESCRIPTION Order Codes (Texts)
TEWOCODET- KTEXT Allocation of Message Codes to Order
VLCSMORDER- KTEXT VELO : Service Order
VSAUFK_CN- KTEXT Version: Order master data
Yogesh N -
Hello Friends,
To display the field on the View, we can create the field via 3 ways:
1) By creating the model attribute
2) By creating the model node using the GENIL object and using its attributes in view
3) Creating the field in Database structure using AET
But, i am not aware that in exactly what kind of business scenarios we use the above 3 methods to create the field.
Could you help me out to clarify the same.Hi Dev,
1). By creating the model attribute: we will use this option in case of the field is avaibla in stanadrd sap system. It might be in another under child context nodes and we will use BOL relations to access the attribute.
2). By creating the model node using the GENIL object and using its attributes in view: We will use this option incase of there is no standard provision to use. Means you want to create any custom assignment block with custom attributes then you can go for this option. More over we can use AET to create custom genil object. We have an option Create Table in AET.
3).Creating the field in Database structure using AET: We will use this option incase of there is no attribute in database relevant to your requirement then we will go for AET enhancement.
Hope this might give you little clarification..
Best Regards,
Dharmakasi. -
FDS and Hibernate dynamic mapping
I am using FDS with hibernate
(flex.data.assemblers.HibernateAssembler) to transfer data between
the flex client and my JDBC database. This works really smooth, as
long as I specify a server-side java class (POJO) in the
<hibernate-mapping><class name="some.class"> attribute.
As I dont really need these server-side java classes for
anything else, I have tried to save some work by using the
hibernate "dynamic-map" mode (<hibernate-mapping><class
entity-name="some.entity">). But in this case, FDS does not map
the result to the corresponding flex ActionScript class with the
correct RemoteClass alias. The DataService "fill" method returns an
ArrayCollection of "ManagedObjectProxy" items containing the field
"$type$=some.entity" instead.
Does FDS support hibernate dynamic mapping? Is there a
workaround for this problem?
Best,
PerHi Per,
The Hibernate assembler doesn't currently support the
dynamic-map mode, so for now you'll need your POJOs.
Best,
Seth
Maybe you are looking for
-
Adding column is taking much time. How to avoid?
ALTER TABLE CONTACT_DETAIL ADD (ISIMDSCONTACT_F NUMBER(1) DEFAULT 0 NOT NULL ,ISREACHCONTACT_F NUMBER(1) DEFAULT 0 NOT NULL Is there any way that to speed up the execution time of the query? It's more than 24 hrs completed after started running the a
-
I created a BSP with the following values. Staff Contractor Staff/Contractor Role Staff/Contractor No Name Contact No staff/contractor : radiobutton Staff/Contractor Role -char 40 Staff/Contractor No -char10 Name - char40 Contact No
-
hello. I am using Lumia 930. I did a reset of my device after which I get error message when I try to download music. I can listen to online mixes but not able to download. Before resting the device everything was perfect. I do have a valid subscript
-
Receiving Transaction processor with Receipt Traveller Concurrent program
Hi We have customized Receipt Traveller Concurrent program (Customized) to get rich Publiishing features using BI Publisher Reports technology. For some receipts we are getting blank page, on observation we noticed that When Receipt Traveller Concurr
-
Hi, I am using IE 6.0 sp2 and get the following Javascript error when I go to 'Mail' tab from 'Calendar' tab Javascript Error http://<server>/uwc/webmail/mbox_fs_lr.jsp?&rev=3&security=false&lang=en&popuplevel=undefined&cal=1&charset=escaped_unicode,