Dynamic Parameter Prompting for Database Connection Password
Post Author: rsharp
CA Forum: Publishing
Hi
I've been finding recently that reports using dynamic parameters and published into Crystal Server prompt for the database connection password when the dynamic parameter is accessed. Thing is, this only started happening recently for new and already existing reports with dynamic parameters and I don't know why. In Crystal Reports the dynamic parameter can be accessed without a database connection prompt being displayed but not after publishing. (Maybe there's a problem with the Publishing Wizard?) Static parameters work just fine just as they always have, but I'm a bit mystified by the fact that dynamic parameters used to work (without prompting) but now they don't. Any advice or opinion would be much appreciated.
Post Author: amr_foci
CA Forum: Publishing
from the CMC you have to set the default connection or wat connection should this report use,
go to this report in CMC, click process tab, and check the connection
Similar Messages
-
Dynamic Parameter Prompting for Database Connection Password When schedulin
I'm having problems with Dynamic Parameters when I try to schedule a report in InfoView.
I create the report in Crystal Reports XI and publish it to the Crystal Server. I go into CMC and under Process:Database set the correct data source and enter the server, database, user and password.
When the report is run I can choose a dynamic parameter and the reports runs fine - it's when I try to schedule the report and choose the parameter that I am asked to enter the user and password for the database.
If the parameter is static it's fine and I don't get prompted. Because I want the end-users to schedule their own reports I need to have the user and password embedded in the report.
From what I've read in the forums, there seems to be a lot of issues with dynamic parameters and database logons, and no real solutions. But this is just weird that it's only failing when I try to schedule the report!I am having the same issue.
Issue started on 9/25/2008
Existing BO 11r2 installation including service pack 2
Windows Server 2003 Service pack 2
Existing scheduled reports do not exhibit this behaviour and run correctly.
Add new or update existing report. Log into the CMC as administrator and set process for database and parameters.
Exit CMC
log into Infoview. Click on report and run (as administrator OR as existing user with permissions) NO PROBLEM.
Log into Infoview as Administrator or existing users with permissions) as attempt to schedule report. All reports Any dynamic parameter and request for user name and password opens. Once the correct info is entered the report can be scheduled.
This is a new issue on our installation, we have been running without problems for over a year.
Any help appreciated. -
Report in production prompts for database connection info
Hi,
I'm using SAP Crystal Reports version for VS 2010 SP1. I'm trying to implement the most basic need--to create reports in a development environment and move them to production by just copying the .rpt files. I want to rely on the database connection string from web.config, but don't see how that is done. I've tried using ADO.NET DataSets from Project Data and can get the report to run while developing, but when I move to another server I'm always prompted with the "The report you requested requires further information" dialog.
I tried this solution, which keeps the db server name in a web.config variable:
ReportDocument boReportDocument = new ReportDocument();
boReportDocument.Load(Server.MapPath(rmCR.SelectedItem.Value.ToString()));
ConnectionInfo boConnectionInfo = new ConnectionInfo();
boConnectionInfo.ServerName = ConfigurationManager.AppSettings["dbServerName"];
boConnectionInfo.DatabaseName = "dbCMRP_Employees";
boConnectionInfo.IntegratedSecurity = true;
ModifyConnectionInfo(boReportDocument.Database, boConnectionInfo);
// Modify the ConnectionInfo for all tables in all subreports
foreach (ReportDocument boSubreport in boReportDocument.Subreports)
ModifyConnectionInfo(boSubreport.Database, boConnectionInfo);
Session.Add("Report", boReportDocument);
Response.Redirect("CrystalReportsViewer.aspx");
and this works fine in development, but when moved to a different server I get the "The report you requested requires further information" dialog. I've made sure that the db has the correct security settings, but can't find anything missing.
I'm sure I'm missing something basic, but can't seem to find any solution after searching for days. Any solution that allows me to create the report in VS 2010 and copy to a production server will be appreciated.
Thanks,
DanThanks for your replies.
I think I've done what's outlined in the Troubleshooting Guide link that Ludek gave me. I did install Process Monitor and found the "Access Denied" entry, but I'm not sure which folder needs permission given to IIS APPPOOL\ASP.NET v4.0.
Here's the entry from Process Monitor:
Description: IIS Worker Process
Company: Microsoft Corporation
Name: w3wp.exe
Version: 7.5.7601.17514
Path: C:\Windows\SysWOW64\inetsrv\w3wp.exe
Command Line: C:\Windows\SysWOW64\inetsrv\w3wp.exe -ap "ASP.NET v4.0" -v "v4.0" -l "webengine4.dll" -a
.\pipe\iisipm461f344a-3d68-4e7c-b42e-ca18eac4553c -h "C:\inetpub\temp\apppools\ASP.NET v4.0\ASP.NET v4.0.config" -w "" -m 0 -t 20
PID: 7512
Parent PID: 3892
Session ID: 0
User: IIS APPPOOL\ASP.NET v4.0
Auth ID: 00000000:00465886
Architecture: 32-bit
Virtualized: False
Integrity: High
Started: 8/29/2011 1:03:58 PM
Ended: (Running)
Modules:
w3wp.exe 0x120000 0x8000 C:\Windows\SysWOW64\inetsrv\w3wp.exe Microsoft Corporation 7.5.7601.17514
Microsoft.Web.Administration.dll 0x28ae0000 0x24000 C:\Windows\assembly\GAC_MSIL\Microsoft.Web.Administration\7.0.0.0__31bf3856ad364e35\Microsoft.Web.Administration.dll Microsoft Corporation 6.1.7601.17514
App_Web_822ce1a1f503e532a2e860f7ce344f6d0d0f2eba.ascx.3417f053.eb4fk61t.dll 0x28b10000 0x8000 C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\intranet\58a686e6\86baa618\App_Web_822ce1a1f503e532a2e860f7ce344f6d0d0f2eba.ascx.3417f053.eb4fk61t.dll n/a 0.0.0.0
App_Web_aed28e8a45aa161f6c9fc3f563283cb89b317bdc.ascx.3417f053.rodqolhn.dll 0x28c90000 0x8000 C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\intranet\58a686e6\86baa618\App_Web_aed28e8a45aa161f6c9fc3f563283cb89b317bdc.ascx.3417f053.rodqolhn.dll n/a 0.0.0.0
pvlocale-1-0.dll 0x2fc80000 0x76000 C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\pvlocale-1-0.dll SAP BusinessObjects 14.0.0.760
System.Data.Entity.ni.dll 0x2fd50000 0xcb8000 C:\Windows\assembly\NativeImages_v4.0.30319_32\System.Data.Entity\978e8514751373383f79c3fdd667aa2b\System.Data.Entity.ni.dll Microsoft Corporation 4.0.30319.1 -
Prompt for database logon information
I am using CRS XI R2 SP4 on Windows
I installed a report on the server and completed the datasource information and set the checkbox for using the same database info when report is run.
However when the run is run the user is prompted for database user/password the other fields such as database host and database name are read-only.
The only difference between this report and other reports that do not exhibit this behavior is that this report has a sub-report that uses a Command object
Please suggest ways to suppress the database login prompt.
Regards
Lawrencedid not receive a response to my question
-
Infoview prompts for database logon screen when updating dynamic parameter
I have already set up initial database ID/PW for the report in CMS, but when I I tried to update my parameter to schedule the report, it is requiring the user to enter database ID/PW again........Is there a way to set this up so that the user can bypass this step since it is quite annoying?
Thanks.Is your lov created Business View Manager? If it is, you can store the userid and password in the data connection your business view is based on.
1) Start Business View Manager. Close the default screen that appears.
2) Click View > Repository Explorer on the menu bar.
3) Expand the Dynamic Cascading Prompts folder. Locate the "Data Connection" for the appropriate dynamic parameter. It will be in the form of <parameter_name>_DC (i.e. it will have the name of the parameter and then '_DC').
4) Double-click the Data Connection. "Property Browser" will appear.
5) Type the database user name and password in that Property Browser.
6) Set the Runtime Prompt to Never Prompt.
7) Save the changes to the Data Connection.
The prompt for database logon information will no longer appear when changing parameter values.
Hitomi -
Connect To Server Hangs Before Prompting For Name And Password
Hi Everyone.
Connect to Server hangs for 25 seconds before prompting for name and password.
I am trying to access a share on a Windows 2008 R2 domain controller via a Mac running 10.6.8 (Snow Leopard) using SMB.
Example: smb://192.168.101.11/sharename
Once connected, browsing is fine - it's just the connecting that takes a long time.
I have specified port 139 and login name, I have disabled IP6 on the Mac, the Mac and Windows 2008 server are on the same LAN and are wired.
Again, once connected, browsing is fine - it's just the connecting that takes a long time.
Any help would be appreciated.
DamianSomething to add ...
Connecting to a Windows 2008 stand-alone server outside of the domain (e.g., workgroup) does not have the same problem - the name and password prompt shows immediately. -
Preview and print a Crystal report prompted for the sa password
Dear All,
Our customer has Crystal report add-on to be installed. When we Preview and print a Crystal report, we got a window prompted for the sa password. Even we type in a correct password, it still says wrong password...
Every time when I open my report in Crystal Basic 2008 on the server, then go database expert >> My connections >> click + in front of the connection name, it asks my sa password. I type in my password then save and close. Next time when I open the report and go my connections, I have to type in my password again. This only happens on one customer.
Any idea? Thanks a lot.
Regards,
YukaHi Yuka,
1) All their SAP client workstation, they have to have use SQL2008 CD and install SQL Client on it
Correct, MS does NOT support MDAC or WDAC when connecting to SQL 2008.
2) Then go ODBC >> SQL Native Client 10.0 >> Create a new connection to SAP server. Should we use sa user or another use that has the same authorization as sa?
Correct again if they are also using ODBC to connect, as for using the sa account or creating a new one is up to you. I suggest creating a Crystal account with what ever rights your app needs, this way if tracing it turned on etc. you can confirm who is actually running the report.
3) Then from MY Crystal report, I have to use ODBC connection as well?
Just to clarify, if you created your reprots using OLE DB then they can do so also. But you need to update your connection properties. Open each report click on Database, Set Location, scroll down to OLE DB and expand and then choose MS SQL Server Native 10 as your OLE DB provider, fill in all the logon info and then verify the database. Do the same for each subreport also.
Save your report and either send them the new one or if you are doing this remotely then replace the original report.
VERIFY your reports to confirm they still return correct data and do work as expected.
Or if you are using ODBC then yes you do select the MS 10 driver with a new DSN. Then do the above to update the reports to all use ODBC as their data sources.
Hope this is all clear now....
Thanks again
Don -
CrystalReports prompting for database details
Hello all,
I am posting this issue for the second time.. In my previous post, I didn't get a solution.
For some reason a few of the reports that we run are prompting for database information for no apparent reason. I have provided a screen shot of what the behavior looks like. Can you please let me know if you have any ideas on what might be causing this? I have written a number of reports with the same use but for some reason only a few behave in this way.
Any ideas you may have would be helpful.
[Crystal Report DB Login screen|http://img214.imageshack.us/img214/7665/image006cy.jpg]
Thanks in advance
AnoopHi..
I am using CrystalRepots 12.2 in my machines and .NET Framework 2.0.
I am using vb.net 2005 for developing applications.
I am using SQL 2005 Database.
Connection using is ADO.NET
Here is the database login source code. Please check it.
<pre>
Dim c As ConnectionInfo
Dim crDB As Database
Dim crTables As Tables
Dim crTable As Table
Dim TblLogonInfo As TableLogOnInfo
Dim crSections As Sections
Dim crSection As Section
Dim crReportObjects As ReportObjects
Dim crReportObject As ReportObject
Dim crSubreportObject As SubreportObject
Dim subRepDoc As New ReportDocument
Dim ServerName As String, DatabaseName As String
Me.rptDoc.Load(sCRPath, OpenReportMethod.OpenReportByTempCopy)
ServerName = ActiveCompanyServer
DatabaseName = ActiveCompanyDB
c = New ConnectionInfo
'Set Conenction info for DB
With c
.ServerName = ServerName
.DatabaseName = DatabaseName
.UserID = "sa"
.Password = SAPsaPwd
End With
'Associate DB to the report
crDB = Me.rptDoc.Database
'Instantiate Tables collection
crTables = crDB.Tables
'Loop thru tables in report and set connection information
For Each crTable In Me.rptDoc.Database.Tables
TblLogonInfo = crTable.LogOnInfo
TblLogonInfo.ConnectionInfo = c
crTable.ApplyLogOnInfo(TblLogonInfo)
crTable.Location = c.DatabaseName & ".dbo." & _
crTable.Location.Substring(crTable.Location.LastIndexOf(".") + 1)
Next
'Set the sections collection with report sections
crSections = Me.rptDoc.ReportDefinition.Sections
'Loop through each section and find all the report objects
'Loop through all the report objects to find all subreport objects, then set the
'logoninfo to the subreport
For Each crSection In crSections
crReportObjects = crSection.ReportObjects
For Each crReportObject In crReportObjects
If crReportObject.Kind = ReportObjectKind.SubreportObject Then
'If you find a subreport, typecast the reportobject to a subreport object
crSubreportObject = CType(crReportObject, SubreportObject)
'Open the subreport
subRepDoc = crSubreportObject.OpenSubreport(crSubreportObject.SubreportName)
crDB = subRepDoc.Database
crTables = crDB.Tables
'Loop through each table and set the connection info
'Pass the connection info to the logoninfo object then apply the
'logoninfo to the subreport
For Each crTable In crTables
With c
.ServerName = ServerName
.DatabaseName = DatabaseName
.UserID = "sa"
.Password = SAPsaPwd
End With
TblLogonInfo = crTable.LogOnInfo
TblLogonInfo.ConnectionInfo = c
crTable.ApplyLogOnInfo(TblLogonInfo)
crTable.Location = c.DatabaseName & ".dbo." & crTable.Location.Substring(crTable.Location.LastIndexOf(".") + 1)
Next
End If
Next
Next
</pre>
I had been using the same code from the year 2005(last 5 years). But didn't see this error before.
Also i am getting this error only for 2 or 3 reports.
I guess the issue is with the crystal report design.
Any way please help me.
Thank you
Anoop -
Could not load library for database connection LCA
Hi,
I am facing RFC connection prblem while connectiong to database. I have installed SCM5.1 and live cache in single server
Please find the logs.
Work process log:
B Mon Jul 20 11:19:13 2009
B create_con (con_name=LCA)
B Loading DB library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll) Error 126 [dlnt.c 241]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll'
[dbcon.c 4731]
B ***LOG BYG=> could not load library for database connection LCA [dbds#1 @ 1035] [dbds 1035 ]
A
A Mon Jul 20 11:21:58 2009
A GENER starting remote generation: /SAPAPO/OM_SYNC_LC_DB (requested by W1).
B
SM21:
No shared library found for the database with ID LCA|
No shared library found for the database with ID LCA
/SAPAPO/OM17|/SAPAPO/OM_SYNC_LC_DB|K |SAP Web AS Problem|SBAC |
Documentation for system log message BY G :
As well as the standard connection, an attempt was made to set up
another database connection, under the specified ID. The Shared Library
for this second database could not be found.
The Shared Library is usually found in the the Executable
directory (profile parameter DIR_LIBRARY) under the name dbs
<dbs>slib<os_ext>. <dbs> stands for the database type and <os_ext>
stands for the operating system-specific extension of the Shared
Libraries.
The database type is determined from the entry that corresponds to the
specified DB ID in the table DBDCON. Check whether the data in this
entry is correct.
ST22
Runtime Errors DBIF_DSQL2_CONNECTERR
Exception CX_SY_NATIVE_SQL_ERROR
Date and Time 20.07.2009 11:22:21
Short text
Error setting up a secondary database connection
What happened?
Connection to database system not possible with identifier "LCA".
|----
System environment
SAP-Release 700
Application server... "
Network address...... "
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 8
Shortdump setting.... "full"
Database server... "
Database type..... "ORACLE"
Database name..... "SC7"
Database user ID.. "SAPSC7"
Terminal................. " "
Char.set.... "C"
SAP kernel....... 701
created (date)... "Jul 6 2009 23:47:55"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "OCI_10201_SHARE (10.2.0.2.0) "
Patch level. 50
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 701
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Information on where terminated
Termination occurred in the ABAP program "SAPLSLCAPPS" - in
"LCA_EXISTS_LCA_ROUTINE".
The main program was "/SAPAPO/TS_BATCH_RUN ".
In the source code you have the termination point in line 23
of the (Include) program "LSLCAPPSU05".
The program "SAPLSLCAPPS" was started as a background job.
Job Name....... "MACROS"
Job Initiator.. "SC7GEN"
Job Number..... 10222002
The termination is caused because exception "CX_SY_NATIVE_SQL_ERROR" occurred
in
procedure "LCA_EXISTS_LCA_ROUTINE" "(FUNCTION)", but it was neither handled
locally nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLSLCAPPS "; its source code begins in line
1 of the (Include program "LSLCAPPSU05 ".
Please help me to resolve the issue.
SurajHi Natalia Khlopina,
I have raised OSS message to SAP.
Below is the information
E:\usr\sap\SC7\SYS\exe\uc\Copy_ of_NTAMD64_15062009>sdbregview -l
Server Utilities e:/sapdb/programs 7.7.02.08 64 bit valid
DB Analyzer e:/sapdb/programs 7.7.02.08 64 bit valid
PCR 7301 e:/sapdb/programs 7.3.01.21 valid
PCR 7500 e:/sapdb/programs 7.5.00.42 64 bit valid
SAP Utilities e:/sapdb/programs 7.7.02.08 64 bit valid
APO LC APPS f:/sapdb/lcs/db/sap 6.00.004 64 bit valid
Redist Python e:/sapdb/programs 7.7.02.08 64 bit valid
Base e:/sapdb/programs 7.7.02.08 64 bit valid
JDBC e:/sapdb/programs 7.6.03.02 valid
Messages e:/sapdb/programs MSG 0.5010 valid
ODBC e:/sapdb/programs 7.7.02.08 64 bit valid
SQLDBC 77 e:/sapdb/programs 7.7.02.08 64 bit valid
Database Kernel f:/sapdb/lcs/db 7.7.02.08 64 bit valid
Loader e:/sapdb/programs 7.7.02.08 64 bit valid
SQLDBC e:/sapdb/programs 7.7.02.08 64 bit valid
SQLDBC 76 e:/sapdb/programs 7.6.01.15 64 bit valid
Fastload API e:/sapdb/programs 7.7.02.08 64 bit valid
C:\Documents and Settings\sc7adm>disp+work
disp+work information
kernel release 701
kernel make variant 701_REL
compiled on NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
compiled for 64 BIT
compilation mode UNICODE
compile time Jul 6 2009 23:47:55
update level 0
patch number 50
source id 0.050
supported environment
database (SAP, table SVERS) 700
701
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Thanks for quick responce.
Suraj -
Outlook 2013 on Windows 8.1 keeps prompting for username and password.
Hi,
I have a HP Pavillion TouchSmart laptop with MS Windows 8.1 OS. I had installed MS Outlook 2013 Standard. This laptop is joined to the domain like many of my users, however, it keeps prompting for username and password. The emails are still able to send
and receive without any problem.
I have tried to check the connectivity, both cables and wireless are well connected.
I have tried to reinstall the Outlook 2013, but it still occurs.
Attempted to recreate profile but it still occurs.
For the configuration:
I have selected negotiate authentication, and have unchecked the box that states
"Always prompt for login credentials"
Please advise.
Thank you.Hi,
We can also follow this forum FAQ to troubleshoot this problem:
Why does Outlook keep prompting for password
http://social.technet.microsoft.com/Forums/en-US/bcd2d9c2-1a1b-4446-bf32-69fee8cdf11b/why-does-outlook-keep-prompting-for-password?forum=outlook
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Report sometimes prompts for database logon prior to execution
I have installed the Crystal Reports Integration Addon on our system and it works correclty for users on our terminal services server. But when I installed it on a user's PC running Windows XP, when I go to execute an existing report, the Runtime viewer launches, and then displays a Database logon panel with the Server field filled in, the database field is blank, and the SA user and password fields are populated, and I get an error that says logon failed. I type in the SA user id and password, but get the same error.
If the same user logs onto the TS server, the runtime viewer launches correctly and the report prompts for input, then displays the appropriate data (no database logon is requested). But if it runs at that user's workstation, the viewer launches, and then prompts for database logon.
We are running SAP 2007A SP00 PL47, CR Basic 2008 for SAP Business One, and the runtime viewer is Crystal Reports 2008 Runtime SP1. version 2.0.0.7Hi Bruce,
I am not sure what the problem is.
The only workaround I can think of is to change the Integrated Security in the report to true. This means that you will be using Windows Authentication as opposed SQL Authentication. This will not prompt for SQL username and password.
Usually this is NOT an ideal process as you will have to Add each and every Windows user in the SQL Database you are trying to access. For example, you have to add DOMAIN_NAME\User_Name under the Database Properties.
I am not sure what the minimum security you need to run the report. You will try a few different options and see what works best for you. Avoid permissions that would give users ability to write to the SQL database.
Again, I know this is not ideal. But I am not sure what else can be done here.
Krishnan -
Preview a Crystal report prompted for the sa password
Dear All,
When our customer preview a Crystal report, we got a window prompted for the sa password. Even we type in a correct password, it still says wrong password.
Only two user computer have this problem.
How do I solve it?
Regards,
KarenI install Crystal Reports Designing Software on those computers which canu2019t preview reports.
Then start the Crystal Reports design software to open the problem report.
It usually asks to enter the column on the interface u201COLE DB (ADO) u2013 Connect Informationu201D.
But it gets into the interface u201COLE DB (ADO) u2013 OLE DB Supplieru201D.
I correct the setup and save the report.
The problem is solved.
I try many methods, but only this one can solve my problem.
If you have another solution, please tell me, thanks!
Regards,
Karen -
Micrsoft Outlook somtimes prompting for username and password
hello All ,
I Have Exchange 2010 sp3 installed two mailbox servers & two HUB & CAS Servers and Outlook sometimes prompting for username and password .
how can fix it .
Thank youHi,
Please check the following points:
1. Does the issue happen to your external users or internal users?
2. For all users or some specific users?
If the issue happens to internal users, please configure the authentication in Outlook Security tab with Negotiate Authentication to have a try.
Thanks,
Winnie Liang
TechNet Community Support -
Network printers prompting for username and password
With the more recent OS upgrades I can now see my printers on my home network. Very cool. When I select one to print, I am prompted for a username and password. I have tried my network keys with no luck and cannot set a password on my printers. Is this unusual and if not, what should I be using?
You can try to take a fiddler trace in both scenarios and then search for the differences. This issue seems to be related with your network configuration that with the product itself.
In fiddler you can identify what verb is requesting for credentials and from there you can go further with troubleshooting.
You can check also this article
http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/users-are-prompted-for-username-and-password-when-opening-an-office-file-from-a-web-server.aspx
MCITP|MCTS SharePoint| SharePoint Performance blog -
Lync keeps prompting for username and password.
Hi All,
Lync 2013 prompt for username and password. The request for username and password happens intermittently.
Appreciate any help.
Thanks
denciodThis kb is helpful to troubleshoot this issue:
https://support.microsoft.com/en-us/kb/2298541
There are solutions for Lync users and Lync administrators, choose the method depending on your role.
-Jeff
Maybe you are looking for
-
Revolving Bank Gaurantee/ Letter of Credit
Dear All, Can anyone explain how can we handle the scenario of Revolving Letter of Credit/ Bank Gaurantee's? Thanks in advance.
-
Hi all, I wonder if there's a way to import pdf files into an iPad and then opened it. The reason I am asking this is that I have thousands of pdf files (books, articles, etc.) which I would like to read on a portable device like the iPad. But as I b
-
As we know jmf can stream in h.263/rtp with payload 34. i am streaming h.263/rtp to a device which does not understand payload 34 rather payload 96 whihc is used by h.263-1998 and 2000 updated versions. Do anyone has any idea how can change payload f
-
Some contacts don't update via twitter
Hello I have ios5 and the twitter integration and everything was working fine at the start. But recently, each time i tap "update contacts" on settings, none update. I made sure I had the twitter email adresses, but something is wrong. This worked
-
Olympus E-P1(ORF) RAWs Handling Error in ACR 5.5. How do I uninstall?
RAW images (ORF) from the Olympus E-P1 appear to be processed correctly in ACR 5.5 but highlights are full of small magenta and black specs that are then transferred in to the final processed image. I've attached an image (its a crop of larger image)