Dynamic Port list?

hi,
I have 3 Server.
Srev1
Serv2
Serv3
Serv1>Serv2>Serv3
Serv1 is source & Serv2 is Target. while Serv2 is source & Serv3 is target.
My question is that i have 2 extract processs & 2 data pump process & 2 Replicat process. I just wanted to know that i have just configure one port 7809 that uses default port 7840 for Server colletor. while other process are not replicating. Should i use dynamice port list paramter for other process to communicate.
II- question is that if we open 2 other port in the source to communicate on target(g Serv1 & Serv2) then we should have to open different ports for (Srev2 & Serv3)????
Regards,
AMSII

hi
my question is simple i just wanted to know that should i have to oped more ports if i have more than one extract,datapump & replicat process.
e.g
if i have manager port is 7809 uses default collector port 7840
then from above situation should i have to open more then ports. mean i have to open 2 more ports???
Regards,
AMSII

Similar Messages

Sql server 2012 express - tcp/ip connection to named instance using dynamic port not working

I have a named instance on a SQL 2012 Express server that won't connect via TCP/IP when wanting to connect off of the dynamic port. I can connect via shared memory locally on the server.   I can connect to the namespace when specifying the
dynamic port listed in the configuration manager.
This is the only named instance on the server and it is not the default.
TCP/IP is enabled
Allow Remote connections is enabled
the server browser service is running
I can connect via the dynamic port number
I am testing the connection locally on the server, so I don't believe a firewall is the issue. I get the same results if I test it from a remote computer.
When using the sqlcmd (sqlcmd -S tcp:SQLSRVR\NAMEINST -E) I get the message that "the requested protocol isn't supported [xfffffffff]".   The command (sqlcmd -S tcp:SQLSRVR\NAMEINST,59992 -E) works.
Through SSMS, I get the message "the connection was actively refused".
On other boxes, I can connect with the named instance without having to specify the port.
I have looked through the sql logs and nothing much shows up. The log does show that is listening on the port # for ipv4 and ipv6.   There is also a line in there talking about the SPN not being registered and not to worry about it if
you are not using Kerberos. I logged in through shared memory and it said I was using NTLM.
Any help would be appreciated.
thanks.

Hi clw,
I’m writing to follow up with you on this post. According to your description, I do a test, if you configure the database engine to listen on a specific TCP port (59992), and
the port is opened in the firewall. If you want to connect to the SQL Server instance, you 'd better to
use the port number.
In my opinion, by default, the default instance of the Database Engine uses port 1433, usually, if you have configured the server to listen on a non-default port number, when an instance of SQL Server uses dynamic port allocation, the connection string that
is built at the SQL Server client does not specify the destination TCP/IP port unless the user or the programmer explicitly specifies the port. Therefore, the SQL Server client library queries the server on UDP port 1434 to collect the information about the
destination instance of SQL Server.
If UDP port 1434 is disabled, the SQL Server client cannot dynamically determine the port of the named instance of SQL Server. Therefore, the SQL Server client may be unable to connect to the named instance of SQL Server. In this situation, the SQL Server
client must specify the dynamically allocated port where the named instance of SQL Server is listening.
For more information about configuring an instance of SQL Server to listen on a specific TCP port or dynamic port, you can review the following article.
https://support.transfrm.com/entries/503111-How-to-configure-an-instance-of-SQL-Server-to-listen-on-a-specific-TCP-port-or-dynamic-port
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

How to create Exchange dynamic distribution list using multivalue extension custom attribute

I am trying to create a dynamic distribution list using an ExtensionCustomAttribute. I am in hybrid mode with Exchange 2013. The syntax I have is this:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {(ExtensionCustomAttribute2 -eq 'NH')}
This works correctly on-prem. But hosted always results in an empty list. I can see in dirsync the attribute is in the hosted environment, but for whatever reason, the distribution group gets created but always come up null.
If I create a group looking at the single valued attributes, such as CustomAttribute6 -eq 'Y', it works correctly on-prem and hosted.
If anyone has any suggestions I would appreciate it.

I don't think I provided enough information about the problem. Let me add some and see if it makes sense.
I have an Exchange 2013 on-premise configured in hybrid mode with Office365. For testing purposes, I have 2 users, Joe and Steve, one with the mailbox on-prem, and the other with the mailbox in the cloud. Each of them has CustomAttribute6 = 'Y'
and ExtensionCustomAttribute2 = 'NH'. Dirsync shows these users and these attributes are synced between on-prem and cloud.
Using on-prem Exchange powershell, I run the following command:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (CustomAttribute6 -eq 'Y')}
This correctly finds the 2 users when I query for them as follows:
$DDG = Get-DynamicDistributionGroup DG_NH
Get-Recipient -RecipientPreviewFilter $DDG.RecipientFilter | FT alias
So I then delete this DG, and recreate it this time looking at the multi-value attribute ExtensionCustomAttribute2, as follows:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (ExtensionCustomAttribute2 -eq 'NH')}
Replaying the query above, I can see this also works fine and finds my two users.
Next I open a new powershell and connect to Office 365 and repeat the process there.
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (CustomAttribute6 -eq 'Y')}
This correctly finds the 2 users when I query for them.
And then delete the group and recreate it using the multi-value attribute:
New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (ExtensionCustomAttribute2 -eq 'NH')}
When I run the query this time it produces no result. Every test I try results in an empty group if I am using a multi-valued attribute in the search criteria in the cloud. If I use single valued attribute, it works fine.
I really need to be able to get multi-valued DDG's working in the cloud. If anyone has done this and has any suggestions, I would appreciate seeing what you did. And if this is the wrong forum to port this, if you can point me to a more suitable
forum I will report there.
Thanks,
Richard

Using BC4J Session Bean in OC4J 10.1.3 with dynamic ports

Hi Folks!
I've benn having trouble connecting my BC4J Session Bean to an Oracle 10gAS R3 server instance tha uses dynamic ports.
After migrating a BC4J/Struts/JSP application from 9iAS to 10gAS R3, I'm trying to connect from a client application to my instace in the server. The problem is that the instance uses dynamic ports, and whenever I deploy my application to the server, I've got to update the port number in the bc4j.xcfg file in the client application, wich has became impossible to maintain.
When I connect to an EJB in the same server, I use the instance name instead of the port number. However, when I do the same with BC4J, I get the following exception:
javax.naming.NamingException [Root exception is java.lang.NumberFormatException: For input string: "OC4J_dvt20"]
     at oracle.jbo.client.remote.ejb.ias.AmHomeImpl.remoteLookup(AmHomeImpl.java:131)
     at oracle.jbo.client.remote.ejb.ias.AmHomeImpl.getRemoteApplicationModuleHome(AmHomeImpl.java:42)
     at oracle.jbo.client.remote.ejb.AbstractApplicationModuleHomeImpl.lookupUsingPlatformContext(AbstractApplicationModuleHomeImpl.java:82)
     at oracle.jbo.client.ejb.ApplicationModuleHomeImpl.<init>(ApplicationModuleHomeImpl.java:52)
     at oracle.jbo.client.remote.ejb.AbstractApplicationModuleHomeImpl.<init>(AbstractApplicationModuleHomeImpl.java:35)
     at oracle.jbo.client.remote.ejb.ias.AmHomeImpl.<init>(AmHomeImpl.java:35)
     at oracle.jbo.client.remote.ejb.ias.InitialContextImpl.createJboHome(InitialContextImpl.java:28)
     at oracle.jbo.common.JboInitialContext.lookup(JboInitialContext.java:77)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:136)
     at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:80)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:2468)
     at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:536)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2094)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1961)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:419)
     at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1546)
     at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1504)
     at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1476)
     at pkg.TesteEjbMCT.findTLS(TesteEjbMCT.java:98)
     at pkg.TesteEjbMCT.main(TesteEjbMCT.java:51)
My question is: is there a way to configure my bc4j.xcfg, or another way to connect, in order to skip the use of the port number? Or a way to get the port number from the server before I connect?
Thanks in advance!!!

I've just found the solution from Steve Muench weblog, always useful by the way!
You can find the solution at this link http://radio.weblogs.com/0118231/stories/2004/05/07/handcodingDynamicDiscoveryOfEjbdeployedAppmodule.html
In summary, we need to use the class com.evermind.server.rmi.RMIInitialContextFactory, which supports dynamic lookup, and implement the lookup ourselves.
The code I've written to lookup the service is listed below:
public static ApplicationModule getAppModuleManutencao() {
try {
Context ctx = getContext();
ManutencaoFacadeHome home = (ManutencaoFacadeHome) ctx.lookup(EJB_MANUTENCAO_BEAN_NAME);
ApplicationModule am = ApplicationModuleProxy.create(home, null);
return am;
} catch (NamingException nex) {
nex.printStackTrace();
return null;
private static InitialContext getContext() {
try {
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.evermind.server.rmi.RMIInitialContextFactory");
env.put(Context.SECURITY_PRINCIPAL, "admin");
env.put(Context.SECURITY_CREDENTIALS, "welcome");
env.put(Context.PROVIDER_URL, "opmn:ormi://dsv008:OC4J_dvt20/mct");
env.put(Context.SECURITY_AUTHENTICATION, "simple");
return new InitialContext(env);
}catch (NamingException e) {
e.printStackTrace();
return null;
I hope this helps someone!!!
Cheers!

Java Web service and dynamic entry list

Hello,
In my VC mode, I have a combo box with a dynamic entry list. This entry list call a web service function which the source is :
public EntryListBean[] getEntryList() {
          EntryListBean[] liste = new EntryListBean[2];
          liste[0] = new EntryListBean();
                liste[0].setText("1");
          liste[0].setValue("Liste 1");
          liste[1] = new EntryListBean();
                liste[2].setText("2");
          liste[1].setValue("Liste 2");
          return liste;
In output port, i have:
VALUE -
> @value
TEXT    -
> @text
When i test this function with 'Test Data Service', it work but when i deploy the model, there is nothing in the combo box. Do you have the same problem ?
I have installed NWDW v7.0 SP9 with Visual Composer patch 2.
Regards

Hi Francois,
Did u try using dynamic entry list with a BAPI. Is that working fine?
Actually, I faced the same problem. I used a drop-down list, in which dynamic entry list works fine in case of a BAPI and appears blank in case of a webservice. I applied the latest patch files mentioned in a SAP note. People in forum asked me to do that. Its mentioned in the note that, "Dynamic entry list with webservice bug is fixed in the released patch file". But even after applying the latest patch files, it did not work for me. So, i think this bug is yet to be fixed.
Regards,
Kavitha.

JDBC Dynamic Entry List

Hi All,
I'm trying to create a dynamic entry list based on JDBC stored procedure (SP).
While configuring the output parameters I don't see any of the output fields of the SP.
Any advice would be appreciated,
Aviad

Yes, you're right. This is because VC doesn't know the fields of the stored procedure until you test it, but it has to be done separately for each usage of the stored procedure, and you can't do it for entry lists.
There is a workaround for it though.
Wrap the store procedure with a service: create a service in the same DC (from the New Model dialog), drag the stored procedure to the service, test it and add the fields, and from the stored procedure drag data in and data out for all its ports. Then use that service in the entry list (when you define the entry list, choose "Visual Composer Models" in "search in").
Best regards,
Tal.

Dynamic entry list - Use Value as input to WS

Hi,
I have a Dynamic Entry list, which displays the text, I would however like to store its value, so that I could use it as input for the Web service.
Any ideas, how that can be done?
Many thanks,
Dharmi

Dharmi Tanna,
In your model,
Drag a Data Store connector from the Compose task panel to the Design board.
Drag from the out port of the UI element whose data is to be stored in the Data Store to the port of the Data Store element.
Right-click the Data Store element and from the context menu, choose Define Data.
Define a virtual field for the Data Store by clicking the Add Field button and choosing the type of data that you want to store. Add more fields as required.
The field is added with a default name.
To define a default value for each field, enter it in the Default Value column.
Define the event used to transfer data to the Data Store
Right-click the connecting line to the Data Store, and from the context menu choose Rename.
Name the event with the same name as the action that adds items to the Data
Map values from the UI element fields to the Data Store fields:
Right-click the connecting line between the elements, and from the context menu choose Map Data.
In the Assigned Value column, choose a UI element field, enter a field name, or define a dynamic expression to specify from where to take the value that is placed in the Data Store.
Edited by: Ahmed Salah on Apr 1, 2008 11:02 PM

DS Repository with SQL Server Dynamic Ports

I have just installed Data Services 4 on our production SQL server cluster.
While our DEV SQL server runs on the standard port (1433), our prod servers use dynamic ports. I don't administer the servers and cannot change this.
Initially I was getting "java.net.connectexception: Connection Refused: Connect " errors.
After a lot of difficulty I managed to get DS to install by giving it the currently allocated dynamic port number. I had to enter a port, otherwise the 'next' button was grey out.
Everything worked, but I am concerned that once the SQL servers restarts, it will get a new port and DS will fail.
Is there a config file which stored the connection strings for the repository ? I'l like to see if its saved the port of not. Microsoft claim if no port is listed, it will get the Dynamic port automatically.
Funily enough, when I run the repository manager to set up new repositories, it makes no mention of ports. It the port only needed for the Initial software install ?
Thanks,
Leigh.

LeighK wrote:
> Funily enough, when I run the repository manager to set up new repositories, it makes no mention of ports. It the port only needed for the Initial software install ?
Port number will be asked when you try to add a repository to the management console.
Regards,
Shine

Flex Table Add Row Issue with Dynamic Entry Lists in Visual Composer

All,
Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue. What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
Many thanks,
Freek

Hi,
you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
I have never heard of the problem that entry lists are emptied after "insert"-event.
Kindes Regards,
Benni

Dynamic port configured for FILE adapter is not working

Hi,
I have a simple dynamic port in an orchestration that writes a file to a file location. Here is the configuration
================
FilePort(Microsoft.XLANGs.BaseTypes.Address) = "FILE://c:\\TestFolder\\Out";
FilePort(Microsoft.XLANGs.BaseTypes.TransportType) = "FILE";
================
When I run this orchestration, the dynamic port does not write the file to the folder, however I does not show any error either. It is always in "Ready to Run" state where the message is "Queued Awaiting".
I tried all sorts of combinations like FILE:// FILE:\\ File: file:// file:\\ etc... and also without the moniker, just c:\.... I get the same problem.
when I use a static port(subscribed to the same message) it works fine. When I use a static port ALONGWITH this dynamic port then both works fine !!! I receive 2 files.
but when I use only dynamic port it does not work!!
Anybody knows how to solve it.
THANKS IN AVANCE
PLEASE HELP
Surya

It could be becasue you 're not passing in the file name, Try something like this..
SndPort_Dynamic(Microsoft.XLANGs.BaseTypes.Address)=@"file://C:\Test\Try\Out\Test1.xml";
But even when you don't pass the file name, i was expecting the erro to be like:
The FILE send adapter cannot open file C:\TestFolder\Out\ for writing.
Details: The system cannot find the path specified.
But try with File Name and restart the host instance after the change.
Or use somehting like this:
FilePort(Microsoft.XLANGs.BaseTypes.Address)=@"file://C:\Test\Try\Out\\%MessageID%.xml";
FilePort(Microsoft.XLANGs.BaseTypes.TransportType) = "File";
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

Dynamic Select List Allowed Values

Howdy Folks,
I am trying to allow end users to select their username. The usernames are generated from a rule library, and displayed in a select form element. I am doing this by having the allowedValues call the rule that generates the possible names directly. The rule returns a list of valid names. The problem I am currently having, is that if the page reloads or refreshes, then the allowedValues calls the rule again. Some of the username choices involve random numbers, so it is possible (and very likely), that separate calls to the rule will generate different potential values. So what is now happening, is that when a user selects the value, the page reloads, and the end user sees an error that looks like this:
( ) - Warning: Selected value for field 'Select a Valid User Name' does not match any of the allowed values.
The reason I am reloading the page, is that I am also trying to show the user what their email address will look like with the new value. So I have a different form element that is loading is value dynamically, and referencing the select form element. This mostly works, but the warning above is unacceptable.
Is there a way I can load the dynamically created list only once, the first time the form is viewed, and not load it again every time the page refreshes?
Another thing I tried to do (but didn't have luck with, so I sorta gave up on it) was to use the onChange of the select to change the value of email display field. This way the page never reloads and I don't have to deal with that issue. I'm thinking the onChange might actually work, but I would need to execute javascript or something, and not just use an express <set/> command to set the value of the field name that displays the email text.
Does anyone have advice on how to make the values only load once? Or how to change the value on the onChange event?
Thanks!
Jim

Mike,
Thanks for the feedback. I actually did try that eventually. I created a variable in the form, and initialized that variable to the list of possible values. Then I referenced the variable in the 'allowedValues' of the select form item. At that point in time I still had the select box set as an action, so it would reload the page, hoping to reload the value in the email display field. This still did not work. Each time the action fired off, the variable was re-initializing itself. I eventually tried to put in a check, so it would not re-initialize itself if it had already been initialized. That caused a syslog error.
I ended up solving the problem using javascript. I changed the field that reported the potential email address to an html element. Then for the html attribute I made a div with an ID. I then set a line of javascript into the onChange attribute of the select form element. This worked when ever the select form value changed. I then added the same line of javascript to the onLoad attribute of the jsp pages body element. This worked for loading the page.
This solved the problem of the page reloading and the select getting new values. That still happens if you actually reload the page, but all the form elements work without the reload now.
Thanks!
Jim

Report Viewer Dynamic Parameter List not showing a complete list of values

Hi, I have installed the crystal report runtime 13.0.1.220 for framework 4.0 in a 64-bit windows 7 professional server.
I have an aplication that opens crystal reports using the crystal report viewer control for visual studio 2010, also version 13.0.1.220.
ISSUE: The report opens fine, but it does not shows all the available values in the dynamic parameter list.
I have tried setting the MaxRowsetRecords registry key to diferent values but it does not work.
I do not have any crystal report stand alone version installed in my server.
Please help me?

Hi Ludek,
yes i followed the instructions of the KBase you are mentioning, but it isn't working for me.
I modified the following keys:
HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports\DatabaseOptions\LOV
and
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports\DatabaseOptions\LOV
1) I had to create the LOV key under the DatabaseOptions in both keys.
2) Inside the LOV keys I created the new string value MaxRowsetRecords and set the value to different values. (Ex: 5000, 10000 and 1000000)
3) I restarted my server. Still not working.
4) Then after that i modified the following registry keys: (leaving the first 2 keys modified)
HKEY_CURRENT_USER\Software\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports\DatabaseOptions\LOV
and
HKEY_CURRENT_USER\Software\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports Designer Component\DatabaseOptions\LOV
5) Also had to create the LOV key under the DatabaseOptions in both keys.
6) Inside the LOV keys I created the new string value MaxRowsetRecords and set the value to different values. (Ex: 5000, 10000 and 1000000)
7) Restarted my server. still not working
8) Then after that i modified the following registry key: (leaving the first 4 keys modified)
HKEY_CURRENT_USER\Software\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports Designer Component\ReportView
Inside this key I created the DWORD PromptingLOVBatchSize and gave it a decimal value of 1000000
9) Restarted the server. Still not working. For crying out LOUD!!

How to create a dynamic entry list for an input field in VC(ce 7.1)

Hello all,
I have an Input field, i need to create a Dynamic Entry List for it in VC(ce 7.1).
How can this be done.
Thanks in Advance.
Thanks and Regards,
Santhosh Guptha N

Hi Santhosh,
You can define Dynamic entry list for Drop down list and combo box but not for input field.
[Refer this|http://help.sap.com/saphelp_nwce10/helpdata/en/2a/28249060dd4dbc872f6266f4557364/frameset.htm] for defining entry list.
Let me know if it helped.
Regards,
Dharmi

Creating a dynamic Selection List based on a View Object

Hello,
I'm new to JDeveloper and I would like to create a JSP Page with dynamic Selection List based on a runtime query or based on a view object (BC4J). The selection made by an user should serve another dynamic query with the necessary parameters that I built using createViewObjectFromQueryStmt(). By now I tried this using the InputSelectLOV from the Component Palette in JDeveloper. But without success. By the way: the selection list is not very large (5 values), so it's not necessary to have a form finding the desired value.
Maybe someone had experience about creating this already. Please give me a tip or a little example.
Thanks.

http://otn.oracle.com/products/jdev/howtos/jsp/renderers.html

Flex Table Add Row Issue with Dynamic Entry Lists

All,
Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue. What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
Many thanks,
Freek

Hi,
you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
I have never heard of the problem that entry lists are emptied after "insert"-event.
Kindes Regards,
Benni

Dynamic Port list?

Similar Messages

Maybe you are looking for