Dynamic table name in select statment

hai,
Please help me....
oracle 9i i am using.
i have four tables abc_121,
abc_122,
abc_123,
abc_124.
i want to pick records from a table.table name should be prepared dynamically.
i.e., i want to pick records from a quarter table of this year.(ex: abc_124). using sql statement only.
i have tried..but i couldn't...... pls help me...

ramadurga.v wrote:
oracle 9i i am using.
i have four tables abc_121,
abc_122,
abc_123,
abc_124.
i want to pick records from a table.table name should be prepared dynamically.
i.e., i want to pick records from a quarter table of this year.(ex: abc_124). using sql statement only.Create a partition view. E.g.
create or replace view abc as
select * from abc_121
union all
select * from abc_122
union all
...For the partition view approach to correctly work (doing "partition pruning"), you need to have a constraint on the column that identifies that partition.
In other words, you cannot use the table name as an attribute to identifies its data content. Foe example, you can have tables YEAR2001_Q1 and YEAR2001_Q2. However, the year and quarter also need to be in the table itself - e.g. columns YEAR and QUARTER.
For table YEAR2001_Q1, the YEAR column needs to have a check constraint that ensures it is always 2001. And a check constraint for column QUARTER to ensure that it is always 1.
If these conditions are met, then a select from the partition view using +"where YEAR=2001 and QUARTER=2"+ will result in only table YEAR2001_Q2 to be used and not other tables like YEAR2001_Q1.
See {message:id=10539404} for an example.

Similar Messages

Dynamic table name in an inner join - select statement

Hi,
Please can you let me know if is possible to use a Dynamic table name in an inner join?
Something like the statement below? (It works in a simple select statement but not in an inner join)
SELECT *
     INTO CORRESPONDING FIELDS OF <t_itab>
      FROM <Dynamic table name> INNER JOIN pa0050 ON
      ( <Dynamic table name>pernr = pa0050pernr )
       WHERE <Dynamic table name>~pernr = it_pernr-l_pernr
       AND pa0050~bdegr = f_bdegr.
Any help would be apprecited very much.
Thanks & Regards.

Hi,
Check this link.
[http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb39c4358411d1829f0000e829fbfe/frameset.htm]
[Re: accessing dynamic internal table's fields??;
hope it'll help u.
Regards,
Sneha.
Edited by: sneha kumari on Jun 18, 2009 1:57 PM

How to use bind variable value for table name in select statement.

Hi everyone,
I am having tough time to use value of bind variable for table name in select statement. I tried &p37_table_name. ,
:p37_table_name or v('p37_table_name) but none worked.
Following is the sql for interactive report:
select * from v('p37_table_name') where key_loc = :P37_KEY_LOC and
to_char(inspection_dte,'mm/dd/yyyy') = :P37_INSP_DT AND :p37_column_name is not null ;
I am setting value of p37_table_name in previous page which is atm_state_day_insp.
Following is error msg:
"Query cannot be parsed, please check the syntax of your query. (ORA-00933: SQL command not properly ended) "
Any help would be higly appreciated.
Raj

Interestingly enough I always had the same impression that you had to use a function to do this but found out from someone else that all you need to do is change the radio button from Use Query-Specific Column Names and Validate Query to Use Generic Column Names (parse query at runtime only). Apex will substitute your bind variable for you at run-time (something you can't normally do in pl/sql without using dynamic sql)

How to set dynamic table name in sql query?

I want set dynamic table name by parameter in sql query,just like:
select * from :tbname
but run report is error,BI P report table name is invalidation.
What can i do? Thanks!

Hi,
that's only possible inside a data template with a lexical parameter.
Regards
Rainer

Problem with Dynamic Table Name

Hello all,
I am having trouble using a dynamic table name. I have the following code.....
declare l_cur sys_refcursor;
l_ID int;
l_tableName varchar(30);
BEGIN
open l_cur for
select hkc.ColumnID, mapping from &HKAPPDB_Schema_Name..doctablemapping ddm
inner join &HKDB_Schema_Name..HKColumns hkc on hkc.doctablemappingid = ddm.id
where ddm.id > 0;
LOOP
     FETCH l_cur into l_ID, l_tableName;
     EXIT WHEN l_cur%notfound;
     -- update missing VerbID in DocumentDocMapping table
     UPDATE &HKAPPDB_Schema_Name..IndexedDocument
     SET VerbID = (SELECT t.VerbID
                         FROM (SELECT DocRef, VerbID, DateUpdated
                              FROM &HKAPPDB_Schema_Name..l_tableName dd        - this is where the dynamic table name is used
                              WHERE dd.VerbID is not NULL))
     WHERE HKColumnID = l_ID AND VerbID is NULL;
END loop;
end;
/When I try to execute this i get an error
ORA-00942: table or view does not exist
What am I doing wrong?
Regards,
Toby

redeye wrote:
I only started about 6 weeks ago, with no tutorials and learning it on the fly; Same here.. only my introduction was to a 12 node Oracle OPS cluster all those years ago.. and required a whole new mind set after using SQL-Server extensively. But it was fun. Still is. :-)
but thats what you get when a company throws you in at the deep end with a ridiculous time constraint to migrate a whole MSSQL DB.Migrating SQL-Server to Oracle is not a simple thing. A lot of best practices in SQL-Server are absolutely worse practices in Oracle - they are that different. Simple example is lock escalation - an issue in SQL-Server. In Oracle, the concept of a lock being escalated into a page lock simply does not exist.
In terms of getting the migration done as quickly and painlessly as possible I try to reuse all the logic as it appears in the MSSQL code - in this case it was using dynamic table names. I do not doubt that i am probably shooting myself in the foot in the long run.....As long as you do not splatter too much blood on us here.. not a problem :D
Seriously though - just keep in mind that what works in SQL-Server may not work as well (or even at all) in Oracle. So do not hesitate to refactor (from design to code to SQL) mercilessly when you think it is warranted.

Dynamic table name in native SQL

Hi,
How can i use dynamic table name in native SQL?
My req is to select data from a external database table , but the table name will be only poulated during runtime.
How can i acheive this?
Regards,
Arun.

It should work OK - see demo below.
Jonathan
report zsdn_jc_adbc_test.
start-of-selection.
perform demo_lookup.
form demo_lookup.
data:
    l_error_msg          type string,
    ls_t001              type t001, "Company
    ls_t003              type t003. "Doc types
perform dynamic_lookup
    using
      'T001'
    changing
      ls_t001
      l_error_msg.
write: / l_error_msg.
perform dynamic_lookup
    using
      'T003'
    changing
      ls_t003
      l_error_msg.
write: / l_error_msg.
endform.
form dynamic_lookup
using
    i_tabname            type tabname
changing
    os_data              type any
    o_error_msg          type string.
* Use ADBC to select data
data:
    l_mandt_ref          type ref to data,
    l_result_ref         type ref to data,
    l_mandt              type symandt,
    l_tabname            type tabname,
    l_sql_statement      type string,
    lo_cx_root           type ref to cx_root,
    lo_cx_sql            type ref to cx_sql_exception,
    lo_connection        type ref to cl_sql_connection,
    lo_statement         type ref to cl_sql_statement,
    lo_result_set        type ref to cl_sql_result_set.
clear: os_data, o_error_msg.
get reference of l_mandt into l_mandt_ref.
get reference of os_data into l_result_ref.
l_mandt   = '222'.   "i.e. select from client 222
l_tabname = i_tabname.
try.
      lo_connection = cl_sql_connection=>get_connection( ).
      lo_statement = lo_connection->create_statement( ).
* Set criteria for select:
      lo_statement->set_param( l_mandt_ref ).
      concatenate
        'select * from' l_tabname
        'where mandt = ?'
        into l_sql_statement separated by space.
* Execute
      call method lo_statement->execute_query
        exporting
          statement   = l_sql_statement
          hold_cursor = space
        receiving
          result_set = lo_result_set.
* Get the data from the resultset.
      lo_result_set->set_param_struct( l_result_ref ).
      while lo_result_set->next( ) > 0.
        write: / os_data.
      endwhile.
* Tidy up:
      lo_result_set->close( ).
      lo_connection->close( ).
    catch cx_sql_exception into lo_cx_sql.
      o_error_msg = lo_cx_sql->get_text( ).
    catch cx_root into lo_cx_root.
      o_error_msg = lo_cx_root->get_text( ).
endtry.
endform.

Dynamic table name in native sql query

Can i pass a dynamic table name in this query ---
            EXEC SQL PERFORMING APPEND_MTO.
              SELECT
                           LTOG_QUANTITY_TYPE,
                           FCONO,
                          WBSELEMENT,
                         PROJECT
              INTO   :IMTO
              FROM RWORKS.MTO_ISO_V2
              WHERE LTOD_DATE > TO_DATE(:MAXD,'YYYYMMDDHH24MISS')
            ENDEXEC.
How can i pass this table name RWORKS.MTO_ISO_V2 dynamically in the query
Edited by: Madhukar Shetty on Nov 26, 2009 2:40 PM

Can i pass a dynamic table name in this query ---
            EXEC SQL PERFORMING APPEND_MTO.
              SELECT
                           LTOG_QUANTITY_TYPE,
                           FCONO,
                          WBSELEMENT,
                         PROJECT
              INTO   :IMTO
              FROM RWORKS.MTO_ISO_V2
              WHERE LTOD_DATE > TO_DATE(:MAXD,'YYYYMMDDHH24MISS')
            ENDEXEC.
How can i pass this table name RWORKS.MTO_ISO_V2 dynamically in the query
Edited by: Madhukar Shetty on Nov 26, 2009 2:40 PM

Dynamic Table name in Inner Join in 4.6c

data: tab1(10) type c value 'MARA',
        tab2(10) type c value 'MAKT'.
data: dbtab1(10) type c,
         dbtab2(10) type c .
dbtab1 = tab1.
dbtab2 = tab2.
DATA: BEGIN OF itab occurs 0,
           matnr TYPE mara-matnr,
           maktx type makt-maktx,
END OF itab.
DATA: column_syntax TYPE string,
            dbtab_syntax TYPE string.
PARAMETERS: p_matnr TYPE mara-matnr.
dbtab_syntax = '( (dbtab1) AS t1 '
&' INNER JOIN (dbtab2) AS t4 ON t1MATNR = t4MATNR )'.
SELECT matnr maktx
FROM (dbtab_syntax)
INTO TABLE itab WHERE t4~matnr   = p_matnr.
Got the following error:
"A table name, specified in an SQL command, is unknown"
It seems not able to read dynamic table name in dbtab_syntax.
thanks
anya
Moderation Message: Duplicate Post.
Edited by: kishan P on Nov 29, 2010 11:17 AM

Hi,
Check this link.
[http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb39c4358411d1829f0000e829fbfe/frameset.htm]
[Re: accessing dynamic internal table's fields??;
hope it'll help u.
Regards,
Sneha.
Edited by: sneha kumari on Jun 18, 2009 1:57 PM

Passing dynamic table name in ADO. net destination

I am new to SSIS and I have a requirement where i need to pass dynamic table name in ADO .net destination .
My package contains an "Execute Sql task" in the control flow which computes the destination table name to be provided at run time and stores it in a variable expression
"@[User::Table_name]"(which has a scope of full package).
Now, the problem I'm facing right now is that , I am unable to use this variable expression in the ADO .Net Destination .
I need to pass this variable expression as the table name in ado .net destination.
But, whenever I use this variable in place as the table name I keep on getting this error and my package fails:-
[ADO NET Destination [403]] Error: The Table or View name is not expected. \n\t If you are quoting the table name, please use the prefix " and the suffix " of your selected data provider for quotation. \n\t If you are using multipart name,
please use at most three parts for the table name.
Although ,I am able to run my package when i am providing the existing(static) table name.So there is nothing wrong with the package.
Tried a lot of things still not working..Please help...

I am having the result stored in the variable expression . I just need a way to be able to use it as the Destination table in ADO .net Destination.
I am not sure if this will work for you, but I am able to store the table name in variable and use it dynamically (via data flow task expression property ) as shown.
Thanks, hsbal
Hi Adeep,
Based on my further research, just as hsbal said, we can set a variable as ADO.NET Destination table via Expressions property in Data Flow Task.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Dynamic table name - error

After run (or test) of procedure
create or replace procedure tmp_select_dymanic
( AInTable IN VARCHAR2,
ACount OUT NUMBER
) as
begin
EXECUTE IMMEDIATE 'BEGIN SELECT count(*) INTO :Count FROM :InTable END;'
USING ACount, AInTable;
end tmp_select_dymanic;
error message: invalid table name.
I know the table exists and contains data. I can make SELECT in SQL (not dynamic).
What a reason for error? May be privileges in database? But i make SELECT on my own table?
How can i set dynamic table name in other way?
My Oracle Version 10g.

What you are asking can be done by REF_CURSOR;
look this example and try your self the rest:
CREATE OR REPLACE PROCEDURE insert_to_table_dinamic (
   table1   IN   VARCHAR2,
   table2   IN   VARCHAR2
AS
   rc         sys_refcursor;
   v_sql      VARCHAR2 (2000);
   v_deptno   NUMBER;
BEGIN
   v_sql :=
         'SELECT DEPTNO FROM '
      || table1
      || ' WHERE ROWNUM = 1 AND DEPTNO IS NOT NULL';
   OPEN rc FOR v_sql;
   LOOP
      FETCH rc
       INTO v_deptno;
      EXIT WHEN rc%NOTFOUND;
      v_sql :=
            'UPDATE '
         || table2
         || ' SET DEPTNO = '
         || v_deptno
         || ' WHERE DEPTNO IS NULL';
      EXECUTE IMMEDIATE v_sql;
   END LOOP;
EXCEPTION
   WHEN OTHERS
   THEN
      DBMS_OUTPUT.put_line (SQLCODE || SQLERRM);
END insert_to_table_dinamic;when i give DEPT , EMP as my 2 parameters above code will set the deptno in EMP table where deptno is null;
--Just a test proc.

(Urgent) Dynamic Table Name

Hi Fellows,
Can I use dynamic table name in a loop? I have a problem that I want to use variable table in a cursor for example
procedure check_rows as
cursor c1 is
select view_name
from user_views;
v_count number;
v_view_name varchar2(35);
begin
for i in c1 loop
select count(*)
into v_count
from i.view_name;
if v_count = 0 THEN
dbms_output.put_line ('The View '| |i.view_name| |' has no rows');
end if;
end loop;
end;
but i receive a message
i.view_name must a name of a table to which the user has access.
Can anybody solve my problem.
Thanks in advance
Mustafa

Here is some codes I wrote with DBMS_SQL. I hope it will help you to start.
PROCEDURE Get_record(p_select IN OUT select_rec, where_str IN OUT varchar2) IS
my_keyblk varchar2(6);
veh_id integer;
ser_date date;
succ_flag number;
blk_route varchar2(4);
blk_run integer;
my_date_type integer;
cur_blk_route INTEGER;
rows_processed INTEGER;
ignore integer;
select_str varchar2(3000);
First_date date;
Last_date date;
BEGIN
begin
select start_date, end_date into first_date, Last_date from change_date
where current_next_code = 'CURRENT';
exception when others then
null;
end;
select_str := 'select keyblock, keycoach, proflag, pullout_date
from logblock
where (pullout_date between first_date and Last_date)
and proflag = 0';
cur_blk_route := dbms_sql.open_cursor;
dbms_sql.parse(cur_blk_route, select_str, dbms_sql.v7);
dbms_sql.define_column(cur_blk_route, 1, blk_route, 6);
dbms_sql.define_column(cur_blk_route, 2, blk_run);
dbms_sql.define_column(cur_blk_route, 3, veh_id);
dbms_sql.define_column(cur_blk_route, 4, ser_date);
ignore := dbms_sql.execute(cur_blk_route);
LOOP
if (dbms_sql.fetch_rows(cur_blk_route) > 0) then
dbms_sql.column_value(cur_blk_route, 1, blk_route);
dbms_sql.column_value(cur_blk_route, 2, blk_run);
dbms_sql.column_value(cur_blk_route, 3, veh_id);
dbms_sql.column_value(cur_blk_route, 4, ser_date);
else
dbms_output.put_line('ERROR ');
end if;
END LOOP;
dbms_sql.close_cursor(cur_blk_route);
END Get_record;
end apc_block_assign;
null

How to assign table name for select query in loop.

Hi friends my requirement is count the no of records of all the database table which comes into an internal table ."Check the below coding". Iam fetching the tables from dd03l table into an internal table .plz give me a sujjesion how to assign a table name in select query in a loop.
SELECT tabname FROM dd09l
            INTO TABLE i_dd09l
            WHERE protokoll = 'X'.
IF sy-subrc = 0.
    SORT i_dd09l BY tabname.
ENDIF.
LOOP AT i_dd09l.
    SELECT COUNT(*) INTO val FROM i_dd09l-tabname.
    IF sy-subrc = 0.
      i_dd09l-count = val.
    ENDIF.
    MODIFY i_dd09l INDEX sy-index.
    CLEAR val.
ENDLOOP.
error : 'I_DD09L-TABNAME' is not defined in the abap dictionary as a table.

data: dy_table type ref to data,
      dy_line type ref to data,
      xfc type lvc_s_fcat,
      ifc type lvc_t_fcat,
      dy_field type ref to data.
LOOP AT i_dd09l.
perform get_structure using i_dd09l-tabname .
CREATE DATA dy_table TYPE TABLE OF (_dd09l-tab_name).
    UNASSIGN <dyn_table>.
    ASSIGN dy_table->* TO <dyn_table>.
SELECT COUNT(*) INTO val FROM <dyn_table>.
IF sy-subrc = 0.
i_dd09l-count = val.
ENDIF.
MODIFY i_dd09l INDEX sy-index.
CLEAR val.
ENDLOOP.
form get_structure using p_table.
data : idetails type abap_compdescr_tab,
xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
Get the structure of the table.
ref_table_des ?=
cl_abap_typedescr=>describe_by_name( p_table ).
idetails = ref_table_des->components.
loop at idetails into xdetails.
    clear xfc.
    xfc-fieldname = xdetails-name .
    xfc-datatype = xdetails-type_kind.
    xfc-inttype = xdetails-type_kind.
    xfc-intlen = xdetails-length.
    xfc-decimals = xdetails-decimals.
    append xfc to ifc.
endloop.
endform.                    "get_structure
Try like this hope it will work.
Regards,
madan.

Dynamic table name from Arguments in cfquery /

I'm trying to use dynamic table names in a cfc but seem to
have hit upon a wall as my calling methods from flash keep hitting
my _error methods - Code attached to show what I'm trying to
achieve; if anyone can give me some pointers it would be a great
help. I've seen numerous by using the Form with the arguments but
this is coming into a gateway used by a flash component and doesn't
work no matter how much I fiddle the code.
Thanks in advance

There was a time when I needed a dynamic query such as this.
BUT, it is very dangerous, which is why I took a few steps to make
it more secure.
1. Always use cfqueryparam and strict datatyping
2. Use listFindNoCase for known table names in the database
e.g
<cfset variables.tableNames =
"items,products,categories,blog" />
<cfif
listContainsNoCase(variables.tableNames,lCase(trim(arguments.tableName)),",")>
query here
<cfelse>
Error: Unknown table requested
</cfif>
Mikey

Dynamically assigning table name in select statement

how can i assign the table name dynamically in Select statement?
i tried following code
create or replace procedure proc1
as
x varchar2(100);
y varchar2(10);
begin
x='UNIT_MASTER';
execute immediate 'select unit_code into y from x where
rownum=1';
dbms_output.put_line(y);
end;
the procedure is created but when i execute the procedure the
error is shown in the execute immediate statement

Do the following :
Create or replace procedure pro1 as
x varchar2(100);
y varchar2(10);
begin
x := 'UNIT_MASTER';
EXECUTE IMMEDIATE 'select unit_code from '||x||' where rownum
= 1' INTO y;
dbms_output.put_line(y);

Dynamic table name, how to query?

Hi!
There is a table name that is decided dynamically. the name is:
someNameYYY where YYY denotes the client number.
I get the client number by sy-mandt and concatenate it with someNameYYY to lc_table_name but then comes the problem:
I cannot do
SELECT *
FROM lc_table_name
because I get compiler error "lc_table_name" is not defined in ABAP dictionary.
How do I query a table with the name decided dynamically?
regards
Baran

You can have do something like this :
REPORT ZTABLE_DOWNLOAD .
tables :
dd02l,    "SAP Tables
dd03l,    "Table fields
dd04t.    "R/3 DD: Data element texts
constants : c_activation_status(1) value 'A',
           c_tabclass(6) type c    value 'INTTAB',
           c_language(2) type c    value 'EN'.
type-pools : slis.
selection-screen begin of block b1 with frame title text-003.
*parameters :p_mandt like t001-mandt obligatory default '560'.
parameters :p_table like dd03l-tabname obligatory.
selection-screen end of block b1.
data:
table_desc(70) type c,
table_field like dd03l-fieldname,
total_rows type i,
t_rows(20) type c.
field-symbols:
<fs_line> type any,
<fs_field> type any.
at selection-screen.
*Check for the existence of the table
select single * from dd02l where tabname = p_table
                            and   as4local = c_activation_status.
if sy-subrc ne 0.
*Table is not active in dictionary
   message e999(zs) with 'Table is not active in dictionary'.
elseif dd02l-tabclass = c_tabclass.
*It is a structure not a table
   message e999(zs) with 'This is a structure not a table'.
endif.
start-of-selection.
perform table_data_display.
end-of-selection.
form table_data_display.
data:
l_long_type type i,
lx_struct   type ref to data,
lt_table    type ref to data,
lcl_sdescr type ref to cl_abap_structdescr,
lx_lvc_cat type lvc_s_fcat,
lt_lvc_cat type lvc_t_fcat,         "Field catalog
lx_fieldcat type slis_fieldcat_alv,
lt_fieldcat type slis_t_fieldcat_alv,
lx_layout   type slis_layout_alv,
lt_sort     type slis_t_sortinfo_alv, "Sort table
ls_sort     type slis_sortinfo_alv.
field-symbols :
<fieldcat>    type slis_fieldcat_alv,
<lt_table>    type table,
<fs>          type any,
<components> type abap_compdescr.
*Dynamic creation of a structure
create data lx_struct type (p_table).
assign lx_struct->* to <fs>.
*Get the field structure
lcl_sdescr ?= cl_abap_typedescr=>describe_by_data( <fs> ).
loop at lcl_sdescr->components assigning <components>.
*Do not display field "MANDT"
   IF sy-tabix = 1 AND <components>-name = 'MANDT'.
     CONTINUE. "next loop
   ENDIF.
*Build fieldcatalog
   lx_lvc_cat-fieldname = <components>-name.
   lx_lvc_cat-ref_table = p_table.
   append lx_lvc_cat to lt_lvc_cat.
   lx_fieldcat-fieldname   = <components>-name.
   lx_fieldcat-ref_tabname = p_table.
   append lx_fieldcat to lt_fieldcat.
endloop.
*Create an internal table
call method cl_alv_table_create=>create_dynamic_table
exporting it_fieldcatalog = lt_lvc_cat
importing ep_table        = lt_table.
assign lt_table->* to <lt_table>.
*Read the data
    select * from (p_table)
   into corresponding fields of table <lt_table>
   order by primary key.
loop at <lt_table> assigning <fs_line>.
assign component 'MANDT' of
         structure <fs_line> to <fs_field>.
      <fs_field> = p_mandt.
endloop.
if <lt_table>[] is initial.
*No table enties are existing
   message e003(zdynamictable) with p_table.
   exit.
else.
   describe table <lt_table>[] lines total_rows.
   t_rows = total_rows.
   shift t_rows left deleting leading space.
endif.
*Specify the layout
lx_layout-zebra = 'X'.
lx_layout-colwidth_optimize = 'X'.
*Display the ALV List
select single ddtext into table_desc from dd02t
where tabname eq p_table and ddlanguage eq c_language.
check not table_desc is initial.
concatenate 'Entries from table:'
p_table '(' table_desc ')' '-:' t_rows 'Entries Found' into
table_desc
separated by space.
*Start - Download the data to excel sheet by validating the file path.
data:
*lv_filename type string,
lv_fname_validate like rlgrap-filename.
*CONCATENATE 'C:\ZTABLE_DWN\' P_TABLE '.Xls' INTO LV_FILENAME.
*CONCATENATE '
Pc-p31061\Harman\Tasks\ZTABLE_DWN\' P_TABLE '.xls' INTO
CONCATENATE 'C:\ZTABLE_DWN\' P_TABLE '.xls' INTO
LV_FNAME_VALIDATE.
call function 'WS_FILE_DELETE'
exporting
   file          = lv_fname_validate
IMPORTING
RETURN        =
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE                  = ' '
CODEPAGE                      = ' '
FILENAME                      = LV_FNAME_VALIDATE
FILETYPE                      = 'DAT'
IMPORTING
FILELENGTH                    =
TABLES
   DATA_TAB                      = <lt_table>.
*call function 'GUI_DOWNLOAD'
exporting
BIN_FILESIZE                  =
   filename                      = lv_fname_validate
filetype                      = 'ASC'
write_field_separator           = 'X'
IMPORTING
FILELENGTH                    =
tables
   data_tab                      = <lt_table>.
End of Download.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
    i_background_id                   = 'ALV_BACKGROUND'
    i_grid_title                      = table_desc
    is_layout                         = lx_layout
    it_fieldcat                       = lt_fieldcat
   tables
     t_outtab                          = <lt_table>
exceptions
    program_error                     = 1
    others                            = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
clear table_desc.
endform.                    " table_data_display

Dynamic table name in select statment

Similar Messages

Maybe you are looking for