Dynamic tabstrips and table control in custom infotype
Dear Experts,
I have a requirement to create a custom infotype using tabstrips and table control. The tabstripes should also be dynamically populated. For example we have infty 8(Basic pay) used table control and 24(Qualifications) for tabstripes.
Could you please tell me how to do this. Please do the needful ASAP.
Thanks,
Chaitanya.
Moderator message - Please don't just post your requirements and ask the forum to do your work for you...especially ASAP - Thread locked
Edited by: Rob Burbank on Oct 7, 2009 4:16 PM
Hi Partha,
Pls check the threads:
Best way to store a table control into an infotype
Re: Custom Infotype with table control - Overview/List Screen
Dilek
Similar Messages
-
Table control in Custom infotype 9008
Hi,
I need to create a custom infotype with table control in it.
Normally after going to PM01 and genetete it will display all the field as individual field.
Here i need to use 4 of those field into table control format.
Is ther any special process to create table control in custom infotypes??
Thanks in advance,
SatyadevHi Satyadev,
I dont have a solution for your problem, but am curious about the intent of what you are trying to do .... the purpose of the table control is to store multiple records, so if a user enters multiple records for the four fields, how are you planning to store it in the Database (PA9nnn) table considering the key would be unique .... Unless you have defined 4*X times the number of columns in your P9nnn strcutre and hence need X number of rows in table control?
Just trying to bring up a question - so that it might help realize a solution or prospective future problem!
Cheers,
Aditya -
Table Control in Custom Infotype
Hi Everyone,
I have created a custom infotype 9200 where i have four field bunching (zband01, zgrade01, zcurrp01, zrmrks01, zbandp02...upto 10 repeations) in PS9200 structure. I have created another structure ZQ9200 with just the above four fields in the structure. This structure field names are assigned to the table control layout fields in the module pool.
I created another internal table and workarea with the same four field structure in the program. In PAI, in the 'loop with control TC', i am populating the internal table first. Then after the loop ends, i am loopinf the internal table and populating the P9200 structure.
Problem here is in pa30, if i want to create a record to IT 9200, i am entering the values in the table control but could not hold the values after I press the 'Enter' button.
PLease do help me.Hi
It would be something like this
PROCESS BEFORE OUTPUT.
* general infotype-independent operations
MODULE before_output.
CALL SUBSCREEN subscreen_empl INCLUDING empl_prog empl_dynnr.
CALL SUBSCREEN subscreen_header INCLUDING header_prog header_dynnr.
* infotype specific operations
MODULE p9991.
LOOP AT g_tabla WITH CONTROL g_d_tc INTO g_wa.
MODULE pbo_tc.
ENDLOOP.
************+
PROCESS AFTER INPUT.
* process exit commands
MODULE exit AT EXIT-COMMAND.
* processing after input
* check and mark if there was any input: all fields that
* accept input HAVE TO BE listed here
CHAIN.
FIELD p9991-begda.
FIELD p9991-endda.
MODULE input_status ON CHAIN-REQUEST.
ENDCHAIN.
* process functioncodes before input-checks *
MODULE pre_input_checks.
* input-checks: *
LOOP.
MODULE pai_tc.
ENDLOOP.
* insert check modules here:
*& Module PBO_TC OUTPUT
* text
module PBO_TC output.
MOVE-CORRESPONDING G_WA TO ZQ9991.
endmodule. " PBO_TC OUTPUT
*& Module PAI_TC INPUT
* text
MODULE pai_tc INPUT.
MOVE-CORRESPONDING zq9991 TO g_wa.
PERFORM tc_update TABLES g_tabla
USING g_wa
g_d_tc-current_line.
ENDMODULE. " PAI_TC INPUT
*& Form TC_UPDATE
* text
* -->P_G_TABLA text
* -->P_G_WA text
* -->P_G_D_TC_CURRENT_LINE text
FORM tc_update TABLES p_tabla
USING value(p_datos)
value(p_linea).
READ TABLE p_tabla
TRANSPORTING NO FIELDS
INDEX p_linea.
IF sy-subrc = 0.
MODIFY p_tabla FROM p_datos INDEX p_linea.
ELSE.
APPEND p_datos TO p_tabla.
ENDIF.
ENDFORM. " TC_UPDATE -
Table control in custom infotypes
Hi,
I have a requirement to add table control in a custom defined infotype. The fields include two date fields, one icon field, number and name fields. I also need to populate my icon field with three different icons according to the modification in the records of the table control fields.
Please suggest regarding adding icons as a field of the table control and any suggestions about this are welcome.
Thanks in advance,
SaipriyaHi,
I tried out as u said but am gettin a run time error. I had created a tablecontrol and a field by the name of icon1. when i call the function module icon_create am getting a runtime error. please help me.
This is my coding.
tables: icon.
DATA : icon_name(20) TYPE c,
icon_text(10) TYPE c.
DATA : flag TYPE i.
DATA : icon1 TYPE icon_text.
in flow logic,
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT WI_TABLE1 WITH CONTROL TABLE1.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
LOOP AT WI_TABLE1.
ENDLOOP.
module icon_pai.
module icon_pai input.
if flag = 1.
icon_name = 'ICON_GREEN_LIGHT'.
icon_text = 'green'.
CALL FUNCTION 'ICON_CREATE'
EXPORTING
name = icon_name
TEXT = icon_text
INFO = 'Status'
ADD_STDINF = 'X'
IMPORTING
RESULT = icon1
EXCEPTIONS
ICON_NOT_FOUND = 1
OUTPUTFIELD_TOO_SHORT = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
endmodule. " icon_pai INPUT
Please help me out.... -
Problem displaying 4 decimals amount in table control of custom infotype
Hi friends,
i have created a custom infotype 9404. In that i have a amount field ZBASERATE(of type CURR 13, 4 decimals).
When am trying to fill the ZBASERATE with ZOLDRATE(of type CURR 13, 2 decimals).
For example,
ZOLDRATE = 25.68
And am trying to push 25.68 into ZBASERATE, so in my PA9404 table, in the field PA9404-ZBASERATE value is stored as 25.6800 which is as required and correct.
But When i go to tcode PA30 and tried to see this value ZBASERATE. It is displaying as 2568.00 instead of 25.6800.
Which is incorrect.
Kindly help me with your valuable suggestions.
Regards
Anji ReddySolved,Thanks
-
Dynamic headers in table control
Hi,
How to create dynamic headers in table control headers?
I have to replace the header labels with internally computed headers.
I have created input fields for headers..
Regards,
KrutikaHi Krutika,
Try this out,
Populate an internal tabel with all the dates and day in it and also populate the column position in it.
say you have populated all this in an internal table it_date----fields in the internal table
1. date
2. day
3. spot1 -
column name of the table control(spot1 represents the column position)
then do this ,
LOOP AT it_date INTO wa_date.
LOOP AT SCREEN .
*WHERE screen-name = wa_date-spot.
CASE wa_date-spot.
WHEN 'SPOTS1'.
spots1 = wa_date-dd.
WHEN 'SPOTS2'.
spots2 = wa_date-dd.
WHEN 'SPOTS3'.
spots3 = wa_date-dd.
WHEN 'SPOTS4'.
spots4 = wa_date-dd.
WHEN 'SPOTS5'.
spots5 = wa_date-dd.
WHEN 'SPOTS6'.
spots6 = wa_date-dd.
WHEN 'SPOTS7'.
spots7 = wa_date-dd.
WHEN 'SPOTS8'.
spots8 = wa_date-dd.
WHEN 'SPOTS9'.
spots9 = wa_date-dd.
WHEN 'SPOTS10'.
spots10 = wa_date-dd.
WHEN 'SPOTS11'.
spots11 = wa_date-dd.
WHEN 'SPOTS12'.
spots12 = wa_date-dd.
WHEN 'SPOTS13'.
spots13 = wa_date-dd.
WHEN 'SPOTS14'.
spots14 = wa_date-dd.
WHEN 'SPOTS15'.
spots15 = wa_date-dd.
WHEN 'SPOTS16'.
spots16 = wa_date-dd.
WHEN 'SPOTS17'.
spots17 = wa_date-dd.
WHEN 'SPOTS18'.
spots18 = wa_date-dd.
WHEN 'SPOTS19'.
spots19 = wa_date-dd.
WHEN 'SPOTS20'.
spots20 = wa_date-dd.
WHEN 'SPOTS21'.
spots21 = wa_date-dd.
WHEN 'SPOTS22'.
spots22 = wa_date-dd.
WHEN 'SPOTS23'.
spots23 = wa_date-dd.
WHEN 'SPOTS24'.
spots24 = wa_date-dd.
WHEN 'SPOTS25'.
spots25 = wa_date-dd.
WHEN 'SPOTS26'.
spots26 = wa_date-dd.
WHEN 'SPOTS27'.
spots27 = wa_date-dd.
WHEN 'SPOTS28'.
spots28 = wa_date-dd.
WHEN 'SPOTS29'.
spots29 = wa_date-dd.
WHEN 'SPOTS30'.
spots30 = wa_date-dd.
WHEN 'SPOTS31'.
spots31 = wa_date-dd.
ENDCASE.
Hope this helps you,
Regards,
Abhijit G. Borkar -
Difference between ALV and Table control
Hi folks,
i want to know the major differences between AlV and table controls.
i know that table control is designed in screen painter, but i want to know the major diff between Table control and ALV.
helpful answers will be rewarded.
Regards,
NaveenHi Naveen,
Basically ALV is a way to display the output and Table Control is designed in screen painter through which you can get entries in Table Control, can delete some records etc for further processing and its not use only for Display.
<b>ALV is Application List viewer:-</b>
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
<b>TABLE CONTROL:-</b>
ABAP offers two mechanisms for displaying and using table data in a screen. These mechanisms are table controls and step loops. Table controls and step loops are types of screen tables you can add to a screen in the Screen Painter.
Rewards if useful.
Regards,
Shilpi -
How to add a field and table control to BP transaction.
Hi,
I have a requirement to add a field and table control to the 'Control data' tab of the Transaction BP.
Can some on please help me if having a solution and with any relavant documents.
Thanks in advance.
Raj & Khader.Also explore with EEWB tcode.
Refer this threads
Re: EEWB
Created New fields in Business Activity with EEWB
Cheers
Manohar -
Dynamic extending of table control in bdc
hi frnds
I want an example of dynamic extension of table control i.e
for example:In xk01 there is table control with bank details.
i have to upload upto 10 bank details of a record. I have searched in forum.I got the hint of 'p+' but i cant understand that.so please send me sample code
Thanks
RaghavHai,
Chech this sample code.
Check the below link.
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
THis is example to upload the Bank details of the Vendor which has the TC.
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
REPORT zmm_pr_upload_mat
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Standard Include for Selection Screen
INCLUDE bdcrecx1.
Internal Table for Upload Data
DATA: BEGIN OF i_pr OCCURS 0,
Header Screen
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
lpein(001), " Category of Del Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
Item Details
matnr(018), " Material No
menge(017), " Quantity
badat(010),
frgdt(010),
preis(014), " Valuation Price
waers(005), " Currency
peinh(005),
wepos(001),
repos(001),
sakto(010), " GL Account
kostl(010), " Cost Center
bnfpo(005),
END OF i_pr.
Internal Table for header Data
DATA: BEGIN OF it_header OCCURS 0,
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
END OF it_header.
Internal Table for Item Data
DATA: BEGIN OF it_item OCCURS 0,
sno(3), " SNo
matnr(018), " Material No
menge(017), " Quantity
preis(014), " Valuation Price
sakto(010), " GL Account
kostl(010), " Cost Center
END OF it_item.
Data Variables & Constants
CONSTANTS : c_x VALUE 'X'. " Flag
DATA : v_l(2), " Counter
v_rowno(5), " Row No
v_2(2), " Counter
v_rows LIKE sy-srows, " Rows in TC
v_field(45). " String
Parameters
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
Start of Selection
START-OF-SELECTION.
Open the BDC Session
PERFORM open_group.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_pr
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT i_pr BY sno.
LOOP AT i_pr.
MOVE-CORRESPONDING i_pr TO it_item.
APPEND it_item.
CLEAR it_item.
AT END OF sno.
READ TABLE i_pr INDEX sy-tabix.
MOVE-CORRESPONDING i_pr TO it_header.
APPEND it_header.
CLEAR it_header.
ENDAT.
ENDLOOP.
SORT it_header BY sno.
SORT it_item BY sno.
v_rows = sy-srows - 6.
Upload the Data from Internal Table
LOOP AT it_header.
Header Data
PERFORM bdc_dynpro USING 'SAPMM06B' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-BEDNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-BSART'
it_header-bsart.
PERFORM bdc_field USING 'RM06B-EPSTP'
it_header-epstp.
PERFORM bdc_field USING 'EBAN-KNTTP'
it_header-knttp.
PERFORM bdc_field USING 'RM06B-EEIND'
it_header-eeind.
PERFORM bdc_field USING 'RM06B-LPEIN'
it_header-lpein.
PERFORM bdc_field USING 'EBAN-WERKS'
it_header-werks.
PERFORM bdc_field USING 'EBAN-LGORT'
it_header-lgort.
PERFORM bdc_field USING 'EBAN-EKGRP'
it_header-ekgrp.
PERFORM bdc_field USING 'EBAN-MATKL'
it_header-matkl.
PERFORM bdc_field USING 'EBAN-BEDNR'
it_header-bednr.
PERFORM bdc_field USING 'EBAN-AFNAM'
it_header-afnam.
Item Details
v_l = 0.
To add no. of rows
v_2 = 0 .
As the screen is showing 13 rows defaulted to 130
v_rowno = 130 .
LOOP AT it_item WHERE sno = it_header-sno.
v_l = v_l + 1.
IF v_l = 14 .
IF v_2 = 12 .
v_2 = 12 .
v_l = 2 .
From second time onwards it is displaying 12 rows only
v_rowno = v_rowno + 120 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ELSE.
V_2 initialized to 12 for second screen purpose
v_2 = 12 .
v_l = 2 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno .
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ENDIF.
ENDIF.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
CLEAR v_field.
CONCATENATE 'EBAN-MATNR(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-matnr.
CLEAR v_field.
CONCATENATE 'EBAN-MENGE(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-menge.
PERFORM bdc_dynpro USING 'SAPMM06B' '0102'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-PREIS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-PREIS'
it_item-preis.
PERFORM bdc_dynpro USING 'SAPMM06B' '0505'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBKN-SAKTO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'EBKN-SAKTO'
it_item-sakto.
Cost Center
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'COBL-KOSTL'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'COBL-KOSTL'
it_item-kostl.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
Call The Transaction
PERFORM bdc_transaction USING 'ME51'.
ENDLOOP.
Close the BDC Session
PERFORM close_group.
with regards.
sowjanya.b. -
Query on ABAP List Viewer and Table Control?
Hi all,
I was trying to solve the exercises in these areas....but was unable to do as some of the concepts were not clear to me as I'm new to this field.
So Can any one help me out in giving me the Notes or attachments on the ABAP List Viewer(A.L.V.) and Table Control.
My ID: [email protected]
Waiting for a reply...
A New Entrant in ABAP.
Message was edited by:
saikumar bHi saikumar,
I just start to work with Abap too. All links i Know:
http://www.erpgenie.com/abap/controls/alvgrid.htm
http://www.abapfans.hpg.ig.com.br/links.htm
http://abap4.tripod.com/index..html
http://paginas.terra.com.br/educacao/abap/
http://www.sdn.sap.com/
http://www.sap-img.com/
http://www.planetsap.com/Tips_and_Tricks.htm
http://www.abap4.com.br/
http://www.erpgenie.com/sap/abap/index.htm
Good lucky -
What is the difference between Alv Grid and Table Control?Explain in detail..
Table control is a screen table to display table data in a screen. You can add table control to a screen in the Screen Painter. The typical flow-logic to process table control is:
LOOP AT <internal table> CURSOR <scroll-var>
[WITH CONTROL <table-control> ]
[FROM <line1> ] [TO <line2> ].
...<actions>...
ENDLOOP.
ALV Grid is a SAP Technology to display a set of data on the output screen. For example if you have selected some SAP tables and processed these data in a way you want to display, then you can pass the internal table to the ALV Grid and it will be displayed on the result screen as ALV Grid. See example in SE16 result. -
Table type not defined for table control "T_CONTROL" (Custom table)
Hi All,
I m facing a problem in ITS mobile service.
The Table control designed by me in R/3 (Module pool program) is
not getting displayed in ITS mobile page.
It is giving me an error "Table type not defined for table control "T_CONTROL" (Custom table) ".
Can you please let me how this issue can be resolved.
With Regards,
MaheshCONTROLS: table_ctr TYPE TABLEVIEW USING SCREEN '0010'.
try using this....
Regards
Vasu -
Problem in Tabstrip Control in Custom Infotype Creation
Hi All,
Can any body tell me how to process with Tabstrip Control in an Custom Infotype.
Iam creating Customizing Infotype With Tabstip Control.The Tabstrip Control have 2tabs.Each tab have Custom some fields.
But iam not able activating the sample Tabstrip control.
Can u tell me how to approach to create this in Modulepool programming for my Custom Infotype.
Points wil be rewarded.
Thanks,
N.L.NarayanaHello Swapna,
Thanks for your reply.
This is my code for tabstrip control.
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
WHEN 'BOOK'.
tabb1-prog = 'ZAXOMM005_V1'.
tabb1-dynnr = 1.
tabb1-activetab = 'TABS1'.
option = '1'.
WHEN 'SUMM'.
tabb1-prog = 'ZAXOMM005_V1'.
tabb1-dynnr = 2.
tabb1-activetab = 'TABS2'.
option = '2'.
WHEN 'POST'.
tabb1-prog = 'ZAXOMM005_V1'.
tabb1-dynnr = 3.
tabb1-activetab = 'TABS3'.
option ='3'.
*CH01 start
WHEN 'RSET'.
tabb1-prog = 'ZAXOMM005_V1'.
tabb1-dynnr = 4.
tabb1-activetab = 'TABS4'.
option = '4'.
ENDCASE.
case option.
when '1'.
IF SSCRFIELDS-UCOMM = 'ONLI'.
if p1_werks is initial or p1_lgort is initial or
p1_bstar is initial or p1_gjahr is initial.
message e000(vz) with text-001.
endif.
ENDIF.
when '2'.
IF SSCRFIELDS-UCOMM = 'ONLI'.
if p2_gjahr is initial.
message e000(vz) with text-005.
endif.
ENDIF.
when '3'.
IF SSCRFIELDS-UCOMM = 'ONLI'.
if p3_gjahr is initial.
message e000(vz) with text-005.
endif.
ENDIF.
*CH01 start
when '4'.
IF SSCRFIELDS-UCOMM = 'ONLI'.
if s4_werks is initial or p4_gjahr is initial.
message e000(vz) with text-001.
endif.
if p4_book is initial and
p4_summ is initial.
message e000(vz) with text-022.
endif.
ENDIF.
endcase.
I can give you some more information.
If I execute from program it is working fine, if I execute from T.code it is not working properly.
Regards.
Krishna. -
Modpool Tabstrip control and Table control
Hi All,
pls mail me step by step procedure fo rmodule pool programming using Table control and Tabsrip.
Thanks in Advance.hi,
check the below links
http://www.sapgenie.com/abap/example_code.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
check these links
http://www.allsaplinks.com/dialog_programming.html
http://sappoint.com/abap.html
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/code/archives.asp?i=10&t=450&a=t
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com.
http://www.sap-img.com/abap/
http://sap.mis.cmich.edu/sap-abap/abap09/
http://www.sapbrain.com/TUTORIALS/default.html
steploops
http://help.sap.com/saphelp_nw04/helpdata/en/d1/801c13454211d189710000e8322d00/content.htm
http://sap.niraj.tripod.com/id28.html
If you need further info on this shoot me a test mail to [email protected] i will farward the material to you
If you find it useful mark the points
Regards,
Naveen -
Hiding table fields in custom infotype
HI guyz,
i have created a custom infotype which has 2 subtypes . certain fields should not be displayed when we select the subtypes. i have used the code below. the screen contains a table.
MODULE hide_FIELDS OUTPUT.
IF p9555-subty = '1'.
LOOP AT SCREEN.
IF screen-group2 = 'ABC'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF p9555-subty = '2'.
LOOP AT SCREEN.
IF screen-group2 = 'XYZ'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE. " hide_FIELDS OUTPUT
the fields which are not in the table are not getting displayed as required but the fields in the table still appear on the screen(they are grayed out). i do not want them to appear on the screen. can anyone help me with this. Thanks in advance.Hi Madhu Reddy , instead of using screen-invisible = '1' , u can try this .
MODULE sereen_modify OUTPUT.
DATA: COL TYPE CXTAB_COLUMN.
LOOP AT TC-COLS into COL. " TC is ur Table Control
IF col-screen-group1 EQ '007'. " Modification group1 is say 007.Also u can add other checks like pnnnn-subty = 1 here .
col-invisible = '1'.
col-screen-output = '0'.
modify TC-COLS from COL index COL-INDEX.
ENDIF.
ENDLOOP.
ENDMODULE. " Call this module in ur Flow Loic PBO.
*Reward Points If Helpful
Maybe you are looking for
-
I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!
-
I have multiple VI's that are built into exe's. They communicate with shared variables. I launch one exe manually, and it uses the System Exec VI to launch the other two. The main vi (exe) runs each time it is requested and quits (as it was dsigned t
-
Send APDU to the card from applet on the card
Hi I would like to send an APDU command to the card, from an applet on the actual card, in the same way I do from a PC with a card reader. The applet would first have been triggered by an external application through a card reader. I have seen this d
-
my sister has been having troulbe with her ipod whenever she plugs it in the computer, she gets a warning box saying something like search and fix but when she clicks on search and fix, which is recommeneded, it says that the itunes cant do it right
-
What is this and why is it slowing my computer down?
My Macbook has been running really slow today, so I went to Activity Monitor to see what's hogging the memory and it seems that "AddressBookShari" is the culprit. I assume it's some sort of address book sharing, but I don't know. It's taking 570+ MB