Dynamically adding form items
Hi All,
I am facing problem while adding the form items to the form
dynamically it get distorted and form items not in proper
alignment.This issues is resolve when i revisit the same page
again.
Thanks, in advance.
Notice that using array index "i" screws up the formatting of your post. It makes the font switch to italics! Anyway...I think what you want to be doing is this:
String[] s={"a","b","c"};
for(int j=0 ; j<s.length ; j++) {
JButton b = new JButton(s[j]);
this.getcontentPane().add(b);
Similar Messages
-
Referring to dynamically created form items
I have a requirement where I do not know how many rows are going to be added into a table from a form. What I have done is used javascript to dynamically create form fields. This is along the same lines as a tabular form, however it should not save any of the data until the whole page is submitted.
My problem is, how do I then refer to these form items within a PL/SQL procedure?
Below is the piece of javascript that creates new rows on the form (the options for the select item are fed in using ajax). And following that, the pl/sql loop that I have attempted to use which doesn't work.
NOTE: The onchange attribute on each of the form elements was to try to set a session state variable for each of the items. I got this from the following blog post.
http://deneskubicek.blogspot.com/2009/01/ajax-setting-item-session-state.html
Javascript
var objectFormCount = 0
function addObjectForm() {
var newFormHTML = '<tr>';
newFormHTML = newFormHTML + '';
newFormHTML = newFormHTML + '<td><select onchange="f_setItem(this.id)" name="f01" id="f01_' + objectFormCount + '"></select></td>';
newFormHTML = newFormHTML + '<td><input onchange="f_setItem(this.id)" type="text" name="f02" id="f02_' + objectFormCount + '"/></td>';
newFormHTML = newFormHTML + '<td><input onchange="f_setItem(this.id)" type="text" name="f03" id="f03_' + objectFormCount + '"/></td>';
newFormHTML = newFormHTML + '<td><input onchange="f_setItem(this.id)" type="text" name="f04" id="f04_' + objectFormCount + '"/></td>';
newFormHTML = newFormHTML + '</tr>';
$('#BackEndObjectTable').append(newFormHTML);
objectFormCount++;
PL/SQL
FOR i IN 0..l_oracle_script_count
LOOP
--DEBUGGING VARS
l_test1 := v('f01_' || i);
l_test2 := v('f02_' || i);
l_test3 := v('f03_' || i);
l_test4 := v('f04_' || i);
l_test5 := i+1;
INSERT INTO MIGRATION_B_OBJECT (MIGRATION_B_ID,TARGET,SCHEMA,SCRIPT_LOCATION,SCRIPT_NAME,RUN_ORDER)
VALUES (l_mig_seq,v('f01_' || i),v('f02_' || i),v('f03_' || i),v('f04_' || i),i+1);
END LOOP;
Edited by: Dopple on 28-Jul-2011 01:59 - text was stripped from the body of the post.For anyone with the same requirements. What I had to do was add the value of each form element into a temp table which was basically held key/value pair (form item/value) along with the username, the table that is to be updated and the row number.
Once the actual page was saved, the procedure built up an insert sql string from the values in the temp table and inserted each row.
Works a charm, although spitting the data back out into the dynamic forms is going to be a chore!!!! -
Passing values to form bean string array from dynamic added textboxes
Hi,
I am unable to pass values to form bean string array from a jsp in which I have incorporated dynamically adding of textboxes in javascript.
I have given add/delete row option in the jsp. If there is single row, this is working fine. But after adding a row, I am not able to either do any validations on added textboxes or pass the values to the String array form bean variable.
code snippet:
var cell6 = row.insertCell(4);
var element5 = document.createElement("input");
element5.type = "text";
element5.className = "formtext1";
element5.size = "5";
element5.value = "00.00";
element5.name= "qty"; // this is a string array of the form bean.
element5.onchange=function() {checkNumeric(this);};
cell6.appendChild(element5);
<html:text styleClass="formtext1" property="qty" value="" size="5" styleId="qty" onchange="checkNumeric(this)"/></td>
form bean declaration
private String[] qty; Please help.
Edited by: j2eefresher on Jan 12, 2010 11:23 PMShivanand,
There's no need to post that much code when you could create a very short test case that demonstrates only the problem you are having.
You're using &NAME. notation on something that isn't a page or application item. You can't reference PL/SQL variables that way (or any other way) outside the PL/SQL scope. For your situation, you could create a page item named P55_DOCID and assign it a value in the PL/SQL process (:P55_DOCID := DOCID;), then reference &P55_DOCID. in HTML areas like the success message.
Scott -
Adding rows in web dynpro ABAP Dynamic Interactive form.
Hi Experts,
I am having problem in web dynpro ABAP Dynamic Interactive form.
This is my scenario....
I have a dynamic interactive form that has buttons to add and remove rows in a table. It works fine when I preview it , but when I render, view or save it using ADS, it no longer works. The "add" button actually does instantiate more repeating rows, because I put some trace messages in to count them, but the added rows are not displayed. How do I make them visible?
In web dynpro java we write some coding in modify view to set the pdf form as dynamic
IWDInteractiveForm iForm =
(IWDInteractiveForm)view.getElement("<ID>");
iForm.setDynamicPDF(true);
simillarly what we need to write in web dynpro ABAP.
Please give me solution for the same.
Thanks,
Sathishhi all,
expecting reply from u all. pls help me and give some sugesstion.
regards,
vinoth. -
Add Item In Dynamic List form ...
Hello ,
I have created a dynamic list form using C# webpart in SharePoint 2013 .. Now it is creating List new Item form based on list view selected items ...
I want to create functionality to add the list item .. how can I achieve this.?
I am confused because list is creating dynamic controls and having dynamic id's ..then how can i get reference of all controls from dynamic form ..
Thanks in Advance..Hi,
I’m not quite sure about what your requirement is, please provide more detailed information such
as screen capture or code, it will be easier for others to find a solution for you.
Best regards
Patrick Liang
TechNet Community Support -
Dynamic Actions on tabular form items
Has anyone had success with using dynamic actions on a tabular form item?
When I create a dynamic action for the selection type I believe I want to use DOM Object, I am just not sure what ID I then need to put into the DOM Object field.
Any help would be greatly appreciated
Regards
MarkIf you wish to use JavaScript with tabular forms, I suggest looking at APEX_ITEM column types. They allow you to specify the JavaScript array number of any given column in your tabular form and rely on it. Then as you loop through your rows you can positively identify the element.
Example:
Original query:
select colA, colB from myTable;
select apex_item.text(1, colA, 20,20) as myText,
apex_item.select_list_from_lov(2, colB, 'LOV_MYLOV', 0, 'NO') myLookup
from myTable;I also highly recommend Firebug for Firefox. It will allow you to drill down into the DOM on any page to see the element identifications as the browser sees them. Definitely the best browser plugin for web development. -
How to update a report from a form on the same page when form item changes
I have a portal form from a table and a portal SQL report with a bind variable on a page. I want the report to get updated with details based upon what was selected from a form item. The form item is a selection from a dynamic LOV. Whenever the form item gets changed, the report should get updated to reflect the change. Can this be done using a javascript ONCHANGE event?
Oracle Portal Version is 10.1.2.2.0.Your applet can open an URLConnection and read directly a document from your webserver.
public String readText() {
java.net.HttpURLConnection conn = (java.net.HttpURLConnection)myURL.openConnection(); ...
}So using JavaScript on your page, you might call readText() to fill that textarea.
The interesting link you gave, handled the JavaScript/Applet interaction. Test that with just return "Hello";.
The real programming is more interesting. -
Reading the Data from dynamically added rows of a table...
Hi,
I am using adobe interactive form (WD ABAP) in which i am adding the table rows dynamically (using Jscript code). I have to fech these data into an internal table. But I can read only the first row data..
Also While adding rows dynamically the same data is repeating for the consecutive rows..
I have found many similar posts in sdn, but i cannot get the solution. They have mentioned about adding in WDDOINIT method. Can anyone explain me what should be done,..?
1) How to solve repeatative data while adding rows..?
2) How to read dynamically added row data during runtime into internal table..?
Thanks,
Surya.Discussed @ SDN lot of time before. Have a look at any of below threads:-
Dynamic table in interactive form...
Make dynamic tables in Adobe Interactive forms
Adding Rows dynamically upon clicking the button
How to get values to WebDynpro ABAP from dynamic table?
Chintan -
Dynamic adding of components (doesn't work when programmatically)
Hi, I don't understand, why this doesn't work. I'll explain it on this example:
import java.util.concurrent.ScheduledThreadPoolExecutor;
import java.util.concurrent.TimeUnit;
import javafx.application.Application;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.scene.Group;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.paint.Color;
import javafx.stage.Stage;
public class NewFXMain extends Application {
Group root;
public static void main(String[] args) {
Application.launch(NewFXMain.class, args);
@Override
public void start(Stage primaryStage) {
primaryStage.setTitle("Hello World");
root = new Group();
Scene scene = new Scene(root, 300, 250, Color.LIGHTGREEN);
Button btn = new Button();
btn.setLayoutX(100);
btn.setLayoutY(80);
btn.setText("Add button now");
btn.setOnAction(new EventHandler<ActionEvent>() {
public void handle(ActionEvent event) {
addButton();
root.getChildren().add(btn);
primaryStage.setScene(scene);
primaryStage.setVisible(true);
System.err.println("Number of buttons before: "+root.getChildren().size());
ScheduledThreadPoolExecutor executor = new ScheduledThreadPoolExecutor(1);
executor.schedule(new MyTask(), 5, TimeUnit.SECONDS);
private void addButton() {
System.err.println("Button adding");
root.getChildren().add(new Button("YEAH"));
System.err.println("Number of buttons after: "+root.getChildren().size());
class MyTask implements Runnable {
public void run() {
addButton();
}There are two ways how a new button can be added. Either by clicking on existing button or programmatically by the program itself after 5 seconds.
If you add it by button, there is no problem. The error print is:
Number of buttons before: 1
Button adding
Number of buttons after: 2
But if you just wait, then the error print is:
Number of buttons before: 1
Button adding
and no button is added. In fact, the error printing after the adding isn't performed either.
I'd like to ask if there is some solution for this because I'd love to do some changes by schedulers. Thx
Edited by: 876949 on 14.8.2011 9:09
Edited by: 876949 on 14.8.2011 9:11No, these are not error messages, they are just for purpose of example. Here it doesn't matter whether err or out... (yes, 'out' would be better ;)
But thanx, it's working. By the way, I am creating scheduler for task lists. They are supposed to be printed dynamically in specific time (or periodically). For example: at 5 o'clock I need to print 5 items of some list and every 3 hours I need to print 3 items of another list etc. - so it's quite dynamic with regard to component adding (No, I don't want to use some sort of ListView, I want interactive printing: one item on screen at a moment). I'll try to work your solution into my code.
Edit: So either it's not possible to use this for the purpose of my app or it will be really cumbersome. Maybe it would be easier to draw some rectangles with mouse listeners...
Edit: So I finally got around it. In the end, I won't use dynamic adding as intended. It's working and that's important.
Edited by: 876949 on 14.8.2011 12:48
Edited by: 876949 on 15.8.2011 5:21 -
Dynamic binding of items in sap.m.Table using XML views
Dear SAPUI5 guru's,
Let's start by saying I'm an ABAP developer who's exploring SAPUI5, so I'm still a rookie at the time of writing. I challenged myself by developing a simple UI5 app that shows information about my colleagues like name, a pic, address data and their skills. The app uses the sap.m library and most of the views are XML based which I prefer.
The data is stored on an ABAP system and exposed via a gateway service. This service has 2 entities: Employee and Skill. Each employee can have 0..n skills and association/navigation between these 2 entities is set up correctly in the service. The data of this service is fetched from within the app using a sap.ui.model.odata.ODataModel model.
The app uses the splitApp control which shows the list of employees on the left side (master view). If a user taps an employee, the corresponding details of the employee entity are shown on the right (detail view).
Up till here everything is fine but I've been struggling with my latest requirement which is: show the skills of the selected employee in a separate XML view when the user performs an action (for the time being, I just created a button on the detail view to perform the action). After some hours I actually got it working but I doubt if my solution is the right way to go. And that's why I'm asking for your opinion here.
Let's explain how I got things working. First of all I created a new XML view called 'Skills'. The content on this view is currently just a Table with 2 columns:
<core:View xmlns:core="sap.ui.core" xmlns:mvc="sap.ui.core.mvc" xmlns="sap.m"
controllerName="com.pyramid.Skills" xmlns:html="http://www.w3.org/1999/xhtml">
<Page title="Skills"
showNavButton="true"
navButtonPress="handleNavButtonPress">
<content>
<Table
id="skillsTable">
<columns>
<Column>
<Label text="Name"/>
</Column>
<Column>
<Label text="Rating"/>
</Column>
</columns>
</Table>
</content>
</Page>
</core:View>
The button on the Detail view calls function showSkills:
showSkills: function(evt) {
var context = evt.getSource().getBindingContext();
this.nav.to("Skills", context);
var skillsController = this.nav.getView().app.getPage("Skills").getController();
skillsController.updateTableBinding();
Within 'this.nav.to("Skills", context);' I add the Skills view to the splitApp and set its bindingContext to the current binding context (e.g. "EmployeeSet('000001')"). Then I call function updateTableBinding in the controller of the Skills view which dynamically binds the items in the table based on the selected employee. So, when the ID of the selected employee is '000001', the path of the table's item binding should be "/EmployeeSet('000001')/Skills"
updateTableBinding: function(){
var oTemplate = new sap.m.ColumnListItem(
{cells: [
new sap.m.Text({text : "{Name}"}),
new sap.m.Text({text : "{Rating}"})
var oView = this.getView();
var oTable = oView.byId("skillsTable");
var oContext = oView.getBindingContext();
var path = oContext.sPath + "/Skills";
oTable.bindItems(path, oTemplate);
Allthough it works fine, this is where I have my first doubt. Is this the correct way to bind the items? I tried to change the context that is passed to this.nav.to and wanted it to 'drill-down' one level, from Employee to Skills, but I couldn't manage to do that.
I also tried to bind using the items aggregation of the table within the XML declaration (<Table id="skillsTable" items="{/EmployeeSet('000001')/Skills}">). This works fine if I hard-code the employee ID but off course this ID needs to be dynamic.
Any better suggestions?
The second doubt is about the template parameter passed to the bindItems method. This template is declared in the controller via javascript. But I'm using XML views! So why should I declare any content in javascript?? I tried to declare the template in the XML view itself by adding an items tag with a ColumnListItem that has an ID:
<items>
<ColumnListItem
id="defaultItem">
<cells>
<Text text="{Name}"/>
</cells>
<cells>
<Text text="{Rating}"/>
</cells>
</ColumnListItem>
</items>
Then, in the updateTableBinding function, I fetched this control (by ID), and passed it as the template parameter to the bindItems method. In this case the table shows a few lines but they don't contain any data and their height is only like 1 mm! Does anyone know where this strange behaviour comes from or what I'm doing wrong?
I hope I explained my doubts clearly enough. If not, let me know which additional info is required.
Looking forward to your opinions/suggestions,
Rudy Clement.Hi everybody,
I found this post by searching for a dynamic binding for well acutally not the same situation but it's similar to it. I'm trying to do the following. I'm having a list where you can create an order. On the bottom of the page you'll find a button with which you're able to create another order. All the fields are set to the same data binding ... so the problem is if you've filled in the values for the first order and you'll press the button you'll get the same values in the second order. Is it possible to generate a dynamic binding?
I'm going to post you a short code of what I'm meaning:
<Input type="Text" value="{path: 'MyModel>/Order/0/Field1'}" id="field1">
<layoutData>
<l:GridData span="L11 M7 S3"></l:GridData>
</layoutData>
</Input>
As you can see I need to set the point of "0" to a dynamic number. Is there any possibility to reach this???
Hope you can help
Greetings
Stef -
How to identify listeners types for forms, items and events in addon wizard
Dear users,
I have developed a sample addon through B1DE wizards and successfully installed and connected the addon and can view menu and form of my addon. Since i am new to this, i didn't add any listeners to my form, items and events because i don't know what type of listeners to add and what coding to add after adding listeners.
If anyone describe me how to work with listeners, i would be glad. My form has basic fields like BPcode, BPname, Docnum, Itemcode, Item name, quanity, price, total etc. Uptil now my addon form has no function of getting list of BP and Items and calculating the totals based on price and quantity but it has some basic functions like add, update,del, add print view, next record previous, record next etc. which are due to object registration and auto-code generation wizards i think.
Please help me in adding listeners and their relevant coding.
Thanks in advance.Thanks for reply, Actually I am asking about listeners in the wizard of B1DE, code generator wizard. I think you are telling me about adding listeners directly in the vb.net. Kindly, tell me first, what event type I should add for item, form etc while adding listeners during the wizard. Or If you know some link where event types of listeners are decribed, you are more than welcome.
Thanks,
Farhan -
Using Bapi_salesorder_change adding a item, deleting a item,Quanty change
I need help on Bapi_salesorder_change.
I have a table control in which there will be data of a particular sales document no, items, quantity, sales unit. When user changes the quantity, or adds a line item or deletes a line item and the press the save button bapi_salesorder_change should trigger and should change the order as the user changes.
Can u help how to write code for this three conditions
1> adding line item.
2> deleting a line item.
3> changing the quantity.
using bapi_salesorder_change
Can i use the same bapi for three conditions?
Please help me in this as soon as possible.
I thank them in advanceHello Geeks,
i am using this bapi for updating my item quantity no....
but the bapi return msg say tat its not changing....
i think i may did some mistake pls anyone can rectify it....
i hv attached my code below......
*For line item
TYPES :BEGIN OF y_t_vbap,
vbeln TYPE vbeln_va, "sales Document
posnr TYPE posnr_va, "Item no of SD document
matnr TYPE matnr, "Material No
zmeng TYPE dzmeng , "Target qty in Sales unit
spart TYPE spart, "division
message TYPE BAPI_MSG,
kwmeng type kwmeng, "cummulative order qty
END OF y_t_vbap.
TYPES : y_t_itemin TYPE bapisditm,
y_t_return TYPE bapiret2,
y_t_headerx TYPE bapisdh1x.
TYPES: BEGIN OF y_t_logdata,
lno TYPE lineno, "Lineno
field TYPE fieldname, "Field Name
value TYPE lmon_fvalue, "Field Value
message TYPE bapi_msg, "Messages
END OF y_t_logdata.
Internal table declaration
DATA: "y_i_vbak TYPE STANDARD TABLE OF y_t_vbak,
y_i_vbap TYPE STANDARD TABLE OF y_t_vbap,
y_i_headerx TYPE STANDARD TABLE OF bapisdh1x,
y_i_itemin TYPE STANDARD TABLE OF bapisditm ,
y_i_iteminx TYPE STANDARD TABLE OF bapisditmx,
y_i_return TYPE STANDARD TABLE OF y_t_return,
y_i_logdata TYPE STANDARD TABLE OF y_t_logdata,
y_i_bapiret TYPE STANDARD TABLE OF bapiret2.
Table type declaration
TYPES: y_tt_vbap TYPE STANDARD TABLE OF y_t_vbap ,
y_tt_logdata TYPE STANDARD TABLE OF y_t_logdata.
Work Area declaration.
DATA: y_wa_vbap TYPE y_t_vbap,
y_wa_itemin TYPE bapisditm ,
y_wa_iteminx TYPE bapisditmx,
y_wa_headerx TYPE bapisdh1x,
y_wa_return TYPE y_t_return,
y_wa_logdata TYPE y_t_logdata,
y_wa_event TYPE slis_alv_event,
y_wa_event1 TYPE slis_t_event,
y_wa_bapiret TYPE bapiret2.
Variables declaration.
DATA: y_i_event TYPE slis_t_event,
y_v_success TYPE i , "For Success
y_v_error TYPE i , "For Error
y_v_sno TYPE char30 ,
y_v_eno TYPE char30 ,
y_v_msg TYPE char100 . "error msg
Constants declaration.
constants : y_k_x type char1 value 'X',
y_k_u type char1 value 'U',
y_k_e type char1 value 'E'.
SELECTION SCREEN LAYOUT
SELECTION-SCREEN:BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: COMMENT 3(18) text-003.
PARAMETERS : y_p_vbln TYPE vbak-vbeln OBLIGATORY.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN : END OF BLOCK b1.
START-OF-SELECTION.
START-OF-SELECTION.
WRITE: text-002.
END-OF-SELECTION.
END-OF-SELECTION.
SELECT vbeln
posnr
matnr
zmeng
spart
FROM vbap
INTO TABLE y_i_vbap
WHERE vbeln = y_p_vbln.
LOOP AT y_i_vbap INTO y_wa_vbap.
y_wa_vbap-zmeng = 2 + y_wa_vbap-zmeng.
MODIFY y_i_vbap FROM y_wa_vbap INDEX sy-tabix.
ENDLOOP.
PERFORM y_f_update USING y_i_vbap.
*& Form y_f_update
POPULATE BAPI DATA AND RUN BAPI
FORM y_f_update USING y_p_vbap TYPE y_tt_vbap.
CLEAR: y_i_headerx, y_i_itemin, y_i_iteminx,
y_i_return, y_i_bapiret.
REFRESH: y_i_itemin, y_i_iteminx, y_i_return, y_i_bapiret.
LOOP AT y_i_vbap INTO y_wa_vbap.
MOVE y_wa_vbap-zmeng TO y_wa_itemin-target_qty.
MOVE y_wa_vbap-posnr TO y_wa_itemin-itm_number.
APPEND y_wa_itemin TO y_i_itemin.
ENDLOOP.
*Update the Bapi Itnernal tables
y_wa_headerx-updateflag = y_k_u .
APPEND y_wa_headerx TO y_i_headerx.
LOOP AT y_i_vbap INTO y_wa_vbap.
y_wa_iteminx-itm_number = y_wa_vbap-posnr.
y_wa_iteminx-target_qty = y_k_x .
y_wa_iteminx-updateflag = y_k_u .
APPEND y_wa_iteminx TO y_i_iteminx .
ENDLOOP .
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = y_wa_vbap-vbeln
order_header_inx = y_wa_headerx
TABLES
return = y_i_return
order_item_in = y_i_itemin
order_item_inx = y_i_iteminx.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
CLEAR y_i_vbap.
IF y_i_return is not initial.
LOOP AT y_i_return INTO y_wa_return where TYPE = y_k_e .
MOVE y_wa_return-message TO y_wa_vbap-message .
Append y_wa_vbap to y_i_vbap.
y_v_success = y_v_success + 1.
ENDLOOP.
ENDIF.
y_wa_event-name = 'TOP_OF_PAGE'.
y_wa_event-form = 'Y_FD_TOP_OF_LIST'.
APPEND y_wa_event TO y_i_event.
CLEAR y_wa_event.
CALL FUNCTION 'ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_tabtypename1 = 'Y_T_VBAP'
it_events1 = y_i_event[]
TABLES
t_outtab1 = y_i_vbap[]
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " y_f_vbap
*& Form Y_FD_TOP_OF_LIST
FORM y_fd_top_of_list.
MOVE: y_v_success TO y_v_sno,
y_v_error TO y_v_eno.
CONCATENATE text-002 y_v_sno '/' y_v_eno INTO y_v_msg SEPARATED BY
space.
CONDENSE y_v_msg.
WRITE / y_v_msg .
SKIP 1.
ENDFORM. "Y_FD_TOP_OF_LIST -
Adding Form Fields to Structure
I am working with Adobe Acrobat Pro v9 with a PowerPoint document that I converted to a PDF. I'm working on making it accessible. It is a simple course certificate with one form field, a text box that the user simply types their name in. When I run Accessibility: Full Check I get one error message relating to adding form fields to structure.
It says I need to choose Adanced Accessibility: Add Form Fields to PDF Tags. When I do that and run the Full Check again, I continue to get the same message.
Am I missing a step? Or is there anything else I need to do?
Thanks!Just some nattering here, but -
After any edits/changes save the PDF before running Full Checker again.
Open the Tags panel, expand the structure tree, from the Options menu turn on Highlight Content.
Walk down the tree. Look for <Form>.
From the Options menu (for the Tags panel) use "Find".
Look for Unmarked Annotations.
Note that "Run Form Field Recognition" will add <Form> to the structure tree.
However, the OBJR beneath it is "generic" and not "your" form field.
For this situation you'd have to add yours (use Find - the dialog has a button to permit tagging an item).
Once the form field annotation is "in" the structure tree you'll want to ensure it is positioned appropriately; in context of the page's logical hierarchy.
Be well... -
When adding listview items, the listview1 items flash and only the first listview column loads (there are 5 columns in all)?
Background...
I was having cross-threading issues on 3 form components which I was able to resolve (see
code here). Now I think the soluiton which involves creating a delegate and performing an "InvokeRequired" check (see
what I used), I'm having an issue passing 5 values for each column. Below is the code involved calling this invoking check for each and their methods.
Before having the cross-thread issue the "listview1.Items.Add(values.text) add the comma separated string values to the appropriate columns, but that doesn't happen through the cross-thread fix required.
The "Loading()" method is handled through and async/await method causing the initial cross-thread issue.
private void Loading()
int t = 1;
foreach (string line in scripts)
string[] listValues = line.Split(',');
ListViewItem values = new ListViewItem(listValues);
if (t == 1)
AddColumn("Script Name", 200); // Creates column headings
AddColumn("Date and Time", 150);
AddColumn("SID", 75);
AddColumn("Environment", 75);
AddColumn("Client", 75);
t++;
else
if ((values.Text != "") && (values.Text != "Script Name"))
//listView1.Items.Add(values);
AddItem(values.Text);
if (!dictScript.Contains(values.Text))
dictScript.Add(values.Text);
//cbxScriptList.Items.Add(values.Text);
AddScript(values.Text);
private void AddItem(object o)
if (this.listView1.InvokeRequired)
AddItemCallback d = new AddItemCallback(AddItem);
this.Invoke(d, new object[] { o });
else
{ // code that adds item to listView (in this case $o)
listView1.Items.Add(o.ToString());
private void AddScript(object o)
if (this.listView1.InvokeRequired)
AddCBXCallback d = new AddCBXCallback(AddScript);
this.Invoke(d, new object[] { o });
else
{ // code that adds item to listView (in this case $o)
cbxScriptList.Items.Add(o.ToString());
private void AddColumn(object o1, object o2)
if (this.listView1.InvokeRequired)
AddColCallback d = new AddColCallback(AddColumn);
this.Invoke(d, new object[] { o1, o2 });
else
{ // code that adds item to listView (in this case $o)
listView1.Columns.Add(o1.ToString(), (int)o2); // Creates column headings
SVOk, I still have the flickering issue, I could use some guidance on that. And I should note that before I had the code-threading issue, I never had any flickering, it all appeared simultaneously.
However, I was able to populate all columns (5 in all). I had two corrections to make.
1) My method should not have been passing the parameter as text but as the object ListViewItem:
// Not This...
AddItem(values.text)
// This is Correct...
AddItem(values)
2) Then I needed to cast my object as a ListViewItem in my method call:
private void AddItem(object o)
if (this.listView.InvokeRequired)
AddItemCallback d = new AddItemCallback(AddItem);
this.Invoke(d, new object[] { (ListViewItem)o });
else { // code that adds item to listView (in this case $o)
listView1.Items.Add((ListViewItem)o);
SV -
Add null rows in WDDOINIT for fetching data from dynamically added rows..
Hi,,
I have to fetch data from a dynamically added rows of a table.
I have followed / gone through many forums but they ddnot mention how to add null rows in the initialization method..
I am using WD Abap..
Can anyone help how to bind null rows in WDDOINIT method..?
Thanks,
SuryaDiscussed @ SDN lot of time before. Have a look at any of below threads:-
Dynamic table in interactive form...
Make dynamic tables in Adobe Interactive forms
Adding Rows dynamically upon clicking the button
How to get values to WebDynpro ABAP from dynamic table?
Chintan
Maybe you are looking for
-
SPECS: Vista Ultimate SP1, Trend Micro PC-cillin firewall, HP C309a printer I can send & receive faxes, I can print from my computer and I can make copies. Everyime I try to scan by pushing the scan button on the printer I get the message to try scan
-
How to create a pdf for the URL attached to an invoice and send it as an attachment in a mail
HI, I have requirement where i need to get the URL attached to an invoice, create the pdf and send as an attachement in a mail. The URL attached to an invoice can be seen by following the path : VF03-> Billing document->system->Services for object ->
-
Passing an Array to an Applet using PARAM
Is it possibly to pass values as an arrary to an applet from the HTML page. Like so: <param name="images" value="'/archives/4/6-26-1/10/04-01-06-26-10-00-07-00.jpg', '/archives/4/6-26-1/10/04-01-06-26-10-00-17-00.jpg', '/archives/4/6-26-1/10/04-01-06
-
Very disappointed with latest update.
Ever since latest update ipod crashes whenever I try to use major apps. I am using an Ipod touch 4g and am planning on purchasing the newer 5g. But, if I can expect the same problems I won't bother. PROBLEMS: Crashing of Itunes, App store, Maps, Yout
-
When syncing music why will it not sync in the order I want the playlist instead of this random way it puts it on the ipod?