Dynamically pick the table names in data flow task SSIS

Hi All,
I want to create a SSIS package which loads the data to a table on the other server every day. I have around 250 tables to load everyday and source and destination table names are available in a metadata table, table names have to read from the metadata
table and data should be loaded. Is there a way that we can configure the source and destination table names dynamically in Data flow task?
I am newbie to SSIS can any help with the solution for this problem.

You can do that, not a big deal. The underlying problem is say suppose you constructed a ETL based on some x source and y destination and have put x(3 columns) as source and y destination(3 columns).. As you said if we have choice of dynamically pick the
table names.. ETL might fail when you face below situation
source x(3 columns) destination y (4 columns) and there will be no mapping as it is dynamic. Sometimes mapping also fails even if the source and destination have same number of columns. If you still want to do... follow below steps:
Create two variables:
1.variable1 , datatype string
2.variable datatype string
take one execute sql task, pick your source table names dynamically as you desired from metadata table \
"SELECT sourcetblname as Res FROM @metadata WHERE ID=1" in sql statement and then go to name the result name as Res (I meant same as table alias) and map it to variablename1
And in variable2 go to expression and write "Select * from "+@[User::variable].. and this will be your constructed dynamic command for oledb destination.
And connect that execute sql task to (Data flow task)oledb source and choose data access mode as sql command with variable,and choose variable2. below is the diagram.
- please mark correct answers

Similar Messages

How to dynamically change the table name inside a view

Hi All,
create table t_auto_feeds
id number,
table_name vachar2(100));
insert into t_auto_feeds values(1,'T_FEED_POSITIONS');
insert into t_auto_feeds values(2,'T_KAP_MTM');
assume there are 100 records on id=1 in T_FEED_POSITIONS and 100 records of id=2 in T_KAP_MTM (id 1 is present only in t_feed_positions & id 2 is present only in t_kap_mtm)
i need to create a view such that it needs to give the count of records based on the id
create or replace view aa_view as
select count(*), id from t_feed_position group by id
union
select count(*), id from t_kap_mtm group by id;
I am getting a proper result when i query the view like select * from aa_view where id=1 but will the other union query seems to be a overhead?. I am having 10 such tables configured for different id in t_auto_feeds.so do i need to put 10 unions or is there a better way to handle this stuff.
I know i can use a PLSQL block and dynamically build view structure, the problem is the view itself is configured in a table , so i cant write a proc for this.. can this aa_view be modified such that it queries only the table(using the t_auto_feeds ) which matches the id rather than the entire list.
Kindly help me in this regard and let me know in case u need any further information from my side.

>
so do i need to put 10 unions or is there a better way to handle this stuff.
>
Yes - you need 10 unions
Yes - there is a better way so that only one of the 10 queries does anything.
You can use SYS_CONTEXT to control the query selection.
Here is an example of using SYS_CONTEXT. Try this code in the SCOTT schema.
create or replace context VIEW_CTX using SET_VIEW_FLAG;
create or replace procedure SET_VIEW_FLAG ( p_table_name in varchar2 default 'EMP')
as
begin
dbms_session.set_context( 'VIEW_CTX', 'TABLE_NAME', upper(p_table_name));
end;
select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
select * from emp2 where 'EMP2' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
exec set_view_flag( p_table_name => 'EMP' );
exec set_view_flag( p_table_name => 'EMP1' );
exec set_view_flag( p_table_name => 'EMP2');
SELECT sys_context( 'VIEW_CTX', 'TABLE_NAME' ) FROM DUAL
CREATE VIEW THREE_TABLE_EMP_VIEW AS
select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
union all
select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
union all
select * from emp2 where 'EMP2' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
SELECT * FROM THREE_TABLE_EMP_VIEWNote that you set the context for the table you want. This doesn't have to be a table name it could just be flag value
-- use the emp table
exec set_view_flag( p_table_name => 'EMP' );
-- ue the emp1 table
exec set_view_flag( p_table_name => 'EMP1' );
-- use the emp2 table
exec set_view_flag( p_table_name => 'EMP2');

Dynamically fetching the table name

Hi All,
I am trying to fetch table name dynamically using some variables.
Example: Table_name : ABC_#PROJ.JOB_ID_#PROJ.PROJECT_ID.
I am passing the JOB_ID and PROJECT_ID while running the package.
Is there any restriction on the lengths of variables? Because it is not working when i change the name of variable JOB_ID to JOB_ID_QWERTYTJTNGIGRN.
Thanks,
Ashok

Thanks for the Response.
Bhabani,
Yes the variable is not substituting the value. But i am not following why it is happening, i tried to find the lenght of the variable at which this behaviour starts but it is not consistent.One varibale didnot work when i increased the lenght to 19 and the other didnot work at 18 itself.
Exact name of the variable:
PROCESS_GRP_NO_PREVIOUS. (Change the name to PROCESS_GRP_N and it works.)
DecaXD,
No i dont see in blue, its not a key work.
Thanks,
Ashok

How to dynamically change the table name for a update statement

Hi All,
I need to update a coulumn xyz in either of tables abc and efg based on some condition.
I wrote a cursor which has union of two queries(one querying abc and other efg)
Now based on some inparameter only one will be executed at a time.
And based on some condition a coulumn xyz needs to be updated which is in either of the table.
As the update condition is same
Update abc/efg set xyz=data where condition
I am looking to initialize a variable like v_tname based on some condition and update like
update v_tname .........
(Exactly that may not be like so, But looking a technique like this)
Please help

If there is only two tables you'll need to update then you are better off using static SQL and implementing something like this instead:
DECLARE
        update_condition        BOOLEAN;
BEGIN
        -- initialize update_condition
        update_condition := <some_boolean_check>;
        IF update_condition
        THEN
                UPDATE abc
                SET    xyz = some_val
                WHERE some_col = some_other_val;
        ELSE
                UPDATE fgh
                SET    xyz = some_val
                WHERE some_col = some_other_val;
        END IF;
END;
/Hope this helps!

There is anyway to find the tables name where data is getting inserted currently.

Hi All,
I need T-Sql Query to find list of tables in which data is getting loaded currently.
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi,
What About This Query:
SELECT B.TEXT,A.SESSION_ID,A.STATUS,A.COMMAND,A.CPU_TIME,A.TOTAL_ELAPSED_TIME,A.*,B.*
FROM SYS.DM_EXEC_REQUESTS A
CROSS APPLY SYS.DM_EXEC_SQL_TEXT (SQL_HANDLE) B
WHERE TEXT NOT LIKE '%SELECT B.TEXT,A.SESSION_ID,A.STATUS,A.COMMAND,A.CPU_TIME,A.TOTAL_ELAPSED_TIME,A.*,B.*%'
--AND TEXT LIKE '%'
ORDER BY START_TIME DESC
Thanks Shiven:) If Answer is Helpful, Please Vote
The query would return the currently executing query irrespective of insert. But, you are looking for the logging of table. Is my understanding wrong?
If you are looking for what is running on the server, then you can use the above script. The below is the one am using to get those info:
SELECT r.session_id ,
(Select Top 1 CON.client_net_address From sys.dm_exec_connections AS CON
where CON.session_id = r.session_id) Client_Address,
OBJECT_NAME(qt.objectid, qt.dbid),
r.[status] ,
r.wait_type ,
r.scheduler_id ,
SUBSTRING(qt.[text], r.statement_start_offset / 2,
( CASE WHEN r.statement_end_offset = -1
THEN LEN(CONVERT(NVARCHAR(MAX), qt.[text])) * 2
ELSE r.statement_end_offset
END - r.statement_start_offset ) / 2) AS [statement_executing] ,
DB_NAME(qt.[dbid]) AS [DatabaseName] ,
Object_NAME(qt.objectid) AS [ObjectName] ,
r.cpu_time ,
r.total_elapsed_time ,
r.reads ,
r.writes ,
r.logical_reads ,
r.plan_handle
FROM sys.dm_exec_requests AS r
CROSS APPLY sys.dm_exec_sql_text(sql_handle) AS qt
WHERE r.session_id > 50 and r.session_id <> @@SPID

How to use one dynamic connection managers for multiple parallel data flow tasks

hi there:
I have 6 databases residing on the same server. What I want to do is call a store procedure with identical name on each database dbo schema and transport results to a centralized place. The key is to have those SPs run in parallel instead
of in sequence as each SP may take around 10 mins to finish.
The simplest way is to create 6 OLE DB connection managers and create 6 DFT tasks. However, I do not want to maintain 6 OLE DB connection managers as there is a chance to have more connection managers.
What I did so far is to create a OLD DB connection manager and use expression to set up connectionString properties so that it will get populated by variables at run time. It is fine when running all SPs in a Foreach Loop Container. However, it takes
around 60 mins to finish.
When I try to run it in parallel ( basically created 6 DFTs but use only one Dynamic Connection Manager), the connection string gets confused therefore all DFT tasks failed.
Does anyone here have some experience on this topic?
Thanks
hui
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Yes, basically, on the connectionString property of ONE OLEDB, you are using an expression to supply value and this expression is pointing to a variable.
In this case , you can update this variable from a table which contains many connection strings. It's good if you want to execute Store procedures in a sequential order. When in parallel mode, this will cause issues as connectionString gets overwritten.
I am thinking about using script task to exec sp.
The whole idea is that I do not want to maintain a large number of Connection Managers.
Hope it helps
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --
So you are not able to run parallel executions using same conn mgmr, even with dynamic connectionstring, is that correct? Yes, script task will be a way to go if you wish to execute it in parallel, you may connect to SS and query the proper conn string with
SELECT/WHERE clause in each script > pass it to a script variable > use that script variable and execute the proc. This will require only two things to change in each script, the WHERE condition to get the conn string and the proc name (you may even
get the proc names the same way you get conn string) and everything else will be same. Let us know how that goes.
Hope no two or more procs doing insert/update/delete on the same tables.

Dynamically changing the flatfile name..

Hi friends,
I 'm Getting data from 30 Flat files...all are with same structure but different data.. .. all these files are now in Application server...
now i want to upload data into with a single DataSource and to ODS with process chains..
so, how can i dynamically change the file name in Data Source level.. i saw previous threads.. in that.. through Routines.. we can solve this problem.. but I dont know ABAP code... so, can any one plz give me the exact code.. what i have to write...exact coding..
<b>
       I already post this question in forums.... but evry one gave different options.. some one gave the function module..
BAPI_IPACK_CHANGE    and BAPI_IPACK_START.
and some one gave other function module.. like .. EPS_GET_DIRECTORY_LISTING
i tryd for All these options.. but i'm not getting the exact solution... even i'm unable to pass the parameters also.. beacuse.. in that function what parameters can i pass....</b>
can u plz suggest me the solution..
Thanks
Babu

Hi Friends,
for the above requirement i had write the bellow coding in the routine.. it is working.. but the problem is.. it was loading only the last file..(30 th file data only..)
data : z1(50) type c,
         z2 type c,
         z3(50) type c,
         z4(50) type c.
         Z2 = 1.
   Do 5 times.
          z1 = 'C:\Documents and Settings\e10035\Desktop\'.
          z3 = '.csv'.
          concatenate z1 z2 z3 into z4.
          p_filename = z4.
          z2 = z2 + 1.
    Enddo.
SO, CAN YOU PLZ SUGGEST ME.. when ever the file name was changing in the loop.. that automatically should load into the PSA ..
plz... plz.... help regarding this..
Bbau

Table Name for Date Profile & SLA

Hi,
What is the table name for Data Profile / Date Type etc and also for SLA tables?
Rgds,
VR.

Hi
here are the table for date profile, service profile and response profiles.
1. Date profile:- CRMC_DATES_PRF
2. Service profile:- crmd_serwi
3. Response profile :-crmd_escal
Regards
Naresh

Error on Data Flow Task MSSQL 2012 Clustered "Description: The version of Lookup is not compatible with this version of the DataFlow. "

We have an SSIS package that runs on clustered MSSQL 2012 Enterprise Nodes that is failing. We use a job to executer the package.
Environmental information:
Product - Microsoft SQL Server Enterprise: Core-based Licensing (64-bit)
Operating System - Microsoft Windows NT 6.1 (7601)
Patform - NT x64
Version - MSSQL Version 11.0.3349.0
Package is set to 32 -bit. All permissions verified. Runs in lower environments, same MSSQL version. All environments are clustered. In the failing environment, all nodes are at the same service pack. I have not verified if all
nodes in the failing environment have SSIS installed. Data access is installed. We have other simpler packages that run in this environment, just not this one. Time to ask the community for help!
Error:
Source: Data Flow Task - Data Flow Task (SSIS.Pipeline) Description: The version of Lookup is not compatible with this version of the DataFlow. End Error Error: Code: 0xC0048020
Description: Component "Conditional Split, clsid {7F88F654-4E20-4D14-84F4-AF9C925D3087}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly. End Error
Description: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Conditional Split;Microsoft Corporation; Microsoft SQL Server; (C) Microsoft Corporation; All Rights
Reserved; http://www.microsoft.com/sql/support;0". End Error
(Left out shop specific information. This is the first error in the errors returns by the job history for this package. )
Thanks in advance.

Hi DeveloperMax,
According to your description, the error occurs when you execute the package with Agent job on clustered MSSQL 2012 Enterprise Nodes.
As per my understanding, I think this issue can be caused by you use SQL Server Agent to schedule a SQL Server Integration Services package in a 64-bit environment. And the SSIS package is referencing some 32-Bit DLL or 32-Bit drivers which are available
only in 32-bit versions, so the job failed.
To fix this issue, we should use the 32-bit version of the DTExec.exe utility to schedule the 64-bit SQL Server Agent to run a package. To run a package in 32-bit mode from a 64-bit version of SQL Server Agent, we can go to the Job Step dialog box, then
select “32 bit runtime” in the Advanced tab.
Besides, we should make sure that SQL Server Integration Services is installed on the failing environment.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Code: 0xC0208452 Source: Data Flow Task ADO NET Destination [86] Description: ADO NET Destination has failed to acquire the connection {}. The connection may have been corrupted.

Hi There!
I have created one package (1) to import data from Flatfile(csv), (2)Clean It then (3)send clean rows to SQL Database.
This package was working fine before. Since I have decided to deploy this package to automate this process, I have no clue what went wrong but this doesn't run anymore. Flatfile and Database are on same windows box. We are running SQL 2008.I
have attached some screenshot to make this conversation more concise.
Your time and efforts will be appreciated!
Thanks,
DAP

Hi Niraj!
I recreated connection and I was able to remove that RED DOT next to those connections.
Still package doesnt run well :(
I have only one server. I use same server through out the process. I ran that process as job through SSMS and attached is output file(if this explains more)...
Microsoft (R) SQL Server Execute Package Utility
Version 10.0.4000.0 for 64-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 11:34:38 AM
Error: 2014-07-18 11:34:39.33
Code: 0xC0208452
Source: Data Flow Task ADO NET Destination [86]
Description: ADO NET Destination has failed to acquire the connection {2430******}. The connection may have been corrupted.
End Error
Error: 2014-07-18 11:34:39.33
Code: 0xC0047017
Source: Data Flow Task SSIS.Pipeline
Description: component "ADO NET Destination" (86) failed validation and returned error code 0xC0208452.
End Error
Error: 2014-07-18 11:34:39.33
Code: 0xC004700C
Source: Data Flow Task SSIS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2014-07-18 11:34:39.33
Code: 0xC0024107
Source: Data Flow Task
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 11:34:38 AM
Finished: 11:34:39 AM
Elapsed: 0.531 seconds
Thanks for your time and efforts!
DAP

Error: 0xC020902A at Data Flow Task, XML Source [24515]: The "component "XML Source" (24515)" failed because truncation occurred, and the truncation row disposition on "output column "MsgLev1" (26196)" specifies failure on truncation. A truncation error o

When I was Importing data from XML to SqlServer using SSIS , I am getting this error. The import is working if i use small file and not working if I use large XMl file. Can any one of you guys help me out with the issue?
Error: 0xC020902A at Data Flow Task, XML Source [24515]: The "component "XML Source" (24515)" failed because truncation occurred, and the truncation row disposition on "output column "MsgLev1" (26196)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC02092AF at Data Flow Task, XML Source [24515]: The component "XML Source" (24515) was unable to process the XML data. Pipeline component has returned HRESULT error code 0xC020902A from a method call.
Error: 0xC0047038 at Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "XML Source" (24515) returned error code 0xC02092AF. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread4" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread2" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread3" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread4" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.

The reason is in the first line of the error. It doesn't have anything to do with the size of your XML file - it has to do with the contents of the "MsgLev1" column. You (or the XSD) has indicated that the values in this column not exceed a certain size - but one of the values in the file that's failing is larger than that.
In order to fix the problem, you're going to need to increase the allocated space for that column. In order to do that, you're going to need to find out what the required size of that data is - either from someone who ought to know, or by direct examination of the file. If you want to know which entity has this overly large data element in it, you need to configure the error handling of the XML Source to "redirect truncation errors". Then you can hook up the XML Source's error output to another destination where you can see which rows are problematic.
Talk to me on

"Syntax error or access violation" on Data Flow Task OLE DB Data Source

I am implementing expression parameter for a SQL Server connection string (like this: http://danajaatcse.wordpress.com/2010/05/20/using-an-xml-configuration-file-and-expressions-in-an-ssis-package/) and it works fine except when it reaches data flow
task - OLE DB Source task. In this task, I execute a stored procedure like this:
exec SelectFromTableA ?,?,?
The error message is this:
0xC0202009 at Data Flow Task, OLE DB Source [2]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "Syntax error or access violation".
Error: 0xC004706B at Data Flow Task, SSIS.Pipeline: "OLE DB Source" failed validation and returned validation status "VS_ISBROKEN"
When I change the SQL command above with reading from table directly it works fine. I should also add that before changing connection string of the SQL data source to use expression, the SSIS package was working fine and I know that the connection string
is fine because other tasks in the package works fine!
Any idea why?

Hi AL.M,
As per my understanding, I think this problem is due to the mismatching between the source and the destination tables. We can reconfigured every of components of the package to check the table schemas and configuration settings, close the BIDS/SSDT and then
open and try to see if there are errors.
Besides, to trouble shoot this issue, we can use the variable window to see the variable's value. For more details, please refer to the following blog:
http://consultingblogs.emc.com/jamiethomson/archive/2005/12/05/2462.aspx
The following blog about “SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred: Reasons and troubleshooting” is for your reference:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2009/11/10/ssis-error-code-dts-e-oledberror-an-ole-db-error-has-occurred-reasons-and-troubleshooting.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Data Flow Task problems after installing SQL Server 2014 SSIS

I can't create any Data Flow Task. Once I create (tested and working) Connection (it doesn't
matter if it is Excel, Flat File or other) and try to use it with a Source Assistant, I get the following messages:
===================================
The component could not be added to the Data Flow task.
Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
===================================
Error at Data Flow Task [SSIS.Pipeline]: Component ", clsid {C4D48377-EFD6-4C95-9A0B-049219453431}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly.
Error at Data Flow Task [ [1]]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
===================================
Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError, Boolean select)
===================================
The component could not be added to the Data Flow task.
Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
The component could not be added to the Data Flow task.
Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
===================================
Error at Data Flow Task [SSIS.Pipeline]: Component ", clsid {C4D48377-EFD6-4C95-9A0B-049219453431}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly.
Error at Data Flow Task [ [1]]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
Error at Data Flow Task [SSIS.Pipeline]: Component ", clsid {C4D48377-EFD6-4C95-9A0B-049219453431}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly.
Error at Data Flow Task [ [1]]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
===================================
Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError, Boolean select)
Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError, Boolean select)

See examples here:
http://www.sqlusa.com/bestpractices/ssis-wizard/
What is your data source?
What is your data destination?
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Row-by-Row processing in data flow task

Hi to all
I want ask to you, how to process one row at time in transformation components in data flow task?
For Example, we have the following components in data flow task :
Derived Column ----> Ole DB Command_1 ----> Ole DB Command_2
I want that the Ole DB Command_1 receive the first row and execute sql command (INSERT command) then the Ole DB command_2 receive the same row and execute the sql command (INSERT command).
After the Ole DB Command_1 receive the second row and execute sql command (INSERT command) then the Ole DB command_2 receive the same row and execute the sql command (INSERT command).
After the Ole DB Command_1 receive the third row and execute sql command (INSERT command) then the Ole DB command_2 receive the same row and execute the sql command (INSERT command).
.... And so on... until last row.
Instead, now the Ole DB Command_1 receive n rows and execute n INSERT ... then the Ole DB Command_2 receive the same n rows and execute n INSERT.
How to realize row-by-row processing in Ole DB Command_1 and Ole DB Command_2?
thanks in advance.

Why cant the INSERTS be wrapped inside a procedure and then procedure be called within OLEDB Command so that inserts gets executed in required sequence for each records in the pipeline.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Building a data flow task, within a foreach loop for dynamic table name, but ole db source not allowing variable

In my control flow, I set up a variable for the table name, enumerated by SMO, following the instructions from the link here:
http://www.bidn.com/blogs/mikedavis/ssis/156/using-a-for-each-loop-on-tables-ssis
Now, I put a data flow task inside the foreach. I selected the OLE DB connection manger for my database, set the Data access mode to "Table name or view name variable", and selected my variable name from the drop down. So far so good. When I click on OK,
it gives me an error 0x80040E37, basically saying it can't open the rowset for "my variable", Check that the object exists in the database.
So, I assume I won't be able to do this "that' easily, and I will need to build a "SQL command from variable" or some such thing. Any advice on how to build this Source editor to dynamically name my columns from the variable?
Thanks in advance!
mpleaf

Hi mpleaf,
Please try to set "ValidateExternalData" to False in your OLE DB Source Properties and "DelayValidation" property to TRUE, please refer to similar threads:
http://social.msdn.microsoft.com/Forums/en-US/sqlintegrationservices/thread/620557d9-41bc-4a40-86d5-0a8d2f910d8c/
http://social.msdn.microsoft.com/Forums/en-US/sqlintegrationservices/thread/456f2201-447c-41b3-bf27-b3ba47e6b737
Thanks,
Eileen
Eileen Zhao
TechNet Community Support

Dynamically pick the table names in data flow task SSIS

Similar Messages

Maybe you are looking for