Dynamically fetching the table name

Hi All,
I am trying to fetch table name dynamically using some variables.
Example: Table_name : ABC_#PROJ.JOB_ID_#PROJ.PROJECT_ID.
I am passing the JOB_ID and PROJECT_ID while running the package.
Is there any restriction on the lengths of variables? Because it is not working when i change the name of variable JOB_ID to JOB_ID_QWERTYTJTNGIGRN.
Thanks,
Ashok

Thanks for the Response.
Bhabani,
Yes the variable is not substituting the value. But i am not following why it is happening, i tried to find the lenght of the variable at which this behaviour starts but it is not consistent.One varibale didnot work when i increased the lenght to 19 and the other didnot work at 18 itself.
Exact name of the variable:
PROCESS_GRP_NO_PREVIOUS. (Change the name to PROCESS_GRP_N and it works.)
DecaXD,
No i dont see in blue, its not a key work.
Thanks,
Ashok

Similar Messages

  • Dynamically pick the table names in data flow task SSIS

    Hi All,
    I want to create a SSIS package which loads the data to a table on the other server every day. I have around 250 tables to load everyday and source and destination table names are available in a metadata table, table names have to read from the metadata
    table and data should be loaded. Is there a way that we can configure the source and destination table names dynamically in Data flow task?
    I am newbie to SSIS can any help with the solution for this problem.

    You can do that, not a big deal. The underlying problem is say suppose you constructed a ETL based on some x source and y destination and have put x(3 columns) as source and y destination(3 columns).. As you said if we have choice of dynamically pick the
    table names.. ETL might fail when you face below situation
    source x(3 columns)   destination y (4 columns) and there will be no mapping as it is dynamic. Sometimes mapping also fails even if the source and destination have same number of columns. If you still want to do... follow below steps:
    Create two variables:
    1.variable1 , datatype string
    2.variable datatype string  
    take one execute sql task, pick your source table names dynamically as you desired from metadata table \
    "SELECT sourcetblname as Res FROM @metadata WHERE ID=1" in sql statement and then go to name the result name as Res (I meant same as table alias) and map it to variablename1
    And in variable2 go to expression and write "Select * from "+@[User::variable].. and this will be your constructed dynamic command for oledb destination.
    And connect that execute sql task to (Data flow task)oledb source and choose data access mode as sql command with variable,and choose variable2. below is the diagram.
    - please mark correct answers

  • How to dynamically change the table name inside a view

    Hi All,
    create table t_auto_feeds
    id number,
    table_name vachar2(100));
    insert into t_auto_feeds values(1,'T_FEED_POSITIONS');
    insert into t_auto_feeds values(2,'T_KAP_MTM');
    assume there are 100 records on id=1 in T_FEED_POSITIONS and 100 records of id=2 in T_KAP_MTM (id 1 is present only in t_feed_positions & id 2 is present only in t_kap_mtm)
    i need to create a view such that it needs to give the count of records based on the id
    create or replace view aa_view as
    select count(*), id from t_feed_position group by id
    union
    select count(*), id from t_kap_mtm group by id;
    I am getting a proper result when i query the view like select * from aa_view where id=1 but will the other union query seems to be a overhead?. I am having 10 such tables configured for different id in t_auto_feeds.so do i need to put 10 unions or is there a better way to handle this stuff.
    I know i can use a PLSQL block and dynamically build view structure, the problem is the view itself is configured in a table , so i cant write a proc for this.. can this aa_view be modified such that it queries only the table(using the t_auto_feeds ) which matches the id rather than the entire list.
    Kindly help me in this regard and let me know in case u need any further information from my side.

    >
    so do i need to put 10 unions or is there a better way to handle this stuff.
    >
    Yes - you need 10 unions
    Yes - there is a better way so that only one of the 10 queries does anything.
    You can use SYS_CONTEXT to control the query selection.
    Here is an example of using SYS_CONTEXT. Try this code in the SCOTT schema.
    create or replace context VIEW_CTX using SET_VIEW_FLAG;
    create or replace procedure SET_VIEW_FLAG ( p_table_name in varchar2 default 'EMP')
      as
      begin
          dbms_session.set_context( 'VIEW_CTX', 'TABLE_NAME', upper(p_table_name));
      end;
    select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
    select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
    select * from emp2 where 'EMP2' =  sys_context( 'VIEW_CTX', 'TABLE_NAME' )
    exec set_view_flag( p_table_name => 'EMP' );
    exec set_view_flag( p_table_name => 'EMP1' );
    exec set_view_flag( p_table_name => 'EMP2');
    SELECT sys_context( 'VIEW_CTX', 'TABLE_NAME' ) FROM DUAL
    CREATE VIEW THREE_TABLE_EMP_VIEW AS
    select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
    union all
    select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
    union all
    select * from emp2 where 'EMP2' =  sys_context( 'VIEW_CTX', 'TABLE_NAME' )
    SELECT * FROM THREE_TABLE_EMP_VIEWNote that you set the context for the table you want. This doesn't have to be a table name it could just be flag value
    -- use the emp table
    exec set_view_flag( p_table_name => 'EMP' );
    -- ue the emp1 table
    exec set_view_flag( p_table_name => 'EMP1' );
    -- use the emp2 table
    exec set_view_flag( p_table_name => 'EMP2');

  • How to dynamically change the table name for a update statement

    Hi All,
    I need to update a coulumn xyz in either of tables abc and efg based on some condition.
    I wrote a cursor which has union of two queries(one querying abc and other efg)
    Now based on some inparameter only one will be executed at a time.
    And based on some condition a coulumn xyz needs to be updated which is in either of the table.
    As the update condition is same
    Update abc/efg set xyz=data where condition
    I am looking to initialize a variable like v_tname based on some condition and update like
    update v_tname .........
    (Exactly that may not be like so, But looking a technique like this)
    Please help

    If there is only two tables you'll need to update then you are better off using static SQL and implementing something like this instead:
    DECLARE
            update_condition        BOOLEAN;
    BEGIN
            -- initialize update_condition
            update_condition := <some_boolean_check>;
            IF update_condition
            THEN
                    UPDATE abc
                    SET    xyz = some_val
                    WHERE  some_col = some_other_val;
            ELSE
                    UPDATE fgh
                    SET    xyz = some_val
                    WHERE  some_col = some_other_val;   
            END IF;
    END;
    /Hope this helps!

  • Invalid table name when pass in the table name as variable in dynamic sql

    Hi,
    I need to create a stored procedure which will return a list of data to my java application like the following.
    first, select the table name from the first table.
    For example : SELECT T_NAME FROM MDR_SMSTABLES
    second, select the data from the table which returned by first select statement
    For example : SELECT * FROM T_NAME.
    I use dynamic sql with cursor to select the data. But it returns "java.sql.SQLException: ORA-00903: invalid table name"
    I fetch the table name to varchar2. I think this might the cause it returns me the this error. But i don't know what type should i put for the table name other then varchar2.
    val2 VARCHAR2(200);
    OPEN cv FOR
    SELECT T_NAME FROM MDR_SMSTABLES WHERE T_DATE=d_dt_sent;
    FETCH cv INTO val2;
    WHILE cv%FOUND
    LOOP
    OPEN refcur FOR
    'SELECT * FROM :t WHERE MID = :m' USING val2, msg_id;
    EXIT WHEN refcur IS NOT NULL;
    FETCH cv INTO val2;
    END LOOP;
    As my stored procedure is quite long, so i just paste some of the code here. Hope the information is enough. Can anyone please help?
    Thanks

    DECLARE
    val2 VARCHAR2 (200);
    cv sys_refcursor;
    refcur sys_refcursor;
    BEGIN
    OPEN cv FOR
    SELECT table_name
    FROM user_tables
    WHERE table_name IN ('EMP', 'DEPT');
    FETCH cv INTO val2;
    WHILE cv%FOUND
    LOOP
    OPEN refcur FOR 'SELECT * FROM '||val2;
    EXIT WHEN refcur IS NOT NULL;
    FETCH cv INTO val2;
    END LOOP;
    END;

  • How to pass the table name dynamically in xml parsing

    Hi All,
    I have created one procedure for parsing xml file which is working perfectly.
    FORALL i IN t_tab.first .. t_tab.last
             INSERT INTO Test_AP VALUES t_tab(i);Now I want to put the table name dynamically+. For that I have added one query and modify above code as follow:-
    I have already declare dml_str varchar2(800) in declaration part.
    Query is as follows:-
    select table_name into tab_name from VERSION_DETAILS where SUBVERSION_NO=abc;  -- here abc is variable name which contains values.
    FORALL i IN t_tab.first .. t_tab.last
              dml_str := 'INSERT INTO ' || tab_name || ' values :vals';
              EXECUTE IMMEDIATE dml_str USING t_tab(i);But it's not working. How I will resolve this or through which way I achieved the intended results. Anyone can guide me on this matter.
    Thanks in advance for your help...

    Hi,
    But it's not working.Don't you think it would help to give the error message?
    Put the assignment before FORALL.
    FORALL only accepts one subsequent DML statement (static or dynamic SQL) :
    dml_str := 'INSERT INTO ' || tab_name || ' values :vals';
    FORALL i IN t_tab.first .. t_tab.last          
    EXECUTE IMMEDIATE dml_str USING t_tab(i);

  • Dynamic SQL : passing table name as parameter

    Hi
    I have a SQL query (a store procedure )  that i want to convert to PLSQL
    This is a part of my SQL query that i am trying to to find a solution for it, because i cant convert it to oracle :
    DECLARE lookupTableRow CURSOR FOR
      SELECT TableName FROM SYS_LookUpTable
      OPEN lookupTableRow
      FETCH NEXT FROM lookupTableRow INTO @tableName
      WHILE @@FETCH_STATUS=0
      BEGIN
      SET @sql='SELECT * FROM '+@tableName
    EXECUTE sp_executesql @sql
      IF @counter=0
      BEGIN
      INSERT INTO T_TABLE_MAPPING VALUES('P_MAIN_METADATA', 'Table', @tableName)
      END
      ELSE
      BEGIN
      INSERT INTO T_TABLE_MAPPING VALUES('P_MAIN_METADATA', 'Table'+CONVERT(NVARCHAR(10),@counter), @tableName)
      END
      SET @counter=@counter+1
      FETCH NEXT FROM lookupTableRow INTO @tableName
      END
      CLOSE lookupTableRow
      DEALLOCATE lookupTableRow
    As i understand i can't use ORACLE dynamic sql (execute immediate) when the table name is a parameter
    Furthermore when i execute this dynamic query in my SQL store procedure each SELECT statement return me as a result the relevant table rows , those result are different in each loop .
    So i cant do this too with ORACLE dynamic sql .
    Please advice for any solution
    * how can i use dynamic sql with table name as parameter ?
    * how can i use a "dynamic" cursor, in order to be able to display the dynamic results ?
    Thanks for the advice

    Hi,
    b003cf5e-e55d-4ff1-bdd2-f088a662d9f7 wrote:
    Hi
    I have a SQL query (a store procedure )  that i want to convert to PLSQL
    This is a part of my SQL query that i am trying to to find a solution for it, because i cant convert it to oracle :
    DECLARE lookupTableRow CURSOR FOR
      SELECT TableName FROM SYS_LookUpTable
      OPEN lookupTableRow
      FETCH NEXT FROM lookupTableRow INTO @tableName
      WHILE @@FETCH_STATUS=0
      BEGIN
      SET @sql='SELECT * FROM '+@tableName
    EXECUTE sp_executesql @sql
      IF @counter=0
      BEGIN
      INSERT INTO T_TABLE_MAPPING VALUES('P_MAIN_METADATA', 'Table', @tableName)
      END
      ELSE
      BEGIN
      INSERT INTO T_TABLE_MAPPING VALUES('P_MAIN_METADATA', 'Table'+CONVERT(NVARCHAR(10),@counter), @tableName)
      END
      SET @counter=@counter+1
      FETCH NEXT FROM lookupTableRow INTO @tableName
      END
      CLOSE lookupTableRow
      DEALLOCATE lookupTableRow
    As i understand i can't use ORACLE dynamic sql (execute immediate) when the table name is a parameter
    Furthermore when i execute this dynamic query in my SQL store procedure each SELECT statement return me as a result the relevant table rows , those result are different in each loop .
    So i cant do this too with ORACLE dynamic sql .
    Please advice for any solution
    * how can i use dynamic sql with table name as parameter ?
    * how can i use a "dynamic" cursor, in order to be able to display the dynamic results ?
    Thanks for the advice
    I have a SQL query (a store procedure )  that i want to convert to PLSQL
    I doesn't help when you use one term to mean another thing.
    SQL is a language used in both Oracle and other products, such as Microsoft's SQL Server. I don't know much about SQL Server, but Oracle (at least) doesn't support stored procedures in SQL itself; they have to be coded in some other language, such as PL/SQL.  
    As i understand i can't use ORACLE dynamic sql (execute immediate) when the table name is a parameter
    If the table name is a parameter (or only known at run-time for any reason), that's exactly the kind of situation where you MUST use dynamic SQL.
    The number of columns that a query produces (and their datatypes) is fixed when you compile a query, whether that query is dynamic or not.  If you have multiple queries, that produce result sets with different numbers of columns, then you can't combine them into a single query.  The best you can do with one query is to add NULL columns to some of the queries so they all produce the same number of columns.
    If you're just displaying the results, there might not be any reason to combine separate result sets.  Just display one result set after another.
    Whenever you have a question, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
    Explain, using specific examples, how you get those results from that data.
    Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
    See the forum FAQ: https://forums.oracle.com/message/9362002

  • How to get the table name in the trigger definition without hard coding.

    CREATE  TRIGGER db.mytablename
    AFTER UPDATE,INSERT
    AS
        INSERT INTO table1(col1)
        SELECT InsRec.col1   
        FROM
        INSERTED Ins
       --Below i am calling one sp for which i have to pass the table name
       EXEC myspname 'tablename'
      In the above trigger,presently i am hard coding the tablename
      but is it possible to get the table name dynamically on which the trigger is defined in order to avoid hard coding the table name

    I really liked your audit table concept.  You inspired me to modify it so that, the entire recordset gets captured and added a couple of other fields.  Wanted to share my end result.
    USE [YourDB]
    GO
    /****** Object: Trigger [dbo].[iudt_AutoAuditChanges] Script Date: 10/18/2013 12:49:55 ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    ALTER TRIGGER [dbo].[iudt_AutoAuditChanges]
    ON [dbo].[YourTable]
    AFTER INSERT,DELETE,UPDATE
    AS
    BEGIN
    SET NOCOUNT ON;
    Declare @v_AuditID bigint
    IF OBJECT_ID('dbo.AutoAudit','U') IS NULL BEGIN
    CREATE TABLE [dbo].[AutoAudit]
    ( [AuditID] bigint identity,
    [AuditDate] DateTime,
    [AuditUserName] varchar(128),
    [TableName] varchar(128) NULL,
    [OldContent] XML NULL,
    [NewContent] XML NULL
    ALTER TABLE dbo.AutoAudit ADD CONSTRAINT
    PK_AutoAudit PRIMARY KEY CLUSTERED
    [AuditID]
    ) WITH( STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
    CREATE NONCLUSTERED INDEX [idx_AutoAudit_TableName_AuditDate] ON [dbo].[AutoAudit]
    ( [TableName] ASC,
    [AuditDate] ASC
    )WITH (STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
    END
    Select * Into #AuditDeleted from deleted
    Select * Into #AuditInserted from inserted
    While (Select COUNT(*) from #AuditDeleted) > 0 OR (Select COUNT(*) from #AuditInserted) > 0
    Begin
    INSERT INTO [dbo].[AutoAudit]
    ( [AuditDate], [AuditUserName], [TableName], [OldContent], [NewContent])
    SELECT
    GETDATE(),
    SUSER_NAME(),
    [TableName]=object_name([parent_obj]),
    [OldContent]=CAST((SELECT TOP 1 * FROM #AuditDeleted D FOR XML RAW) AS XML),
    [NewContent]=CAST((SELECT TOP 1 * FROM #AuditInserted I FOR XML RAW) AS XML)
    FROM sysobjects
    WHERE
    [xtype] = 'tr'
    and [name] = OBJECT_NAME(@@PROCID)
    Set @v_AuditID = SCOPE_IDENTITY()
    Delete from AutoAudit
    Where AuditID = @v_AuditID
    AND Convert(varchar(max),oldContent) = Convert(varchar(max),NewContent)
    Delete top(1) from #AuditDeleted
    Delete top(1) from #AuditInserted
    End
    END

  • How to find out the table name

    hi,
    how to find out the table name in which the data from a particular structure in a particular screen is saved,
    please tell me the procedure to find out the table name for saving the structure data that is inputted at runtime.
    Thanks,
    chinnu

    Hi Chinnu,
    Below are the tables that are referred to find out the table names
    DD02L Table contains the SAP Tables.
    DD02T Table contains the SAP Table Texts.
    DD01L Table contains the Domains
    DD01T Table contains the Domain Texts.
    DD03L Table contains the Table Fields.
    DD03T Table contains the Table Field Texts. (Language Dependent)
    DD04L Table contains the Data Elements.
    DD04T Table contains the Data Element Texts.
    DD05s Table contains the Foreign Key Fields
    last words with L and T only. L->Database Fetch T-> Text
    And the procedure to retrive the table name is as follows
    1. Go to se11
    2. Enter table name DD03T and execute
    3. In the next screen you can find Tables, fields, test etc. there you can enter the field name in the fields 
      and execute.
    4. you can get all tables which contains the field.
    I hope this will solve your problem
    Regards,
    Chandru

  • What is the table name for Workload analysis?

    Hi All TechGurus,
    We need to create an ABAP program in which it displays some information of Transaction (STO3n), Report for the same (SAPWL_ST03N)
    We want  to create an ABAP program to get the output in excel format?
    What is the table name for Workload analysis?
    Many thanks in advance!!

    Hi  Keshav,
    Thank you for your reply.
    As per my requirement, i want to create an ABAP program in which it displays some information of Transaction (STO3n) and want to send the output in excel format. however I don't understand how to start with it.
    Below are the conditions -
    1. display data for today's date
    2 .In transaction profile,  task should be Dialogue.
    from where should i fetch data which is getting displyed after executing t.code ST03n?
    Please help me with your suggessions...
    Thanks

  • Dynamically Pass the Column Name cursor. || Dynamic Column Name

    Hi,
    I need to dynamically pass the column name based on a Mapping table in a loop ( Right now i have hardcoded stuff )just like using Execute immediate.... Inside the procedure, I have commented as where i hit the problem.
    Thanks for all of your time...
    Thanks
    Muthu
    CREATE OR REPLACE PROCEDURE xml_testing_clob AS
    doc xmldom.DOMDocument;
    main_node xmldom.DOMNode;
    root_node xmldom.DOMNode;
    user_node xmldom.DOMNode; item_node xmldom.DOMNode;
    root_elmt xmldom.DOMElement;
    item_elmt xmldom.DOMElement;
    item_text xmldom.DOMText;
    item_test xmldom.DOMText;
    nodelist xmldom.DOMNodeList;
    sub_variable varchar2(4000);
    x varchar2(200);
    y varchar2(200);
    sub_var varchar2(4000);
    CURSOR get_users IS
    SELECT FIRST_NAME,LAST_NAME,ROWNUM FROM USER_INFO_TBL WHERE WEIN_NUMBER = '1234' ;
    CURSOR get_cdisc_name IS
    select CTS_COL_NAME,CDISC_NAME from CTS2CDISC_DICTIONARY where CTS_TABLE_NAME = 'USER_INFO_TBL';
    BEGIN
    -- get document
    doc := xmldom.newDOMDocument;
    doc := xmldom.NewDomDocument;
    xmldom.setVersion(doc, '1.0');
    xmldom.setStandalone(doc, 'no');
    xmldom.setCharSet(doc, 'ISO-8859-1');
    -- create root element main_node := xmldom.makeNode(doc);
    root_elmt := xmldom.createElement(doc,'AdminData');
    root_node := xmldom.appendChild(main_node,xmldom.makeNode(root_elmt));
    FOR get_users_rec IN get_users LOOP
    item_elmt := xmldom.createElement(doc,'User');
    xmldom.setAttribute(item_elmt,'OID' , get_users_rec.rownum);
    user_node := xmldom.appendChild(root_node,xmldom.makeNode(item_elmt));
    FOR cv_get_cdisc_name IN get_cdisc_name LOOP
    EXIT WHEN get_cdisc_name%NOTFOUND;
    sub_var := cv_get_cdisc_name.cts_col_name;
    sub_variable := 'get_users_rec.';
    sub_variable := 'get_users_rec.'||cv_get_cdisc_name.cts_col_name;
    x := sub_variable;
    dbms_output.put_line(x); -------------- Here i just see the literal string
    y := get_users_rec.FIRST_NAME;
    dbms_output.put_line(y); -------------- Here i just see actual value ( data )
    item_elmt := xmldom.createElement(doc,cv_get_cdisc_name.cdisc_name);
    item_node := xmldom.appendChild(user_node,xmldom.makeNode(item_elmt));
    item_text := xmldom.createTextNode(doc,x ); ---- This is the place i am hitting with an error .
    If i use variable X then i am able to see only the literal
    string in the output. BUT if i put cursor name.coulmname,
    then the resumt (XML) is fine.I wanted acheive this
    dynamically just like execute Immediate
    item_node := xmldom.appendChild( item_node , xmldom.makeNode(item_text));
    END LOOP;
    END LOOP;
    -- write document to file using default character set from database
    xmldom.WRITETOCLOB(doc,);
    xmldom.writeToFile(doc, 'c:\ash\testing_out.xml');
    -- free resources
    xmldom.freeDocument(doc);
    END;
    +++++++++++++++++++++++++++++++++++ XML OUTPUT +++++++++++++++++++++++++++++++++++++++++
    <?xml version="1.0" ?>
    - <AdminData>
    - <User OID="1">
    <FirstName>get_users_rec.FIRST_NAME</FirstName>
    <LastName>get_users_rec.LAST_NAME</LastName> </User>
    - <User OID="2">
    <FirstName>get_users_rec.FIRST_NAME</FirstName>
    <LastName>get_users_rec.LAST_NAME</LastName>
    </User>
    - <User OID="3">
    <FirstName>get_users_rec.FIRST_NAME</FirstName>
    <LastName>get_users_rec.LAST_NAME</LastName>
    </User>
    - <User OID="4">
    <FirstName>get_users_rec.FIRST_NAME</FirstName>
    <LastName>get_users_rec.LAST_NAME</LastName>
    </User>
    - <User OID="5">
    <FirstName>get_users_rec.FIRST_NAME</FirstName>
    <LastName>get_users_rec.LAST_NAME</LastName>
    </User>
    ++++++++++++++++++++++++++++++++++++++++++++++++++++ MAPPING TABLE DETAILS +++++++++++++++++
    CTS_COL_NAME     CDISC_NAME     CTS_TABLE_NAME     XML_TAG     -----------> Column Name
    FIRST_NAME     FirstName     USER_INFO_TBL     Element     -----------> Records
    LAST_NAME     LastName     USER_INFO_TBL     Element     -----------> Records

    My scenario is little different, let me explain:
    My columns will remain same but values changes (based on column formula) according to the selected prompt value
    If I select 'Oct' from prompt then
    Curr will contain data for 'Oct' only
    Next1 will contain data for 'Nov' only
    Next2 will contain data for 'Dec' only
    Next3 will contain data for 'Jan' of next year only.
    Later if I select 'Jul' from prompt then
    Curr will contain data for 'Jul' only
    Next1 will contain data for 'Aug' only
    Next2 will contain data for 'Sep' only
    Next3 will contain data for 'Oct' only.
    I don't have different columns for each months but the columns are capable to reflect data for any month.
    So, how can I reflect the column name as month name for which that contains data.
    Regards,
    S Anand

  • To Get all the Table Names

    Hi All
    I have nearly 70 procedures in my database.
    I want to get all the distinct table names used in the 70 procedures.
    Is it possible?
    Note:
    All the table names are prefixed by schema name like DEVSRC.table_name.
    Please advice
    Thanks
    Jo

    Johney  wrote:
    Hi VT
    One doubt.
    This query will give the table names of only select stmt used in the procedure
    or
    List of table names that are with in any DML operations inside the procedure?
    Thanks
    JoIt will give all the table either used in select or in any DML..
    You can also check by creating a temp proc
    SQL> drop procedure proc_test;
    Procedure dropped.
    SQL> select name, referenced_name, dependency_type from user_dependencies
      2  where type = 'PROCEDURE' and referenced_type = 'TABLE' and name='PROC_TEST';
    no rows selected
    SQL> create or replace
      2  PROCEDURE proc_test
      3  IS
      4  v_ID    number;
      5  v_PRID  number;
      6  v_PRLID number;
      7  v_DATERECEIVED date;
      8  Cursor C1 is
      9  select * from table_c;
    10   BEGIN
    11   open c1;
    12     LOOP
    13      FETCH c1 INTO v_ID,v_PRID,v_PRLID,v_DATERECEIVED;
    14      EXIT WHEN c1%NOTFOUND;
    15      insert into table_b values(v_ID,v_PRID,v_PRLID,v_DATERECEIVED);
    16      Commit;
    17     END LOOP;
    18   CLOSE C1;
    19   END;
    20  /
    Procedure created.
    SQL> select name, referenced_name, dependency_type from user_dependencies
      2  where type = 'PROCEDURE' and referenced_type = 'TABLE' and name='PROC_TEST';
    NAME
    REFERENCED_NAME                                                  DEPE
    PROC_TEST
    TABLE_B                                                          HARD
    PROC_TEST
    TABLE_C                                                          HARD
    SQL> Regards
    Umesh

  • How can i fetch the city name from database according the state name

    If you have any example of Dyamic List box.
    How can i fetch the city name from database according the state name when i select the state name in a dynamic list box.
    Thanks

    When i run the this code it is giving the an exception
    org.apache.jasper.JasperException: javax.servlet.ServletException: javax.servlet.jsp.JspException: javax.faces.el.EvaluationException: javax.faces.FacesException: javax.faces.FacesException: Can't instantiate class: 'com.mypackage.MyBean'.. class com.mypackage.MyBean : java.lang.NullPointerException
         org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:541)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:417)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
         com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
         org.ajax4jsf.framework.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:108)
         org.ajax4jsf.framework.ajax.AjaxViewHandler.renderView(AjaxViewHandler.java:233)
         com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
         com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
         org.ajax4jsf.framework.ajax.xmlfilter.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:127)
         org.ajax4jsf.framework.ajax.xmlfilter.BaseFilter.doFilter(BaseFilter.java:277)
    root cause
    javax.servlet.ServletException: javax.servlet.jsp.JspException: javax.faces.el.EvaluationException: javax.faces.FacesException: javax.faces.FacesException: Can't instantiate class: 'com.mypackage.MyBean'.. class com.mypackage.MyBean : java.lang.NullPointerException
         org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:846)
         org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:779)
         org.apache.jsp.test_jsp._jspService(test_jsp.java:95)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
         com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
         org.ajax4jsf.framework.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:108)
         org.ajax4jsf.framework.ajax.AjaxViewHandler.renderView(AjaxViewHandler.java:233)
         com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
         com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
         org.ajax4jsf.framework.ajax.xmlfilter.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:127)
         org.ajax4jsf.framework.ajax.xmlfilter.BaseFilter.doFilter(BaseFilter.java:277)
    root cause
    javax.faces.el.EvaluationException: javax.faces.FacesException: javax.faces.FacesException: Can't instantiate class: 'com.mypackage.MyBean'.. class com.mypackage.MyBean : java.lang.NullPointerException
         com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:190)
         com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:143)
         com.sun.faces.application.ApplicationImpl.createComponent(ApplicationImpl.java:406)
         javax.faces.webapp.UIComponentTag.createComponent(UIComponentTag.java:1019)
         javax.faces.webapp.UIComponentTag.createChild(UIComponentTag.java:1046)
         javax.faces.webapp.UIComponentTag.findComponent(UIComponentTag.java:761)
         javax.faces.webapp.UIComponentTag.doStartTag(UIComponentTag.java:451)
         com.sun.faces.taglib.html_basic.SelectOneMenuTag.doStartTag(SelectOneMenuTag.java:487)
         org.apache.jsp.test_jsp._jspx_meth_h_005fselectOneMenu_005f0(test_jsp.java:259)
         org.apache.jsp.test_jsp._jspx_meth_h_005fpanelGroup_005f0(test_jsp.java:219)
         org.apache.jsp.test_jsp._jspx_meth_h_005fpanelGrid_005f0(test_jsp.java:189)
         org.apache.jsp.test_jsp._jspx_meth_h_005fform_005f0(test_jsp.java:160)
         org.apache.jsp.test_jsp._jspx_meth_f_005fview_005f0(test_jsp.java:127)
         org.apache.jsp.test_jsp._jspService(test_jsp.java:86)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
         com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
         org.ajax4jsf.framework.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:108)
         org.ajax4jsf.framework.ajax.AjaxViewHandler.renderView(AjaxViewHandler.java:233)
         com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
         com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
         org.ajax4jsf.framework.ajax.xmlfilter.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:127)
         org.ajax4jsf.framework.ajax.xmlfilter.BaseFilter.doFilter(BaseFilter.java:277)
    root cause
    javax.faces.FacesException: javax.faces.FacesException: Can't instantiate class: 'com.mypackage.MyBean'.. class com.mypackage.MyBean : java.lang.NullPointerException
         com.sun.faces.application.ApplicationAssociate.createAndMaybeStoreManagedBeans(ApplicationAssociate.java:292)
         com.sun.faces.el.VariableResolverImpl.resolveVariable(VariableResolverImpl.java:97)
         com.sun.faces.el.impl.NamedValue.evaluate(NamedValue.java:145)
         com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:166)
         com.sun.faces.el.impl.ExpressionEvaluatorImpl.evaluate(ExpressionEvaluatorImpl.java:263)
         com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:160)
         com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:143)
         com.sun.faces.application.ApplicationImpl.createComponent(ApplicationImpl.java:406)
         javax.faces.webapp.UIComponentTag.createComponent(UIComponentTag.java:1019)
         javax.faces.webapp.UIComponentTag.createChild(UIComponentTag.java:1046)
         javax.faces.webapp.UIComponentTag.findComponent(UIComponentTag.java:761)
         javax.faces.webapp.UIComponentTag.doStartTag(UIComponentTag.java:451)
         com.sun.faces.taglib.html_basic.SelectOneMenuTag.doStartTag(SelectOneMenuTag.java:487)
         org.apache.jsp.test_jsp._jspx_meth_h_005fselectOneMenu_005f0(test_jsp.java:259)
         org.apache.jsp.test_jsp._jspx_meth_h_005fpanelGroup_005f0(test_jsp.java:219)
         org.apache.jsp.test_jsp._jspx_meth_h_005fpanelGrid_005f0(test_jsp.java:189)
         org.apache.jsp.test_jsp._jspx_meth_h_005fform_005f0(test_jsp.java:160)
         org.apache.jsp.test_jsp._jspx_meth_f_005fview_005f0(test_jsp.java:127)
         org.apache.jsp.test_jsp._jspService(test_jsp.java:86)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
         com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
         org.ajax4jsf.framework.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:108)
         org.ajax4jsf.framework.ajax.AjaxViewHandler.renderView(AjaxViewHandler.java:233)
         com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
         com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
         org.ajax4jsf.framework.ajax.xmlfilter.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:127)
         org.ajax4jsf.framework.ajax.xmlfilter.BaseFilter.doFilter(BaseFilter.java:277)
    root cause
    javax.faces.FacesException: Can't instantiate class: 'com.mypackage.MyBean'.. class com.mypackage.MyBean : java.lang.NullPointerException
         com.sun.faces.config.ManagedBeanFactory.newInstance(ManagedBeanFactory.java:229)
         com.sun.faces.application.ApplicationAssociate.createAndMaybeStoreManagedBeans(ApplicationAssociate.java:282)
         com.sun.faces.el.VariableResolverImpl.resolveVariable(VariableResolverImpl.java:97)
         com.sun.faces.el.impl.NamedValue.evaluate(NamedValue.java:145)
         com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:166)
         com.sun.faces.el.impl.ExpressionEvaluatorImpl.evaluate(ExpressionEvaluatorImpl.java:263)
         com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:160)
         com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:143)
         com.sun.faces.application.ApplicationImpl.createComponent(ApplicationImpl.java:406)
         javax.faces.webapp.UIComponentTag.createComponent(UIComponentTag.java:1019)
         javax.faces.webapp.UIComponentTag.createChild(UIComponentTag.java:1046)
         javax.faces.webapp.UIComponentTag.findComponent(UIComponentTag.java:761)
         javax.faces.webapp.UIComponentTag.doStartTag(UIComponentTag.java:451)
         com.sun.faces.taglib.html_basic.SelectOneMenuTag.doStartTag(SelectOneMenuTag.java:487)
         org.apache.jsp.test_jsp._jspx_meth_h_005fselectOneMenu_005f0(test_jsp.java:259)
         org.apache.jsp.test_jsp._jspx_meth_h_005fpanelGroup_005f0(test_jsp.java:219)
         org.apache.jsp.test_jsp._jspx_meth_h_005fpanelGrid_005f0(test_jsp.java:189)
         org.apache.jsp.test_jsp._jspx_meth_h_005fform_005f0(test_jsp.java:160)
         org.apache.jsp.test_jsp._jspx_meth_f_005fview_005f0(test_jsp.java:127)
         org.apache.jsp.test_jsp._jspService(test_jsp.java:86)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
         com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
         org.ajax4jsf.framework.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:108)
         org.ajax4jsf.framework.ajax.AjaxViewHandler.renderView(AjaxViewHandler.java:233)
         com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
         com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
         org.ajax4jsf.framework.ajax.xmlfilter.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:127)
         org.ajax4jsf.framework.ajax.xmlfilter.BaseFilter.doFilter(BaseFilter.java:277)
    root cause
    java.lang.ClassNotFoundException: class com.mypackage.MyBean : java.lang.NullPointerException
         java.beans.Beans.instantiate(Unknown Source)
         java.beans.Beans.instantiate(Unknown Source)
         com.sun.faces.config.ManagedBeanFactory.newInstance(ManagedBeanFactory.java:223)
         com.sun.faces.application.ApplicationAssociate.createAndMaybeStoreManagedBeans(ApplicationAssociate.java:282)
         com.sun.faces.el.VariableResolverImpl.resolveVariable(VariableResolverImpl.java:97)
         com.sun.faces.el.impl.NamedValue.evaluate(NamedValue.java:145)
         com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:166)
         com.sun.faces.el.impl.ExpressionEvaluatorImpl.evaluate(ExpressionEvaluatorImpl.java:263)
         com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:160)
         com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:143)
         com.sun.faces.application.ApplicationImpl.createComponent(ApplicationImpl.java:406)
         javax.faces.webapp.UIComponentTag.createComponent(UIComponentTag.java:1019)
         javax.faces.webapp.UIComponentTag.createChild(UIComponentTag.java:1046)
         javax.faces.webapp.UIComponentTag.findComponent(UIComponentTag.java:761)
         javax.faces.webapp.UIComponentTag.doStartTag(UIComponentTag.java:451)
         com.sun.faces.taglib.html_basic.SelectOneMenuTag.doStartTag(SelectOneMenuTag.java:487)
         org.apache.jsp.test_jsp._jspx_meth_h_005fselectOneMenu_005f0(test_jsp.java:259)
         org.apache.jsp.test_jsp._jspx_meth_h_005fpanelGroup_005f0(test_jsp.java:219)
         org.apache.jsp.test_jsp._jspx_meth_h_005fpanelGrid_005f0(test_jsp.java:189)
         org.apache.jsp.test_jsp._jspx_meth_h_005fform_005f0(test_jsp.java:160)
         org.apache.jsp.test_jsp._jspx_meth_f_005fview_005f0(test_jsp.java:127)
         org.apache.jsp.test_jsp._jspService(test_jsp.java:86)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
         com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
         org.ajax4jsf.framework.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:108)
         org.ajax4jsf.framework.ajax.AjaxViewHandler.renderView(AjaxViewHandler.java:233)
         com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
         com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
         org.ajax4jsf.framework.ajax.xmlfilter.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:127)
         org.ajax4jsf.framework.ajax.xmlfilter.BaseFilter.doFilter(BaseFilter.java:277)
    root cause
    java.lang.NullPointerException
         javax.faces.model.SelectItem.setValue(SelectItem.java:254)
         javax.faces.model.SelectItem.<init>(SelectItem.java:138)
         javax.faces.model.SelectItem.<init>(SelectItem.java:96)
         com.mypackage.MyBean.fillCountryItems(MyBean.java:80)
         com.mypackage.MyBean.<init>(MyBean.java:28)
         sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         java.lang.reflect.Constructor.newInstance(Unknown Source)
         java.lang.Class.newInstance0(Unknown Source)
         java.lang.Class.newInstance(Unknown Source)
         java.beans.Beans.instantiate(Unknown Source)
         java.beans.Beans.instantiate(Unknown Source)
         com.sun.faces.config.ManagedBeanFactory.newInstance(ManagedBeanFactory.java:223)
         com.sun.faces.application.ApplicationAssociate.createAndMaybeStoreManagedBeans(ApplicationAssociate.java:282)
         com.sun.faces.el.VariableResolverImpl.resolveVariable(VariableResolverImpl.java:97)
         com.sun.faces.el.impl.NamedValue.evaluate(NamedValue.java:145)
         com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:166)
         com.sun.faces.el.impl.ExpressionEvaluatorImpl.evaluate(ExpressionEvaluatorImpl.java:263)
         com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:160)
         com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:143)
         com.sun.faces.application.ApplicationImpl.createComponent(ApplicationImpl.java:406)
         javax.faces.webapp.UIComponentTag.createComponent(UIComponentTag.java:1019)
         javax.faces.webapp.UIComponentTag.createChild(UIComponentTag.java:1046)
         javax.faces.webapp.UIComponentTag.findComponent(UIComponentTag.java:761)
         javax.faces.webapp.UIComponentTag.doStartTag(UIComponentTag.java:451)
         com.sun.faces.taglib.html_basic.SelectOneMenuTag.doStartTag(SelectOneMenuTag.java:487)
         org.apache.jsp.test_jsp._jspx_meth_h_005fselectOneMenu_005f0(test_jsp.java:259)
         org.apache.jsp.test_jsp._jspx_meth_h_005fpanelGroup_005f0(test_jsp.java:219)
         org.apache.jsp.test_jsp._jspx_meth_h_005fpanelGrid_005f0(test_jsp.java:189)
         org.apache.jsp.test_jsp._jspx_meth_h_005fform_005f0(test_jsp.java:160)
         org.apache.jsp.test_jsp._jspx_meth_f_005fview_005f0(test_jsp.java:127)
         org.apache.jsp.test_jsp._jspService(test_jsp.java:86)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
         com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
         org.ajax4jsf.framework.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:108)
         org.ajax4jsf.framework.ajax.AjaxViewHandler.renderView(AjaxViewHandler.java:233)
         com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
         com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
         org.ajax4jsf.framework.ajax.xmlfilter.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:127)
         org.ajax4jsf.framework.ajax.xmlfilter.BaseFilter.doFilter(BaseFilter.java:277)

  • How to look for the Table Name

    Hi Friends,
    Sometimes we need to download the table for the desired information if the same is not available from a particular report. How to look for the table name? Is there a report or a particular feild, where we can find the name of the particular table?
    Thanks for the assistance.
    Regards

    Hi Friend,
    If you want to see the structures then go to SE11. Sometimes it happens that you cannot find the table names but only fields. In such case, if you want to find the Table names which is not available, then go to SE90.
    Abap Dictionary > Fields > Table Fields.
    Now Enter the Field name in Right Hand Side of the screen then Execute. You will see the all tables by which that Fields are used.
    Regards,
    Jigar

  • How can I get the table name of a field..

    Hi,
    If we know the table name we can find all the fileds from it
    using desc <tablename>.
    But, I would like to find table name of a known field's name.
    Where all these fields are storing in the database.
    THanks in Advance,
    Srinivasulu.

    ALL_TAB_COLUMNS
    rgds, APC

Maybe you are looking for

  • IOS: Device not recognized in iTunes via wifi

    After updating my iphone 5 to ios 7.1, my device is not recognized in itunes for mac... obviously I have updated itunes too but the device still is not seen by itunes. I've tried to reboot both iphone and mac.. but still does not work... any tips?

  • Satellite A500-15M: Cannot connect to TV using HDMI

    Hi, I have a Satellite A500-15M. I recently tried to connect to my TV so I could watch some online shows on my Hannspree Xv HD ready TV. The HDMI out doesn't register at all on the TV - the TV displays a message 'not supported' and remains blank (as

  • IMac Blueberry changing Display resolution default settings

    Hey everyone.... after a quick search I found this old archived post: 333 iMac OS 10.3.2 screen resolution? Posted: Oct 4, 2005 3:50 PM My mum is using an elderly 333 MHz iMac, tray-loading. She wanted to upgrade from system 8.6, so I updated the fir

  • Adjustment / ABC analysis

    Hi Gurus Can you anyone gimme a details of ABC analysis?? Is there any chance to change in the class automatically?(Ex A to B), In regualr scenarious how the industries are using and handling??? Please gimme some ideas SP

  • Sales Order Change -- Pop-up  window

    Hi All, I have a requirement. If some one changes a sales order. A pop-up window should apprear and give some message of what they should do next Eg : Please change inco-terms, Payment terms etc. Please advice me how I can achive this requirement. An