E)2581279 Assert failed in /modules/streams/flv/TCFLVData.cpp line 1202
In an application where I do a recording from webcam to fms,
sometimes I obtain this error in core.XX.log:
(e)2581279 Assert failed in
/modules/streams/flv/TCFLVData.cpp line 1202 -
when it happens the effect client side is that I try to play
a stream just recorded, and I see a stream of 0 seconds, with the
command: stream.play(nomefile, 0, -1, true);
often when I obtain this error the durantion of the stream
from the media server is very different form the real one recorded.
How could I resolve this situation or work around it?
thanks for your time and all of your suggestions and helps
filippo
thanks patrick for your interest.
we're using the 2.0.3.
this error code was never traced in the log file of the 2.0.2
Similar Messages
-
Assert failed in /modules/streams/flv/TCFLVData.cpp
Hi,
We're running FMS 3.5.2 r654 on RHEL 5.2 and we're getting tons of errors like this:
"2009-08-31 10:47:43 11394 (e)2581279 Assert failed in /modules/streams/flv/TCFLVData.cpp line 2033 -"
Always the same line number.
Can we safely ignore this error? What does it mean?
We're only getting this since 3.5.2. We were running FMS 3.5.1 before, and weren't getting this error, but upgraded to get rid of the occasional "core experienced [x] failures"-crashes.
Kind regards,
Pieter Barrezeelethanks patrick for your interest.
we're using the 2.0.3.
this error code was never traced in the log file of the 2.0.2 -
Assert failed in tincan/server/rtmfp/rtmfpcoresession.cpp line 1696
Hi,
sometimes I have this error from the core.00.log with FMS 4.5.1 Linux
so the instance shutdown and the log says that the script itself shutdown.
Any clue ?
Thanks
FranckThis assert might show up in case the current keyframe has time less than or equal to previous keyframe. Is there a case where it at your end? also, could you please send me full FMS logs @ :[email protected]
Thanks -
When running Mozilla Foxfire we get the error message listed in question. It asks: For information on how your program can cause assertion failure, see Visual C++ documentation on asserts (Pree retry to debug the application - JLT must be enabled. Then offers "Abort" - "Retry" - "Ignore". I do not know what this is telling me to do. Where is Visual C++ documentation on asserts. What do I need to do to keep from getting this error message?
In the past, this issue was associated with the Flash player's protected mode, and particularly with out-of-date RealPlayer-related add-ons that interacted poorly with Flash 11.3 and higher.
To see whether you are experiencing a Flash-related interaction, try this: temporarily disable "protected mode" as described in this support article from Adobe under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
If that bypasses the error, check your other add-ons and remove, disable, or update them. Then allow Flash to run in protected mode as designed, restart Firefox, and test again.
orange Firefox button (or Tools menu) > Add-ons > Plugins category<br>
orange Firefox button (or Tools menu) > Add-ons > Extensions category -
Hello!
I'm using FMS3.5 2 on Windows2008 server(8core i7xeon, 12G ram, 2Gbps internet connection/ 1000 concurrent users).
but sometimes my fms server encounter the "assert failed in" error. and hung up --;
so I have to reboot my server.
how can i solve this problem?
thank you!
===================================================================
#Version: 1.0
#Start-Date: 2009-07-28 00:31:55
#Software: Adobe Flash Media Server 3.5.2 r654
#Date: 2009-07-28
#Fields: date time x-pid x-status x-ctx x-comment
2009-07-28 00:31:55 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:31:55 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:31:55 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:31:55 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:32:32 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:32:32 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:32:32 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:32:32 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:32:42 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:32:42 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:32:42 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:32:42 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:32:51 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:32:51 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:32:51 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:32:51 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:33:24 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:33:24 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:33:24 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 00:33:24 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:57:59 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:57:59 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:57:59 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:57:59 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:58:32 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:58:32 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:58:32 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:58:32 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:58:48 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:58:48 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:58:48 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:58:48 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:59:15 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:59:15 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:59:15 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:59:15 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:59:36 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:59:36 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:59:36 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 02:59:36 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 03:05:53 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 03:05:53 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 03:05:53 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 03:05:53 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 06:12:37 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 06:12:37 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 06:12:37 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 06:12:37 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 06:13:22 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 06:13:22 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 06:13:23 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 06:13:23 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 06:14:43 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 06:14:43 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 06:14:43 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 06:14:43 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:30:43 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:30:43 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:30:43 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:30:43 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:38:03 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:38:03 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:38:03 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:38:03 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:40:53 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:40:53 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:40:53 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:40:53 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:41:51 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:41:51 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:41:51 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 07:41:51 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:01:50 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:01:50 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:01:50 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:01:50 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:22:46 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:22:47 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:22:47 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:22:47 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:23:07 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:23:07 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:23:07 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:23:07 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:23:28 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:23:28 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:23:28 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 08:23:28 4212 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
#Date: 2009-07-28
#Fields: date time x-pid x-status x-ctx x-comment
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 98 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 98 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 98 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 98 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 98 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 98 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 98 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 98 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 98 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 98 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 98 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 98 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 65 -
2009-07-28 11:02:23 4220 (e)2581279 Assert failed in .\core\flvcursor.cpp line 98 -
2009-07-28 11:02:27 4212 (i)2581247 Core (4212) disconnected from edge. -
#Date: 2009-07-28
#Fields: date time x-pid x-status x-ctx x-comment
2009-07-28 11:02:27 2192 (i)2581247 Core (2192) disconnected from edge. -
#Date: 2009-07-28
#Fields: date time x-pid x-status x-ctx x-comment
2009-07-28 11:02:27 4204 (i)2581247 Core (4204) disconnected from edge. -
2009-07-28 11:02:30 4212 (i)2581233 Core (4212) disconnecting from admin: 200. -
2009-07-28 11:02:30 4204 (i)2581233 Core (4204) disconnecting from admin: 200. -
#Date: 2009-07-28
#Fields: date time x-pid x-status x-ctx x-comment
2009-07-28 11:09:39 3876 (i)2581237 Starting admin app on core (3876). -
2009-07-28 11:09:39 3876 (i)2581238 Core (3876) connecting to admin. -
2009-07-28 11:09:39 3876 (i)2581231 Core (3876) connected to admin. -
#Date: 2009-07-28
#Fields: date time x-pid x-status x-ctx x-comment
2009-07-28 11:09:39 3868 (i)2581237 Starting admin app on core (3868). -
2009-07-28 11:09:39 3868 (i)2581238 Core (3868) connecting to admin. -
2009-07-28 11:09:39 3868 (i)2581231 Core (3868) connected to admin. -
2009-07-28 11:09:39 3868 (i)2581246 Core (3868) sending register cmd to edge. -
2009-07-28 11:09:39 3876 (i)2581246 Core (3876) sending register cmd to edge. -
2009-07-28 11:09:40 3876 (i)2581234 Core (3876) connection to admin accepted. -
2009-07-28 11:09:40 3868 (i)2581234 Core (3868) connection to admin accepted. -
#Date: 2009-07-28
#Fields: date time x-pid x-status x-ctx x-comment
2009-07-28 11:09:41 6536 (i)2581237 Starting admin app on core (6536). -
2009-07-28 11:09:41 6536 (i)2581238 Core (6536) connecting to admin. -
2009-07-28 11:09:41 6536 (i)2581231 Core (6536) connected to admin. -
2009-07-28 11:09:41 6536 (i)2581234 Core (6536) connection to admin accepted. -
2009-07-28 11:09:41 6536 (i)2581246 Core (6536) sending register cmd to edge. -
#Date: 2009-07-28
#Fields: date time x-pid x-status x-ctx x-comment
2009-07-28 11:09:38 2192 (i)2581246 Core (2192) sending register cmd to edge. -
2009-07-28 13:29:57 3868 (w)2611372 The FLV segment cache is full. -
2009-07-28 14:25:20 6536 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 14:25:20 6536 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 14:25:21 6536 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 14:25:21 6536 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 14:44:37 6536 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 14:44:37 6536 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 14:44:37 6536 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -
2009-07-28 14:44:37 6536 (e)2581279 Assert failed in .\FMSSyncFileIo.cpp line 434 -Update from dev on this issue:
Looked at the assert, it's because the two versions connecting don't speak quite the same connect message and the newer one has three properties that the old won't send it. However, there's no indication that it will do anything to the client because of the absence of these as they're only used for RTMFP and the asserts are hamless though annoying.
I am unable to see any client disconnects or playback issues when the assert happens. Are you sure you got them consistently ? As long as there are no client disconnects, I think we are good with the current behavior (except for few extra lines in the logs )
Thank you ! -
Assert failed in /util/TCSysUtil.cpp line 729
I have looked everywhere for an answer to this problem and have had no luck. When I start FMS2 this error continues to scroll. What is the cause of this and how can I fix it?
#Version: 1.0
#Start-Date: 2011-07-21 00:09:42
#Software: Macromedia Flash Media Server 2.0 r1145
#Date: 2011-07-21
#Fields: date time x-pid x-status x-ctx x-comment
2011-07-21 00:09:42 11907 (w)2581201 No primary license key found. Switching to Developer Edition. -
2011-07-21 00:09:42 11907 (i)2581246 Core (11907) sending register cmd to edge. -
2011-07-21 00:09:44 11907 (e)2581279 Assert failed in /util/TCSysUtil.cpp line 729 -
2011-07-21 00:09:45 11907 (e)2581279 Assert failed in /util/TCSysUtil.cpp line 729 -
2011-07-21 00:09:46 11907 (e)2581279 Assert failed in /util/TCSysUtil.cpp line 729 -
2011-07-21 00:09:47 11907 (e)2581279 Assert failed in /util/TCSysUtil.cpp line 729 -
2011-07-21 00:09:48 11907 (e)2581279 Assert failed in /util/TCSysUtil.cpp line 729 -
2011-07-21 00:09:49 11907 (e)2581279 Assert failed in /util/TCSysUtil.cpp line 729 -
2011-07-21 00:09:50 11907 (e)2581279 Assert failed in /util/TCSysUtil.cpp line 729 -
2011-07-21 00:09:51 11907 (e)2581279 Assert failed in /util/TCSysUtil.cpp line 729 -
2011-07-21 00:09:52 11907 (e)2581279 Assert failed in /util/TCSysUtil.cpp line 729 -
2011-07-21 00:09:53 11907 (e)2581279 Assert failed in /util/TCSysUtil.cpp line 729 -
FMS_2_0_r1145_linux
Linux XXXXXXX.reflected.net 2.6.18-238.el5PAE #1 SMP Thu Jan 13 17:10:20 EST 2011 i686 i686 i386 GNU/Linux
CentOS release 5.6 (Final)Hi,
I looked through this and it seems there is a problem in parsing /proc/meminfo.
Can you please see to it that the file has appropriate permissions and if that is Ok, it would help if you can do a 'cat /proc/meminfo' and post it here.
Thanks! -
Assert failed in /server/admin/FCSAdminServer.cpp
one of our FMS 2.0.3 from some days is writing every minute
in the admin.XX.log the error:
2007-01-17 10:20:19 1129 (e)2581279 Assert failed in
/server/admin/FCSAdminServer.cpp line 361 -
2007-01-17 10:21:20 1129 (e)2581279 Assert failed in
/server/admin/FCSAdminServer.cpp line 361 -
2007-01-17 10:22:20 1129 (e)2581279 Assert failed in
/server/admin/FCSAdminServer.cpp line 361 -
but we don't touch the server and the applications on it.
any kind of help or suggestions about this behaviour
thanks in advantage for your timeciao,
sorry, but we have not solved the problem -
"Assertion failed" error when executing a simple UCI program
I am using a simple UCI program (tt1.c) with Xmath version 7.0.1 on Sloaris 2.8 that performs the followings:
- Start Xmath701
- Sleep 10 Seconds
- Load a sysbuild model
- Stop Xmath
I am calling the uci executable using the following command:
> /usr/local/apps/matrixx-7.0.1/bin/xmath -call tt1 &
In this way everything works fine and the following printouts from the program are produced.
--------- uci printout ----------
## Starting Xmath 701
## sleep 10 seconds
## load "case_h_cs_ds.xmd";
## Stopping Xmath 701
All the processes (tt1, XMATH, xmath_mon, and sysbld) terminate correctly.
The problem occurs if the 10 second wait after starting xmath is omitted:
- Start Xmath701
- Load a sysbuild model
- Stop Xmath
This results to the following printouts:
--------- uci printout ----------
## Starting Xmath 701
## load "case_h_cs_ds.xmd";
Assertion failed: file "/vob1/xm/ipc/ipc.cxx", line 420 errno 0.
Note that the last line is not produced by the uci program and the tt1 did not
finish (the printout before stopping xmath "## Stopping Xmath 701" was
not produced).
A call to the unix "ps -ef" utility shows that none of the related process has been terminated:
fs085312 27631 20243 0 10:45:29 pts/27 0:00 tt1
fs085312 27643 1 0 10:45:30 ? 0:00 /usr/local/apps/matrixx-7.0.1/solaris_mx_70.1/xmath/bin/xmath_mon /usr/local/app
fs085312 27641 27631 0 10:45:30 ? 0:01 /usr/local/apps/matrixx-7.0.1/solaris_mx_70.1/xmath/bin/XMATH 142606339, 0x8800
fs085312 25473 25446 0 10:45:33 ? 0:01 sysbld ++ 19 4 7 6 5 8 9 0 25446 ++
The questions are as follows:
1- What is "Assertion failed: file "/vob1/xm/ipc/ipc.cxx", line 420 errno 0" and why is that produced?
2- Should the UCI program waits for end of sysbld initialization before issuing commands?
3- If the answer to the above question is yes, is there a way to check the termination of sysbld initialization?
Thanks in advance for you help.
Attachments:
tt1.c 1 KBI tracked down the problem and it is a race condition between the many processes being started up. A smaller delay should also solve the problem. Or, maybe do something else before the first 'load'. The 'load' command tries to launch systembuild and causes the race condition.
-
i am getting the following error in my AS5300 access server
ASSERTION FAILED: file "../as/if_as_pm7366.c", line 129
6
ASSERTION FAILED: file "../as/if_as_pm7366.c", line 149
running ver is c5300-i-mz.123-26.binHi ARVINDER,
I have no idea about this error. But while going through few documents I stepped on to this bug -
CSCdm55659
The CT1 PRI on the double-density version of a Cisco AS5300 series access server might not operate properly when it is configured with a channel group and Frame Relay encapsulation on the serial port. The following error message might result when you configure the channel group:
23:31:18: ASSERTION FAILED: file "../as/if_as_pm7366.c", line 1291 23:31:18: ASSERTION FAILED: file "../as/if_as_pm7366.c", line 1491
There is no workaround.
http://www.cisco.com/en/US/docs/ios/12_0/release/notes/120tcavs.html - Resolved Caveats-Cisco IOS Release 12.0(7)T
I know you are running 12.3 IOS release. But though this might give you some clue.
-> Sushil -
Hi,
I am trying to deploy an EJB module have 4-5 EJB's on weblogic 8.1 through JBuilder.
I am getting following error during deployment.
Exception:weblogic.management.ApplicationException: prepare failed for Sample.jar
Module: Sample.jar Error: Exception preparing module: EJBModule(Sample.jar,status=NEW)
Unable to deploy EJB: SampleBean from Sample.jar:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot export non
clusterable object with jndiName ]
at weblogic.utils.Debug.assertion(Debug.java:57)
at weblogic.rmi.extensions.server.ServerHelper.exportObject(ServerHelper.java:272)
at weblogic.ejb20.internal.BaseEJBHome.setup(BaseEJBHome.java:95)
at weblogic.ejb20.internal.StatelessEJBHome.setup(StatelessEJBHome.java:67)
at weblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.prepare(ClientDrivenBeanInfoImpl.java:979)
at weblogic.ejb20.deployer.EJBDeployer.setupBeanInfos(EJBDeployer.java:983)
at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1283)
at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:477)
at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2962)
at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1534)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1188)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Any clue?, what its talking about?
Thanks
NareshHi,
I am trying to deploy an EJB module have 4-5 EJB's on weblogic 8.1 through JBuilder.
I am getting following error during deployment.
Exception:weblogic.management.ApplicationException: prepare failed for Sample.jar
Module: Sample.jar Error: Exception preparing module: EJBModule(Sample.jar,status=NEW)
Unable to deploy EJB: SampleBean from Sample.jar:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot export non
clusterable object with jndiName ]
at weblogic.utils.Debug.assertion(Debug.java:57)
at weblogic.rmi.extensions.server.ServerHelper.exportObject(ServerHelper.java:272)
at weblogic.ejb20.internal.BaseEJBHome.setup(BaseEJBHome.java:95)
at weblogic.ejb20.internal.StatelessEJBHome.setup(StatelessEJBHome.java:67)
at weblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.prepare(ClientDrivenBeanInfoImpl.java:979)
at weblogic.ejb20.deployer.EJBDeployer.setupBeanInfos(EJBDeployer.java:983)
at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1283)
at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:477)
at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2962)
at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1534)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1188)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Any clue?, what its talking about?
Thanks
Naresh -
XI AF API call failed. Module exception: Java Mapping
Hi Experts,
I have faced a typical error for one of my interface. The Scenario is SOAP to SOAP and we are performing SOAP Lookup before sending the data to Target web service. We are using one Java Mapping 'FileIns_lookupLoad.java --- com/fi/' and performing the SOAP Lookup from within the code. In the Lookup Communication channel we are using 'Axis' as message protocol and passing couple of values through Module Key parameters. We have same ESR and ID objects in Development, Quality and Production (as per Version ID and History).
Now the problem is Lookup is failing only in Development but Quality and Production is working fine. I have replaced Quality CC URL with the development WSDL URL, but that worked fine. That means Development Web Service is good. We are getting the below error in Dev:
<SAP:Stack>StreamTransformationException triggered by application mapping program com/fi/FileIns_lookupLoad; Look Up Failed</SAP:Stack>
Trace : *
<Trace level="1"
type="T"> Some Thing Wrong in LookUpError when calling an adapter by using the communication channel CC_IN_SOAP_GEInsuranceLoadLookup1 (Party: , Service: BusService_GE, Object ID: 4214805c52893ef9b0b3f0ef0902fe9e) XI AF API call failed. Module exception: 'while trying to invoke the method org.apache.axis.types.URI.toString() of an object returned from com.sap.xi.XI.Message._30.QualifiedName.getNamespace()'. Cause Exception: 'while trying to invoke the method org.apache.axis.types.URI.toString() of an object returned from com.sap.xi.XI.Message._30.QualifiedName.getNamespace()'. </Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
<Trace level="1" type="T">Java mapping com/fi/FileIns_lookupLoad has thrown a StreamTransformationException. Thrown: com.sap.aii.mapping.api.StreamTransformationException: Look Up Failed at com.fi.FileIns_lookupLoad.execute(FileIns_lookupLoad.java:282) at com.fi.FileIns_lookupLoad.transform(FileIns_lookupLoad.java:74) at com.sap.aii.ib.server.mapping.execution.JavaMapping.executeStep(JavaMapping.java:92) at com.sap.aii.ib.server.mapping.execution.Mapping.execute(Mapping.java:60) at com.sap.aii.ib.server.mapping.execution.SequenceMapping.executeStep.................................................
................................................................................<Trace level="1" type="T">Application mapping program com/fi/FileIns_lookupLoad throws a stream transformation exception: Look Up Failed Thrown: com.sap.aii.ib.core.mapping.execution.ApplicationException: Application mapping program com/fi/FileIns_lookupLoad throws a stream transformation exception: Look Up Failed at com.sap.aii.ib.server.mapping.execution.JavaMapping.executeStep(JavaMapping.java:95) at com.sap.aii.ib.server.mapping.execution.Mapping.execute(Mapping.java:60) at com.sap.aii.ib.server.mapping.execution.SequenceMapping.executeStep(SequenceMapping.java:40) at com.sap.aii.ib.server.mapping.execution.Mapping.execute
I have already checked with Basis and as per them JDK and Java versions are identical in Dev, QAS and Prod. It seems something is wrong with 'XI AF API' which we are calling from the channel. If we totally ignore Lookup process and send direct data, it is working fine. Target CC is also using Axis.
Sequence in CC: afreq ->xireq ->wssec2 ->xires ->afres
For any more information please let me know.
Thanks,
Nabendu.Hi Anupam,
The Java Mapping code is same in Dev , QAS and Prod. Also the versions of the JAR is same.
Please find the code below.
package com.fi;
import java.util.HashMap;
import com.sap.aii.mapping.api.AbstractTrace;
import com.sap.aii.mapping.api.AbstractTransformation;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import com.sap.aii.mapping.api.MappingTrace;
import com.sap.aii.mapping.api.StreamTransformationException;
import com.sap.aii.mapping.api.DynamicConfiguration;
import com.sap.aii.mapping.api.DynamicConfigurationKey;
import com.sap.aii.mapping.api.TransformationInput;
import com.sap.aii.mapping.api.TransformationOutput;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.*;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.ParserConfigurationException;
import javax.xml.transform.Result;
import javax.xml.transform.Source;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerConfigurationException;
import javax.xml.transform.TransformerException;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.OutputKeys;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.*;
import org.w3c.dom.views.AbstractView;
import org.xml.sax.SAXException;
import java.io.ByteArrayInputStream;
import com.sap.aii.mapping.lookup.*;
/*import com.sap.aii.utilxi.hmis.server.HmisEnvironment.Accessor;
//import com.sap.aii.utilxi.lock.api.LockServiceException;
//import com.pmintl.pppimes.RFCLookup.javamapping.*;
//import java.io.FileInputStream;
//import java.io.FileOutputStream;*/
import java.text.DateFormat;
import java.text.SimpleDateFormat;
//import java.text.ParseException;
import java.util.Date;
import java.io.*;
public class FileIns_lookupLoad extends AbstractTransformation{
private Map param = null;
private AbstractTrace trace = getTrace();
String senderService = null;
String inParamChannel = null;
String inParamBusService = null;
//3. Each JAVA Mapping using program 7.1 API must implement the method
// transform(TransformationInput in, TransformationOutput out)
// as oppose to execute Method in earlier version.
public void transform(TransformationInput arg0, TransformationOutput arg1) throws StreamTransformationException {
// TODO Auto-generated method stub
//4. An info message is added to trace. An instance of trace of object is obtained by calling
// the getTrace method of class AbstractTransformation
inParamChannel = arg0.getInputParameters().getString("COMM_CHANNEL");
inParamBusService = arg0.getInputParameters().getString("BUS_SERVICE");
getTrace().addInfo("Input Parameter: " + inParamChannel);
getTrace().addInfo("Input Parameter: " + inParamBusService);
this.execute(arg0.getInputPayload().getInputStream(),
arg1.getOutputPayload().getOutputStream());
//5. Input payload is obtained by using arg0.getInputPayload().getInputStream()
* @param args
public static void main(String[] args) {
// TODO Auto-generated method stub
public void execute(InputStream in, OutputStream out)
throws StreamTransformationException {
// TODO Auto-generated method stub
try
//Get The Trace
// trace = (AbstractTrace)param.get(StreamTransformationConstants.MAPPING_TRACE );
trace = getTrace();
getTrace().addInfo("Java Mapping Started");
DocumentBuilderFactory ifactory = DocumentBuilderFactory.newInstance();
DocumentBuilder ibuilder = ifactory.newDocumentBuilder();
Document IDoc = ibuilder.parse(in);
Document TDoc = ibuilder.newDocument();
String mrnVal = "";
trace.addInfo("Preparing Target Doc");
Element message = TDoc.createElementNS("urn:Medtronic.com:CATS_Patient_Transactions","n1:Mt_Insurance");
Node tRoot = TDoc.appendChild(message);
//trace.addInfo(tRoot.getNodeName());
Element sRoot = (Element)IDoc.getFirstChild();
//trace.addInfo(sRoot.getNodeName());
NodeList nl = sRoot.getChildNodes();
// trace.addInfo("Len"+nl.getLength());
//// for(int i=0;i<nl.getLength();i++)
// Node n1 = TDoc.importNode(nl.item(i), true);
// trace.addInfo("Adding Child Nodes");
// trace.addInfo(nl.item(i).getNodeName());
// tRoot.appendChild(n1);
NodeList lmrn = sRoot.getElementsByTagName("Mrn");
if(lmrn != null)
Node n1 = TDoc.importNode(lmrn.item(0), true);
Element e1 = (Element)lmrn.item(0);
//trace.addInfo(e1.getNodeName());
mrnVal = e1.getTextContent();
tRoot.appendChild(n1);
NodeList lfsc = sRoot.getElementsByTagName("Fsc");
if(lfsc != null)
for(int i=0;i<lfsc.getLength();i++){
Element n1=TDoc.createElement(lfsc.item(i).getNodeName());
tRoot.appendChild(n1);
Node fieldch = TDoc.createElement("Fields");
n1.appendChild(fieldch);
NodeList chl = lfsc.item(i).getChildNodes();
trace.addInfo("len11"+chl.getLength());
for(int j=0;j<chl.getLength();j++){
if(!chl.item(j).getNodeName().equals("FscNumber")&&!chl.item(j).getNodeName().equals("Priority")){
if(chl.item(j).hasChildNodes()){
trace.addInfo(chl.item(j).getNodeName());
Element fscfield = TDoc.createElement("FSCField");
fieldch.appendChild(fscfield);
NodeList FUQl = chl.item(j).getChildNodes();
for(int p =0;p<FUQl.getLength();p++){
//trace.addInfo(" i: "+i+" J: "+j+" P: "+p);
if(FUQl.item(p).getNodeName().equals("FUQNumber")){
//Node tFUQ = TDoc.createElement("FUQNumber");
//tFUQ.setTextContent(FUQl.item(p).getTextContent());
fscfield.setAttribute("FUQNumber", FUQl.item(p).getTextContent());
if(FUQl.item(p).getNodeName().equals("Value")){
Node tVal = TDoc.createElement("Value");
tVal.setTextContent(FUQl.item(p).getTextContent());
fscfield.appendChild(tVal);
//Node tName = TDoc.createElement("Field");
//tName.setTextContent(chl.item(j).getNodeName());
fscfield.setAttribute("Field", chl.item(j).getNodeName());
// Node fuqch = chl.item(j).getFirstChild();
// Node valch = fuqch.getNextSibling();
// if(fuqch!=null){
// Node tFUQ = TDoc.createElement("FUQNumber");
// tFUQ.setTextContent(fuqch.getTextContent());
// fscfield.appendChild(tFUQ);
// if(valch!=null){
// Node tVal = TDoc.createElement("Value");
// tVal.setTextContent(valch.getTextContent());
// fscfield.appendChild(tVal);
// Node tName = TDoc.createElement("Filed");
// tName.setTextContent(chl.item(j).getNodeName());
// fscfield.appendChild(tName);
else{
//Node numch =TDoc.importNode(chl.item(j), true);
//Element e1 =(Element)n1;
if(chl.item(j).getNodeName().equals("FscNumber")){
n1.setAttribute("Number", chl.item(j).getTextContent());
if(chl.item(j).getNodeName().equals("Priority")){
n1.setAttribute("Priority", chl.item(j).getTextContent());
//tRoot.appendChild(lfsc.item(0));
// Element e1 = (Element)lfsc.item(0);
// trace.addInfo(e1.getNodeName());
// mrnVal = e1.getNodeValue();
/////Start of Look Up Code////
//Preparing Input String
String lookUpRequest = "<LoadPatientFullInsuranceDetail><Mrn>"+mrnVal+"</Mrn></LoadPatientFullInsuranceDetail>";
trace.addInfo("Request");
trace.addInfo(lookUpRequest);
SystemAccessor acc;
Channel channel;
Payload lookupResult;
try
channel = LookupService.getChannel(inParamBusService, inParamChannel);
trace.addInfo("Got the channel");
acc = LookupService.getSystemAccessor(channel);
trace.addInfo("Got The Channel and Accessor");
InputStream ist = new ByteArrayInputStream(lookUpRequest.getBytes());
XmlPayload payload = LookupService.getXmlPayload(ist);
if(acc != null){
trace.addInfo("Got The Channel and Accessor");
trace.addInfo("Executing The Webservice");
lookupResult = acc.call(payload);
trace.addInfo("End of Executing The Webservice");
trace.addInfo(lookupResult.toString());
if(lookUpRequest!=null){
trace.addInfo("Responce is not null");
InputStream rist = lookupResult.getContent();
Document lresDoc = ibuilder.parse(rist);
Node n1 = lresDoc.getFirstChild();
trace.addInfo(n1.getNodeName());
if(n1.getNodeName().endsWith("LoadPatientFullInsuranceDetailResponse"))
Node ch1 = n1.getFirstChild();
trace.addInfo(ch1.getNodeName());
NodeList lookupnl = ch1.getChildNodes();
//trace.add
for(int i=0;i<lookupnl.getLength();i++)
Node n2 = TDoc.importNode(lookupnl.item(i), true);
trace.addInfo("Adding Child Nodes");
trace.addInfo(lookupnl.item(i).getNodeName());
tRoot.appendChild(n2);
else{
throw new StreamTransformationException("Error in Look Up"+n1.getTextContent());
//while(ch1.hasChildNodes() && !ch1.getNodeName().equals("FSCS")){
else{
trace.addWarning("Responce is null");
throw new LookupException();
catch(LookupException le)
trace.addWarning("Some Thing Wrong in LookUp"+le.getMessage());
throw new StreamTransformationException("Look Up Failed");
Transformer transformer = TransformerFactory.newInstance().newTransformer();
// StreamResult reqResult = new StreamResult(new StringWriter());
DOMSource source = new DOMSource(TDoc);
Result result = new StreamResult(out);
transformer.transform(source,result);
catch(StreamTransformationException ste)
throw new StreamTransformationException(ste.getMessage());
catch(Exception e){
trace.addInfo(e.getMessage());
finally{ -
ISR_PROCESS_EVENT assert fails
I'm trying to call ISR_PROCESS_EVENT as an RFC, passing in the data for a form, and trying to validate the fields. To do this i first call ISR_PROCESS_EVENT with mode "CREATE" and get back the fields I need. So far so good.
Later, I call the same RFC, this time passing in parameters mode = "CREATE" and event = "CHECK". When calling the RFC this second time i get an assert failed error in the code pasted below.
Is it a requirement that the "check" variation must be called from the same abap session as the initial create call? I ask this because I've been able to make it work if i write a custom function module which calls first ISR_PROCESS_EVENT CREATE with event space and then immediately call ISR_PROCESS_EVENT CREATE CHECK int he same RFC, but with the same input tables it fails if called separately. My only working assumption at this point is that it relies on the function to be initialized with CREATE first in the same session, and since I'm doing this via RFC call in two steps, this isn't the case.
Please help!
The "data_containers" are initial in class CL_IM_HRASR00ISR=>GET_PROCESS_OBJECT_HANDLER
Get all data containers from all scenarios
IF data_containers IS REQUESTED.
CALL METHOD process_object_handler->get_all_data_containers
EXPORTING
message_handler = message_handler
IMPORTING
data_containers = data_containers_xml
is_ok = is_ok.
IF is_ok EQ false.
EXIT.
ENDIF.
LOOP AT data_containers_xml INTO data_container_xml.
Create a new data container if XML is not empty
(This happens if the BAdI is called from the glue step)
IF data_container_xml-data_container IS NOT INITIAL.
CREATE OBJECT data_container
EXPORTING
xml = data_container_xml-data_container.
APPEND data_container TO data_containers.
data_container_pair-data_container = data_container.
data_container_pair-data_container_xml = data_container_xml
APPEND data_container_pair TO data_container_pairs.
ENDIF.
ENDLOOP.
ASSERT data_containers IS NOT INITIAL.
ENDIF.
Edited by: Chris Hesse on Jun 30, 2010 8:13 PM
Edited by: Chris Hesse on Jun 30, 2010 8:14 PMChris,
I have resolved the issue in our system, so maybe the same resolution will work for you. The answer is in Note [1440741|http://service.sap.com/sap/support/notes/1440741]. In our system we are on HR SP 23, which contains all the code corrections from earlier versions of this Note, but does not contain the manual corrections described (essentially creating the characteristic or data type for ASYNC_BACKGROUND_SAVE). I just had to set up the characteristic as described and our form now submits just fine. I found this only by running the ABAP debugger on Method GET_EXTERNAL_DATA_VALUE of Class CL_IM_HRASR00ISR with a breakpoint set on the line "ASSERT sy-subrc EQ 0." I just stepped through until I saw the return code turn to something other than 0, and made a note that it was looking for a fieldvalue of ASYNC_BACKGROUND_SAVE. A search of Notes for this fieldvalue turned up 1440741, and that appears to have resolved the problem. The problem was not so much with the form itself, but with the asynchronous background save in the workflow step.
Hope this helps you!
--Matt -
I get Assertion Failed open report with CR viewer 2.0.23
Post Author: gionnyDeep
CA Forum: General
any help?
Assertion Failed: java.lang.Throwable at com.crystaldecisions.reports.common.j.b.a(Unknown Source) at com.crystaldecisions.reports.common.j.b.a(Unknown Source) at com.crystaldecisions.reports.queryengine.b0.char(Unknown Source) at com.crystaldecisions.reports.queryengine.b0.else(Unknown Source) at com.crystaldecisions.reports.queryengine.b0.else(Unknown Source) at com.crystaldecisions.reports.queryengine.b0.d(Unknown Source) at com.crystaldecisions.reports.queryengine.b0.dt(Unknown Source) at com.crystaldecisions.reports.queryengine.b0.dD(Unknown Source) at com.crystaldecisions.reports.queryengine.b9.int(Unknown Source) at com.crystaldecisions.reports.queryengine.b9.for(Unknown Source) at com.crystaldecisions.reports.queryengine.b9.int(Unknown Source) at com.crystaldecisions.reports.queryengine.b9.for(Unknown Source) at com.crystaldecisions.reports.queryengine.b9.int(Unknown Source) at com.crystaldecisions.reports.queryengine.b9.case(Unknown Source) at com.crystaldecisions.reports.queryengine.b9.if(Unknown Source) at com.crystaldecisions.reports.queryengine.b9.c(Unknown Source) at com.crystaldecisions.reports.queryengine.b0.d(Unknown Source) at com.crystaldecisions.reports.queryengine.b0.dt(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.l.a(Unknown Source) at com.crystaldecisions.reports.dataengine.j.j(Unknown Source) at com.crystaldecisions.reports.dataengine.j.i(Unknown Source) at com.crystaldecisions.reports.dataengine.j.a7(Unknown Source) at com.crystaldecisions.reports.dataengine.j.a9(Unknown Source) at com.crystaldecisions.reports.dataengine.j.char(Unknown Source) at com.crystaldecisions.reports.dataengine.n.a(Unknown Source) at com.crystaldecisions.reports.dataengine.a5.a(Unknown Source) at com.crystaldecisions.reports.dataengine.a5.Z(Unknown Source) at com.crystaldecisions.reports.dataengine.a5.<init>(Unknown Source) at com.crystaldecisions.reports.dataengine.a5.<init>(Unknown Source) at com.crystaldecisions.reports.dataengine.a5.<init>(Unknown Source) at com.crystaldecisions.reports.dataengine.a5.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bn.<init>(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bn.if(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.d.k.<init>(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.d.o.<init>(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.d.o.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.g.if(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.g.do(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.getPage(Unknown Source) at com.businessobjects.crystalreports.viewer.core.rs.b.if(Unknown Source) at com.businessobjects.crystalreports.viewer.core.aw.a(Unknown Source) at com.businessobjects.crystalreports.viewer.core.aw.run(Unknown Source) at java.lang.Thread.run(Thread.java:619)Sorry, but you have to define "viewer just crashed". To different people this means different things; error, viewer never shows up, application terminates, etc., etc., etc....
If the issue is only 10% of computers then it is not
Re. "...could be caused by:"
- previous installation of CR8.5 (or earlier) runtime (how to cleanup it correctly?)
possibly - see below
- OS configuration (what we need to ajust?)
probably not - as long as it's the same OS and SPs
- something missing in our code (but why it works in 90% cases?)
-no
- something wrong with CRXI runtime (but we a using latest available MSMs, and again, this works in 90% ...)
possibly see below.
I would approach the issue by running [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] and comparing the dlls loading on a computer that works and one that "crashes"...
Your second utility is [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] but ProcMon creates large and difficult to read files.
Oh, and get the powers that be to start to consider moving away from this legacy "stuff". Like I said, PE APIs have been gone since version 9 of CR and RDC has been retired in CR XI R2 (11.5). Neither product is supported anymore.
- Ludek -
Assertion failed: 0, file ../lnk/exthrow.cc, line 425 Abort (core dumped)
Hi,
I have a JNI native library that calls a custom C++ shared library with a number of number of dependencies. At runtime, in the process of loading the custom C++ library, I got the folloing message.
Assertion failed: 0, file ../lnk/exthrow.cc, line 425
Abort (core dumped)
If I did mdb on core dump, the following is the result.
mdb java.29922
mdb: core file data for mapping at ffb7a000 not saved: Bad address
Loading modules: [ libc.so.1 libuutil.so.1 ld.so.1 ]
$Cffbf7c90 libc.so.1`_lwp_kill+8(6, 0, ff2f2e10, ff2a8bd0, ffffffff, 6)
ffbf7cf0 libc.so.1`abort+0x110(ffbf7de0, 1, 0, ad314, ff2f12d8, 0)
ffbf7d80 libc.so.1`_assert+0x64(ff1d9358, ff1d935a, 1a9, ff1ea810, ad030, ff1d418c)
ffbf7fe0 libCrun.so.1`__1cG__CrunMex_rethrow_q6F_v_+0xf0(0, fffb, 0, 14c14, 2, 0)
ffbf8040 libtssclt.so.3`__1cDstdNbasic_istream4Ccn0ALchar_traits4Cc___2t6Mn0AIios_baseJEmptyCtor__v_+0xb8(eef09710, 0,
eef0df94, eef0a088, eef09730, eef09748)
ffbf80a0 libtssclt.so.3`__SLIP.INIT_A+0x20(0, ff2f3700, acb18, ff2bb774, f0bd4840, f0bd4880)
ffbf8100 libtssclt.so.3`__1cU__STATIC_CONSTRUCTOR6F_v_+4(ee774a48, ff2f3700, acb18, ff1d6e50, f0bd3b40, f0bd3b80)
ffbf8160 libtssclt.so.3`_init+0x110(ff3f40fc, ff3f5a50, 2b414, 0, ff3f4910, 821)
ffbf81c0 ld.so.1`call_init+0x16c(c10081, 1, fe9d0f60, ee7c5eb4, ff3f4910, ffdfffff)
ffbf8228 ld.so.1`dlmopen_intn+0x164(ff3f40fc, 10000, c01, 24, 3b, ff161f30)
ffbf8288 ld.so.1`dlmopen_check+0x160(ff3f40fc, 10c5c8, c01, ff3914f8, ffbf834c, 0)
ffbf82e8 ld.so.1`dlopen+0x30(10c5c8, 1, 1, ff185fac, 57c0, ff185fa8)
ffbf8350 libjvm.so`__1cCosIdll_load6Fpkcpci_pv_+0x20(10c5c8, ffbf8858, 400, 0, 12eed4, 5400)
ffbf83f0 libjvm.so`JVM_LoadLibrary+0x15c(10c5c8, 64fc, 38810, ff18696c, ff185fac, 2)
ffbf8c58 libjava.so`Java_java_lang_ClassLoader_00024NativeLibrary_load+0xe8(388cc, ffbf8f2c, ffbf8f28, 0, 10c5c8, 0)
ffbf8dc0 0xf900bc20(11, ffbf8f2c, ffbf8ea8, ffffff80, 64fc, 0)
ffbf8e40 0xf900bbc4(f0c303c0, b6, 0, 8, 1ffc, ffbf8ec0)
ffbf8ec0 0xf9005764(f0c30080, b8, f0c09478, f9014760, f0c374a8, ffbf8f90)
ffbf8f58 0xf90057a8(0, b8, ffbf911c, f9014a20, 110, ffbf9028)
ffbf9018 0xf9005764(f0c08de8, b6, ffbf919c, f9014a68, 57c0, ffbf90c0)
ffbf90b8 0xf9005764(339b8, 0, 64fc, f9014760, ff185fac, ffbf9140)
ffbf9140 0xf9005764(c000, 2, 4c00, f9014a70, ff17fca0, ffbf91b8)
ffbf91b8 0xf9000218(ffbf92a0, ffbf9380, a, f4d5f2f8, f900a7e0, ffbf9390)
ffbf9218 libjvm.so`__1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_+0x5b8(
ffbf9378, 38810, ffbf938c, ffbf92b0, 38eb8, 0)
ffbf92e0 libjvm.so`__1cNinstanceKlassPinitialize_impl6FnTinstanceKlassHandle_pnGThread__v_+0x68c(ffbf9524, 38810, f4d5f330,
391cc, 38eb8, 38eb4)
ffbf94c0 libjvm.so`__1cNinstanceKlassKinitialize6MpnGThread__v_+0x80(38e20, 38810, fecd7a8c, f4d5f330, 38810, ff181fbc)
ffbf9540 libjvm.so`__1cbCfind_class_from_class_loader6FpnHJNIEnv__nMsymbolHandle_CnGHandle_3CpnGThread__pnH_jclass__+0xd8(
388cc, 1, 1, 38e18, f4d5f330, 1)
ffbf95b0 libjvm.so`jni_FindClass+0x720(388cc, 0, 0, ff18696c, 391cc, 0)
ffbf9640 main+0xe3c(6, 388cc, ff182ba0, 39348, 0, 1)
ffbf9ed0 _start+0x108(0, 0, 0, 0, 0, 0)
Any help/assistance on this issue would be highly appriciated.
Thanks and Regards
SomeshI ran into this exact same problem (on Solaris, JVM 1.4.1). Although I don't know the exact cause, I can tell you what I did to fix it..
Of course, this happens when you try to load a native library (a .so in this case). I ldd'd that .so, and found that it in turn was linked to two other libraries in my control, and some other OS libraries.
When I statically linked either one of my libraries, such that only one of the libraries under my control was still linked dynamically, leaving the OS libaries untouched, then the problem went away. Note that it didn't matter which one I linked statically- as long as one (or both) were static there was no problem.
My guess was that there were some sort of cyclic dependencies with these libraries, but right now I'm happy enough that it works, so I'm not going to try and pursue this further.. -
Lightroom 4 - "assertion Failed" error after install
I recently upgraded from 3.6 to 4. Previously, I attempted to install Lightoom 4 beta and tried to open a 3.6 catalog. When it did not work, I simply uninstalled that Lightroom 4 beta.
Now, when I installed Lightroom 4(Upgrade version), installation was uneventful. However, I cannot open the program without crashing. The error message is "assertion failed" Additional detail on the error shows the following.
Problem signature:
Problem Event Name: APPCRASH
Application Name: lightroom.exe
Application Version: 4.0.0.10
Application Timestamp: 4f45ddd8
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.17725
Fault Module Timestamp: 4ec4aa8e
Exception Code: c015000f
Exception Offset: 000000000006fd5c
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
I assume this has something to do with remnants of my previous Lightroom 4 beta installation(which was subsequently uninstalled prior to full Lightroom 4 installation). Does anyone know where the catalog resides by default and whether I can fix this problem by deleting/renaming the catalog(if that is what the problem is).
ThanksOk it is fixed now. Locating the Lightroom 3 catalog file and opening it in Lightroom 4 ( right click and choose program...) prompted me to upgrade the catalog. This fixed the issue
Maybe you are looking for
-
JSF Converter how to use property in faces-config
I have made an Converter for my listbox, and it is working. Now I want to use a property to change the behavior of the converter. My faces-config looks like this: <!-- Converters --> <converter> <converter-for class>model.PacemakerBranche</conve
-
PDF workflow : pre-press preparations in Illustrator interfere : Suggestions?
Our packaging graphics group adopted a PDF workflow which has eliminated the clutter common of art file submissions. However, one print provider must preform additional preparations to the artwork, inserting supplier insignia and adding special press
-
So i just updated my macbook pro ,15" late 2013 with 8gb of ram, to 10.9.3 and my first problem was as soon as the download is over my mac is frozen, so i had to shut it down manually then after 15 min of using it, a new tab shows up and says no more
-
CR2011 - Check for updates option
Hello, I remember reading a few weeks ago that there was an update for CR2011. I selected the check for updates option on the help menu. I saw a dialog box that said that there were no updates. Is the menu option working? Thank you Tracy Q18
-
Starts in Open Firmware. No OS
Short story, When I turn on the Pismo, I get open firmware. I beleive the Hard Drive was formatted, and maybe partitioned eternally through a PC program called Macdrive. I have the software Restore Disc, and the software Install Disc. Neither will bo