"Assertion failed" error when executing a simple UCI program

I am using a simple UCI program (tt1.c) with Xmath version 7.0.1 on Sloaris 2.8 that performs the followings:
- Start Xmath701
- Sleep 10 Seconds
- Load a sysbuild model
- Stop Xmath
I am calling the uci executable using the following command:
> /usr/local/apps/matrixx-7.0.1/bin/xmath -call tt1 &
In this way everything works fine and the following printouts from the program are produced.
--------- uci printout ----------
## Starting Xmath 701
## sleep 10 seconds
## load "case_h_cs_ds.xmd";
## Stopping Xmath 701
All the processes (tt1, XMATH, xmath_mon, and sysbld) terminate correctly.
The problem occurs if the 10 second wait after starting xmath is omitted:
- Start Xmath701
- Load a sysbuild model
- Stop Xmath
This results to the following printouts:
--------- uci printout ----------
## Starting Xmath 701
## load "case_h_cs_ds.xmd";
Assertion failed: file "/vob1/xm/ipc/ipc.cxx", line 420 errno 0.
Note that the last line is not produced by the uci program and the tt1 did not
finish (the printout before stopping xmath "## Stopping Xmath 701" was
not produced).
A call to the unix "ps -ef" utility shows that none of the related process has been terminated:
fs085312 27631 20243 0 10:45:29 pts/27 0:00 tt1
fs085312 27643 1 0 10:45:30 ? 0:00 /usr/local/apps/matrixx-7.0.1/solaris_mx_70.1/xmath/bin/xmath_mon /usr/local/app
fs085312 27641 27631 0 10:45:30 ? 0:01 /usr/local/apps/matrixx-7.0.1/solaris_mx_70.1/xmath/bin/XMATH 142606339, 0x8800
fs085312 25473 25446 0 10:45:33 ? 0:01 sysbld ++ 19 4 7 6 5 8 9 0 25446 ++
The questions are as follows:
1- What is "Assertion failed: file "/vob1/xm/ipc/ipc.cxx", line 420 errno 0" and why is that produced?
2- Should the UCI program waits for end of sysbld initialization before issuing commands?
3- If the answer to the above question is yes, is there a way to check the termination of sysbld initialization?
Thanks in advance for you help.
Attachments:
tt1.c ‏1 KB

I tracked down the problem and it is a race condition between the many processes being started up. A smaller delay should also solve the problem. Or, maybe do something else before the first 'load'. The 'load' command tries to launch systembuild and causes the race condition.

Similar Messages

Getting ASSERTION failed error while executing RSPC1

Hi Experts,
I have created a chain and when I am trying to open in rspc1 I am getting a prompt which states"Node key does not exist".
After executing the prompt I get a dump stating "Assertion condition was violated" .
source code extract--
METHOD SELECT_NODES.
DATA:   l_nodekey        TYPE tm_nodekey,
          l_t_node_key    TYPE treemnotab.
IF NOT i_t_nodeid IS INITIAL.
    LOOP AT i_t_nodeid INTO l_nodekey.
      APPEND l_nodekey TO l_t_node_key.
    ENDLOOP.
    o_r_tree_control->select_nodes(
    EXPORTING
      node_key_table               = l_t_node_key
    EXCEPTIONS
      multiple_node_selection_only = 1
      error_in_node_key_table      = 2
      OTHERS                       = 3
>>>   ASSERT sy-subrc = 0.
ENDIF.
ENDMETHOD.

Hi ,
This is due to there is some bug in your code.there might be some in the transformation that you are loading.
Check the code you had written in the transformation.
Try to re-activate you transformation and load again....
In whcih SP level you are in ?
Regards
Laxman.

ASSERT failed error when connect room closed?

Anyone more that have experienced this error message when closing a meeting room - and have a solution?

As a copy of this query has been posted to the CR design forum at 11:21, assuming this is indeed a design question.
Thus setting this thread as answered.
- Ludek

'ORA-00900 3D' error when executing oci from cgi program

I get the ORA-00900 error with the explanation "3D" whenever I try to join tables from my web querying interface.
I built a web page that allows me to query my oracle database through an OCI program.
Before, I had trouble accessing the database. After I posted a question on this website however, the problem was solved (I simply had to 'setenv' so the OCI program can inherit the env variables).
This time, I am sure it is an env. variable problem again as the program works just fine from the command prompt.
The problem is..WHICH environment variable. I have included all the env variable in the .bash_profile file in the cgi program and still it doesn't work.
Anybody knows why?

I solved the problem though I'm embarrased to admit. The error was due to the query statement structure.
I also decoded the statement (those not familiar with cgi might not know what I'm talking about)
The undecoded string was what really caused the problem.

Error when executing external workflow process

OWB 9.2 with server on Windows NT.
I can successfully execute a mapping workflow process from the deployment manager, but I get an error when executing a simple external process:
command: move
parameters: ?c:\\data\\owbtest\\src.txt?c:\\data\\owbtest\\trg.txt
Resulting output:
Create Process: move c:\data\owbtest\src.txt c:\data\owbtest\trg.txt error=2
File c:\data\owbtest\src.txt exists.
My questions:
1. What am I doing wrong?
2. What does error=2 mean? Is this a Windows error?
3. Do I have to configure some location for the process? What does 'use default location' mean for the configuration property Working Location? Is a host-logon performed before the host-command is executed?
4. Is there logging available for an external process? In the workflow tables or views?
5. I can't find much documentation for these questions. Is there more documentation than the OWB user guide and the OWF guide?
Jaap.

It seems that commands that are not an executable in some directory, but are part of the Windows kernel (like 'move'), need to be started as a parameter of the cmd command. I did this and now it works fine.

Why do I get 'ResolveManifestFiles task failed' error when building a WPF app that references WinRT API?

0
down vote
favorite
I am working on a WPF app that I want to create for Windows 8. I followed steps mentioned in
Hansleman's blog to make some manual modifications using WinRT functions in a WPF app. Everything worked well, until I tried to publish the app. When I clicked on publishing the app I got error "The 'ResolveManifestFiles' task failed unexpectedly.
System.ArgumentException: Value does not fall within the expected range."
Afterwards, it will produce the same error when attempting a simple solution build.
Even if you create a simple WPF project and add the references mentioned in blog to access WinRT functions and publish, this issue can be reproduced.
I think it would be common scenario to call WinRT functions from WPF and someone should have done it. Is anyone aware what should be done to fix this issue?

I am having the same problems and came across this article while researching a workaround.
It is surprising more people aren’t talking about this.
Here are the steps to reproduce the problem; Using Visual Studio Express 2012 (x64) create a new VB Windows Forms Application.
Unload the project and edit the [ProjName].vbproj in the solution explorer.
Add <TargetPlatformVersion>8.0</TargetPlatformVersion> to the <PropertyGroup>.
Save and reload the project. In Add Resource/Reference Manager add the Windows.minmd found under Windows/Core.
This WinRT/Desktop solution will run as expected. Now try to Publish this solution.
It will FAIL with the following ERROR; “The ResolveManifestFiles task failed unexpectedly, Value does not fall within the expected range.”
Attempting to build or run the solution again now will fail with the same Error.
The only way to build the project now is to remove the “Enable ClickOnce security settings” option under the project properties Security settings.
Occasionally using this trick, the solution will build but not run.
When that happens jiggle around with Debug/Release Solution Configurations and the Any CPU/x64 Solution Platforms then rebuild and try the run again.
This fussing around will get you through development however any attempt to publish with restore the ClickOnce security setting and create the previous Error.
The first question here is how do you publish a WinRT app for the desktop with VS2012 Express.
Then secondly, if that is not possible can we publish this Express solution with a 3rd party deployment tool like InstallShield Limited Edition or the WIX Toolset.
Neither however seems functional in a VS Express environment.
Then thirdly, are there ways to access hardware sensor devices from a desktop solution without resorting to the WinRT API.
Any ideas or new research directions would be greatly appreciated.

Webi report throwing error when executed

HI Experts,
While executing a Webi Report we are gettign following error when executing with more than one characteristics -
A Database error occured. The database eror text is : The MDX Query select { [Measures].[4225B1TBMEMOYKZGDKLVINMAW] } ON COLUMNS FROM [ZMEPSC01/ZMEPSC01_QRY_0001]
failed to execute with the error Unknown error.(WIS 10901).
We tried changing the Universe -> Parameter -> Control -> Limit size of result set to -> unchecked it.
But still the error remains. Can u put some light over it.
Thanks.

Hello ,
Just Check with the BI the people they might change the the column name or some thing else in the bex Query that s way It is showing error.
Refresh the universe and generate the report then check it.
Thanks
Santhosh V

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

SQL2005 cluster error MDB-05053 Errors when executing sql command: p nr="

Hi all,
We are migrating from 32 bit to x64 bit machines. SQL 2005 database on windows 2003.
I am trying to install E 4.7-200 SR1 on the clustered nodes. The installation manuals for 4.7 are very old and there is nothing for SQL2005 installation.
Now that some how we were able to have SQL up and running in clustered environment (It only took 10 days), After installing CI, I am not able to deploy the database and database creation phase is failing with the following error:
MDB-05053 Errors when executing sql command: .
I am heavily relying on our server managment team on clustering and hoping they have done a good job, However I need some guidelines which can help me in verifying what they have done is correct and meets SAP and SQL requirments and issues we are facing is actually install problems not cluster.
SAP install manuals are not detailed in this regards. Also manuals are out dataed and they only show the sql 2000 clustering pre-requisit for 4.7 installls.
Can any one with clustering experience please help.
Calling out NPC, As his sql installation and upgrade manual has helped me with stand alone installs, Hoping he has some thing for clustering as well.
Regards,
KG

Hi,
What installation CD/DVD are you using?
Try look at SAP note [924288|https://service.sap.com/sap/support/notes/924288],
and note [969699|https://service.sap.com/sap/support/notes/969699],
and note [967124|https://service.sap.com/sap/support/notes/967124],
and note [106275|https://service.sap.com/sap/support/notes/106275].
In special the last note say at the end:
"3. You must use the 51031444 CD to install Enterprise 4.7 on an x64 platform with SQL Server 2005. This CD installs the central instances and database instances. To convert the A and B nodes in MSCS, use the SAP NetWeaver 04 SR1 installation master CD or DVD."
Hope this helps
Regards
Rolf

Error when executing CPACache mode = full

Hi,
I had error, when executing this CPACache mode = full and delta, I am using this link below:
http://demokl:50100/CPACache/refresh?mode=full.
Full :
Error message =
<?xml version="1.0" encoding="UTF-8" ?>
- <CacheRefreshError>
<EngineType>AE</EngineType>
<EngineName>af.px6.demokl</EngineName>
<RefreshMode>F</RefreshMode>
- <GlobalError>
<Message>Couldn't parse Configuration Data cache update XML string from Directory.</Message>
<Trace>org.xml.sax.SAXException: JavaErrors Tag found in cache update XML. at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataSAXHandler.startElement(DirectoryDataSAXHandler.java:148) at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.startElementEnd(SAXDocHandler.java:146) at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1814) at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440) at
Delta :
<?xml version="1.0" encoding="UTF-8" ?>
- <CacheRefreshError>
<EngineType>AE</EngineType>
<EngineName>af.px6.demokl</EngineName>
<RefreshMode>C</RefreshMode>
- <GlobalError>
<Message>CPA Cache not updated with directory data.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Couldn't open Directory URL (http://demokl:50100/dir/hmi_cache_refresh_service/ext?method=CacheRefresh&mode=C&consumer=af.px6.demokl), due to: HTTP 503: Service Unavailable at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDataFromDirectory(DirectoryAccess.java:382) at
</Trace>
</GlobalError>
- <GlobalError>
<Message>Confirmation handling failed.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Couldn't send confirmation, due to: Couldn't access Confirmation URL, due to: HTTP 503: Service Unavailable at
Thank you and Regards
Fernand

Hi,
I already using user PIDIRUSER to execute CPACache full mode, but still unsuccessfull.
Hi Srinivas,
Which parameter that you mention, i couldn't find in the SXMB_ADM Integration Configuration ?
Thank you and Regards
Fernand

FJS-00012 Error when executing script.

Folks, please i need help, i'm installing sap on oracle 9.2
SYSID CBT, this is SAP 4.71. It stops on the "creating or registering SAP Services (post processing)" phase, and inside the file SAPSTARTSRV.EXE.log it's just the word SERVICE NOT STARTED.
here is the error message
==========
Creating file K:\usr\sap\trans\bin\tpparam_instCBT.
PHASE 2011-03-14 18:41:36
Deal with services
PHASE 2011-03-14 18:41:36
Prepare dealing with SAP System services
INFO 2011-03-14 18:41:36
Creating file S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log.
INFO 2011-03-14 18:41:48
See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log'.
ERROR 2011-03-14 18:41:48
MOS-01012 PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
ERROR 2011-03-14 18:41:48
FJS-00012 Error when executing script.
INFO 2011-03-14 18:42:05
Creating file S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log.
INFO 2011-03-14 18:42:52
See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log'.
ERROR 2011-03-14 18:42:52
MOS-01012 PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
ERROR 2011-03-14 18:42:52
FJS-00012 Error when executing script.
INFO 2011-03-14 18:48:37
Creating file S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log.
INFO 2011-03-14 18:48:44
See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log'.
ERROR 2011-03-14 18:48:44
MOS-01012 PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
ERROR 2011-03-14 18:48:44
FJS-00012 Error when executing script.
=============
what can i do?
cheers.

Hi, i installed the vcredist_x86 patch but nothing happened. I'm running a windows 2000 advanced server on a virtual machine with 3 GB of RAM and a lot of space.
When i tried to start the services manually from service.exe it shows me the on windows eventviewer:
Initialization failed. Service not started. [ntservmain.cpp 1002]
and then
The dynamic link library librfc32.dll could not be loaded
And here is the message from the sapinst
***** Transaction begin ********************************************************
TRACE
Processing Row[0] WapsSystemName="CBT" WapsInstanceName="DVEBMGS00" WapsInstanceHost="SNGCBT1" Key="WAPS_SAPsidInstNum_Service" Program="K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE" ProgramArguments="-r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS00_SNGCBT1 -s CBT -n 00 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm" ArgumentSeparator=" " ProgramReturnCode="255"
TRACE
Copying file S:/SAPinst_ORACLE_SAPINST/SAPSTARTSRV.EXE.log to: S:/SAPinst_ORACLE_SAPINST/SAPSTARTSRV.EXE.12.log.
TRACE
Creating file S:\SAPinst_ORACLE_SAPINST\SAPSTARTSRV.EXE.12.log.
TRACE
Removing file S:/SAPinst_ORACLE_SAPINST/SAPSTARTSRV.EXE.log.
INFO 2011-03-15 14:47:21
Creating file S:\SAPinst_ORACLE_SAPINST\SAPSTARTSRV.EXE.log.
INFO 2011-03-15 14:47:29
See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS00_SNGCBT1 -s CBT -n 00 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst_ORACLE_SAPINST\SAPSTARTSRV.EXE.log'.
TRACE
ProgramReturnCode='-1' means error.
ERROR 2011-03-15 14:47:29
MOS-01012 PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS00_SNGCBT1 -s CBT -n 00 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
***** Transaction end **********************************************************
So Please can someone help me.
regards

Error when executing Java code, java.lang.NoClassFoundError:

Hi, I am new learner in Java Programming and I am using J2SDK and notepad to write a code. I don't have problem in compiling using javac filename, however I received an error when executing using java filename.
The error message I got is Exception in thread "main" java.lang.NoClassDefFoundError: Hello/jawa.
I have verified this simple code - Hello has no issue but somehow it does not run. I even try to compile and execute in other computer also the similiar error returned.
My Client Platform is Windows XP Professional.
I would appreciate any expert can help to suggest me the knowledge/solution to fix this kind of error. Thanks
Jackie

It looks like you entered the command "java Hello.java" or "java Hello/java" (I assumed 'jawa' was a typo.)
You should have entered "java Hello" if your class name is Hello. I am guessing that Hello.java is probably the source code file name. The argument to the java command is the fully qualified class name. "java Hello.java" tells the java command to look for a class named java that is in the Hello package.

Unknown error when executing MDX when refreshing Crystal Report with BEx

Hello Experts,
I have created a Crystal Report (Crystal 2008 SP1) with BEx Query (7.10) and have been able to refresh successfully when the SAP_ALL authorization is included in my user role. I don't want my end users to have SAP_ALL so I created a role and assigned the authorizations recommended in the SAP Integration Kit for BusinessObjects 3.1 Install Guide.
When I run the report as one of the users assigned to my new role I get the following error in the trace file.
ERROR: .\crdb_bwmdx_execution.cpp [200]: l_bapiGetStreamInfo failed with return code RFC_RC = 0 Exception: BAPI Error: BAPI Error #:0
Unknown error when executing MDX
2188     6556     Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
2188     6556     Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
2188     6556     Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
I tried all the Fix Packs (ie 1.1., 1.2 and 1.3) for XI 3.1 Integration Kit to try resolving the error but it didn't work.
The same query works fine in BEx Web when running as one of the users in the new role I created for Crystal Report users.
Are there any other Authorizations that I need to include in the role?
Cheers.
Paul.

We have been able to identify what causes the MDX driver to error and I will explain what we are trying to implement with the hierarchies.
Firstly, we are creating reports of the HR cube Mutliprovider using the SAP MDX Driver which works well when there are no authorization analysis set on the cube. But with the authorization analysis set for on 0ORGUNIT for BEx Explorer Crystal returns the MDX error.
Each of the Business Unit managers are assigned to an Organization Unit that will be used to restrict the employees that will be reported. To restrict the Managers to only see their Org Unit we have set the 0ORGUNIT object to use authorization ananlysis and a custom authorization variable to return only data for the Org Unit they belong too.
In Crystal this works well when a manager has an Org Unit that is a head department of other Org Units. This scenario will give Crystal the NodeID and Parent NodeID to create the hierarchies in the report. But when a manager does not have any other Org Units beneath there own department then Crystal doesn't have a Parent NodeID to create the Hierarchies with the NodeID. In the RFC trace I can see an error when Crystal is trying to get the Parent NodeID but the user is not authorized to that Org Unit then it throws the error.
We have got a temporary workaround which is to create the managers a dummy Org Unit below their own department. The workaround will do for now but shouldn't the MDX driver be able to recognise that it has returned the last level in the Org Unit Hierarchy and not return an error?
The customer is looking for a product fix as they believe this should be handled by the driver. Is this a bug or a limitation of the product?
Paul.

Error when executing query without passing variable selection

Hi Gurus
I am getting an error while executing a query with out passing values for variables
When executing the query by passing the filter values report returns the data
When executing the query with out passing variable selections the error message is
Unknown error in SQL interface
Error reading the data of Info Provider ZCRM_O08
Error while reading data; navigation possible
System error in program SSAPLRS_EXCEPTION and form
RS_EXCEPTION_TO_MESSAGE
No Data Available
can any one please help me in resolving this
Thank you

Hi Srini
Thanks for your quick response
When i am executing the query with selection it is returning the data
giving error when executing with out passing the selection
is there any other cause for this problem
like any particular info object causes this sort of problem
Thank you

Error when executing a .irpt page

Hi,
I am getting the below error when executing a .irpt from the workbench. I am on MII 12.2.2 Build (235).
404 Not Found
SAP NetWeaver Application Server 7.20 / AS Java 7.30
Error: S:usrsapALXJ10j2eeclusterappssap.comxappsxmiiearservlet_jspXMII
oot/XMII/CM/<Project>/<File.irpt>
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jstsg/home
Details: No details available.
Please share your thoughts on this.
Regards,
Chanti.

Hi Chanti,
This sounds obvious, but check to make sure your irpt page has the extension .irpt in the workbench. Depending on how you saved it, it might have been dropped.
Also make sure the page is published by either saving it to web:// (not db://) or by right clicking and selecting Publish.
Regards,
Mike

"Assertion failed" error when executing a simple UCI program

Similar Messages

Maybe you are looking for