E-Business Suites and Kernel Hugemem

Hi,
i've just read the good puschitz paper, tuning linux for oracle:
http://www.puschitz.com/TuningLinuxForOracle.shtml
i've 7 server with RH4 (ES and AS), 4 server with 8Gb and others with 16Gb, i would like to know if i can switch smp kernel with hugemem for optimizing memory allocation. This tips can be apply on E-Business Suites R12 also?
There is someone that use hugemem in EBS? problems detect?
thanks for any info
Andrea

thanks.
However, i can set hugepage :
"vm.lower_zone_protection=100" in the "/etc/sysctl.conf"
right?
and if i cat /proc/memory:
HugePages_Total: 0
HugePages_Free: 0
Hugepagesize: 2048 kB
Hugepagesize should be fine?
thanks again
Message was edited by:
user604991
in accord with Note:401749.1, this parameter having change:
Recommended setting: vm.nr_hugepages = 517
and on 64-bit for best practice, set the memlock user limit to a value larger than the total size of the sga

Similar Messages

What is the difference between E-Business suite and people soft enterprise

hi every one
I want know what is the difference between E-Business suite and people soft enterprise

These are two different ERP systems - the former developed by Oracle and the latter by Peoplesoft (before it was acquired by Oracle).
http://www.oracle.com/us/products/applications/ebusiness/018714.htm
http://www.oracle.com/us/products/applications/peoplesoft-enterprise/018725.htm
HTH
Srini

Reg: Diff between SAP business suite and Business One

Hi Guru,
We are planning to implement SAP in our industry.
Now we are planning to implement SAP Business one. After three years we will bring in complete SAP implementation.
1.Can you please tell the difference between complete SAP Implementation and SAP B1.
2.Could you please explain, if we implement SAP B1 right now. will there be any problem if we go for complete implementation.
3.If the business grows above one billion,will B1 hold good?
4.What is the business suite?
Thanks & Regards,
S.Nehru

Nehru,
thank you for considering SAP solutions.
W regards to question 1 and 4, in short:
SAP Business Suite on traditional relational databases or on HANA is the most extensive SAP set of SAP Business application and includes the SAP applications ERP, CRM, SCM (Supply Chain) SRM (Supplier Relationship) and PLM (Product Lifecycle)
A1 is based on SAP Business Suite and tailored by SAP partners.
B1 is a separate product, so is Business by Design.
All solutions are integrated and used by the largest global enterprises and their subsidiaries as well as by SME small and midsize enterprises, depending on their requirements.
Please see Solution overview of SME solution for more details on A1, B1 and Business by Design.
In addition to the Business Applications, SAP also offers Business Networks Solutions like ARIBA and Concur.
The majority of SAP customers are SME customers: At the end of the third quarter of 2014, SAP has more than 263,000 customers, of which more than 80 percent, or 212,500, are SME's.
Without knowing more details, it would be not professional from my site to provide an answer to your question 2 and 3. Please work with your local SAP partner or SAP Account Executive to validate your approach.
Thank you
erich

How to integrate E-Business Suite and OWB

I want to extract data from an E-business Suite (EBS) database. In the OWB 10.2 userguide is a paragraph, Enabling Integration with Oracle E-business Suite, telling me to import some metadata tables from the EBS-database. But how do I go from there to extracting the application data from the EBS database?
Jaap.

Hi Jaap,
Take a look at the following paper on OTN as to how the EBS connector works in 10.2 (http://www.oracle.com/technology/products/warehouse/pdf/ERP%20Data%20Integration%20with%20OWB.pdf)
In general this works like most import and loads in OWB. You basically read the EBS metadata catalog and then once that information is in OWB, you drag these tables into mappings.
Hope this answers the questions,
JP

Reconcilliation with E-Business Suite and OID using DIP?

I am planning a E-Business Suite (11.5.10) / SSO (IDM 10.1.4.0.1) implementation using AD sync and WNA. On both the AD and E-Business Suite sides there are existing users with account names that do, and do not match. We would like to reconcile these existing accounts as part of the initial load into OID, rather than use the "link on the fly" or "auto link user" capabilities to link users on first login. I cannot see in the documentation how this would be approached using the DIP. Can anyone tell me if this is possible and if so point me in the right direction?

Ryan
You can do this by first loading your existing ActiveDirectory accounts to OID, and then updating the USER_GUID field on FND_USER table with the corresponding orclguid of the user entry on OID.
You can either update this table directly or use the FND_USER_PKG api. There are some notes on Metalink about this but they are intented for when you delete and recreate a user account with the same login. (ex, note 399117.1). But dont expect much help from support if you have trouble.
Also you can expect to have some trouble since there will be some logins only on Oracle Applications and your network admin might creates a new account with a login that already exists on Oracle Applications and is linked to a different login on the network.
Best Regards,
Luis

Oracle E-Business Suite and Active data guard

Hi,
I'm looking to setup current E-business Suite R12.1.3 application without any down time. I've Primary Data Center and Secondary Data Center. I would like to setup seamless failover to another secondary data center in case of 1st data center failure.
Can be this achieved by using Active Data guard? If not what would be best solution? In case of active data guard can I failover site to secondary data center and apply patches on primary site?
I want to acheive 100% availability of application. Any suggestions are welcome!
Thanks

user587327 wrote:
Hi,
I'm looking to setup current E-business Suite R12.1.3 application without any down time. I've Primary Data Center and Secondary Data Center. I would like to setup seamless failover to another secondary data center in case of 1st data center failure.
Can be this achieved by using Active Data guard? If not what would be best solution? In case of active data guard can I failover site to secondary data center and apply patches on primary site?
I want to acheive 100% availability of application. Any suggestions are welcome!
ThanksPlease refer to these docs.
Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1]
Using Active Data Guard Reporting with Oracle E-Business Suite Release 12.1 and Oracle Database 11g [ID 1070491.1]
Oracle E-Business Suite Release 12 High Availability Documentation Roadmap [ID 1072636.1]
Thanks,
Hussein

Report Builder Question: Printing PO's from E-Business Suite - POXPRPOL

I'm hoping there's someone who has the time to help me: We are using Report Builder 9, Oracle 9i, and E-Business Suite 11.5.10.
I am a new developer using Oracle, and need to make some changes to the seeded (default) POXPRPOL (Purchase Order Print - Landscape) report, using Report Builder.
I have two problems:
1. When I print PO Releases from E-Business Suite, and specify I want releases 1 through 2, I get those fine, but the first page is my "Purchase Agreement". The question is: Is there any way (programatically or otherwise) to say "When the "Release" fields are filled out, don't include the Purchase Agreement?
2. Somehow, after making a few changes to the POXPRPOL report, my quantity has disappeared. Is there any suggestions on how this could happen? I look at the query where they are using "POL.QUANTITY_TO_PRINT" for the working and the non-working reports, and they look identical.
I'm hoping DESPERATELY that someone can help me - I'm really in a bind...
Thanks!
Steve

Srini,
Thanks so much for your reply!!!
1. Ok, but how do I hide a whole page? I noticed the conditional formatting, but I want to "not print" a whole page when this page is a "Purchase Agreement".
2. I've checked the source - it's coming from POL.QUANTITY_TO_PRINT - POL is a view that is unpopulated. I assume it's populated at run-time. So now I am trying to track down where it's populated, but can't find that in report builder. The quantity is being taken into account, because I put a total at the bottom of the page, and that number matches price * pol.quantity_to_print. Very strange...
Finally, here's another question, if you don't mind:
3. When I print a purchase order that is set up as a blanket, as I mentioned before, I get my "Purchase Agreement" first, and then one (or more) pages per release. But the "Page Number" on each is "1" because each is a one-page PO. But my "total pages" is "3", so each page reads "Page 1 of 3". Any idea if there's a way around that?
Thanks again! Hoping you have some more insight! :)
Cheers!
Steve

Has anybody used JDev 10g to write an extension to 11i e-business suite?

We are looking to develop an application that can be called from within the menu structure of the 11i e-business suite and would like to use JDeveloper 10g.
I have read that the OA Extension for JDev 9 can be used for this, but I've also read that this OA extension has been replaced by ADF in 10g. Can we use ADF to obtain values such as user_id, responsibility_id, org_id from 11i?
Failing that, seeing as this is the only information from 11i that we will need in the new application, can we just pass these values in as parameters when initially calling the application?
Any help would be greatly appreciated as we cannot find ANY documentation detailing how to link ADF into 11i.

Just to clarify OAF is not ADF.
e-Business is based on OAF right now, and the fusion generation of Applications will be based on ADF.
While OAF uses UIX and BC4J (an early version of ADF BC) it is not the same as ADF.
If you want to use OAF you better ask the question on the OAF forum on OTN.
for ADF development you should use JDeveloper 10.1.3. ADF first appeared in JDeveloper 9.0.5 but things had evolved a lot since then.

E-Business Suite - BizTalk Server Integrations

Our organization is implementing BizTalk Server 2010 to facilitate communication with an ERP under development in an Oracle E-Business Suite r12.1 “On Demand” environment. Some of the modules being developed in E-Business Suite include Payroll, Advanced Benefits, Human Resources, and AP. We are seeking information from anyone who has done something like this. In particular, we would like to know more about exposing and consuming web services to accomplish this integration. Our IT Department will be able to develop its own web services and BizTalk applications within our own domain, but we do not have experience with Oracle E-Business Suite. We understand that the Integration Repository/SOA Gateway may be used to expose some APIs but not all of them. We also understand there may be security and other issues with Oracle functionality that BizTalk adapters for E-Business Suite would have no knowledge of. To summarize, we need to know: (1) if integration between E-Business Suite and outside systems using web services and/or BizTalk has been achieved by anyone in this forum, and (2) if so, how the integration was achieved.

I think your concern is due to externally hosted EBS so that you need to find a secure way of integrating your applications hosted in your datacenter with it. The key here is to have a relaibale network infrastructure - either have dedicated network lines between your data center and on demand or have some high quality VPN between them. If you have this in place, you can treat EBS as another of your internal apps and apply the same security standards as your other internal apps if it is also supported by ebs.

Must not use Java 1.7 when using E-Business Suite

This notification is being posted at the request of Oracle Corporation
All E-Business Suite desktop administrators must disable the JRE Auto-Update for their end users immediately to stop it updating to Java 1.7.
URGENT BULLETIN: Disable JRE Auto-Update for All E-Business Suite End-Users.
The following link from my fellow blogger Steve Chan explains more: https://blogs.oracle.com/stevenChan/entry/bulletin_disable_jre_auto_update
To disable automatic updates, you do this in the Java Control Panel using this workflow:
1. From the Windows Start button launch Control Panel
2. Double-click on the Java icon
3. On the Update tab, uncheck the box that says Check for updates automatically.
4. Click the OK button to complete
So why is this required?If you have Auto-Update enabled, your JRE 1.6 version will be updated to JRE 7. This may happen as early as July 3, 2012. This will definitely happen after Sept. 7, 2012, after the release of 1.6.0_35 (6u35).
Oracle Forms is not compatible with JRE 7 yet. JRE 7 has not been certified with Oracle E-Business Suite yet. Oracle E-Business Suite functionality based on Forms -- e.g. Financials -- will stop working if you upgrade to JRE 7.
If you have already upgraded to 1.7 but already have 1.6 you do not need to uninstall 1.7. You can just tell the system which one to use. You do this using this workflow:
1. From the Windows Start button launch Control Panel
2. Double-click on the Java icon
3. On ths Java tab, click the View button
4. Uncheck the Enabled box against 1.7 and check the box against 1.6
5. Click the OK button to complete
There is also a known issue with WebLogic 10.3.6 and JDK 1.7 and you must use JDK 1.6 for that. I will be posting on my blog shortly about this issue.
Seems to me therefore that until further notice, even for Discoverer, but definitely for E-Business Suite that you must stay on Java 1.6.

Hi Jerre
I hear your concern and when I heard about the issues with E-Business Suite and Java 7 I was horrified. After all, we kind of got used to this when Sun and Oracle were separate but now that Oracle own both you would think these problems would have gone away.
I'm not an insider to the problems with E-Business Suite and I urge anyone that is using it to wait for Oracle's solution and /or follow the great blog owned by Steven Chan which is dedicated to EBS. I took another look a few minutes ago and the advice is still the same - to NOT upgrade to Java 7 if you have E-Business Suite you need to roll back to Java 6 and turn off the automatic updates.
As for Discoverer, I have 10g clients whose workstations were automatically upgraded to Java 7 and had their applications fail. I have always advised my clients to turn off automatic updating of Java and keep their client Java at the same level as the server. There were serious issues here in the past but those were when Sun and Oracle were separate. We had compatibility issues when servers were on Java 5 and workstations upgraded to Java 6 and it looks like we may be having the same problems between Java 6 and Java 7.
I tend to notice far fewer problems in corporate environments when IT departments manage the versions of Java on their servers and workstations rather than let it auto upgrade.
It was me who uncovered a bug in 11.1.1.6 where the Java 7 JDK was not working. Since then Oracle issued a Discoverer patch to allow it to work with Java 7 so for users of 11.1.1.6 you should be OK now to go ahead and allow Java to upgrade. Mind you, if the same workstations need to connect to Forms or E-Business Suite the advice given earlier to not upgrade stilll applies - that is unless someone knows otherwise.
Best wishes
Michael

Oracle E-Business Suite access from the Host machine

Hellow,
Please, after installing E-Business Suite and going through Post-configuration details, I would like to get access of my applications portal from the host system.
I have tried several ways of doing that and would not know the steps to follow in order to access the portal directly from the physical host machine.
I took the normal steps as when configuring end users and can ping the virtual machine from the Host system but can't do the same form the virtual machine of the host machine.
I can ping another server and other machines int he same network but not the one on which the virtual machine is installed.
Regards,
N.M
Edited by: user650358 on 17-Feb-2010 07:21

Hi,
I am confused first clear what is hostmachine and what is virtual machine.....
call the machine which will access the application on virtual machine as CLIENT
call the machine which is hosting the virtual machine a VIRTUAL MACHINE HOST
call virtual machine as VIRTUAL MACHINE
You mean I should change my host IP? It has so many applications using that localhost name.Is ther any setting done in the network and have you ever accessed an application installed on Virtual machine from the host machine?>
changing of ip doesnt have any impact if ur applications are using hostname..if they are using ip then there is a issue,Yes i have acces EBIZ installed on virtula machine many times.
And if ur working in a organization then ask ur network admins to check whats the issue..may be some were firewall issue also ..thats why i asked u to chnage ip.
Regards

How to Display Data from Oracle E Business Suite tables in ADF

Hi,
I am new to ADF.
I have a requirement to Create an ADF page for Search Results Screen.
However the result data is from one of the Oracle E Business Suite Tables.
ie I need to create a Screen where user will enter a Purchase Order Number and Click on Button.
The Screen should show details from PO_HEADERS_ALL (from Oracle ERP Database Table) based on the entered PO Number.
Is it possible to implement the same? Can some one guide me how to do it?
Thanks,
Kamath

Hi,
Is there a way where I can create a VO in ADF to which I can insert records dynamically from a source and the Source connects to E Business Suite tables and returns results ie BPEL etc.
http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/bcadvvo.htm#sm0341
Just replace the PLSQL example with your data source
Can ADF invoke SOA which inturn connects to Oracle E Business Suite and fetches the data from Oracle tables and pass it back to ADF? Is it possible
Yes. Just use a WS proxy client to access the SOA entry point (WSDL) and follow the link above
Frank

SOA with E-business suite

Hi,
I want to know something about SOA, and if the same can be integrated with E-biz suite ?
What would be the benefit of this ?
Thx.

Check the following links:
Enabling Adaptive Business Processes: Oracle E-Business Suite and Service-Oriented Architecture
http://www.oracle.com/products/middleware/docs/oracle_ebs_and_soa.pdf
Service-Enable 11i -- Get A Jump On Fusion
http://blogs.oracle.com/schan/2006/07/24
Leveraging Service-Oriented Architecture for E-Business Suite Integration
http://www.oracle.com/technology/products/applications/integration/1147_EBS_and_SOA.ppt
Oracle Applications Integration Cookbook: A Developer's Guide
http://download.oracle.com/otndocs/products/integration/oracle_apps_integration_cookbook.pdf

Basic Questions about Oracle E-Business Suite

I am just now starting to learn about Oracle E-Business Suite.
I am an Oracle DBA, and I want to become an "Oracle Apps DBA".
The following questions pertain to the DATABASE side of E-Business:
*(1)* Is "Oracle E-Business Suite", and "Oracle Applications 11i" the
same product?
*(2)* Is Release 12, the current version of E-Business Suite?
*(3)* What is the Release of E-Business Suite that most Businesses are
currently using?
*(4)* I want to use 1GB of RAM, for the Laptop, that I want to install
E-Business Suite on, and it will be running under Oracle
Enterprise Linux -- Will this type of setup be OK for building a
personal training and learning environment (especially RAM size)?
*(5)* How much disk space do I need, just to do a basic install (no
demo databases)?

Hi,
*(1)* Is "Oracle E-Business Suite", and "Oracle Applications 11i" the
same product?Yes, it even includes R12.
*(2)* Is Release 12, the current version of E-Business Suite?Yes, the most recent versions of R12 are (12.1.1 and 12.1.2).
*(3)* What is the Release of E-Business Suite that most Businesses are
currently using?Depends, some customer still on 11i while other customer managed to upgrade to R12 (or did a fresh installation/implementation of R12).
*(4)* I want to use 1GB of RAM, for the Laptop, that I want to install
E-Business Suite on, and it will be running under Oracle
Enterprise Linux -- Will this type of setup be OK for building a
personal training and learning environment (especially RAM size)?1 GB RAM is not enough, I would suggest you have 4 GB RAM (or more if possible).
*(5)* How much disk space do I need, just to do a basic install (no
demo databases)?This is documented in the installation manual, please refer to it to get the hardware requirements.
Oracle Applications Installation Guide: Using Rapid Install
http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121oaig.pdf
Regards,
Hussein

Oracle Access Manager 11g Basic with E-Business Suite

Hi gurus,
I was just wondering if anyone could tell me if the basic edition of Oracle Access Manager 11g is licensed for use with e-Business Suite 11i as a partner application? Or is it necessary to purchase the full license to use it with EBS?

925237 wrote:
Hi gurus,
I was just wondering if anyone could tell me if the basic edition of Oracle Access Manager 11g is licensed for use with e-Business Suite 11i as a partner application? Or is it necessary to purchase the full license to use it with EBS?You need a license for Oracle Access Manager. However, AccessGate is available at no charge to customers who have already licensed both Oracle E-Business Suite and Oracle Access Manager.
Oracle E-Business Suite AccessGate Release 1.0.2 Now Available
https://blogs.oracle.com/stevenChan/entry/ebs_accessgate_102
Oracle Access Manager 11.1.1.5 Certified with E-Business Suite 12
https://blogs.oracle.com/stevenChan/entry/oracle_access_manager_11_11
Oracle Access Manager 11.1.1.3 Certified with E-Business Suite 12
https://blogs.oracle.com/stevenChan/entry/oracle_access_manager_11_1
Please contact your Oracle sales representative (account manager), he/she is the best one to answer your license questions.
Global Pricing and Licensing
http://www.oracle.com/us/corporate/pricing/index.html
Thanks,
Hussein

E-Business Suites and Kernel Hugemem

Similar Messages

Maybe you are looking for