E-mail event generator errors
We've done many different channels and not had many problems however, we've been
experiencing problems when creating Email event generators that publish on a message
broker channel and there's not a decent example in the documentation.
The errors are listed in the attached file along with the contents of our channel
definition file. The encoding error happens no matter how the e-mail is encoded.
Has anybody seen this error? How was it resolved? An example would be helpful
too!
[email_channel_errors.txt]
Hi Sean,
The channel definition specifies through the ' messageType="xml" ' attribute that
the message body is well-formed xml. Based on this I created an Email Event Generator
that publishes to that channel (I used your channel definition). I sent four types
of messages. Type 1 was a message with no body at all. Type 2 was a message with
a random text body. Type 3 was a message with a malformed xml body. Type 4 was
a message with a proper xml body. The results indicate that the error message
you are seeing is due to a message being published that has no body at all (Type
1 in my test).
Type 1 - message with no message body content: BINGO!
<Mar 24, 2004 10:49:24 PM PST> <Error> <WLI-Core> <BEA-489203> <Error while publishing
message: com.bea.wli.mbconnector.MBConnMDBBase$MBConnectorException: Can't create
process variable: com.bea.wli.mbconnector.MBConnMDBBase$MBConnectorException:
Can't read XML (no root element)>
Type2: Random text body:
"<Mar 24, 2004 10:50:54 PM PST> <Error> <WLI-Core> <BEA-489203> <Error while publishing
message: com.bea.wli.mbconnector.MBConnMDBBase$MBConnectorException: Can't create
process variable: com.bea.xml.XmlException: error: Unexpected element: CDATA>
Type 3: Malformed xml body:
<Mar 24, 2004 10:58:26 PM PST> <Error> <WLI-Core> <BEA-489203> <Error while publ
ishing message: com.bea.wli.mbconnector.MBConnMDBBase$MBConnectorException: Can'
t create process variable: weblogic.xml.stream.XMLStreamException: '>' expected
[?! -- [CDATA[ ] - with nested exception: [weblogic.xml.stream.XMLStreamException:
'>' expected [?! -- [CDATA[ ] - with nested exception: [Error at line:1 col:10
'>' expected [/?! -- [CDATA[ ]]]>
Type 4: well-formed XML message body
...No error message!...
If there actually was a message body please post it and I'll give it a go.
Hope this helps!
Steve Waterhouse
BEA WorldWide Technical Training
"Sean McGillen" <[email protected]> wrote:
>
>
>
We've done many different channels and not had many problems however,
we've been
experiencing problems when creating Email event generators that publish
on a message
broker channel and there's not a decent example in the documentation.
The errors are listed in the attached file along with the contents of
our channel
definition file. The encoding error happens no matter how the e-mail
is encoded.
Has anybody seen this error? How was it resolved? An example would
be helpful
too!
Similar Messages
-
How Configuring Channel to use Mail Event Generator with a "String" Message
Hello,
I would like use a Mail Event Generator to receive String message.
The BEA example is :
<channel name ="SampleEGEmailChannel" messageType="xml" qualifiedMessageType="oagpo:PROCESS_PO_007" qualifiedMetadataType="eg:EmailEventGenerator"/>
How change this example to accept messageType="string" ?
Thanks for your help !!Thank you for your help :-)
In fact I try to use messageType="string" and try to remove the qualifiedMessageType (but to uses Email Generator you must keep qualifiedMetadataType attributes ) and It has not worked.
Why ? Because I haven't restarted the server.
Conclusion: When you have problem, think to restart integration server !! -
Hi,
I am facing a problem in reading the email and its attachments. Basically I get excel attachments from a third party and some message in the body of the mail. I need to read the email body in the jpd ( process ) and archive the attachments of the mail in a location . To achieve this I use the email event generator to archive the attachments and to call a process to read the body of the mail.
Steps I followed -
1. Created a mail account with my name on the mail server.
2. Created a new email event genertor with all the required parameters in WLI console. configurations being
Server Protocol POP3
Channel Name /EmailEventProcess/SampleStringChannel
Hostname ABC.ENERGY.LOCAL
Port Number 25
Username TestSS
Password ********
Attachments Archive
Polling Interval 1 min
Read Limit 10
Post Read Action Archive
Archive Directory C:\Cache
Error Directory C:\Cache
Description
Publish As weblogic
3. created a channel in the project in weblogic workshop -
<channel name ="SampleStringChannel" messageType="string" qualifiedMetadataType="eg:EmailEventGenerator"/>
4. In a process project - took the option
subscribe to a message broker channel and start via an event (through email)..
code :
* @jpd:mb-static-subscription message-metadata="{x1}" channel-name="/EmailEventProcess/SampleStringChannel" message-body="{x0}"
public void subscription(java.lang.String x0, com.bea.wli.eventGenerator.EmailEventGeneratorDocument x1)
//#START: CODE GENERATED - PROTECTED SECTION - you can safely add code above this comment in this method. #//
// input transform
// parameter assignment
this.testString = x0;
this.testEmailEG = x1;
//#END : CODE GENERATED - PROTECTED SECTION - you can safely add code below this comment in this method. #//
I tried printing out the testString , but i get some strange error.. below is the error -
<Jan 22, 2010 12:19:50 PM CET> <Error> <WLI-Core> <BEA-489203> <Error while publishing message: com.bea.wli.mbconnector.email.EmailConnMDB$EmailConnectorException: connect to store failed>
I checked the mail box , when i send test mails , I can see the mails in the inbox..
Can anyone help me to overcome this error /
thanksaccess issues..
-
Email event generator - error publishing emails received from browser
Hi,
Configured an email event generator that listens on a mailbox. The message type is set to string and no filters. All emails sent from outlook is published successfully to message broker channel and the subscribed by a process. Whereas for emails sent from any browser email like yahoo, gmail gives "Null pointer exception - cannot publish message". Anybody have encountered this error?
Also is it possible to configure the email event generator to archive the emails to another folder in the mailbox rather than to a physical directory?
-Manjula.access issues..
-
I'm getting following error in weblogic server log when starting a JMS Event generator
to a foreign JMS(MQ5.3) Queue.
<May 4, 2004 4:44:35 PM PDT> <Warning> <EJB> <BEA-010096> <The Message-Driven
EJ
B: mqQueueEventGen is unable to connect to the JMS destination: WAL1021852D_Test
JMSQueue. Connection failed after 2 attempts. The MDB will attempt to reconnect
every 10 seconds. This log message will repeat every 600 seconds until the condi
tion clears.>
<May 4, 2004 4:44:35 PM PDT> <Warning> <EJB> <BEA-010061> <The Message-Driven
EJ
B: mqQueueEventGen is unable to connect to the JMS destination: WAL1021852D_Test
JMSQueue. The Error was:
[EJB:010112]The Message Driven Bean 'mqQueueEventGen' is transacted, but the pro
vider defined in the EJB is not transacted. Provider should be transacted if onM
essage method in MDB is transacted.>
My WLI8.1.2 is patched with CR131686_812.zip to support event generator for foreign
JMS destinations. The foreign JMS/MQ provider is configured properly. QueueSend/Receive
were tested fine with JMS java code using local JNDI names of foreign JMS objects.
So we know that foreign Queue is active and accessiable from webLogic.
Anyone run into this? Solution?
Thanks,
ScottHi Scott,
I need a transaction from the MDB since I am not using an EJb to pursue the action.
Hence I need to retain the <trans-attribute>Required</trans-attribute> at the
MDB.
Have any answers?
Pradip
"Scott Yen" <[email protected]> wrote:
>
It's resolved.
The MDB automatically created by JMS Event Generator defaults to be deployed
with
“transacted”. That requires the foreign JMS provider to be “XA”.
The deployment descriptor is created as <domain-directory>/WLIJmsEG_<event_gen_name>.jar
e.g. C:\bea812\user_projects\domains\jmsInterop\WLIJmsEG_mqQueueEventGen.jar
Since MQ in the localhost and remote SLUDV18 are not XA-enabled, we had
to manually
change the <container-transaction> section in ejb-jar.xml:
From :
<trans-attribute>Required</trans-attribute>
To:
<trans-attribute>NotSupported</trans-attribute>
"Scott Yen" <[email protected]> wrote:
I'm getting following error in weblogic server log when starting a JMS
Event generator
to a foreign JMS(MQ5.3) Queue.
<May 4, 2004 4:44:35 PM PDT> <Warning> <EJB> <BEA-010096> <The Message-Driven
EJ
B: mqQueueEventGen is unable to connect to the JMS destination: WAL1021852D_Test
JMSQueue. Connection failed after 2 attempts. The MDB will attempt to
reconnect
every 10 seconds. This log message will repeat every 600 seconds until
the condi
tion clears.>
<May 4, 2004 4:44:35 PM PDT> <Warning> <EJB> <BEA-010061> <The Message-Driven
EJ
B: mqQueueEventGen is unable to connect to the JMS destination: WAL1021852D_Test
JMSQueue. The Error was:
[EJB:010112]The Message Driven Bean 'mqQueueEventGen' is transacted,
but the pro
vider defined in the EJB is not transacted. Provider should be transacted
if onM
essage method in MDB is transacted.>
My WLI8.1.2 is patched with CR131686_812.zip to support event generator
for foreign
JMS destinations. The foreign JMS/MQ provider is configured properly.
QueueSend/Receive
were tested fine with JMS java code using local JNDI names of foreign
JMS objects.
So we know that foreign Queue is active and accessiable from webLogic.
Anyone run into this? Solution?
Thanks,
Scott -
Bonjour keeps generating error event 100 in windows 8.1 event viewer. It's there 128 times in a week! What does it mean?
Hey Michael,
That error could be cause by a conflict with the firewall on your computer. Take a look at the articles below to go over some troubleshooting as well as verifying that Bonjour was properly installed on your computer.
iTunes for Windows: Bonjour alert due to firewall, security, or proxy software
http://support.apple.com/en-us/HT203392
How to tell if Bonjour for Windows successfully installed
http://support.apple.com/en-us/HT201776
Take care,
-Norm G. -
Event 10830 errors generated by the AD managent pack.
Hi,
I have recently installed SCOM 2012 R2 in preparation to migrate over from 2007R2.
I have only one agent installed ( a Domain cotroller) and have found the 'One or more Domain controllers may not be replicating' rule is causing Event 10830 error every 15 minutes:
An alert couldn't be inserted to the database. This could have happened because of one of the following reasons:
- Alert is stale. The alert is generated by an MP recently deleted.
- Database connectivity problems or database running out of space.
- Alert received is not valid.
The following details should help to further diagnose:
Details: RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred in database "OperationsManager",
table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated..
How can this be fixed?For error 10830, you can refer below link
http://donald-scom.blogspot.com/2011/11/my-experience-handling-event-id-10830.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali -
RDBMS Event Generator Issue - JDBC Result Set Already Closed
All -
I am having a problem with an RDBMS event generator that has been exposed by our Load Testing. It seems that after the database is under load I get the following exception trace:
<Aug 7, 2007 4:33:06 PM EDT> <Info> <EJB> <BEA-010213> <Message-Driven EJB: PollerMDB_SessionRqt_1186515408009's transaction was rolledback. The transact ion details are: Xid=BEA1-7F8C65474500D80A5B94(218826722),Status=Rolled back. [Reason=weblogic.transaction.internal.AppSetRollbackOnlyException],numRepli esOwedMe=0,numRepliesOwedOthers=0,seconds since begin=0,seconds left=60,XAServerResourceInfo[JMS_Affinity_cgJMSStore_auto_1]=(ServerResourceInfo[JMS_Affi nity_cgJMSStore_auto_1]=(state=rolledback,assigned=wli_int_1),xar=JMS_Affinity_cgJMSStore_auto_1,re-Registered = false),XAServerResourceInfo[ACS.Telcordi a.XA.Pool]=(ServerResourceInfo[ACS.Telcordia.XA.Pool]=(state=rolledback,assigned=wli_int_1),xar=ACS.Telcordia.XA.Pool,re-Registered = false),XAServerReso urceInfo[JMS_Affinity_cgJMSStore_auto_2]=(ServerResourceInfo[JMS_Affinity_cgJMSStore_auto_2]=(state=rolledback,assigned=wli_int_2),xar=null,re-Registered = false),SCInfo[wli_int_domain+wli_int_2]=(state=rolledback),SCInfo[wli_int_domain+wli_int_1]=(state=rolledback),properties=({START_AND_END_THREAD_EQUAL =false}),local properties=({weblogic.jdbc.jta.ACS.Telcordia.XA.Pool=weblogic.jdbc.wrapper.TxInfo@d0b2687}),OwnerTransactionManager=ServerTM[ServerCoordin atorDescriptor=(CoordinatorURL=wli_int_1+128.241.233.85:8101+wli_int_domain+t3+, XAResources={weblogic.jdbc.wrapper.JTSXAResourceImpl, Affinity_cgPool, J MS_Affinity_cgJMSStore_auto_1, ACSDispatcherCP_XA, ACS.Dispatcher.RDBMS.Pool, ACS.Telcordia.XA.Pool},NonXAResources={})],CoordinatorURL=wli_int_1+128.241 .233.85:8101+wli_int_domain+t3+).>
<Aug 7, 2007 4:33:06 PM EDT> <Warning> <EJB> <BEA-010065> <MessageDrivenBean threw an Exception in onMessage(). The exception was:
javax.ejb.EJBException: Error occurred while processing message received by this MDB. This MDB instance will be discarded after cleanup; nested exceptio n is: java.lang.Exception: Error occurred while preparing messages for Publication or while Publishing messages.
javax.ejb.EJBException: Error occurred while processing message received by this MDB. This MDB instance will be discarded after cleanup; nested exception is: java.lang.Exception: Error occurred while preparing messages for Publication or while Publishing messages
java.lang.Exception: Error occurred while preparing messages for Publication or while Publishing messages
at com.bea.wli.mbconnector.rdbms.intrusive.RDBMSIntrusiveQryMDB.fetchUsingResultSet(RDBMSIntrusiveQryMDB.java:561)
at com.bea.wli.mbconnector.rdbms.intrusive.RDBMSIntrusiveQryMDB.onMessage(RDBMSIntrusiveQryMDB.java:310)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:400)
at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:333)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:298)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2698)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2523)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
Caused by: java.sql.SQLException: Result set already closed
at weblogic.jdbc.wrapper.ResultSet.checkResultSet(ResultSet.java:105)
at weblogic.jdbc.wrapper.ResultSet.preInvocationHandler(ResultSet.java:67)
at weblogic.jdbc.wrapper.ResultSet_oracle_jdbc_driver_OracleResultSetImpl.next()Z(Unknown Source)
at com.bea.wli.mbconnector.rdbms.intrusive.RDBMSIntrusiveQryMDB.handleResultSet(RDBMSIntrusiveQryMDB.java:611)
at com.bea.wli.mbconnector.rdbms.intrusive.RDBMSIntrusiveQryMDB.fetchUsingResultSet(RDBMSIntrusiveQryMDB.java:514)
... 8 more
javax.ejb.EJBException: Error occurred while processing message received by this MDB. This MDB instance will be discarded after cleanup; nested exception is: java.lang.Exception: Error occurred while preparing messages for Publication or while Publishing messages
at com.bea.wli.mbconnector.rdbms.intrusive.RDBMSIntrusiveQryMDB.onMessage(RDBMSIntrusiveQryMDB.java:346)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:400)
at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:333)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:298)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2698)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2523)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
>
I have tried several things and had my team do research but we have not been able to find an answer to the problem.
If anyone can offer any insight as to why we might be getting this error it would be greatly appreciated. Thanks!i also have same error during load testing, mainly this error
"Unexpected exception while enlisting XAConnection java.sql.SQLException"
i tried rerunning after increasing connection pool sizes, transaction timeout, but no luck, marginal improvement in performance though
also tried changing the default tracking levl to none, but no luck.
i am with 8.1SP5, how about you ?
do share if you are able to bypass these errors
cheers -
I gets event handler error from the following applescript code if I leave the desktop space where "XLD" is running.
Is there a way to avoid this error and keep running the applescript?
tell application "System Events"
set wnd to front window of application process "XLD"
click button "Extract" of tool bar of wnd
delay 1
repeat while (name of front window of application process "XLD") = "Progress"
end repeat
end tellDo you have any Mail plug-ins installed? Mail Act-on, MailTags or whatever? If so, try disable them and then see if the scripts work.
Alternatively, you can access the iPhoto Library from within Mail:
Uploaded with plasq's Skitch!
Just drag and drop to the message.
Regards
TD -
Hi there
I'm running WL Platform 8.1 SP4. I am using the timer event generator to fire requests to a channel/process. The timer is simply used to start a given process, there is no notion of message sent to it.
Issues
1) When defining a channel,
e.g
<channel name ="XToY" messageType="xml"
qualifiedMetadataType="eg:TimerEventGenerator" />
It seems I must define messageType="xml", if i define it as 'none' then it does not appear in the channel list when defining the timer event generator, therefore i cannot bind to it. So if I leave the messageType as xml, it appears. For the configuration of the timer, the message element is optional. Problem is when the timer now fires it throws the following error:
<08-May-2006 10:25:25 o'clock BST> <Error> <WLI-Core> <BEA-489030> <Error publishing Timer Event message for XToYTimerEG : com.bea.wli.mbconnector.MBConnMDBBase$MBConnectorException: Can't create proc
ess variable: com.bea.wli.mbconnector.MBConnMDBBase$MBConnectorException: Can't read XML (no root element)>
Any ideas?
2) Can someone direct me to any wlst scripts that allow the creation of a timer event generator in a cluster? ?I cannot find anything on dev2dev ?
TIA
ArvinderOk, you can basically leave the messageType as XML
and for the Timer EG configuration, for the optional message you can add <dummy/> this will fire the request and start a workflow or whatever is bound to the channel. -
Edit e-mail alerts generated by task lists
My client wants to customise the e-mail alerts generated to notify users of tasks due or overdue. I would like to know where the default messages are stored.
Thanks
ChrisIn addition
please check the below guide and make sure you have done your configurations as per it.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/be79a16b-0a01-0010-51b8-9b6d1968338d?overridelayout=true
we were having similar issues with CCMS and it was due to missing configurations in client 000 , we had instead done them in client 100,which may result cause some issues and not always trigger alerts.
In Rz20->SAP CCMS Technical Expert Monitors->CCMS SelfMonitoring and GRMG SelfMonitoring will give you more information.
CCMSSelfmonitoring will keep logs of all the errors which happened in CCMS itself,it mails are not triggered,it will have logs which shows why mails were not triggered.
Thanks
Aamir -
NImax.exe has generated errors. You must restart the program, a log file is
being created.
This error occurs just after bootup, no programs started except windows..
Running Windows 2000 latest version on a brand new computer.
(pent 4 3.0 ghz 500MB ram).
Can anyone help me with this problem? Happened after install Labview 7.0
express. Installed twice and same problem occured with both installs.
Labview 7.0 is the only thing installed right now. Also selected "Visual
Basic Support" install from driver cd's.
One other thing I just noticed. System info reports 2 processors and I
think I only have one.
TIAHappy update.
After ignoring this problem for awhile and installing some NI DAQ boards,
this problem is not happening anymore.
Would urge NI to investigate further though. Messed me up for a couple of
days, and still don't know why it happened.
Much thanks to those who helped.
JJ
"JJF" wrote in message
news:qB6Hb.48702$VB2.90660@attbi_s51...
> One other point, I found out this is a message generated by drwtsn32. Can
> get rid of the error by unchecking "show visual feedback on errors" box,
but
> don't like that fix. Still need help.
>
> Thanks,
>
> JJ
>
> "JJF" wrote in message
> news:%JRGb.138921$8y1.419649@attbi_s52...
> > Hi Nirmal and all,
> >
> > Happy Holidays to you too, and thanks for the reply.
> >
> > Making progress. Did all the uninstalling and registry editing as you
> > suggested. Also, updated Win2K at Microsoft.com as suggested.
> > Re-installed with default settings of LV express 7.0. Now I only get
> the
> > error when I exit NImax.
> >
> > Also, my p2p home network is not that hot. Have it set up as a
workgroup.
> > Sometimes when I boot up I have file access between the two computers
and
> > sometimes windows explorer can't find the workgroup network path
(between
> > the two computers). Both computers can always access the internet
though.
> > Using a 4 port Linksys cable/dsl router on a cable modem. Using XP
home
> > edition on base computer (the one set up for the isp) and Win2K on the
> other
> > computer.
> >
> > Also, any idea where this log file is going? Thought it was part of the
> > event viewer but the errors in the event viewer don't seem to correspond
> to
> > the NImax.exe logging event now. There is a file in
> > "winnt\sytem32\config\software.log" that seems to change at about the
same
> > time but I can't access the file because it is in use by the system.
> >
> > Using NImax ver 3.02.3005. Do you know if I can download "NI
measurement
> > and automation explorer" and/or the driver cd's from NI.com? Maybe I
have
> a
> > flaky disk or something. I have a feeling it may also have to do with
the
> > "on again/off again" network neighborhood connection problem.
> >
> >
> > Thanks again,
> >
> > JJ
> >
> >
> >
> > "Nirmal Sharma" wrote in message
> > news:506500000005000000AE470100-1068850981000@exchange.ni.com...
> > > Hi,
> > > Happy cristmas & new year for you & ur brand new pc...
> > >
> > > How are you uninstalling & then installing LV in your pc ?
> > >
> > > I suggest to remove complete LV (Remove All option) from your
> > > computer. Once uninstallation is completed, go to windows registry -
> > > by windows start -> run -> regedit -> Enter
> > >
> > > Goto HKEY_LOCAL_MACHINE-> SOFTWARE -> National Instruments - Delete
> > > this folder (National Instruments folder)
> > >
> > > Remove any other foloder/file related to NI's software. Be very
> > > cautious while deleting files from windows registry bcoz wrong file
> > > deletion may hang your whole system.
> > >
> > > Restart your computer..hope it should bootup without any errors.
> > >
> > > Now as answered by Alexander, update windows.
> > >
> > > After updating, bootup your system. If it boots up without any error
> > > message, install LV with the typical (default installation).
> > >
> > > Hope this helps. Your feedbacks are welcome.
> > >
> > > Best Regards,
> > > Nirmal Sharma
> > > India
> >
> >
>
> -
Dynamic Event Registration Error
Hi,
I'm getting to grips with Dynamic events in LabVIEW. However, I've encountered an issue i'm not sure on. When I try to register a cluster of control refs to the Register for Events function I get an error.. See Dynamic Event Registration.vi for small vi highlighting the issue.
Thoughts?
Strokes
Attachments:
Dyanmic Event Registration Error.vi 9 KBSteve Chandler wrote:
You can wire a reference or an array of references to register for events. Of course you probably already know that you have to wire the output of register for events to the dynamic registration terminal of the event structure.
Steve Chandler wrote:
You can wire a reference or an array of references to register for events. Of course you probably already know that you have to wire the output of register for events to the dynamic registration terminal of the event structure.
That helped me somewhat, however, I'm still experiencing problems. My events seem to be registering correctly but don't seem to generate when I trigger them. I've configured the event structure to execute should one of the controls in my cluster change value. However, the only event case that get's executed is the timeout case.
I've attached a vi highlighting my problem named Dynamic Event Problem.vi. My real vi is much larger and contains many sub vis so hopefully what I've attached suffices..
Attachments:
Process Data Control Refs Edit.ctl 14 KB
Dynamic Event Problem.vi 22 KB -
Problems with body email using Email Event Generator
Hi I need to start a workflow when an email is received by a email account. In
order to do that, I built a Email Event Generator that uses the next channel:
<?xml version="1.0"?>
<channels xmlns="http://www.bea.com/wli/broker/channelfile"
channelPrefix="/cgr"
xmlns:eg="http://www.bea.com/wli/eventGenerator"
xmlns:dp="http://www.bea.com/wli/control/dynamicProperties"
xmlns:oagpo="http://www.openapplications.org/003_process_po_007">
<channel name ="Rendicion" messageType="none">
<channel name ="RendicionEmail" messageType="xml"
qualifiedMessageType="oagpo:PROCESS_PO_007"
qualifiedMetadataType="eg:EmailEventGenerator"/>
</channel>
</channels>
I'm using "Suscribe to a Message Broker" oprtion to start my work flow. That option
uses two input variables: com.bea.xml.XmlObject and com.bea.wli.eventGenerator.EmailEventGeneratorDocument.
* @jpd:mb-static-subscription message-metadata="{x1}" message-body="{x0}"
channel-name="/cgr/Rendicion/RendicionEmail"
public void subscription(com.bea.xml.XmlObject x0, com.bea.wli.eventGenerator.EmailEventGeneratorDocument
x1)
//#START: CODE GENERATED - PROTECTED SECTION - you can safely add code
above this comment in this method. #//
// input transform
// parameter assignment
this.body = x0;
this.emailXML = x1;
//#END : CODE GENERATED - PROTECTED SECTION - you can safely add code
below this comment in this method. #//
That configuration only functions when the email has plain text body containing
a xml structure. Other waise that error is showed by the server:
<Oct 24, 2003 4:16:26 PM GMT-05:00> <Error> <WLI-Core> <BEA-530203> <Error while
publishing message: com.bea.wli.mbconnector.
MBConnMDBBase$MBConnectorException: Can't create process variable: com.bea.wli.mbconnector.MBConnMDBBase$MBConnectorException
: Can't read XML (no root element)>
<Oct 24, 2003 4:17:26 PM GMT-05:00> <Error> <WLW> <000000> <Error publishing email:
com.bea.wli.mbconnector.MBConnMDBBase$MBC
onnectorException: Can't create process variable: com.bea.xml.XmlException: error:
Unexpected element: TAG_END>
<Oct 24, 2003 4:17:26 PM GMT-05:00> <Error> <WLI-Core> <BEA-530203> <Error while
publishing message: com.bea.wli.mbconnector.
MBConnMDBBase$MBConnectorException: Can't create process variable: com.bea.xml.XmlException:
error: Unexpected element: TAG_E
ND>
Is it a Bug?, or Is the configuration wrong?
Thank you very much
DavidI've got the same issue going on here... I also posted the problem to this newsgroup
earlier today.... please check your log files or server output window to see if
you're also getting the encoding error...
"David Uribe" <[email protected]> wrote:
>
Hi I need to start a workflow when an email is received by a email account.
In
order to do that, I built a Email Event Generator that uses the next
channel:
<?xml version="1.0"?>
<channels xmlns="http://www.bea.com/wli/broker/channelfile"
channelPrefix="/cgr"
xmlns:eg="http://www.bea.com/wli/eventGenerator"
xmlns:dp="http://www.bea.com/wli/control/dynamicProperties"
xmlns:oagpo="http://www.openapplications.org/003_process_po_007">
<channel name ="Rendicion" messageType="none">
<channel name ="RendicionEmail" messageType="xml"
qualifiedMessageType="oagpo:PROCESS_PO_007"
qualifiedMetadataType="eg:EmailEventGenerator"/>
</channel>
</channels>
I'm using "Suscribe to a Message Broker" oprtion to start my work flow.
That option
uses two input variables: com.bea.xml.XmlObject and com.bea.wli.eventGenerator.EmailEventGeneratorDocument.
* @jpd:mb-static-subscription message-metadata="{x1}" message-body="{x0}"
channel-name="/cgr/Rendicion/RendicionEmail"
public void subscription(com.bea.xml.XmlObject x0, com.bea.wli.eventGenerator.EmailEventGeneratorDocument
x1)
//#START: CODE GENERATED - PROTECTED SECTION - you can safely
add code
above this comment in this method. #//
// input transform
// parameter assignment
this.body = x0;
this.emailXML = x1;
//#END : CODE GENERATED - PROTECTED SECTION - you can safely
add code
below this comment in this method. #//
That configuration only functions when the email has plain text body
containing
a xml structure. Other waise that error is showed by the server:
<Oct 24, 2003 4:16:26 PM GMT-05:00> <Error> <WLI-Core> <BEA-530203> <Error
while
publishing message: com.bea.wli.mbconnector.
MBConnMDBBase$MBConnectorException: Can't create process variable: com.bea.wli.mbconnector.MBConnMDBBase$MBConnectorException
: Can't read XML (no root element)>
<Oct 24, 2003 4:17:26 PM GMT-05:00> <Error> <WLW> <000000> <Error publishing
email:
com.bea.wli.mbconnector.MBConnMDBBase$MBC
onnectorException: Can't create process variable: com.bea.xml.XmlException:
error:
Unexpected element: TAG_END>
<Oct 24, 2003 4:17:26 PM GMT-05:00> <Error> <WLI-Core> <BEA-530203> <Error
while
publishing message: com.bea.wli.mbconnector.
MBConnMDBBase$MBConnectorException: Can't create process variable: com.bea.xml.XmlException:
error: Unexpected element: TAG_E
ND>
Is it a Bug?, or Is the configuration wrong?
Thank you very much
David -
Using a Foreign JMS Destination as a JMS Event Generator Subscription
NOTE THIS IS BUMPED UP FROM ROBERT NORTON'S POST. I am having the same
problem here. From the wliconsole, the only queues listed to have events
generated from are local ones.
Hello,
I'm trying to create a workflow that is started by a JMS message queue
event.
I'm trying to use the WLIJMSEventGenTool in WebLogic 8.1 to listen to a
queue
on a remote WebLogic 8.1 installation, publish the incoming messages to
a channel,
then initiate a workflow by subscribing to that channel. Here's a copy
of my configuration
file for the tool:
<message-broker-jms-event-generator-def
source-jndi-name="SearchInputQueue"> <channel
name="/srm/sInput/sInput" /> </message-broker-jms-event-generator-def >
I tried to tackle this by configuring a foreign JMS Server, Connection
Factory,
and Destination using the Weblogic Admin Console. Below are the
parameters I used
to define the remote connection
Foreign JMS Server:
jndi initial context factory: weblogic.jndi.WLInitialContextFactory jndi
connection
url: //OPER1090:7001
Foreign connection factory:
local jndi name: FtsFactory remote jndi name:
weblogic.jws.jms.QueueConnectionFactory
(Are username and password required?)
Foreign JMS Destination:
local jndi name: SearchInputQueue remote jndi name:
InternalSearchInputQueue
After I try to deploy my generated JMS Event jar, I receive the
following error:
<Jun 6, 2003 10:31:50 AM EDT> <Warning> <EJB> <BEA-010061> <The
Message-Driven
E JB: SearchInputQueue-UnorderedMessageListener is unable to connect to
the JMS
de stination: SearchInputQueue. The Error was: [EJB:011010]The JMS
destination
with the JNDI name: SearchInputQueue could not b e found. Please ensure
that the
JNDI name in the weblogic-ejb-jar.xml is correct , and the JMS
destination has
been deployed.>
I'm pretty sure the problem is simply that my syntax is off somewhere in
my configuration.
I found the existing BEA documentation to be a bit too generic,
containing no
specific examples of the proper syntax to use for this task. Can anyone
offer
any advice or better, a working example? Any BEA reps out there?NOTE THIS IS BUMPED UP FROM ROBERT NORTON'S POST. I am having the same
problem here. From the wliconsole, the only queues listed to have events
generated from are local ones.
Hello,
I'm trying to create a workflow that is started by a JMS message queue
event.
I'm trying to use the WLIJMSEventGenTool in WebLogic 8.1 to listen to a
queue
on a remote WebLogic 8.1 installation, publish the incoming messages to
a channel,
then initiate a workflow by subscribing to that channel. Here's a copy
of my configuration
file for the tool:
<message-broker-jms-event-generator-def
source-jndi-name="SearchInputQueue"> <channel
name="/srm/sInput/sInput" /> </message-broker-jms-event-generator-def >
I tried to tackle this by configuring a foreign JMS Server, Connection
Factory,
and Destination using the Weblogic Admin Console. Below are the
parameters I used
to define the remote connection
Foreign JMS Server:
jndi initial context factory: weblogic.jndi.WLInitialContextFactory jndi
connection
url: //OPER1090:7001
Foreign connection factory:
local jndi name: FtsFactory remote jndi name:
weblogic.jws.jms.QueueConnectionFactory
(Are username and password required?)
Foreign JMS Destination:
local jndi name: SearchInputQueue remote jndi name:
InternalSearchInputQueue
After I try to deploy my generated JMS Event jar, I receive the
following error:
<Jun 6, 2003 10:31:50 AM EDT> <Warning> <EJB> <BEA-010061> <The
Message-Driven
E JB: SearchInputQueue-UnorderedMessageListener is unable to connect to
the JMS
de stination: SearchInputQueue. The Error was: [EJB:011010]The JMS
destination
with the JNDI name: SearchInputQueue could not b e found. Please ensure
that the
JNDI name in the weblogic-ejb-jar.xml is correct , and the JMS
destination has
been deployed.>
I'm pretty sure the problem is simply that my syntax is off somewhere in
my configuration.
I found the existing BEA documentation to be a bit too generic,
containing no
specific examples of the proper syntax to use for this task. Can anyone
offer
any advice or better, a working example? Any BEA reps out there?
Maybe you are looking for
-
OBIEE 11g and Essbase and Dimension Filter / Selection Steps
We are doing a prototype using OBI 11g with Essbase 11.1.2 as a datasource. Our prototype consist of several reports, graphs and dashbaords. The Essbase cube is an ASO cube with 12 dimensions. Most of our dimensions are ragged/unbalanced so we have s
-
QuickTime fails to initialize for non-admin users (Error 63441)
I have installed iTunes 6.0.4 (including QuickTime 7.0.4) on my XP PC. iTunes and QuickTime work fine for the Admin users, but not for non-Admin accounts. iTunes crashes with the generic Microsoft 'send error report' message; QuickTime gives "QuickTi
-
None of my Programs will open!
When I open CC on my computer, it shows all the apps I have. When I try to open them the message "Adobe Application Manager, required to stat your trial, is missing or damaged. Please download a new copy of Adobe Application Manager from http://www.
-
Nike Settings Greyed Out on iPhone 4S
I have an iPhone 4S, and I wanted to use my Nike + sensor with it (I've been using a nano up to now). I go into settings, Nike +, and the on/off switch is greyed out, along with all the other settings. The only thing tappable is "Go to Nike +". I sho
-
¿Porqué no puedo ver los archivos RAW en adobe bridge?
Hola, tengo el photoshop CS2, el ACR 3.7 y cuando abro el adobe brige y selecciono un archivo raw no se ve, trabajo con windows XP. si alguien me puede ayudar? Muchas gracias y un saludo,