E-recruiting search results

HI,
We have a custom channel XYZ in E-Recruiting where we are positing some requisitions.
When i do the unregistered serch i am getting the jobs posted through EXTERNAL channel only
My Q? here is..
But I want all the jobs posted through EXTERNAL and XYZ chgannel displayed for Unregistered search
Is this possible? If YES can anybody help me how to do that.. Thanks..

Hello Marco,
There is BAdI HRRCF00_SEARCH_HIDDEN_INFO which you can use to add there as additional hidden information field for example the department ID. Then you can say for the quick search when to show that candidates and in what case others.
Regards
Nicole

Similar Messages

Increasing the Number of Candidate Job Search Results in E-Recruiting

Hello,
Would anyone happen to know where to go to increase the number of candidate candidate job search results in E-Recruiting? It's default value is set as only allowing 10 jobs per page. If you want to display more you have to click the down arrow. How would I allow it to show, say 25, or maybe 50 per page?
Any help you can provide would be appreciated!
Thanks Ryan!

Thank you Sandra for your reply,
I tried the following combinations in table T77RCF_UI_PARAM
Name                           Param.type                            Parameters
hrrcf_unrg_srch             MAX_VISIBLE_ITEMS             25
hrrcf_unrg_srch             VISIBLE_ROWS                     25
hrrcf_unrg_srch             SEARCH_POSTINGS             25
None of which increased the number of hits that appeared on the page. The value still remained at 10 per page.
It would appear that somewhere in the result_list.bsp view for hrrcf_unrg_srch that this is being set. If I view the methods for class CL_HRRCF_UNRG_SRCH_HL_RESULT_V I find three that would appear to be relivent: PREPARE_HITLIST, GET_HITS_PER_PAGE and SHOW_HITLIST. However, I am having trouble tracking down where the default value of 10 hits per page is being set at.
Regards,
Ryan

Restricting views of search results in E-recruiting

Hello Experts,
I have a requirement in my project to restrict the visibility of search results when users run search queries to look for applications. The system should be masking the applications of the user's reporting managers, directors or VPs when they apply for internal job postings or anyone above the hierarchy level in the Org structure. There is no structural authorization provided in TREX search by SAP. I understand that the talent pool is a global talent pool with all internal and external applications, but I need to cater to this requirement somehow.
Any inputs would be of great help!!!
Thanks
Srini.

Hi srini,
i am not really getting the concept of your requirement.
Candidates cannot see other candidates applications. Managers only see the applications forwarded to them so it is no issue to restrict anything as it would be HR task to controll forwarding candidates but still how often does it happen that a hiring managers superior is applying to a job below the manager as managers usually hire subordinates.
So only recruiters are effected. On centralized recruiting organizations recruiters would not be allowed to see applications of hr manager hierarchy - ok might be an issue, while all other departments are no problem. From my experience this is usually handled outside the system exactly because of the problems implicated by that.
In decentralized hr organizations we have a similar situation like in the managers case. the decentalized recruiter is working for an department so he only handles applications for this department. Employees in higher hierachy levels will probably not apply for the job the recruiter is responsible.
Could you please give some more background information on what you exactly try to achieve, this will probably help to answer your question.
Known points in the e-recruiting application I met in my projects were the listed applications in data overviews for the same candidate. Managers should not see that an internal applicant has applied for several other positions over the time so he treats all applicants equally and managers won't start chatting "hey bro, I saw mr. xy already applied in your department last month, you did not hire him, what's wrong with that guy? is he stealing copy paper?". but this can be easily handled by propper data overview design.
Another difficult issue is the candidate overview were a recruiter can see all applications of a candidate. Here the reason is also equal opportunities for all internal candidates. Trouble here is the difficulty that hiding results in the loss of information which prevents internal overbidding (a candidate who has two offers on two applications in the same company using this to push salary offers). This one is tricky and has to be decided very carefully.
But as you see both cases are dealing with applications of the same candidate not a candidate in general.
So please check if you can give some more details on the requrements.
Best regards
Roman

E-Recruiting ( TRM results )

SAP E-Recruiting, the TRM shows a maximum of 500 hits (when there are more)
How to view all possible results?
Thanks in advance

Hello,
There are 2 basic settings to influence the TREX search results:
1. T77S0 RECFA HIHIT
2. BAdI HRRCF00_SEARCH_MAX_HITS
500 is set in T77S0 for RECFA HIHIT where it specifies how high the maximum number of hits can be for all search queries. This setting overwrites the maximum number of hits specified by the user in the general search settings if it is higher than the value specified here. If you remove this, then the system will use 9,999,999 but if you have many values to search from then you will most likely get a time out.
If you would like to understand more about this you better check SAP Notes 1029349 , 899689, and 1002506. These explain the performance issues related to these, how you may enhance or weigh the options available. The most important question to ask is "When would you want to search and get a very long list". The idea with SAP is that define you criteria such that you get a small result with fitting candidates only.
Regards,

Error while adding a 'Ext No' field to Activities Search Result List on UI

Hi Experts,
The requirement is to add a new display field u2018External Nou2019to the activities SEARCH Result list.
At the moment activities are displayed with start date, end date and category, now the user want to display External No as well.
The details for that
Target:
Component:BT126S_APPT
View:bt126s_Appt/ApptSR
Context Node:BTQRACT
New attribute 'EXTERN_ACT_ID' to be added to the context node.
Source: component: BT125H_TASK
View: BT125H_TASK/TaskDetailsOV
ContextNode:BTACTIVITYH
Attribute:Struct.Extern_Act_Id
BOL Relation:
BOL ENTITY: BTQRAct
BOL Attribute: BTADVSAct -> BTOrderHeader -> BTHeaderActivityExt/EXTERN_ACT_ID
When i tried to added the attribute to the context node BTQRACT, it gave me the error 'method CL_BT126S_A_APPTSR_CTXT CREATE_BTQRACT DOES NOT EXIST.
please give me some inputs.
Regards
Krishna

Hi steve,
Still my issue was not resolved, could you help me to find the exact error.I have enhanced the component, view and context node, still i couldn't able to add attributes to the context node BTQRACT.I tried to add several fields, but it is giving the same error 'METHOD CL_BT126S_A_APPTSR_CTXT' CREATE_BTQRACT DOES NOT EXIST'. I have checked the OSS messages and found 2 relavant to this component. I have implemented both the Sap Notes 1363752, 1226612. Still after implementing the OSS note, i am getting the same error.My guess is one of the method is missing. Please help me out?
Regards
Krishna

Podcast No Longer Showing Up on iTunes Search Results

We submitted our podcast months ago and it showed up on the iTunes store just fine. Somewhere along the way, someone on our end introduced a code error in the .xml file that broke the links to the audio files. We didn't find this issue out for quite a while, and in that time, it appears that iTunes flagged and took down our podcast feed from the store (I'm assuming because of this code error).
I have since remedied the code issues and I can subscribe directly to the feed now, so it is working fine. But I cannot get the store to show the podcast in any search results. When I try to resubmit the feed the store says it is already submitted - even if I change the url and the .xml file name, so it is clearly smarter than I am, haha.
Any tips on how to get out of this problem? It has been several weeks and the podcast still does not show up on the store.
Thanks,
Bill

Roger,
Thanks for the reply - in the time it took me to hit submit and tab back to my .xml file I saw that I'd missed changing the link/title. Thank you for confirming that this will do it - it let me resubmit. Take care!
Bill

Sorry, something went wrong - Open Office File from Search Results Page with Office Web Apps

Hi,
I'm getting "Sorry, something went wrong" error when I'm trying to open any office document from inside Search Results Page with Office Web Apps, the same error is appearing in the document preview as well.
The error in SharePoint logs says that the file cannot be found.
Please note that this error is coming only when the "Filename" of the document is not written in English (in my case its written with Arabic characters).
If I try to open it from the document library, its opening properly with no errors.
The only difference between two URLs (document URL in Search Results and in Document Library) is the value for "sourcedoc" attribute;
In the case of Search Results page, the filename in "sourcedoc" attribute is kept as is with Arabic characters.
While in the Document Library, the filename in "sourcedoc" attribute is converted into different characters (something like: "B9%D9%85%D9%8").
Anybody have an idea on how to overcome this issue, implement a workaround or modify the "sourcedoc" behavior?
Thanks in Advance.
Hamza AlSughier

Dear Wendy,
Thanks for your efforts, I already tried your last suggestion before, but this didn't solve my problem.
Actually my end users are accessing this portal using ADFS and HTTPS.
Finally I got this solved, I have done below to get my overall solution working perfectly:
- First I have configured Windows Authentication and ADFS Authentication on the same zone which is the default zone.
- The issue when opening office documents with Arabic file name has disappeared as a result of first change.
- Then I have faced an issue where we are not able to crawl content under Default zone, however we have to do so, after too many efforts, I found that its related to the Load-balancer/proxy, I have made the crawler server
to crawl himself (http://CrawlServerName:PortNumber).
- Also a change on Alternate Access Mapping was needed, I have set one of the extended zones (which is running Windows Authentication only) as Internal URL for the Default Zone, and this is was the URL I used for Crawling.
I have configured Server Name Mappings to make sure we got proper URLs in Search Results.
- Then we faced another issue, which is Authentication selection on login page (How to bypass this page, and authenticate using ADFS auto), I used this solution (Set Custom Sign In Page):
http://0ut0ftheb0x.wordpress.com/2014/01/04/skip-the-authentication-selection-page-at-_logindefault-aspx-in-a-mixed-authentication-environment/.
- I faced one more issue as a result of above workaround; Sign Out functionality wasn't working well; users get logged in automatically whenever I click on Sign Out. I solved this by modifying the "Sign Out" Control under _layouts;
I made it to redirect users to ADFS Sign Out Page instead of SharePoint Sign Out Page (I know its not recommended, but I don't have any other option).
Hamza AlSughier

Why do google search results reset to match the search bar terms when i use the back button?

Since the update to FF 23, the list of Google search results clears and the on-page search box is reset to match the address bar search box when I hit the back button to re-view the results list after checking a result.
To see this issue for yourself, set your search provider to Google and make sure Instant is on. Type a search term into the search bar and press enter. A google page appears with your results list. Now, change your search terms or conduct a new search directly from the google page (without using the FF search bar). Click on the first result in the search list, then click the back button to return to the search results so you can check a differest result. As FF goes back to the google page, it will reset the on-page search box to match the FF search bar (although you were no longer on this search) and all search results will disappear, replaced by the message "Press enter to search". Pressing enter reconducts your old search, not the one you were on.
This is incredibly maddening since searching for something requires frequent use of the back button to check through the list of search results, and then frequently trying the search again with slightly different terms. Although it sounds like a Google issue, it did not occur on the old firefox and has me wanting to revert. I tried to revert to the old search function via the "keyword search" addon, but this did not fix my issue. Is there a way to force FF to go back to the actual google search page I was just on instead of conducting a new google search from the FF search box when I hit the back button?

In Firefox 23 versions and later the keyword.URL pref is no longer supported and it is no longer possible to specify the search engine for the location bar via the keyword.URL pref.<br />
The search engine that is used on the location bar and on the about:home page is the search engine that is selected in the search Bar on the Navigation Toolbar.<br />
Current Firefox versions do not update the about:home home page until you refresh the page (future versions will do this automatically without a refresh) and that is what happens if you use the Back key.
You can install the Keyword Search extension to specify with search engine to use for the location bar and which search engine to use for the about:home page via the Options/Preferences windows of this extension, accessible via the about:addons page.
* Keyword Search: https://addons.mozilla.org/firefox/addon/keyword-search/

Web page different from opening link in a new tab or new window from Google search results

I had been using another browser for a few months because I did not want to lose the web pages I opened within Mozilla. I began using Mozilla again after saving off the web pages. I see that Google's web page pulls in search results as I type in keywords, a feature I don't remember seeing with other browsers along with a magnifying glass icon, like a look ahead of what a web page looks like before clicking on the link.
With the list of search results, I click on the link and tell Mozilla to open the link in a new tab. I see the google icon, "loading..." or "testing...", then results other than the link I wanted. Those other results maybe bing.com, http://66.45.255.230/click.php?c=0920f96609cb269f1d0045095c09, http://superpages.iarbiz.com/o6gIoMdG6so=-tQ1LeOu1v0kY34rDZ|oRy8Xt294ACu6X, Info.com, Supermedia Reverse Proxy (http://superpages.iarbiz.com/o6gIoMdG6so=-tQ1LeOu1v0kY34rDZ|oRy8Xt294ACu6X)or whatever else. As for the link, I managed to press stop before being redirected.
This is with any search results listed.
I thought it was Google.
Changed to Instant is off.
Nope. Still the same issue. Have already gone after malware. Tried resetting the redirect value to 0.
Above results also occur when opening the link in a new page via right menu click.
Copying link location and pasting in a new window is displaying results okay.
When resuming use of Mozilla, an update was available and installed. Did not experience the above issues before the update.
Running version 3.6.12. Running Win XP Pro SP3.
Had to go back to IE and Chrome/SRWare Iron.
Example:
Google keywords: rental cars
Clicked on Ad: _Avis_Rent_a_Car_, link is Avis.com
Clicked on top search result: Hertz_Rent-a-Car_-_Rental_Car_Discounts,_Coupons,_and_Great_Rates (magnifying glass), www.hertz.com

Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

How to change search result list entries?

Hi together,
I'd like to fit the TREX search result list to my own requirements. I've edit the Search Result Renderer Settings, Search Result Layout Set, Search Component Set and the Search Option Set. But that's not enough.
1.) I would like to display the relevant index name, in which the document was found.
2.) For special indexes (not for all!) I want to change the content link:
For example: if TREX is finding an xml-File in index "abc_index" I would like to change the content link from
"https://portalserver/irj/go/km/docs/folder/p76.xml" to
"https://portalserver/irj/go/km/docs/folder/p76.htm"
and from
"https://portalserver/irj/go/km/docs/folder/p76_data.xml" to
"https://portalserver/irj/go/km/docs/folder/p76.htm"
3.) I'd like to display a special part of the document as a explanatory text in the result list.
I think point 1 and 3 are possible with properties and HTML-extractors. But point 2 I'm afraid I have to create my own component.
But how to manage this? I cannot find any code snippets or tutorials or pattern to copy and develop further.
Is it possible or advised to write a WebDynpro? Are there other possibilities? I don't know how to start.
I would be pretty delighted to get any idea...
Thanks a lot
Steffi

Hi Stefanie
1) If you want to be able to show the name instead, you should write your own property renderer. Heres the link for the documentation: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c739e546-0701-0010-53a9-a370e39a5a20 -> How to Implement Flexible UI
Components -> Property Renderer
2) Documentation will be send in a matter of minutes.
3) I also think the web property extractors only work with the web repository manager, because as far as I know that is the only repository manager, where you can select a web property extractor upon creation. I guess you could open an OSS to SAP and ask if its not possible to extract properties in your scenario just to be sure if its not possible. But my guess is that you either have to develop your own repository manager or publish your files on a web server in order to meet your requirements.
Best regards,
Martin

If Condition in Keyword Query Language (SharePoint 2013 Search Results)

Hi All,
Can we have an "If" condition in Query text box in SharePoint 2013 Search results page. For example, i want to hide all list items whose
status is "HideItem" from appearing in search results?
I am trying this: {?{searchTerms} (contentclass:STS_ListItem -ListItemStatus:"HideItem")}
But, this hides all items like aspx pages, pdf's, docs and displays only list items.
Similarly, hide pages of some name like: AllItems.aspx, ViewDetails.aspx, AllAssets.aspx
{?{searchTerms} (contentclass:STS_ListItem_850 -filename:"AllItems.aspx")}
Any help would be great. Thanks in advance.

Thanks Steve. I found this solution after a bit of struggle :).
Also, date comparision is not working as expected.
{?{searchTerms} NOT(contentclass:STS_ListItem AND ListItemStatus:"HideItem" AND
PublishDate<{Today})} is not working and throwing syntax error.
I don't see any solid reference to KQL syntax except this msdn link.
Can you please suggest any good material on KQL syntax ?
Thank you once again.

How to sort web app items based on few fields of it on search result page?

I have a web app and its search. The search results are on multiple pages means it has pagination. My client's requirement is to have a feature which will sort results based on some web app items. for example we have a field price so when user select the price it needs to sort from high to low. Any one have idea how to do it?

I have just been playing around with this for something else, all you need to do is duplicate your price field into the weighting field and it will automatically sort from High to low for you.
Cheers
Duncan

How to exclude Web App from search results

Hi
Search results link to a unstyled Web App instead to the actual page it resides in.
Please do this:
1. go to: http://kinship.businesscatalyst.com/
2. search for "Michael" on the top global search
3. on the search results page click on the name (link).
4. you will see Michael's web app item not the actuall page it resides in (http://kinship.businesscatalyst.com/About/the-team)
How to avoid getting web app results in search?
Thanks
Micha

Hi Micha
Just add “&OT=35 “ at the end of the action in your search form:
Ex:
<form name=”xxxx” method=”post” action=”/Default.aspx?SiteSearchID=3566&ID=/results&OT=35”>
<div class=”search-box”><input type=”text” class= ............../>
<input type=”submit” class=”cat_button” value=”search” />
</div>
</form>
Here are the rest of the content types IDs, should you come across similar situations in the future:
Web Pages = 1
Literature = 6
Announcements = 7
FAQs = 9
Forums = 43
Blogs = 55
Web Apps = 35
Catalogs = 26
Bookings = 48
You can exclude multiple areas from a search, simply list them with commas: &OT=35,1,6

Displaying the count of search result?

Hi,
We have built new search pages for our client to search for candidates registering in their iRecruitment site. The client prefers to see the no of records of each search result. Typically some searches may fetch around 50000 records.
How to achieve this. Currently we have set the VO_MAX_FETCH_SIZE for one responsibility as 50000. I think this will have a performance impact and it cannot display the exact count if it is > 50000. Is there any other way just to show the count of search records?
thanks,
Hem

Henry,
As Ram insisted before that if no. of records in your VO is more than max fetch size set in profile option, then it won't return excat number of records.You can very well use this method in normal flow, if you expect that your VO query will not return more than max fetch size records.
Otherwise run a separate query to get total, as discussed.
--Mukul

How do I get a 'search results' window to pop up?

I have a master/detail form that contains a master block (say dept), and a
detail block (say emp). I would like to be able to query by emp name, but when
I execute the query, I would like a 'search results' box to pop up that contains the name I
queried for, as well as some other emp info, and the dept no. There might be
multiple records that match my query, and I'd like them all to be listed (or
list 10 or so, with a scrollbar). I'd like a push button next to each record
that will take me back to the master/detail form with that record displayed.
Can you help me get started? I've tried some things, but can't seem to figure
it out. I'm using Forms 6i. THANKS!

How about basing a default block on a view that combines EMP and Dept.
Have a multi record block and let Forms do the work for you.
In enter query mode you'll be able to fetch based on any item, and the block will be populated with the details that match the criteria.
Now when you double click a record you can for example pass the empno to another block that will display the information you need.

E-recruiting search results

Similar Messages

Maybe you are looking for