E_URLLINK_PARAMETER_SYNTAX with multiple rights

<error xmlns="http://ns.adobe.com/adept" data="E_URLLINK_PARAMETER_SYNTAX rights prn .................
I am getting above error when tried to give multiple rights in GBLink.
something like rights="$lat$$prn$"
Input is something like belwo
........fulfillment/URLLink.acsm?action=enterorder&ordersource=distributorName&orderid=... ..&resid=urn%3Auuid%3Aa819482b-1a21-45ae-8932-374e8ef78e89&dateval=1324539499&gblver=4&rig hts=$prn#0$$lat%231327130083$&auth=1359944d3989......ee74
Is multiple rights supported? (according to documentation they are and concatenation is allowed)
Is there something I am doing wrong ?
If I remove $prn#0$ then this is working fine.
I tried to change the order of lat, prn, cpy but no luck. Got same error.
Thanks in advance,
-- Reddy.

Hi Jim,
Thanks.
That solved the issue.
Thanks,
-- Reddy.

Similar Messages

Sliding Window Table Partitioning Problems with RANGE RIGHT, SPLIT, MERGE using Multiple File Groups

There is misleading information in two system views (sys.data_spaces & sys.destination_data_spaces) about the physical location of data after a partitioning MERGE and before an INDEX REBUILD operation on a partitioned table. In SQL Server 2012 SP1 CU6,
the script below (SQLCMD mode, set DataDrive & LogDrive variables for the runtime environment) will create a test database with file groups and files to support a partitioned table. The partition function and scheme spread the test data across
4 files groups, an empty partition, file group and file are maintained at the start and end of the range. A problem occurs after the SWITCH and MERGE RANGE operations, the views sys.data_spaces & sys.destination_data_spaces show the logical, not the physical,
location of data.
--=================================================================================
-- PartitionLabSetup_RangeRight.sql
-- 001. Create test database
-- 002. Add file groups and files
-- 003. Create partition function and schema
-- 004. Create and populate a test table
--=================================================================================
USE [master]
GO
-- 001 - Create Test Database
:SETVAR DataDrive "D:\SQL\Data\"
:SETVAR LogDrive "D:\SQL\Logs\"
:SETVAR DatabaseName "workspace"
:SETVAR TableName "TestTable"
-- Drop if exists and create Database
IF DATABASEPROPERTYEX(N'$(databasename)','Status') IS NOT NULL
BEGIN
ALTER DATABASE $(DatabaseName) SET SINGLE_USER WITH ROLLBACK IMMEDIATE
DROP DATABASE $(DatabaseName)
END
CREATE DATABASE $(DatabaseName)
ON
( NAME = $(DatabaseName)_data,
FILENAME = N'$(DataDrive)$(DatabaseName)_data.mdf',
SIZE = 10,
MAXSIZE = 500,
FILEGROWTH = 5 )
LOG ON
( NAME = $(DatabaseName)_log,
FILENAME = N'$(LogDrive)$(DatabaseName).ldf',
SIZE = 5MB,
MAXSIZE = 5000MB,
FILEGROWTH = 5MB ) ;
GO
-- 002. Add file groups and files
--:SETVAR DatabaseName "workspace"
--:SETVAR TableName "TestTable"
--:SETVAR DataDrive "D:\SQL\Data\"
--:SETVAR LogDrive "D:\SQL\Logs\"
DECLARE @nSQL NVARCHAR(2000) ;
DECLARE @x INT = 1;
WHILE @x <= 6
BEGIN
SELECT @nSQL =
'ALTER DATABASE $(DatabaseName)
ADD FILEGROUP $(TableName)_fg' + RTRIM(CAST(@x AS CHAR(5))) + ';
ALTER DATABASE $(DatabaseName)
ADD FILE
NAME= ''$(TableName)_f' + CAST(@x AS CHAR(5)) + ''',
FILENAME = ''$(DataDrive)\$(TableName)_f' + RTRIM(CAST(@x AS CHAR(5))) + '.ndf''
TO FILEGROUP $(TableName)_fg' + RTRIM(CAST(@x AS CHAR(5))) + ';'
EXEC sp_executeSQL @nSQL;
SET @x = @x + 1;
END
-- 003. Create partition function and schema
--:SETVAR TableName "TestTable"
--:SETVAR DatabaseName "workspace"
USE $(DatabaseName);
CREATE PARTITION FUNCTION $(TableName)_func (int)
AS RANGE RIGHT FOR VALUES
0,
15,
30,
45,
60
CREATE PARTITION SCHEME $(TableName)_scheme
AS
PARTITION $(TableName)_func
TO
$(TableName)_fg1,
$(TableName)_fg2,
$(TableName)_fg3,
$(TableName)_fg4,
$(TableName)_fg5,
$(TableName)_fg6
-- Create TestTable
--:SETVAR TableName "TestTable"
--:SETVAR BackupDrive "D:\SQL\Backups\"
--:SETVAR DatabaseName "workspace"
CREATE TABLE [dbo].$(TableName)(
[Partition_PK] [int] NOT NULL,
[GUID_PK] [uniqueidentifier] NOT NULL,
[CreateDate] [datetime] NULL,
[CreateServer] [nvarchar](50) NULL,
[RandomNbr] [int] NULL,
CONSTRAINT [PK_$(TableName)] PRIMARY KEY CLUSTERED
[Partition_PK] ASC,
[GUID_PK] ASC
) ON $(TableName)_scheme(Partition_PK)
) ON $(TableName)_scheme(Partition_PK)
ALTER TABLE [dbo].$(TableName) ADD CONSTRAINT [DF_$(TableName)_GUID_PK] DEFAULT (newid()) FOR [GUID_PK]
ALTER TABLE [dbo].$(TableName) ADD CONSTRAINT [DF_$(TableName)_CreateDate] DEFAULT (getdate()) FOR [CreateDate]
ALTER TABLE [dbo].$(TableName) ADD CONSTRAINT [DF_$(TableName)_CreateServer] DEFAULT (@@servername) FOR [CreateServer]
-- 004. Create and populate a test table
-- Load TestTable Data - Seconds 0-59 are used as the Partitoning Key
--:SETVAR TableName "TestTable"
SET NOCOUNT ON;
DECLARE @Now DATETIME = GETDATE()
WHILE @Now > DATEADD(minute,-1,GETDATE())
BEGIN
INSERT INTO [dbo].$(TableName)
([Partition_PK]
,[RandomNbr])
VALUES
DATEPART(second,GETDATE())
,ROUND((RAND() * 100),0)
END
-- Confirm table partitioning - http://lextonr.wordpress.com/tag/sys-destination_data_spaces/
SELECT
N'DatabaseName' = DB_NAME()
, N'SchemaName' = s.name
, N'TableName' = o.name
, N'IndexName' = i.name
, N'IndexType' = i.type_desc
, N'PartitionScheme' = ps.name
, N'DataSpaceName' = ds.name
, N'DataSpaceType' = ds.type_desc
, N'PartitionFunction' = pf.name
, N'PartitionNumber' = dds.destination_id
, N'BoundaryValue' = prv.value
, N'RightBoundary' = pf.boundary_value_on_right
, N'PartitionFileGroup' = ds2.name
, N'RowsOfData' = p.[rows]
FROM
sys.objects AS o
INNER JOIN sys.schemas AS s
ON o.[schema_id] = s.[schema_id]
INNER JOIN sys.partitions AS p
ON o.[object_id] = p.[object_id]
INNER JOIN sys.indexes AS i
ON p.[object_id] = i.[object_id]
AND p.index_id = i.index_id
INNER JOIN sys.data_spaces AS ds
ON i.data_space_id = ds.data_space_id
INNER JOIN sys.partition_schemes AS ps
ON ds.data_space_id = ps.data_space_id
INNER JOIN sys.partition_functions AS pf
ON ps.function_id = pf.function_id
LEFT OUTER JOIN sys.partition_range_values AS prv
ON pf.function_id = prv.function_id
AND p.partition_number = prv.boundary_id
LEFT OUTER JOIN sys.destination_data_spaces AS dds
ON ps.data_space_id = dds.partition_scheme_id
AND p.partition_number = dds.destination_id
LEFT OUTER JOIN sys.data_spaces AS ds2
ON dds.data_space_id = ds2.data_space_id
ORDER BY
DatabaseName
,SchemaName
,TableName
,IndexName
,PartitionNumber
--=================================================================================
-- SECTION 2 - SWITCH OUT
-- 001 - Create TestTableOut
-- 002 - Switch out partition in range 0-14
-- 003 - Merge range 0 -29
-- 001. TestTableOut
:SETVAR TableName "TestTable"
IF OBJECT_ID('dbo.$(TableName)Out') IS NOT NULL
DROP TABLE [dbo].[$(TableName)Out]
CREATE TABLE [dbo].[$(TableName)Out](
[Partition_PK] [int] NOT NULL,
[GUID_PK] [uniqueidentifier] NOT NULL,
[CreateDate] [datetime] NULL,
[CreateServer] [nvarchar](50) NULL,
[RandomNbr] [int] NULL,
CONSTRAINT [PK_$(TableName)Out] PRIMARY KEY CLUSTERED
[Partition_PK] ASC,
[GUID_PK] ASC
) ON $(TableName)_fg2;
GO
-- 002 - Switch out partition in range 0-14
--:SETVAR TableName "TestTable"
ALTER TABLE dbo.$(TableName)
SWITCH PARTITION 2 TO dbo.$(TableName)Out;
-- 003 - Merge range 0 - 29
--:SETVAR TableName "TestTable"
ALTER PARTITION FUNCTION $(TableName)_func()
MERGE RANGE (15);
-- Confirm table partitioning
-- Original source of this query - http://lextonr.wordpress.com/tag/sys-destination_data_spaces/
SELECT
N'DatabaseName' = DB_NAME()
, N'SchemaName' = s.name
, N'TableName' = o.name
, N'IndexName' = i.name
, N'IndexType' = i.type_desc
, N'PartitionScheme' = ps.name
, N'DataSpaceName' = ds.name
, N'DataSpaceType' = ds.type_desc
, N'PartitionFunction' = pf.name
, N'PartitionNumber' = dds.destination_id
, N'BoundaryValue' = prv.value
, N'RightBoundary' = pf.boundary_value_on_right
, N'PartitionFileGroup' = ds2.name
, N'RowsOfData' = p.[rows]
FROM
sys.objects AS o
INNER JOIN sys.schemas AS s
ON o.[schema_id] = s.[schema_id]
INNER JOIN sys.partitions AS p
ON o.[object_id] = p.[object_id]
INNER JOIN sys.indexes AS i
ON p.[object_id] = i.[object_id]
AND p.index_id = i.index_id
INNER JOIN sys.data_spaces AS ds
ON i.data_space_id = ds.data_space_id
INNER JOIN sys.partition_schemes AS ps
ON ds.data_space_id = ps.data_space_id
INNER JOIN sys.partition_functions AS pf
ON ps.function_id = pf.function_id
LEFT OUTER JOIN sys.partition_range_values AS prv
ON pf.function_id = prv.function_id
AND p.partition_number = prv.boundary_id
LEFT OUTER JOIN sys.destination_data_spaces AS dds
ON ps.data_space_id = dds.partition_scheme_id
AND p.partition_number = dds.destination_id
LEFT OUTER JOIN sys.data_spaces AS ds2
ON dds.data_space_id = ds2.data_space_id
ORDER BY
DatabaseName
,SchemaName
,TableName
,IndexName
,PartitionNumber
The table below shows the results of the ‘Confirm Table Partitioning’ query, before and after the MERGE.
The T-SQL code below illustrates the problem.
-- PartitionLab_RangeRight
USE workspace;
DROP TABLE dbo.TestTableOut;
USE master;
ALTER DATABASE workspace
REMOVE FILE TestTable_f3 ;
-- ERROR
--Msg 5042, Level 16, State 1, Line 1
--The file 'TestTable_f3 ' cannot be removed because it is not empty.
ALTER DATABASE workspace
REMOVE FILE TestTable_f2 ;
-- Works surprisingly!!
use workspace;
ALTER INDEX [PK_TestTable] ON [dbo].[TestTable] REBUILD PARTITION = 2;
--Msg 622, Level 16, State 3, Line 2
--The filegroup "TestTable_fg2" has no files assigned to it. Tables, indexes, text columns, ntext columns, and image columns cannot be populated on this filegroup until a file is added.
--The statement has been terminated.
If you run ALTER INDEX REBUILD before trying to remove files from File Group 3, it works. Rerun the database setup script then the code below.
-- RANGE RIGHT
-- Rerun PartitionLabSetup_RangeRight.sql before the code below
USE workspace;
DROP TABLE dbo.TestTableOut;
ALTER INDEX [PK_TestTable] ON [dbo].[TestTable] REBUILD PARTITION = 2;
USE master;
ALTER DATABASE workspace
REMOVE FILE TestTable_f3;
-- Works as expected!!
The file in File Group 2 appears to contain data but it can be dropped. Although the system views are reporting the data in File Group 2, it still physically resides in File Group 3 and isn’t moved until the index is rebuilt. The RANGE RIGHT function means
the left file group (File Group 2) is retained when splitting ranges.
RANGE LEFT would have retained the data in File Group 3 where it already resided, no INDEX REBUILD is necessary to effectively complete the MERGE operation. The script below implements the same partitioning strategy (data distribution between partitions)
on the test table but uses different boundary definitions and RANGE LEFT.
--=================================================================================
-- PartitionLabSetup_RangeLeft.sql
-- 001. Create test database
-- 002. Add file groups and files
-- 003. Create partition function and schema
-- 004. Create and populate a test table
--=================================================================================
USE [master]
GO
-- 001 - Create Test Database
:SETVAR DataDrive "D:\SQL\Data\"
:SETVAR LogDrive "D:\SQL\Logs\"
:SETVAR DatabaseName "workspace"
:SETVAR TableName "TestTable"
-- Drop if exists and create Database
IF DATABASEPROPERTYEX(N'$(databasename)','Status') IS NOT NULL
BEGIN
ALTER DATABASE $(DatabaseName) SET SINGLE_USER WITH ROLLBACK IMMEDIATE
DROP DATABASE $(DatabaseName)
END
CREATE DATABASE $(DatabaseName)
ON
( NAME = $(DatabaseName)_data,
FILENAME = N'$(DataDrive)$(DatabaseName)_data.mdf',
SIZE = 10,
MAXSIZE = 500,
FILEGROWTH = 5 )
LOG ON
( NAME = $(DatabaseName)_log,
FILENAME = N'$(LogDrive)$(DatabaseName).ldf',
SIZE = 5MB,
MAXSIZE = 5000MB,
FILEGROWTH = 5MB ) ;
GO
-- 002. Add file groups and files
--:SETVAR DatabaseName "workspace"
--:SETVAR TableName "TestTable"
--:SETVAR DataDrive "D:\SQL\Data\"
--:SETVAR LogDrive "D:\SQL\Logs\"
DECLARE @nSQL NVARCHAR(2000) ;
DECLARE @x INT = 1;
WHILE @x <= 6
BEGIN
SELECT @nSQL =
'ALTER DATABASE $(DatabaseName)
ADD FILEGROUP $(TableName)_fg' + RTRIM(CAST(@x AS CHAR(5))) + ';
ALTER DATABASE $(DatabaseName)
ADD FILE
NAME= ''$(TableName)_f' + CAST(@x AS CHAR(5)) + ''',
FILENAME = ''$(DataDrive)\$(TableName)_f' + RTRIM(CAST(@x AS CHAR(5))) + '.ndf''
TO FILEGROUP $(TableName)_fg' + RTRIM(CAST(@x AS CHAR(5))) + ';'
EXEC sp_executeSQL @nSQL;
SET @x = @x + 1;
END
-- 003. Create partition function and schema
--:SETVAR TableName "TestTable"
--:SETVAR DatabaseName "workspace"
USE $(DatabaseName);
CREATE PARTITION FUNCTION $(TableName)_func (int)
AS RANGE LEFT FOR VALUES
-1,
14,
29,
44,
59
CREATE PARTITION SCHEME $(TableName)_scheme
AS
PARTITION $(TableName)_func
TO
$(TableName)_fg1,
$(TableName)_fg2,
$(TableName)_fg3,
$(TableName)_fg4,
$(TableName)_fg5,
$(TableName)_fg6
-- Create TestTable
--:SETVAR TableName "TestTable"
--:SETVAR BackupDrive "D:\SQL\Backups\"
--:SETVAR DatabaseName "workspace"
CREATE TABLE [dbo].$(TableName)(
[Partition_PK] [int] NOT NULL,
[GUID_PK] [uniqueidentifier] NOT NULL,
[CreateDate] [datetime] NULL,
[CreateServer] [nvarchar](50) NULL,
[RandomNbr] [int] NULL,
CONSTRAINT [PK_$(TableName)] PRIMARY KEY CLUSTERED
[Partition_PK] ASC,
[GUID_PK] ASC
) ON $(TableName)_scheme(Partition_PK)
) ON $(TableName)_scheme(Partition_PK)
ALTER TABLE [dbo].$(TableName) ADD CONSTRAINT [DF_$(TableName)_GUID_PK] DEFAULT (newid()) FOR [GUID_PK]
ALTER TABLE [dbo].$(TableName) ADD CONSTRAINT [DF_$(TableName)_CreateDate] DEFAULT (getdate()) FOR [CreateDate]
ALTER TABLE [dbo].$(TableName) ADD CONSTRAINT [DF_$(TableName)_CreateServer] DEFAULT (@@servername) FOR [CreateServer]
-- 004. Create and populate a test table
-- Load TestTable Data - Seconds 0-59 are used as the Partitoning Key
--:SETVAR TableName "TestTable"
SET NOCOUNT ON;
DECLARE @Now DATETIME = GETDATE()
WHILE @Now > DATEADD(minute,-1,GETDATE())
BEGIN
INSERT INTO [dbo].$(TableName)
([Partition_PK]
,[RandomNbr])
VALUES
DATEPART(second,GETDATE())
,ROUND((RAND() * 100),0)
END
-- Confirm table partitioning - http://lextonr.wordpress.com/tag/sys-destination_data_spaces/
SELECT
N'DatabaseName' = DB_NAME()
, N'SchemaName' = s.name
, N'TableName' = o.name
, N'IndexName' = i.name
, N'IndexType' = i.type_desc
, N'PartitionScheme' = ps.name
, N'DataSpaceName' = ds.name
, N'DataSpaceType' = ds.type_desc
, N'PartitionFunction' = pf.name
, N'PartitionNumber' = dds.destination_id
, N'BoundaryValue' = prv.value
, N'RightBoundary' = pf.boundary_value_on_right
, N'PartitionFileGroup' = ds2.name
, N'RowsOfData' = p.[rows]
FROM
sys.objects AS o
INNER JOIN sys.schemas AS s
ON o.[schema_id] = s.[schema_id]
INNER JOIN sys.partitions AS p
ON o.[object_id] = p.[object_id]
INNER JOIN sys.indexes AS i
ON p.[object_id] = i.[object_id]
AND p.index_id = i.index_id
INNER JOIN sys.data_spaces AS ds
ON i.data_space_id = ds.data_space_id
INNER JOIN sys.partition_schemes AS ps
ON ds.data_space_id = ps.data_space_id
INNER JOIN sys.partition_functions AS pf
ON ps.function_id = pf.function_id
LEFT OUTER JOIN sys.partition_range_values AS prv
ON pf.function_id = prv.function_id
AND p.partition_number = prv.boundary_id
LEFT OUTER JOIN sys.destination_data_spaces AS dds
ON ps.data_space_id = dds.partition_scheme_id
AND p.partition_number = dds.destination_id
LEFT OUTER JOIN sys.data_spaces AS ds2
ON dds.data_space_id = ds2.data_space_id
ORDER BY
DatabaseName
,SchemaName
,TableName
,IndexName
,PartitionNumber
--=================================================================================
-- SECTION 2 - SWITCH OUT
-- 001 - Create TestTableOut
-- 002 - Switch out partition in range 0-14
-- 003 - Merge range 0 -29
-- 001. TestTableOut
:SETVAR TableName "TestTable"
IF OBJECT_ID('dbo.$(TableName)Out') IS NOT NULL
DROP TABLE [dbo].[$(TableName)Out]
CREATE TABLE [dbo].[$(TableName)Out](
[Partition_PK] [int] NOT NULL,
[GUID_PK] [uniqueidentifier] NOT NULL,
[CreateDate] [datetime] NULL,
[CreateServer] [nvarchar](50) NULL,
[RandomNbr] [int] NULL,
CONSTRAINT [PK_$(TableName)Out] PRIMARY KEY CLUSTERED
[Partition_PK] ASC,
[GUID_PK] ASC
) ON $(TableName)_fg2;
GO
-- 002 - Switch out partition in range 0-14
--:SETVAR TableName "TestTable"
ALTER TABLE dbo.$(TableName)
SWITCH PARTITION 2 TO dbo.$(TableName)Out;
-- 003 - Merge range 0 - 29
:SETVAR TableName "TestTable"
ALTER PARTITION FUNCTION $(TableName)_func()
MERGE RANGE (14);
-- Confirm table partitioning
-- Original source of this query - http://lextonr.wordpress.com/tag/sys-destination_data_spaces/
SELECT
N'DatabaseName' = DB_NAME()
, N'SchemaName' = s.name
, N'TableName' = o.name
, N'IndexName' = i.name
, N'IndexType' = i.type_desc
, N'PartitionScheme' = ps.name
, N'DataSpaceName' = ds.name
, N'DataSpaceType' = ds.type_desc
, N'PartitionFunction' = pf.name
, N'PartitionNumber' = dds.destination_id
, N'BoundaryValue' = prv.value
, N'RightBoundary' = pf.boundary_value_on_right
, N'PartitionFileGroup' = ds2.name
, N'RowsOfData' = p.[rows]
FROM
sys.objects AS o
INNER JOIN sys.schemas AS s
ON o.[schema_id] = s.[schema_id]
INNER JOIN sys.partitions AS p
ON o.[object_id] = p.[object_id]
INNER JOIN sys.indexes AS i
ON p.[object_id] = i.[object_id]
AND p.index_id = i.index_id
INNER JOIN sys.data_spaces AS ds
ON i.data_space_id = ds.data_space_id
INNER JOIN sys.partition_schemes AS ps
ON ds.data_space_id = ps.data_space_id
INNER JOIN sys.partition_functions AS pf
ON ps.function_id = pf.function_id
LEFT OUTER JOIN sys.partition_range_values AS prv
ON pf.function_id = prv.function_id
AND p.partition_number = prv.boundary_id
LEFT OUTER JOIN sys.destination_data_spaces AS dds
ON ps.data_space_id = dds.partition_scheme_id
AND p.partition_number = dds.destination_id
LEFT OUTER JOIN sys.data_spaces AS ds2
ON dds.data_space_id = ds2.data_space_id
ORDER BY
DatabaseName
,SchemaName
,TableName
,IndexName
,PartitionNumber
The table below shows the results of the ‘Confirm Table Partitioning’ query, before and after the MERGE.
The data in the File and File Group to be dropped (File Group 2) has already been switched out; File Group 3 contains the data so no index rebuild is needed to move data and complete the MERGE.
RANGE RIGHT would not be a problem in a ‘Sliding Window’ if the same file group is used for all partitions, when they are created and dropped it introduces a dependency on full index rebuilds. Larger tables are typically partitioned and a full index rebuild
might be an expensive operation. I’m not sure how a RANGE RIGHT partitioning strategy could be implemented, with an ascending partitioning key, using multiple file groups without having to move data. Using a single file group (multiple files) for all partitions
within a table would avoid physically moving data between file groups; no index rebuild would be necessary to complete a MERGE and system views would accurately reflect the physical location of data.
If a RANGE RIGHT partition function is used, the data is physically in the wrong file group after the MERGE assuming a typical ascending partitioning key, and the 'Data Spaces' system views might be misleading. Thanks to Manuj and Chris for a lot of help
investigating this.
NOTE 10/03/2014 - The solution
The solution is so easy it's embarrassing, I was using the wrong boundary points for the MERGE (both RANGE LEFT & RANGE RIGHT) to get rid of historic data.
-- Wrong Boundary Point Range Right
--ALTER PARTITION FUNCTION $(TableName)_func()
--MERGE RANGE (15);
-- Wrong Boundary Point Range Left
--ALTER PARTITION FUNCTION $(TableName)_func()
--MERGE RANGE (14);
-- Correct Boundary Pounts for MERGE
ALTER PARTITION FUNCTION $(TableName)_func()
MERGE RANGE (0); -- or -1 for RANGE LEFT
The empty, switched out partition (on File Group 2) is then MERGED with the empty partition maintained at the start of the range and no data movement is necessary. I retract the suggestion that a problem exists with RANGE RIGHT Sliding Windows using multiple
file groups and apologize :-)

Hi Paul Brewer,
Thanks for your post and glad to hear that the issue is resolved. It is kind of you post a reply to share your solution. That way, other community members could benefit from your sharing.
Regards.
Sofiya Li
Sofiya Li
TechNet Community Support

For some reason, my compression option is grayed out under "File" menu, and when I select a folder with multiple files, or multiple documents, and try to right-click or tap the mousepad with two fingers, I do not get a "compress" option available. Help.

I don't know why, but when I select a folder with multiple docs contained within it, or multiple files, the Compress option is grayed out under the File menu, nor is it available when I right-click. Please help.

Yes it is, but I have the same problem of the option does not appear with "right click" (I'm actually control-clicking), and COMPRESS is grayed out under the file menu. I'd like to fix it.
Hmm. After finding the Archive Utility,* I tried archiving the folder. It came out as .cpgz, ugh. Found there was a preference to make .zip the default. It worked!
And now…the menus are not grayed out. ?!?! OK.'
Hope this helps someone.
*You cannot find this via search, apparently it is a hidden file, you have to click from the root drive through to /System/Library/CoreServices (Thanks for the file path Alberto!)

Fill-the-gap with multiple gaps - show right answers colored

Hello,
I'm using CP5 on OSX 10.6.4
I create a quiz "fill-the-gap" with multiple gaps (textfields/drop-down menu) in a single slide.
When a user doesn't fill all gaps he get the info, that he have to fill all gaps. O.K.
When he fills wrong answers he get the info, that it is not correct. But he can't see, which answers are right answers.
Has CP5 (i.e with a variable) the feature to color right answers (i.e the font turns to green) others turns to red?
Or right answers turns to non-editable textfields or drop-downs aren't available after setting the right answer.
Ishan

Hello,
I never used CP5 on Mac, just on Windows. So I'm not totally sure my answers will apply.
About your question to see the right answers: normally this will be done during Review, provided you did allow Review in the Quiz Settings (Allow the user to review the Quiz). You can see the message that will be showed when selecting the Review area on the stage and looking at the Properties. The messages can be edited. In the screenshot you see the default messages. For an incorrect answer both the given answer ('Your answer:...') and the correct answer will be put in the Review area during review.
For your second questions: as far as I know, this is not possible with the default dropdown list of the Question slide for 'Fill-in-the-Blank'. It could be made possible by constructing your own Question slide, using the available objects, user variables and advanced actions.
Lilybiri

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

Thank you for that info.
For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
There are two issues with that file:
The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
Good luck,
Hunt

How to share account with multiple devices?

3 kids with 3 devices - an iPod Touch and two iPads Mini - family shares one account with Apple/iTunes and one library on our family PC. They use FACETIME and MESSAGES with their friends, and they all see each others messages and conversations. How do I fix this? Is there a setting or a way to create sub-accounts off the family account so they can still share the main library for music and video OR do I have to create separate Apple/iTunes accounts for each kid? Is there a setting on their devices that can help? Any help is greatly appreciated. I'm not even sure the right question to ask...

How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
 Cheers, Tom

Print to pdf often doesn't work with multiple pages?

When I try to print to pdf, it often doesn't work right.
I can select, for example, multiple Excel worksheets to print. It looks fine with 4 pages in Preview, but when I select save as .pdf, it only prints 2 of the 4 pages, and it prints those in 2 separate documents rather than a single .pdf document with multiple pages.
Is there a way to do this? Is this an Apple error or Microsoft error? Since it looks fine in Preview, my guess it is an Apple error?
Mark

It sounds like this is the problem with the way Apple handles multiple orientations in a pdf document. You can use Acrobat to print the files - it handles multiple orientations correctly. There was a previous thread on this:
http://discussions.apple.com/message.jspa?messageID=1983431#1983431

Excel Upload With Multiple Worksheets

Friends,
I have requirement wherein I have to read data from an excel file with multiple worksheets. I have gone through some earlier postings but most of them explain about creating an excel file with multiple worksheets (which is right oppsite of what I need to do)
I am trying to understand the concept of OLE and implement it but am finding it tricky!
Please help me out!
Thanks,
Shyam

See this site: AN EASY REFERENCE FOR OLE AUTOMATION by Serder Simsekler.
Best!
Jim

How to tune performance of a cube with multiple date dimension?

Hi,
I have a cube where I have a measure. Now for a turn time report I am taking the date difference of two dates and taking the average, max and min of the date difference. The graph is taking long time to load. I am using Telerik report controls.
Is there any way to tune up the cube performance with multiple date dimension to it? What are the key rules and beset practices for a cube to perform well?
Thanks,
Amit

Hi amit2015,
According to your description, you want to improve the performance of a SSAS cube with multiple date dimension. Right?
In Analysis Services, there are many tips to improve the performance of a cube. In this scenario, I suggest you only keep one dimension, and only include the column which are required for your calculation. Please refer to "dimension design" in
the link below:
http://www.mssqltips.com/sqlservertip/2567/ssas--best-practices-and-performance-optimization--part-3-of-4/
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

File sharing with multiple users on one Mac

I have two Macs, both of which ca seen each other across the network. My question regards file sharing with multiple users on the same computer. When file sharing, are the files from all users available across the network, or just those of the user presently logged in? The issue is that I am trying to access files from a user who isn't currently logged in, but another user on that computer is. I need to get into that person's documents, but I don't see a way to navigate to their documents folder.

Right, I got that. But the computer is in constant use by User A, while I need access to User B's files. I could need access at anytime, and it would be a pain to make User A log off and log in as User B everytime. I was just wondering if there is anyway to access User B's files in this situation, without logging User B in.

When closing 2 windows(with multiple tabs each), system restore does not properly restore the second window's tabs. Is this a bug in the new update/any ideas to fix?

I regularly use 2 windows with multiple tabs each and session restore would work to get them all back, but after this latest update the second window does not restore properly, with the first tab not visible on top(only in drop down menu) and the add a tab button now on the left(instead of right). The add a tab button is not really concerning other than it indicates other problems with the tabs on tab of the 2nd window. Not having the 1st tab visible is frustrating, because I can not move it or as easily navigate. Also, the tabs on top of the 2nd window that are visible no longer have the "x" to close visible unless that tab is selected. I'm assuming this is a problem with the new release/update, since this is the first time I've ever encountered the problem, and I've shut down and restored Firefox a few times to make sure this was a recurring problem and not a one-time deal. Any ideas on how to fix would be welcome(other than perhaps cramming my tabs onto one window or sucking it up XD).

Hi,
You can try to '''Reset toolbars and controls:''' and '''Make Changes and Restart''' in the [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode] start screen.
If the problem persists, please try a [https://support.mozilla.org/en-US/kb/Managing-profiles?s=profile&r=0&e=sph&as=s new profile]. You can later copy [https://support.mozilla.org/en-US/kb/Backing%20up%20your%20information?s=backup&r=1&e=sph&as=s needed data] from the old profile to this.
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]

Is it currently possible to create a doughnut chart with multiple concentric circles in SSRS?

Is there currently any way to create a 'doughnut' chart with multiple concentric circles in an SSRS report (any version), without using 3rd party tools?
Something like this, perhaps?
(For that matter is it possible to create this using JavaScript? It's my understanding that this image was originally created in a web app using JavaScript. So far I've not been able to pin down the details. I've found hints that JavaScript
can be used in SSRS reports but so far no clear working examples.)

Hi B.Chernick,
According to your description, you want to create a create a doughnut chart with multiple concentric circles in your report. Right?
In Reporting Services, we only have doughnut chart with one concentric circle. All the category group is in that concentric circle. Though we can embed javascript injection in expression, it only give the css style to values or report
items which can change the looking. It can't change the structure of the report items itself. So your requirement can't be achieved current.
For your requirement, we suggest you provide Microsoft a feature request at
https://connect.microsoft.com/SQLServer
so that we may try to expand the product features based on your needs.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Having trouble with multiple user accounts

I am still getting used to Aperture and am having trouble with multiple user accounts on my Mac.
My wife and I have separate accounts on our Mac, and both have Administrator rights. We keep our Aperture library in the "Shared" folder, and I have made sure that both she and I have read/write capabilities on the Aperture library.
However, she has difficulty creating new projects, saving data, and viewing thumbnails in Aperture. Whenever she creates a project, it does not save into Aperture, and cannot be viewed by any user. In addition, changes she makes to photos do not save. She also cannot view thumbnails of any photos (although she can see the photos in the viewer).
Are there any changes I need to make to the user accounts so she can have all these capabilities?
Many Thanks.

Rather than having the Aperture library reside in the shared folder, keep it within a folder residing at the top level of your mac, eg.
I actually keep mine on one of my RAID disks.
Tony

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How to create a table with multiple select on???

Hi all,
I am new to webdynpro and my requirement is to create a table with multiple selection on.I have to add abt 10 rows in the table but only 5 rows should be visible and moreover a verticalscroll should be available to view other rows.Can anybody explain me in detail how to do that.Please reply as if you are explaining to a newcomer.Reply ASAP as i have to do it today.
Thanxs

Hi,
1. Create a value node in your context name Table and set its cardinality to 0:n
2. Create 2 value attributes within the Table node name value1 and value2
3. Goto Outline view> Right click on TransparentUIContainer>Apply Template> Select Table>mark the node Table and it's attributes.
you have created a table and binded its value to context
Table UI properties
4.Set Selection Mode to Multi
5.Set Visible Row Count to 5
6.ScrollableColCount to 5
In your implemetaion, you can add values to table as follow:
IPrivate<viewname>.ITableElement ele = wdContext.nodeTable().createTableElement();
ele.setValue1(<value>);
ele.setValue2(<value>);
wdContext.nodeTable().addElement(ele);
The above code will allow you to add elements to your table node.
Regards,
Murtuza

E_URLLINK_PARAMETER_SYNTAX with multiple rights

Similar Messages

Maybe you are looking for