E2136 ySubscriptXOffset is less than zero -11
Hallo,
Every (or mostly) italic fonts generated by the FDK give the the
following error code from the MS Fontvalidator.
E2136 ySubscriptXOffset is less than zero -11
Is this a real problem?
Andreas
We believe this is a bug inthe Font Validator, and have reported it to Microsoft. There are perfectly good reasons to have automatic subscript to shift stuff to the left with an italic font.
T
Similar Messages
-
How to report only quantities less than zero on a calculated field
I do not understand why my text will not work when it comes to reporting only 'Missing POs' less than zero, I assume it is because I am using 'int' on some fields?
Any advice?
SELECT
t0.father as 'Parent Code',
t2.itemname as 'Parent Description',
t2.frgnname as 'Parent Status',
t0.code as 'Child Code',
t1.itemname as 'Child Description',
t1.frgnname as 'Child Status',
t0.comment as 'Master',
cast(t3.onhand as int) as 'Child Uncommitted Stock',
cast(t3.iscommited as int) as 'Child Committed Stock',
(cast(t3.onhand as int) - cast(t3.iscommited as int)) as 'Child Free Stock',
cast(t3.onorder as int) as 'Purchase Orders',
(cast(t3.onhand as int) - cast(t3.iscommited as int)) + cast(t3.onorder as int) as 'Missing POs'
FROM
itt1 t0
inner join oitm t1 on t0.code = t1.itemcode
inner join oitm t2 on t0.father = t2.itemcode
LEFT JOIN OITW T3 ON T3.WHSCODE = T0.Warehouse AND T3.ItemCode = T0.Code
Where T3.WHSCODE Like '[%0]%' and 'Missing POs' < 0
ORDER BY
'Missing POs' asc, t0.father, t0.code
Many thanks,
Robin (I will be awarding points on all my outstanding questions shorlty - management time pressure at mo!)Try this:
SELECT
t0.father as 'Parent Code',
t2.itemname as 'Parent Description',
t2.frgnname as 'Parent Status',
t0.code as 'Child Code',
t1.itemname as 'Child Description',
t1.frgnname as 'Child Status',
t0.comment as 'Master',
cast(t3.onhand as int) as 'Child Uncommitted Stock',
cast(t3.iscommited as int) as 'Child Committed Stock',
(cast(t3.onhand as int) - cast(t3.iscommited as int)) as 'Child Free Stock',
cast(t3.onorder as int) as 'Purchase Orders',
(cast(t3.onhand as int) - cast(t3.iscommited as int))
+ cast(t3.onorder as int) as 'Missing POs'
FROM
itt1 t0
inner join oitm t1 on t0.code = t1.itemcode
inner join oitm t2 on t0.father = t2.itemcode
LEFT JOIN OITW T3 ON T3.WHSCODE = T0.Warehouse AND T3.ItemCode = T0.Code
Where T3.WHSCODE Like '%0%' and (cast(t3.onhand as int) - cast(t3.iscommited as int))
+ cast(t3.onorder as int) < 0
ORDER BY
(cast(t3.onhand as int) - cast(t3.iscommited as int))
+ cast(t3.onorder as int),t0.father, t0.code -
Java.sql.SQLException: Invalid precision value. Cannot be less than zero
Hi,
In my portlet application have several jsf tables which bind to several oracle tables. I have tested the portlet in pluto and tried to deploy it on liferay. However, I get an exception stating:
java.sql.SQLException: Invalid precision value. Cann
ot be less than zero
What could this exception mean? Has anyone else encountered this?
Marc
P.S. The trace is shown below:
Feb 6, 2007 12:34:56 AM org.apache.catalina.core.ApplicationDispatcher invoke
SEVERE: Servlet.service() for servlet jsp threw exception
java.lang.RuntimeException: java.sql.SQLException: Invalid precision value. Cann
ot be less than zero
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(Cach
edRowSetDataProvider.java:343)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(Ca
chedRowSetDataProvider.java:300)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(Cache
dRowSetDataProvider.java:624)
at com.sun.rave.web.ui.component.TableRowGroup.getRowKeys(TableRowGroup.
java:806)
at com.sun.rave.web.ui.component.TableRowGroup.getFilteredRowKeys(TableR
owGroup.java:429)
at com.sun.rave.web.ui.component.TableRowGroup.getRowCount(TableRowGroup
.java:749)
at com.sun.rave.web.ui.component.Table.getRowCount(Table.java:307)
at com.sun.rave.web.ui.renderer.TableRenderer.renderTitle(TableRenderer.
java:400)
at com.sun.rave.web.ui.renderer.TableRenderer.encodeBegin(TableRenderer.
java:123)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.jav
a:683)I've dug deeper into this problem and am able reproduce the error in the Pluto server. To reproduce this error, I modified my Oracle jdbc driver from the JSC embedded driver (smoracle.jar) to the Oracle native driver (ojdbc14.jar). Now, I am getting the exception in my Sun Application Server:
What is the difference between ojdbc14.jar and smoracle.jar that could cause this problem? What can I do so that I can fix this problem for ojdbc14.jar?
Thanks,
Marc
P.S.
The problem is with the clob column (DOR_NOTE_TX). The stack trace is:
[#|2007-02-06T09:00:53.663-0800|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=16;|
Reader executing query ps=0 SELECT DOR_NOTE_DT, DOR_NOTE_TX FROM DOR.DOR_NOTE_DATA WHERE DOR_NOTE_CD='SECURITY' AND TO_CHAR(DOR_Note_Dt, 'mm/dd/yyyy') = '02/05/2007'
No Params|#]
[#|2007-02-06T09:00:53.679-0800|WARNING|sun-appserver-pe8.2|javax.enterprise.system.stream.err|_ThreadID=16;|
java.sql.SQLException: Invalid precision value. Cannot be less than zero
Message was edited by:
marcnikko -
Umbraco CMS - startindex cannot be less than zero error is showing instead of 404 error page
I am running into an issue with an Umbraco website.
If I miskey the URL on a top level page, e.g. mysite.com/wrongpage I get an asp error.
If I miskey it on a subpage, even if the top level page is incorrect too, I get my correct 404 error e.g. mysite.com/wrongpage/wrongpage2
At this point I'm trying to find out whether it's a bug in Umbraco 4.11.10 or if this error is caused by something obvious. I'm completely stuck and not particularly technical (I'm not a developer).
If anyone could help explain what this error means, and/or if there's any way to correct or bypass it I would really appreciate the help.
The full contents of the error are:
Server Error in '/' Application.
StartIndex cannot be less than zero.
Parameter name: startIndex
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ArgumentOutOfRangeException: StartIndex cannot be less than zero.
Parameter name: startIndex
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[ArgumentOutOfRangeException: StartIndex cannot be less than zero.
Parameter name: startIndex]
System.String.InternalSubStringWithChecks(Int32 startIndex, Int32 length, Boolean fAlwaysCopy) +10698829
System.String.Substring(Int32 startIndex) +12
AutoFolders.NotFoundHandler.Execute(String url) +538
Umbraco.Web.Routing.LookupByNotFoundHandlers.HandlePageNotFound(PublishedContentRequest docRequest) +1148
Umbraco.Web.Routing.LookupByNotFoundHandlers.TrySetDocument(PublishedContentRequest docRequest) +10
Umbraco.Web.Routing.PublishedContentRequestBuilder.<LookupDocument1>b__1e(IPublishedContentLookup lookup) +15
System.Linq.Enumerable.Any(IEnumerable`1 source, Func`2 predicate) +146
Umbraco.Web.Routing.PublishedContentRequestBuilder.LookupDocument1() +198
Umbraco.Web.Routing.PublishedContentRequestBuilder.LookupDocument() +195
Umbraco.Web.Routing.PublishedContentRequest.ProcessRequest(HttpContextBase httpContext, UmbracoContext umbracoContext, Action`1 onSuccess) +139
Umbraco.Web.UmbracoModule.ProcessRequest(HttpContextBase httpContext) +339
Umbraco.Web.UmbracoModule.<Init>b__7(Object sender, EventArgs e) +80
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +136
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +69Hi Aaronb9,
Since the issue regards ASP.NET and website deployment. I suggestion you post the question in the ASP.NET forums at
http://forums.asp.net/. It is appropriate and more experts will assist you.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Change font colour to red if value less than zero
Please forgive as I am not sure if this should go to the SQL or Application Thread..
My questions is regarding SQL in Application Express
I want to display my field (ADJ (INCL GST) in a red colour if its value is less than zero
here is SQL code
select "TW_BILL_ADJ_DATA"."CUSTOMER" as "CUSTOMER",
"TW_BILL_ADJ_DATA"."ORIGINATER" as "ORIGINATOR",
CASE WHEN (CREDITDEBIT) = 'Credit' THEN (0 - ADJUSTMENT_INCL_GST) ELSE ADJUSTMENT_INCL_GST END "ADJ (INCL GST)"
from TW_BILL_ADJ_DATAThankyou for the example above, after much searching I have also found another way to perform the same task
select "BILL_DATA"."BILLING_CODE",
CASE WHEN (CREDITDEBIT) = 'Credit' then
'<span style="color:Red;">'
|| TO_CHAR (0 - "ADJUSTMENT_INCL_GST", 'FML999G999G999G999G990D00')|| '</span>'
else
'<span style="color:Green;">'
|| TO_CHAR ( "ADJUSTMENT_INCL_GST", 'FML999G999G999G999G990D00')|| '</span>'
end "Adj (incl GST)"
from TW_TABLE
----------------------------------------------------------------------------------- -
Control account balance isn't less than zero
Dear buddies:
I wanna control that account balance isn't less than zero when entering G/L document. I remember there is a warnning message for bank account, but I forgot how to configurate it!
Please you help me, thanks!
sherkyHello
Not sure what customizing you refer to but you can do this control trough a validation at complete document level.
Regards
Javier -
hi
i have a scenario
where i get the free of cost material form customer
i add the conversion,the scarp generated m
if i use the scrap generated as credit the cost estimate is negative
but i should bcz this is a sfg and it fits into aonther FG and the customer do concder the scrap generated credit during pricing
but at the sfg level the cost estimate is negative.how to do this .maintain the Activity rates "zero" in KP26 for respective Cost center and Activity type.
Material cost comes from Material master.....there we need to have zero price
and try to run the CK11N, you have the chance to get the zero cost estimated.
No idea how it works....do some R & D in DEV
Thanks -
Need to add leading zeros to the field if field length is less than 6
Actually the field length is 16.
But for some manual entries it is comming as 4 chars.
so if field length is less than 6 then it should be replaced by leading zeros.
Moderator message: very basic, please (re)search yourself before asking, @all: please do not reply to basic questions, points removed.
locked by: Thomas Zloch on Sep 9, 2010 11:43 AMHi Ravi,
Do it in 2 steps.
1. check the length of your entry by strlen function and get the length.
2. If the output is less than 6 call the FM CONVERSION_EXIT_ALPHA_INPUT to get leading zero
Regards,
anirban -
If less than replace with no value or zero
I'm trying to use the diadem calculator to create the equivalent of a 'if less than 4.0 replace with no value or 0' for the complete cell count of a named channel . Either create a new channel for the result or replace the old values
thanks
AdeKHi Adek,
Twigeater is absolutely right, as always, and he's pointed you to the most recent and syntax-friendly option available in DIAdem 11.0 and later.
If you are using an older version of DIAdem, or if you're manipulating very large channels, I'd recommend using the old "FormulaCalc()" function, which is faster for numeric channels and has a boolean construction that automatically resolves to 0 or 1, corresponding nicely to what you want. Here's the code:
R1 = 0.2L1 = CNo("Noise data/Noise_1")Call FormulaCalc("Ch(L1):= (Ch(L1)>R1)")Brad Turpin
DIAdem Product Support Engineer
National Instruments -
Qty in Confirmation of Service is less than Delivery Quantity
Hi All,
I am trying to find the rootcause of a situation with our delivery document, hope you could help.
In our delivery, we have TAX "Non Stock Item" line items (no Movement Type); and for these kinds of items, I understand that:
1) They do not check stock, and you can do PGI without any stock
2) Upon GI, these generate "Confirmation of Service" entries in the document flow (whereas Standard Items, with Movement Types attached, generate a material document)
3) Unlike zero-delivery-quantity parent line items of batch splits, who also generate Confirmation of Service entries upon GI, our TAX items actually have a non-zero delivery quantity
4) The TAX items are not relevant for picking, so there is a delivery qty, but then there is 0 pick qty
The issue I am having is that for one of the TAX items, the Quantity in the Confirmation of service is less then the Delivery Quantity. That is, when I go into the document flow:
a) The delivery line item has 55 units
b) The Confirmation of Service has only 24 units
c) The Invoice has 55 units again for this item
What's weird is that, if TAX items do not check stocks at all, why did the qty in the confirmation of service become less than the original quantity that is specified in the delivery?
Another unusual behavior i am seeing (may or may not be related to the above) is that the delivery is already invoiced but the delivery's doc flow status is still "being processed" (and not "completed"). This may be because of the above issue, but I see the TotalGdsMvtStatus of the delivery as C "Complete" - which may be why the invoice was possible.
Hope you could help provide some insights. Thanks!
Regards,
StephenHi Arakish,
Thanks for the inputs:
you checked: delivery picked qty is showing zero (no one entereed 24 in error)?
-> yes picked qty is 0 and the change logs do not show otherwise
there is only the one confirmation not two for that tax item in the doc flow?
-> yes there is only one confirmation of service entry in the doc flow, with 24 units
there is no descrepency in units of measure? (meaning it's not EA in one place but UPK or something strange like that else where)
-> yes the UoMs are all in KEGs
Another observation is that for the delivery status overview, the goods movement status of each of the line items is also C/Green (including my TAX item). The total goods movement status (header) is also C/Green
Hope you could shed more light. Thanks!
Regards,
Stephen -
My iPod Touch [gen 3] battery suddenly is lasting less than an hour.
I've had my iPod since the summer of 2010. It's worked fine up until the last week or so. My original cord's white covering started to fray and you can see the silver wire protection, so I bought a new one. That one worked fine, but then it started giving me a screen on my iPod that said "Charging is not compatible with this accessory." And about three months ago, that cord just stopped working all together. So, I switched back to my original after putting electrical tape on it and it charges with no problem now. Well, now it's three months later and my iPod is suddenly only holding a charge for less than an hour. I put it on the charger when I go to bed, and take it off when I wake up. The only other time it goes on my charger is when it dies suddenly, or if I'm listening to it in my car because it charges it automatically when I plug it in through the USB cord to my CD player in my car. But, I'm really ticked off that it's already breaking because it's only 2 years old, and I can't afford another one.
Does anyone know what could possibly be making my iPod die so fast? I have notifications turned off of most of my apps, the only exception is Draw Something, Facebook, and Words With Friends. I have my brightness at the medium setting. And I've deleted a lot of apps this morning in case that was the problem. I don't listen to music that often on it, when I do it's when I plug it into my car. I mostly play games and stuff, but I took it off the charger an hour and fifteen minutes ago, and within 45 minutes I got the notification that I had 20% battery left.1. Check the cycle count of the battery. It may be due for replacement.
2. If not, follow these instructions.
3. You can also try resetting the SMC.
4. Make sure your system is up to date in Software Update.
5. Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed. -
How to send a ttl signal with a good exactitude less than 10ms?
i have a pci 6013 (8 input channel) and pci 6711 (4 outpout channel).Then i need to send a ttl signal to a camera ccd to take a photo when a waveform sinus is equal at zero (rising), but when i send this TTl signal with dasylab using generator pulse or combi trigger and readind this signal, i have difference between dasylab pulse(that is exactly) and measurement pulse that is approximate 40ms after.But i need to have less than 10ms is it possible?
Frequence rate =1000hz and block size=512 the waveform sinus is 0.2Hz.i have already try to increase the sampling rate but nothing happens.Thank for your help.Yes, it's possible.
You just have to reduce your block size to 10 !
For more informations, visit Forum Dasylab en français at http://forum.aceboard.net/?login=128657
Frédéric Miqueau
MD Electronic, France
http://www.mdelectronic.fr
French Dasylab Forum : http://www.dasylab-forum.de/forum/index.php?showforum=43 -
Is this a lemon? How should Lenovo handle this?
Hello. From very beginning, shortly after purchase, V570 overheated (80-90 degrees Celsius, with screen shots of core temps as proof). Problem went on for several months, burning leg at one point. I called tech support, no call back and no repair scheduled. Kept notes, dates and times of all contact.
I had purchased next day on-site repair service for three years. So when no one called back about problem after ten days, I called back and raised a little pleasant ruckus. Got some action.
On-site tech installed more powerful fan. Helped out with high temps. Tech recommended motherboard to be replaced, since it was probably fried from overheating.
Then, the HDMI port no longer worked. Lenovo took more than a week on this repair. Parts were sent to a technician who was no longer in business, so parts were in Fed Ex limbo. I spent 10 hours on phone (5 hours to the Philippines) trying to straighten out the mess.
Problem escalated. No one from North Carolina or Texas ever calls back. No. Call. Back.
You can imagine my trust factor with Lenovo is zero now.
New mainboard installed. Works fine. Tech leaves. Two hours later, screen is completely black. Nothing. Dead darkness dead dead. Cannot power on. No tricks with power button, recovery button or anything else working.
Called support again about dead machine. Sending out another mainboard for another repair. I do research and realized this is the bad bad bad motherboard that *everyone* here is complaining about. Lots of other dead black screens from it. So, again another two hours on the phone.
Then, I call tech in Philippines back, and say, hey, this is the mainboard that is riddled with problems -- I really do not want to go through this again. They recommend another mainboard, but it's a slower one -- an i5 dual core instead of quad core.
At this point, we're three or four mainboards in, in terms of repairs that have happened and parts coming, on a machine less than a year old.
At what point does Lenovo make the financial or business decision that the best option is to replace the machine rather than paying for four motherboards and on-site repairs?
And, BTW, when I pay hundreds of dollars for a 3-year on-site next-business-day repairs, I mean ON-SITE, NEXT BUSINESS DAY. That's what my contract says, in writing -- I've got it in front of me. That doesn't mean 2-3 business days that all the techs are saying to me.
I've even had several techs say I need to send in my machine, and I say, uh, I have on-site repair, and they say they "need to get approval" to authorize on-site service. **bleep**??
This is the worst customer service and the poorest machines I've ever encountered.
I also have a 2-month old y570, that arrived with a broken battery bay and still the touchpad is as stiff and unusable
as Day One. Both the lower housing/battery bay and the touchpad have to be replaced or repaired.
I'm gathering that others are having as many problems with their machines as I am having with mine. And even when you pay for good service -- you don't get it.
IdeaPads bear no resemblance to the greatness of ThinkPads or the IBM of yesteryear.
Lenovo, please help.Unfortunately, the carrier that you purchased it from is where your warranty channel is. I wish I had a better answer but that is how the system works.
As I mentioned, even if you are within the warranty period and with the same carrier, the warranty is probably void since the device has been disassembled and repaired--they can tell when it's been apart. I've heard of this mirrored issue before and it's usually a hardware problem, as you've already been made aware of by the repair facility you took it to.
I hate to say it but you are probably out of luck on this one. Wish I had something better to tell you.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
I have credit and it's less than 0.99 and i need to change the region and i don't have visa
i have credit and it's less than 0.99 and i need to change the region and i don't have visa
Click here and ask the iTunes Store staff to zero your account balance.
(110223) -
Minimum in range greater than zero
I'm trying to find the minimum number in a row but I want to find a number greater than zero as the minimum not the zeros .
Badunit's remark that "Your numbers must all be >=0" led me to check all three suggestions against this possiblity. Here are the results for two data sets, one containing text, blank and negative values, the second containing only positve numbers, zero, and a blank cell.
As you can see, my procedure includes both positive and negative values, and eliminates only the zeros from contention. If your data will include negative values, and you do NOT wish to include them, they may be easily stripped from the data when it is transfered the the Aux column, in the same manner as the zeroes have been.
Stripping all values less than or equal to zero requies a minor edit of the formula in the AUX column:
Original: =IF(B=0,"",B)
Revised: =IF(B<=0,"",B)
Jerry's formula requires that it be placed into a Footer row (or a Header row) IF it is to be placed on the Data table and to use the table name ("Data") as the first argument for INDEX. INDEX ignores Header and Footer rows in arguments specifying a whole column (or a whole table).
As can be seen in column B, this formula will be thrown off (as BU has warned) by the inclusion of negative values. A revision similar to the one shown in my formula above will remove the requirement to not include negative values:
Original: =SMALL(B,COUNTIF(B,0)+1)
Revised: =SMALL(B,COUNTIF(B,"<=0")+1)
As revised, the formula will return the smallest positive value in the data list.
Badunit's formula will also show a warning triangle if there is an empty cell or a cell containing text in the data list. Annoying, but it does not affect the results. The warning is that "The formula refers to cells without numbers,"
Regards,
Barry
Maybe you are looking for
-
Hi When I try to open db the followıng error is returned startup mount; fized size ... variable size ... database buffers ... redo buffers ... database mounted ORA-03113:end of file on communication channel Here is the alert log: Instance terminated
-
I installed iTunes 64 on a Windows 7 (Home) HP Pavilion and received this error message. the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Please help!
-
My first java programming - Need some help please!!!
I have to create a simple java program which i am not good at i am ok in C but my java is quite bad. The program need to define a class called Student and with a string called StudentNAme, a integer StudentID(key), An array of 8 integers called Marks
-
Warning: 10.4.11 and PicLens don't play well
Just a heads up for everyone upgrading to 10.4.11.. If you have (the awesome) PicLens installed then you might find (as I did) that Safari no longer works after installing the system update. After running the update and restarting, I opened Safari to
-
Hi, After processing a flat file in DS, I want to move it to an archive directory. The command I'm using in a script is $G_Return_Msg = exec('bash','mv /u02/home/bobje/eric.test /u02/home/bobje/ejtestdir',8); print('== [$G_Return_Msg] =='); but it r