E4200 Web-based User Interface having problems in Google Chrome 8 web browser

Setting up a new E4200. My main web browser is Google Chrome (and Chrome has worked well with all of my other Linksys products, and that's a lot of products .
The problems:
1) The warning message that pops up (when using IE8) about changes in the Web UI breaking Cisco Connect's ability to manage the router does not appear.
2) The "DHCP Reservation" button on 'Setup / Basic Settings' does not pop-up, making it impossible to make changes to the DHCP table in Chrome. Works fine in IE8.
NOTE: The "DCHP Client" button on 'Status / Local Area Network' does work, so it appears that some pop-ups are working but not all.
NOTE: I don't customize my Google Chrome settings with regards to pop-ups and haven't seen this problem with any other site (well, except for some Oracle web applications that are years old, but those don't work in FireFox either and appear to have IE6-specific code).
Platform: Windows 7 Ultimate 64-bit, Google Chrome 8, E4200 firmware 1.0.0
(Mod note: Edited for guideline compliance.)

i use chrome and firefox but 99.8% is used on chrome. i have no issues. i do not use the cisco connect CD. it causes more harm than good. the warning is correct. you can break some things on the web based UI if you use the CD...

Similar Messages

ICR - Web based User Interface

Hello,
Does anybody knows how can I activate the ICR web User Interface?
Apparently it comes in EhP 6 but I have reviewed the content of all the EhP's including EhP7 and I cannot find anything.
Thanks in advance for your help
Regards
Isabel

Hi Ralph,
Regarding #2 some of those fields have already been added to the ICR tables via customizing, so I don't think we have to add them again with this transaction if they are already there?
#3 --> We have developed our own data extractor that takes the information from the FI tables and generates a tab delimited file to be imported into ICR. We had to do this because we are using our SAP system as the reconciliation system and we have to receive data from other entities outside our system. This extractor has been developed as a template that other entities will use to extract teh data from their SAP systems. Direct communication between the entities is not allowed for security reasons, so the only way was via file import.This Z extractor works perfectly via SAPGui but when we run it via the WEB UI it crashes and we get the error attached. We are going to use the Web UI for the first time with this project, so maybe there are some technical settings that have to adjusted or something like that, but it's only happening with this program. :-S
When we get this error the system crashes and we have restart the server.
Before this message we used to also get this other one:
Thanks a lot.
Regards
Isabel

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the pag

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

What r the steps to create task based user interface for interaction center

Hi all,
            Can any one please let me know the steps to create task based user interface for interaction center? It would be great
            if anyone can share document with step by step.
Thanks,
Baasanthi

Hi all,
            Can any one please let me know the steps to create task based user interface for interaction center? It would be great
            if anyone can share document with step by step.
Thanks,
Baasanthi

Im having problems with my safari Web browser to opening/viewing pdf files.

Im having problems with my safari Web browser to opening/viewing pdf files. I installed the 8.1.2 version But then when I click to open any PDF it says that Adobe PDF Viewer cannot find a compatible Adobe Acrobat or Adobe Reader to view this PDF. Please select one.
i can see the adobe reader but can not select it .

did you find a solution to this? my safari history is full of
explicit sites that i have not visited. i see a lot of info on how to remove it, but none on how to figure out how they got there.

Web Based User Management

Hey guys,
Any suggestions on how to have a web based user management system? I am looking for users to be able to change their user passwords from the web.
Either to the local NetInfo or the Open Directory.
Most of my users just use mail / webmail services and I want them to be able to change their passwords easily.
I have looked into Usermin (usermin.com), but wonder if there is a better solutions.
Appreciate the help,
Tommy.
G5 PowerMac Mac OS X (10.4.7)

Does this application do what you want?
(14223)

Google Chrome Web App

Ich habe mir Ski Safarie aus dem Google Chrome Web App runtergeladen. Dies ist ein Online-app. Welches Programm muss ich runterladen um dies spielen zu können??
http://lostforgames.com/games/ski-safari/?play
das ist der Link zu diesem Spiel.

December 2014, Microsoft released a CU that blocked LWA and displayed "Google Chrome no longer supports Lync Web App":
https://support.microsoft.com/en-us/kb/3025563 in preparation for Chrome blocking NPAPI plugins in January 2015.
February 2015, Microsoft released a CU to bring back the functionality:
https://support.microsoft.com/en-us/kb/3038437 by working around the Chrome blocking of NPAPI plug-ins and prompting the user for an "External Protocol Request" acceptance.
As of Chrome version 42 (April, 2015), the default setting is to disable NPAPI. Scott has a great blog posting about this and workarounds:
http://blogs.technet.com/b/scottstu/archive/2015/04/16/potential-impact-on-lync-and-skype-for-business-meeting-join-experience-when-google-chrome-is-the-default-browser.aspx
The removal of NPAPI from Chrome was first announced in September 2013 and my understanding is the new Skype For Business Web App Plug-in doesn't use this API anymore. I've joined a few Microsoft meetings using the new Plug-in and have had no issues in Chrome.
That being said, until the server product is released you can never be sure what will be included at RTM.
Additional details of NPAPI:
http://venturebeat.com/2014/11/24/google-chrome-will-block-all-netscape-plugin-api-plugins-in-january-drop-support-completely-in-september/
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

"Shockwave Flash plug-in has crashed" in Google Chrome Web Browser

Hi,
I keep getting the following message when using Google Chrome web browser:
"The following plug-in has crashed: Shockwave Flash"
When I start using Google Chrome, Flash is working fine but normally after about 15 minutes usage I get the message. If I close down Google Chrome and start again, Flash is working fine again for a little while and then crashes again. I have to say it is now getting quite annoying as I do prefer to use Google Chrome to Internet Explorer for various reasons but it never crashes in Internet Explorer. Is there anyone that can help me with this please?
I am using a Sony Vaio VGN-FZ38M laptop and my operating system is Vista. I am also using the latest version of Google Chrome.
Thanks
Sue

Thanks for your comments eidnolb.
I have gone to the test site for each of the browsers I use; Mozilla Firefox, Internet Explorer and Google Chrome. For each one, they display the animation and the correct, most up-to-date version of Adobe Flash Player.
With regard to the adblock/adblock plus for Chrome, I do not know what you are referring to as I cannot find any reference to adblocks in the tools menu. It's certainly not something that I have intentionally turned off or on so it will be at whatever default setting Chrome comes with.
The Shockwave Flash plugin is enabled for all 3 browsers which is, I guess, why I am seeing the animation. Unfortunately, with Chrome the Shockwave Flash will eventually crash whilst I am using it. Do you have any further thoughts on why it might be crashing please?
Cheers
Sue

Firefox is having problems in opening some Web Sites

== Issue
==
Firefox is having problems with certain web sites
== Description
==
When I open my Home Page, I get the following message: A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: http://04.nscdn.optusnet.com.au/common/js/30062010/app.main.js:1415
== URL of affected sites
==
http://optuszoo.com.au
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Microsoft .NET Framework Assistant
1.1
false
{20a82645-c095-46ed-80e3-08825760534b}
ZoneAlarm Toolbar
1.5.53.4
false
MSN Toolbar
4.0
false
[email protected]
Search Helper Extension
1.0
false
{27182e60-b5f3-411c-b545-b44205977502}
Adobe DLM (powered by getPlus(R))
1.6.2.63
true
Modified Preferences
Name
Value
browser.history_expire_days.mirror
180
browser.places.smartBookmarksVersion
2
browser.startup.homepage
http://www.optuszoo.com.au/
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
network.cookie.prefsMigrated
true
places.last_vacuum
1276732365
privacy.cpd.formdata
false
privacy.cpd.sessions
false
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-getplusplusadobe16263
*Google Update
*Adobe PDF Plug-In For Firefox and Netscape

I had posted the problem previously & accidently marked the problem as solved.
I received the following message since:
"I am not sure how my previous post solved the problem but since then I think I have found the answer.
I simply enabled Shockwave Flash 10.0.32.18
From the Firefox Homepage it is located under:
Tools\Add Ons then select the PlugIns Tab
Select Shockwave Flash then enable it.
Regards,
Phil "
This has fixed the problem. Thanks Phil.

Web-based user management tools???

Are there any pre-packaged or off-the-shelf tools one can use to manage unix users and groups in DS 5.2? (preferrably web based) I have found a few open source apps that are web-based but they don't seem to be production quality.
For now, I'm creating LDIF files and importing them or using the GUI console. This is tedius and the other sys admins that aren't familiar with ldap will find it difficult.
One of the open source tools I found was "Directory Administrator" which runs only under gnome, we don't use gnome.
Another tool is "LDAP Account Manager" which was originally built to manage samba users and their unix user/group attributes. We don't use samba and this application does not allow you to seperate the samba and unix components.
There has to be a simple web-based tool for managing unix users/groups. If any of you know of a commercial or free app, please let me know.

I urege to to take a look at phpldapadmin, an open-source php/web based tool for managing ldap/directory servers. We have been using it for over a year now, and find that it is easy to install, works well, and continues to receive updates on a periodic basis. Another nice thing is that since you have the php source, it's easy to modify for local modifications.
You can find it at:
http://phpldapadmin.sourceforge.net/

Fundamental User Interface Refreshing Problem with Acrobat X

After installing Acrobat X (both
Reader and Standard) I got the problem that over time the refreshing of user interface elements stops,
which means that Acrobat gets into a state, where you can't see parts of the toolbar (and search button) any longer.
I'd assume that this might have to do something with my combination of operating systems, grafic chip and or the
new user interface framwork Acrobat uses now (I guess at least it changed, but don't know details).
Updating to the newest grafics driver didn't help.
This problem only occurs in Acrobat X applications on my machine.
Does anybody have the same problem?
Does anybody have an idea what might go wrong?
Here is my data:
- Windows 7 Pro
- NVIDIA Quadro NVS 135M
BTW, it seems I can't switch back to Acrobat Std 9 because after installing Acrobat X with a new
serial number, the old number is reported as invalid if I remove Acrobat X and try to install Acrobat 9 again.
So, if somebody has a solution there...

Anyone have any ideas?James

Does the UC540 include or support a web based user portal?

One last question because I can't find this for the life of me. When looking at Avaya IP Office they include a web based portal that is installed on a server or on their server module for the system. Does the UC540 include that or allow that function at all? Basically I'm trying to find out if it includes or supports even via add on a user portal where users can log in, see their call history, listen to voice mails, possibly see who is on the phone, and if possible change their call flows from there. So for example set that they are working from home vs the office. Is that built in or supported or anything at all? Thanks so much!

The thing I'm just not clear on is what the UC540 includes, as I'm comparing it to Avaya IP Office which seems easier to understand. A user portal isn't that big of a requirement but I'm more wondering how it works for teleworkers or mobile twinning as Avaya calls it.
For example, one place says buy the UC540 for $1899. Just using it as an example, lets say I was to buy that.
Am I able to set it so that:
1) If working remotely, calls ring on my desk and mobile at the same time, like Avaya's mobile twinning? And if so, is it something users can enable or disable easily, either from their phone, or a web portal etc?
2) If I am on the road, Avaya has the one-x iPhone application, where you launch it, dial a number, it calls into the Avaya PBX, and makes an outbound call showing it's my office calling. So basically DISA. I don't need an application for that, but does the UC540 support calling into it and dialing out so it shows the office line calling?
3) Last and most importantly, does it include built in any ability for a softphone so that a user can work from home one day, launch the softphone on their laptop with a USB headset and then make calls and have incoming calls ring there as well?
We use Asterisk, so we can do the above right now but it's not really pretty. Like option 1 above is possible and easy to do. Option 2 is so so, it's def not as easy as the one-x app by Avaya. Instead users have to call our main line, dial a code at the IVR and then get an outbound line that shows their caller ID. So each user needs that manually set up in the system, it's not a built in feature. Then option 3 is possible but also not ideal as the soft phone needs its own extension and then ring groups are needed to ring their line to all their extensions etc.
Just comparing the Avaya to Cisco and I'd REALLY prefer the Cisco it's just the Avaya seems to handle the above better which is our main features we want so just trying to determine if the UC540 can do this out of box and if not what I'd need to enable it. Thanks!

I'm Having problem sharing to the web?

fcpx Imac 16gb ram. I'm having a problem sharing to the web. Even with projects that I succesfully shared in the pass on vimeo. now nothing works. I tried to upload from vimeo and it didn't work either.
When I share it goes in waiting mode and stay there for houres and nothing ever happen. Help please
John

Have you tried closing the Settings and Contacts apps completely and seeing if they work ok when re-open them ? From the home screen (i.e. not with Settings or Contacts 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Settings and Contacts apps to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Anyone having problems with YouTube app/web?

on wifi I've tried to watch several different videos from the YouTube app and YouTube through safari... when connected through wifi the video loads 1-4 seconds of the video and stops. if I press play it'll play another couple seconds and stop again. I can load the same video via wifi on two different desktops (1 Mac, 1 win7), my MacBook... and that same video will load in it's entirety while I'm playing it through 3G... just wondering if anyone is having similar problems or issues with YouTube. any help/suggestions would help. I've already tried resetting my network connections on the iPad and that did not help. I've had no problem with my wifi connection browsing the web or even streaming music... problem only occurs with YouTube.

Exact same problem. Sorry I have no solution - also not sure where the needed fix will be, i.e., OS, or the apps (or worst case, the device itself) Many posts here and there on the boards and also articles in the press. some have suggested proximity to the router helps - am not at home, so I can't test that out. It doesn't help longterm but would be great to have some workaround for the near term, however limited.
There is another, even worse behavior where the device freezes when streaming video and requires a hard reset. Folks are doing returns for that one,usually tied to replicating the behavior at the store. A system restore does not help but some stores make you go through that step. However, this does not sound like your problem.

Adobe Muse, using an adobe edge web font but having a problem with Google Chrome

I have created a website with Adobe Muse and I am using an adobe edge web font that looks great on all browsers except for google Chrome... On chrome the font looks fuzzy and broken-up. Is there a way to fix this??? Thanks.

This is the error:
Add-ons: {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}:1.3.3,{097d3191-e6fa-4728-9826-b533d755359d}:0.7.12,[email protected]:1.2,{d40f5e7b-d2cf-4856-b441-cc613eeffbe3}:1.48.3,{CE6E6E3B-84DD-4cac-9F63-8D2AE4F30A4B}:3.2,{3112ca9c-de6d-4884-a869-9855de68056c}:7.1.20101113Mb1,[email protected]:1.72.0,[email protected]:1.2,{36450ee9-67e2-46a0-8a90-eabde5d74e28}:1.300.306,[email protected]:2.2.0,[email protected]:3.60,{29c4afe1-db19-4298-8785-fcc94d1d6c1d}:0.6.2009110501,[email protected]:1.6,[email protected]:1.1.3,vshare@toolbar:1.0.0,{972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.13
BuildID: 20101203074432
CrashTime: 1298598340
EMCheckCompatibility: true
Email:
FramePoisonBase: 00000000f0dea000
FramePoisonSize: 4096
InstallTime: 1291988448
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 6558
StartupTime: 1298598134
Theme: classic/1.0
Throttleable: 1
URL: https://mail.google.com/mail/?shva=1#inbox
Vendor: Mozilla
Version: 3.6.13
This report also contains technical information about the state of the application when it crashed.

E4200 Web-based User Interface having problems in Google Chrome 8 web browser

Similar Messages

Maybe you are looking for