E5 problem after inserted headset

guys need some help. after listened to radio on my e5 phone, using the headset, i remove the headset, but when i made/ receive call, people can hear my voice but extremely slow like i put the phone far from me. when i inserted back the headset, its working fine. now i have to use the headset to receive or make phone call. tis is my first time insert the headset to my phone.
please help!! thanks

no diff..i've put it to max aledi..now either i've to use the headset, or shout on the phone, so the other side can hear me

Similar Messages

Problem after using Headset

Hi
I bought a new headset for my Blackberry Curve 8520. I plugged in a sony erricson headset first. I tested it and it worked fine. Once i disconnected it my phone started behaving very funny.
You know how an icon appears top left of the phone while a call is active? that icon now started fluctuating. So it would be the phone sigh with 2 arrows (which indicates on call on phone) and another second it would change to the headset icon (the one which appears when the headset is connected)
I cant even put my phone on spearphone any more!
I cant use my phone any longer without the head set connected.
Please help!
It is so annoying that I swear to never use headset again for my phone.
My worry is hif connecting a sony ericson head set spoiled something in my phone.
The shop keep phone had categoricaly mentioned that it will not create any problem with a blackberry.
HELP!
Poonam

I have this problem too. Auto lock is off and Siri can be used from the lock screen but this defeats the purpose of hands free usage for example when you are on a bicycle and can't use the phone normally. After sending a message or a reply to one Siri locks the phone and you cannot hear new messages until you unlock the phone which can be potentially dangerous!
I'd love to see if there is a solution as I can't see any option in settings (either Siri settings or pass lock settings) to fix this.

Font problem after inserting date/time.

Can anyone help me with this problem? I write a daily journal in Times New Roman, 18 pt. However, when I have it insert the date and time it inserts it fine as TNR 18. But if I type the very next character it is TNR 10 pt. How do I prevent this?
Thanks.
Paul

Paul, did you by chance change the Body text Paragraph Style to TNR 18? Or is it still set to 10?
If it is set to 10 then while the Date and Time are going to be 18, Pages is reverting back to the normal Body paragraph Style, which is probably 10.
You can get around this by changing your body style, or making a new one called "Entries" which is set to 18.

Speaker Problem After Inserting My Xperia Z1 Into Water...

3 Days Back i 've Dipped My Xperia Z1 Into Water And..after that waiting 3 hrs To get My Speaker rid of from Water I Wanted To Hear Sound in Phone...as i've Started The Speker Volume Became very low..Can't Hear it so good as before..it's been Low from Earpiece also..!! Please.Help..!! And Its Still Very low..

Three days is something,it should have dried up already.How about you have the phone checked at a sony service?
http://www.sonymobile.com/global-en/support/contact-us/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Problem after inserting animations

Whenever I insert an animation into a Captivate slide, the
drop-down menus for Captivate become very unstable; they won't stay
down long enough to make a selection. So I can only save the
project and close, then reopen. Very frustrating. Any ideas?

Hi al;dfkjW;DFLHWDVD and welcome to our community
Try clicking any object in the Library pane and Captivate
should begin behaving again. It's got something to do with the fact
you have Flash Player 9 installed.
Cheers... Rick

Problem in Insertion into table through After Report Parameter form trigger

Hi All,
I am getting problem in inserting some data into temp table through Report.
My requirement is like that, I have to do a calculation based on user parameters, and then insert the data into the temp table. I wanted to do this into After Report Parameter form trigger function. I have done all the calculation and wrote all the insert statement in that function. There is no problem in compilation. then I am taking value from this temp table in my formula columns.
When I run this report, it hangs, don't understand what is the problem.Can anybody help me out in this.
Thanks,
Nidhi

The code is as follows:
function AfterPForm return boolean is
CURSOR CUR_RECEIPT(RECEIPT_NUM_FROM NUMBER, RECEIPT_NUM_TO NUMBER) IS
SELECT DISTINCT receipt, item_no FROM xxeeg.xxeeg_1229_sp_putaway WHERE RECEIPT BETWEEN
RECEIPT_NUM_FROM AND RECEIPT_NUM_TO ;
V_CUR_RECEIPT CUR_RECEIPT%ROWTYPE;
begin
OPEN CUR_RECEIPT(:RECEIPT_NUM_FROM, :RECEIPT_NUM_TO);
FETCH CUR_RECEIPT
INTO V_CUR_RECEIPT;
LOOP
EXIT WHEN CUR_RECEIPT%NOTFOUND;
IF V_CUR_RECEIPT.ITEM_NO = 'TEST1' AND V_CUR_RECEIPT.RECEIPT = '12' THEN
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 12
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 13
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 14
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
ELSE
IF V_CUR_RECEIPT.ITEM_NO = 'TEST2' AND V_CUR_RECEIPT.RECEIPT = '12' THEN
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 16
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 17
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO =V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 18
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
ELSE
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 19
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 20
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO =V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 21
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
END IF;
END IF;
END LOOP;
COMMIT;
CLOSE CUR_RECEIPT;
return(TRUE);
end;
.....................................................................................................................

Problem with a field set to refresh after insert at Row level

hello all,
i have a problem with a field (a serial) which is set by a db trigger at insertion. The field "refresh after insert" is properly set in the Entity and everything is refreshed correctly when i insert data via an adf form in a jspx but when i want to insert programmatically nothing is refreshed. I insert data this way :
ViewObject insertVO = findViewObject("myView");
Row newRow = insertVO.createRow();
newRow.setAttribute("mandatoryAttribute1",value1);
newRow.setAttribute("mandatoryAttribute2",value2);
<more init here but not the serial since it will be set by the DB trigger>
insertVO.insertRow(newRow);
but when i want to get back the value with "newRow().getAttribute("TheSerial");" i always get a null back and not the value set by the db trigger.
One way to get the serial is to commit after each insert but i don't want to commit between inserts.
i've tried to unset the refresh after insert and override the createDef() method to setUseReturningClause(false) as it's is advised in chapter 26.5 of the ADF 4GL dev. guide but in this case i have an exception JBO-29000: JBO-26041.
How can i get the value back properly ?
thanks
-regards

The data for the newly created row doesn't get inserted into the database until the commit is executed, so the insert trigger isn't called.
If you need to get the value without committing, then you should implement the trigger programmatically and drop the trigger from the database. The code below shows how you could do this.
ViewObject insertVO = findViewObject("myView");
Row newRow = insertVO.createRow();
SequenceImpl seq = new SequenceImpl("MY_SEQ", insertVO.getDBTransaction());
Long next = (Long)seq.getData();
newRow.setAttribute("primaryAttribute", new Number(next));
...You will need to replace MY_SEQ and primaryAttribute with the correct values for your example, but this should acheive what you want.

Sim problems- I updated my ipad2 to ios7 after that , iam facing problems with my sim, it showing no sim card after inserting sim. there is no prbolem with my sim.

I updated my ipad2 to ios7 after that , iam facing problems with my sim, it showing no sim card after inserting sim. there is no prbolem with my sim.

arun kumar chenna123 wrote:
i have updated my iphone to ios4.1. after installation, it is showing as"The SIM card inserted in this iPhone does not appear to be supported. only compatible sim cards from a supported carrier may be used to activate iphone. Please insert the sim card that came with your iphone...."
how to solve this problem. I don't have any sim cards that came with iphone.
Please help out to solve this problem.
It sounds like the phone was hacked or jailbroken, and updating it locked it to the original carrier. As it is not possible to update to any version other than the current one (5.1) the fact that you updated to 4.1 pretty much confirms the phone was hacked. There is no solution that you can get in an Apple forum.

I am using Apple iphone 3gs and having a problem of no services after inserting sim card

I am using Apple iphone 3gs and having a problem of no services after inserting sim card, how to resolve it?

Follow this article below it will tell you step by step what to do.
http://support.apple.com/kb/ts4429
If you're still experiencing No Service, contact your carrier to check for any network or account issues that could cause these problem.

After insert trigger problem

I am trying to write a trigger which will update a date col after every insert////
CREATE OR REPLACE TRIGGER PS1.XX_CDATE
AFTER INSERT ON ps1.COMMNPLANBUDGET
REFERENCING OLD AS old NEW AS new
FOR EACH ROW
declare PRAGMA AUTONOMOUS_TRANSACTION;
BEGIN
update ps1.COMMNPLANBUDGET set CREATION_DATE=sysdate where PROJECTID = :new.PROJECTID;
commit;
END XX_CDATE;
For the same i have written the above code, it created successfully but when i am inserting a record the date col is not getting updated. Please let me know where i have done wrong. Thanks in advance

Hello
You should not use autonomous transactions in a trigger. Do not do it, and if anyone tells you to use autonomous transactions in a trigger to avoid mutating table exceptiosn, you should instruct them to put their hands in a toaster, switch it on maximum and insist they keep them there until the timer reaches zero.
Anyway, if the primary key on this table is project ID, you don't need to go to these lengths. You can simply
CREATE OR REPLACE TRIGGER PS1.XX_CDATE
BEFORE INSERT ON ps1.COMMNPLANBUDGET
REFERENCING OLD AS old NEW AS new
FOR EACH ROW
BEGIN
:NEW.creation_date := sysdate;
END XX_CDATE;If project_id is not the primary key, why would you update the creation date for all rows attached to the project id?
David
Edited by: Bravid on Sep 22, 2011 9:29 AM
Oops, after reading Karthik's post, I realised I left the AFTER insert in the trigger spec. Updated it to BEFORE.

Using Database Change Notification instead of After Insert Trigger

Hello guys! I have an after insert trigger that calls a procedure, which in turn is doing an update or insert on another table. Due to mutating table errors I declared the trigger and procedure as autonomously transactional. The problem is, that old values of my main tables are inserted into the subtable since the after insert/update trigger is fired before the commit.
My question is how can I solve that and how could I use the change notification package to call my procedure? I now that this notification is only started after a DML/DDL action has been commited on a table.
If you could show me how to carry out the following code with a Database Change Notification I'd be delighted. Furthermore I need to know if it suffices to set up this notification only once or for each client seperately?
Many thanks for your help and expertise!
Regards,
Sebastian
declare
cnumber number (6);
begin
select count(*) into cnumber from (
select case when (select date_datum
    from
      (select f.date_datum,
        row_number() over (order by f.objectid desc) rn
      from borki.fangzahlen f
      where lng_falle      = :new.lng_falle
      and int_fallennummer = :new.int_fallennummer
      and lng_schaedling   = :new.lng_schaedling
      and date_datum       > '31.03.2010'
    where rn=1) < (select date_datum
    from
      (select f.date_datum,
        row_number() over (order by f.objectid desc) rn
      from borki.fangzahlen f
      where lng_falle      = :new.lng_falle
      and int_fallennummer = :new.int_fallennummer
      and lng_schaedling   = :new.lng_schaedling
      and date_datum       > '31.03.2010'
    where rn=2) then 1 end as action from borki.fangzahlen
        where lng_falle      = :new.lng_falle
        and int_fallennummer = :new.int_fallennummer
        and lng_schaedling   = :new.lng_schaedling
        and date_datum       > '31.03.2010') where action = 1;
if cnumber != 0 then
delete from borki.tbl_test where lng_falle = :new.lng_falle
and int_fallennummer = :new.int_fallennummer
and lng_schaedling   = :new.lng_schaedling
and date_datum       > '31.03.2010';
commit;
pr_fangzahlen_tw_sync_sk(:new.lng_falle, :new.int_fallennummer, :new.lng_schaedling);

It looks like you have an error in line 37 of your code. Once you fix that the problem should be resolved.

A lot of problems after installing Windows XP using Boot Camp on a Mac Book

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
~Twilight

---I'm moving this topic to the Boot Camp forums.
-Twilight

Error in after insert trigger

Hello all,
I have a question about after insert trigger. Will be new row inserted and commited if after insert trigger returns error? Thank you.
regards,
Miha

What is the error that u r facing?
there could multiple reasons for that. Basically, u can't put commit in the trigger (unless it is an autonomous transaction). Share the pseudo-code of u r triiger, so that , problem can be identified.
Cheers,
Ram Kanala

AFTER INSERT TIGGER, ora-01403: no data found error

Hi all,
I'm trying to create a fairly simple trigger which fires after an insert on a table.
The trigger is based on a function, defined within a package. The function is as follows...
FUNCTION check_contract_length (V_playerId IN NUMBER)
RETURN BOOLEAN
IS
months NUMBER;
months2 NUMBER;
BEGIN
SELECT months_between(contract_end, contract_start), contract_length
INTO months, months2
FROM player
WHERE playerId = v_playerId;
IF months <> months2 THEN
RETURN (true);
END IF;
RETURN (false);
END check_contract_length;The trigger operates when an insert is made on to the player table, it as defined as follows...
CREATE OR REPLACE TRIGGER play_ins_con
AFTER INSERT ON player
FOR EACH ROW
DECLARE
isover BOOLEAN;
BEGIN
IF INSERTING THEN
isover := player_constr_pkg.check_contract_length(:new.playerId);
IF isover THEN
RAISE_APPLICATION_ERROR(-30001, 'Contract length incorrect');
END IF;
END IF;
END play_ins_con;My problem is, is that every time I try to insert a row into the player table, the trigger fires and produces a "ora-01403: no data found" error. I was under the impression that as the trigger fires after an insert, this shouldn't be a problem.
I'm also aware that this constraint can probably be implemented using a CHECK constraint, however it would be a learning curve for me to work it out this way.
Any help would be much appreciated!!
Cheers guys.

I'm also aware that this constraint can probably be implemented using a CHECK constraint,
however it would be a learning curve for me to work it out this way.Starting out by doing stuff the wrong way only increases the learning curve when it comes to doing things the right way. A check constraint is definitely the best way of doing it. However, if you must do it with a trigger this is the way to go:
CREATE OR REPLACE TRIGGER play_ins_con BEFORE INSERT ON player
FOR EACH ROW
BEGIN
    IF months_between(:NEW.contract_end, :NEW.contract_start) <> :NEW.contract_length
    THEN
        RAISE_APPLICATION_ERROR(-30001, 'Contract length incorrect');
    END IF;
END play_ins_con;
/Incidentally, as CONTRACT_LENGTH is wholly derivable from the other columns your table structure is obviously insufficiently normalised.
Also, note that only errors between -20999 and -20000 are reserved for our use. Any other number may be used by Oracle for its own purposes.
Cheers, APC

Height of a Tile (or orther container) not changed after inserting nodes

Hi,
I am a javafx beginner and I'm struggeling with the size of the containers. Here is what I try to do:
I am making a photo gallery in which an Album can contain subalbums and photos through which a user can scroll. The Album objects are stored in a Tile, the Photo objects in another Tile. These Tiles I want to display vertically in a VBox, which is in turn placed on a Clipview. Now my problem is: the height of the Tile is not changing when I insert Photos or Albums in the Tiles. And I need these heights (or that of the VBox) to do calculations for my scrollbar. When I print the bounds for the album Tile before inserting Album objects everything is 0, which is correct. But when I print the bounds after insertion of 10 Albums the height is given as the height of only 1 Album, even without hgap and vgap. The height of the VBox is also equal to this height of 1 node.
What am I missing here? How can I get the correct height to use for my scrollbar calculations?
I hope you can help me out, because it's hunting me for days now :-)
Thanx,
RedMary

Well, that's one of the mysteries of JavaFX: the initialization order... :-)
When you create the custom node, it is not yet in layout, so the tile isn't laid out either, and its dimensions aren't final.
If I add a button to the scene to dump the data, you can see the final dimensions.
I also tried a trick this week-end, to override doLayout to know when a node have been laid out. A quick test shown mixed results, but perhaps it can be a starting point.
class Gallery extends CustomNode {
    var albumList = Tile {
        width: 1000
        vgap: 25
        hgap:25
        content: []
    var photoList = Tile {
        width: 1000
        vgap: 25
        hgap:25
        content: []
    var box = VBox {
        spacing: 50
        content: [albumList,photoList]
        override function doLayout(): Void
            super.doLayout();
            ShowData("After B layout");
    public override function create(): Node {
        ShowData("Before insertion:");
        for (i in [1..10]) {
             var rect = Rectangle {
                 width: 100;
                 height: 100;
                 fill: Color.RED;
             insert rect into albumList.content;
         for (i in [1..15]) {
             var rect = Rectangle {
                 width: 100;
                 height: 100;
                 fill: Color.WHITE;
             insert rect into photoList.content;
        ShowData("After insertion:");
        var group = Group {
            content:[box]
            override function doLayout(): Void
                super.doLayout();
                ShowData("After G layout");
        return(group)
    function ShowData(msg: String): Void {
        println("==> {msg}");
        println("albumList LayoutBounds:{albumList.layoutBounds}");
        println("albumList BoundsInLocal:{albumList.boundsInLocal}");
        println("albumList BoundsInParent:{albumList.boundsInParent}");
        println("box LayoutBounds:{box.layoutBounds}");
        println("box BoundsInLocal:{box.boundsInLocal}");
        println("box BoundsInParent:{box.boundsInParent}");
Stage {
    title: "Application title"
    width: 1000
    height: 800
    var gallery = Gallery {}
    scene: Scene {
        width: 1000
        height: 800
        fill: Color.BLACK;
        content: [
            gallery,
            Button {
                text: "D"
                action: function (): Void {
                    gallery.ShowData("On button click");
}

E5 problem after inserted headset

Similar Messages

Maybe you are looking for