E52 black, charge problem

I bought a black E52 but I have a problem.
When I connect the charger to the phone and the phone is off, the battery is NOT recharged and the USB port crashes and also if I start the phone the battery is never charged more (the USB port does not work anymore also if I connect the phone to the computer and the phone is not detected by it). Now if I want charge the battery or use the phone with the computer I must do a Normal or Hard Reset.
Is there anyone that has my same problem ?
PS: But I've seen that when I have the charger problem the USB port works because if I put the charger to the phone off, the battery icon is displayed but it not charge and if I connect the phone to computer with USB the phone is not detect.

I had buy it here http://shop.nokia.it/nokia-it/product.aspx?sku=10201749&culture=it-IT
Thanks

Similar Messages

Does apple make a black charging cable for a MacBook air?

Hi All,
I'm looking for a black charging cable for my new MacBook Air. I realize that this sounds like a ridiculous request, but my cat has an affinity for white cords. Anyone know where I can find one?

Bloody Cats,
I have a similar problem unfortunately they don't, the Patent protection on Apple's Mag Safe tech is mostly likely why you can buy a non Apple one.
Ross/.

3GS charging problem

I have a 3GS with major charging problems. Every time, no matter where, or what, is used, I get an error message and a yellow triangle. I've tried different cab;e It is just over 18 months old and is a replacement for one I drowned!

Hi andygr62,
I'm not sure what the error message says, but there is a troubleshooting charging section in this article.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Resolving issues
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue persists, please contact Apple Support.
Thank you for visiting Apple Support Communities.
Nubz

How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

Macbook Pro 13 (Early 2011) Charging Problems

Recently I noticed that when I charge my macbook pro, the LED light on the magsafe would go green then orange to show that it is charging. However after a few minutes or seconds the orange LED light will go off (Stops Charging) and the whole process of charging starts again, green light then orange then nothing...
I already tried resetting the PRAM and SMU. I also tried using different wall sockets for charging and it yielded the same results. However, when i borrowed my friends mac charger, my MBP manage to charge without any problems. When he used my charger the charging problem also occurred.
So i decided to bring it to an Apple Authorized service provider sine they are no Apple Retail Stores in Thailand. I told the guy at the AASP that my charger was probably broken/faulty, but he said it was the receiver sensor of the macbook pro (The place where i connect the magsafe to my MBP ). He used a different charger (At the counter)and the LED lights when from Green, Orange then yellow and said the MBP needed to be sent to Singapore to be repaired and it would take 10 - 14 days. I said OK since my MBP was still in warranty and it would be free. Next day he called and said he fixed it by resetting something and that I could pick it up. At the AASP, the macbook pro didnt show any charging problems so i brought it home to charge.
Now it has the same charging problem as before...

Do you have another power adapter to try? If so, can you use the power adapter that came with this mac?
Do you have another MBP? If so can you use this power adapter on that MBP?
Are you using another pointing device or is it the one built right into the laptop? If you are using another pointing device try purchasing a new one or disconnecting or reconnecting or even try on another computer.
You might be only able to get buy for the next few month until you graduate until you can get your computer fixed. If all else fails go buy yourself a $8 mouse from a place, it will work until you can get this fixed... or buy apple mice if that is a big deal to you.
Here is one for only 3.18! http://www.bestbuy.com/site/Gear+Head-Computer+-+OM3800U+Mouse/3933383.p?id=1218 443155891&skuId=3933383
Or if you want the one I have used: (M515 @ home or HP Wired Mouse-- Its kind of old) This isn't the exact one but they discontinued that one: http://www.logitech.com/en-us/mice-pointers/mice/devices/mouse-m100 so for $10 you get a mouse and your computer works.

ZEN VISION:M CHARGING PROBLEM - H

[color="#ff0000"]ZEN VISION:M MP3 PLAYER CHARGING PROBLEM?My MP3 player was charging perfectly for the first 4 weeks of its life with me. I usually charged using the USB port on my computer. When connected, the player would come to life and the CHARGING ICON would appear and flash until the unit was fully charged and the CHARGED ICON would come on. Worked well. Now when I connect the player to the computer, instead of the CHARGING ICON coming on, the unit immediately begins playing music or going to the last mode it was in before being shut down previous to connecting for charging.
I have tried a reset of the whole player but that did not make any difference. I?encounter the same problem when connecting the player to the car?charger/power adapter. Can anyone give me some assistance? Cure?Thanks,? David B.

Lobsterboat wrote:
[color="#ff0000"]ZEN VISION:M MP3 PLAYER CHARGING PROBLEMMy MP3 player was charging perfectly for the first 4 weeks of its life with me. I usually charged using the USB port on my computer. When connected, the player would come to life and the CHARGING ICON would appear and flash until the unit was fully charged and the CHARGED ICON would come on. Worked well.Now when I connect the player to the computer, instead of the CHARGING ICON coming on, the unit immediately begins playing music or going to the last mode it was in before being shut down previous to connecting for charging. I have tried a reset of the whole player but that did not make any difference. I encounter the same problem when connecting the player to the car charger/power adapter.Can anyone give me some assistance? Cure?Thanks, David B.
I have exactly the same problem, but its because i've had to re-install windows and it wont deect it atall. Ive emailed creative support waiting for supply. i hope i get an answer soon

2nd dead iPod Touch 4G in 2 months? Battery/charging problems!

Hi everyone,
It seems as of tonight that I will have to return my second iPod Touch 4G in the last two months. In both cases, it was an issue where the device would no longer charge, and became very hot on the top of the back panel when the device was turned on even for a few seconds (while not being plugged in). In the first case, the device seemed to be defective from the time I opened the box, which was confirmed at an Apple Store, but they asked me to ship it to Apple Repair to be checked out. Apple took a very long time to get a replacement to me, but was good about that problem, and I was happy with the replacement for the past month when all of a sudden tonight the new one would not change and became very hot.
Is this an issue that anyone else has seen? I essentially only charged it off of my laptop or a wall charger unit, but it seems like the battery essentially is shorting out. I love this device, but actually need to use a PDA-type device enough that I am questioning whether I should get a replacement or go back to my old Palm TX.
Thanks for any thoughts/feedback on my iPod Touch 4G battery/charging problems.
Message was edited by: eliotjasper

Most battery complaints complain about loss of charge. The iPod is designed to lose heat through the back as the battery discharges. This is most common when using the device a lot - like playing games. If yours will no loner charge, by all means return it to Apple.
As far as being a PDA goes, it is as good as any smart phone out there. The PDA, as you once knew it, is dead and has been for 5+ years. Take your iPod to an Apple store and insist on a replacement.

Syncing and Charging Problem with 1st gen iPod nano

I purchased a 1st generation iPod nano via eBay about 3 months ago and have developed an interesting syncing and charging problem. When I plug the nano to my iMac, frequently neither the computer nor iTunes will recognize it. I have done "the five R's" with occasional success. I've tried jiggling the cable in the computer port and sometimes it works in getting iTunes to recognize the nano, sometimes it doesn't. Even when I am able to get iTunes to recognize the nano, I have frequently found that the nano hasn't charged up at all. In fact, a couple of times I found it almost totally drained of power after having been connected to my computer. Yes, I have the most recent version of iTunes installed on my iMac and my iMac, by the way, is relatively new - having been purchased in May of this year. What is interesting is that I've taken my nano to work and it has absolutely no problem charging up on my Dell (yuk!). For the record, I do not have iTunes installed on my work computer and I am not allowed to add any apps to my work computer without the consent of my supervisor. The chances of getting iTunes installed on my Dell at work are pretty much nil. Any suggestions on how I can fix the problem?

I bought a new USB dock connector and hoped, with fingers and toes crossed, that something positive would happen. Sure enough, I was able to sync and recharge my old iPod nano. I guess the original USB dock cable is on its last legs. Not totally broken, but no longer reliable. I consider my problem solved! My thanks to everyone who took the time to read and try to solve my iPod problem. I greatly appreciate it!

Facing Black catridge problem within 2 months of purchase HP laserjet p1108 by printing 300 pages.

Hullo sir,
I'm Facing Black catridge problem within 2 months of purchase HP laserjet p1108 by printing 300 pages.The printer window shows you have to print pages < 50.what cani do?

Hi @thangaraj,
I see by your post that you have only printed 300 pages and it is now it is showing you have less the 50 pages left.
I would like to help you resolve this issue.
Is this the original toner that shipped with the printer?
You should get approximately 1500 pages according to the specifications for what ships in the box.
The page count is based on page yield. Depending on what you were printing.
Still I believe you should have gotten more then 350 pages, unless you were printing full page pictures in black and white.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Macbook Pro Charge problems

So I have a Macbook Pro I bought in August 2010, which over the last 3 days has started developing charging problems. It does one of the two of the following: I plug the charger in, the charge light will come on and the laptop will charge for about 45 secs before dropping out completely needing to be physically disconnected and switched off at the wall for at least a minute before it starts working again, for the same effect. Or, I plug it in, it charges for about 30 secs, then resets itself as if it had only just been connected, charges for another 30 secs, resets, charges for another 30 secs repeats, etc etc.
Wondering if anyone else has experienced this issue?
As you can imagine, this is making life really REALLY difficult for trying to keep my laptop charged.
I have tried the various tricks listed on the Apple troubleshooting website, and nothing has worked long term. I am sure the power points I am using are good, because they are the same points I use day in and day out at work/school.
I am considering taking the adapter to the nearest Apple Reseller to me, and getting them to check it/replace it if it is naffed. I am also considering getting it replaced with the more powerful 85 watt adapter rather than the 60 watt, if I am able to do so...

There are several reasons that the power adpater is behaving as it does. However, since you've "tried the various tricks listed on the Apple troubleshooting website, and nothing has worked long term", the only thing left is to try a new power adapter. Be sure to bring in your old adapter with your computer.

Lumia 920 - Black update problems, slow app respon...

I have had a lumia for well over a year in the UK, I updated to the black update a week ago, and the phone became completely unresponsive, similar to theDej's problem here: http://discussions.nokia.com/t5/Nokia-Lumia/Phone-inoperative-after-lumia-black-update/m-p/2372351/h...
However, I contacted the carrier (EE) and they replaced the handset. I set up the replacement handset, which then prompted for the update, and I took the plunge and applied it again.
Now, although the handset mostly works, some apps have stopped functioning, and most importantly the WiFi settings and Bluetooth settings pages often become completely unresponsive, drop their connections, and dont show any available connections, so I cant reconnect to WiFi or bluetooth without restarting the phone. Also on some occasions, turning off the phone shows the "goodbye" screen, but either doesn't turn off and returns to the home screen or it magically restarts without me pressing the power button.
Has anyone come across any issues like this, is there anything I can do?

Please, try the Nokia Software Recovery Tool and report your results. We have a lot of Bluetooth/Wi-Fi issues reports since Lumia Black – no problem here. However, we have so many, sounds like several different issues.

Display problem, charging Problem

DISPLAY PROBLEM & CHARGING PROBLEM ACER LIQUID E700, INVOICE NO.S8001A/14-15/6959 INVOICE DT:02-02-2015

rajuwilsonk,
If the phone is not charging I would recommend getting in touch with your reseller or Acer technical support in your area for options.

MSI 290X LE Lightning Edition black screen problem

I recently bought the above graphics card, only to run into problems with black screen, furmark blackscreens when it reaches just over 70c & games that push the card ie Crysis 3 also causes black screen problems, I'm also sometimes getting desktop corruptions, usually after it black screened.
My PSU is a 850watt EVGA SuperNova G2 so i know it's not that what causing the problem.
rest of my setup as follows
3770K @4.2Ghz
MSI Z77 Mpower
8GB corsair memory
ect ect.
Any idea's as to the cause of the problem?
edit here what it doing I've uploaded it to youtube.

First of all remove any oc. Then list specs more detailed: >>Posting Guide<<

1st-Gen iPod charging problems

I have had a 1st-gen iPod touch since Dec 2008 and really love it. One annoying problem that I have found with it is a charging problem that I think that I have finally nailed down. I use a wall charger to charge my iPod while idle and while I use it. When I am using my iPod while charging, I have noticed that it sometimes does not charge properly. It appears that when using certain apps such as Pandora or other non-Apple apps, the battery indicator will go from the charge symbol (lightning bolt) to charged (plug) even if the battery is nearly discharged. I've tried resetting the iPod, etc. and the problem persists. I can switch apps from Pandora to the built-in music player and the batter will resume charging. Does anyone have any details on this behavior? I was unable to find anything searching the web. Thanks!

I have a 2nd gen and have not noticed that with Pandora or actually any other app. That seems pretty strange that an app would suspend charging. You should at least try to correct it with a restart, reset, restore routine. If you are not familiar with how to do these things, it's pretty simple.
Restart - hold the Sleep/Wake button until you see the red slider. Turn the iPod off. Restart by holding the Sleep/Wake button down until you see the Apple logo and release it.
Reset - hold the Sleep/Wake button and the Home button down together for approx. 10 seconds until you see the Apple logo. Release the buttons.
Restore - plug your iPod into iTunes and, on the Summary page, select Restore.

IPod Touch 4G Charging Problems

The third-party charger that I have been using for a year stopped working. I eventually figured out it was the charger, not my PC or iPod. So I use my old Apple charger that came with my iPod which stopped working somewhere in mid 2012 early 2013 (got iPod on Christmas 2011). When my iPod dies, I plug it in with the Apple charger. It will boot up unless I touch it, even a bit, and I have to reconnect it to charge it. Then, while I'm not there, iOS boots, as usual. But, it shows a charging battery in the corner, but the lock screen has my wallpaper, not the battery. Everyonce in a while when it's plugged in, it will go from 20% to having the full charged symbol, and it's not fully charged. Everyonce in a while it also says "Charging not support with this accessory". Also erlier today when my iPod was plugged in, it made the charging sound, one after the other, four times. And nobody was there and the charger was exactly how it was left. It is starting to get really bad and I might get a new (sorry, non-Apple) device. PLEASE HELP! Thank you.

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
could be bad cable or bad'/dirty dock connector in the iPod

E52 black, charge problem

Similar Messages

Maybe you are looking for