E800001 error using Ad-Hoc Distrubition Profile
Hi,
I have been able to successfully deploy an app to my iPhone using the developer profile.
I then created an Ad-Hoc distribution profile, and tried to install my application using that profile.
However, I get the E800001 error.
I double checked the certificates, profiles, etc and am following the steps as outlined in the pdf file in the developer portal.
I also created the Entitlements.plist file.
Strange thing is when I zip the app on a mac and send it to a Win Machine, I get a __MACOSX dir with a file .Entitlements.plist.
Any ideas what I may be doing wrong ?
OK, I figured out what I was doing wrong.
I put the Entitlements.plist file in the wrong location (instead of project root dir)
I had to clean and rebuild a few times, but finally it worked fine !!
Similar Messages
-
Add mobile broadband profile using netsh gives "Invalid Profile XML" error
We're trying to create an automated installation to upgrade to 8.1 Pro soon and since we have our own APN at our provider, we'd like to add this using a script. However when I try to add my XML profile using
netsh mbn add profile interface="Mobile broadband" name="profile.xml"
I receive the following error: Add Profile Failure: Invalid Profile XML.
I've found some Windows 7 topics regarding this issue, pointing at the encoded Subscriber and ICC id's in these XML files. I have already found the unencoded values with
netsh mbn show ready * and added them to the XML file, but still no dice :-(
This is my XML file:
<?xml version="1.0"?><MBNProfile xmlns="http://www.microsoft.com/networking/WWAN/profile/v1">
<Name>My Company Name</Name>
<IsDefault>true</IsDefault>
<ProfileCreationType>UserProvisioned</ProfileCreationType>
<SubscriberID>123451234512345</SubscriberID>
<SimIccID>1234123412341234567</SimIccID>
<HomeProviderName>vodafone NL</HomeProviderName>
<ConnectionMode>auto-home</ConnectionMode>
<Context>
<AccessString>custom.provider.nl</AccessString>
<UserLogonCred>
<UserName>username</UserName>
<Password>p4ssw0rd</Password>
</UserLogonCred>
<Compression>DISABLE</Compression>
<AuthProtocol>NONE</AuthProtocol>
</Context>
<DisplayProviderName xmlns="http://www.microsoft.com/networking/WWAN/profile/v2">My Company Name</DisplayProviderName>
</MBNProfile>
I've removed all existing mobile broadband profiles from the system, netsh mbn show profiles
shows an empty list so it's not a naming issue. I tried removing the XML version header from the file (a lot of examples of these XML files don't have it), leaving the Subscriber and/or ICC ID empty, removed them from the XML file but nothing seems to
work.
Does anyone have some other suggestions?Hi,
I'm sorry for have no idea with your problem. Since those methods you tried but failed, in my opinion, it would be better to use Process Monitor to capture the trace of excuting this XML file.
Start Process Monitor, close as much unrelated process as possible, then run command to enable this XML file.
After error occures, stop capture.
Process Monitor:http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
Roger Lu
TechNet Community Support -
I believe I have implemented it correctly but I am not receiving the notifications on my phone. I have an ad hoc provisioning profile set up. I have the device token from the phone through NSLOG to console. I have the dot net code running without errors.The notifications just don’t appear.
Any ideas where I am going wrong?IMAP account access by itself does not provide for syncing contacts, calendar events, and notes or anything over the air. This is possible with an Exchange account accessed via ActiveSync with the Exchange Server.
If your company email account is an Exchange Account, your company's IT Dept. has enabled IMAP account access for your Exchange account on the Exchange server?
If an Exchange account, the IT Dept. must have ActiveSync enabled for your account on the Exchange Server to create and access the account as an Exchange account which provides Push access for received messages, and over the air syncing for contacts and calendar events with the Exchange Server. -
Yosemite Server: Apache shm errors with proxy_balancer | SASL errors using user alias
Dear OSX Server Ninjas,
I recently upgraded my 10.9.5 Mac mini running Server 3.2.2 to Yosemite + Server v4, directly to v4.0.3. The box serves the whole Mail/Cal/Contacts/VPN palette as well as some websites, Git repos and some custom software. See below for network setup.
After battling the most blatant issues (some easy to fix but hard to find, others hard on both), I'm almost back to a working server setup … but some things keep bugging me even after days of log-reading and OD tricks. In the last days, I have read countless discussions here as well as on stackoverflow/serverfault/apple.stackexchange and blogs, so I'll try to be as thorough and precise as possible to show what I have tried so far – sorry in advance for the long post
… and since you might not read to the bottom: Thanks in advance for any help, especially with the Apache problem!
My setup
OSX Server v4.0.3 running on Yosemite 10.10.1 ➞ both latest official releases
host + DNS
Hostname configured for public domain mydomain.net, web traffic on selected ports comes in through router NAT
Server has a static IP on the local subnet 192.168.178.0/24
Server running local DNS and performing lookups for all clients in the local subnet, forwarding to the router at 192.168.178.1
Primary zone for mydomain.net with records (A, NS, MX) pointing to said static IP
changeip -checkhostname is successful
Public IP is currently configured at the domain registrar through his name servers
SSL
Trusted third-party certificate installed for host.mydomain.net (Common Name + SAN for two subdomains)
Used to secure all services
Qualys SSL Test Grade B (capped due to OSX's openssl 0.9.x not being capable of TLS1.2 and Intermediate CA SHA-1 )
TLS working both inbound and outbound according to CheckTLS.com
OpenDirectory
Recreated after upgrade (probably not necessary, since issue persists), re-imported groups + users from WGM backup files
Only the server itself is bound to the directory, other devices just access services through network accounts (CRAM-MD5, MD5-Digest)
Problems
Apache shm errors: Apache fails to create slot memory when proxy module is enabled
As soon as I start a service which requires the Apache proxy_balancer module (e.g. Cal/Contacts, ProfileManager), this starts filling up my Apache's error log:
[Mon Jan 12 01:41:17.979882 2015] [proxy_balancer:emerg] [pid 2949] (28)No space left on device: AH01179: balancer slotmem_create failed for p26d9e669--1011640492
[Mon Jan 12 01:41:17.979894 2015] [:emerg] [pid 2949] AH00020: Configuration Failed, exiting
[Mon Jan 12 01:41:28.297127 2015] [slotmem_shm:error] [pid 3026] (28)No space left on device: AH02611: create: apr_shm_create(/private/var/run/slotmem-shm-p26d9e669--1001322955.shm) failed
[Mon Jan 12 01:41:28.297347 2015] [proxy_balancer:emerg] [pid 3026] (28)No space left on device: AH01179: balancer slotmem_create failed for p26d9e669--1001322955
[Mon Jan 12 01:41:28.297355 2015] [:emerg] [pid 3026] AH00020: Configuration Failed, exiting
When I increase the Apache LogLevel to trace1, I get this as well:
[Mon Jan 12 02:11:43.190303 2015] [slotmem_shm:debug] [pid 5501] mod_slotmem_shm.c(367): AH02602: create didn't find /private/var/run/slotmem-shm-p26d9e669-813569972.shm in global list
This causes the Apache to crash constantly, which is … unnerving. After googling around for a while, I tried the following steps:
Stop Services that use the Apache (Web, *DAV, ProfileManager)
sudo apachectl stop
Remove all orphan cache/slot files (.shm, ssl-cache, proxy.*) from /private/var/run
Reboot the server
Start up the Services again
Curiously enough, this worked for a while! But I was getting several log messages about dropped proxy connections, and sometimes the ProfileManager page would time out. Then, the issue started to reappear and does not seem to be fixed again with the steps above. I looked through the Apache config files and config plists for the Services in question, as well as the default config files. The only thing I have so far is that as long as there are no active proxy connections, the Apache runs smoothly – but all goes awry when slotmem files are created (a lot of them). Sometimes, I am able to turn on the Calendar service, but switching on Contacts produces the error … one time, I even got Calendar + Contacts running, and all went well until I enabled Profile Manager.
I found several error reports with similar or identical errors from other Apache 2.4.x users, but most of those were developer talk on mailing lists, or suggested steps that did not work for me (or were inapplicable on the OS X Server Apache environment).
SASL errors using user alias for WebDAV-Digest authentication
Short version: I am unable to authenticate through WebDAV-Digest with a user's alias (defined in Server Admin > Users > Context Menu > Advanced Options or WGM). Using the main short name of the same user works flawlessly. Password Server Error log just shows:
AUTH2: {234023578237md5hash2384234, mainshortname} WEBDAV-DIGEST authentication failed, SASL error -13 (password incorrect).
The password is 100% correct: When I set up a test CalDAV account and put in alias+PW, it did not work (OS X Dialog showed “could not be verified”, Server log as above). Leaving the password field filled and just switching the user to the main short name went through instantaneously, with the Server log showing
AUTH2: {234023578237md5hash2384234, mainshortname} WEBDAV-DIGEST authentication succeeded.
Notice the same MD5 hash and canonical short name, yet different results. I don't know if this is a new “feature”, a result of mail aliases being handled differently (at least I read that somewhere) …
Additional Questions
Should I configure the DNS for public use, instead of the Split-Brain configuration (local network gets local IP, outside traffic is directed by registrar NS)? I read several articles explaining that Split-Brain is common in large organizations, but might introduce weird networking issues. Entering the external IP as a Round Robin alternative for the internal does not seem sensible to me.
I also have a question concerning LDAP log entries like this one below, but I'll put that in this already open discussion:
=> bdb_idl_delete_key: c_get failed: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock (-30994)Today the same error occurred on a customers server.
We don't use Calendar or Contacts.
We only have some websites configured and want use NetInstall for deployments.
As soon as I disable the Profilemanager the httpd starts over and other websites and NetInstall via HTTP are working fine.
When I reenable Profilemanager the httpd processes are gone and I see the same stuff in Apache's error log... -
Error when determining the CTIADM_PROF profile for agent xyz
Hi,
I have created the new cic frame work and assigned it to the position. when i run the TC - cic0, I am getting the following
"Error when determining the CTIADM_PROF profile for agent xyz"
Can you help me out ?
Thanks in advanceHi Devi,
Problem is your IC winclient profile definition don't have any profile definition for CTIAMD_PROF assigned to it.
For this you can use standard profiles or may create your own CTI Component profile.
Follow IMG path:
Customer Relationship Managemet>Interaction Center WinClient>Component Configuration>Hidden Components>Configuration of CTI Component-->Define CTI Component Profile
Use this profile defintion to assign it to CTIAMD_PROF in you IC winclient profile definition.
Best Regards,
Pratik Patel
<b>Reward with POints!</b> -
Error when determining the CTIADM_PROF profile for Agent 1010301
Hi,
here problem is while opening the cic win( Trn : CIC0 - Customer Interaction Center) it's throwing <b>error when determining the CTIADM_PROF profile for Agent 1010301</b>
pls. any ideas would be greatfull.
ThanksHi,
please check the following.
1. Make sure in the CIC profile (transaction CICo), a profile category
CTIADM_PROF is there and a valid profile is assigned.
Or, if no telephony should be used, make sure telephony and its com-
ponents are switched off on the CIC framework (transaction
CRMC_CIC_FW_MAINTAIN)
2. in the standard system, when you start your CIC, the framework is
taken from the highest org-unit and the components are taken from the
lowest level.
If you use more then one level of org-unit, please make sure that they
use the same framework to prevent the mentioned problems.
hopefully this helps!
Regards, Gerhard -
Install error for Ad Hoc build
I am trying to send an Ad Hoc distribution of my app to my friend for testing.
I created an Ad Hoc provisioning profile at the portal with the UDID of my friend's iPhone. I installed it in Xcode. I created the Ad Hoc configuration (which is a copy of the Release configuration). Next I added the Entitlements.plist file and specified it for the Code-signing.
I am able to Build & Archive successfully and install it on my device thru the iPhone. However, when my friend tries to install it, an error is displayed:
The app "appName" was not installed on the iphone "Friend's iPhone" because the signer is not valid.In the Build Info, I see that for the Ad Hoc configuration, the Code Signing Identity for Any iOS is set to my Distribution profile - not the Ad Hoc provisioning profile.
In fact, the Ad Hoc provisioning profile is not even listed in the list...may be that's what is wrong!
All I need to know is how to update that list to that the new prov profile is listed there -
Error message when assign task profile
Hi Expert,
SAP system 4.0B, i create a new activity group in PFCG and assign responsibility in it.
I already generate the responsibility and when i assign to user id in SU01 error message come out.
Profile for activity group not yet generated
Message no. 01 070
Diagnosis
You are assigning a user with an activity group. Although this activity
group already has a designated profile name, the profile has not yet been
generated.
System response
The user does not yet have the designated profile.
Procedure
Use the Profile Generator if you want to generate a profile. Remember
that you that you must execute a user comparison once you have generated
the profile.
As i already generate the activity, why the system still say that the activity group not yet generated?
Please advice.
Thanks
regards,
ng chong chuanHi Alex Ayers,
The error when double click, there was nothing pop up.
After generation in SUPC for responsibility RY type and the status show "Generation here not allowed/possible".
SAP version 4.0B.
Please advice.
Thanks.
regards,
ng chong chuan -
I am unable to start Firefox. Getting message that it's already running. Can't find my profile using "%APPDATA%\Mozilla\Firefox\Profiles|". Rebooting my computer didn't help. Since I experienced that problem I also noticed that all my bookmarks which I had copied into the Windows Internet Explorer have also disappeared. I am using Firefox as my primary search engine and usually don't use Internet Explorer. I am running Windows 7 on my machine.
Try this add on [https://addons.mozilla.org/en-US/firefox/addon/open-profile-folder/ Open Profile Folder]
-
Error message: AgServerMigration ERROR Using store provider as a session is deprecated.
Hi. I'm using a MacBook Pro, OS X 10.6.5. I have been opening files in Lightroom, editing them, and then doing finishing touches in CS5. When I save the file in CS5 and close it, my Mac returns the above message in Console eight times:
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
I have no idea what this means, or whether it is a problem. Does anyone know what this is?
Thanks.I see the same thing and have done for some time. The actual file is being saved back. etc. So, in that respect both Lr and Ps are working fine. IOW, ignore it.
-
Received HTTP response code 500 : Internal Server Error using connection Fi
Hi everybody,
I have configured a file-webservice-file without BPM scenario...as explained by Bhavesh in the following thread:
File - RFC - File without a BPM - Possible from SP 19.
I have used a soap adapter (for webservice) instead of rfc .My input file sends the date as request message and gets the sales order details from the webservice and then creates a file at my sender side.
I monitored the channels in the Runtime work bench and the error is in the sender ftp channel.The other 2 channel status is "not used" in RWB.
1 sender ftp channel
1 receiver soap channel
1 receiver ftp channel.
2009-12-16 15:02:00 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS EO
2009-12-16 15:02:00 Information MP: entering1
2009-12-16 15:02:00 Information MP: processing local module localejbs/AF_Modules/RequestResponseBean
2009-12-16 15:02:00 Information RRB: entering RequestResponseBean
2009-12-16 15:02:00 Information RRB: suspending the transaction
2009-12-16 15:02:00 Information RRB: passing through ...
2009-12-16 15:02:00 Information RRB: leaving RequestResponseBean
2009-12-16 15:02:00 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:02:00 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:00 Information Trying to put the message into the call queue.
2009-12-16 15:02:00 Information Message successfully put into the queue.
2009-12-16 15:02:00 Information The message was successfully retrieved from the call queue.
2009-12-16 15:02:00 Information The message status was set to DLNG.
2009-12-16 15:02:02 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:02 Error The message status was set to FAIL.
Please help.
thanks a lot
RamyaHi Suraj,
You are right.The webservice is not invoked.I see the same error in the sender channel and the receiver soap channel status is "never used".
2009-12-16 15:52:25 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS BE
2009-12-16 15:52:25 Information MP: entering1
2009-12-16 15:52:25 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:52:25 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:25 Information Trying to put the message into the call queue.
2009-12-16 15:52:25 Information Message successfully put into the queue.
2009-12-16 15:52:25 Information The message was successfully retrieved from the call queue.
2009-12-16 15:52:25 Information The message status was set to DLNG.
2009-12-16 15:52:27 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:27 Error The message status was set to FAIL.
what can I do about this?
thanks,
Ramya -
Error in Windows 7: User Profile Service was not logged on. The user and administratorprofile
Error in Windows 7: User Profile Service was not logged on. The user profile can not be loaded. Administrator profile and the code does not work. What do I do?
HP G5384sc desktop pcHello
Unfortunately I did not manage to fix my computer yet. My printer is broken so I bought a new one, but since I do not have administrator rights, I can not connect the new printer, so I have to write all-installing notes down with pencil and simultaneously translate them into Danish so it is a very slow process. I'll tell you if it succeeds, otherwise there is of course the primitive way to buy a new computer, but it's the same as giving up. Not yet.
Until now, many thanks for the good suggestions.
Kind regards
Birgeres -
Getting "Method 'sign_in' does not exist" Error (using Charles)
This may be a bit off the FLEX field, and have to do with Zend Framework's ZEND_AMF class. Unfortunately I haven't been able to dig anything up, and comments posted on Wade Arnolds site have not received any responses, so I thought I'd give it a go here.
My ServiceController Class:
public function loginAction()
$this->_helper->viewRenderer->setNoRender();
$server = new Zend_Amf_Server();
$server->setClass('LoginAmfService', 'LoginService');
$server->setClassMap('CurrentUserVO', 'CurrentUserVO');
$server->setProduction(false);
print($server->handle());
My LoginAmfService class:
class LoginAmfService
* Main login function.
* @param string $name
* @param string $password
* @return CurrentUserVO
public function sign_in($name, $password)
$authAdapter = new Zend_Auth_Adapter_DbTable(Zend_Registry::get('db'), 'users', 'user_name', 'password', 'PASSWORD(?) AND active = 1');
$returnValue = new CurrentUserVO();
$authAdapter->setIdentity(htmlspecialchars($name))
->setCredential(htmlspecialchars($password));
$authResult = $authAdapter->authenticate();
if ($authResult->isValid())
$userArray = $authAdapter->getResultRowObject(array('id', 'first_name', 'last_name', 'title', 'photo'));
$returnValue->first_name = $userArray->first_name;
$returnValue->last_name = $userArray->last_name;
$returnValue->title = $userArray->title;
$returnValue->photo = $userArray->photo;
$returnValue->token = $userArray->id;
return $returnValue;
* Function used to log people off.
public function sign_out()
$authAdapter = Zend_Auth::getInstance();
$authAdapter->clearIdentity();
My SignIn FLEX module (the relevant portions):
<mx:RemoteObject
id="LoginRemote"
destination="login"
source="SignIn"
showBusyCursor="true"
fault="parentDocument.handleFault(event)"
>
<mx:method name="sign_in" result="signin_handle(event)" />
<mx:method name="sign_out" result="signout_handle(event)" />
</mx:RemoteObject>
<mx:Script>
<![CDATA[
import mx.rpc.events.FaultEvent;
import mx.utils.ArrayUtil;
import mx.rpc.events.ResultEvent;
import mx.controls.Alert;
import com.brassworks.ValueObjects.CurrentUserVO;
import mx.events.VideoEvent;
[Bindable]
private var this_user:CurrentUserVO = new CurrentUserVO();
private function mdl_init():void
focusManager.setFocus(txt_username);
private function signin_handle(event:ResultEvent):void
this_user = event.result as CurrentUserVO;
if (this_user.token == null) {Alert.show("Supplied login credentials are not valid. Please try again.");}
else
this.parentApplication.setUser(this.this_user);
private function signout_handle(event:ResultEvent):void
private function sign_in(event:Event):void
try
//Alert.show(txt_name.text + "|" + txt_password.text);
LoginRemote.sign_in(txt_username.text, txt_password.text);
catch (error:Error)
this.parentDocument.handleFault(error);
private function sign_out(event:Event):void
private function show_error(error:Error, s_function:String):void
Alert.show("Method:" + s_function + "\nName: " + error.name + "\nID: " + error.errorID + "\nMessage: " + error.message + "\nStack Trace: " + error.getStackTrace() + "\nError: " + error.toString());
private function handleFault(event:FaultEvent):void
Alert.show(event.fault.faultDetail, event.fault.faultString);
]]>
</mx:Script>
Now, all this is great and good, as it works with Zend Framework 1.7.6. However, when I try to upgrade to 1.7.8 (to take advantage of session management and other bug-fixes), I get the following error (using Charles):
#1 /var/web/htdocs/core/library/Zend/Amf/Server.php(390): Zend_Amf_Server->_handle(Object(Zend_Amf_Request_Http))
#2 /var/web/htdocs/core/application/default/controllers/ServicesController.php(73): Zend_Amf_Server->handle()
#3 /var/web/htdocs/core/library/Zend/Controller/Action.php(503): ServicesController->loginAction()
#4 /var/web/htdocs/core/library/Zend/Controller/Dispatcher/Standard.php(285): Zend_Controller_Action->dispatch('loginAction')
#5 /var/web/htdocs/core/library/Zend/Controller/Front.php(934): Zend_Controller_Dispatcher_Standard->dispatch(Object(Zend_Controller_Request_Http), Object(Zend_Controller_Response_Http))
#6 /var/web/htdocs/core/application/bootstrap.php(39): Zend_Controller_Front->dispatch()
#7 /var/web/htdocs/core/public/index.php(5): Bootstrap->runApp()
#8 {main} ?Method "sign_in" does not exist
I have no idea why this would not work anymore. My assumption is that I am not correctly setting up Zend_Amf (but then again, my counter-argument is that it worked before, so ..... ????)
Thanks for any help!
-MikeFor those that are also fighting this issue:
The problem appears to be that the RemoteObject needs to specify the class containing the methods as a source parameter. According to this bug report (http://framework.zend.com/issues/browse/ZF-5168) it is supposed to have been addressed, but apparently has re-emerged in Zend_Amf since version 1.7.7.
Using my example above, I would have to specify the RO as:
<mx:RemoteObject
id="LoginRemote"
destination="login"
source="LoginAmfService"
showBusyCursor="true"
fault="parentDocument.handleFault(event)"
>
<mx:method name="sign_in" result="signin_handle(event)" />
<mx:method name="sign_out" result="signout_handle(event)" />
</mx:RemoteObjecct> -
Error Message: User has no profile in this organization
Error Message: "User has no profile in this organization."
Chrome browser. Am downloading Mozilla in the meantime and will report after.
Attempting to log into various TV subscription cable channels with a valid ID and password which ordinarily allows me to enter the on lne version of the cable channel, such as HBO and TNT and USA. Works fine on Showtime. Something is local to these channels, I suppose yet suggesting that something in the computer is blocking also. Everything worked fine with my HP notebook, all subscription/ login required channels were accessble but this new computer actually refurbished but like new) an HP Elite sff 8000 seems to be blocking me from logging in. Could it be the cable channels? Also got a message that indicated something about "User repository". Please sugget a detailed fix if there is one from this information.
HP Elite 8000 SFF, (Desktop) WIN 8.1 Professional, Intel Core 2 Quad 2.83GHz processor. Internal 750GB HDD. 8GB RAM memory. 3 external HDDs : 1TB primary external, 1.5TB backup external, special backup 250GB external (all externals for files, music, video). Please note: 750GB HDD for WIN OS and programs only. Backed up to an 80GB external Image Maker via WIN 7 system image maker. 1 DVDRW drive. 10 USB ports. Plus there are four extra USB via PCI card. 14 USB ports in all. 240 W power supply. Printers: LJ 1020, HP AIO 6480. 3 Monitors, 20" Acer; 22" Acer; 37" LG TV.
ALSO:
HP ENVY: 15 ENVY 15634 Laptop 8GB Memory 750GB Hard Drive Natural Silver
And:
HP DV6928us, (Notebook)
AND:
external 1.0TB HDD, 250GB external HDD, 1.5 TB external HDD,
AND:
HP LJ 1020,
and:
HP J 6480 AIO,
Windows 7 Home Premium on Desktop, WIN8 on ENVYDid you have any luck with FireFox?
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Does anyone know how to delete a template created in error using PAGES?
I created some templates in error using PAGES and cannot figure out how to remove them/delete them. Anyone know how to do this? Fran
Look in the More like this on the right.
Maybe you are looking for
-
Hi, I have developed a ALV report . I also want to take the print out of this report. How can i do this.
-
I can't see my child's iphone 5 (running iOS 8) in find a friend when not connected to wifi?
I can't see my child's iphone 5 (running iOS 8) in find a friend when it's not connected to wifi? please help.
-
After Effects crash when calling ProjSuite5()- AEGP_OpenProjectFromPath
I'm running 12.2 I have code that opens a project. The only time this code doesn't make after effects crash is in the ImportFile command method; however, I'm trying to run a server ontop of my plugin so I can control after effects remotely. AEGP_Proj
-
Hi everybody can you tell me what kind of format do i have to save my html file to be able to insert it in an email ??? Many Thanks Chilli
-
Screen on Macbook 2009 stays dark after Yosemite install
My Macbook and screen were running perfectly fine, then after the Yosemite update completed my screen has been dark ever since. I can use a second monitor and see everything, and my laptop screen sometimes stays lit for a few minutes to an hour, but